Previously, it fails as below:
-------------
root@lkp-skl-d01 /opt/rootfs/v5.14-rc4/tools/testing/selftests/bpf# ./test_doc_build.sh
++ realpath --relative-to=/opt/rootfs/v5.14-rc4/tools/testing/selftests/bpf ./test_doc_build.sh
+ SCRIPT_REL_PATH=test_doc_build.sh
++ dirname test_doc_build.sh
+ SCRIPT_REL_DIR=.
++ realpath /opt/rootfs/v5.14-rc4/tools/testing/selftests/bpf/./../../../../
+ KDIR_ROOT_DIR=/opt/rootfs/v5.14-rc4
+ cd /opt/rootfs/v5.14-rc4
+ for tgt in docs docs-clean
+ make -s -C /opt/rootfs/v5.14-rc4/. docs
make: *** No rule to make target 'docs'. Stop.
+ for tgt in docs docs-clean
+ make -s -C /opt/rootfs/v5.14-rc4/. docs-clean
make: *** No rule to make target 'docs-clean'. Stop.
-----------
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Li Zhijian <[email protected]>
---
tools/testing/selftests/bpf/test_doc_build.sh | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/tools/testing/selftests/bpf/test_doc_build.sh b/tools/testing/selftests/bpf/test_doc_build.sh
index ed12111cd2f0..d67ced95a6cf 100755
--- a/tools/testing/selftests/bpf/test_doc_build.sh
+++ b/tools/testing/selftests/bpf/test_doc_build.sh
@@ -4,9 +4,10 @@ set -e
# Assume script is located under tools/testing/selftests/bpf/. We want to start
# build attempts from the top of kernel repository.
-SCRIPT_REL_PATH=$(realpath --relative-to=$PWD $0)
+SCRIPT_REL_PATH=$(realpath $0)
SCRIPT_REL_DIR=$(dirname $SCRIPT_REL_PATH)
-KDIR_ROOT_DIR=$(realpath $PWD/$SCRIPT_REL_DIR/../../../../)
+KDIR_ROOT_DIR=$(realpath $SCRIPT_REL_DIR/../../../../)
+SCRIPT_REL_DIR=$(dirname $(realpath --relative-to=$KDIR_ROOT_DIR $SCRIPT_REL_PATH))
cd $KDIR_ROOT_DIR
for tgt in docs docs-clean; do
--
2.32.0
For 'make run_tests':
selftests will build bpftool into tools/testing/selftests/bpf/tools/sbin/bpftool
by default.
==================
root@lkp-skl-d01 /opt/rootfs/v5.14-rc4# make -C tools/testing/selftests/bpf run_tests
make: Entering directory '/opt/rootfs/v5.14-rc4/tools/testing/selftests/bpf'
MKDIR include
MKDIR libbpf
MKDIR bpftool
[...]
GEN /opt/rootfs/v5.14-rc4/tools/testing/selftests/bpf/tools/build/bpftool/profiler.skel.h
CC /opt/rootfs/v5.14-rc4/tools/testing/selftests/bpf/tools/build/bpftool/prog.o
GEN /opt/rootfs/v5.14-rc4/tools/testing/selftests/bpf/tools/build/bpftool/pid_iter.skel.h
CC /opt/rootfs/v5.14-rc4/tools/testing/selftests/bpf/tools/build/bpftool/pids.o
LINK /opt/rootfs/v5.14-rc4/tools/testing/selftests/bpf/tools/build/bpftool/bpftool
INSTALL bpftool
GEN vmlinux.h
[...]
# test_feature_dev_json (test_bpftool.TestBpftool) ... ERROR
# test_feature_kernel (test_bpftool.TestBpftool) ... ERROR
# test_feature_kernel_full (test_bpftool.TestBpftool) ... ERROR
# test_feature_kernel_full_vs_not_full (test_bpftool.TestBpftool) ... ERROR
# test_feature_macros (test_bpftool.TestBpftool) ... Error: bug: failed to retrieve CAP_BPF status: Invalid argument
# ERROR
#
# ======================================================================
# ERROR: test_feature_dev_json (test_bpftool.TestBpftool)
# ----------------------------------------------------------------------
# Traceback (most recent call last):
# File "/opt/rootfs/v5.14-rc4/tools/testing/selftests/bpf/test_bpftool.py", line 57, in wrapper
# return f(*args, iface, **kwargs)
# File "/opt/rootfs/v5.14-rc4/tools/testing/selftests/bpf/test_bpftool.py", line 82, in test_feature_dev_json
# res = bpftool_json(["feature", "probe", "dev", iface])
# File "/opt/rootfs/v5.14-rc4/tools/testing/selftests/bpf/test_bpftool.py", line 42, in bpftool_json
# res = _bpftool(args)
# File "/opt/rootfs/v5.14-rc4/tools/testing/selftests/bpf/test_bpftool.py", line 34, in _bpftool
# return subprocess.check_output(_args)
# File "/usr/lib/python3.7/subprocess.py", line 395, in check_output
# **kwargs).stdout
# File "/usr/lib/python3.7/subprocess.py", line 487, in run
# output=stdout, stderr=stderr)
# subprocess.CalledProcessError: Command '['bpftool', '-j', 'feature', 'probe', 'dev', 'dummy0']' returned non-zero exit status 255.
#
==================
Signed-off-by: Li Zhijian <[email protected]>
---
tools/testing/selftests/bpf/test_bpftool.sh | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/tools/testing/selftests/bpf/test_bpftool.sh b/tools/testing/selftests/bpf/test_bpftool.sh
index 66690778e36d..6b7ba19be1d0 100755
--- a/tools/testing/selftests/bpf/test_bpftool.sh
+++ b/tools/testing/selftests/bpf/test_bpftool.sh
@@ -2,4 +2,9 @@
# SPDX-License-Identifier: GPL-2.0
# Copyright (c) 2020 SUSE LLC.
+SCRIPT_DIR=$(dirname $(realpath $0))
+
+# 'make -C tools/testing/selftests/bpf' will install to BPFTOOL_INSTALL_PATH
+BPFTOOL_INSTALL_PATH="$SCRIPT_DIR"/tools/sbin
+export PATH=$BPFTOOL_INSTALL_PATH:$PATH
python3 -m unittest -v test_bpftool.TestBpftool
--
2.32.0
- 'make install' will install bpftool to INSTALL_PATH/bpf/bpftool
- add INSTALL_PATH/bpf to PATH
Signed-off-by: Li Zhijian <[email protected]>
---
tools/testing/selftests/bpf/Makefile | 4 +++-
tools/testing/selftests/bpf/test_bpftool.sh | 3 ++-
2 files changed, 5 insertions(+), 2 deletions(-)
diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile
index f405b20c1e6c..c6ca1b8e33d5 100644
--- a/tools/testing/selftests/bpf/Makefile
+++ b/tools/testing/selftests/bpf/Makefile
@@ -85,7 +85,7 @@ TEST_PROGS_EXTENDED := with_addr.sh \
TEST_GEN_PROGS_EXTENDED = test_sock_addr test_skb_cgroup_id_user \
flow_dissector_load test_flow_dissector test_tcp_check_syncookie_user \
test_lirc_mode2_user xdping test_cpp runqslower bench bpf_testmod.ko \
- xdpxceiver xdp_redirect_multi
+ xdpxceiver xdp_redirect_multi test_bpftool.py
TEST_CUSTOM_PROGS = $(OUTPUT)/urandom_read
@@ -187,6 +187,8 @@ $(OUTPUT)/runqslower: $(BPFOBJ) | $(DEFAULT_BPFTOOL)
BPFOBJ=$(BPFOBJ) BPF_INCLUDE=$(INCLUDE_DIR) && \
cp $(SCRATCH_DIR)/runqslower $@
+TEST_GEN_PROGS_EXTENDED += $(DEFAULT_BPFTOOL)
+
$(TEST_GEN_PROGS) $(TEST_GEN_PROGS_EXTENDED): $(OUTPUT)/test_stub.o $(BPFOBJ)
$(OUTPUT)/test_dev_cgroup: cgroup_helpers.c
diff --git a/tools/testing/selftests/bpf/test_bpftool.sh b/tools/testing/selftests/bpf/test_bpftool.sh
index 6b7ba19be1d0..50cf9d3645d2 100755
--- a/tools/testing/selftests/bpf/test_bpftool.sh
+++ b/tools/testing/selftests/bpf/test_bpftool.sh
@@ -2,9 +2,10 @@
# SPDX-License-Identifier: GPL-2.0
# Copyright (c) 2020 SUSE LLC.
+# 'make -C tools/testing/selftests/bpf install' will install to SCRIPT_PATH
SCRIPT_DIR=$(dirname $(realpath $0))
# 'make -C tools/testing/selftests/bpf' will install to BPFTOOL_INSTALL_PATH
BPFTOOL_INSTALL_PATH="$SCRIPT_DIR"/tools/sbin
-export PATH=$BPFTOOL_INSTALL_PATH:$PATH
+export PATH=$SCRIPT_DIR:$BPFTOOL_INSTALL_PATH:$PATH
python3 -m unittest -v test_bpftool.TestBpftool
--
2.32.0
On Thu, Aug 19, 2021 at 12:27 AM Li Zhijian <[email protected]> wrote:
>
> Previously, it fails as below:
> -------------
> root@lkp-skl-d01 /opt/rootfs/v5.14-rc4/tools/testing/selftests/bpf# ./test_doc_build.sh
> ++ realpath --relative-to=/opt/rootfs/v5.14-rc4/tools/testing/selftests/bpf ./test_doc_build.sh
> + SCRIPT_REL_PATH=test_doc_build.sh
> ++ dirname test_doc_build.sh
> + SCRIPT_REL_DIR=.
> ++ realpath /opt/rootfs/v5.14-rc4/tools/testing/selftests/bpf/./../../../../
> + KDIR_ROOT_DIR=/opt/rootfs/v5.14-rc4
> + cd /opt/rootfs/v5.14-rc4
> + for tgt in docs docs-clean
> + make -s -C /opt/rootfs/v5.14-rc4/. docs
> make: *** No rule to make target 'docs'. Stop.
> + for tgt in docs docs-clean
> + make -s -C /opt/rootfs/v5.14-rc4/. docs-clean
> make: *** No rule to make target 'docs-clean'. Stop.
> -----------
>
> Reported-by: kernel test robot <[email protected]>
> Signed-off-by: Li Zhijian <[email protected]>
Acked-by: Song Liu <[email protected]>
> ---
> tools/testing/selftests/bpf/test_doc_build.sh | 5 +++--
> 1 file changed, 3 insertions(+), 2 deletions(-)
>
> diff --git a/tools/testing/selftests/bpf/test_doc_build.sh b/tools/testing/selftests/bpf/test_doc_build.sh
> index ed12111cd2f0..d67ced95a6cf 100755
> --- a/tools/testing/selftests/bpf/test_doc_build.sh
> +++ b/tools/testing/selftests/bpf/test_doc_build.sh
> @@ -4,9 +4,10 @@ set -e
>
> # Assume script is located under tools/testing/selftests/bpf/. We want to start
> # build attempts from the top of kernel repository.
> -SCRIPT_REL_PATH=$(realpath --relative-to=$PWD $0)
> +SCRIPT_REL_PATH=$(realpath $0)
> SCRIPT_REL_DIR=$(dirname $SCRIPT_REL_PATH)
> -KDIR_ROOT_DIR=$(realpath $PWD/$SCRIPT_REL_DIR/../../../../)
> +KDIR_ROOT_DIR=$(realpath $SCRIPT_REL_DIR/../../../../)
> +SCRIPT_REL_DIR=$(dirname $(realpath --relative-to=$KDIR_ROOT_DIR $SCRIPT_REL_PATH))
> cd $KDIR_ROOT_DIR
>
> for tgt in docs docs-clean; do
> --
> 2.32.0
>
>
>
On Thu, Aug 19, 2021 at 12:27 AM Li Zhijian <[email protected]> wrote:
>
> For 'make run_tests':
> selftests will build bpftool into tools/testing/selftests/bpf/tools/sbin/bpftool
> by default.
>
> ==================
> root@lkp-skl-d01 /opt/rootfs/v5.14-rc4# make -C tools/testing/selftests/bpf run_tests
> make: Entering directory '/opt/rootfs/v5.14-rc4/tools/testing/selftests/bpf'
> MKDIR include
> MKDIR libbpf
> MKDIR bpftool
> [...]
> GEN /opt/rootfs/v5.14-rc4/tools/testing/selftests/bpf/tools/build/bpftool/profiler.skel.h
> CC /opt/rootfs/v5.14-rc4/tools/testing/selftests/bpf/tools/build/bpftool/prog.o
> GEN /opt/rootfs/v5.14-rc4/tools/testing/selftests/bpf/tools/build/bpftool/pid_iter.skel.h
> CC /opt/rootfs/v5.14-rc4/tools/testing/selftests/bpf/tools/build/bpftool/pids.o
> LINK /opt/rootfs/v5.14-rc4/tools/testing/selftests/bpf/tools/build/bpftool/bpftool
> INSTALL bpftool
> GEN vmlinux.h
> [...]
> # test_feature_dev_json (test_bpftool.TestBpftool) ... ERROR
> # test_feature_kernel (test_bpftool.TestBpftool) ... ERROR
> # test_feature_kernel_full (test_bpftool.TestBpftool) ... ERROR
> # test_feature_kernel_full_vs_not_full (test_bpftool.TestBpftool) ... ERROR
> # test_feature_macros (test_bpftool.TestBpftool) ... Error: bug: failed to retrieve CAP_BPF status: Invalid argument
> # ERROR
> #
> # ======================================================================
> # ERROR: test_feature_dev_json (test_bpftool.TestBpftool)
> # ----------------------------------------------------------------------
> # Traceback (most recent call last):
> # File "/opt/rootfs/v5.14-rc4/tools/testing/selftests/bpf/test_bpftool.py", line 57, in wrapper
> # return f(*args, iface, **kwargs)
> # File "/opt/rootfs/v5.14-rc4/tools/testing/selftests/bpf/test_bpftool.py", line 82, in test_feature_dev_json
> # res = bpftool_json(["feature", "probe", "dev", iface])
> # File "/opt/rootfs/v5.14-rc4/tools/testing/selftests/bpf/test_bpftool.py", line 42, in bpftool_json
> # res = _bpftool(args)
> # File "/opt/rootfs/v5.14-rc4/tools/testing/selftests/bpf/test_bpftool.py", line 34, in _bpftool
> # return subprocess.check_output(_args)
> # File "/usr/lib/python3.7/subprocess.py", line 395, in check_output
> # **kwargs).stdout
> # File "/usr/lib/python3.7/subprocess.py", line 487, in run
> # output=stdout, stderr=stderr)
> # subprocess.CalledProcessError: Command '['bpftool', '-j', 'feature', 'probe', 'dev', 'dummy0']' returned non-zero exit status 255.
> #
> ==================
>
> Signed-off-by: Li Zhijian <[email protected]>
Acked-by: Song Liu <[email protected]>
> ---
> tools/testing/selftests/bpf/test_bpftool.sh | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/tools/testing/selftests/bpf/test_bpftool.sh b/tools/testing/selftests/bpf/test_bpftool.sh
> index 66690778e36d..6b7ba19be1d0 100755
> --- a/tools/testing/selftests/bpf/test_bpftool.sh
> +++ b/tools/testing/selftests/bpf/test_bpftool.sh
> @@ -2,4 +2,9 @@
> # SPDX-License-Identifier: GPL-2.0
> # Copyright (c) 2020 SUSE LLC.
>
> +SCRIPT_DIR=$(dirname $(realpath $0))
> +
> +# 'make -C tools/testing/selftests/bpf' will install to BPFTOOL_INSTALL_PATH
> +BPFTOOL_INSTALL_PATH="$SCRIPT_DIR"/tools/sbin
> +export PATH=$BPFTOOL_INSTALL_PATH:$PATH
> python3 -m unittest -v test_bpftool.TestBpftool
> --
> 2.32.0
>
>
>
On Thu, Aug 19, 2021 at 12:28 AM Li Zhijian <[email protected]> wrote:
>
> - 'make install' will install bpftool to INSTALL_PATH/bpf/bpftool
> - add INSTALL_PATH/bpf to PATH
>
> Signed-off-by: Li Zhijian <[email protected]>
Acked-by: Song Liu <[email protected]>
With one nit below:
> ---
> tools/testing/selftests/bpf/Makefile | 4 +++-
> tools/testing/selftests/bpf/test_bpftool.sh | 3 ++-
> 2 files changed, 5 insertions(+), 2 deletions(-)
>
> diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile
> index f405b20c1e6c..c6ca1b8e33d5 100644
> --- a/tools/testing/selftests/bpf/Makefile
> +++ b/tools/testing/selftests/bpf/Makefile
> @@ -85,7 +85,7 @@ TEST_PROGS_EXTENDED := with_addr.sh \
> TEST_GEN_PROGS_EXTENDED = test_sock_addr test_skb_cgroup_id_user \
> flow_dissector_load test_flow_dissector test_tcp_check_syncookie_user \
> test_lirc_mode2_user xdping test_cpp runqslower bench bpf_testmod.ko \
> - xdpxceiver xdp_redirect_multi
> + xdpxceiver xdp_redirect_multi test_bpftool.py
>
> TEST_CUSTOM_PROGS = $(OUTPUT)/urandom_read
>
> @@ -187,6 +187,8 @@ $(OUTPUT)/runqslower: $(BPFOBJ) | $(DEFAULT_BPFTOOL)
> BPFOBJ=$(BPFOBJ) BPF_INCLUDE=$(INCLUDE_DIR) && \
> cp $(SCRATCH_DIR)/runqslower $@
>
> +TEST_GEN_PROGS_EXTENDED += $(DEFAULT_BPFTOOL)
> +
> $(TEST_GEN_PROGS) $(TEST_GEN_PROGS_EXTENDED): $(OUTPUT)/test_stub.o $(BPFOBJ)
>
> $(OUTPUT)/test_dev_cgroup: cgroup_helpers.c
> diff --git a/tools/testing/selftests/bpf/test_bpftool.sh b/tools/testing/selftests/bpf/test_bpftool.sh
> index 6b7ba19be1d0..50cf9d3645d2 100755
> --- a/tools/testing/selftests/bpf/test_bpftool.sh
> +++ b/tools/testing/selftests/bpf/test_bpftool.sh
> @@ -2,9 +2,10 @@
> # SPDX-License-Identifier: GPL-2.0
> # Copyright (c) 2020 SUSE LLC.
>
> +# 'make -C tools/testing/selftests/bpf install' will install to SCRIPT_PATH
nit: Should be SCRIPT_DIR. ^^^^^
> SCRIPT_DIR=$(dirname $(realpath $0))
>
> # 'make -C tools/testing/selftests/bpf' will install to BPFTOOL_INSTALL_PATH
> BPFTOOL_INSTALL_PATH="$SCRIPT_DIR"/tools/sbin
> -export PATH=$BPFTOOL_INSTALL_PATH:$PATH
> +export PATH=$SCRIPT_DIR:$BPFTOOL_INSTALL_PATH:$PATH
> python3 -m unittest -v test_bpftool.TestBpftool
> --
> 2.32.0
>
>
>
On 20/08/2021 06:16, Song Liu wrote:
> On Thu, Aug 19, 2021 at 12:28 AM Li Zhijian <[email protected]> wrote:
>> - 'make install' will install bpftool to INSTALL_PATH/bpf/bpftool
>> - add INSTALL_PATH/bpf to PATH
>>
>> Signed-off-by: Li Zhijian <[email protected]>
> Acked-by: Song Liu <[email protected]>
>
> With one nit below:
thanks for your review, i just submit a V2 to fix it and
Change-log:
V2:
- folded previous similar standalone patch to [1/5], and add acked tag from Song Liu
- add acked tag to [2/5], [3/5] from Song Liu
- [4/5]: move test_bpftool.py to TEST_PROGS_EXTENDED, files in TEST_GEN_PROGS_EXTENDED
are generated by make. Otherwise, it will break out-of-tree install:
'make O=/kselftest-build SKIP_TARGETS= V=1 -C tools/testing/selftests install INSTALL_PATH=/kselftest-install'
- [5/5]: new patch
Please take a look.
Thanks
Zhijian
>
>> ---
>> tools/testing/selftests/bpf/Makefile | 4 +++-
>> tools/testing/selftests/bpf/test_bpftool.sh | 3 ++-
>> 2 files changed, 5 insertions(+), 2 deletions(-)
>>
>> diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile
>> index f405b20c1e6c..c6ca1b8e33d5 100644
>> --- a/tools/testing/selftests/bpf/Makefile
>> +++ b/tools/testing/selftests/bpf/Makefile
>> @@ -85,7 +85,7 @@ TEST_PROGS_EXTENDED := with_addr.sh \
>> TEST_GEN_PROGS_EXTENDED = test_sock_addr test_skb_cgroup_id_user \
>> flow_dissector_load test_flow_dissector test_tcp_check_syncookie_user \
>> test_lirc_mode2_user xdping test_cpp runqslower bench bpf_testmod.ko \
>> - xdpxceiver xdp_redirect_multi
>> + xdpxceiver xdp_redirect_multi test_bpftool.py
>>
>> TEST_CUSTOM_PROGS = $(OUTPUT)/urandom_read
>>
>> @@ -187,6 +187,8 @@ $(OUTPUT)/runqslower: $(BPFOBJ) | $(DEFAULT_BPFTOOL)
>> BPFOBJ=$(BPFOBJ) BPF_INCLUDE=$(INCLUDE_DIR) && \
>> cp $(SCRATCH_DIR)/runqslower $@
>>
>> +TEST_GEN_PROGS_EXTENDED += $(DEFAULT_BPFTOOL)
>> +
>> $(TEST_GEN_PROGS) $(TEST_GEN_PROGS_EXTENDED): $(OUTPUT)/test_stub.o $(BPFOBJ)
>>
>> $(OUTPUT)/test_dev_cgroup: cgroup_helpers.c
>> diff --git a/tools/testing/selftests/bpf/test_bpftool.sh b/tools/testing/selftests/bpf/test_bpftool.sh
>> index 6b7ba19be1d0..50cf9d3645d2 100755
>> --- a/tools/testing/selftests/bpf/test_bpftool.sh
>> +++ b/tools/testing/selftests/bpf/test_bpftool.sh
>> @@ -2,9 +2,10 @@
>> # SPDX-License-Identifier: GPL-2.0
>> # Copyright (c) 2020 SUSE LLC.
>>
>> +# 'make -C tools/testing/selftests/bpf install' will install to SCRIPT_PATH
> nit: Should be SCRIPT_DIR. ^^^^^
>
>> SCRIPT_DIR=$(dirname $(realpath $0))
>>
>> # 'make -C tools/testing/selftests/bpf' will install to BPFTOOL_INSTALL_PATH
>> BPFTOOL_INSTALL_PATH="$SCRIPT_DIR"/tools/sbin
>> -export PATH=$BPFTOOL_INSTALL_PATH:$PATH
>> +export PATH=$SCRIPT_DIR:$BPFTOOL_INSTALL_PATH:$PATH
>> python3 -m unittest -v test_bpftool.TestBpftool
>> --
>> 2.32.0
>>
>>
>>
>