Move it inside the /soc subnode because it is part of the CCSR space.
Signed-off-by: Michael Walle <[email protected]>
---
arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index 343ecf0e8973..9a65a7118faa 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -80,13 +80,6 @@ osc_27m: clock-osc-27m {
clock-output-names = "phy_27m";
};
- dpclk: clock-controller@f1f0000 {
- compatible = "fsl,ls1028a-plldig";
- reg = <0x0 0xf1f0000 0x0 0xffff>;
- #clock-cells = <0>;
- clocks = <&osc_27m>;
- };
-
firmware {
optee: optee {
compatible = "linaro,optee-tz";
@@ -926,6 +919,13 @@ QORIQ_CLK_PLL_DIV(2)>,
status = "disabled";
};
+ dpclk: clock-controller@f1f0000 {
+ compatible = "fsl,ls1028a-plldig";
+ reg = <0x0 0xf1f0000 0x0 0x10000>;
+ #clock-cells = <0>;
+ clocks = <&osc_27m>;
+ };
+
tmu: tmu@1f80000 {
compatible = "fsl,qoriq-tmu";
reg = <0x0 0x1f80000 0x0 0x10000>;
--
2.30.2