The current implementation timestamps all packets and also processes
the BD timestamp for the same. While it is true that HWTSTAMP_TX_ON
enables timestamps for outgoing packets, the sender of the packet
i.e. linuxptp enables timestamp for PTP or PTP event packets. Cadence
GEM IP has a provision to enable this in HW only for PTP packets.
Enable this option in DMA BD settings register to decrease overhead.
Signed-off-by: Harini Katakam <[email protected]>
Acked-by: Radhey Shyam Pandey <[email protected]>
Signed-off-by: Michal Simek <[email protected]>
---
drivers/net/ethernet/cadence/macb_ptp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/cadence/macb_ptp.c b/drivers/net/ethernet/cadence/macb_ptp.c
index c2e1f163bb14..e4f26d972219 100644
--- a/drivers/net/ethernet/cadence/macb_ptp.c
+++ b/drivers/net/ethernet/cadence/macb_ptp.c
@@ -471,7 +471,7 @@ int gem_set_hwtst(struct net_device *dev, struct ifreq *ifr, int cmd)
return -ERANGE;
fallthrough;
case HWTSTAMP_TX_ON:
- tx_bd_control = TSTAMP_ALL_FRAMES;
+ tx_bd_control = TSTAMP_ALL_PTP_FRAMES;
break;
default:
return -ERANGE;
--
2.17.1
On Tue, Aug 24, 2021 at 03:42:38PM +0530, Harini Katakam wrote:
> The current implementation timestamps all packets and also processes
> the BD timestamp for the same. While it is true that HWTSTAMP_TX_ON
> enables timestamps for outgoing packets, the sender of the packet
> i.e. linuxptp enables timestamp for PTP or PTP event packets. Cadence
> GEM IP has a provision to enable this in HW only for PTP packets.
> Enable this option in DMA BD settings register to decrease overhead.
NAK, because the HWTSTAMP_TX_ON means to time stamp any frame marked
by user space, not just PTP frames.
This patch does not "decrease overhead" because the code tests whether
time stamping was request per packet:
drivers/net/ethernet/cadence/macb_main.c line 1202
if (unlikely(skb_shinfo(skb)->tx_flags &
SKBTX_HW_TSTAMP) &&
gem_ptp_do_txstamp(queue, skb, desc) == 0) {
...
}
Thanks,
Richard
Hi Richard,
On Tue, Aug 24, 2021 at 7:35 PM Richard Cochran
<[email protected]> wrote:
>
> On Tue, Aug 24, 2021 at 03:42:38PM +0530, Harini Katakam wrote:
> > The current implementation timestamps all packets and also processes
> > the BD timestamp for the same. While it is true that HWTSTAMP_TX_ON
> > enables timestamps for outgoing packets, the sender of the packet
> > i.e. linuxptp enables timestamp for PTP or PTP event packets. Cadence
> > GEM IP has a provision to enable this in HW only for PTP packets.
> > Enable this option in DMA BD settings register to decrease overhead.
>
> NAK, because the HWTSTAMP_TX_ON means to time stamp any frame marked
> by user space, not just PTP frames.
>
> This patch does not "decrease overhead" because the code tests whether
> time stamping was request per packet:
>
Thanks for the review.
Yes, there is no SW overhead because the skb check ensures timestamp
post processing is done only on requested packets. But the IP
timestamps all packets
because this is a register level setting, not per packet. That's the
overhead I was referring to.
But based on your explanation, it looks like we have no option but to enable
TSTAMP_ALL_FRAMES. Thanks.
Regards,
Harini
On Tue, Aug 24, 2021 at 08:59:20PM +0530, Harini Katakam wrote:
> Yes, there is no SW overhead because the skb check ensures timestamp
> post processing is done only on requested packets. But the IP
> timestamps all packets
> because this is a register level setting, not per packet. That's the
> overhead I was referring to.
But the IP block time stamps the frames in silicon, no?
I don't see how that is "overhead" in any sense of the word.
Thanks,
Richard