From: Shuo Liu <[email protected]>
The ACRN hypervisor can emulate a virtual device within hypervisor for a
Guest VM. The emulated virtual device can work without the ACRN
userspace after creation. The hypervisor do the emulation of that device.
To support the virtual device creating/destroying, HSM provides the
following ioctls:
- ACRN_IOCTL_CREATE_VDEV
Pass data struct acrn_vdev from userspace to the hypervisor, and inform
the hypervisor to create a virtual device for a User VM.
- ACRN_IOCTL_DESTROY_VDEV
Pass data struct acrn_vdev from userspace to the hypervisor, and inform
the hypervisor to destroy a virtual device of a User VM.
Signed-off-by: Shuo Liu <[email protected]>
Signed-off-by: Fei Li <[email protected]>
---
drivers/virt/acrn/hsm.c | 24 ++++++++++++++++++++
drivers/virt/acrn/hypercall.h | 26 ++++++++++++++++++++++
include/uapi/linux/acrn.h | 42 +++++++++++++++++++++++++++++++++++
3 files changed, 92 insertions(+)
diff --git a/drivers/virt/acrn/hsm.c b/drivers/virt/acrn/hsm.c
index f567ca59d7c2..5419794fccf1 100644
--- a/drivers/virt/acrn/hsm.c
+++ b/drivers/virt/acrn/hsm.c
@@ -118,6 +118,7 @@ static long acrn_dev_ioctl(struct file *filp, unsigned int cmd,
struct acrn_msi_entry *msi;
struct acrn_pcidev *pcidev;
struct acrn_irqfd irqfd;
+ struct acrn_vdev *vdev;
struct page *page;
u64 cstate_cmd;
int i, ret = 0;
@@ -266,6 +267,29 @@ static long acrn_dev_ioctl(struct file *filp, unsigned int cmd,
"Failed to deassign pci device!\n");
kfree(pcidev);
break;
+ case ACRN_IOCTL_CREATE_VDEV:
+ vdev = memdup_user((void __user *)ioctl_param,
+ sizeof(struct acrn_vdev));
+ if (IS_ERR(vdev))
+ return PTR_ERR(vdev);
+
+ ret = hcall_create_vdev(vm->vmid, virt_to_phys(vdev));
+ if (ret < 0)
+ dev_dbg(acrn_dev.this_device,
+ "Failed to create virtual device!\n");
+ kfree(vdev);
+ break;
+ case ACRN_IOCTL_DESTROY_VDEV:
+ vdev = memdup_user((void __user *)ioctl_param,
+ sizeof(struct acrn_vdev));
+ if (IS_ERR(vdev))
+ return PTR_ERR(vdev);
+ ret = hcall_destroy_vdev(vm->vmid, virt_to_phys(vdev));
+ if (ret < 0)
+ dev_dbg(acrn_dev.this_device,
+ "Failed to destroy virtual device!\n");
+ kfree(vdev);
+ break;
case ACRN_IOCTL_SET_PTDEV_INTR:
irq_info = memdup_user((void __user *)ioctl_param,
sizeof(struct acrn_ptdev_irq));
diff --git a/drivers/virt/acrn/hypercall.h b/drivers/virt/acrn/hypercall.h
index f0c78e52cebb..71d300821a18 100644
--- a/drivers/virt/acrn/hypercall.h
+++ b/drivers/virt/acrn/hypercall.h
@@ -43,6 +43,8 @@
#define HC_DEASSIGN_PCIDEV _HC_ID(HC_ID, HC_ID_PCI_BASE + 0x06)
#define HC_ASSIGN_MMIODEV _HC_ID(HC_ID, HC_ID_PCI_BASE + 0x07)
#define HC_DEASSIGN_MMIODEV _HC_ID(HC_ID, HC_ID_PCI_BASE + 0x08)
+#define HC_CREATE_VDEV _HC_ID(HC_ID, HC_ID_PCI_BASE + 0x09)
+#define HC_DESTROY_VDEV _HC_ID(HC_ID, HC_ID_PCI_BASE + 0x0A)
#define HC_ID_PM_BASE 0x80UL
#define HC_PM_GET_CPU_STATE _HC_ID(HC_ID, HC_ID_PM_BASE + 0x00)
@@ -196,6 +198,30 @@ static inline long hcall_set_memory_regions(u64 regions_pa)
return acrn_hypercall1(HC_VM_SET_MEMORY_REGIONS, regions_pa);
}
+/**
+ * hcall_create_vdev() - Create a virtual device for a User VM
+ * @vmid: User VM ID
+ * @addr: Service VM GPA of the &struct acrn_vdev
+ *
+ * Return: 0 on success, <0 on failure
+ */
+static inline long hcall_create_vdev(u64 vmid, u64 addr)
+{
+ return acrn_hypercall2(HC_CREATE_VDEV, vmid, addr);
+}
+
+/**
+ * hcall_destroy_vdev() - Destroy a virtual device of a User VM
+ * @vmid: User VM ID
+ * @addr: Service VM GPA of the &struct acrn_vdev
+ *
+ * Return: 0 on success, <0 on failure
+ */
+static inline long hcall_destroy_vdev(u64 vmid, u64 addr)
+{
+ return acrn_hypercall2(HC_DESTROY_VDEV, vmid, addr);
+}
+
/**
* hcall_assign_mmiodev() - Assign a MMIO device to a User VM
* @vmid: User VM ID
diff --git a/include/uapi/linux/acrn.h b/include/uapi/linux/acrn.h
index 470036d6b1ac..1408d1063339 100644
--- a/include/uapi/linux/acrn.h
+++ b/include/uapi/linux/acrn.h
@@ -441,6 +441,44 @@ struct acrn_mmiodev {
} res[ACRN_MMIODEV_RES_NUM];
};
+/**
+ * struct acrn_vdev - Info for creating or destroying a virtual device
+ * @id: Union of identifier of the virtual device
+ * @id.value: Raw data of the identifier
+ * @id.fields.vendor: Vendor id of the virtual PCI device
+ * @id.fields.device: Device id of the virtual PCI device
+ * @id.fields.legacy_id: ID of the virtual device if not a PCI device
+ * @slot: Virtual Bus/Device/Function of the virtual
+ * device
+ * @io_base: IO resource base address of the virtual device
+ * @io_size: IO resource size of the virtual device
+ * @args: Arguments for the virtual device creation
+ *
+ * The created virtual device can be a PCI device or a legacy device (e.g.
+ * a virtual UART controller) and it is emulated by the hypervisor. This
+ * structure will be passed to hypervisor directly.
+ */
+struct acrn_vdev {
+ /*
+ * the identifier of the device, the low 32 bits represent the vendor
+ * id and device id of PCI device and the high 32 bits represent the
+ * device number of the legacy device
+ */
+ union {
+ __u64 value;
+ struct {
+ __u16 vendor;
+ __u16 device;
+ __u32 legacy_id;
+ } fields;
+ } id;
+
+ __u64 slot;
+ __u32 io_addr[ACRN_PCI_NUM_BARS];
+ __u32 io_size[ACRN_PCI_NUM_BARS];
+ __u8 args[128];
+};
+
/**
* struct acrn_msi_entry - Info for injecting a MSI interrupt to a VM
* @msi_addr: MSI addr[19:12] with dest vCPU ID
@@ -596,6 +634,10 @@ struct acrn_irqfd {
_IOW(ACRN_IOCTL_TYPE, 0x57, struct acrn_mmiodev)
#define ACRN_IOCTL_DEASSIGN_MMIODEV \
_IOW(ACRN_IOCTL_TYPE, 0x58, struct acrn_mmiodev)
+#define ACRN_IOCTL_CREATE_VDEV \
+ _IOW(ACRN_IOCTL_TYPE, 0x59, struct acrn_vdev)
+#define ACRN_IOCTL_DESTROY_VDEV \
+ _IOW(ACRN_IOCTL_TYPE, 0x5A, struct acrn_vdev)
#define ACRN_IOCTL_PM_GET_CPU_STATE \
_IOWR(ACRN_IOCTL_TYPE, 0x60, __u64)
--
2.25.1
On Wed, Aug 25, 2021 at 05:01:41PM +0800, Fei Li wrote:
> From: Shuo Liu <[email protected]>
>
> The ACRN hypervisor can emulate a virtual device within hypervisor for a
> Guest VM. The emulated virtual device can work without the ACRN
> userspace after creation. The hypervisor do the emulation of that device.
>
> To support the virtual device creating/destroying, HSM provides the
> following ioctls:
> - ACRN_IOCTL_CREATE_VDEV
> Pass data struct acrn_vdev from userspace to the hypervisor, and inform
> the hypervisor to create a virtual device for a User VM.
> - ACRN_IOCTL_DESTROY_VDEV
> Pass data struct acrn_vdev from userspace to the hypervisor, and inform
> the hypervisor to destroy a virtual device of a User VM.
>
> Signed-off-by: Shuo Liu <[email protected]>
> Signed-off-by: Fei Li <[email protected]>
> ---
> drivers/virt/acrn/hsm.c | 24 ++++++++++++++++++++
> drivers/virt/acrn/hypercall.h | 26 ++++++++++++++++++++++
> include/uapi/linux/acrn.h | 42 +++++++++++++++++++++++++++++++++++
> 3 files changed, 92 insertions(+)
>
> diff --git a/drivers/virt/acrn/hsm.c b/drivers/virt/acrn/hsm.c
> index f567ca59d7c2..5419794fccf1 100644
> --- a/drivers/virt/acrn/hsm.c
> +++ b/drivers/virt/acrn/hsm.c
> @@ -118,6 +118,7 @@ static long acrn_dev_ioctl(struct file *filp, unsigned int cmd,
> struct acrn_msi_entry *msi;
> struct acrn_pcidev *pcidev;
> struct acrn_irqfd irqfd;
> + struct acrn_vdev *vdev;
> struct page *page;
> u64 cstate_cmd;
> int i, ret = 0;
> @@ -266,6 +267,29 @@ static long acrn_dev_ioctl(struct file *filp, unsigned int cmd,
> "Failed to deassign pci device!\n");
> kfree(pcidev);
> break;
> + case ACRN_IOCTL_CREATE_VDEV:
> + vdev = memdup_user((void __user *)ioctl_param,
> + sizeof(struct acrn_vdev));
> + if (IS_ERR(vdev))
> + return PTR_ERR(vdev);
> +
> + ret = hcall_create_vdev(vm->vmid, virt_to_phys(vdev));
No validation of the structure fields?
> + if (ret < 0)
> + dev_dbg(acrn_dev.this_device,
> + "Failed to create virtual device!\n");
> + kfree(vdev);
> + break;
> + case ACRN_IOCTL_DESTROY_VDEV:
> + vdev = memdup_user((void __user *)ioctl_param,
> + sizeof(struct acrn_vdev));
> + if (IS_ERR(vdev))
> + return PTR_ERR(vdev);
> + ret = hcall_destroy_vdev(vm->vmid, virt_to_phys(vdev));
Again, no validation?
> + if (ret < 0)
> + dev_dbg(acrn_dev.this_device,
> + "Failed to destroy virtual device!\n");
> + kfree(vdev);
> + break;
> case ACRN_IOCTL_SET_PTDEV_INTR:
> irq_info = memdup_user((void __user *)ioctl_param,
> sizeof(struct acrn_ptdev_irq));
> diff --git a/drivers/virt/acrn/hypercall.h b/drivers/virt/acrn/hypercall.h
> index f0c78e52cebb..71d300821a18 100644
> --- a/drivers/virt/acrn/hypercall.h
> +++ b/drivers/virt/acrn/hypercall.h
> @@ -43,6 +43,8 @@
> #define HC_DEASSIGN_PCIDEV _HC_ID(HC_ID, HC_ID_PCI_BASE + 0x06)
> #define HC_ASSIGN_MMIODEV _HC_ID(HC_ID, HC_ID_PCI_BASE + 0x07)
> #define HC_DEASSIGN_MMIODEV _HC_ID(HC_ID, HC_ID_PCI_BASE + 0x08)
> +#define HC_CREATE_VDEV _HC_ID(HC_ID, HC_ID_PCI_BASE + 0x09)
> +#define HC_DESTROY_VDEV _HC_ID(HC_ID, HC_ID_PCI_BASE + 0x0A)
>
> #define HC_ID_PM_BASE 0x80UL
> #define HC_PM_GET_CPU_STATE _HC_ID(HC_ID, HC_ID_PM_BASE + 0x00)
> @@ -196,6 +198,30 @@ static inline long hcall_set_memory_regions(u64 regions_pa)
> return acrn_hypercall1(HC_VM_SET_MEMORY_REGIONS, regions_pa);
> }
>
> +/**
> + * hcall_create_vdev() - Create a virtual device for a User VM
> + * @vmid: User VM ID
> + * @addr: Service VM GPA of the &struct acrn_vdev
> + *
> + * Return: 0 on success, <0 on failure
> + */
> +static inline long hcall_create_vdev(u64 vmid, u64 addr)
> +{
> + return acrn_hypercall2(HC_CREATE_VDEV, vmid, addr);
> +}
> +
> +/**
> + * hcall_destroy_vdev() - Destroy a virtual device of a User VM
> + * @vmid: User VM ID
> + * @addr: Service VM GPA of the &struct acrn_vdev
> + *
> + * Return: 0 on success, <0 on failure
> + */
> +static inline long hcall_destroy_vdev(u64 vmid, u64 addr)
> +{
> + return acrn_hypercall2(HC_DESTROY_VDEV, vmid, addr);
> +}
> +
> /**
> * hcall_assign_mmiodev() - Assign a MMIO device to a User VM
> * @vmid: User VM ID
> diff --git a/include/uapi/linux/acrn.h b/include/uapi/linux/acrn.h
> index 470036d6b1ac..1408d1063339 100644
> --- a/include/uapi/linux/acrn.h
> +++ b/include/uapi/linux/acrn.h
> @@ -441,6 +441,44 @@ struct acrn_mmiodev {
> } res[ACRN_MMIODEV_RES_NUM];
> };
>
> +/**
> + * struct acrn_vdev - Info for creating or destroying a virtual device
> + * @id: Union of identifier of the virtual device
> + * @id.value: Raw data of the identifier
> + * @id.fields.vendor: Vendor id of the virtual PCI device
> + * @id.fields.device: Device id of the virtual PCI device
> + * @id.fields.legacy_id: ID of the virtual device if not a PCI device
> + * @slot: Virtual Bus/Device/Function of the virtual
> + * device
> + * @io_base: IO resource base address of the virtual device
> + * @io_size: IO resource size of the virtual device
> + * @args: Arguments for the virtual device creation
> + *
> + * The created virtual device can be a PCI device or a legacy device (e.g.
> + * a virtual UART controller) and it is emulated by the hypervisor. This
> + * structure will be passed to hypervisor directly.
> + */
> +struct acrn_vdev {
> + /*
> + * the identifier of the device, the low 32 bits represent the vendor
> + * id and device id of PCI device and the high 32 bits represent the
> + * device number of the legacy device
> + */
> + union {
> + __u64 value;
> + struct {
> + __u16 vendor;
> + __u16 device;
Endian of these values?
> + __u32 legacy_id;
What is "legacy"? What types of devices?
> + } fields;
> + } id;
> +
> + __u64 slot;
> + __u32 io_addr[ACRN_PCI_NUM_BARS];
> + __u32 io_size[ACRN_PCI_NUM_BARS];
> + __u8 args[128];
What are these args for exactly?
> +};
> +
> /**
> * struct acrn_msi_entry - Info for injecting a MSI interrupt to a VM
> * @msi_addr: MSI addr[19:12] with dest vCPU ID
> @@ -596,6 +634,10 @@ struct acrn_irqfd {
> _IOW(ACRN_IOCTL_TYPE, 0x57, struct acrn_mmiodev)
> #define ACRN_IOCTL_DEASSIGN_MMIODEV \
> _IOW(ACRN_IOCTL_TYPE, 0x58, struct acrn_mmiodev)
> +#define ACRN_IOCTL_CREATE_VDEV \
> + _IOW(ACRN_IOCTL_TYPE, 0x59, struct acrn_vdev)
> +#define ACRN_IOCTL_DESTROY_VDEV \
> + _IOW(ACRN_IOCTL_TYPE, 0x5A, struct acrn_vdev)
Why do you need the full structure to destroy the device?
thanks,
greg k-h
On Fri, Aug 27, 2021 at 10:47:41AM +0200, Greg KH wrote:
> On Wed, Aug 25, 2021 at 05:01:41PM +0800, Fei Li wrote:
> > From: Shuo Liu <[email protected]>
> >
> > The ACRN hypervisor can emulate a virtual device within hypervisor for a
> > Guest VM. The emulated virtual device can work without the ACRN
> > userspace after creation. The hypervisor do the emulation of that device.
> >
> > To support the virtual device creating/destroying, HSM provides the
> > following ioctls:
> > - ACRN_IOCTL_CREATE_VDEV
> > Pass data struct acrn_vdev from userspace to the hypervisor, and inform
> > the hypervisor to create a virtual device for a User VM.
> > - ACRN_IOCTL_DESTROY_VDEV
> > Pass data struct acrn_vdev from userspace to the hypervisor, and inform
> > the hypervisor to destroy a virtual device of a User VM.
> >
> > Signed-off-by: Shuo Liu <[email protected]>
> > Signed-off-by: Fei Li <[email protected]>
> > ---
> > drivers/virt/acrn/hsm.c | 24 ++++++++++++++++++++
> > drivers/virt/acrn/hypercall.h | 26 ++++++++++++++++++++++
> > include/uapi/linux/acrn.h | 42 +++++++++++++++++++++++++++++++++++
> > 3 files changed, 92 insertions(+)
> >
> > diff --git a/drivers/virt/acrn/hsm.c b/drivers/virt/acrn/hsm.c
> > index f567ca59d7c2..5419794fccf1 100644
> > --- a/drivers/virt/acrn/hsm.c
> > +++ b/drivers/virt/acrn/hsm.c
> > @@ -118,6 +118,7 @@ static long acrn_dev_ioctl(struct file *filp, unsigned int cmd,
> > struct acrn_msi_entry *msi;
> > struct acrn_pcidev *pcidev;
> > struct acrn_irqfd irqfd;
> > + struct acrn_vdev *vdev;
> > struct page *page;
> > u64 cstate_cmd;
> > int i, ret = 0;
> > @@ -266,6 +267,29 @@ static long acrn_dev_ioctl(struct file *filp, unsigned int cmd,
> > "Failed to deassign pci device!\n");
> > kfree(pcidev);
> > break;
> > + case ACRN_IOCTL_CREATE_VDEV:
> > + vdev = memdup_user((void __user *)ioctl_param,
> > + sizeof(struct acrn_vdev));
> > + if (IS_ERR(vdev))
> > + return PTR_ERR(vdev);
> > +
> > + ret = hcall_create_vdev(vm->vmid, virt_to_phys(vdev));
Hi Greg
>
> No validation of the structure fields?
Service VM knows nothing about how to create these vdevs, it only needs to
pass through this structure to ACRN Hypervisor to let ACRN Hypervisor check it.
>
>
> > + if (ret < 0)
> > + dev_dbg(acrn_dev.this_device,
> > + "Failed to create virtual device!\n");
> > + kfree(vdev);
> > + break;
> > + case ACRN_IOCTL_DESTROY_VDEV:
> > + vdev = memdup_user((void __user *)ioctl_param,
> > + sizeof(struct acrn_vdev));
> > + if (IS_ERR(vdev))
> > + return PTR_ERR(vdev);
> > + ret = hcall_destroy_vdev(vm->vmid, virt_to_phys(vdev));
>
> Again, no validation?
Service VM knows nothing about how to destroy these vdevs, it only needs to
pass through this structure to ACRN Hypervisor to let ACRN Hypervisor check it.
>
> > + if (ret < 0)
> > + dev_dbg(acrn_dev.this_device,
> > + "Failed to destroy virtual device!\n");
> > + kfree(vdev);
> > + break;
> > case ACRN_IOCTL_SET_PTDEV_INTR:
> > irq_info = memdup_user((void __user *)ioctl_param,
> > sizeof(struct acrn_ptdev_irq));
> > diff --git a/drivers/virt/acrn/hypercall.h b/drivers/virt/acrn/hypercall.h
> > index f0c78e52cebb..71d300821a18 100644
> > --- a/drivers/virt/acrn/hypercall.h
> > +++ b/drivers/virt/acrn/hypercall.h
> > @@ -43,6 +43,8 @@
> > #define HC_DEASSIGN_PCIDEV _HC_ID(HC_ID, HC_ID_PCI_BASE + 0x06)
> > #define HC_ASSIGN_MMIODEV _HC_ID(HC_ID, HC_ID_PCI_BASE + 0x07)
> > #define HC_DEASSIGN_MMIODEV _HC_ID(HC_ID, HC_ID_PCI_BASE + 0x08)
> > +#define HC_CREATE_VDEV _HC_ID(HC_ID, HC_ID_PCI_BASE + 0x09)
> > +#define HC_DESTROY_VDEV _HC_ID(HC_ID, HC_ID_PCI_BASE + 0x0A)
> >
> > #define HC_ID_PM_BASE 0x80UL
> > #define HC_PM_GET_CPU_STATE _HC_ID(HC_ID, HC_ID_PM_BASE + 0x00)
> > @@ -196,6 +198,30 @@ static inline long hcall_set_memory_regions(u64 regions_pa)
> > return acrn_hypercall1(HC_VM_SET_MEMORY_REGIONS, regions_pa);
> > }
> >
> > +/**
> > + * hcall_create_vdev() - Create a virtual device for a User VM
> > + * @vmid: User VM ID
> > + * @addr: Service VM GPA of the &struct acrn_vdev
> > + *
> > + * Return: 0 on success, <0 on failure
> > + */
> > +static inline long hcall_create_vdev(u64 vmid, u64 addr)
> > +{
> > + return acrn_hypercall2(HC_CREATE_VDEV, vmid, addr);
> > +}
> > +
> > +/**
> > + * hcall_destroy_vdev() - Destroy a virtual device of a User VM
> > + * @vmid: User VM ID
> > + * @addr: Service VM GPA of the &struct acrn_vdev
> > + *
> > + * Return: 0 on success, <0 on failure
> > + */
> > +static inline long hcall_destroy_vdev(u64 vmid, u64 addr)
> > +{
> > + return acrn_hypercall2(HC_DESTROY_VDEV, vmid, addr);
> > +}
> > +
> > /**
> > * hcall_assign_mmiodev() - Assign a MMIO device to a User VM
> > * @vmid: User VM ID
> > diff --git a/include/uapi/linux/acrn.h b/include/uapi/linux/acrn.h
> > index 470036d6b1ac..1408d1063339 100644
> > --- a/include/uapi/linux/acrn.h
> > +++ b/include/uapi/linux/acrn.h
> > @@ -441,6 +441,44 @@ struct acrn_mmiodev {
> > } res[ACRN_MMIODEV_RES_NUM];
> > };
> >
> > +/**
> > + * struct acrn_vdev - Info for creating or destroying a virtual device
> > + * @id: Union of identifier of the virtual device
> > + * @id.value: Raw data of the identifier
> > + * @id.fields.vendor: Vendor id of the virtual PCI device
> > + * @id.fields.device: Device id of the virtual PCI device
> > + * @id.fields.legacy_id: ID of the virtual device if not a PCI device
> > + * @slot: Virtual Bus/Device/Function of the virtual
> > + * device
> > + * @io_base: IO resource base address of the virtual device
> > + * @io_size: IO resource size of the virtual device
> > + * @args: Arguments for the virtual device creation
> > + *
> > + * The created virtual device can be a PCI device or a legacy device (e.g.
> > + * a virtual UART controller) and it is emulated by the hypervisor. This
> > + * structure will be passed to hypervisor directly.
> > + */
> > +struct acrn_vdev {
> > + /*
> > + * the identifier of the device, the low 32 bits represent the vendor
> > + * id and device id of PCI device and the high 32 bits represent the
> > + * device number of the legacy device
> > + */
> > + union {
> > + __u64 value;
> > + struct {
> > + __u16 vendor;
> > + __u16 device;
>
> Endian of these values?
little-endian or big-endian ?
>
> > + __u32 legacy_id;
>
> What is "legacy"? What types of devices?
A PCI device which under a PCI bridge.
>
>
> > + } fields;
> > + } id;
> > +
> > + __u64 slot;
> > + __u32 io_addr[ACRN_PCI_NUM_BARS];
> > + __u32 io_size[ACRN_PCI_NUM_BARS];
> > + __u8 args[128];
>
> What are these args for exactly?
For different kinds of vdevs, it represents differently.
For current usages, it may be:
a) a vdev's name of a virtual PCI device which used to communicate between VMs
b) an index of virtual Uart
c) a structure to represent a virtual Root Port.
>
> > +};
> > +
> > /**
> > * struct acrn_msi_entry - Info for injecting a MSI interrupt to a VM
> > * @msi_addr: MSI addr[19:12] with dest vCPU ID
> > @@ -596,6 +634,10 @@ struct acrn_irqfd {
> > _IOW(ACRN_IOCTL_TYPE, 0x57, struct acrn_mmiodev)
> > #define ACRN_IOCTL_DEASSIGN_MMIODEV \
> > _IOW(ACRN_IOCTL_TYPE, 0x58, struct acrn_mmiodev)
> > +#define ACRN_IOCTL_CREATE_VDEV \
> > + _IOW(ACRN_IOCTL_TYPE, 0x59, struct acrn_vdev)
> > +#define ACRN_IOCTL_DESTROY_VDEV \
> > + _IOW(ACRN_IOCTL_TYPE, 0x5A, struct acrn_vdev)
>
> Why do you need the full structure to destroy the device?
We need the id field + other fields (optional, the slot or the args) to identify a vdev.
thanks.
>
> thanks,
>
> greg k-h