Define the compatible string and properties needed by imx_dsp_rproc
driver.
Signed-off-by: Shengjiu Wang <[email protected]>
---
changes in v2:
- add items for clock-names
- change syscon to fsl,dsp-ctrl
.../remoteproc/fsl,imx-dsp-rproc.yaml | 150 ++++++++++++++++++
1 file changed, 150 insertions(+)
create mode 100644 Documentation/devicetree/bindings/remoteproc/fsl,imx-dsp-rproc.yaml
diff --git a/Documentation/devicetree/bindings/remoteproc/fsl,imx-dsp-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/fsl,imx-dsp-rproc.yaml
new file mode 100644
index 000000000000..edf6e4b8d7bb
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/fsl,imx-dsp-rproc.yaml
@@ -0,0 +1,150 @@
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/fsl,imx-dsp-rproc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX DSP Remoteproc Devices
+
+maintainers:
+ - Shengjiu Wang <[email protected]>
+
+description:
+ This binding provides support for DSP processors found on i.mX family of SoCs
+
+properties:
+ compatible:
+ enum:
+ - fsl,imx8qxp-hifi4
+ - fsl,imx8qm-hifi4
+ - fsl,imx8mp-hifi4
+ - fsl,imx8ulp-hifi4
+
+ clocks:
+ description:
+ Main functional clock for the remote processor
+ minItems: 1
+ maxItems: 32
+
+ clock-names:
+ description: |
+ List of clock names for the remote processor.
+ dsp_clkx for clocks of dsp itself.
+ per_clkx for clocks of peripherals used by dsp.
+ minItems: 1
+ maxItems: 26
+ items:
+ - const: dsp_clk1
+ - const: dsp_clk2
+ - const: dsp_clk3
+ - const: dsp_clk4
+ - const: dsp_clk5
+ - const: dsp_clk6
+ - const: dsp_clk7
+ - const: dsp_clk8
+ - const: per_clk1
+ - const: per_clk2
+ - const: per_clk3
+ - const: per_clk4
+ - const: per_clk5
+ - const: per_clk6
+ - const: per_clk7
+ - const: per_clk8
+ - const: per_clk9
+ - const: per_clk10
+ - const: per_clk11
+ - const: per_clk12
+ - const: per_clk13
+ - const: per_clk14
+ - const: per_clk15
+ - const: per_clk16
+ - const: per_clk17
+ - const: per_clk18
+
+ fsl,dsp-ctrl:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ Phandle to syscon block which provide access for processor enablement
+
+ mbox-names:
+ items:
+ - const: tx
+ - const: rx
+ - const: rxdb
+
+ mboxes:
+ description:
+ This property is required only if the rpmsg/virtio functionality is used.
+ List of <&phandle type channel> - 1 channel for TX, 1 channel for RX, 1 channel for RXDB.
+ (see mailbox/fsl,mu.yaml)
+ minItems: 1
+ maxItems: 3
+
+ firmware-name:
+ description: |
+ Default name of the firmware to load to the remote processor.
+
+ memory-region:
+ description:
+ If present, a phandle for a reserved memory area that used for vdev buffer,
+ resource table, vring region and others used by remote processor.
+ minItems: 1
+ maxItems: 32
+
+ reg:
+ description: |
+ Address space for any remoteproc memories present on the SoC.
+
+ power-domains:
+ minItems: 1
+ maxItems: 32
+
+required:
+ - compatible
+ - reg
+ - mboxes
+ - mbox-names
+ - clocks
+ - clock-names
+ - firmware-name
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/imx8mp-clock.h>
+ dsp_reserved: dsp@92400000 {
+ reg = <0x92400000 0x1000000>;
+ no-map;
+ };
+ dsp_vdev0vring0: vdev0vring0@942f0000 {
+ reg = <0x942f0000 0x8000>;
+ no-map;
+ };
+ dsp_vdev0vring1: vdev0vring1@942f8000 {
+ reg = <0x942f8000 0x8000>;
+ no-map;
+ };
+ dsp_vdev0buffer: vdev0buffer@94300000 {
+ compatible = "shared-dma-pool";
+ reg = <0x94300000 0x100000>;
+ no-map;
+ };
+
+ dsp: dsp@3b6e8000 {
+ compatible = "fsl,imx8mp-hifi4";
+ reg = <0x3B6E8000 0x88000>;
+ clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_OCRAMA_IPG>,
+ <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_DSP_ROOT>,
+ <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_DSPDBG_ROOT>;
+ clock-names = "dsp_clk1", "dsp_clk2", "dsp_clk3";
+ firmware-name = "imx/dsp/hifi4.bin";
+ power-domains = <&audiomix_pd>;
+ mbox-names = "tx", "rx", "rxdb";
+ mboxes = <&mu2 0 0>,
+ <&mu2 1 0>,
+ <&mu2 3 0>;
+ memory-region = <&dsp_vdev0buffer>, <&dsp_vdev0vring0>,
+ <&dsp_vdev0vring1>, <&dsp_reserved>;
+ fsl,dsp-ctrl = <&audio_blk_ctrl>;
+ };
--
2.17.1
Provide a basic driver to control DSP processor found on NXP i.MX8QM,
i.MX8QXP, i.MX8MP and i.MX8ULP.
Currently it is able to resolve addresses between DSP and main CPU,
start and stop the processor, suspend and resume.
The communication between DSP and main CPU is based on mailbox, there
are three mailbox channels (tx, rx, rxdb).
This driver was tested on NXP i.MX8QM, i.MX8QXP, i.MX8MP and i.MX8ULP.
Signed-off-by: Shengjiu Wang <[email protected]>
---
changes in v2:
- change syscon to fsl,dsp-ctrl
drivers/remoteproc/Kconfig | 11 +
drivers/remoteproc/Makefile | 1 +
drivers/remoteproc/imx_dsp_rproc.c | 1078 ++++++++++++++++++++++++++++
3 files changed, 1090 insertions(+)
create mode 100644 drivers/remoteproc/imx_dsp_rproc.c
diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig
index 9a6eedc3994a..890a14e6f3f9 100644
--- a/drivers/remoteproc/Kconfig
+++ b/drivers/remoteproc/Kconfig
@@ -34,6 +34,17 @@ config IMX_REMOTEPROC
It's safe to say N here.
+config IMX_DSP_REMOTEPROC
+ tristate "i.MX DSP remoteproc support"
+ depends on ARCH_MXC
+ depends on HAVE_ARM_SMCCC
+ select MAILBOX
+ help
+ Say y here to support iMX's DSP remote processors via the remote
+ processor framework.
+
+ It's safe to say N here.
+
config INGENIC_VPU_RPROC
tristate "Ingenic JZ47xx VPU remoteproc support"
depends on MIPS || COMPILE_TEST
diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile
index bb26c9e4ef9c..37d5cb1c04bf 100644
--- a/drivers/remoteproc/Makefile
+++ b/drivers/remoteproc/Makefile
@@ -12,6 +12,7 @@ remoteproc-y += remoteproc_virtio.o
remoteproc-y += remoteproc_elf_loader.o
obj-$(CONFIG_REMOTEPROC_CDEV) += remoteproc_cdev.o
obj-$(CONFIG_IMX_REMOTEPROC) += imx_rproc.o
+obj-$(CONFIG_IMX_DSP_REMOTEPROC) += imx_dsp_rproc.o
obj-$(CONFIG_INGENIC_VPU_RPROC) += ingenic_rproc.o
obj-$(CONFIG_MTK_SCP) += mtk_scp.o mtk_scp_ipi.o
obj-$(CONFIG_OMAP_REMOTEPROC) += omap_remoteproc.o
diff --git a/drivers/remoteproc/imx_dsp_rproc.c b/drivers/remoteproc/imx_dsp_rproc.c
new file mode 100644
index 000000000000..ce0596694122
--- /dev/null
+++ b/drivers/remoteproc/imx_dsp_rproc.c
@@ -0,0 +1,1078 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright 2021 NXP
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mailbox_client.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_reserved_mem.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pm_domain.h>
+#include <linux/regmap.h>
+#include <linux/remoteproc.h>
+#include <linux/slab.h>
+#include <linux/pm_runtime.h>
+#include <linux/workqueue.h>
+#include <linux/firmware/imx/sci.h>
+#include <dt-bindings/firmware/imx/rsrc.h>
+#include <linux/arm-smccc.h>
+
+#include "remoteproc_internal.h"
+#include "remoteproc_elf_helpers.h"
+
+enum imx_dsp_rp_mbox_messages {
+ RP_MBOX_SUSPEND_SYSTEM = 0xFF11,
+ RP_MBOX_SUSPEND_ACK = 0xFF12,
+ RP_MBOX_RESUME_SYSTEM = 0xFF13,
+ RP_MBOX_RESUME_ACK = 0xFF14,
+};
+
+#define DSP_RPROC_CLK_MAX 32
+
+#define REMOTE_IS_READY BIT(0)
+#define REMOTE_READY_WAIT_MAX_RETRIES 500
+
+/* att flags */
+/* DSP own area. Can be mapped at probe */
+#define ATT_OWN BIT(31)
+#define ATT_IRAM BIT(30)
+
+/* i.MX8MP */
+/* DAP registers */
+#define IMX8M_DAP_DEBUG 0x28800000
+#define IMX8M_DAP_DEBUG_SIZE (64 * 1024)
+#define IMX8M_DAP_PWRCTL (0x4000 + 0x3020)
+#define IMX8M_PWRCTL_CORERESET BIT(16)
+
+/* DSP audio mix registers */
+#define IMX8M_AudioDSP_REG0 0x100
+#define IMX8M_AudioDSP_REG1 0x104
+#define IMX8M_AudioDSP_REG2 0x108
+#define IMX8M_AudioDSP_REG3 0x10c
+
+#define IMX8M_AudioDSP_REG2_RUNSTALL BIT(5)
+#define IMX8M_AudioDSP_REG2_PWAITMODE BIT(1)
+
+/* i.MX8ULP */
+#define IMX8ULP_SIM_LPAV_REG_SYSCTRL0 0x8
+#define IMX8ULP_SYSCTRL0_DSP_DBG_RST BIT(25)
+#define IMX8ULP_SYSCTRL0_DSP_PLAT_CLK_EN BIT(19)
+#define IMX8ULP_SYSCTRL0_DSP_PBCLK_EN BIT(18)
+#define IMX8ULP_SYSCTRL0_DSP_CLK_EN BIT(17)
+#define IMX8ULP_SYSCTRL0_DSP_RST BIT(16)
+#define IMX8ULP_SYSCTRL0_DSP_OCD_HALT BIT(14)
+#define IMX8ULP_SYSCTRL0_DSP_STALL BIT(13)
+
+#define IMX8ULP_SIP_HIFI_XRDC 0xc200000e
+
+/* address translation table */
+struct imx_dsp_rproc_att {
+ u32 da; /* device address (From Cortex M4 view)*/
+ u32 sa; /* system bus address */
+ u32 size; /* size of reg range */
+ int flags;
+};
+
+/* Remote core start/stop method */
+enum imx_dsp_rproc_method {
+ /* Through syscon regmap */
+ IMX_DSP_MMIO,
+ IMX_DSP_SCU_API,
+};
+
+struct imx_dsp_rproc {
+ struct device *dev;
+ struct regmap *regmap;
+ struct rproc *rproc;
+ const struct imx_dsp_rproc_dcfg *dcfg;
+ struct clk *clks[DSP_RPROC_CLK_MAX];
+ struct mbox_client cl;
+ struct mbox_client cl_rxdb;
+ struct mbox_chan *tx_ch;
+ struct mbox_chan *rx_ch;
+ struct mbox_chan *rxdb_ch;
+ struct device **pd_dev;
+ struct device_link **pd_dev_link;
+ struct imx_sc_ipc *ipc_handle;
+ struct work_struct rproc_work;
+ struct workqueue_struct *workqueue;
+ struct completion pm_comp;
+ spinlock_t mbox_lock; /* lock for mbox */
+ int num_domains;
+ u32 flags;
+};
+
+struct imx_dsp_rproc_dcfg {
+ u32 src_reg;
+ u32 src_mask;
+ u32 src_start;
+ u32 src_stop;
+ const struct imx_dsp_rproc_att *att;
+ size_t att_size;
+ enum imx_dsp_rproc_method method;
+ int (*reset)(struct imx_dsp_rproc *priv);
+};
+
+static const struct imx_dsp_rproc_att imx_dsp_rproc_att_imx8qm[] = {
+ /* dev addr , sys addr , size , flags */
+ { 0x596e8000, 0x556e8000, 0x00008000, ATT_OWN },
+ { 0x596f0000, 0x556f0000, 0x00008000, ATT_OWN },
+ { 0x596f8000, 0x556f8000, 0x00000800, ATT_OWN | ATT_IRAM},
+ { 0x55700000, 0x55700000, 0x00070000, ATT_OWN },
+ /* DDR (Data) */
+ { 0x80000000, 0x80000000, 0x60000000, 0},
+};
+
+static const struct imx_dsp_rproc_att imx_dsp_rproc_att_imx8qxp[] = {
+ /* dev addr , sys addr , size , flags */
+ { 0x596e8000, 0x596e8000, 0x00008000, ATT_OWN },
+ { 0x596f0000, 0x596f0000, 0x00008000, ATT_OWN },
+ { 0x596f8000, 0x596f8000, 0x00000800, ATT_OWN | ATT_IRAM},
+ { 0x59700000, 0x59700000, 0x00070000, ATT_OWN },
+ /* DDR (Data) */
+ { 0x80000000, 0x80000000, 0x60000000, 0},
+};
+
+static const struct imx_dsp_rproc_att imx_dsp_rproc_att_imx8mp[] = {
+ /* dev addr , sys addr , size , flags */
+ { 0x3b6e8000, 0x3b6e8000, 0x00008000, ATT_OWN },
+ { 0x3b6f0000, 0x3b6f0000, 0x00008000, ATT_OWN },
+ { 0x3b6f8000, 0x3b6f8000, 0x00000800, ATT_OWN | ATT_IRAM},
+ { 0x3b700000, 0x3b700000, 0x00040000, ATT_OWN },
+ /* DDR (Data) */
+ { 0x40000000, 0x40000000, 0x80000000, 0},
+};
+
+static const struct imx_dsp_rproc_att imx_dsp_rproc_att_imx8ulp[] = {
+ /* dev addr , sys addr , size , flags */
+ { 0x21170000, 0x21170000, 0x00010000, ATT_OWN | ATT_IRAM},
+ { 0x21180000, 0x21180000, 0x00010000, ATT_OWN },
+ /* DDR (Data) */
+ { 0x0c000000, 0x80000000, 0x10000000, 0},
+ { 0x30000000, 0x90000000, 0x10000000, 0},
+};
+
+static int imx8mp_dsp_reset(struct imx_dsp_rproc *priv)
+{
+ void __iomem *dap = ioremap_wc(IMX8M_DAP_DEBUG, IMX8M_DAP_DEBUG_SIZE);
+ int pwrctl;
+
+ /* put DSP into reset and stall */
+ pwrctl = readl(dap + IMX8M_DAP_PWRCTL);
+ pwrctl |= IMX8M_PWRCTL_CORERESET;
+ writel(pwrctl, dap + IMX8M_DAP_PWRCTL);
+
+ /* keep reset asserted for 10 cycles */
+ usleep_range(1, 2);
+
+ regmap_update_bits(priv->regmap, IMX8M_AudioDSP_REG2,
+ IMX8M_AudioDSP_REG2_RUNSTALL,
+ IMX8M_AudioDSP_REG2_RUNSTALL);
+
+ /* take the DSP out of reset and keep stalled for FW loading */
+ pwrctl = readl(dap + IMX8M_DAP_PWRCTL);
+ pwrctl &= ~IMX8M_PWRCTL_CORERESET;
+ writel(pwrctl, dap + IMX8M_DAP_PWRCTL);
+
+ iounmap(dap);
+ return 0;
+}
+
+static int imx8ulp_dsp_reset(struct imx_dsp_rproc *priv)
+{
+ struct arm_smccc_res res;
+
+ regmap_update_bits(priv->regmap, IMX8ULP_SIM_LPAV_REG_SYSCTRL0,
+ IMX8ULP_SYSCTRL0_DSP_RST, IMX8ULP_SYSCTRL0_DSP_RST);
+ regmap_update_bits(priv->regmap, IMX8ULP_SIM_LPAV_REG_SYSCTRL0,
+ IMX8ULP_SYSCTRL0_DSP_STALL,
+ IMX8ULP_SYSCTRL0_DSP_STALL);
+
+ arm_smccc_smc(IMX8ULP_SIP_HIFI_XRDC, 0, 0, 0, 0, 0, 0, 0, &res);
+
+ regmap_update_bits(priv->regmap, IMX8ULP_SIM_LPAV_REG_SYSCTRL0,
+ IMX8ULP_SYSCTRL0_DSP_RST, 0);
+ regmap_update_bits(priv->regmap, IMX8ULP_SIM_LPAV_REG_SYSCTRL0,
+ IMX8ULP_SYSCTRL0_DSP_DBG_RST, 0);
+
+ return 0;
+}
+
+static const struct imx_dsp_rproc_dcfg imx_dsp_rproc_cfg_imx8mp = {
+ .src_reg = IMX8M_AudioDSP_REG2,
+ .src_mask = IMX8M_AudioDSP_REG2_RUNSTALL,
+ .src_start = 0,
+ .src_stop = IMX8M_AudioDSP_REG2_RUNSTALL,
+ .att = imx_dsp_rproc_att_imx8mp,
+ .att_size = ARRAY_SIZE(imx_dsp_rproc_att_imx8mp),
+ .method = IMX_DSP_MMIO,
+ .reset = imx8mp_dsp_reset,
+};
+
+static const struct imx_dsp_rproc_dcfg imx_dsp_rproc_cfg_imx8ulp = {
+ .src_reg = IMX8ULP_SIM_LPAV_REG_SYSCTRL0,
+ .src_mask = IMX8ULP_SYSCTRL0_DSP_STALL,
+ .src_start = 0,
+ .src_stop = IMX8ULP_SYSCTRL0_DSP_STALL,
+ .att = imx_dsp_rproc_att_imx8ulp,
+ .att_size = ARRAY_SIZE(imx_dsp_rproc_att_imx8ulp),
+ .method = IMX_DSP_MMIO,
+ .reset = imx8ulp_dsp_reset,
+};
+
+static const struct imx_dsp_rproc_dcfg imx_dsp_rproc_cfg_imx8qxp = {
+ .att = imx_dsp_rproc_att_imx8qxp,
+ .att_size = ARRAY_SIZE(imx_dsp_rproc_att_imx8qxp),
+ .method = IMX_DSP_SCU_API,
+};
+
+static const struct imx_dsp_rproc_dcfg imx_dsp_rproc_cfg_imx8qm = {
+ .att = imx_dsp_rproc_att_imx8qm,
+ .att_size = ARRAY_SIZE(imx_dsp_rproc_att_imx8qm),
+ .method = IMX_DSP_SCU_API,
+};
+
+static int imx_dsp_rproc_ready(struct rproc *rproc)
+{
+ struct imx_dsp_rproc *priv = rproc->priv;
+ int i;
+
+ if (!priv->rxdb_ch)
+ return 0;
+
+ for (i = 0; i < REMOTE_READY_WAIT_MAX_RETRIES; i++) {
+ if (priv->flags & REMOTE_IS_READY)
+ return 0;
+ usleep_range(100, 200);
+ }
+
+ return -ETIMEDOUT;
+}
+
+static int imx_dsp_rproc_start(struct rproc *rproc)
+{
+ struct imx_dsp_rproc *priv = rproc->priv;
+ const struct imx_dsp_rproc_dcfg *dcfg = priv->dcfg;
+ struct device *dev = priv->dev;
+ int ret;
+
+ switch (dcfg->method) {
+ case IMX_DSP_MMIO:
+ ret = regmap_update_bits(priv->regmap,
+ dcfg->src_reg,
+ dcfg->src_mask,
+ dcfg->src_start);
+ break;
+ case IMX_DSP_SCU_API:
+ ret = imx_sc_pm_cpu_start(priv->ipc_handle,
+ IMX_SC_R_DSP,
+ true,
+ rproc->bootaddr);
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
+
+ if (ret)
+ dev_err(dev, "Failed to enable remote core!\n");
+ else
+ ret = imx_dsp_rproc_ready(rproc);
+
+ return ret;
+}
+
+static int imx_dsp_rproc_stop(struct rproc *rproc)
+{
+ struct imx_dsp_rproc *priv = rproc->priv;
+ const struct imx_dsp_rproc_dcfg *dcfg = priv->dcfg;
+ struct device *dev = priv->dev;
+ int ret = 0;
+
+ if (rproc->state == RPROC_CRASHED) {
+ priv->flags &= ~REMOTE_IS_READY;
+ return 0;
+ }
+
+ switch (dcfg->method) {
+ case IMX_DSP_MMIO:
+ ret = regmap_update_bits(priv->regmap, dcfg->src_reg, dcfg->src_mask,
+ dcfg->src_stop);
+ break;
+ case IMX_DSP_SCU_API:
+ ret = imx_sc_pm_cpu_start(priv->ipc_handle,
+ IMX_SC_R_DSP,
+ false,
+ rproc->bootaddr);
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
+
+ if (ret)
+ dev_err(dev, "Failed to stop remote core\n");
+ else
+ priv->flags &= ~REMOTE_IS_READY;
+
+ return ret;
+}
+
+static int imx_dsp_rproc_sys_to_da(struct imx_dsp_rproc *priv, u64 sys,
+ size_t len, u64 *da)
+{
+ const struct imx_dsp_rproc_dcfg *dcfg = priv->dcfg;
+ int i;
+
+ /* parse address translation table */
+ for (i = 0; i < dcfg->att_size; i++) {
+ const struct imx_dsp_rproc_att *att = &dcfg->att[i];
+
+ if (sys >= att->sa && sys + len <= att->sa + att->size) {
+ unsigned int offset = sys - att->sa;
+
+ *da = att->da + offset;
+ return 0;
+ }
+ }
+
+ return -ENOENT;
+}
+
+static void imx_dsp_rproc_vq_work(struct work_struct *work)
+{
+ struct imx_dsp_rproc *priv = container_of(work, struct imx_dsp_rproc,
+ rproc_work);
+
+ rproc_vq_interrupt(priv->rproc, 0);
+ rproc_vq_interrupt(priv->rproc, 1);
+}
+
+static void imx_dsp_rproc_rx_callback(struct mbox_client *cl, void *data)
+{
+ struct rproc *rproc = dev_get_drvdata(cl->dev);
+ struct imx_dsp_rproc *priv = rproc->priv;
+ u32 message = (u32)(*(u32 *)data);
+
+ dev_dbg(priv->dev, "mbox msg: 0x%x\n", message);
+
+ switch (message) {
+ case RP_MBOX_SUSPEND_ACK:
+ complete(&priv->pm_comp);
+ break;
+ case RP_MBOX_RESUME_ACK:
+ complete(&priv->pm_comp);
+ break;
+ default:
+ queue_work(priv->workqueue, &priv->rproc_work);
+ break;
+ }
+}
+
+static void imx_dsp_rproc_rxdb_callback(struct mbox_client *cl, void *msg)
+{
+ struct rproc *rproc = dev_get_drvdata(cl->dev);
+ struct imx_dsp_rproc *priv = rproc->priv;
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->mbox_lock, flags);
+ priv->flags |= REMOTE_IS_READY;
+ spin_unlock_irqrestore(&priv->mbox_lock, flags);
+}
+
+static int imx_dsp_rproc_mbox_init(struct imx_dsp_rproc *priv)
+{
+ struct device *dev = priv->dev;
+ struct mbox_client *cl;
+ int ret;
+
+ if (!of_get_property(dev->of_node, "mbox-names", NULL))
+ return 0;
+
+ spin_lock_init(&priv->mbox_lock);
+
+ cl = &priv->cl;
+ cl->dev = dev;
+ cl->tx_block = true;
+ cl->tx_tout = 100;
+ cl->knows_txdone = false;
+ cl->rx_callback = imx_dsp_rproc_rx_callback;
+
+ priv->tx_ch = mbox_request_channel_byname(cl, "tx");
+ if (IS_ERR(priv->tx_ch)) {
+ ret = PTR_ERR(priv->tx_ch);
+ dev_dbg(cl->dev, "failed to request tx mailbox channel: %d\n",
+ ret);
+ goto err_out;
+ }
+
+ priv->rx_ch = mbox_request_channel_byname(cl, "rx");
+ if (IS_ERR(priv->rx_ch)) {
+ ret = PTR_ERR(priv->rx_ch);
+ dev_dbg(cl->dev, "failed to request rx mailbox channel: %d\n",
+ ret);
+ goto err_out;
+ }
+
+ cl = &priv->cl_rxdb;
+ cl->dev = dev;
+ cl->rx_callback = imx_dsp_rproc_rxdb_callback;
+
+ /*
+ * RX door bell is used to receive the ready signal from remote
+ * after the partition reset of A core.
+ */
+ priv->rxdb_ch = mbox_request_channel_byname(cl, "rxdb");
+ if (IS_ERR(priv->rxdb_ch)) {
+ ret = PTR_ERR(priv->rxdb_ch);
+ dev_dbg(cl->dev, "failed to request mbox chan rxdb, ret %d\n",
+ ret);
+ goto err_out;
+ }
+
+ return 0;
+
+err_out:
+ if (!IS_ERR(priv->tx_ch))
+ mbox_free_channel(priv->tx_ch);
+ if (!IS_ERR(priv->rx_ch))
+ mbox_free_channel(priv->rx_ch);
+ if (!IS_ERR(priv->rxdb_ch))
+ mbox_free_channel(priv->rxdb_ch);
+
+ return ret;
+}
+
+static void imx_dsp_rproc_free_mbox(struct imx_dsp_rproc *priv)
+{
+ mbox_free_channel(priv->tx_ch);
+ mbox_free_channel(priv->rx_ch);
+ mbox_free_channel(priv->rxdb_ch);
+}
+
+static int imx_dsp_rproc_add_carveout(struct imx_dsp_rproc *priv)
+{
+ const struct imx_dsp_rproc_dcfg *dcfg = priv->dcfg;
+ struct rproc *rproc = priv->rproc;
+ struct device *dev = priv->dev;
+ struct device_node *np = dev->of_node;
+ struct of_phandle_iterator it;
+ struct rproc_mem_entry *mem;
+ struct reserved_mem *rmem;
+ void __iomem *cpu_addr;
+ int a;
+ u64 da;
+
+ /* remap required addresses */
+ for (a = 0; a < dcfg->att_size; a++) {
+ const struct imx_dsp_rproc_att *att = &dcfg->att[a];
+
+ if (!(att->flags & ATT_OWN))
+ continue;
+
+ if (imx_dsp_rproc_sys_to_da(priv, att->sa, att->size, &da))
+ return -EINVAL;
+
+ cpu_addr = devm_ioremap_wc(dev, att->sa, att->size);
+
+ /* Register memory region */
+ mem = rproc_mem_entry_init(dev, cpu_addr, (dma_addr_t)att->sa,
+ att->size, da,
+ NULL,
+ NULL,
+ "dsp_mem");
+
+ if (mem)
+ rproc_coredump_add_segment(rproc, da, att->size);
+ else
+ return -ENOMEM;
+
+ rproc_add_carveout(rproc, mem);
+ }
+
+ of_phandle_iterator_init(&it, np, "memory-region", NULL, 0);
+ while (of_phandle_iterator_next(&it) == 0) {
+ /*
+ * Ignore the first memory region which will be used vdev buffer.
+ * No need to do extra handlings, rproc_add_virtio_dev will handle it.
+ */
+ if (!strcmp(it.node->name, "vdev0buffer"))
+ continue;
+
+ rmem = of_reserved_mem_lookup(it.node);
+ if (!rmem) {
+ dev_err(dev, "unable to acquire memory-region\n");
+ return -EINVAL;
+ }
+
+ if (imx_dsp_rproc_sys_to_da(priv, rmem->base, rmem->size, &da))
+ return -EINVAL;
+
+ cpu_addr = devm_ioremap_wc(dev, rmem->base, rmem->size);
+
+ /* Register memory region */
+ mem = rproc_mem_entry_init(dev, cpu_addr, (dma_addr_t)rmem->base,
+ rmem->size, da,
+ NULL,
+ NULL,
+ it.node->name);
+
+ if (mem)
+ rproc_coredump_add_segment(rproc, da, rmem->size);
+ else
+ return -ENOMEM;
+
+ rproc_add_carveout(rproc, mem);
+ }
+
+ return 0;
+}
+
+/*
+ * imx_dsp_rproc_elf_load_segments() specially check if memsz is zero
+ * or not.
+ */
+static int imx_dsp_rproc_elf_load_segments(struct rproc *rproc,
+ const struct firmware *fw)
+{
+ struct device *dev = &rproc->dev;
+ u8 class = fw_elf_get_class(fw);
+ u32 elf_phdr_get_size = elf_size_of_phdr(class);
+ const u8 *elf_data = fw->data;
+ const void *ehdr, *phdr;
+ int i, ret = 0;
+ u16 phnum;
+
+ ehdr = elf_data;
+ phnum = elf_hdr_get_e_phnum(class, ehdr);
+ phdr = elf_data + elf_hdr_get_e_phoff(class, ehdr);
+
+ /* go through the available ELF segments */
+ for (i = 0; i < phnum; i++, phdr += elf_phdr_get_size) {
+ u64 da = elf_phdr_get_p_paddr(class, phdr);
+ u64 memsz = elf_phdr_get_p_memsz(class, phdr);
+ u64 filesz = elf_phdr_get_p_filesz(class, phdr);
+ u64 offset = elf_phdr_get_p_offset(class, phdr);
+ u32 type = elf_phdr_get_p_type(class, phdr);
+ void *ptr;
+ bool is_iomem;
+
+ if (type != PT_LOAD || !memsz)
+ continue;
+
+ dev_dbg(dev, "phdr: type %d da 0x%llx memsz 0x%llx filesz 0x%llx\n",
+ type, da, memsz, filesz);
+
+ if (filesz > memsz) {
+ dev_err(dev, "bad phdr filesz 0x%llx memsz 0x%llx\n",
+ filesz, memsz);
+ ret = -EINVAL;
+ break;
+ }
+
+ if (offset + filesz > fw->size) {
+ dev_err(dev, "truncated fw: need 0x%llx avail 0x%zx\n",
+ offset + filesz, fw->size);
+ ret = -EINVAL;
+ break;
+ }
+
+ if (!rproc_u64_fit_in_size_t(memsz)) {
+ dev_err(dev, "size (%llx) does not fit in size_t type\n",
+ memsz);
+ ret = -EOVERFLOW;
+ break;
+ }
+
+ /* grab the kernel address for this device address */
+ ptr = rproc_da_to_va(rproc, da, memsz, &is_iomem);
+ if (!ptr) {
+ dev_err(dev, "bad phdr da 0x%llx mem 0x%llx\n", da,
+ memsz);
+ ret = -EINVAL;
+ break;
+ }
+
+ /* put the segment where the remote processor expects it */
+ if (filesz)
+ memcpy(ptr, elf_data + offset, filesz);
+
+ /*
+ * Zero out remaining memory for this segment.
+ *
+ * This isn't strictly required since dma_alloc_coherent already
+ * did this for us. albeit harmless, we may consider removing
+ * this.
+ */
+ if (memsz > filesz)
+ memset(ptr + filesz, 0, memsz - filesz);
+ }
+
+ return ret;
+}
+
+static int imx_dsp_rproc_prepare(struct rproc *rproc)
+{
+ struct imx_dsp_rproc *priv = rproc->priv;
+ struct device *dev = priv->dev;
+ struct rproc_mem_entry *carveout;
+ int ret;
+
+ ret = imx_dsp_rproc_add_carveout(priv);
+ if (ret) {
+ dev_err(dev, "failed on imx_dsp_rproc_add_carveout\n");
+ return ret;
+ }
+
+ pm_runtime_get_sync(dev);
+
+ /* clear buffers */
+ list_for_each_entry(carveout, &rproc->carveouts, node) {
+ if (carveout->va)
+ memset(carveout->va, 0, carveout->len);
+ }
+
+ return 0;
+}
+
+static int imx_dsp_rproc_unprepare(struct rproc *rproc)
+{
+ struct imx_dsp_rproc *priv = rproc->priv;
+
+ pm_runtime_put_sync(priv->dev);
+
+ return 0;
+}
+
+static void imx_dsp_rproc_kick(struct rproc *rproc, int vqid)
+{
+ struct imx_dsp_rproc *priv = rproc->priv;
+ int err;
+ __u32 mmsg;
+
+ if (!priv->tx_ch) {
+ dev_err(priv->dev, "No initialized mbox tx channel\n");
+ return;
+ }
+
+ /*
+ * Send the index of the triggered virtqueue as the mu payload.
+ * Let remote processor know which virtqueue is used.
+ */
+ mmsg = vqid;
+
+ err = mbox_send_message(priv->tx_ch, (void *)&mmsg);
+ if (err < 0)
+ dev_err(priv->dev, "%s: failed (%d, err:%d)\n",
+ __func__, vqid, err);
+}
+
+static const struct rproc_ops imx_dsp_rproc_ops = {
+ .prepare = imx_dsp_rproc_prepare,
+ .unprepare = imx_dsp_rproc_unprepare,
+ .start = imx_dsp_rproc_start,
+ .stop = imx_dsp_rproc_stop,
+ .kick = imx_dsp_rproc_kick,
+ .load = imx_dsp_rproc_elf_load_segments,
+ .parse_fw = rproc_elf_load_rsc_table,
+ .sanity_check = rproc_elf_sanity_check,
+ .get_boot_addr = rproc_elf_get_boot_addr,
+};
+
+static int imx_dsp_attach_pm_domains(struct imx_dsp_rproc *priv)
+{
+ struct device *dev = priv->dev;
+ int ret, i;
+
+ priv->num_domains = of_count_phandle_with_args(dev->of_node,
+ "power-domains",
+ "#power-domain-cells");
+ if (priv->num_domains <= 1)
+ return 0;
+
+ priv->pd_dev = devm_kmalloc_array(dev, priv->num_domains,
+ sizeof(*priv->pd_dev),
+ GFP_KERNEL);
+ if (!priv->pd_dev)
+ return -ENOMEM;
+
+ priv->pd_dev_link = devm_kmalloc_array(dev, priv->num_domains,
+ sizeof(*priv->pd_dev_link),
+ GFP_KERNEL);
+ if (!priv->pd_dev_link)
+ return -ENOMEM;
+
+ for (i = 0; i < priv->num_domains; i++) {
+ priv->pd_dev[i] = dev_pm_domain_attach_by_id(dev, i);
+ if (IS_ERR(priv->pd_dev[i]))
+ return PTR_ERR(priv->pd_dev[i]);
+
+ priv->pd_dev_link[i] = device_link_add(dev,
+ priv->pd_dev[i],
+ DL_FLAG_STATELESS |
+ DL_FLAG_PM_RUNTIME |
+ DL_FLAG_RPM_ACTIVE);
+ if (IS_ERR(priv->pd_dev_link[i])) {
+ dev_pm_domain_detach(priv->pd_dev[i], false);
+ ret = PTR_ERR(priv->pd_dev_link[i]);
+ goto detach_pm;
+ }
+ }
+
+ return 0;
+
+detach_pm:
+ while (--i >= 0) {
+ device_link_del(priv->pd_dev_link[i]);
+ dev_pm_domain_detach(priv->pd_dev[i], false);
+ }
+
+ return ret;
+}
+
+static int imx_dsp_detach_pm_domains(struct imx_dsp_rproc *priv)
+{
+ int i;
+
+ if (priv->num_domains <= 1)
+ return 0;
+
+ for (i = 0; i < priv->num_domains; i++) {
+ device_link_del(priv->pd_dev_link[i]);
+ dev_pm_domain_detach(priv->pd_dev[i], false);
+ }
+
+ return 0;
+}
+
+static int imx_dsp_rproc_detect_mode(struct imx_dsp_rproc *priv)
+{
+ const struct imx_dsp_rproc_dcfg *dcfg = priv->dcfg;
+ struct device *dev = priv->dev;
+ struct regmap *regmap;
+ int ret = 0;
+
+ switch (dcfg->method) {
+ case IMX_DSP_SCU_API:
+ ret = imx_scu_get_handle(&priv->ipc_handle);
+ if (ret)
+ return ret;
+ return 0;
+ case IMX_DSP_MMIO:
+ regmap = syscon_regmap_lookup_by_phandle(dev->of_node, "fsl,dsp-ctrl");
+ if (IS_ERR(regmap)) {
+ dev_err(dev, "failed to find syscon\n");
+ return PTR_ERR(regmap);
+ }
+
+ priv->regmap = regmap;
+ default:
+ break;
+ }
+
+ return ret;
+}
+
+static const char *imx_dsp_clks_names[DSP_RPROC_CLK_MAX] = {
+ /* DSP clocks */
+ "dsp_clk1", "dsp_clk2", "dsp_clk3", "dsp_clk4", "dsp_clk5", "dsp_clk6",
+ "dsp_clk7", "dsp_clk8",
+
+ /* Peripheral clocks */
+ "per_clk1", "per_clk2", "per_clk3", "per_clk4", "per_clk5", "per_clk6",
+ "per_clk7", "per_clk8", "per_clk9", "per_clk10", "per_clk11", "per_clk12",
+ "per_clk13", "per_clk14", "per_clk15", "per_clk16", "per_clk17", "per_clk18",
+};
+
+static int imx_dsp_rproc_clk_get(struct imx_dsp_rproc *priv)
+{
+ int i;
+
+ for (i = 0; i < DSP_RPROC_CLK_MAX; i++) {
+ priv->clks[i] = devm_clk_get_optional(priv->dev,
+ imx_dsp_clks_names[i]);
+ if (IS_ERR(priv->clks[i])) {
+ dev_err(priv->dev, "Failed to get clock %s\n",
+ imx_dsp_clks_names[i]);
+ return PTR_ERR(priv->clks[i]);
+ }
+ }
+
+ return 0;
+}
+
+static int imx_dsp_rproc_clk_enable(struct imx_dsp_rproc *priv)
+{
+ int i, ret;
+
+ for (i = 0; i < DSP_RPROC_CLK_MAX; i++) {
+ ret = clk_prepare_enable(priv->clks[i]);
+ if (ret < 0) {
+ dev_err(priv->dev, "Failed to enable clk %s\n",
+ imx_dsp_clks_names[i]);
+ goto err_dsp_clks;
+ }
+ }
+
+ return 0;
+
+err_dsp_clks:
+ while (--i >= 0)
+ clk_disable_unprepare(priv->clks[i]);
+
+ return ret;
+}
+
+static void imx_dsp_rproc_clk_disable(struct imx_dsp_rproc *priv)
+{
+ int i;
+
+ for (i = 0; i < DSP_RPROC_CLK_MAX; i++)
+ clk_disable_unprepare(priv->clks[i]);
+}
+
+static int imx_dsp_rproc_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ const struct imx_dsp_rproc_dcfg *dcfg;
+ struct imx_dsp_rproc *priv;
+ struct rproc *rproc;
+ const char *fw_name;
+ int ret;
+
+ dcfg = of_device_get_match_data(dev);
+ if (!dcfg)
+ return -ENODEV;
+
+ ret = rproc_of_parse_firmware(dev, 0, &fw_name);
+ if (ret) {
+ dev_err(dev, "failed to parse firmware-name property, ret = %d\n",
+ ret);
+ return ret;
+ }
+
+ rproc = rproc_alloc(dev, "imx-dsp-rproc", &imx_dsp_rproc_ops, fw_name,
+ sizeof(*priv));
+ if (!rproc)
+ return -ENOMEM;
+
+ priv = rproc->priv;
+ priv->rproc = rproc;
+ priv->dcfg = dcfg;
+ priv->dev = dev;
+
+ dev_set_drvdata(dev, rproc);
+
+ priv->workqueue = create_workqueue(dev_name(dev));
+ if (!priv->workqueue) {
+ dev_err(dev, "cannot create workqueue\n");
+ ret = -ENOMEM;
+ goto err_wkq;
+ }
+
+ INIT_WORK(&priv->rproc_work, imx_dsp_rproc_vq_work);
+
+ ret = imx_dsp_rproc_detect_mode(priv);
+ if (ret) {
+ dev_err(dev, "failed on imx_dsp_rproc_detect_mode\n");
+ goto err_detect;
+ }
+
+ ret = imx_dsp_attach_pm_domains(priv);
+ if (ret) {
+ dev_err(dev, "failed on imx_dsp_attach_pm_domains\n");
+ goto err_pm;
+ }
+
+ ret = imx_dsp_rproc_clk_get(priv);
+ if (ret) {
+ dev_err(dev, "failed on imx_dsp_rproc_clk_get\n");
+ goto err_clk_get;
+ }
+
+ init_completion(&priv->pm_comp);
+ rproc->auto_boot = false;
+ ret = rproc_add(rproc);
+ if (ret) {
+ dev_err(dev, "rproc_add failed\n");
+ goto err_rproc_add;
+ }
+
+ pm_runtime_enable(dev);
+
+ return 0;
+
+err_rproc_add:
+err_clk_get:
+ imx_dsp_detach_pm_domains(priv);
+err_pm:
+err_detect:
+ destroy_workqueue(priv->workqueue);
+err_wkq:
+ rproc_free(rproc);
+
+ return ret;
+}
+
+static int imx_dsp_rproc_remove(struct platform_device *pdev)
+{
+ struct rproc *rproc = platform_get_drvdata(pdev);
+ struct imx_dsp_rproc *priv = rproc->priv;
+
+ pm_runtime_disable(&pdev->dev);
+ rproc_del(rproc);
+ imx_dsp_detach_pm_domains(priv);
+ destroy_workqueue(priv->workqueue);
+ rproc_free(rproc);
+
+ return 0;
+}
+
+/* pm runtime */
+static int imx_dsp_runtime_resume(struct device *dev)
+{
+ struct rproc *rproc = dev_get_drvdata(dev);
+ struct imx_dsp_rproc *priv = rproc->priv;
+ const struct imx_dsp_rproc_dcfg *dcfg = priv->dcfg;
+ int ret;
+
+ ret = imx_dsp_rproc_mbox_init(priv);
+ if (ret) {
+ dev_err(dev, "failed on imx_dsp_rproc_mbox_init\n");
+ return ret;
+ }
+
+ ret = imx_dsp_rproc_clk_enable(priv);
+ if (ret) {
+ dev_err(dev, "failed on imx_dsp_rproc_clk_enable\n");
+ return ret;
+ }
+
+ /* reset DSP if needed */
+ if (dcfg->reset)
+ dcfg->reset(priv);
+
+ return 0;
+}
+
+static int imx_dsp_runtime_suspend(struct device *dev)
+{
+ struct rproc *rproc = dev_get_drvdata(dev);
+ struct imx_dsp_rproc *priv = rproc->priv;
+
+ imx_dsp_rproc_clk_disable(priv);
+
+ imx_dsp_rproc_free_mbox(priv);
+
+ return 0;
+}
+
+static void imx_dsp_load_firmware(const struct firmware *fw, void *context)
+{
+ struct rproc *rproc = context;
+ int ret;
+
+ /* load the ELF segments to memory */
+ ret = rproc_load_segments(rproc, fw);
+ if (ret)
+ goto out;
+
+ /* power up the remote processor */
+ ret = rproc->ops->start(rproc);
+ if (ret)
+ goto out;
+
+ /* same flow as first start */
+ rproc->ops->kick(rproc, 0);
+
+out:
+ release_firmware(fw);
+}
+
+static int imx_dsp_suspend(struct device *dev)
+{
+ struct rproc *rproc = dev_get_drvdata(dev);
+ struct imx_dsp_rproc *priv = rproc->priv;
+ __u32 mmsg = RP_MBOX_SUSPEND_SYSTEM;
+ int ret;
+
+ if (rproc->state == RPROC_RUNNING) {
+ reinit_completion(&priv->pm_comp);
+
+ ret = mbox_send_message(priv->tx_ch, (void *)&mmsg);
+ if (ret < 0) {
+ dev_err(dev, "PM mbox_send_message failed: %d\n", ret);
+ return ret;
+ }
+
+ if (!wait_for_completion_timeout(&priv->pm_comp, msecs_to_jiffies(100)))
+ return -EBUSY;
+ }
+
+ return pm_runtime_force_suspend(dev);
+}
+
+static int imx_dsp_resume(struct device *dev)
+{
+ struct rproc *rproc = dev_get_drvdata(dev);
+ int ret = 0;
+
+ ret = pm_runtime_force_resume(dev);
+ if (ret)
+ return ret;
+
+ if (rproc->state == RPROC_RUNNING) {
+ /*TODO: load firmware and start */
+ ret = request_firmware_nowait(THIS_MODULE,
+ FW_ACTION_UEVENT,
+ rproc->firmware,
+ dev,
+ GFP_KERNEL,
+ rproc,
+ imx_dsp_load_firmware);
+ if (ret < 0) {
+ dev_err(dev, "load firmware failed: %d\n", ret);
+ goto err;
+ }
+ }
+
+ return 0;
+
+err:
+ pm_runtime_force_suspend(dev);
+
+ return ret;
+}
+
+static const struct dev_pm_ops imx_dsp_rproc_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(imx_dsp_suspend, imx_dsp_resume)
+ SET_RUNTIME_PM_OPS(imx_dsp_runtime_suspend,
+ imx_dsp_runtime_resume, NULL)
+};
+
+static const struct of_device_id imx_dsp_rproc_of_match[] = {
+ { .compatible = "fsl,imx8qxp-hifi4", .data = &imx_dsp_rproc_cfg_imx8qxp },
+ { .compatible = "fsl,imx8qm-hifi4", .data = &imx_dsp_rproc_cfg_imx8qm },
+ { .compatible = "fsl,imx8mp-hifi4", .data = &imx_dsp_rproc_cfg_imx8mp },
+ { .compatible = "fsl,imx8ulp-hifi4", .data = &imx_dsp_rproc_cfg_imx8ulp },
+ {},
+};
+MODULE_DEVICE_TABLE(of, imx_dsp_rproc_of_match);
+
+static struct platform_driver imx_dsp_rproc_driver = {
+ .probe = imx_dsp_rproc_probe,
+ .remove = imx_dsp_rproc_remove,
+ .driver = {
+ .name = "imx-dsp-rproc",
+ .of_match_table = imx_dsp_rproc_of_match,
+ .pm = &imx_dsp_rproc_pm_ops,
+ },
+};
+module_platform_driver(imx_dsp_rproc_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("i.MX HiFi Core Remote Processor Control Driver");
+MODULE_AUTHOR("Shengjiu Wang <[email protected]>");
--
2.17.1
Hi Shengjiu,
On Wed, Aug 25, 2021 at 03:28:36PM +0800, Shengjiu Wang wrote:
> Provide a basic driver to control DSP processor found on NXP i.MX8QM,
> i.MX8QXP, i.MX8MP and i.MX8ULP.
>
> Currently it is able to resolve addresses between DSP and main CPU,
> start and stop the processor, suspend and resume.
>
> The communication between DSP and main CPU is based on mailbox, there
> are three mailbox channels (tx, rx, rxdb).
>
> This driver was tested on NXP i.MX8QM, i.MX8QXP, i.MX8MP and i.MX8ULP.
>
> Signed-off-by: Shengjiu Wang <[email protected]>
> ---
> changes in v2:
> - change syscon to fsl,dsp-ctrl
>
> drivers/remoteproc/Kconfig | 11 +
> drivers/remoteproc/Makefile | 1 +
> drivers/remoteproc/imx_dsp_rproc.c | 1078 ++++++++++++++++++++++++++++
> 3 files changed, 1090 insertions(+)
> create mode 100644 drivers/remoteproc/imx_dsp_rproc.c
>
> diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig
> index 9a6eedc3994a..890a14e6f3f9 100644
> --- a/drivers/remoteproc/Kconfig
> +++ b/drivers/remoteproc/Kconfig
> @@ -34,6 +34,17 @@ config IMX_REMOTEPROC
>
> It's safe to say N here.
>
> +config IMX_DSP_REMOTEPROC
> + tristate "i.MX DSP remoteproc support"
> + depends on ARCH_MXC
> + depends on HAVE_ARM_SMCCC
> + select MAILBOX
> + help
> + Say y here to support iMX's DSP remote processors via the remote
> + processor framework.
> +
> + It's safe to say N here.
> +
> config INGENIC_VPU_RPROC
> tristate "Ingenic JZ47xx VPU remoteproc support"
> depends on MIPS || COMPILE_TEST
> diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile
> index bb26c9e4ef9c..37d5cb1c04bf 100644
> --- a/drivers/remoteproc/Makefile
> +++ b/drivers/remoteproc/Makefile
> @@ -12,6 +12,7 @@ remoteproc-y += remoteproc_virtio.o
> remoteproc-y += remoteproc_elf_loader.o
> obj-$(CONFIG_REMOTEPROC_CDEV) += remoteproc_cdev.o
> obj-$(CONFIG_IMX_REMOTEPROC) += imx_rproc.o
> +obj-$(CONFIG_IMX_DSP_REMOTEPROC) += imx_dsp_rproc.o
> obj-$(CONFIG_INGENIC_VPU_RPROC) += ingenic_rproc.o
> obj-$(CONFIG_MTK_SCP) += mtk_scp.o mtk_scp_ipi.o
> obj-$(CONFIG_OMAP_REMOTEPROC) += omap_remoteproc.o
> diff --git a/drivers/remoteproc/imx_dsp_rproc.c b/drivers/remoteproc/imx_dsp_rproc.c
> new file mode 100644
> index 000000000000..ce0596694122
> --- /dev/null
> +++ b/drivers/remoteproc/imx_dsp_rproc.c
> @@ -0,0 +1,1078 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +// Copyright 2021 NXP
> +
> +#include <linux/clk.h>
> +#include <linux/err.h>
> +#include <linux/interrupt.h>
> +#include <linux/kernel.h>
> +#include <linux/mailbox_client.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/module.h>
> +#include <linux/of_address.h>
> +#include <linux/of_reserved_mem.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_domain.h>
> +#include <linux/regmap.h>
> +#include <linux/remoteproc.h>
> +#include <linux/slab.h>
> +#include <linux/pm_runtime.h>
Alphabetical order
> +#include <linux/workqueue.h>
> +#include <linux/firmware/imx/sci.h>
Same
> +#include <dt-bindings/firmware/imx/rsrc.h>
> +#include <linux/arm-smccc.h>
Same
> +
> +#include "remoteproc_internal.h"
> +#include "remoteproc_elf_helpers.h"
Same
> +
> +enum imx_dsp_rp_mbox_messages {
> + RP_MBOX_SUSPEND_SYSTEM = 0xFF11,
> + RP_MBOX_SUSPEND_ACK = 0xFF12,
> + RP_MBOX_RESUME_SYSTEM = 0xFF13,
> + RP_MBOX_RESUME_ACK = 0xFF14,
> +};
> +
> +#define DSP_RPROC_CLK_MAX 32
> +
> +#define REMOTE_IS_READY BIT(0)
> +#define REMOTE_READY_WAIT_MAX_RETRIES 500
> +
> +/* att flags */
> +/* DSP own area. Can be mapped at probe */
> +#define ATT_OWN BIT(31)
> +#define ATT_IRAM BIT(30)
> +
> +/* i.MX8MP */
> +/* DAP registers */
> +#define IMX8M_DAP_DEBUG 0x28800000
> +#define IMX8M_DAP_DEBUG_SIZE (64 * 1024)
> +#define IMX8M_DAP_PWRCTL (0x4000 + 0x3020)
> +#define IMX8M_PWRCTL_CORERESET BIT(16)
> +
> +/* DSP audio mix registers */
> +#define IMX8M_AudioDSP_REG0 0x100
> +#define IMX8M_AudioDSP_REG1 0x104
> +#define IMX8M_AudioDSP_REG2 0x108
> +#define IMX8M_AudioDSP_REG3 0x10c
> +
> +#define IMX8M_AudioDSP_REG2_RUNSTALL BIT(5)
> +#define IMX8M_AudioDSP_REG2_PWAITMODE BIT(1)
> +
> +/* i.MX8ULP */
> +#define IMX8ULP_SIM_LPAV_REG_SYSCTRL0 0x8
> +#define IMX8ULP_SYSCTRL0_DSP_DBG_RST BIT(25)
> +#define IMX8ULP_SYSCTRL0_DSP_PLAT_CLK_EN BIT(19)
> +#define IMX8ULP_SYSCTRL0_DSP_PBCLK_EN BIT(18)
> +#define IMX8ULP_SYSCTRL0_DSP_CLK_EN BIT(17)
> +#define IMX8ULP_SYSCTRL0_DSP_RST BIT(16)
> +#define IMX8ULP_SYSCTRL0_DSP_OCD_HALT BIT(14)
> +#define IMX8ULP_SYSCTRL0_DSP_STALL BIT(13)
> +
> +#define IMX8ULP_SIP_HIFI_XRDC 0xc200000e
For all of the above defines, either align them all or not at all.
> +
> +/* address translation table */
> +struct imx_dsp_rproc_att {
> + u32 da; /* device address (From Cortex M4 view)*/
> + u32 sa; /* system bus address */
> + u32 size; /* size of reg range */
> + int flags;
> +};
This is already defined in imx_rproc.c - why do we need another definition here?
> +
> +/* Remote core start/stop method */
> +enum imx_dsp_rproc_method {
> + /* Through syscon regmap */
> + IMX_DSP_MMIO,
> + IMX_DSP_SCU_API,
> +};
From where I stand it would be worth merging the above with imx_rproc_method
found in imx_rproc.c. I don't see a need for duplication.
> +
> +struct imx_dsp_rproc {
> + struct device *dev;
> + struct regmap *regmap;
> + struct rproc *rproc;
> + const struct imx_dsp_rproc_dcfg *dcfg;
> + struct clk *clks[DSP_RPROC_CLK_MAX];
> + struct mbox_client cl;
> + struct mbox_client cl_rxdb;
> + struct mbox_chan *tx_ch;
> + struct mbox_chan *rx_ch;
> + struct mbox_chan *rxdb_ch;
> + struct device **pd_dev;
> + struct device_link **pd_dev_link;
> + struct imx_sc_ipc *ipc_handle;
> + struct work_struct rproc_work;
> + struct workqueue_struct *workqueue;
> + struct completion pm_comp;
> + spinlock_t mbox_lock; /* lock for mbox */
> + int num_domains;
> + u32 flags;
> +};
> +
> +struct imx_dsp_rproc_dcfg {
> + u32 src_reg;
> + u32 src_mask;
> + u32 src_start;
> + u32 src_stop;
> + const struct imx_dsp_rproc_att *att;
> + size_t att_size;
> + enum imx_dsp_rproc_method method;
The above is similar to imx_rproc_cfg. As such:
struct imx_dsp_rproc_dcfg {
struct imx_rproc_cfg *dcfg;
int (*reset)(struct imx_dsp_rproc *priv);
};
> + int (*reset)(struct imx_dsp_rproc *priv);
> +};
> +
> +static const struct imx_dsp_rproc_att imx_dsp_rproc_att_imx8qm[] = {
> + /* dev addr , sys addr , size , flags */
> + { 0x596e8000, 0x556e8000, 0x00008000, ATT_OWN },
> + { 0x596f0000, 0x556f0000, 0x00008000, ATT_OWN },
> + { 0x596f8000, 0x556f8000, 0x00000800, ATT_OWN | ATT_IRAM},
> + { 0x55700000, 0x55700000, 0x00070000, ATT_OWN },
> + /* DDR (Data) */
> + { 0x80000000, 0x80000000, 0x60000000, 0},
> +};
> +
> +static const struct imx_dsp_rproc_att imx_dsp_rproc_att_imx8qxp[] = {
> + /* dev addr , sys addr , size , flags */
> + { 0x596e8000, 0x596e8000, 0x00008000, ATT_OWN },
> + { 0x596f0000, 0x596f0000, 0x00008000, ATT_OWN },
> + { 0x596f8000, 0x596f8000, 0x00000800, ATT_OWN | ATT_IRAM},
> + { 0x59700000, 0x59700000, 0x00070000, ATT_OWN },
> + /* DDR (Data) */
> + { 0x80000000, 0x80000000, 0x60000000, 0},
> +};
> +
> +static const struct imx_dsp_rproc_att imx_dsp_rproc_att_imx8mp[] = {
> + /* dev addr , sys addr , size , flags */
> + { 0x3b6e8000, 0x3b6e8000, 0x00008000, ATT_OWN },
> + { 0x3b6f0000, 0x3b6f0000, 0x00008000, ATT_OWN },
> + { 0x3b6f8000, 0x3b6f8000, 0x00000800, ATT_OWN | ATT_IRAM},
> + { 0x3b700000, 0x3b700000, 0x00040000, ATT_OWN },
> + /* DDR (Data) */
> + { 0x40000000, 0x40000000, 0x80000000, 0},
> +};
> +
> +static const struct imx_dsp_rproc_att imx_dsp_rproc_att_imx8ulp[] = {
> + /* dev addr , sys addr , size , flags */
> + { 0x21170000, 0x21170000, 0x00010000, ATT_OWN | ATT_IRAM},
> + { 0x21180000, 0x21180000, 0x00010000, ATT_OWN },
> + /* DDR (Data) */
> + { 0x0c000000, 0x80000000, 0x10000000, 0},
> + { 0x30000000, 0x90000000, 0x10000000, 0},
> +};
> +
> +static int imx8mp_dsp_reset(struct imx_dsp_rproc *priv)
> +{
> + void __iomem *dap = ioremap_wc(IMX8M_DAP_DEBUG, IMX8M_DAP_DEBUG_SIZE);
> + int pwrctl;
> +
> + /* put DSP into reset and stall */
> + pwrctl = readl(dap + IMX8M_DAP_PWRCTL);
> + pwrctl |= IMX8M_PWRCTL_CORERESET;
> + writel(pwrctl, dap + IMX8M_DAP_PWRCTL);
> +
> + /* keep reset asserted for 10 cycles */
> + usleep_range(1, 2);
> +
> + regmap_update_bits(priv->regmap, IMX8M_AudioDSP_REG2,
> + IMX8M_AudioDSP_REG2_RUNSTALL,
> + IMX8M_AudioDSP_REG2_RUNSTALL);
> +
> + /* take the DSP out of reset and keep stalled for FW loading */
> + pwrctl = readl(dap + IMX8M_DAP_PWRCTL);
> + pwrctl &= ~IMX8M_PWRCTL_CORERESET;
> + writel(pwrctl, dap + IMX8M_DAP_PWRCTL);
> +
> + iounmap(dap);
> + return 0;
> +}
> +
> +static int imx8ulp_dsp_reset(struct imx_dsp_rproc *priv)
> +{
> + struct arm_smccc_res res;
> +
> + regmap_update_bits(priv->regmap, IMX8ULP_SIM_LPAV_REG_SYSCTRL0,
> + IMX8ULP_SYSCTRL0_DSP_RST, IMX8ULP_SYSCTRL0_DSP_RST);
> + regmap_update_bits(priv->regmap, IMX8ULP_SIM_LPAV_REG_SYSCTRL0,
> + IMX8ULP_SYSCTRL0_DSP_STALL,
> + IMX8ULP_SYSCTRL0_DSP_STALL);
> +
> + arm_smccc_smc(IMX8ULP_SIP_HIFI_XRDC, 0, 0, 0, 0, 0, 0, 0, &res);
> +
> + regmap_update_bits(priv->regmap, IMX8ULP_SIM_LPAV_REG_SYSCTRL0,
> + IMX8ULP_SYSCTRL0_DSP_RST, 0);
> + regmap_update_bits(priv->regmap, IMX8ULP_SIM_LPAV_REG_SYSCTRL0,
> + IMX8ULP_SYSCTRL0_DSP_DBG_RST, 0);
> +
> + return 0;
> +}
> +
> +static const struct imx_dsp_rproc_dcfg imx_dsp_rproc_cfg_imx8mp = {
> + .src_reg = IMX8M_AudioDSP_REG2,
> + .src_mask = IMX8M_AudioDSP_REG2_RUNSTALL,
> + .src_start = 0,
> + .src_stop = IMX8M_AudioDSP_REG2_RUNSTALL,
> + .att = imx_dsp_rproc_att_imx8mp,
> + .att_size = ARRAY_SIZE(imx_dsp_rproc_att_imx8mp),
> + .method = IMX_DSP_MMIO,
> + .reset = imx8mp_dsp_reset,
> +};
> +
> +static const struct imx_dsp_rproc_dcfg imx_dsp_rproc_cfg_imx8ulp = {
> + .src_reg = IMX8ULP_SIM_LPAV_REG_SYSCTRL0,
> + .src_mask = IMX8ULP_SYSCTRL0_DSP_STALL,
> + .src_start = 0,
> + .src_stop = IMX8ULP_SYSCTRL0_DSP_STALL,
> + .att = imx_dsp_rproc_att_imx8ulp,
> + .att_size = ARRAY_SIZE(imx_dsp_rproc_att_imx8ulp),
> + .method = IMX_DSP_MMIO,
> + .reset = imx8ulp_dsp_reset,
> +};
> +
> +static const struct imx_dsp_rproc_dcfg imx_dsp_rproc_cfg_imx8qxp = {
> + .att = imx_dsp_rproc_att_imx8qxp,
> + .att_size = ARRAY_SIZE(imx_dsp_rproc_att_imx8qxp),
> + .method = IMX_DSP_SCU_API,
> +};
> +
> +static const struct imx_dsp_rproc_dcfg imx_dsp_rproc_cfg_imx8qm = {
> + .att = imx_dsp_rproc_att_imx8qm,
> + .att_size = ARRAY_SIZE(imx_dsp_rproc_att_imx8qm),
> + .method = IMX_DSP_SCU_API,
> +};
> +
> +static int imx_dsp_rproc_ready(struct rproc *rproc)
> +{
> + struct imx_dsp_rproc *priv = rproc->priv;
> + int i;
> +
> + if (!priv->rxdb_ch)
> + return 0;
> +
> + for (i = 0; i < REMOTE_READY_WAIT_MAX_RETRIES; i++) {
> + if (priv->flags & REMOTE_IS_READY)
> + return 0;
> + usleep_range(100, 200);
> + }
> +
> + return -ETIMEDOUT;
> +}
> +
> +static int imx_dsp_rproc_start(struct rproc *rproc)
> +{
> + struct imx_dsp_rproc *priv = rproc->priv;
> + const struct imx_dsp_rproc_dcfg *dcfg = priv->dcfg;
> + struct device *dev = priv->dev;
> + int ret;
> +
> + switch (dcfg->method) {
> + case IMX_DSP_MMIO:
> + ret = regmap_update_bits(priv->regmap,
> + dcfg->src_reg,
> + dcfg->src_mask,
> + dcfg->src_start);
> + break;
> + case IMX_DSP_SCU_API:
> + ret = imx_sc_pm_cpu_start(priv->ipc_handle,
> + IMX_SC_R_DSP,
> + true,
> + rproc->bootaddr);
> + break;
> + default:
> + return -EOPNOTSUPP;
> + }
> +
> + if (ret)
> + dev_err(dev, "Failed to enable remote core!\n");
> + else
> + ret = imx_dsp_rproc_ready(rproc);
> +
> + return ret;
> +}
> +
> +static int imx_dsp_rproc_stop(struct rproc *rproc)
> +{
> + struct imx_dsp_rproc *priv = rproc->priv;
> + const struct imx_dsp_rproc_dcfg *dcfg = priv->dcfg;
> + struct device *dev = priv->dev;
> + int ret = 0;
> +
> + if (rproc->state == RPROC_CRASHED) {
> + priv->flags &= ~REMOTE_IS_READY;
> + return 0;
> + }
> +
> + switch (dcfg->method) {
> + case IMX_DSP_MMIO:
> + ret = regmap_update_bits(priv->regmap, dcfg->src_reg, dcfg->src_mask,
> + dcfg->src_stop);
> + break;
> + case IMX_DSP_SCU_API:
> + ret = imx_sc_pm_cpu_start(priv->ipc_handle,
> + IMX_SC_R_DSP,
> + false,
> + rproc->bootaddr);
> + break;
> + default:
> + return -EOPNOTSUPP;
> + }
> +
> + if (ret)
> + dev_err(dev, "Failed to stop remote core\n");
> + else
> + priv->flags &= ~REMOTE_IS_READY;
> +
> + return ret;
> +}
> +
> +static int imx_dsp_rproc_sys_to_da(struct imx_dsp_rproc *priv, u64 sys,
> + size_t len, u64 *da)
> +{
> + const struct imx_dsp_rproc_dcfg *dcfg = priv->dcfg;
> + int i;
> +
> + /* parse address translation table */
> + for (i = 0; i < dcfg->att_size; i++) {
> + const struct imx_dsp_rproc_att *att = &dcfg->att[i];
> +
> + if (sys >= att->sa && sys + len <= att->sa + att->size) {
> + unsigned int offset = sys - att->sa;
> +
> + *da = att->da + offset;
> + return 0;
> + }
> + }
> +
> + return -ENOENT;
> +}
> +
> +static void imx_dsp_rproc_vq_work(struct work_struct *work)
> +{
> + struct imx_dsp_rproc *priv = container_of(work, struct imx_dsp_rproc,
> + rproc_work);
> +
> + rproc_vq_interrupt(priv->rproc, 0);
> + rproc_vq_interrupt(priv->rproc, 1);
> +}
> +
> +static void imx_dsp_rproc_rx_callback(struct mbox_client *cl, void *data)
> +{
> + struct rproc *rproc = dev_get_drvdata(cl->dev);
> + struct imx_dsp_rproc *priv = rproc->priv;
> + u32 message = (u32)(*(u32 *)data);
> +
> + dev_dbg(priv->dev, "mbox msg: 0x%x\n", message);
> +
> + switch (message) {
> + case RP_MBOX_SUSPEND_ACK:
> + complete(&priv->pm_comp);
> + break;
> + case RP_MBOX_RESUME_ACK:
> + complete(&priv->pm_comp);
> + break;
> + default:
> + queue_work(priv->workqueue, &priv->rproc_work);
> + break;
> + }
> +}
> +
> +static void imx_dsp_rproc_rxdb_callback(struct mbox_client *cl, void *msg)
> +{
> + struct rproc *rproc = dev_get_drvdata(cl->dev);
> + struct imx_dsp_rproc *priv = rproc->priv;
> + unsigned long flags;
> +
> + spin_lock_irqsave(&priv->mbox_lock, flags);
> + priv->flags |= REMOTE_IS_READY;
> + spin_unlock_irqrestore(&priv->mbox_lock, flags);
> +}
> +
> +static int imx_dsp_rproc_mbox_init(struct imx_dsp_rproc *priv)
> +{
> + struct device *dev = priv->dev;
> + struct mbox_client *cl;
> + int ret;
> +
> + if (!of_get_property(dev->of_node, "mbox-names", NULL))
> + return 0;
> +
> + spin_lock_init(&priv->mbox_lock);
> +
> + cl = &priv->cl;
> + cl->dev = dev;
> + cl->tx_block = true;
> + cl->tx_tout = 100;
> + cl->knows_txdone = false;
> + cl->rx_callback = imx_dsp_rproc_rx_callback;
> +
> + priv->tx_ch = mbox_request_channel_byname(cl, "tx");
> + if (IS_ERR(priv->tx_ch)) {
> + ret = PTR_ERR(priv->tx_ch);
> + dev_dbg(cl->dev, "failed to request tx mailbox channel: %d\n",
> + ret);
> + goto err_out;
> + }
> +
> + priv->rx_ch = mbox_request_channel_byname(cl, "rx");
> + if (IS_ERR(priv->rx_ch)) {
> + ret = PTR_ERR(priv->rx_ch);
> + dev_dbg(cl->dev, "failed to request rx mailbox channel: %d\n",
> + ret);
> + goto err_out;
> + }
> +
> + cl = &priv->cl_rxdb;
> + cl->dev = dev;
> + cl->rx_callback = imx_dsp_rproc_rxdb_callback;
> +
> + /*
> + * RX door bell is used to receive the ready signal from remote
> + * after the partition reset of A core.
> + */
> + priv->rxdb_ch = mbox_request_channel_byname(cl, "rxdb");
> + if (IS_ERR(priv->rxdb_ch)) {
> + ret = PTR_ERR(priv->rxdb_ch);
> + dev_dbg(cl->dev, "failed to request mbox chan rxdb, ret %d\n",
> + ret);
> + goto err_out;
> + }
> +
> + return 0;
> +
> +err_out:
> + if (!IS_ERR(priv->tx_ch))
> + mbox_free_channel(priv->tx_ch);
> + if (!IS_ERR(priv->rx_ch))
> + mbox_free_channel(priv->rx_ch);
> + if (!IS_ERR(priv->rxdb_ch))
> + mbox_free_channel(priv->rxdb_ch);
> +
> + return ret;
> +}
> +
> +static void imx_dsp_rproc_free_mbox(struct imx_dsp_rproc *priv)
> +{
> + mbox_free_channel(priv->tx_ch);
> + mbox_free_channel(priv->rx_ch);
> + mbox_free_channel(priv->rxdb_ch);
> +}
> +
> +static int imx_dsp_rproc_add_carveout(struct imx_dsp_rproc *priv)
> +{
> + const struct imx_dsp_rproc_dcfg *dcfg = priv->dcfg;
> + struct rproc *rproc = priv->rproc;
> + struct device *dev = priv->dev;
> + struct device_node *np = dev->of_node;
> + struct of_phandle_iterator it;
> + struct rproc_mem_entry *mem;
> + struct reserved_mem *rmem;
> + void __iomem *cpu_addr;
> + int a;
> + u64 da;
> +
> + /* remap required addresses */
> + for (a = 0; a < dcfg->att_size; a++) {
> + const struct imx_dsp_rproc_att *att = &dcfg->att[a];
> +
> + if (!(att->flags & ATT_OWN))
> + continue;
> +
> + if (imx_dsp_rproc_sys_to_da(priv, att->sa, att->size, &da))
> + return -EINVAL;
> +
> + cpu_addr = devm_ioremap_wc(dev, att->sa, att->size);
> +
> + /* Register memory region */
> + mem = rproc_mem_entry_init(dev, cpu_addr, (dma_addr_t)att->sa,
> + att->size, da,
> + NULL,
> + NULL,
> + "dsp_mem");
Stacking
> +
> + if (mem)
> + rproc_coredump_add_segment(rproc, da, att->size);
> + else
> + return -ENOMEM;
> +
> + rproc_add_carveout(rproc, mem);
> + }
> +
> + of_phandle_iterator_init(&it, np, "memory-region", NULL, 0);
> + while (of_phandle_iterator_next(&it) == 0) {
> + /*
> + * Ignore the first memory region which will be used vdev buffer.
> + * No need to do extra handlings, rproc_add_virtio_dev will handle it.
> + */
> + if (!strcmp(it.node->name, "vdev0buffer"))
> + continue;
> +
> + rmem = of_reserved_mem_lookup(it.node);
> + if (!rmem) {
> + dev_err(dev, "unable to acquire memory-region\n");
> + return -EINVAL;
> + }
> +
> + if (imx_dsp_rproc_sys_to_da(priv, rmem->base, rmem->size, &da))
> + return -EINVAL;
> +
> + cpu_addr = devm_ioremap_wc(dev, rmem->base, rmem->size);
> +
> + /* Register memory region */
> + mem = rproc_mem_entry_init(dev, cpu_addr, (dma_addr_t)rmem->base,
> + rmem->size, da,
> + NULL,
> + NULL,
> + it.node->name);
Stacking
> +
> + if (mem)
> + rproc_coredump_add_segment(rproc, da, rmem->size);
> + else
> + return -ENOMEM;
> +
> + rproc_add_carveout(rproc, mem);
> + }
> +
> + return 0;
> +}
> +
> +/*
> + * imx_dsp_rproc_elf_load_segments() specially check if memsz is zero
> + * or not.
> + */
> +static int imx_dsp_rproc_elf_load_segments(struct rproc *rproc,
> + const struct firmware *fw)
> +{
> + struct device *dev = &rproc->dev;
> + u8 class = fw_elf_get_class(fw);
> + u32 elf_phdr_get_size = elf_size_of_phdr(class);
> + const u8 *elf_data = fw->data;
> + const void *ehdr, *phdr;
> + int i, ret = 0;
> + u16 phnum;
> +
> + ehdr = elf_data;
> + phnum = elf_hdr_get_e_phnum(class, ehdr);
> + phdr = elf_data + elf_hdr_get_e_phoff(class, ehdr);
> +
> + /* go through the available ELF segments */
> + for (i = 0; i < phnum; i++, phdr += elf_phdr_get_size) {
> + u64 da = elf_phdr_get_p_paddr(class, phdr);
> + u64 memsz = elf_phdr_get_p_memsz(class, phdr);
> + u64 filesz = elf_phdr_get_p_filesz(class, phdr);
> + u64 offset = elf_phdr_get_p_offset(class, phdr);
> + u32 type = elf_phdr_get_p_type(class, phdr);
> + void *ptr;
> + bool is_iomem;
> +
> + if (type != PT_LOAD || !memsz)
> + continue;
> +
> + dev_dbg(dev, "phdr: type %d da 0x%llx memsz 0x%llx filesz 0x%llx\n",
> + type, da, memsz, filesz);
> +
> + if (filesz > memsz) {
> + dev_err(dev, "bad phdr filesz 0x%llx memsz 0x%llx\n",
> + filesz, memsz);
> + ret = -EINVAL;
> + break;
> + }
> +
> + if (offset + filesz > fw->size) {
> + dev_err(dev, "truncated fw: need 0x%llx avail 0x%zx\n",
> + offset + filesz, fw->size);
> + ret = -EINVAL;
> + break;
> + }
> +
> + if (!rproc_u64_fit_in_size_t(memsz)) {
> + dev_err(dev, "size (%llx) does not fit in size_t type\n",
> + memsz);
> + ret = -EOVERFLOW;
> + break;
> + }
> +
> + /* grab the kernel address for this device address */
> + ptr = rproc_da_to_va(rproc, da, memsz, &is_iomem);
> + if (!ptr) {
> + dev_err(dev, "bad phdr da 0x%llx mem 0x%llx\n", da,
> + memsz);
> + ret = -EINVAL;
> + break;
> + }
> +
> + /* put the segment where the remote processor expects it */
> + if (filesz)
> + memcpy(ptr, elf_data + offset, filesz);
> +
> + /*
> + * Zero out remaining memory for this segment.
> + *
> + * This isn't strictly required since dma_alloc_coherent already
> + * did this for us. albeit harmless, we may consider removing
> + * this.
> + */
> + if (memsz > filesz)
> + memset(ptr + filesz, 0, memsz - filesz);
> + }
> +
> + return ret;
> +}
> +
> +static int imx_dsp_rproc_prepare(struct rproc *rproc)
> +{
> + struct imx_dsp_rproc *priv = rproc->priv;
> + struct device *dev = priv->dev;
> + struct rproc_mem_entry *carveout;
> + int ret;
> +
> + ret = imx_dsp_rproc_add_carveout(priv);
> + if (ret) {
> + dev_err(dev, "failed on imx_dsp_rproc_add_carveout\n");
> + return ret;
> + }
> +
> + pm_runtime_get_sync(dev);
> +
> + /* clear buffers */
> + list_for_each_entry(carveout, &rproc->carveouts, node) {
> + if (carveout->va)
> + memset(carveout->va, 0, carveout->len);
> + }
> +
> + return 0;
> +}
> +
> +static int imx_dsp_rproc_unprepare(struct rproc *rproc)
> +{
> + struct imx_dsp_rproc *priv = rproc->priv;
> +
> + pm_runtime_put_sync(priv->dev);
> +
> + return 0;
> +}
> +
> +static void imx_dsp_rproc_kick(struct rproc *rproc, int vqid)
> +{
> + struct imx_dsp_rproc *priv = rproc->priv;
> + int err;
> + __u32 mmsg;
> +
> + if (!priv->tx_ch) {
> + dev_err(priv->dev, "No initialized mbox tx channel\n");
> + return;
> + }
> +
> + /*
> + * Send the index of the triggered virtqueue as the mu payload.
> + * Let remote processor know which virtqueue is used.
> + */
> + mmsg = vqid;
> +
> + err = mbox_send_message(priv->tx_ch, (void *)&mmsg);
> + if (err < 0)
> + dev_err(priv->dev, "%s: failed (%d, err:%d)\n",
> + __func__, vqid, err);
> +}
> +
> +static const struct rproc_ops imx_dsp_rproc_ops = {
> + .prepare = imx_dsp_rproc_prepare,
> + .unprepare = imx_dsp_rproc_unprepare,
> + .start = imx_dsp_rproc_start,
> + .stop = imx_dsp_rproc_stop,
> + .kick = imx_dsp_rproc_kick,
> + .load = imx_dsp_rproc_elf_load_segments,
> + .parse_fw = rproc_elf_load_rsc_table,
> + .sanity_check = rproc_elf_sanity_check,
> + .get_boot_addr = rproc_elf_get_boot_addr,
> +};
> +
> +static int imx_dsp_attach_pm_domains(struct imx_dsp_rproc *priv)
> +{
> + struct device *dev = priv->dev;
> + int ret, i;
> +
> + priv->num_domains = of_count_phandle_with_args(dev->of_node,
> + "power-domains",
> + "#power-domain-cells");
> + if (priv->num_domains <= 1)
> + return 0;
> +
> + priv->pd_dev = devm_kmalloc_array(dev, priv->num_domains,
> + sizeof(*priv->pd_dev),
> + GFP_KERNEL);
> + if (!priv->pd_dev)
> + return -ENOMEM;
> +
> + priv->pd_dev_link = devm_kmalloc_array(dev, priv->num_domains,
> + sizeof(*priv->pd_dev_link),
> + GFP_KERNEL);
> + if (!priv->pd_dev_link)
> + return -ENOMEM;
> +
> + for (i = 0; i < priv->num_domains; i++) {
> + priv->pd_dev[i] = dev_pm_domain_attach_by_id(dev, i);
> + if (IS_ERR(priv->pd_dev[i]))
> + return PTR_ERR(priv->pd_dev[i]);
> +
> + priv->pd_dev_link[i] = device_link_add(dev,
> + priv->pd_dev[i],
> + DL_FLAG_STATELESS |
> + DL_FLAG_PM_RUNTIME |
> + DL_FLAG_RPM_ACTIVE);
> + if (IS_ERR(priv->pd_dev_link[i])) {
> + dev_pm_domain_detach(priv->pd_dev[i], false);
> + ret = PTR_ERR(priv->pd_dev_link[i]);
> + goto detach_pm;
> + }
> + }
> +
> + return 0;
> +
> +detach_pm:
> + while (--i >= 0) {
> + device_link_del(priv->pd_dev_link[i]);
> + dev_pm_domain_detach(priv->pd_dev[i], false);
> + }
> +
> + return ret;
> +}
> +
> +static int imx_dsp_detach_pm_domains(struct imx_dsp_rproc *priv)
> +{
> + int i;
> +
> + if (priv->num_domains <= 1)
> + return 0;
> +
> + for (i = 0; i < priv->num_domains; i++) {
> + device_link_del(priv->pd_dev_link[i]);
> + dev_pm_domain_detach(priv->pd_dev[i], false);
> + }
> +
> + return 0;
> +}
> +
> +static int imx_dsp_rproc_detect_mode(struct imx_dsp_rproc *priv)
> +{
> + const struct imx_dsp_rproc_dcfg *dcfg = priv->dcfg;
> + struct device *dev = priv->dev;
> + struct regmap *regmap;
> + int ret = 0;
> +
> + switch (dcfg->method) {
> + case IMX_DSP_SCU_API:
> + ret = imx_scu_get_handle(&priv->ipc_handle);
> + if (ret)
> + return ret;
> + return 0;
> + case IMX_DSP_MMIO:
> + regmap = syscon_regmap_lookup_by_phandle(dev->of_node, "fsl,dsp-ctrl");
> + if (IS_ERR(regmap)) {
> + dev_err(dev, "failed to find syscon\n");
> + return PTR_ERR(regmap);
> + }
> +
> + priv->regmap = regmap;
> + default:
> + break;
Shouldn't it be an error if neither SCU of MMIO methods are specified?
> + }
> +
> + return ret;
> +}
> +
> +static const char *imx_dsp_clks_names[DSP_RPROC_CLK_MAX] = {
> + /* DSP clocks */
> + "dsp_clk1", "dsp_clk2", "dsp_clk3", "dsp_clk4", "dsp_clk5", "dsp_clk6",
> + "dsp_clk7", "dsp_clk8",
> +
> + /* Peripheral clocks */
> + "per_clk1", "per_clk2", "per_clk3", "per_clk4", "per_clk5", "per_clk6",
> + "per_clk7", "per_clk8", "per_clk9", "per_clk10", "per_clk11", "per_clk12",
> + "per_clk13", "per_clk14", "per_clk15", "per_clk16", "per_clk17", "per_clk18",
> +};
> +
> +static int imx_dsp_rproc_clk_get(struct imx_dsp_rproc *priv)
> +{
> + int i;
> +
> + for (i = 0; i < DSP_RPROC_CLK_MAX; i++) {
> + priv->clks[i] = devm_clk_get_optional(priv->dev,
> + imx_dsp_clks_names[i]);
Please use the devm_clk_bulk_xyz() API.
> + if (IS_ERR(priv->clks[i])) {
> + dev_err(priv->dev, "Failed to get clock %s\n",
> + imx_dsp_clks_names[i]);
> + return PTR_ERR(priv->clks[i]);
> + }
> + }
> +
> + return 0;
> +}
> +
> +static int imx_dsp_rproc_clk_enable(struct imx_dsp_rproc *priv)
> +{
> + int i, ret;
> +
> + for (i = 0; i < DSP_RPROC_CLK_MAX; i++) {
> + ret = clk_prepare_enable(priv->clks[i]);
> + if (ret < 0) {
> + dev_err(priv->dev, "Failed to enable clk %s\n",
> + imx_dsp_clks_names[i]);
> + goto err_dsp_clks;
> + }
> + }
> +
> + return 0;
> +
> +err_dsp_clks:
> + while (--i >= 0)
> + clk_disable_unprepare(priv->clks[i]);
> +
> + return ret;
> +}
> +
> +static void imx_dsp_rproc_clk_disable(struct imx_dsp_rproc *priv)
> +{
> + int i;
> +
> + for (i = 0; i < DSP_RPROC_CLK_MAX; i++)
> + clk_disable_unprepare(priv->clks[i]);
> +}
> +
> +static int imx_dsp_rproc_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + const struct imx_dsp_rproc_dcfg *dcfg;
> + struct imx_dsp_rproc *priv;
> + struct rproc *rproc;
> + const char *fw_name;
> + int ret;
> +
> + dcfg = of_device_get_match_data(dev);
> + if (!dcfg)
> + return -ENODEV;
> +
> + ret = rproc_of_parse_firmware(dev, 0, &fw_name);
> + if (ret) {
> + dev_err(dev, "failed to parse firmware-name property, ret = %d\n",
> + ret);
> + return ret;
> + }
> +
> + rproc = rproc_alloc(dev, "imx-dsp-rproc", &imx_dsp_rproc_ops, fw_name,
> + sizeof(*priv));
> + if (!rproc)
> + return -ENOMEM;
> +
> + priv = rproc->priv;
> + priv->rproc = rproc;
> + priv->dcfg = dcfg;
> + priv->dev = dev;
> +
> + dev_set_drvdata(dev, rproc);
> +
> + priv->workqueue = create_workqueue(dev_name(dev));
> + if (!priv->workqueue) {
> + dev_err(dev, "cannot create workqueue\n");
> + ret = -ENOMEM;
> + goto err_wkq;
> + }
> +
> + INIT_WORK(&priv->rproc_work, imx_dsp_rproc_vq_work);
> +
> + ret = imx_dsp_rproc_detect_mode(priv);
> + if (ret) {
> + dev_err(dev, "failed on imx_dsp_rproc_detect_mode\n");
> + goto err_detect;
> + }
> +
> + ret = imx_dsp_attach_pm_domains(priv);
> + if (ret) {
> + dev_err(dev, "failed on imx_dsp_attach_pm_domains\n");
> + goto err_pm;
> + }
> +
> + ret = imx_dsp_rproc_clk_get(priv);
> + if (ret) {
> + dev_err(dev, "failed on imx_dsp_rproc_clk_get\n");
> + goto err_clk_get;
> + }
> +
> + init_completion(&priv->pm_comp);
> + rproc->auto_boot = false;
> + ret = rproc_add(rproc);
> + if (ret) {
> + dev_err(dev, "rproc_add failed\n");
> + goto err_rproc_add;
> + }
> +
> + pm_runtime_enable(dev);
> +
> + return 0;
> +
> +err_rproc_add:
> +err_clk_get:
Name the gotos in relation to what they do rather than where they come from,
something like "detach_domains". That way you don't need multiple goto
statements that clutter the code.
> + imx_dsp_detach_pm_domains(priv);
> +err_pm:
> +err_detect:
Same
> + destroy_workqueue(priv->workqueue);
> +err_wkq:
> + rproc_free(rproc);
> +
> + return ret;
> +}
> +
> +static int imx_dsp_rproc_remove(struct platform_device *pdev)
> +{
> + struct rproc *rproc = platform_get_drvdata(pdev);
> + struct imx_dsp_rproc *priv = rproc->priv;
> +
> + pm_runtime_disable(&pdev->dev);
> + rproc_del(rproc);
> + imx_dsp_detach_pm_domains(priv);
> + destroy_workqueue(priv->workqueue);
> + rproc_free(rproc);
> +
> + return 0;
> +}
> +
> +/* pm runtime */
> +static int imx_dsp_runtime_resume(struct device *dev)
> +{
> + struct rproc *rproc = dev_get_drvdata(dev);
> + struct imx_dsp_rproc *priv = rproc->priv;
> + const struct imx_dsp_rproc_dcfg *dcfg = priv->dcfg;
> + int ret;
> +
> + ret = imx_dsp_rproc_mbox_init(priv);
Why is the mailbox setup and destroyed with every PM cycle? I find an overall
lack of comments makes this driver difficult to review, resulting in having to
spend more time to look at and understand the code. I will have to continue
tomorrow because, well, I ran out of time.
Mathieu
> + if (ret) {
> + dev_err(dev, "failed on imx_dsp_rproc_mbox_init\n");
> + return ret;
> + }
> +
> + ret = imx_dsp_rproc_clk_enable(priv);
> + if (ret) {
> + dev_err(dev, "failed on imx_dsp_rproc_clk_enable\n");
> + return ret;
> + }
> +
> + /* reset DSP if needed */
> + if (dcfg->reset)
> + dcfg->reset(priv);
> +
> + return 0;
> +}
> +
> +static int imx_dsp_runtime_suspend(struct device *dev)
> +{
> + struct rproc *rproc = dev_get_drvdata(dev);
> + struct imx_dsp_rproc *priv = rproc->priv;
> +
> + imx_dsp_rproc_clk_disable(priv);
> +
> + imx_dsp_rproc_free_mbox(priv);
> +
> + return 0;
> +}
> +
> +static void imx_dsp_load_firmware(const struct firmware *fw, void *context)
> +{
> + struct rproc *rproc = context;
> + int ret;
> +
> + /* load the ELF segments to memory */
> + ret = rproc_load_segments(rproc, fw);
> + if (ret)
> + goto out;
> +
> + /* power up the remote processor */
> + ret = rproc->ops->start(rproc);
> + if (ret)
> + goto out;
> +
> + /* same flow as first start */
> + rproc->ops->kick(rproc, 0);
> +
> +out:
> + release_firmware(fw);
> +}
> +
> +static int imx_dsp_suspend(struct device *dev)
> +{
> + struct rproc *rproc = dev_get_drvdata(dev);
> + struct imx_dsp_rproc *priv = rproc->priv;
> + __u32 mmsg = RP_MBOX_SUSPEND_SYSTEM;
> + int ret;
> +
> + if (rproc->state == RPROC_RUNNING) {
> + reinit_completion(&priv->pm_comp);
> +
> + ret = mbox_send_message(priv->tx_ch, (void *)&mmsg);
> + if (ret < 0) {
> + dev_err(dev, "PM mbox_send_message failed: %d\n", ret);
> + return ret;
> + }
> +
> + if (!wait_for_completion_timeout(&priv->pm_comp, msecs_to_jiffies(100)))
> + return -EBUSY;
> + }
> +
> + return pm_runtime_force_suspend(dev);
> +}
> +
> +static int imx_dsp_resume(struct device *dev)
> +{
> + struct rproc *rproc = dev_get_drvdata(dev);
> + int ret = 0;
> +
> + ret = pm_runtime_force_resume(dev);
> + if (ret)
> + return ret;
> +
> + if (rproc->state == RPROC_RUNNING) {
> + /*TODO: load firmware and start */
> + ret = request_firmware_nowait(THIS_MODULE,
> + FW_ACTION_UEVENT,
> + rproc->firmware,
> + dev,
> + GFP_KERNEL,
> + rproc,
> + imx_dsp_load_firmware);
> + if (ret < 0) {
> + dev_err(dev, "load firmware failed: %d\n", ret);
> + goto err;
> + }
> + }
> +
> + return 0;
> +
> +err:
> + pm_runtime_force_suspend(dev);
> +
> + return ret;
> +}
> +
> +static const struct dev_pm_ops imx_dsp_rproc_pm_ops = {
> + SET_SYSTEM_SLEEP_PM_OPS(imx_dsp_suspend, imx_dsp_resume)
> + SET_RUNTIME_PM_OPS(imx_dsp_runtime_suspend,
> + imx_dsp_runtime_resume, NULL)
> +};
> +
> +static const struct of_device_id imx_dsp_rproc_of_match[] = {
> + { .compatible = "fsl,imx8qxp-hifi4", .data = &imx_dsp_rproc_cfg_imx8qxp },
> + { .compatible = "fsl,imx8qm-hifi4", .data = &imx_dsp_rproc_cfg_imx8qm },
> + { .compatible = "fsl,imx8mp-hifi4", .data = &imx_dsp_rproc_cfg_imx8mp },
> + { .compatible = "fsl,imx8ulp-hifi4", .data = &imx_dsp_rproc_cfg_imx8ulp },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, imx_dsp_rproc_of_match);
> +
> +static struct platform_driver imx_dsp_rproc_driver = {
> + .probe = imx_dsp_rproc_probe,
> + .remove = imx_dsp_rproc_remove,
> + .driver = {
> + .name = "imx-dsp-rproc",
> + .of_match_table = imx_dsp_rproc_of_match,
> + .pm = &imx_dsp_rproc_pm_ops,
> + },
> +};
> +module_platform_driver(imx_dsp_rproc_driver);
> +
> +MODULE_LICENSE("GPL v2");
> +MODULE_DESCRIPTION("i.MX HiFi Core Remote Processor Control Driver");
> +MODULE_AUTHOR("Shengjiu Wang <[email protected]>");
> --
> 2.17.1
>
Hi Mathieu
Thanks for reviewing!
On Wed, Sep 1, 2021 at 2:02 AM Mathieu Poirier
<[email protected]> wrote:
>
> Hi Shengjiu,
>
> On Wed, Aug 25, 2021 at 03:28:36PM +0800, Shengjiu Wang wrote:
> > Provide a basic driver to control DSP processor found on NXP i.MX8QM,
> > i.MX8QXP, i.MX8MP and i.MX8ULP.
> >
> > Currently it is able to resolve addresses between DSP and main CPU,
> > start and stop the processor, suspend and resume.
> >
> > The communication between DSP and main CPU is based on mailbox, there
> > are three mailbox channels (tx, rx, rxdb).
> >
> > This driver was tested on NXP i.MX8QM, i.MX8QXP, i.MX8MP and i.MX8ULP.
> >
> > Signed-off-by: Shengjiu Wang <[email protected]>
> > ---
> > changes in v2:
> > - change syscon to fsl,dsp-ctrl
> >
> > drivers/remoteproc/Kconfig | 11 +
> > drivers/remoteproc/Makefile | 1 +
> > drivers/remoteproc/imx_dsp_rproc.c | 1078 ++++++++++++++++++++++++++++
> > 3 files changed, 1090 insertions(+)
> > create mode 100644 drivers/remoteproc/imx_dsp_rproc.c
> >
> > diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig
> > index 9a6eedc3994a..890a14e6f3f9 100644
> > --- a/drivers/remoteproc/Kconfig
> > +++ b/drivers/remoteproc/Kconfig
> > @@ -34,6 +34,17 @@ config IMX_REMOTEPROC
> >
> > It's safe to say N here.
> >
> > +config IMX_DSP_REMOTEPROC
> > + tristate "i.MX DSP remoteproc support"
> > + depends on ARCH_MXC
> > + depends on HAVE_ARM_SMCCC
> > + select MAILBOX
> > + help
> > + Say y here to support iMX's DSP remote processors via the remote
> > + processor framework.
> > +
> > + It's safe to say N here.
> > +
> > config INGENIC_VPU_RPROC
> > tristate "Ingenic JZ47xx VPU remoteproc support"
> > depends on MIPS || COMPILE_TEST
> > diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile
> > index bb26c9e4ef9c..37d5cb1c04bf 100644
> > --- a/drivers/remoteproc/Makefile
> > +++ b/drivers/remoteproc/Makefile
> > @@ -12,6 +12,7 @@ remoteproc-y += remoteproc_virtio.o
> > remoteproc-y += remoteproc_elf_loader.o
> > obj-$(CONFIG_REMOTEPROC_CDEV) += remoteproc_cdev.o
> > obj-$(CONFIG_IMX_REMOTEPROC) += imx_rproc.o
> > +obj-$(CONFIG_IMX_DSP_REMOTEPROC) += imx_dsp_rproc.o
> > obj-$(CONFIG_INGENIC_VPU_RPROC) += ingenic_rproc.o
> > obj-$(CONFIG_MTK_SCP) += mtk_scp.o mtk_scp_ipi.o
> > obj-$(CONFIG_OMAP_REMOTEPROC) += omap_remoteproc.o
> > diff --git a/drivers/remoteproc/imx_dsp_rproc.c b/drivers/remoteproc/imx_dsp_rproc.c
> > new file mode 100644
> > index 000000000000..ce0596694122
> > --- /dev/null
> > +++ b/drivers/remoteproc/imx_dsp_rproc.c
> > @@ -0,0 +1,1078 @@
> > +// SPDX-License-Identifier: GPL-2.0-only
> > +// Copyright 2021 NXP
> > +
> > +#include <linux/clk.h>
> > +#include <linux/err.h>
> > +#include <linux/interrupt.h>
> > +#include <linux/kernel.h>
> > +#include <linux/mailbox_client.h>
> > +#include <linux/mfd/syscon.h>
> > +#include <linux/module.h>
> > +#include <linux/of_address.h>
> > +#include <linux/of_reserved_mem.h>
> > +#include <linux/of_device.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/pm_domain.h>
> > +#include <linux/regmap.h>
> > +#include <linux/remoteproc.h>
> > +#include <linux/slab.h>
> > +#include <linux/pm_runtime.h>
>
> Alphabetical order
I will update the order in next version.
>
> > +#include <linux/workqueue.h>
> > +#include <linux/firmware/imx/sci.h>
>
> Same
I will update the order in next version.
>
> > +#include <dt-bindings/firmware/imx/rsrc.h>
> > +#include <linux/arm-smccc.h>
>
> Same
I will update the order in next version.
>
> > +
> > +#include "remoteproc_internal.h"
> > +#include "remoteproc_elf_helpers.h"
>
> Same
I will update the order in next version.
>
> > +
> > +enum imx_dsp_rp_mbox_messages {
> > + RP_MBOX_SUSPEND_SYSTEM = 0xFF11,
> > + RP_MBOX_SUSPEND_ACK = 0xFF12,
> > + RP_MBOX_RESUME_SYSTEM = 0xFF13,
> > + RP_MBOX_RESUME_ACK = 0xFF14,
> > +};
> > +
> > +#define DSP_RPROC_CLK_MAX 32
> > +
> > +#define REMOTE_IS_READY BIT(0)
> > +#define REMOTE_READY_WAIT_MAX_RETRIES 500
> > +
> > +/* att flags */
> > +/* DSP own area. Can be mapped at probe */
> > +#define ATT_OWN BIT(31)
> > +#define ATT_IRAM BIT(30)
> > +
> > +/* i.MX8MP */
> > +/* DAP registers */
> > +#define IMX8M_DAP_DEBUG 0x28800000
> > +#define IMX8M_DAP_DEBUG_SIZE (64 * 1024)
> > +#define IMX8M_DAP_PWRCTL (0x4000 + 0x3020)
> > +#define IMX8M_PWRCTL_CORERESET BIT(16)
> > +
> > +/* DSP audio mix registers */
> > +#define IMX8M_AudioDSP_REG0 0x100
> > +#define IMX8M_AudioDSP_REG1 0x104
> > +#define IMX8M_AudioDSP_REG2 0x108
> > +#define IMX8M_AudioDSP_REG3 0x10c
> > +
> > +#define IMX8M_AudioDSP_REG2_RUNSTALL BIT(5)
> > +#define IMX8M_AudioDSP_REG2_PWAITMODE BIT(1)
> > +
> > +/* i.MX8ULP */
> > +#define IMX8ULP_SIM_LPAV_REG_SYSCTRL0 0x8
> > +#define IMX8ULP_SYSCTRL0_DSP_DBG_RST BIT(25)
> > +#define IMX8ULP_SYSCTRL0_DSP_PLAT_CLK_EN BIT(19)
> > +#define IMX8ULP_SYSCTRL0_DSP_PBCLK_EN BIT(18)
> > +#define IMX8ULP_SYSCTRL0_DSP_CLK_EN BIT(17)
> > +#define IMX8ULP_SYSCTRL0_DSP_RST BIT(16)
> > +#define IMX8ULP_SYSCTRL0_DSP_OCD_HALT BIT(14)
> > +#define IMX8ULP_SYSCTRL0_DSP_STALL BIT(13)
> > +
> > +#define IMX8ULP_SIP_HIFI_XRDC 0xc200000e
>
> For all of the above defines, either align them all or not at all.
I will update the alignment in next version.
>
> > +
> > +/* address translation table */
> > +struct imx_dsp_rproc_att {
> > + u32 da; /* device address (From Cortex M4 view)*/
> > + u32 sa; /* system bus address */
> > + u32 size; /* size of reg range */
> > + int flags;
> > +};
>
> This is already defined in imx_rproc.c - why do we need another definition here?
I just want to avoid to modify imx_rproc.c driver.
So with this comments, should I add imx_rproc.h for extracting the common
structure in it?
>
> > +
> > +/* Remote core start/stop method */
> > +enum imx_dsp_rproc_method {
> > + /* Through syscon regmap */
> > + IMX_DSP_MMIO,
> > + IMX_DSP_SCU_API,
> > +};
>
> From where I stand it would be worth merging the above with imx_rproc_method
> found in imx_rproc.c. I don't see a need for duplication.
Should I add imx_rproc.h for extracting the common structure in it?
>
> > +
> > +struct imx_dsp_rproc {
> > + struct device *dev;
> > + struct regmap *regmap;
> > + struct rproc *rproc;
> > + const struct imx_dsp_rproc_dcfg *dcfg;
> > + struct clk *clks[DSP_RPROC_CLK_MAX];
> > + struct mbox_client cl;
> > + struct mbox_client cl_rxdb;
> > + struct mbox_chan *tx_ch;
> > + struct mbox_chan *rx_ch;
> > + struct mbox_chan *rxdb_ch;
> > + struct device **pd_dev;
> > + struct device_link **pd_dev_link;
> > + struct imx_sc_ipc *ipc_handle;
> > + struct work_struct rproc_work;
> > + struct workqueue_struct *workqueue;
> > + struct completion pm_comp;
> > + spinlock_t mbox_lock; /* lock for mbox */
> > + int num_domains;
> > + u32 flags;
> > +};
> > +
> > +struct imx_dsp_rproc_dcfg {
> > + u32 src_reg;
> > + u32 src_mask;
> > + u32 src_start;
> > + u32 src_stop;
> > + const struct imx_dsp_rproc_att *att;
> > + size_t att_size;
> > + enum imx_dsp_rproc_method method;
>
> The above is similar to imx_rproc_cfg. As such:
>
> struct imx_dsp_rproc_dcfg {
> struct imx_rproc_cfg *dcfg;
> int (*reset)(struct imx_dsp_rproc *priv);
> };
>
Yes, seems need to add imx_rproc.h header file.
> > + int (*reset)(struct imx_dsp_rproc *priv);
> > +};
> > +
> > +static const struct imx_dsp_rproc_att imx_dsp_rproc_att_imx8qm[] = {
> > + /* dev addr , sys addr , size , flags */
> > + { 0x596e8000, 0x556e8000, 0x00008000, ATT_OWN },
> > + { 0x596f0000, 0x556f0000, 0x00008000, ATT_OWN },
> > + { 0x596f8000, 0x556f8000, 0x00000800, ATT_OWN | ATT_IRAM},
> > + { 0x55700000, 0x55700000, 0x00070000, ATT_OWN },
> > + /* DDR (Data) */
> > + { 0x80000000, 0x80000000, 0x60000000, 0},
> > +};
> > +
> > +static const struct imx_dsp_rproc_att imx_dsp_rproc_att_imx8qxp[] = {
> > + /* dev addr , sys addr , size , flags */
> > + { 0x596e8000, 0x596e8000, 0x00008000, ATT_OWN },
> > + { 0x596f0000, 0x596f0000, 0x00008000, ATT_OWN },
> > + { 0x596f8000, 0x596f8000, 0x00000800, ATT_OWN | ATT_IRAM},
> > + { 0x59700000, 0x59700000, 0x00070000, ATT_OWN },
> > + /* DDR (Data) */
> > + { 0x80000000, 0x80000000, 0x60000000, 0},
> > +};
> > +
> > +static const struct imx_dsp_rproc_att imx_dsp_rproc_att_imx8mp[] = {
> > + /* dev addr , sys addr , size , flags */
> > + { 0x3b6e8000, 0x3b6e8000, 0x00008000, ATT_OWN },
> > + { 0x3b6f0000, 0x3b6f0000, 0x00008000, ATT_OWN },
> > + { 0x3b6f8000, 0x3b6f8000, 0x00000800, ATT_OWN | ATT_IRAM},
> > + { 0x3b700000, 0x3b700000, 0x00040000, ATT_OWN },
> > + /* DDR (Data) */
> > + { 0x40000000, 0x40000000, 0x80000000, 0},
> > +};
> > +
> > +static const struct imx_dsp_rproc_att imx_dsp_rproc_att_imx8ulp[] = {
> > + /* dev addr , sys addr , size , flags */
> > + { 0x21170000, 0x21170000, 0x00010000, ATT_OWN | ATT_IRAM},
> > + { 0x21180000, 0x21180000, 0x00010000, ATT_OWN },
> > + /* DDR (Data) */
> > + { 0x0c000000, 0x80000000, 0x10000000, 0},
> > + { 0x30000000, 0x90000000, 0x10000000, 0},
> > +};
> > +
> > +static int imx8mp_dsp_reset(struct imx_dsp_rproc *priv)
> > +{
> > + void __iomem *dap = ioremap_wc(IMX8M_DAP_DEBUG, IMX8M_DAP_DEBUG_SIZE);
> > + int pwrctl;
> > +
> > + /* put DSP into reset and stall */
> > + pwrctl = readl(dap + IMX8M_DAP_PWRCTL);
> > + pwrctl |= IMX8M_PWRCTL_CORERESET;
> > + writel(pwrctl, dap + IMX8M_DAP_PWRCTL);
> > +
> > + /* keep reset asserted for 10 cycles */
> > + usleep_range(1, 2);
> > +
> > + regmap_update_bits(priv->regmap, IMX8M_AudioDSP_REG2,
> > + IMX8M_AudioDSP_REG2_RUNSTALL,
> > + IMX8M_AudioDSP_REG2_RUNSTALL);
> > +
> > + /* take the DSP out of reset and keep stalled for FW loading */
> > + pwrctl = readl(dap + IMX8M_DAP_PWRCTL);
> > + pwrctl &= ~IMX8M_PWRCTL_CORERESET;
> > + writel(pwrctl, dap + IMX8M_DAP_PWRCTL);
> > +
> > + iounmap(dap);
> > + return 0;
> > +}
> > +
> > +static int imx8ulp_dsp_reset(struct imx_dsp_rproc *priv)
> > +{
> > + struct arm_smccc_res res;
> > +
> > + regmap_update_bits(priv->regmap, IMX8ULP_SIM_LPAV_REG_SYSCTRL0,
> > + IMX8ULP_SYSCTRL0_DSP_RST, IMX8ULP_SYSCTRL0_DSP_RST);
> > + regmap_update_bits(priv->regmap, IMX8ULP_SIM_LPAV_REG_SYSCTRL0,
> > + IMX8ULP_SYSCTRL0_DSP_STALL,
> > + IMX8ULP_SYSCTRL0_DSP_STALL);
> > +
> > + arm_smccc_smc(IMX8ULP_SIP_HIFI_XRDC, 0, 0, 0, 0, 0, 0, 0, &res);
> > +
> > + regmap_update_bits(priv->regmap, IMX8ULP_SIM_LPAV_REG_SYSCTRL0,
> > + IMX8ULP_SYSCTRL0_DSP_RST, 0);
> > + regmap_update_bits(priv->regmap, IMX8ULP_SIM_LPAV_REG_SYSCTRL0,
> > + IMX8ULP_SYSCTRL0_DSP_DBG_RST, 0);
> > +
> > + return 0;
> > +}
> > +
> > +static const struct imx_dsp_rproc_dcfg imx_dsp_rproc_cfg_imx8mp = {
> > + .src_reg = IMX8M_AudioDSP_REG2,
> > + .src_mask = IMX8M_AudioDSP_REG2_RUNSTALL,
> > + .src_start = 0,
> > + .src_stop = IMX8M_AudioDSP_REG2_RUNSTALL,
> > + .att = imx_dsp_rproc_att_imx8mp,
> > + .att_size = ARRAY_SIZE(imx_dsp_rproc_att_imx8mp),
> > + .method = IMX_DSP_MMIO,
> > + .reset = imx8mp_dsp_reset,
> > +};
> > +
> > +static const struct imx_dsp_rproc_dcfg imx_dsp_rproc_cfg_imx8ulp = {
> > + .src_reg = IMX8ULP_SIM_LPAV_REG_SYSCTRL0,
> > + .src_mask = IMX8ULP_SYSCTRL0_DSP_STALL,
> > + .src_start = 0,
> > + .src_stop = IMX8ULP_SYSCTRL0_DSP_STALL,
> > + .att = imx_dsp_rproc_att_imx8ulp,
> > + .att_size = ARRAY_SIZE(imx_dsp_rproc_att_imx8ulp),
> > + .method = IMX_DSP_MMIO,
> > + .reset = imx8ulp_dsp_reset,
> > +};
> > +
> > +static const struct imx_dsp_rproc_dcfg imx_dsp_rproc_cfg_imx8qxp = {
> > + .att = imx_dsp_rproc_att_imx8qxp,
> > + .att_size = ARRAY_SIZE(imx_dsp_rproc_att_imx8qxp),
> > + .method = IMX_DSP_SCU_API,
> > +};
> > +
> > +static const struct imx_dsp_rproc_dcfg imx_dsp_rproc_cfg_imx8qm = {
> > + .att = imx_dsp_rproc_att_imx8qm,
> > + .att_size = ARRAY_SIZE(imx_dsp_rproc_att_imx8qm),
> > + .method = IMX_DSP_SCU_API,
> > +};
> > +
> > +static int imx_dsp_rproc_ready(struct rproc *rproc)
> > +{
> > + struct imx_dsp_rproc *priv = rproc->priv;
> > + int i;
> > +
> > + if (!priv->rxdb_ch)
> > + return 0;
> > +
> > + for (i = 0; i < REMOTE_READY_WAIT_MAX_RETRIES; i++) {
> > + if (priv->flags & REMOTE_IS_READY)
> > + return 0;
> > + usleep_range(100, 200);
> > + }
> > +
> > + return -ETIMEDOUT;
> > +}
> > +
> > +static int imx_dsp_rproc_start(struct rproc *rproc)
> > +{
> > + struct imx_dsp_rproc *priv = rproc->priv;
> > + const struct imx_dsp_rproc_dcfg *dcfg = priv->dcfg;
> > + struct device *dev = priv->dev;
> > + int ret;
> > +
> > + switch (dcfg->method) {
> > + case IMX_DSP_MMIO:
> > + ret = regmap_update_bits(priv->regmap,
> > + dcfg->src_reg,
> > + dcfg->src_mask,
> > + dcfg->src_start);
> > + break;
> > + case IMX_DSP_SCU_API:
> > + ret = imx_sc_pm_cpu_start(priv->ipc_handle,
> > + IMX_SC_R_DSP,
> > + true,
> > + rproc->bootaddr);
> > + break;
> > + default:
> > + return -EOPNOTSUPP;
> > + }
> > +
> > + if (ret)
> > + dev_err(dev, "Failed to enable remote core!\n");
> > + else
> > + ret = imx_dsp_rproc_ready(rproc);
> > +
> > + return ret;
> > +}
> > +
> > +static int imx_dsp_rproc_stop(struct rproc *rproc)
> > +{
> > + struct imx_dsp_rproc *priv = rproc->priv;
> > + const struct imx_dsp_rproc_dcfg *dcfg = priv->dcfg;
> > + struct device *dev = priv->dev;
> > + int ret = 0;
> > +
> > + if (rproc->state == RPROC_CRASHED) {
> > + priv->flags &= ~REMOTE_IS_READY;
> > + return 0;
> > + }
> > +
> > + switch (dcfg->method) {
> > + case IMX_DSP_MMIO:
> > + ret = regmap_update_bits(priv->regmap, dcfg->src_reg, dcfg->src_mask,
> > + dcfg->src_stop);
> > + break;
> > + case IMX_DSP_SCU_API:
> > + ret = imx_sc_pm_cpu_start(priv->ipc_handle,
> > + IMX_SC_R_DSP,
> > + false,
> > + rproc->bootaddr);
> > + break;
> > + default:
> > + return -EOPNOTSUPP;
> > + }
> > +
> > + if (ret)
> > + dev_err(dev, "Failed to stop remote core\n");
> > + else
> > + priv->flags &= ~REMOTE_IS_READY;
> > +
> > + return ret;
> > +}
> > +
> > +static int imx_dsp_rproc_sys_to_da(struct imx_dsp_rproc *priv, u64 sys,
> > + size_t len, u64 *da)
> > +{
> > + const struct imx_dsp_rproc_dcfg *dcfg = priv->dcfg;
> > + int i;
> > +
> > + /* parse address translation table */
> > + for (i = 0; i < dcfg->att_size; i++) {
> > + const struct imx_dsp_rproc_att *att = &dcfg->att[i];
> > +
> > + if (sys >= att->sa && sys + len <= att->sa + att->size) {
> > + unsigned int offset = sys - att->sa;
> > +
> > + *da = att->da + offset;
> > + return 0;
> > + }
> > + }
> > +
> > + return -ENOENT;
> > +}
> > +
> > +static void imx_dsp_rproc_vq_work(struct work_struct *work)
> > +{
> > + struct imx_dsp_rproc *priv = container_of(work, struct imx_dsp_rproc,
> > + rproc_work);
> > +
> > + rproc_vq_interrupt(priv->rproc, 0);
> > + rproc_vq_interrupt(priv->rproc, 1);
> > +}
> > +
> > +static void imx_dsp_rproc_rx_callback(struct mbox_client *cl, void *data)
> > +{
> > + struct rproc *rproc = dev_get_drvdata(cl->dev);
> > + struct imx_dsp_rproc *priv = rproc->priv;
> > + u32 message = (u32)(*(u32 *)data);
> > +
> > + dev_dbg(priv->dev, "mbox msg: 0x%x\n", message);
> > +
> > + switch (message) {
> > + case RP_MBOX_SUSPEND_ACK:
> > + complete(&priv->pm_comp);
> > + break;
> > + case RP_MBOX_RESUME_ACK:
> > + complete(&priv->pm_comp);
> > + break;
> > + default:
> > + queue_work(priv->workqueue, &priv->rproc_work);
> > + break;
> > + }
> > +}
> > +
> > +static void imx_dsp_rproc_rxdb_callback(struct mbox_client *cl, void *msg)
> > +{
> > + struct rproc *rproc = dev_get_drvdata(cl->dev);
> > + struct imx_dsp_rproc *priv = rproc->priv;
> > + unsigned long flags;
> > +
> > + spin_lock_irqsave(&priv->mbox_lock, flags);
> > + priv->flags |= REMOTE_IS_READY;
> > + spin_unlock_irqrestore(&priv->mbox_lock, flags);
> > +}
> > +
> > +static int imx_dsp_rproc_mbox_init(struct imx_dsp_rproc *priv)
> > +{
> > + struct device *dev = priv->dev;
> > + struct mbox_client *cl;
> > + int ret;
> > +
> > + if (!of_get_property(dev->of_node, "mbox-names", NULL))
> > + return 0;
> > +
> > + spin_lock_init(&priv->mbox_lock);
> > +
> > + cl = &priv->cl;
> > + cl->dev = dev;
> > + cl->tx_block = true;
> > + cl->tx_tout = 100;
> > + cl->knows_txdone = false;
> > + cl->rx_callback = imx_dsp_rproc_rx_callback;
> > +
> > + priv->tx_ch = mbox_request_channel_byname(cl, "tx");
> > + if (IS_ERR(priv->tx_ch)) {
> > + ret = PTR_ERR(priv->tx_ch);
> > + dev_dbg(cl->dev, "failed to request tx mailbox channel: %d\n",
> > + ret);
> > + goto err_out;
> > + }
> > +
> > + priv->rx_ch = mbox_request_channel_byname(cl, "rx");
> > + if (IS_ERR(priv->rx_ch)) {
> > + ret = PTR_ERR(priv->rx_ch);
> > + dev_dbg(cl->dev, "failed to request rx mailbox channel: %d\n",
> > + ret);
> > + goto err_out;
> > + }
> > +
> > + cl = &priv->cl_rxdb;
> > + cl->dev = dev;
> > + cl->rx_callback = imx_dsp_rproc_rxdb_callback;
> > +
> > + /*
> > + * RX door bell is used to receive the ready signal from remote
> > + * after the partition reset of A core.
> > + */
> > + priv->rxdb_ch = mbox_request_channel_byname(cl, "rxdb");
> > + if (IS_ERR(priv->rxdb_ch)) {
> > + ret = PTR_ERR(priv->rxdb_ch);
> > + dev_dbg(cl->dev, "failed to request mbox chan rxdb, ret %d\n",
> > + ret);
> > + goto err_out;
> > + }
> > +
> > + return 0;
> > +
> > +err_out:
> > + if (!IS_ERR(priv->tx_ch))
> > + mbox_free_channel(priv->tx_ch);
> > + if (!IS_ERR(priv->rx_ch))
> > + mbox_free_channel(priv->rx_ch);
> > + if (!IS_ERR(priv->rxdb_ch))
> > + mbox_free_channel(priv->rxdb_ch);
> > +
> > + return ret;
> > +}
> > +
> > +static void imx_dsp_rproc_free_mbox(struct imx_dsp_rproc *priv)
> > +{
> > + mbox_free_channel(priv->tx_ch);
> > + mbox_free_channel(priv->rx_ch);
> > + mbox_free_channel(priv->rxdb_ch);
> > +}
> > +
> > +static int imx_dsp_rproc_add_carveout(struct imx_dsp_rproc *priv)
> > +{
> > + const struct imx_dsp_rproc_dcfg *dcfg = priv->dcfg;
> > + struct rproc *rproc = priv->rproc;
> > + struct device *dev = priv->dev;
> > + struct device_node *np = dev->of_node;
> > + struct of_phandle_iterator it;
> > + struct rproc_mem_entry *mem;
> > + struct reserved_mem *rmem;
> > + void __iomem *cpu_addr;
> > + int a;
> > + u64 da;
> > +
> > + /* remap required addresses */
> > + for (a = 0; a < dcfg->att_size; a++) {
> > + const struct imx_dsp_rproc_att *att = &dcfg->att[a];
> > +
> > + if (!(att->flags & ATT_OWN))
> > + continue;
> > +
> > + if (imx_dsp_rproc_sys_to_da(priv, att->sa, att->size, &da))
> > + return -EINVAL;
> > +
> > + cpu_addr = devm_ioremap_wc(dev, att->sa, att->size);
> > +
> > + /* Register memory region */
> > + mem = rproc_mem_entry_init(dev, cpu_addr, (dma_addr_t)att->sa,
> > + att->size, da,
> > + NULL,
> > + NULL,
> > + "dsp_mem");
>
> Stacking
I will update it in next version.
>
> > +
> > + if (mem)
> > + rproc_coredump_add_segment(rproc, da, att->size);
> > + else
> > + return -ENOMEM;
> > +
> > + rproc_add_carveout(rproc, mem);
> > + }
> > +
> > + of_phandle_iterator_init(&it, np, "memory-region", NULL, 0);
> > + while (of_phandle_iterator_next(&it) == 0) {
> > + /*
> > + * Ignore the first memory region which will be used vdev buffer.
> > + * No need to do extra handlings, rproc_add_virtio_dev will handle it.
> > + */
> > + if (!strcmp(it.node->name, "vdev0buffer"))
> > + continue;
> > +
> > + rmem = of_reserved_mem_lookup(it.node);
> > + if (!rmem) {
> > + dev_err(dev, "unable to acquire memory-region\n");
> > + return -EINVAL;
> > + }
> > +
> > + if (imx_dsp_rproc_sys_to_da(priv, rmem->base, rmem->size, &da))
> > + return -EINVAL;
> > +
> > + cpu_addr = devm_ioremap_wc(dev, rmem->base, rmem->size);
> > +
> > + /* Register memory region */
> > + mem = rproc_mem_entry_init(dev, cpu_addr, (dma_addr_t)rmem->base,
> > + rmem->size, da,
> > + NULL,
> > + NULL,
> > + it.node->name);
>
> Stacking
I will update it in next version.
>
> > +
> > + if (mem)
> > + rproc_coredump_add_segment(rproc, da, rmem->size);
> > + else
> > + return -ENOMEM;
> > +
> > + rproc_add_carveout(rproc, mem);
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +/*
> > + * imx_dsp_rproc_elf_load_segments() specially check if memsz is zero
> > + * or not.
> > + */
> > +static int imx_dsp_rproc_elf_load_segments(struct rproc *rproc,
> > + const struct firmware *fw)
> > +{
> > + struct device *dev = &rproc->dev;
> > + u8 class = fw_elf_get_class(fw);
> > + u32 elf_phdr_get_size = elf_size_of_phdr(class);
> > + const u8 *elf_data = fw->data;
> > + const void *ehdr, *phdr;
> > + int i, ret = 0;
> > + u16 phnum;
> > +
> > + ehdr = elf_data;
> > + phnum = elf_hdr_get_e_phnum(class, ehdr);
> > + phdr = elf_data + elf_hdr_get_e_phoff(class, ehdr);
> > +
> > + /* go through the available ELF segments */
> > + for (i = 0; i < phnum; i++, phdr += elf_phdr_get_size) {
> > + u64 da = elf_phdr_get_p_paddr(class, phdr);
> > + u64 memsz = elf_phdr_get_p_memsz(class, phdr);
> > + u64 filesz = elf_phdr_get_p_filesz(class, phdr);
> > + u64 offset = elf_phdr_get_p_offset(class, phdr);
> > + u32 type = elf_phdr_get_p_type(class, phdr);
> > + void *ptr;
> > + bool is_iomem;
> > +
> > + if (type != PT_LOAD || !memsz)
> > + continue;
> > +
> > + dev_dbg(dev, "phdr: type %d da 0x%llx memsz 0x%llx filesz 0x%llx\n",
> > + type, da, memsz, filesz);
> > +
> > + if (filesz > memsz) {
> > + dev_err(dev, "bad phdr filesz 0x%llx memsz 0x%llx\n",
> > + filesz, memsz);
> > + ret = -EINVAL;
> > + break;
> > + }
> > +
> > + if (offset + filesz > fw->size) {
> > + dev_err(dev, "truncated fw: need 0x%llx avail 0x%zx\n",
> > + offset + filesz, fw->size);
> > + ret = -EINVAL;
> > + break;
> > + }
> > +
> > + if (!rproc_u64_fit_in_size_t(memsz)) {
> > + dev_err(dev, "size (%llx) does not fit in size_t type\n",
> > + memsz);
> > + ret = -EOVERFLOW;
> > + break;
> > + }
> > +
> > + /* grab the kernel address for this device address */
> > + ptr = rproc_da_to_va(rproc, da, memsz, &is_iomem);
> > + if (!ptr) {
> > + dev_err(dev, "bad phdr da 0x%llx mem 0x%llx\n", da,
> > + memsz);
> > + ret = -EINVAL;
> > + break;
> > + }
> > +
> > + /* put the segment where the remote processor expects it */
> > + if (filesz)
> > + memcpy(ptr, elf_data + offset, filesz);
> > +
> > + /*
> > + * Zero out remaining memory for this segment.
> > + *
> > + * This isn't strictly required since dma_alloc_coherent already
> > + * did this for us. albeit harmless, we may consider removing
> > + * this.
> > + */
> > + if (memsz > filesz)
> > + memset(ptr + filesz, 0, memsz - filesz);
> > + }
> > +
> > + return ret;
> > +}
> > +
> > +static int imx_dsp_rproc_prepare(struct rproc *rproc)
> > +{
> > + struct imx_dsp_rproc *priv = rproc->priv;
> > + struct device *dev = priv->dev;
> > + struct rproc_mem_entry *carveout;
> > + int ret;
> > +
> > + ret = imx_dsp_rproc_add_carveout(priv);
> > + if (ret) {
> > + dev_err(dev, "failed on imx_dsp_rproc_add_carveout\n");
> > + return ret;
> > + }
> > +
> > + pm_runtime_get_sync(dev);
> > +
> > + /* clear buffers */
> > + list_for_each_entry(carveout, &rproc->carveouts, node) {
> > + if (carveout->va)
> > + memset(carveout->va, 0, carveout->len);
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int imx_dsp_rproc_unprepare(struct rproc *rproc)
> > +{
> > + struct imx_dsp_rproc *priv = rproc->priv;
> > +
> > + pm_runtime_put_sync(priv->dev);
> > +
> > + return 0;
> > +}
> > +
> > +static void imx_dsp_rproc_kick(struct rproc *rproc, int vqid)
> > +{
> > + struct imx_dsp_rproc *priv = rproc->priv;
> > + int err;
> > + __u32 mmsg;
> > +
> > + if (!priv->tx_ch) {
> > + dev_err(priv->dev, "No initialized mbox tx channel\n");
> > + return;
> > + }
> > +
> > + /*
> > + * Send the index of the triggered virtqueue as the mu payload.
> > + * Let remote processor know which virtqueue is used.
> > + */
> > + mmsg = vqid;
> > +
> > + err = mbox_send_message(priv->tx_ch, (void *)&mmsg);
> > + if (err < 0)
> > + dev_err(priv->dev, "%s: failed (%d, err:%d)\n",
> > + __func__, vqid, err);
> > +}
> > +
> > +static const struct rproc_ops imx_dsp_rproc_ops = {
> > + .prepare = imx_dsp_rproc_prepare,
> > + .unprepare = imx_dsp_rproc_unprepare,
> > + .start = imx_dsp_rproc_start,
> > + .stop = imx_dsp_rproc_stop,
> > + .kick = imx_dsp_rproc_kick,
> > + .load = imx_dsp_rproc_elf_load_segments,
> > + .parse_fw = rproc_elf_load_rsc_table,
> > + .sanity_check = rproc_elf_sanity_check,
> > + .get_boot_addr = rproc_elf_get_boot_addr,
> > +};
> > +
> > +static int imx_dsp_attach_pm_domains(struct imx_dsp_rproc *priv)
> > +{
> > + struct device *dev = priv->dev;
> > + int ret, i;
> > +
> > + priv->num_domains = of_count_phandle_with_args(dev->of_node,
> > + "power-domains",
> > + "#power-domain-cells");
> > + if (priv->num_domains <= 1)
> > + return 0;
> > +
> > + priv->pd_dev = devm_kmalloc_array(dev, priv->num_domains,
> > + sizeof(*priv->pd_dev),
> > + GFP_KERNEL);
> > + if (!priv->pd_dev)
> > + return -ENOMEM;
> > +
> > + priv->pd_dev_link = devm_kmalloc_array(dev, priv->num_domains,
> > + sizeof(*priv->pd_dev_link),
> > + GFP_KERNEL);
> > + if (!priv->pd_dev_link)
> > + return -ENOMEM;
> > +
> > + for (i = 0; i < priv->num_domains; i++) {
> > + priv->pd_dev[i] = dev_pm_domain_attach_by_id(dev, i);
> > + if (IS_ERR(priv->pd_dev[i]))
> > + return PTR_ERR(priv->pd_dev[i]);
> > +
> > + priv->pd_dev_link[i] = device_link_add(dev,
> > + priv->pd_dev[i],
> > + DL_FLAG_STATELESS |
> > + DL_FLAG_PM_RUNTIME |
> > + DL_FLAG_RPM_ACTIVE);
> > + if (IS_ERR(priv->pd_dev_link[i])) {
> > + dev_pm_domain_detach(priv->pd_dev[i], false);
> > + ret = PTR_ERR(priv->pd_dev_link[i]);
> > + goto detach_pm;
> > + }
> > + }
> > +
> > + return 0;
> > +
> > +detach_pm:
> > + while (--i >= 0) {
> > + device_link_del(priv->pd_dev_link[i]);
> > + dev_pm_domain_detach(priv->pd_dev[i], false);
> > + }
> > +
> > + return ret;
> > +}
> > +
> > +static int imx_dsp_detach_pm_domains(struct imx_dsp_rproc *priv)
> > +{
> > + int i;
> > +
> > + if (priv->num_domains <= 1)
> > + return 0;
> > +
> > + for (i = 0; i < priv->num_domains; i++) {
> > + device_link_del(priv->pd_dev_link[i]);
> > + dev_pm_domain_detach(priv->pd_dev[i], false);
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int imx_dsp_rproc_detect_mode(struct imx_dsp_rproc *priv)
> > +{
> > + const struct imx_dsp_rproc_dcfg *dcfg = priv->dcfg;
> > + struct device *dev = priv->dev;
> > + struct regmap *regmap;
> > + int ret = 0;
> > +
> > + switch (dcfg->method) {
> > + case IMX_DSP_SCU_API:
> > + ret = imx_scu_get_handle(&priv->ipc_handle);
> > + if (ret)
> > + return ret;
> > + return 0;
> > + case IMX_DSP_MMIO:
> > + regmap = syscon_regmap_lookup_by_phandle(dev->of_node, "fsl,dsp-ctrl");
> > + if (IS_ERR(regmap)) {
> > + dev_err(dev, "failed to find syscon\n");
> > + return PTR_ERR(regmap);
> > + }
> > +
> > + priv->regmap = regmap;
> > + default:
> > + break;
>
> Shouldn't it be an error if neither SCU of MMIO methods are specified?
Yes, I will update it in next version.
>
> > + }
> > +
> > + return ret;
> > +}
> > +
> > +static const char *imx_dsp_clks_names[DSP_RPROC_CLK_MAX] = {
> > + /* DSP clocks */
> > + "dsp_clk1", "dsp_clk2", "dsp_clk3", "dsp_clk4", "dsp_clk5", "dsp_clk6",
> > + "dsp_clk7", "dsp_clk8",
> > +
> > + /* Peripheral clocks */
> > + "per_clk1", "per_clk2", "per_clk3", "per_clk4", "per_clk5", "per_clk6",
> > + "per_clk7", "per_clk8", "per_clk9", "per_clk10", "per_clk11", "per_clk12",
> > + "per_clk13", "per_clk14", "per_clk15", "per_clk16", "per_clk17", "per_clk18",
> > +};
> > +
> > +static int imx_dsp_rproc_clk_get(struct imx_dsp_rproc *priv)
> > +{
> > + int i;
> > +
> > + for (i = 0; i < DSP_RPROC_CLK_MAX; i++) {
> > + priv->clks[i] = devm_clk_get_optional(priv->dev,
> > + imx_dsp_clks_names[i]);
>
> Please use the devm_clk_bulk_xyz() API.
OK, will update it in next version.
>
> > + if (IS_ERR(priv->clks[i])) {
> > + dev_err(priv->dev, "Failed to get clock %s\n",
> > + imx_dsp_clks_names[i]);
> > + return PTR_ERR(priv->clks[i]);
> > + }
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int imx_dsp_rproc_clk_enable(struct imx_dsp_rproc *priv)
> > +{
> > + int i, ret;
> > +
> > + for (i = 0; i < DSP_RPROC_CLK_MAX; i++) {
> > + ret = clk_prepare_enable(priv->clks[i]);
> > + if (ret < 0) {
> > + dev_err(priv->dev, "Failed to enable clk %s\n",
> > + imx_dsp_clks_names[i]);
> > + goto err_dsp_clks;
> > + }
> > + }
> > +
> > + return 0;
> > +
> > +err_dsp_clks:
> > + while (--i >= 0)
> > + clk_disable_unprepare(priv->clks[i]);
> > +
> > + return ret;
> > +}
> > +
> > +static void imx_dsp_rproc_clk_disable(struct imx_dsp_rproc *priv)
> > +{
> > + int i;
> > +
> > + for (i = 0; i < DSP_RPROC_CLK_MAX; i++)
> > + clk_disable_unprepare(priv->clks[i]);
> > +}
> > +
> > +static int imx_dsp_rproc_probe(struct platform_device *pdev)
> > +{
> > + struct device *dev = &pdev->dev;
> > + const struct imx_dsp_rproc_dcfg *dcfg;
> > + struct imx_dsp_rproc *priv;
> > + struct rproc *rproc;
> > + const char *fw_name;
> > + int ret;
> > +
> > + dcfg = of_device_get_match_data(dev);
> > + if (!dcfg)
> > + return -ENODEV;
> > +
> > + ret = rproc_of_parse_firmware(dev, 0, &fw_name);
> > + if (ret) {
> > + dev_err(dev, "failed to parse firmware-name property, ret = %d\n",
> > + ret);
> > + return ret;
> > + }
> > +
> > + rproc = rproc_alloc(dev, "imx-dsp-rproc", &imx_dsp_rproc_ops, fw_name,
> > + sizeof(*priv));
> > + if (!rproc)
> > + return -ENOMEM;
> > +
> > + priv = rproc->priv;
> > + priv->rproc = rproc;
> > + priv->dcfg = dcfg;
> > + priv->dev = dev;
> > +
> > + dev_set_drvdata(dev, rproc);
> > +
> > + priv->workqueue = create_workqueue(dev_name(dev));
> > + if (!priv->workqueue) {
> > + dev_err(dev, "cannot create workqueue\n");
> > + ret = -ENOMEM;
> > + goto err_wkq;
> > + }
> > +
> > + INIT_WORK(&priv->rproc_work, imx_dsp_rproc_vq_work);
> > +
> > + ret = imx_dsp_rproc_detect_mode(priv);
> > + if (ret) {
> > + dev_err(dev, "failed on imx_dsp_rproc_detect_mode\n");
> > + goto err_detect;
> > + }
> > +
> > + ret = imx_dsp_attach_pm_domains(priv);
> > + if (ret) {
> > + dev_err(dev, "failed on imx_dsp_attach_pm_domains\n");
> > + goto err_pm;
> > + }
> > +
> > + ret = imx_dsp_rproc_clk_get(priv);
> > + if (ret) {
> > + dev_err(dev, "failed on imx_dsp_rproc_clk_get\n");
> > + goto err_clk_get;
> > + }
> > +
> > + init_completion(&priv->pm_comp);
> > + rproc->auto_boot = false;
> > + ret = rproc_add(rproc);
> > + if (ret) {
> > + dev_err(dev, "rproc_add failed\n");
> > + goto err_rproc_add;
> > + }
> > +
> > + pm_runtime_enable(dev);
> > +
> > + return 0;
> > +
> > +err_rproc_add:
> > +err_clk_get:
>
> Name the gotos in relation to what they do rather than where they come from,
> something like "detach_domains". That way you don't need multiple goto
> statements that clutter the code.
Ok, will update it in next version
>
> > + imx_dsp_detach_pm_domains(priv);
> > +err_pm:
> > +err_detect:
>
> Same
>
> > + destroy_workqueue(priv->workqueue);
> > +err_wkq:
> > + rproc_free(rproc);
> > +
> > + return ret;
> > +}
> > +
> > +static int imx_dsp_rproc_remove(struct platform_device *pdev)
> > +{
> > + struct rproc *rproc = platform_get_drvdata(pdev);
> > + struct imx_dsp_rproc *priv = rproc->priv;
> > +
> > + pm_runtime_disable(&pdev->dev);
> > + rproc_del(rproc);
> > + imx_dsp_detach_pm_domains(priv);
> > + destroy_workqueue(priv->workqueue);
> > + rproc_free(rproc);
> > +
> > + return 0;
> > +}
> > +
> > +/* pm runtime */
> > +static int imx_dsp_runtime_resume(struct device *dev)
> > +{
> > + struct rproc *rproc = dev_get_drvdata(dev);
> > + struct imx_dsp_rproc *priv = rproc->priv;
> > + const struct imx_dsp_rproc_dcfg *dcfg = priv->dcfg;
> > + int ret;
> > +
> > + ret = imx_dsp_rproc_mbox_init(priv);
>
> Why is the mailbox setup and destroyed with every PM cycle? I find an overall
> lack of comments makes this driver difficult to review, resulting in having to
> spend more time to look at and understand the code. I will have to continue
> tomorrow because, well, I ran out of time.
>
> Mathieu
>
There is power domain attached with mailbox, if request the mailbox
channel, the power is enabled. so if setup mailbox in probe(), then
the power is enabled always which is no benefit for saving power.
so setup mailbox in pm_runtime_resume().
Sorry for lack of comments, I will add more in next version.
Again, Thanks your time for reviewing this patch.
Best regards
Wang shengjiu
> > + if (ret) {
> > + dev_err(dev, "failed on imx_dsp_rproc_mbox_init\n");
> > + return ret;
> > + }
> > +
> > + ret = imx_dsp_rproc_clk_enable(priv);
> > + if (ret) {
> > + dev_err(dev, "failed on imx_dsp_rproc_clk_enable\n");
> > + return ret;
> > + }
> > +
> > + /* reset DSP if needed */
> > + if (dcfg->reset)
> > + dcfg->reset(priv);
> > +
> > + return 0;
> > +}
> > +
> > +static int imx_dsp_runtime_suspend(struct device *dev)
> > +{
> > + struct rproc *rproc = dev_get_drvdata(dev);
> > + struct imx_dsp_rproc *priv = rproc->priv;
> > +
> > + imx_dsp_rproc_clk_disable(priv);
> > +
> > + imx_dsp_rproc_free_mbox(priv);
> > +
> > + return 0;
> > +}
> > +
> > +static void imx_dsp_load_firmware(const struct firmware *fw, void *context)
> > +{
> > + struct rproc *rproc = context;
> > + int ret;
> > +
> > + /* load the ELF segments to memory */
> > + ret = rproc_load_segments(rproc, fw);
> > + if (ret)
> > + goto out;
> > +
> > + /* power up the remote processor */
> > + ret = rproc->ops->start(rproc);
> > + if (ret)
> > + goto out;
> > +
> > + /* same flow as first start */
> > + rproc->ops->kick(rproc, 0);
> > +
> > +out:
> > + release_firmware(fw);
> > +}
> > +
> > +static int imx_dsp_suspend(struct device *dev)
> > +{
> > + struct rproc *rproc = dev_get_drvdata(dev);
> > + struct imx_dsp_rproc *priv = rproc->priv;
> > + __u32 mmsg = RP_MBOX_SUSPEND_SYSTEM;
> > + int ret;
> > +
> > + if (rproc->state == RPROC_RUNNING) {
> > + reinit_completion(&priv->pm_comp);
> > +
> > + ret = mbox_send_message(priv->tx_ch, (void *)&mmsg);
> > + if (ret < 0) {
> > + dev_err(dev, "PM mbox_send_message failed: %d\n", ret);
> > + return ret;
> > + }
> > +
> > + if (!wait_for_completion_timeout(&priv->pm_comp, msecs_to_jiffies(100)))
> > + return -EBUSY;
> > + }
> > +
> > + return pm_runtime_force_suspend(dev);
> > +}
> > +
> > +static int imx_dsp_resume(struct device *dev)
> > +{
> > + struct rproc *rproc = dev_get_drvdata(dev);
> > + int ret = 0;
> > +
> > + ret = pm_runtime_force_resume(dev);
> > + if (ret)
> > + return ret;
> > +
> > + if (rproc->state == RPROC_RUNNING) {
> > + /*TODO: load firmware and start */
> > + ret = request_firmware_nowait(THIS_MODULE,
> > + FW_ACTION_UEVENT,
> > + rproc->firmware,
> > + dev,
> > + GFP_KERNEL,
> > + rproc,
> > + imx_dsp_load_firmware);
> > + if (ret < 0) {
> > + dev_err(dev, "load firmware failed: %d\n", ret);
> > + goto err;
> > + }
> > + }
> > +
> > + return 0;
> > +
> > +err:
> > + pm_runtime_force_suspend(dev);
> > +
> > + return ret;
> > +}
> > +
> > +static const struct dev_pm_ops imx_dsp_rproc_pm_ops = {
> > + SET_SYSTEM_SLEEP_PM_OPS(imx_dsp_suspend, imx_dsp_resume)
> > + SET_RUNTIME_PM_OPS(imx_dsp_runtime_suspend,
> > + imx_dsp_runtime_resume, NULL)
> > +};
> > +
> > +static const struct of_device_id imx_dsp_rproc_of_match[] = {
> > + { .compatible = "fsl,imx8qxp-hifi4", .data = &imx_dsp_rproc_cfg_imx8qxp },
> > + { .compatible = "fsl,imx8qm-hifi4", .data = &imx_dsp_rproc_cfg_imx8qm },
> > + { .compatible = "fsl,imx8mp-hifi4", .data = &imx_dsp_rproc_cfg_imx8mp },
> > + { .compatible = "fsl,imx8ulp-hifi4", .data = &imx_dsp_rproc_cfg_imx8ulp },
> > + {},
> > +};
> > +MODULE_DEVICE_TABLE(of, imx_dsp_rproc_of_match);
> > +
> > +static struct platform_driver imx_dsp_rproc_driver = {
> > + .probe = imx_dsp_rproc_probe,
> > + .remove = imx_dsp_rproc_remove,
> > + .driver = {
> > + .name = "imx-dsp-rproc",
> > + .of_match_table = imx_dsp_rproc_of_match,
> > + .pm = &imx_dsp_rproc_pm_ops,
> > + },
> > +};
> > +module_platform_driver(imx_dsp_rproc_driver);
> > +
> > +MODULE_LICENSE("GPL v2");
> > +MODULE_DESCRIPTION("i.MX HiFi Core Remote Processor Control Driver");
> > +MODULE_AUTHOR("Shengjiu Wang <[email protected]>");
> > --
> > 2.17.1
> >
On Wed, Aug 25, 2021 at 03:28:36PM +0800, Shengjiu Wang wrote:
> Provide a basic driver to control DSP processor found on NXP i.MX8QM,
> i.MX8QXP, i.MX8MP and i.MX8ULP.
>
> Currently it is able to resolve addresses between DSP and main CPU,
> start and stop the processor, suspend and resume.
>
> The communication between DSP and main CPU is based on mailbox, there
> are three mailbox channels (tx, rx, rxdb).
>
> This driver was tested on NXP i.MX8QM, i.MX8QXP, i.MX8MP and i.MX8ULP.
>
> Signed-off-by: Shengjiu Wang <[email protected]>
> ---
> changes in v2:
> - change syscon to fsl,dsp-ctrl
>
> drivers/remoteproc/Kconfig | 11 +
> drivers/remoteproc/Makefile | 1 +
> drivers/remoteproc/imx_dsp_rproc.c | 1078 ++++++++++++++++++++++++++++
> 3 files changed, 1090 insertions(+)
> create mode 100644 drivers/remoteproc/imx_dsp_rproc.c
>
> diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig
> index 9a6eedc3994a..890a14e6f3f9 100644
> --- a/drivers/remoteproc/Kconfig
> +++ b/drivers/remoteproc/Kconfig
> @@ -34,6 +34,17 @@ config IMX_REMOTEPROC
>
> It's safe to say N here.
>
> +config IMX_DSP_REMOTEPROC
> + tristate "i.MX DSP remoteproc support"
> + depends on ARCH_MXC
> + depends on HAVE_ARM_SMCCC
> + select MAILBOX
> + help
> + Say y here to support iMX's DSP remote processors via the remote
> + processor framework.
> +
> + It's safe to say N here.
> +
> config INGENIC_VPU_RPROC
> tristate "Ingenic JZ47xx VPU remoteproc support"
> depends on MIPS || COMPILE_TEST
> diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile
> index bb26c9e4ef9c..37d5cb1c04bf 100644
> --- a/drivers/remoteproc/Makefile
> +++ b/drivers/remoteproc/Makefile
> @@ -12,6 +12,7 @@ remoteproc-y += remoteproc_virtio.o
> remoteproc-y += remoteproc_elf_loader.o
> obj-$(CONFIG_REMOTEPROC_CDEV) += remoteproc_cdev.o
> obj-$(CONFIG_IMX_REMOTEPROC) += imx_rproc.o
> +obj-$(CONFIG_IMX_DSP_REMOTEPROC) += imx_dsp_rproc.o
> obj-$(CONFIG_INGENIC_VPU_RPROC) += ingenic_rproc.o
> obj-$(CONFIG_MTK_SCP) += mtk_scp.o mtk_scp_ipi.o
> obj-$(CONFIG_OMAP_REMOTEPROC) += omap_remoteproc.o
> diff --git a/drivers/remoteproc/imx_dsp_rproc.c b/drivers/remoteproc/imx_dsp_rproc.c
> new file mode 100644
> index 000000000000..ce0596694122
> --- /dev/null
> +++ b/drivers/remoteproc/imx_dsp_rproc.c
> @@ -0,0 +1,1078 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +// Copyright 2021 NXP
> +
> +#include <linux/clk.h>
> +#include <linux/err.h>
> +#include <linux/interrupt.h>
> +#include <linux/kernel.h>
> +#include <linux/mailbox_client.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/module.h>
> +#include <linux/of_address.h>
> +#include <linux/of_reserved_mem.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_domain.h>
> +#include <linux/regmap.h>
> +#include <linux/remoteproc.h>
> +#include <linux/slab.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/workqueue.h>
> +#include <linux/firmware/imx/sci.h>
> +#include <dt-bindings/firmware/imx/rsrc.h>
> +#include <linux/arm-smccc.h>
> +
> +#include "remoteproc_internal.h"
> +#include "remoteproc_elf_helpers.h"
> +
> +enum imx_dsp_rp_mbox_messages {
> + RP_MBOX_SUSPEND_SYSTEM = 0xFF11,
> + RP_MBOX_SUSPEND_ACK = 0xFF12,
> + RP_MBOX_RESUME_SYSTEM = 0xFF13,
> + RP_MBOX_RESUME_ACK = 0xFF14,
> +};
> +
> +#define DSP_RPROC_CLK_MAX 32
> +
> +#define REMOTE_IS_READY BIT(0)
> +#define REMOTE_READY_WAIT_MAX_RETRIES 500
> +
> +/* att flags */
> +/* DSP own area. Can be mapped at probe */
> +#define ATT_OWN BIT(31)
> +#define ATT_IRAM BIT(30)
> +
> +/* i.MX8MP */
> +/* DAP registers */
> +#define IMX8M_DAP_DEBUG 0x28800000
> +#define IMX8M_DAP_DEBUG_SIZE (64 * 1024)
> +#define IMX8M_DAP_PWRCTL (0x4000 + 0x3020)
> +#define IMX8M_PWRCTL_CORERESET BIT(16)
> +
> +/* DSP audio mix registers */
> +#define IMX8M_AudioDSP_REG0 0x100
> +#define IMX8M_AudioDSP_REG1 0x104
> +#define IMX8M_AudioDSP_REG2 0x108
> +#define IMX8M_AudioDSP_REG3 0x10c
> +
> +#define IMX8M_AudioDSP_REG2_RUNSTALL BIT(5)
> +#define IMX8M_AudioDSP_REG2_PWAITMODE BIT(1)
> +
> +/* i.MX8ULP */
> +#define IMX8ULP_SIM_LPAV_REG_SYSCTRL0 0x8
> +#define IMX8ULP_SYSCTRL0_DSP_DBG_RST BIT(25)
> +#define IMX8ULP_SYSCTRL0_DSP_PLAT_CLK_EN BIT(19)
> +#define IMX8ULP_SYSCTRL0_DSP_PBCLK_EN BIT(18)
> +#define IMX8ULP_SYSCTRL0_DSP_CLK_EN BIT(17)
> +#define IMX8ULP_SYSCTRL0_DSP_RST BIT(16)
> +#define IMX8ULP_SYSCTRL0_DSP_OCD_HALT BIT(14)
> +#define IMX8ULP_SYSCTRL0_DSP_STALL BIT(13)
> +
> +#define IMX8ULP_SIP_HIFI_XRDC 0xc200000e
> +
> +/* address translation table */
> +struct imx_dsp_rproc_att {
> + u32 da; /* device address (From Cortex M4 view)*/
> + u32 sa; /* system bus address */
> + u32 size; /* size of reg range */
> + int flags;
> +};
> +
> +/* Remote core start/stop method */
> +enum imx_dsp_rproc_method {
> + /* Through syscon regmap */
> + IMX_DSP_MMIO,
> + IMX_DSP_SCU_API,
> +};
> +
> +struct imx_dsp_rproc {
> + struct device *dev;
> + struct regmap *regmap;
> + struct rproc *rproc;
> + const struct imx_dsp_rproc_dcfg *dcfg;
> + struct clk *clks[DSP_RPROC_CLK_MAX];
> + struct mbox_client cl;
> + struct mbox_client cl_rxdb;
> + struct mbox_chan *tx_ch;
> + struct mbox_chan *rx_ch;
> + struct mbox_chan *rxdb_ch;
> + struct device **pd_dev;
> + struct device_link **pd_dev_link;
> + struct imx_sc_ipc *ipc_handle;
> + struct work_struct rproc_work;
> + struct workqueue_struct *workqueue;
> + struct completion pm_comp;
> + spinlock_t mbox_lock; /* lock for mbox */
> + int num_domains;
> + u32 flags;
> +};
> +
> +struct imx_dsp_rproc_dcfg {
> + u32 src_reg;
> + u32 src_mask;
> + u32 src_start;
> + u32 src_stop;
> + const struct imx_dsp_rproc_att *att;
> + size_t att_size;
> + enum imx_dsp_rproc_method method;
> + int (*reset)(struct imx_dsp_rproc *priv);
> +};
> +
> +static const struct imx_dsp_rproc_att imx_dsp_rproc_att_imx8qm[] = {
> + /* dev addr , sys addr , size , flags */
> + { 0x596e8000, 0x556e8000, 0x00008000, ATT_OWN },
> + { 0x596f0000, 0x556f0000, 0x00008000, ATT_OWN },
> + { 0x596f8000, 0x556f8000, 0x00000800, ATT_OWN | ATT_IRAM},
> + { 0x55700000, 0x55700000, 0x00070000, ATT_OWN },
> + /* DDR (Data) */
> + { 0x80000000, 0x80000000, 0x60000000, 0},
> +};
> +
> +static const struct imx_dsp_rproc_att imx_dsp_rproc_att_imx8qxp[] = {
> + /* dev addr , sys addr , size , flags */
> + { 0x596e8000, 0x596e8000, 0x00008000, ATT_OWN },
> + { 0x596f0000, 0x596f0000, 0x00008000, ATT_OWN },
> + { 0x596f8000, 0x596f8000, 0x00000800, ATT_OWN | ATT_IRAM},
> + { 0x59700000, 0x59700000, 0x00070000, ATT_OWN },
> + /* DDR (Data) */
> + { 0x80000000, 0x80000000, 0x60000000, 0},
> +};
> +
> +static const struct imx_dsp_rproc_att imx_dsp_rproc_att_imx8mp[] = {
> + /* dev addr , sys addr , size , flags */
> + { 0x3b6e8000, 0x3b6e8000, 0x00008000, ATT_OWN },
> + { 0x3b6f0000, 0x3b6f0000, 0x00008000, ATT_OWN },
> + { 0x3b6f8000, 0x3b6f8000, 0x00000800, ATT_OWN | ATT_IRAM},
> + { 0x3b700000, 0x3b700000, 0x00040000, ATT_OWN },
> + /* DDR (Data) */
> + { 0x40000000, 0x40000000, 0x80000000, 0},
> +};
> +
> +static const struct imx_dsp_rproc_att imx_dsp_rproc_att_imx8ulp[] = {
> + /* dev addr , sys addr , size , flags */
> + { 0x21170000, 0x21170000, 0x00010000, ATT_OWN | ATT_IRAM},
> + { 0x21180000, 0x21180000, 0x00010000, ATT_OWN },
> + /* DDR (Data) */
> + { 0x0c000000, 0x80000000, 0x10000000, 0},
> + { 0x30000000, 0x90000000, 0x10000000, 0},
> +};
> +
> +static int imx8mp_dsp_reset(struct imx_dsp_rproc *priv)
> +{
> + void __iomem *dap = ioremap_wc(IMX8M_DAP_DEBUG, IMX8M_DAP_DEBUG_SIZE);
> + int pwrctl;
> +
> + /* put DSP into reset and stall */
> + pwrctl = readl(dap + IMX8M_DAP_PWRCTL);
> + pwrctl |= IMX8M_PWRCTL_CORERESET;
> + writel(pwrctl, dap + IMX8M_DAP_PWRCTL);
> +
> + /* keep reset asserted for 10 cycles */
> + usleep_range(1, 2);
> +
> + regmap_update_bits(priv->regmap, IMX8M_AudioDSP_REG2,
> + IMX8M_AudioDSP_REG2_RUNSTALL,
> + IMX8M_AudioDSP_REG2_RUNSTALL);
> +
> + /* take the DSP out of reset and keep stalled for FW loading */
> + pwrctl = readl(dap + IMX8M_DAP_PWRCTL);
> + pwrctl &= ~IMX8M_PWRCTL_CORERESET;
> + writel(pwrctl, dap + IMX8M_DAP_PWRCTL);
> +
> + iounmap(dap);
> + return 0;
> +}
> +
> +static int imx8ulp_dsp_reset(struct imx_dsp_rproc *priv)
> +{
> + struct arm_smccc_res res;
> +
> + regmap_update_bits(priv->regmap, IMX8ULP_SIM_LPAV_REG_SYSCTRL0,
> + IMX8ULP_SYSCTRL0_DSP_RST, IMX8ULP_SYSCTRL0_DSP_RST);
> + regmap_update_bits(priv->regmap, IMX8ULP_SIM_LPAV_REG_SYSCTRL0,
> + IMX8ULP_SYSCTRL0_DSP_STALL,
> + IMX8ULP_SYSCTRL0_DSP_STALL);
> +
> + arm_smccc_smc(IMX8ULP_SIP_HIFI_XRDC, 0, 0, 0, 0, 0, 0, 0, &res);
> +
> + regmap_update_bits(priv->regmap, IMX8ULP_SIM_LPAV_REG_SYSCTRL0,
> + IMX8ULP_SYSCTRL0_DSP_RST, 0);
> + regmap_update_bits(priv->regmap, IMX8ULP_SIM_LPAV_REG_SYSCTRL0,
> + IMX8ULP_SYSCTRL0_DSP_DBG_RST, 0);
> +
> + return 0;
> +}
> +
> +static const struct imx_dsp_rproc_dcfg imx_dsp_rproc_cfg_imx8mp = {
> + .src_reg = IMX8M_AudioDSP_REG2,
> + .src_mask = IMX8M_AudioDSP_REG2_RUNSTALL,
> + .src_start = 0,
> + .src_stop = IMX8M_AudioDSP_REG2_RUNSTALL,
> + .att = imx_dsp_rproc_att_imx8mp,
> + .att_size = ARRAY_SIZE(imx_dsp_rproc_att_imx8mp),
> + .method = IMX_DSP_MMIO,
> + .reset = imx8mp_dsp_reset,
> +};
> +
> +static const struct imx_dsp_rproc_dcfg imx_dsp_rproc_cfg_imx8ulp = {
> + .src_reg = IMX8ULP_SIM_LPAV_REG_SYSCTRL0,
> + .src_mask = IMX8ULP_SYSCTRL0_DSP_STALL,
> + .src_start = 0,
> + .src_stop = IMX8ULP_SYSCTRL0_DSP_STALL,
> + .att = imx_dsp_rproc_att_imx8ulp,
> + .att_size = ARRAY_SIZE(imx_dsp_rproc_att_imx8ulp),
> + .method = IMX_DSP_MMIO,
> + .reset = imx8ulp_dsp_reset,
> +};
> +
> +static const struct imx_dsp_rproc_dcfg imx_dsp_rproc_cfg_imx8qxp = {
> + .att = imx_dsp_rproc_att_imx8qxp,
> + .att_size = ARRAY_SIZE(imx_dsp_rproc_att_imx8qxp),
> + .method = IMX_DSP_SCU_API,
> +};
> +
> +static const struct imx_dsp_rproc_dcfg imx_dsp_rproc_cfg_imx8qm = {
> + .att = imx_dsp_rproc_att_imx8qm,
> + .att_size = ARRAY_SIZE(imx_dsp_rproc_att_imx8qm),
> + .method = IMX_DSP_SCU_API,
> +};
> +
> +static int imx_dsp_rproc_ready(struct rproc *rproc)
> +{
> + struct imx_dsp_rproc *priv = rproc->priv;
> + int i;
> +
> + if (!priv->rxdb_ch)
> + return 0;
> +
> + for (i = 0; i < REMOTE_READY_WAIT_MAX_RETRIES; i++) {
> + if (priv->flags & REMOTE_IS_READY)
> + return 0;
> + usleep_range(100, 200);
> + }
> +
> + return -ETIMEDOUT;
> +}
> +
> +static int imx_dsp_rproc_start(struct rproc *rproc)
> +{
> + struct imx_dsp_rproc *priv = rproc->priv;
> + const struct imx_dsp_rproc_dcfg *dcfg = priv->dcfg;
> + struct device *dev = priv->dev;
> + int ret;
> +
> + switch (dcfg->method) {
> + case IMX_DSP_MMIO:
> + ret = regmap_update_bits(priv->regmap,
> + dcfg->src_reg,
> + dcfg->src_mask,
> + dcfg->src_start);
> + break;
> + case IMX_DSP_SCU_API:
> + ret = imx_sc_pm_cpu_start(priv->ipc_handle,
> + IMX_SC_R_DSP,
> + true,
> + rproc->bootaddr);
> + break;
> + default:
> + return -EOPNOTSUPP;
> + }
> +
> + if (ret)
> + dev_err(dev, "Failed to enable remote core!\n");
> + else
> + ret = imx_dsp_rproc_ready(rproc);
> +
> + return ret;
> +}
> +
> +static int imx_dsp_rproc_stop(struct rproc *rproc)
> +{
> + struct imx_dsp_rproc *priv = rproc->priv;
> + const struct imx_dsp_rproc_dcfg *dcfg = priv->dcfg;
> + struct device *dev = priv->dev;
> + int ret = 0;
> +
> + if (rproc->state == RPROC_CRASHED) {
> + priv->flags &= ~REMOTE_IS_READY;
> + return 0;
> + }
> +
> + switch (dcfg->method) {
> + case IMX_DSP_MMIO:
> + ret = regmap_update_bits(priv->regmap, dcfg->src_reg, dcfg->src_mask,
> + dcfg->src_stop);
> + break;
> + case IMX_DSP_SCU_API:
> + ret = imx_sc_pm_cpu_start(priv->ipc_handle,
> + IMX_SC_R_DSP,
> + false,
> + rproc->bootaddr);
> + break;
> + default:
> + return -EOPNOTSUPP;
> + }
> +
> + if (ret)
> + dev_err(dev, "Failed to stop remote core\n");
> + else
> + priv->flags &= ~REMOTE_IS_READY;
> +
> + return ret;
> +}
> +
> +static int imx_dsp_rproc_sys_to_da(struct imx_dsp_rproc *priv, u64 sys,
> + size_t len, u64 *da)
> +{
> + const struct imx_dsp_rproc_dcfg *dcfg = priv->dcfg;
> + int i;
> +
> + /* parse address translation table */
> + for (i = 0; i < dcfg->att_size; i++) {
> + const struct imx_dsp_rproc_att *att = &dcfg->att[i];
> +
> + if (sys >= att->sa && sys + len <= att->sa + att->size) {
> + unsigned int offset = sys - att->sa;
> +
> + *da = att->da + offset;
> + return 0;
> + }
> + }
> +
> + return -ENOENT;
> +}
> +
> +static void imx_dsp_rproc_vq_work(struct work_struct *work)
> +{
> + struct imx_dsp_rproc *priv = container_of(work, struct imx_dsp_rproc,
> + rproc_work);
> +
> + rproc_vq_interrupt(priv->rproc, 0);
> + rproc_vq_interrupt(priv->rproc, 1);
> +}
> +
> +static void imx_dsp_rproc_rx_callback(struct mbox_client *cl, void *data)
> +{
> + struct rproc *rproc = dev_get_drvdata(cl->dev);
> + struct imx_dsp_rproc *priv = rproc->priv;
> + u32 message = (u32)(*(u32 *)data);
> +
> + dev_dbg(priv->dev, "mbox msg: 0x%x\n", message);
> +
> + switch (message) {
> + case RP_MBOX_SUSPEND_ACK:
> + complete(&priv->pm_comp);
> + break;
> + case RP_MBOX_RESUME_ACK:
> + complete(&priv->pm_comp);
> + break;
> + default:
> + queue_work(priv->workqueue, &priv->rproc_work);
> + break;
> + }
> +}
> +
> +static void imx_dsp_rproc_rxdb_callback(struct mbox_client *cl, void *msg)
> +{
> + struct rproc *rproc = dev_get_drvdata(cl->dev);
> + struct imx_dsp_rproc *priv = rproc->priv;
> + unsigned long flags;
> +
> + spin_lock_irqsave(&priv->mbox_lock, flags);
> + priv->flags |= REMOTE_IS_READY;
> + spin_unlock_irqrestore(&priv->mbox_lock, flags);
> +}
> +
> +static int imx_dsp_rproc_mbox_init(struct imx_dsp_rproc *priv)
> +{
> + struct device *dev = priv->dev;
> + struct mbox_client *cl;
> + int ret;
> +
> + if (!of_get_property(dev->of_node, "mbox-names", NULL))
> + return 0;
> +
> + spin_lock_init(&priv->mbox_lock);
> +
> + cl = &priv->cl;
> + cl->dev = dev;
> + cl->tx_block = true;
> + cl->tx_tout = 100;
> + cl->knows_txdone = false;
> + cl->rx_callback = imx_dsp_rproc_rx_callback;
> +
> + priv->tx_ch = mbox_request_channel_byname(cl, "tx");
> + if (IS_ERR(priv->tx_ch)) {
> + ret = PTR_ERR(priv->tx_ch);
> + dev_dbg(cl->dev, "failed to request tx mailbox channel: %d\n",
> + ret);
> + goto err_out;
> + }
> +
> + priv->rx_ch = mbox_request_channel_byname(cl, "rx");
> + if (IS_ERR(priv->rx_ch)) {
> + ret = PTR_ERR(priv->rx_ch);
> + dev_dbg(cl->dev, "failed to request rx mailbox channel: %d\n",
> + ret);
> + goto err_out;
> + }
> +
> + cl = &priv->cl_rxdb;
> + cl->dev = dev;
> + cl->rx_callback = imx_dsp_rproc_rxdb_callback;
> +
> + /*
> + * RX door bell is used to receive the ready signal from remote
> + * after the partition reset of A core.
> + */
> + priv->rxdb_ch = mbox_request_channel_byname(cl, "rxdb");
> + if (IS_ERR(priv->rxdb_ch)) {
> + ret = PTR_ERR(priv->rxdb_ch);
> + dev_dbg(cl->dev, "failed to request mbox chan rxdb, ret %d\n",
> + ret);
> + goto err_out;
> + }
> +
> + return 0;
> +
> +err_out:
> + if (!IS_ERR(priv->tx_ch))
> + mbox_free_channel(priv->tx_ch);
> + if (!IS_ERR(priv->rx_ch))
> + mbox_free_channel(priv->rx_ch);
> + if (!IS_ERR(priv->rxdb_ch))
> + mbox_free_channel(priv->rxdb_ch);
> +
> + return ret;
> +}
> +
> +static void imx_dsp_rproc_free_mbox(struct imx_dsp_rproc *priv)
> +{
> + mbox_free_channel(priv->tx_ch);
> + mbox_free_channel(priv->rx_ch);
> + mbox_free_channel(priv->rxdb_ch);
> +}
> +
> +static int imx_dsp_rproc_add_carveout(struct imx_dsp_rproc *priv)
> +{
> + const struct imx_dsp_rproc_dcfg *dcfg = priv->dcfg;
> + struct rproc *rproc = priv->rproc;
> + struct device *dev = priv->dev;
> + struct device_node *np = dev->of_node;
> + struct of_phandle_iterator it;
> + struct rproc_mem_entry *mem;
> + struct reserved_mem *rmem;
> + void __iomem *cpu_addr;
> + int a;
> + u64 da;
> +
> + /* remap required addresses */
> + for (a = 0; a < dcfg->att_size; a++) {
> + const struct imx_dsp_rproc_att *att = &dcfg->att[a];
> +
> + if (!(att->flags & ATT_OWN))
> + continue;
> +
> + if (imx_dsp_rproc_sys_to_da(priv, att->sa, att->size, &da))
> + return -EINVAL;
> +
> + cpu_addr = devm_ioremap_wc(dev, att->sa, att->size);
> +
> + /* Register memory region */
> + mem = rproc_mem_entry_init(dev, cpu_addr, (dma_addr_t)att->sa,
> + att->size, da,
> + NULL,
> + NULL,
> + "dsp_mem");
> +
> + if (mem)
> + rproc_coredump_add_segment(rproc, da, att->size);
> + else
> + return -ENOMEM;
> +
> + rproc_add_carveout(rproc, mem);
> + }
> +
> + of_phandle_iterator_init(&it, np, "memory-region", NULL, 0);
> + while (of_phandle_iterator_next(&it) == 0) {
> + /*
> + * Ignore the first memory region which will be used vdev buffer.
> + * No need to do extra handlings, rproc_add_virtio_dev will handle it.
> + */
> + if (!strcmp(it.node->name, "vdev0buffer"))
> + continue;
> +
> + rmem = of_reserved_mem_lookup(it.node);
> + if (!rmem) {
> + dev_err(dev, "unable to acquire memory-region\n");
> + return -EINVAL;
> + }
> +
> + if (imx_dsp_rproc_sys_to_da(priv, rmem->base, rmem->size, &da))
> + return -EINVAL;
> +
> + cpu_addr = devm_ioremap_wc(dev, rmem->base, rmem->size);
> +
> + /* Register memory region */
> + mem = rproc_mem_entry_init(dev, cpu_addr, (dma_addr_t)rmem->base,
> + rmem->size, da,
> + NULL,
> + NULL,
> + it.node->name);
> +
> + if (mem)
> + rproc_coredump_add_segment(rproc, da, rmem->size);
> + else
> + return -ENOMEM;
> +
> + rproc_add_carveout(rproc, mem);
> + }
> +
> + return 0;
> +}
> +
> +/*
> + * imx_dsp_rproc_elf_load_segments() specially check if memsz is zero
> + * or not.
> + */
> +static int imx_dsp_rproc_elf_load_segments(struct rproc *rproc,
> + const struct firmware *fw)
> +{
> + struct device *dev = &rproc->dev;
> + u8 class = fw_elf_get_class(fw);
> + u32 elf_phdr_get_size = elf_size_of_phdr(class);
> + const u8 *elf_data = fw->data;
> + const void *ehdr, *phdr;
> + int i, ret = 0;
> + u16 phnum;
> +
> + ehdr = elf_data;
> + phnum = elf_hdr_get_e_phnum(class, ehdr);
> + phdr = elf_data + elf_hdr_get_e_phoff(class, ehdr);
> +
> + /* go through the available ELF segments */
> + for (i = 0; i < phnum; i++, phdr += elf_phdr_get_size) {
> + u64 da = elf_phdr_get_p_paddr(class, phdr);
> + u64 memsz = elf_phdr_get_p_memsz(class, phdr);
> + u64 filesz = elf_phdr_get_p_filesz(class, phdr);
> + u64 offset = elf_phdr_get_p_offset(class, phdr);
> + u32 type = elf_phdr_get_p_type(class, phdr);
> + void *ptr;
> + bool is_iomem;
> +
> + if (type != PT_LOAD || !memsz)
> + continue;
> +
> + dev_dbg(dev, "phdr: type %d da 0x%llx memsz 0x%llx filesz 0x%llx\n",
> + type, da, memsz, filesz);
> +
> + if (filesz > memsz) {
> + dev_err(dev, "bad phdr filesz 0x%llx memsz 0x%llx\n",
> + filesz, memsz);
> + ret = -EINVAL;
> + break;
> + }
> +
> + if (offset + filesz > fw->size) {
> + dev_err(dev, "truncated fw: need 0x%llx avail 0x%zx\n",
> + offset + filesz, fw->size);
> + ret = -EINVAL;
> + break;
> + }
> +
> + if (!rproc_u64_fit_in_size_t(memsz)) {
> + dev_err(dev, "size (%llx) does not fit in size_t type\n",
> + memsz);
> + ret = -EOVERFLOW;
> + break;
> + }
> +
> + /* grab the kernel address for this device address */
> + ptr = rproc_da_to_va(rproc, da, memsz, &is_iomem);
> + if (!ptr) {
> + dev_err(dev, "bad phdr da 0x%llx mem 0x%llx\n", da,
> + memsz);
> + ret = -EINVAL;
> + break;
> + }
> +
> + /* put the segment where the remote processor expects it */
> + if (filesz)
> + memcpy(ptr, elf_data + offset, filesz);
> +
> + /*
> + * Zero out remaining memory for this segment.
> + *
> + * This isn't strictly required since dma_alloc_coherent already
> + * did this for us. albeit harmless, we may consider removing
> + * this.
> + */
> + if (memsz > filesz)
> + memset(ptr + filesz, 0, memsz - filesz);
> + }
> +
> + return ret;
> +}
> +
> +static int imx_dsp_rproc_prepare(struct rproc *rproc)
> +{
> + struct imx_dsp_rproc *priv = rproc->priv;
> + struct device *dev = priv->dev;
> + struct rproc_mem_entry *carveout;
> + int ret;
> +
> + ret = imx_dsp_rproc_add_carveout(priv);
> + if (ret) {
> + dev_err(dev, "failed on imx_dsp_rproc_add_carveout\n");
> + return ret;
> + }
> +
> + pm_runtime_get_sync(dev);
> +
> + /* clear buffers */
> + list_for_each_entry(carveout, &rproc->carveouts, node) {
> + if (carveout->va)
> + memset(carveout->va, 0, carveout->len);
> + }
> +
> + return 0;
> +}
> +
> +static int imx_dsp_rproc_unprepare(struct rproc *rproc)
> +{
> + struct imx_dsp_rproc *priv = rproc->priv;
> +
> + pm_runtime_put_sync(priv->dev);
> +
> + return 0;
> +}
> +
> +static void imx_dsp_rproc_kick(struct rproc *rproc, int vqid)
> +{
> + struct imx_dsp_rproc *priv = rproc->priv;
> + int err;
> + __u32 mmsg;
> +
> + if (!priv->tx_ch) {
> + dev_err(priv->dev, "No initialized mbox tx channel\n");
> + return;
> + }
> +
> + /*
> + * Send the index of the triggered virtqueue as the mu payload.
> + * Let remote processor know which virtqueue is used.
> + */
> + mmsg = vqid;
> +
> + err = mbox_send_message(priv->tx_ch, (void *)&mmsg);
> + if (err < 0)
> + dev_err(priv->dev, "%s: failed (%d, err:%d)\n",
> + __func__, vqid, err);
> +}
> +
> +static const struct rproc_ops imx_dsp_rproc_ops = {
> + .prepare = imx_dsp_rproc_prepare,
> + .unprepare = imx_dsp_rproc_unprepare,
> + .start = imx_dsp_rproc_start,
> + .stop = imx_dsp_rproc_stop,
> + .kick = imx_dsp_rproc_kick,
> + .load = imx_dsp_rproc_elf_load_segments,
> + .parse_fw = rproc_elf_load_rsc_table,
> + .sanity_check = rproc_elf_sanity_check,
> + .get_boot_addr = rproc_elf_get_boot_addr,
> +};
> +
> +static int imx_dsp_attach_pm_domains(struct imx_dsp_rproc *priv)
> +{
> + struct device *dev = priv->dev;
> + int ret, i;
> +
> + priv->num_domains = of_count_phandle_with_args(dev->of_node,
> + "power-domains",
> + "#power-domain-cells");
> + if (priv->num_domains <= 1)
> + return 0;
> +
> + priv->pd_dev = devm_kmalloc_array(dev, priv->num_domains,
> + sizeof(*priv->pd_dev),
> + GFP_KERNEL);
> + if (!priv->pd_dev)
> + return -ENOMEM;
> +
> + priv->pd_dev_link = devm_kmalloc_array(dev, priv->num_domains,
> + sizeof(*priv->pd_dev_link),
> + GFP_KERNEL);
> + if (!priv->pd_dev_link)
> + return -ENOMEM;
> +
> + for (i = 0; i < priv->num_domains; i++) {
> + priv->pd_dev[i] = dev_pm_domain_attach_by_id(dev, i);
> + if (IS_ERR(priv->pd_dev[i]))
> + return PTR_ERR(priv->pd_dev[i]);
> +
> + priv->pd_dev_link[i] = device_link_add(dev,
> + priv->pd_dev[i],
> + DL_FLAG_STATELESS |
> + DL_FLAG_PM_RUNTIME |
> + DL_FLAG_RPM_ACTIVE);
> + if (IS_ERR(priv->pd_dev_link[i])) {
> + dev_pm_domain_detach(priv->pd_dev[i], false);
> + ret = PTR_ERR(priv->pd_dev_link[i]);
> + goto detach_pm;
> + }
> + }
> +
> + return 0;
> +
> +detach_pm:
> + while (--i >= 0) {
> + device_link_del(priv->pd_dev_link[i]);
> + dev_pm_domain_detach(priv->pd_dev[i], false);
> + }
> +
> + return ret;
> +}
> +
> +static int imx_dsp_detach_pm_domains(struct imx_dsp_rproc *priv)
> +{
> + int i;
> +
> + if (priv->num_domains <= 1)
> + return 0;
> +
> + for (i = 0; i < priv->num_domains; i++) {
> + device_link_del(priv->pd_dev_link[i]);
> + dev_pm_domain_detach(priv->pd_dev[i], false);
> + }
> +
> + return 0;
> +}
> +
> +static int imx_dsp_rproc_detect_mode(struct imx_dsp_rproc *priv)
> +{
> + const struct imx_dsp_rproc_dcfg *dcfg = priv->dcfg;
> + struct device *dev = priv->dev;
> + struct regmap *regmap;
> + int ret = 0;
> +
> + switch (dcfg->method) {
> + case IMX_DSP_SCU_API:
> + ret = imx_scu_get_handle(&priv->ipc_handle);
> + if (ret)
> + return ret;
> + return 0;
> + case IMX_DSP_MMIO:
> + regmap = syscon_regmap_lookup_by_phandle(dev->of_node, "fsl,dsp-ctrl");
> + if (IS_ERR(regmap)) {
> + dev_err(dev, "failed to find syscon\n");
> + return PTR_ERR(regmap);
> + }
> +
> + priv->regmap = regmap;
> + default:
> + break;
> + }
> +
> + return ret;
> +}
> +
> +static const char *imx_dsp_clks_names[DSP_RPROC_CLK_MAX] = {
> + /* DSP clocks */
> + "dsp_clk1", "dsp_clk2", "dsp_clk3", "dsp_clk4", "dsp_clk5", "dsp_clk6",
> + "dsp_clk7", "dsp_clk8",
> +
> + /* Peripheral clocks */
> + "per_clk1", "per_clk2", "per_clk3", "per_clk4", "per_clk5", "per_clk6",
> + "per_clk7", "per_clk8", "per_clk9", "per_clk10", "per_clk11", "per_clk12",
> + "per_clk13", "per_clk14", "per_clk15", "per_clk16", "per_clk17", "per_clk18",
> +};
> +
> +static int imx_dsp_rproc_clk_get(struct imx_dsp_rproc *priv)
> +{
> + int i;
> +
> + for (i = 0; i < DSP_RPROC_CLK_MAX; i++) {
> + priv->clks[i] = devm_clk_get_optional(priv->dev,
> + imx_dsp_clks_names[i]);
> + if (IS_ERR(priv->clks[i])) {
> + dev_err(priv->dev, "Failed to get clock %s\n",
> + imx_dsp_clks_names[i]);
> + return PTR_ERR(priv->clks[i]);
> + }
> + }
> +
> + return 0;
> +}
> +
> +static int imx_dsp_rproc_clk_enable(struct imx_dsp_rproc *priv)
> +{
> + int i, ret;
> +
> + for (i = 0; i < DSP_RPROC_CLK_MAX; i++) {
> + ret = clk_prepare_enable(priv->clks[i]);
> + if (ret < 0) {
> + dev_err(priv->dev, "Failed to enable clk %s\n",
> + imx_dsp_clks_names[i]);
> + goto err_dsp_clks;
> + }
> + }
> +
> + return 0;
> +
> +err_dsp_clks:
> + while (--i >= 0)
> + clk_disable_unprepare(priv->clks[i]);
> +
> + return ret;
> +}
> +
> +static void imx_dsp_rproc_clk_disable(struct imx_dsp_rproc *priv)
> +{
> + int i;
> +
> + for (i = 0; i < DSP_RPROC_CLK_MAX; i++)
> + clk_disable_unprepare(priv->clks[i]);
> +}
> +
> +static int imx_dsp_rproc_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + const struct imx_dsp_rproc_dcfg *dcfg;
> + struct imx_dsp_rproc *priv;
> + struct rproc *rproc;
> + const char *fw_name;
> + int ret;
> +
> + dcfg = of_device_get_match_data(dev);
> + if (!dcfg)
> + return -ENODEV;
> +
> + ret = rproc_of_parse_firmware(dev, 0, &fw_name);
> + if (ret) {
> + dev_err(dev, "failed to parse firmware-name property, ret = %d\n",
> + ret);
> + return ret;
> + }
> +
> + rproc = rproc_alloc(dev, "imx-dsp-rproc", &imx_dsp_rproc_ops, fw_name,
> + sizeof(*priv));
> + if (!rproc)
> + return -ENOMEM;
> +
> + priv = rproc->priv;
> + priv->rproc = rproc;
> + priv->dcfg = dcfg;
> + priv->dev = dev;
> +
> + dev_set_drvdata(dev, rproc);
> +
> + priv->workqueue = create_workqueue(dev_name(dev));
> + if (!priv->workqueue) {
> + dev_err(dev, "cannot create workqueue\n");
> + ret = -ENOMEM;
> + goto err_wkq;
> + }
> +
> + INIT_WORK(&priv->rproc_work, imx_dsp_rproc_vq_work);
> +
> + ret = imx_dsp_rproc_detect_mode(priv);
> + if (ret) {
> + dev_err(dev, "failed on imx_dsp_rproc_detect_mode\n");
> + goto err_detect;
> + }
> +
> + ret = imx_dsp_attach_pm_domains(priv);
> + if (ret) {
> + dev_err(dev, "failed on imx_dsp_attach_pm_domains\n");
> + goto err_pm;
> + }
> +
> + ret = imx_dsp_rproc_clk_get(priv);
> + if (ret) {
> + dev_err(dev, "failed on imx_dsp_rproc_clk_get\n");
> + goto err_clk_get;
> + }
> +
> + init_completion(&priv->pm_comp);
> + rproc->auto_boot = false;
> + ret = rproc_add(rproc);
> + if (ret) {
> + dev_err(dev, "rproc_add failed\n");
> + goto err_rproc_add;
> + }
> +
> + pm_runtime_enable(dev);
> +
> + return 0;
> +
> +err_rproc_add:
> +err_clk_get:
> + imx_dsp_detach_pm_domains(priv);
> +err_pm:
> +err_detect:
> + destroy_workqueue(priv->workqueue);
> +err_wkq:
> + rproc_free(rproc);
> +
> + return ret;
> +}
> +
> +static int imx_dsp_rproc_remove(struct platform_device *pdev)
> +{
> + struct rproc *rproc = platform_get_drvdata(pdev);
> + struct imx_dsp_rproc *priv = rproc->priv;
> +
> + pm_runtime_disable(&pdev->dev);
> + rproc_del(rproc);
> + imx_dsp_detach_pm_domains(priv);
> + destroy_workqueue(priv->workqueue);
> + rproc_free(rproc);
> +
> + return 0;
> +}
> +
> +/* pm runtime */
> +static int imx_dsp_runtime_resume(struct device *dev)
> +{
> + struct rproc *rproc = dev_get_drvdata(dev);
> + struct imx_dsp_rproc *priv = rproc->priv;
> + const struct imx_dsp_rproc_dcfg *dcfg = priv->dcfg;
> + int ret;
> +
> + ret = imx_dsp_rproc_mbox_init(priv);
> + if (ret) {
> + dev_err(dev, "failed on imx_dsp_rproc_mbox_init\n");
> + return ret;
> + }
> +
> + ret = imx_dsp_rproc_clk_enable(priv);
> + if (ret) {
> + dev_err(dev, "failed on imx_dsp_rproc_clk_enable\n");
> + return ret;
> + }
> +
> + /* reset DSP if needed */
> + if (dcfg->reset)
> + dcfg->reset(priv);
> +
> + return 0;
> +}
> +
> +static int imx_dsp_runtime_suspend(struct device *dev)
> +{
> + struct rproc *rproc = dev_get_drvdata(dev);
> + struct imx_dsp_rproc *priv = rproc->priv;
> +
> + imx_dsp_rproc_clk_disable(priv);
> +
> + imx_dsp_rproc_free_mbox(priv);
> +
> + return 0;
> +}
> +
> +static void imx_dsp_load_firmware(const struct firmware *fw, void *context)
> +{
> + struct rproc *rproc = context;
> + int ret;
> +
> + /* load the ELF segments to memory */
> + ret = rproc_load_segments(rproc, fw);
> + if (ret)
> + goto out;
> +
> + /* power up the remote processor */
> + ret = rproc->ops->start(rproc);
> + if (ret)
> + goto out;
> +
> + /* same flow as first start */
> + rproc->ops->kick(rproc, 0);
> +
> +out:
> + release_firmware(fw);
> +}
> +
> +static int imx_dsp_suspend(struct device *dev)
> +{
> + struct rproc *rproc = dev_get_drvdata(dev);
> + struct imx_dsp_rproc *priv = rproc->priv;
> + __u32 mmsg = RP_MBOX_SUSPEND_SYSTEM;
> + int ret;
> +
> + if (rproc->state == RPROC_RUNNING) {
if (rproc->state != RPROC_RUNNING)
return;
> + reinit_completion(&priv->pm_comp);
> +
> + ret = mbox_send_message(priv->tx_ch, (void *)&mmsg);
> + if (ret < 0) {
> + dev_err(dev, "PM mbox_send_message failed: %d\n", ret);
> + return ret;
> + }
> +
> + if (!wait_for_completion_timeout(&priv->pm_comp, msecs_to_jiffies(100)))
> + return -EBUSY;
> + }
> +
> + return pm_runtime_force_suspend(dev);
Please add a comment that explains why this needs to be called.
> +}
> +
> +static int imx_dsp_resume(struct device *dev)
> +{
> + struct rproc *rproc = dev_get_drvdata(dev);
> + int ret = 0;
> +
> + ret = pm_runtime_force_resume(dev);
> + if (ret)
> + return ret;
> +
> + if (rproc->state == RPROC_RUNNING) {
Same as above
> + /*TODO: load firmware and start */
Not sure about the "TODO" part... To me this is exactly what
request_firmware_nowait() does.
> + ret = request_firmware_nowait(THIS_MODULE,
> + FW_ACTION_UEVENT,
> + rproc->firmware,
> + dev,
> + GFP_KERNEL,
> + rproc,
> + imx_dsp_load_firmware);
Stacking.
Based on the implementation of imx_dsp_load_firmare() I have to guess that image
segments are lost during a system suspend, which requires re-loading upon system
resume.
Once again,I have to guess because there is no comments in the code. Look
at what the TI guys have done in omap_remoteproc.c. Even when I look at their
code for the first time I clearly understand what the driver does, and that
without any knowledge about the HW.
I will stop here for this patchset.
Thanks,
Mathieu
> + if (ret < 0) {
> + dev_err(dev, "load firmware failed: %d\n", ret);
> + goto err;
> + }
> + }
> +
> + return 0;
> +
> +err:
> + pm_runtime_force_suspend(dev);
> +
> + return ret;
> +}
> +
> +static const struct dev_pm_ops imx_dsp_rproc_pm_ops = {
> + SET_SYSTEM_SLEEP_PM_OPS(imx_dsp_suspend, imx_dsp_resume)
> + SET_RUNTIME_PM_OPS(imx_dsp_runtime_suspend,
> + imx_dsp_runtime_resume, NULL)
> +};
> +
> +static const struct of_device_id imx_dsp_rproc_of_match[] = {
> + { .compatible = "fsl,imx8qxp-hifi4", .data = &imx_dsp_rproc_cfg_imx8qxp },
> + { .compatible = "fsl,imx8qm-hifi4", .data = &imx_dsp_rproc_cfg_imx8qm },
> + { .compatible = "fsl,imx8mp-hifi4", .data = &imx_dsp_rproc_cfg_imx8mp },
> + { .compatible = "fsl,imx8ulp-hifi4", .data = &imx_dsp_rproc_cfg_imx8ulp },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, imx_dsp_rproc_of_match);
> +
> +static struct platform_driver imx_dsp_rproc_driver = {
> + .probe = imx_dsp_rproc_probe,
> + .remove = imx_dsp_rproc_remove,
> + .driver = {
> + .name = "imx-dsp-rproc",
> + .of_match_table = imx_dsp_rproc_of_match,
> + .pm = &imx_dsp_rproc_pm_ops,
> + },
> +};
> +module_platform_driver(imx_dsp_rproc_driver);
> +
> +MODULE_LICENSE("GPL v2");
> +MODULE_DESCRIPTION("i.MX HiFi Core Remote Processor Control Driver");
> +MODULE_AUTHOR("Shengjiu Wang <[email protected]>");
> --
> 2.17.1
>
[...]
>
> >
> > > +
> > > +/* address translation table */
> > > +struct imx_dsp_rproc_att {
> > > + u32 da; /* device address (From Cortex M4 view)*/
> > > + u32 sa; /* system bus address */
> > > + u32 size; /* size of reg range */
> > > + int flags;
> > > +};
> >
> > This is already defined in imx_rproc.c - why do we need another definition here?
>
> I just want to avoid to modify imx_rproc.c driver.
> So with this comments, should I add imx_rproc.h for extracting the common
> structure in it?
>
Yes, that is probably the best way to proceed.
> >
> > > +
> > > +/* Remote core start/stop method */
> > > +enum imx_dsp_rproc_method {
> > > + /* Through syscon regmap */
> > > + IMX_DSP_MMIO,
> > > + IMX_DSP_SCU_API,
> > > +};
> >
> > From where I stand it would be worth merging the above with imx_rproc_method
> > found in imx_rproc.c. I don't see a need for duplication.
>
> Should I add imx_rproc.h for extracting the common structure in it?
>
See my comment above.
> >
> > > +
> > > +struct imx_dsp_rproc {
> > > + struct device *dev;
> > > + struct regmap *regmap;
> > > + struct rproc *rproc;
> > > + const struct imx_dsp_rproc_dcfg *dcfg;
> > > + struct clk *clks[DSP_RPROC_CLK_MAX];
> > > + struct mbox_client cl;
> > > + struct mbox_client cl_rxdb;
> > > + struct mbox_chan *tx_ch;
> > > + struct mbox_chan *rx_ch;
> > > + struct mbox_chan *rxdb_ch;
> > > + struct device **pd_dev;
> > > + struct device_link **pd_dev_link;
> > > + struct imx_sc_ipc *ipc_handle;
> > > + struct work_struct rproc_work;
> > > + struct workqueue_struct *workqueue;
> > > + struct completion pm_comp;
> > > + spinlock_t mbox_lock; /* lock for mbox */
> > > + int num_domains;
> > > + u32 flags;
> > > +};
> > > +
> > > +struct imx_dsp_rproc_dcfg {
> > > + u32 src_reg;
> > > + u32 src_mask;
> > > + u32 src_start;
> > > + u32 src_stop;
> > > + const struct imx_dsp_rproc_att *att;
> > > + size_t att_size;
> > > + enum imx_dsp_rproc_method method;
> >
> > The above is similar to imx_rproc_cfg. As such:
> >
> > struct imx_dsp_rproc_dcfg {
> > struct imx_rproc_cfg *dcfg;
> > int (*reset)(struct imx_dsp_rproc *priv);
> > };
> >
>
> Yes, seems need to add imx_rproc.h header file.
>
[...]
> > > +
> > > +/* pm runtime */
> > > +static int imx_dsp_runtime_resume(struct device *dev)
> > > +{
> > > + struct rproc *rproc = dev_get_drvdata(dev);
> > > + struct imx_dsp_rproc *priv = rproc->priv;
> > > + const struct imx_dsp_rproc_dcfg *dcfg = priv->dcfg;
> > > + int ret;
> > > +
> > > + ret = imx_dsp_rproc_mbox_init(priv);
> >
> > Why is the mailbox setup and destroyed with every PM cycle? I find an overall
> > lack of comments makes this driver difficult to review, resulting in having to
> > spend more time to look at and understand the code. I will have to continue
> > tomorrow because, well, I ran out of time.
> >
> > Mathieu
> >
>
> There is power domain attached with mailbox, if request the mailbox
> channel, the power is enabled. so if setup mailbox in probe(), then
> the power is enabled always which is no benefit for saving power.
> so setup mailbox in pm_runtime_resume().
This is the kind of very useful information that should be in comments.
>
> Sorry for lack of comments, I will add more in next version.
That will be much appreciated.
>
> Again, Thanks your time for reviewing this patch.
More comments to come in a minute...
>
> Best regards
> Wang shengjiu
>
> > > + if (ret) {
> > > + dev_err(dev, "failed on imx_dsp_rproc_mbox_init\n");
> > > + return ret;
> > > + }
> > > +
> > > + ret = imx_dsp_rproc_clk_enable(priv);
> > > + if (ret) {
> > > + dev_err(dev, "failed on imx_dsp_rproc_clk_enable\n");
> > > + return ret;
> > > + }
> > > +
> > > + /* reset DSP if needed */
> > > + if (dcfg->reset)
> > > + dcfg->reset(priv);
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +static int imx_dsp_runtime_suspend(struct device *dev)
> > > +{
> > > + struct rproc *rproc = dev_get_drvdata(dev);
> > > + struct imx_dsp_rproc *priv = rproc->priv;
> > > +
> > > + imx_dsp_rproc_clk_disable(priv);
> > > +
> > > + imx_dsp_rproc_free_mbox(priv);
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +static void imx_dsp_load_firmware(const struct firmware *fw, void *context)
> > > +{
> > > + struct rproc *rproc = context;
> > > + int ret;
> > > +
> > > + /* load the ELF segments to memory */
> > > + ret = rproc_load_segments(rproc, fw);
> > > + if (ret)
> > > + goto out;
> > > +
> > > + /* power up the remote processor */
> > > + ret = rproc->ops->start(rproc);
> > > + if (ret)
> > > + goto out;
> > > +
> > > + /* same flow as first start */
> > > + rproc->ops->kick(rproc, 0);
> > > +
> > > +out:
> > > + release_firmware(fw);
> > > +}
> > > +
> > > +static int imx_dsp_suspend(struct device *dev)
> > > +{
> > > + struct rproc *rproc = dev_get_drvdata(dev);
> > > + struct imx_dsp_rproc *priv = rproc->priv;
> > > + __u32 mmsg = RP_MBOX_SUSPEND_SYSTEM;
> > > + int ret;
> > > +
> > > + if (rproc->state == RPROC_RUNNING) {
> > > + reinit_completion(&priv->pm_comp);
> > > +
> > > + ret = mbox_send_message(priv->tx_ch, (void *)&mmsg);
> > > + if (ret < 0) {
> > > + dev_err(dev, "PM mbox_send_message failed: %d\n", ret);
> > > + return ret;
> > > + }
> > > +
> > > + if (!wait_for_completion_timeout(&priv->pm_comp, msecs_to_jiffies(100)))
> > > + return -EBUSY;
> > > + }
> > > +
> > > + return pm_runtime_force_suspend(dev);
> > > +}
> > > +
> > > +static int imx_dsp_resume(struct device *dev)
> > > +{
> > > + struct rproc *rproc = dev_get_drvdata(dev);
> > > + int ret = 0;
> > > +
> > > + ret = pm_runtime_force_resume(dev);
> > > + if (ret)
> > > + return ret;
> > > +
> > > + if (rproc->state == RPROC_RUNNING) {
> > > + /*TODO: load firmware and start */
> > > + ret = request_firmware_nowait(THIS_MODULE,
> > > + FW_ACTION_UEVENT,
> > > + rproc->firmware,
> > > + dev,
> > > + GFP_KERNEL,
> > > + rproc,
> > > + imx_dsp_load_firmware);
> > > + if (ret < 0) {
> > > + dev_err(dev, "load firmware failed: %d\n", ret);
> > > + goto err;
> > > + }
> > > + }
> > > +
> > > + return 0;
> > > +
> > > +err:
> > > + pm_runtime_force_suspend(dev);
> > > +
> > > + return ret;
> > > +}
> > > +
> > > +static const struct dev_pm_ops imx_dsp_rproc_pm_ops = {
> > > + SET_SYSTEM_SLEEP_PM_OPS(imx_dsp_suspend, imx_dsp_resume)
> > > + SET_RUNTIME_PM_OPS(imx_dsp_runtime_suspend,
> > > + imx_dsp_runtime_resume, NULL)
> > > +};
> > > +
> > > +static const struct of_device_id imx_dsp_rproc_of_match[] = {
> > > + { .compatible = "fsl,imx8qxp-hifi4", .data = &imx_dsp_rproc_cfg_imx8qxp },
> > > + { .compatible = "fsl,imx8qm-hifi4", .data = &imx_dsp_rproc_cfg_imx8qm },
> > > + { .compatible = "fsl,imx8mp-hifi4", .data = &imx_dsp_rproc_cfg_imx8mp },
> > > + { .compatible = "fsl,imx8ulp-hifi4", .data = &imx_dsp_rproc_cfg_imx8ulp },
> > > + {},
> > > +};
> > > +MODULE_DEVICE_TABLE(of, imx_dsp_rproc_of_match);
> > > +
> > > +static struct platform_driver imx_dsp_rproc_driver = {
> > > + .probe = imx_dsp_rproc_probe,
> > > + .remove = imx_dsp_rproc_remove,
> > > + .driver = {
> > > + .name = "imx-dsp-rproc",
> > > + .of_match_table = imx_dsp_rproc_of_match,
> > > + .pm = &imx_dsp_rproc_pm_ops,
> > > + },
> > > +};
> > > +module_platform_driver(imx_dsp_rproc_driver);
> > > +
> > > +MODULE_LICENSE("GPL v2");
> > > +MODULE_DESCRIPTION("i.MX HiFi Core Remote Processor Control Driver");
> > > +MODULE_AUTHOR("Shengjiu Wang <[email protected]>");
> > > --
> > > 2.17.1
> > >
On Wed, Sep 1, 2021 at 11:50 PM Mathieu Poirier
<[email protected]> wrote:
>
> [...]
>
> >
> > >
> > > > +
> > > > +/* address translation table */
> > > > +struct imx_dsp_rproc_att {
> > > > + u32 da; /* device address (From Cortex M4 view)*/
> > > > + u32 sa; /* system bus address */
> > > > + u32 size; /* size of reg range */
> > > > + int flags;
> > > > +};
> > >
> > > This is already defined in imx_rproc.c - why do we need another definition here?
> >
> > I just want to avoid to modify imx_rproc.c driver.
> > So with this comments, should I add imx_rproc.h for extracting the common
> > structure in it?
> >
>
> Yes, that is probably the best way to proceed.
Ok, I will do it in the next version.
>
> > >
> > > > +
> > > > +/* Remote core start/stop method */
> > > > +enum imx_dsp_rproc_method {
> > > > + /* Through syscon regmap */
> > > > + IMX_DSP_MMIO,
> > > > + IMX_DSP_SCU_API,
> > > > +};
> > >
> > > From where I stand it would be worth merging the above with imx_rproc_method
> > > found in imx_rproc.c. I don't see a need for duplication.
> >
> > Should I add imx_rproc.h for extracting the common structure in it?
> >
>
> See my comment above.
>
> > >
> > > > +
> > > > +struct imx_dsp_rproc {
> > > > + struct device *dev;
> > > > + struct regmap *regmap;
> > > > + struct rproc *rproc;
> > > > + const struct imx_dsp_rproc_dcfg *dcfg;
> > > > + struct clk *clks[DSP_RPROC_CLK_MAX];
> > > > + struct mbox_client cl;
> > > > + struct mbox_client cl_rxdb;
> > > > + struct mbox_chan *tx_ch;
> > > > + struct mbox_chan *rx_ch;
> > > > + struct mbox_chan *rxdb_ch;
> > > > + struct device **pd_dev;
> > > > + struct device_link **pd_dev_link;
> > > > + struct imx_sc_ipc *ipc_handle;
> > > > + struct work_struct rproc_work;
> > > > + struct workqueue_struct *workqueue;
> > > > + struct completion pm_comp;
> > > > + spinlock_t mbox_lock; /* lock for mbox */
> > > > + int num_domains;
> > > > + u32 flags;
> > > > +};
> > > > +
> > > > +struct imx_dsp_rproc_dcfg {
> > > > + u32 src_reg;
> > > > + u32 src_mask;
> > > > + u32 src_start;
> > > > + u32 src_stop;
> > > > + const struct imx_dsp_rproc_att *att;
> > > > + size_t att_size;
> > > > + enum imx_dsp_rproc_method method;
> > >
> > > The above is similar to imx_rproc_cfg. As such:
> > >
> > > struct imx_dsp_rproc_dcfg {
> > > struct imx_rproc_cfg *dcfg;
> > > int (*reset)(struct imx_dsp_rproc *priv);
> > > };
> > >
> >
> > Yes, seems need to add imx_rproc.h header file.
> >
>
> [...]
>
> > > > +
> > > > +/* pm runtime */
> > > > +static int imx_dsp_runtime_resume(struct device *dev)
> > > > +{
> > > > + struct rproc *rproc = dev_get_drvdata(dev);
> > > > + struct imx_dsp_rproc *priv = rproc->priv;
> > > > + const struct imx_dsp_rproc_dcfg *dcfg = priv->dcfg;
> > > > + int ret;
> > > > +
> > > > + ret = imx_dsp_rproc_mbox_init(priv);
> > >
> > > Why is the mailbox setup and destroyed with every PM cycle? I find an overall
> > > lack of comments makes this driver difficult to review, resulting in having to
> > > spend more time to look at and understand the code. I will have to continue
> > > tomorrow because, well, I ran out of time.
> > >
> > > Mathieu
> > >
> >
> > There is power domain attached with mailbox, if request the mailbox
> > channel, the power is enabled. so if setup mailbox in probe(), then
> > the power is enabled always which is no benefit for saving power.
> > so setup mailbox in pm_runtime_resume().
>
> This is the kind of very useful information that should be in comments.
All right, I will add it in the next version.
>
> >
> > Sorry for lack of comments, I will add more in next version.
>
> That will be much appreciated.
>
> >
> > Again, Thanks your time for reviewing this patch.
>
> More comments to come in a minute...
>
> >
> > Best regards
> > Wang shengjiu
> >
> > > > + if (ret) {
> > > > + dev_err(dev, "failed on imx_dsp_rproc_mbox_init\n");
> > > > + return ret;
> > > > + }
> > > > +
> > > > + ret = imx_dsp_rproc_clk_enable(priv);
> > > > + if (ret) {
> > > > + dev_err(dev, "failed on imx_dsp_rproc_clk_enable\n");
> > > > + return ret;
> > > > + }
> > > > +
> > > > + /* reset DSP if needed */
> > > > + if (dcfg->reset)
> > > > + dcfg->reset(priv);
> > > > +
> > > > + return 0;
> > > > +}
> > > > +
> > > > +static int imx_dsp_runtime_suspend(struct device *dev)
> > > > +{
> > > > + struct rproc *rproc = dev_get_drvdata(dev);
> > > > + struct imx_dsp_rproc *priv = rproc->priv;
> > > > +
> > > > + imx_dsp_rproc_clk_disable(priv);
> > > > +
> > > > + imx_dsp_rproc_free_mbox(priv);
> > > > +
> > > > + return 0;
> > > > +}
> > > > +
> > > > +static void imx_dsp_load_firmware(const struct firmware *fw, void *context)
> > > > +{
> > > > + struct rproc *rproc = context;
> > > > + int ret;
> > > > +
> > > > + /* load the ELF segments to memory */
> > > > + ret = rproc_load_segments(rproc, fw);
> > > > + if (ret)
> > > > + goto out;
> > > > +
> > > > + /* power up the remote processor */
> > > > + ret = rproc->ops->start(rproc);
> > > > + if (ret)
> > > > + goto out;
> > > > +
> > > > + /* same flow as first start */
> > > > + rproc->ops->kick(rproc, 0);
> > > > +
> > > > +out:
> > > > + release_firmware(fw);
> > > > +}
> > > > +
> > > > +static int imx_dsp_suspend(struct device *dev)
> > > > +{
> > > > + struct rproc *rproc = dev_get_drvdata(dev);
> > > > + struct imx_dsp_rproc *priv = rproc->priv;
> > > > + __u32 mmsg = RP_MBOX_SUSPEND_SYSTEM;
> > > > + int ret;
> > > > +
> > > > + if (rproc->state == RPROC_RUNNING) {
> > > > + reinit_completion(&priv->pm_comp);
> > > > +
> > > > + ret = mbox_send_message(priv->tx_ch, (void *)&mmsg);
> > > > + if (ret < 0) {
> > > > + dev_err(dev, "PM mbox_send_message failed: %d\n", ret);
> > > > + return ret;
> > > > + }
> > > > +
> > > > + if (!wait_for_completion_timeout(&priv->pm_comp, msecs_to_jiffies(100)))
> > > > + return -EBUSY;
> > > > + }
> > > > +
> > > > + return pm_runtime_force_suspend(dev);
> > > > +}
> > > > +
> > > > +static int imx_dsp_resume(struct device *dev)
> > > > +{
> > > > + struct rproc *rproc = dev_get_drvdata(dev);
> > > > + int ret = 0;
> > > > +
> > > > + ret = pm_runtime_force_resume(dev);
> > > > + if (ret)
> > > > + return ret;
> > > > +
> > > > + if (rproc->state == RPROC_RUNNING) {
> > > > + /*TODO: load firmware and start */
> > > > + ret = request_firmware_nowait(THIS_MODULE,
> > > > + FW_ACTION_UEVENT,
> > > > + rproc->firmware,
> > > > + dev,
> > > > + GFP_KERNEL,
> > > > + rproc,
> > > > + imx_dsp_load_firmware);
> > > > + if (ret < 0) {
> > > > + dev_err(dev, "load firmware failed: %d\n", ret);
> > > > + goto err;
> > > > + }
> > > > + }
> > > > +
> > > > + return 0;
> > > > +
> > > > +err:
> > > > + pm_runtime_force_suspend(dev);
> > > > +
> > > > + return ret;
> > > > +}
> > > > +
> > > > +static const struct dev_pm_ops imx_dsp_rproc_pm_ops = {
> > > > + SET_SYSTEM_SLEEP_PM_OPS(imx_dsp_suspend, imx_dsp_resume)
> > > > + SET_RUNTIME_PM_OPS(imx_dsp_runtime_suspend,
> > > > + imx_dsp_runtime_resume, NULL)
> > > > +};
> > > > +
> > > > +static const struct of_device_id imx_dsp_rproc_of_match[] = {
> > > > + { .compatible = "fsl,imx8qxp-hifi4", .data = &imx_dsp_rproc_cfg_imx8qxp },
> > > > + { .compatible = "fsl,imx8qm-hifi4", .data = &imx_dsp_rproc_cfg_imx8qm },
> > > > + { .compatible = "fsl,imx8mp-hifi4", .data = &imx_dsp_rproc_cfg_imx8mp },
> > > > + { .compatible = "fsl,imx8ulp-hifi4", .data = &imx_dsp_rproc_cfg_imx8ulp },
> > > > + {},
> > > > +};
> > > > +MODULE_DEVICE_TABLE(of, imx_dsp_rproc_of_match);
> > > > +
> > > > +static struct platform_driver imx_dsp_rproc_driver = {
> > > > + .probe = imx_dsp_rproc_probe,
> > > > + .remove = imx_dsp_rproc_remove,
> > > > + .driver = {
> > > > + .name = "imx-dsp-rproc",
> > > > + .of_match_table = imx_dsp_rproc_of_match,
> > > > + .pm = &imx_dsp_rproc_pm_ops,
> > > > + },
> > > > +};
> > > > +module_platform_driver(imx_dsp_rproc_driver);
> > > > +
> > > > +MODULE_LICENSE("GPL v2");
> > > > +MODULE_DESCRIPTION("i.MX HiFi Core Remote Processor Control Driver");
> > > > +MODULE_AUTHOR("Shengjiu Wang <[email protected]>");
> > > > --
> > > > 2.17.1
> > > >
On Thu, Sep 2, 2021 at 12:22 AM Mathieu Poirier
<[email protected]> wrote:
>
> On Wed, Aug 25, 2021 at 03:28:36PM +0800, Shengjiu Wang wrote:
> > Provide a basic driver to control DSP processor found on NXP i.MX8QM,
> > i.MX8QXP, i.MX8MP and i.MX8ULP.
> >
> > Currently it is able to resolve addresses between DSP and main CPU,
> > start and stop the processor, suspend and resume.
> >
> > The communication between DSP and main CPU is based on mailbox, there
> > are three mailbox channels (tx, rx, rxdb).
> >
> > This driver was tested on NXP i.MX8QM, i.MX8QXP, i.MX8MP and i.MX8ULP.
> >
> > Signed-off-by: Shengjiu Wang <[email protected]>
> > ---
> > changes in v2:
> > - change syscon to fsl,dsp-ctrl
> >
> > drivers/remoteproc/Kconfig | 11 +
> > drivers/remoteproc/Makefile | 1 +
> > drivers/remoteproc/imx_dsp_rproc.c | 1078 ++++++++++++++++++++++++++++
> > 3 files changed, 1090 insertions(+)
> > create mode 100644 drivers/remoteproc/imx_dsp_rproc.c
> >
> > diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig
> > index 9a6eedc3994a..890a14e6f3f9 100644
> > --- a/drivers/remoteproc/Kconfig
> > +++ b/drivers/remoteproc/Kconfig
> > @@ -34,6 +34,17 @@ config IMX_REMOTEPROC
> >
> > It's safe to say N here.
> >
> > +config IMX_DSP_REMOTEPROC
> > + tristate "i.MX DSP remoteproc support"
> > + depends on ARCH_MXC
> > + depends on HAVE_ARM_SMCCC
> > + select MAILBOX
> > + help
> > + Say y here to support iMX's DSP remote processors via the remote
> > + processor framework.
> > +
> > + It's safe to say N here.
> > +
> > config INGENIC_VPU_RPROC
> > tristate "Ingenic JZ47xx VPU remoteproc support"
> > depends on MIPS || COMPILE_TEST
> > diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile
> > index bb26c9e4ef9c..37d5cb1c04bf 100644
> > --- a/drivers/remoteproc/Makefile
> > +++ b/drivers/remoteproc/Makefile
> > @@ -12,6 +12,7 @@ remoteproc-y += remoteproc_virtio.o
> > remoteproc-y += remoteproc_elf_loader.o
> > obj-$(CONFIG_REMOTEPROC_CDEV) += remoteproc_cdev.o
> > obj-$(CONFIG_IMX_REMOTEPROC) += imx_rproc.o
> > +obj-$(CONFIG_IMX_DSP_REMOTEPROC) += imx_dsp_rproc.o
> > obj-$(CONFIG_INGENIC_VPU_RPROC) += ingenic_rproc.o
> > obj-$(CONFIG_MTK_SCP) += mtk_scp.o mtk_scp_ipi.o
> > obj-$(CONFIG_OMAP_REMOTEPROC) += omap_remoteproc.o
> > diff --git a/drivers/remoteproc/imx_dsp_rproc.c b/drivers/remoteproc/imx_dsp_rproc.c
> > new file mode 100644
> > index 000000000000..ce0596694122
> > --- /dev/null
> > +++ b/drivers/remoteproc/imx_dsp_rproc.c
> > @@ -0,0 +1,1078 @@
> > +// SPDX-License-Identifier: GPL-2.0-only
> > +// Copyright 2021 NXP
> > +
> > +#include <linux/clk.h>
> > +#include <linux/err.h>
> > +#include <linux/interrupt.h>
> > +#include <linux/kernel.h>
> > +#include <linux/mailbox_client.h>
> > +#include <linux/mfd/syscon.h>
> > +#include <linux/module.h>
> > +#include <linux/of_address.h>
> > +#include <linux/of_reserved_mem.h>
> > +#include <linux/of_device.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/pm_domain.h>
> > +#include <linux/regmap.h>
> > +#include <linux/remoteproc.h>
> > +#include <linux/slab.h>
> > +#include <linux/pm_runtime.h>
> > +#include <linux/workqueue.h>
> > +#include <linux/firmware/imx/sci.h>
> > +#include <dt-bindings/firmware/imx/rsrc.h>
> > +#include <linux/arm-smccc.h>
> > +
> > +#include "remoteproc_internal.h"
> > +#include "remoteproc_elf_helpers.h"
> > +
> > +enum imx_dsp_rp_mbox_messages {
> > + RP_MBOX_SUSPEND_SYSTEM = 0xFF11,
> > + RP_MBOX_SUSPEND_ACK = 0xFF12,
> > + RP_MBOX_RESUME_SYSTEM = 0xFF13,
> > + RP_MBOX_RESUME_ACK = 0xFF14,
> > +};
> > +
> > +#define DSP_RPROC_CLK_MAX 32
> > +
> > +#define REMOTE_IS_READY BIT(0)
> > +#define REMOTE_READY_WAIT_MAX_RETRIES 500
> > +
> > +/* att flags */
> > +/* DSP own area. Can be mapped at probe */
> > +#define ATT_OWN BIT(31)
> > +#define ATT_IRAM BIT(30)
> > +
> > +/* i.MX8MP */
> > +/* DAP registers */
> > +#define IMX8M_DAP_DEBUG 0x28800000
> > +#define IMX8M_DAP_DEBUG_SIZE (64 * 1024)
> > +#define IMX8M_DAP_PWRCTL (0x4000 + 0x3020)
> > +#define IMX8M_PWRCTL_CORERESET BIT(16)
> > +
> > +/* DSP audio mix registers */
> > +#define IMX8M_AudioDSP_REG0 0x100
> > +#define IMX8M_AudioDSP_REG1 0x104
> > +#define IMX8M_AudioDSP_REG2 0x108
> > +#define IMX8M_AudioDSP_REG3 0x10c
> > +
> > +#define IMX8M_AudioDSP_REG2_RUNSTALL BIT(5)
> > +#define IMX8M_AudioDSP_REG2_PWAITMODE BIT(1)
> > +
> > +/* i.MX8ULP */
> > +#define IMX8ULP_SIM_LPAV_REG_SYSCTRL0 0x8
> > +#define IMX8ULP_SYSCTRL0_DSP_DBG_RST BIT(25)
> > +#define IMX8ULP_SYSCTRL0_DSP_PLAT_CLK_EN BIT(19)
> > +#define IMX8ULP_SYSCTRL0_DSP_PBCLK_EN BIT(18)
> > +#define IMX8ULP_SYSCTRL0_DSP_CLK_EN BIT(17)
> > +#define IMX8ULP_SYSCTRL0_DSP_RST BIT(16)
> > +#define IMX8ULP_SYSCTRL0_DSP_OCD_HALT BIT(14)
> > +#define IMX8ULP_SYSCTRL0_DSP_STALL BIT(13)
> > +
> > +#define IMX8ULP_SIP_HIFI_XRDC 0xc200000e
> > +
> > +/* address translation table */
> > +struct imx_dsp_rproc_att {
> > + u32 da; /* device address (From Cortex M4 view)*/
> > + u32 sa; /* system bus address */
> > + u32 size; /* size of reg range */
> > + int flags;
> > +};
> > +
> > +/* Remote core start/stop method */
> > +enum imx_dsp_rproc_method {
> > + /* Through syscon regmap */
> > + IMX_DSP_MMIO,
> > + IMX_DSP_SCU_API,
> > +};
> > +
> > +struct imx_dsp_rproc {
> > + struct device *dev;
> > + struct regmap *regmap;
> > + struct rproc *rproc;
> > + const struct imx_dsp_rproc_dcfg *dcfg;
> > + struct clk *clks[DSP_RPROC_CLK_MAX];
> > + struct mbox_client cl;
> > + struct mbox_client cl_rxdb;
> > + struct mbox_chan *tx_ch;
> > + struct mbox_chan *rx_ch;
> > + struct mbox_chan *rxdb_ch;
> > + struct device **pd_dev;
> > + struct device_link **pd_dev_link;
> > + struct imx_sc_ipc *ipc_handle;
> > + struct work_struct rproc_work;
> > + struct workqueue_struct *workqueue;
> > + struct completion pm_comp;
> > + spinlock_t mbox_lock; /* lock for mbox */
> > + int num_domains;
> > + u32 flags;
> > +};
> > +
> > +struct imx_dsp_rproc_dcfg {
> > + u32 src_reg;
> > + u32 src_mask;
> > + u32 src_start;
> > + u32 src_stop;
> > + const struct imx_dsp_rproc_att *att;
> > + size_t att_size;
> > + enum imx_dsp_rproc_method method;
> > + int (*reset)(struct imx_dsp_rproc *priv);
> > +};
> > +
> > +static const struct imx_dsp_rproc_att imx_dsp_rproc_att_imx8qm[] = {
> > + /* dev addr , sys addr , size , flags */
> > + { 0x596e8000, 0x556e8000, 0x00008000, ATT_OWN },
> > + { 0x596f0000, 0x556f0000, 0x00008000, ATT_OWN },
> > + { 0x596f8000, 0x556f8000, 0x00000800, ATT_OWN | ATT_IRAM},
> > + { 0x55700000, 0x55700000, 0x00070000, ATT_OWN },
> > + /* DDR (Data) */
> > + { 0x80000000, 0x80000000, 0x60000000, 0},
> > +};
> > +
> > +static const struct imx_dsp_rproc_att imx_dsp_rproc_att_imx8qxp[] = {
> > + /* dev addr , sys addr , size , flags */
> > + { 0x596e8000, 0x596e8000, 0x00008000, ATT_OWN },
> > + { 0x596f0000, 0x596f0000, 0x00008000, ATT_OWN },
> > + { 0x596f8000, 0x596f8000, 0x00000800, ATT_OWN | ATT_IRAM},
> > + { 0x59700000, 0x59700000, 0x00070000, ATT_OWN },
> > + /* DDR (Data) */
> > + { 0x80000000, 0x80000000, 0x60000000, 0},
> > +};
> > +
> > +static const struct imx_dsp_rproc_att imx_dsp_rproc_att_imx8mp[] = {
> > + /* dev addr , sys addr , size , flags */
> > + { 0x3b6e8000, 0x3b6e8000, 0x00008000, ATT_OWN },
> > + { 0x3b6f0000, 0x3b6f0000, 0x00008000, ATT_OWN },
> > + { 0x3b6f8000, 0x3b6f8000, 0x00000800, ATT_OWN | ATT_IRAM},
> > + { 0x3b700000, 0x3b700000, 0x00040000, ATT_OWN },
> > + /* DDR (Data) */
> > + { 0x40000000, 0x40000000, 0x80000000, 0},
> > +};
> > +
> > +static const struct imx_dsp_rproc_att imx_dsp_rproc_att_imx8ulp[] = {
> > + /* dev addr , sys addr , size , flags */
> > + { 0x21170000, 0x21170000, 0x00010000, ATT_OWN | ATT_IRAM},
> > + { 0x21180000, 0x21180000, 0x00010000, ATT_OWN },
> > + /* DDR (Data) */
> > + { 0x0c000000, 0x80000000, 0x10000000, 0},
> > + { 0x30000000, 0x90000000, 0x10000000, 0},
> > +};
> > +
> > +static int imx8mp_dsp_reset(struct imx_dsp_rproc *priv)
> > +{
> > + void __iomem *dap = ioremap_wc(IMX8M_DAP_DEBUG, IMX8M_DAP_DEBUG_SIZE);
> > + int pwrctl;
> > +
> > + /* put DSP into reset and stall */
> > + pwrctl = readl(dap + IMX8M_DAP_PWRCTL);
> > + pwrctl |= IMX8M_PWRCTL_CORERESET;
> > + writel(pwrctl, dap + IMX8M_DAP_PWRCTL);
> > +
> > + /* keep reset asserted for 10 cycles */
> > + usleep_range(1, 2);
> > +
> > + regmap_update_bits(priv->regmap, IMX8M_AudioDSP_REG2,
> > + IMX8M_AudioDSP_REG2_RUNSTALL,
> > + IMX8M_AudioDSP_REG2_RUNSTALL);
> > +
> > + /* take the DSP out of reset and keep stalled for FW loading */
> > + pwrctl = readl(dap + IMX8M_DAP_PWRCTL);
> > + pwrctl &= ~IMX8M_PWRCTL_CORERESET;
> > + writel(pwrctl, dap + IMX8M_DAP_PWRCTL);
> > +
> > + iounmap(dap);
> > + return 0;
> > +}
> > +
> > +static int imx8ulp_dsp_reset(struct imx_dsp_rproc *priv)
> > +{
> > + struct arm_smccc_res res;
> > +
> > + regmap_update_bits(priv->regmap, IMX8ULP_SIM_LPAV_REG_SYSCTRL0,
> > + IMX8ULP_SYSCTRL0_DSP_RST, IMX8ULP_SYSCTRL0_DSP_RST);
> > + regmap_update_bits(priv->regmap, IMX8ULP_SIM_LPAV_REG_SYSCTRL0,
> > + IMX8ULP_SYSCTRL0_DSP_STALL,
> > + IMX8ULP_SYSCTRL0_DSP_STALL);
> > +
> > + arm_smccc_smc(IMX8ULP_SIP_HIFI_XRDC, 0, 0, 0, 0, 0, 0, 0, &res);
> > +
> > + regmap_update_bits(priv->regmap, IMX8ULP_SIM_LPAV_REG_SYSCTRL0,
> > + IMX8ULP_SYSCTRL0_DSP_RST, 0);
> > + regmap_update_bits(priv->regmap, IMX8ULP_SIM_LPAV_REG_SYSCTRL0,
> > + IMX8ULP_SYSCTRL0_DSP_DBG_RST, 0);
> > +
> > + return 0;
> > +}
> > +
> > +static const struct imx_dsp_rproc_dcfg imx_dsp_rproc_cfg_imx8mp = {
> > + .src_reg = IMX8M_AudioDSP_REG2,
> > + .src_mask = IMX8M_AudioDSP_REG2_RUNSTALL,
> > + .src_start = 0,
> > + .src_stop = IMX8M_AudioDSP_REG2_RUNSTALL,
> > + .att = imx_dsp_rproc_att_imx8mp,
> > + .att_size = ARRAY_SIZE(imx_dsp_rproc_att_imx8mp),
> > + .method = IMX_DSP_MMIO,
> > + .reset = imx8mp_dsp_reset,
> > +};
> > +
> > +static const struct imx_dsp_rproc_dcfg imx_dsp_rproc_cfg_imx8ulp = {
> > + .src_reg = IMX8ULP_SIM_LPAV_REG_SYSCTRL0,
> > + .src_mask = IMX8ULP_SYSCTRL0_DSP_STALL,
> > + .src_start = 0,
> > + .src_stop = IMX8ULP_SYSCTRL0_DSP_STALL,
> > + .att = imx_dsp_rproc_att_imx8ulp,
> > + .att_size = ARRAY_SIZE(imx_dsp_rproc_att_imx8ulp),
> > + .method = IMX_DSP_MMIO,
> > + .reset = imx8ulp_dsp_reset,
> > +};
> > +
> > +static const struct imx_dsp_rproc_dcfg imx_dsp_rproc_cfg_imx8qxp = {
> > + .att = imx_dsp_rproc_att_imx8qxp,
> > + .att_size = ARRAY_SIZE(imx_dsp_rproc_att_imx8qxp),
> > + .method = IMX_DSP_SCU_API,
> > +};
> > +
> > +static const struct imx_dsp_rproc_dcfg imx_dsp_rproc_cfg_imx8qm = {
> > + .att = imx_dsp_rproc_att_imx8qm,
> > + .att_size = ARRAY_SIZE(imx_dsp_rproc_att_imx8qm),
> > + .method = IMX_DSP_SCU_API,
> > +};
> > +
> > +static int imx_dsp_rproc_ready(struct rproc *rproc)
> > +{
> > + struct imx_dsp_rproc *priv = rproc->priv;
> > + int i;
> > +
> > + if (!priv->rxdb_ch)
> > + return 0;
> > +
> > + for (i = 0; i < REMOTE_READY_WAIT_MAX_RETRIES; i++) {
> > + if (priv->flags & REMOTE_IS_READY)
> > + return 0;
> > + usleep_range(100, 200);
> > + }
> > +
> > + return -ETIMEDOUT;
> > +}
> > +
> > +static int imx_dsp_rproc_start(struct rproc *rproc)
> > +{
> > + struct imx_dsp_rproc *priv = rproc->priv;
> > + const struct imx_dsp_rproc_dcfg *dcfg = priv->dcfg;
> > + struct device *dev = priv->dev;
> > + int ret;
> > +
> > + switch (dcfg->method) {
> > + case IMX_DSP_MMIO:
> > + ret = regmap_update_bits(priv->regmap,
> > + dcfg->src_reg,
> > + dcfg->src_mask,
> > + dcfg->src_start);
> > + break;
> > + case IMX_DSP_SCU_API:
> > + ret = imx_sc_pm_cpu_start(priv->ipc_handle,
> > + IMX_SC_R_DSP,
> > + true,
> > + rproc->bootaddr);
> > + break;
> > + default:
> > + return -EOPNOTSUPP;
> > + }
> > +
> > + if (ret)
> > + dev_err(dev, "Failed to enable remote core!\n");
> > + else
> > + ret = imx_dsp_rproc_ready(rproc);
> > +
> > + return ret;
> > +}
> > +
> > +static int imx_dsp_rproc_stop(struct rproc *rproc)
> > +{
> > + struct imx_dsp_rproc *priv = rproc->priv;
> > + const struct imx_dsp_rproc_dcfg *dcfg = priv->dcfg;
> > + struct device *dev = priv->dev;
> > + int ret = 0;
> > +
> > + if (rproc->state == RPROC_CRASHED) {
> > + priv->flags &= ~REMOTE_IS_READY;
> > + return 0;
> > + }
> > +
> > + switch (dcfg->method) {
> > + case IMX_DSP_MMIO:
> > + ret = regmap_update_bits(priv->regmap, dcfg->src_reg, dcfg->src_mask,
> > + dcfg->src_stop);
> > + break;
> > + case IMX_DSP_SCU_API:
> > + ret = imx_sc_pm_cpu_start(priv->ipc_handle,
> > + IMX_SC_R_DSP,
> > + false,
> > + rproc->bootaddr);
> > + break;
> > + default:
> > + return -EOPNOTSUPP;
> > + }
> > +
> > + if (ret)
> > + dev_err(dev, "Failed to stop remote core\n");
> > + else
> > + priv->flags &= ~REMOTE_IS_READY;
> > +
> > + return ret;
> > +}
> > +
> > +static int imx_dsp_rproc_sys_to_da(struct imx_dsp_rproc *priv, u64 sys,
> > + size_t len, u64 *da)
> > +{
> > + const struct imx_dsp_rproc_dcfg *dcfg = priv->dcfg;
> > + int i;
> > +
> > + /* parse address translation table */
> > + for (i = 0; i < dcfg->att_size; i++) {
> > + const struct imx_dsp_rproc_att *att = &dcfg->att[i];
> > +
> > + if (sys >= att->sa && sys + len <= att->sa + att->size) {
> > + unsigned int offset = sys - att->sa;
> > +
> > + *da = att->da + offset;
> > + return 0;
> > + }
> > + }
> > +
> > + return -ENOENT;
> > +}
> > +
> > +static void imx_dsp_rproc_vq_work(struct work_struct *work)
> > +{
> > + struct imx_dsp_rproc *priv = container_of(work, struct imx_dsp_rproc,
> > + rproc_work);
> > +
> > + rproc_vq_interrupt(priv->rproc, 0);
> > + rproc_vq_interrupt(priv->rproc, 1);
> > +}
> > +
> > +static void imx_dsp_rproc_rx_callback(struct mbox_client *cl, void *data)
> > +{
> > + struct rproc *rproc = dev_get_drvdata(cl->dev);
> > + struct imx_dsp_rproc *priv = rproc->priv;
> > + u32 message = (u32)(*(u32 *)data);
> > +
> > + dev_dbg(priv->dev, "mbox msg: 0x%x\n", message);
> > +
> > + switch (message) {
> > + case RP_MBOX_SUSPEND_ACK:
> > + complete(&priv->pm_comp);
> > + break;
> > + case RP_MBOX_RESUME_ACK:
> > + complete(&priv->pm_comp);
> > + break;
> > + default:
> > + queue_work(priv->workqueue, &priv->rproc_work);
> > + break;
> > + }
> > +}
> > +
> > +static void imx_dsp_rproc_rxdb_callback(struct mbox_client *cl, void *msg)
> > +{
> > + struct rproc *rproc = dev_get_drvdata(cl->dev);
> > + struct imx_dsp_rproc *priv = rproc->priv;
> > + unsigned long flags;
> > +
> > + spin_lock_irqsave(&priv->mbox_lock, flags);
> > + priv->flags |= REMOTE_IS_READY;
> > + spin_unlock_irqrestore(&priv->mbox_lock, flags);
> > +}
> > +
> > +static int imx_dsp_rproc_mbox_init(struct imx_dsp_rproc *priv)
> > +{
> > + struct device *dev = priv->dev;
> > + struct mbox_client *cl;
> > + int ret;
> > +
> > + if (!of_get_property(dev->of_node, "mbox-names", NULL))
> > + return 0;
> > +
> > + spin_lock_init(&priv->mbox_lock);
> > +
> > + cl = &priv->cl;
> > + cl->dev = dev;
> > + cl->tx_block = true;
> > + cl->tx_tout = 100;
> > + cl->knows_txdone = false;
> > + cl->rx_callback = imx_dsp_rproc_rx_callback;
> > +
> > + priv->tx_ch = mbox_request_channel_byname(cl, "tx");
> > + if (IS_ERR(priv->tx_ch)) {
> > + ret = PTR_ERR(priv->tx_ch);
> > + dev_dbg(cl->dev, "failed to request tx mailbox channel: %d\n",
> > + ret);
> > + goto err_out;
> > + }
> > +
> > + priv->rx_ch = mbox_request_channel_byname(cl, "rx");
> > + if (IS_ERR(priv->rx_ch)) {
> > + ret = PTR_ERR(priv->rx_ch);
> > + dev_dbg(cl->dev, "failed to request rx mailbox channel: %d\n",
> > + ret);
> > + goto err_out;
> > + }
> > +
> > + cl = &priv->cl_rxdb;
> > + cl->dev = dev;
> > + cl->rx_callback = imx_dsp_rproc_rxdb_callback;
> > +
> > + /*
> > + * RX door bell is used to receive the ready signal from remote
> > + * after the partition reset of A core.
> > + */
> > + priv->rxdb_ch = mbox_request_channel_byname(cl, "rxdb");
> > + if (IS_ERR(priv->rxdb_ch)) {
> > + ret = PTR_ERR(priv->rxdb_ch);
> > + dev_dbg(cl->dev, "failed to request mbox chan rxdb, ret %d\n",
> > + ret);
> > + goto err_out;
> > + }
> > +
> > + return 0;
> > +
> > +err_out:
> > + if (!IS_ERR(priv->tx_ch))
> > + mbox_free_channel(priv->tx_ch);
> > + if (!IS_ERR(priv->rx_ch))
> > + mbox_free_channel(priv->rx_ch);
> > + if (!IS_ERR(priv->rxdb_ch))
> > + mbox_free_channel(priv->rxdb_ch);
> > +
> > + return ret;
> > +}
> > +
> > +static void imx_dsp_rproc_free_mbox(struct imx_dsp_rproc *priv)
> > +{
> > + mbox_free_channel(priv->tx_ch);
> > + mbox_free_channel(priv->rx_ch);
> > + mbox_free_channel(priv->rxdb_ch);
> > +}
> > +
> > +static int imx_dsp_rproc_add_carveout(struct imx_dsp_rproc *priv)
> > +{
> > + const struct imx_dsp_rproc_dcfg *dcfg = priv->dcfg;
> > + struct rproc *rproc = priv->rproc;
> > + struct device *dev = priv->dev;
> > + struct device_node *np = dev->of_node;
> > + struct of_phandle_iterator it;
> > + struct rproc_mem_entry *mem;
> > + struct reserved_mem *rmem;
> > + void __iomem *cpu_addr;
> > + int a;
> > + u64 da;
> > +
> > + /* remap required addresses */
> > + for (a = 0; a < dcfg->att_size; a++) {
> > + const struct imx_dsp_rproc_att *att = &dcfg->att[a];
> > +
> > + if (!(att->flags & ATT_OWN))
> > + continue;
> > +
> > + if (imx_dsp_rproc_sys_to_da(priv, att->sa, att->size, &da))
> > + return -EINVAL;
> > +
> > + cpu_addr = devm_ioremap_wc(dev, att->sa, att->size);
> > +
> > + /* Register memory region */
> > + mem = rproc_mem_entry_init(dev, cpu_addr, (dma_addr_t)att->sa,
> > + att->size, da,
> > + NULL,
> > + NULL,
> > + "dsp_mem");
> > +
> > + if (mem)
> > + rproc_coredump_add_segment(rproc, da, att->size);
> > + else
> > + return -ENOMEM;
> > +
> > + rproc_add_carveout(rproc, mem);
> > + }
> > +
> > + of_phandle_iterator_init(&it, np, "memory-region", NULL, 0);
> > + while (of_phandle_iterator_next(&it) == 0) {
> > + /*
> > + * Ignore the first memory region which will be used vdev buffer.
> > + * No need to do extra handlings, rproc_add_virtio_dev will handle it.
> > + */
> > + if (!strcmp(it.node->name, "vdev0buffer"))
> > + continue;
> > +
> > + rmem = of_reserved_mem_lookup(it.node);
> > + if (!rmem) {
> > + dev_err(dev, "unable to acquire memory-region\n");
> > + return -EINVAL;
> > + }
> > +
> > + if (imx_dsp_rproc_sys_to_da(priv, rmem->base, rmem->size, &da))
> > + return -EINVAL;
> > +
> > + cpu_addr = devm_ioremap_wc(dev, rmem->base, rmem->size);
> > +
> > + /* Register memory region */
> > + mem = rproc_mem_entry_init(dev, cpu_addr, (dma_addr_t)rmem->base,
> > + rmem->size, da,
> > + NULL,
> > + NULL,
> > + it.node->name);
> > +
> > + if (mem)
> > + rproc_coredump_add_segment(rproc, da, rmem->size);
> > + else
> > + return -ENOMEM;
> > +
> > + rproc_add_carveout(rproc, mem);
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +/*
> > + * imx_dsp_rproc_elf_load_segments() specially check if memsz is zero
> > + * or not.
> > + */
> > +static int imx_dsp_rproc_elf_load_segments(struct rproc *rproc,
> > + const struct firmware *fw)
> > +{
> > + struct device *dev = &rproc->dev;
> > + u8 class = fw_elf_get_class(fw);
> > + u32 elf_phdr_get_size = elf_size_of_phdr(class);
> > + const u8 *elf_data = fw->data;
> > + const void *ehdr, *phdr;
> > + int i, ret = 0;
> > + u16 phnum;
> > +
> > + ehdr = elf_data;
> > + phnum = elf_hdr_get_e_phnum(class, ehdr);
> > + phdr = elf_data + elf_hdr_get_e_phoff(class, ehdr);
> > +
> > + /* go through the available ELF segments */
> > + for (i = 0; i < phnum; i++, phdr += elf_phdr_get_size) {
> > + u64 da = elf_phdr_get_p_paddr(class, phdr);
> > + u64 memsz = elf_phdr_get_p_memsz(class, phdr);
> > + u64 filesz = elf_phdr_get_p_filesz(class, phdr);
> > + u64 offset = elf_phdr_get_p_offset(class, phdr);
> > + u32 type = elf_phdr_get_p_type(class, phdr);
> > + void *ptr;
> > + bool is_iomem;
> > +
> > + if (type != PT_LOAD || !memsz)
> > + continue;
> > +
> > + dev_dbg(dev, "phdr: type %d da 0x%llx memsz 0x%llx filesz 0x%llx\n",
> > + type, da, memsz, filesz);
> > +
> > + if (filesz > memsz) {
> > + dev_err(dev, "bad phdr filesz 0x%llx memsz 0x%llx\n",
> > + filesz, memsz);
> > + ret = -EINVAL;
> > + break;
> > + }
> > +
> > + if (offset + filesz > fw->size) {
> > + dev_err(dev, "truncated fw: need 0x%llx avail 0x%zx\n",
> > + offset + filesz, fw->size);
> > + ret = -EINVAL;
> > + break;
> > + }
> > +
> > + if (!rproc_u64_fit_in_size_t(memsz)) {
> > + dev_err(dev, "size (%llx) does not fit in size_t type\n",
> > + memsz);
> > + ret = -EOVERFLOW;
> > + break;
> > + }
> > +
> > + /* grab the kernel address for this device address */
> > + ptr = rproc_da_to_va(rproc, da, memsz, &is_iomem);
> > + if (!ptr) {
> > + dev_err(dev, "bad phdr da 0x%llx mem 0x%llx\n", da,
> > + memsz);
> > + ret = -EINVAL;
> > + break;
> > + }
> > +
> > + /* put the segment where the remote processor expects it */
> > + if (filesz)
> > + memcpy(ptr, elf_data + offset, filesz);
> > +
> > + /*
> > + * Zero out remaining memory for this segment.
> > + *
> > + * This isn't strictly required since dma_alloc_coherent already
> > + * did this for us. albeit harmless, we may consider removing
> > + * this.
> > + */
> > + if (memsz > filesz)
> > + memset(ptr + filesz, 0, memsz - filesz);
> > + }
> > +
> > + return ret;
> > +}
> > +
> > +static int imx_dsp_rproc_prepare(struct rproc *rproc)
> > +{
> > + struct imx_dsp_rproc *priv = rproc->priv;
> > + struct device *dev = priv->dev;
> > + struct rproc_mem_entry *carveout;
> > + int ret;
> > +
> > + ret = imx_dsp_rproc_add_carveout(priv);
> > + if (ret) {
> > + dev_err(dev, "failed on imx_dsp_rproc_add_carveout\n");
> > + return ret;
> > + }
> > +
> > + pm_runtime_get_sync(dev);
> > +
> > + /* clear buffers */
> > + list_for_each_entry(carveout, &rproc->carveouts, node) {
> > + if (carveout->va)
> > + memset(carveout->va, 0, carveout->len);
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int imx_dsp_rproc_unprepare(struct rproc *rproc)
> > +{
> > + struct imx_dsp_rproc *priv = rproc->priv;
> > +
> > + pm_runtime_put_sync(priv->dev);
> > +
> > + return 0;
> > +}
> > +
> > +static void imx_dsp_rproc_kick(struct rproc *rproc, int vqid)
> > +{
> > + struct imx_dsp_rproc *priv = rproc->priv;
> > + int err;
> > + __u32 mmsg;
> > +
> > + if (!priv->tx_ch) {
> > + dev_err(priv->dev, "No initialized mbox tx channel\n");
> > + return;
> > + }
> > +
> > + /*
> > + * Send the index of the triggered virtqueue as the mu payload.
> > + * Let remote processor know which virtqueue is used.
> > + */
> > + mmsg = vqid;
> > +
> > + err = mbox_send_message(priv->tx_ch, (void *)&mmsg);
> > + if (err < 0)
> > + dev_err(priv->dev, "%s: failed (%d, err:%d)\n",
> > + __func__, vqid, err);
> > +}
> > +
> > +static const struct rproc_ops imx_dsp_rproc_ops = {
> > + .prepare = imx_dsp_rproc_prepare,
> > + .unprepare = imx_dsp_rproc_unprepare,
> > + .start = imx_dsp_rproc_start,
> > + .stop = imx_dsp_rproc_stop,
> > + .kick = imx_dsp_rproc_kick,
> > + .load = imx_dsp_rproc_elf_load_segments,
> > + .parse_fw = rproc_elf_load_rsc_table,
> > + .sanity_check = rproc_elf_sanity_check,
> > + .get_boot_addr = rproc_elf_get_boot_addr,
> > +};
> > +
> > +static int imx_dsp_attach_pm_domains(struct imx_dsp_rproc *priv)
> > +{
> > + struct device *dev = priv->dev;
> > + int ret, i;
> > +
> > + priv->num_domains = of_count_phandle_with_args(dev->of_node,
> > + "power-domains",
> > + "#power-domain-cells");
> > + if (priv->num_domains <= 1)
> > + return 0;
> > +
> > + priv->pd_dev = devm_kmalloc_array(dev, priv->num_domains,
> > + sizeof(*priv->pd_dev),
> > + GFP_KERNEL);
> > + if (!priv->pd_dev)
> > + return -ENOMEM;
> > +
> > + priv->pd_dev_link = devm_kmalloc_array(dev, priv->num_domains,
> > + sizeof(*priv->pd_dev_link),
> > + GFP_KERNEL);
> > + if (!priv->pd_dev_link)
> > + return -ENOMEM;
> > +
> > + for (i = 0; i < priv->num_domains; i++) {
> > + priv->pd_dev[i] = dev_pm_domain_attach_by_id(dev, i);
> > + if (IS_ERR(priv->pd_dev[i]))
> > + return PTR_ERR(priv->pd_dev[i]);
> > +
> > + priv->pd_dev_link[i] = device_link_add(dev,
> > + priv->pd_dev[i],
> > + DL_FLAG_STATELESS |
> > + DL_FLAG_PM_RUNTIME |
> > + DL_FLAG_RPM_ACTIVE);
> > + if (IS_ERR(priv->pd_dev_link[i])) {
> > + dev_pm_domain_detach(priv->pd_dev[i], false);
> > + ret = PTR_ERR(priv->pd_dev_link[i]);
> > + goto detach_pm;
> > + }
> > + }
> > +
> > + return 0;
> > +
> > +detach_pm:
> > + while (--i >= 0) {
> > + device_link_del(priv->pd_dev_link[i]);
> > + dev_pm_domain_detach(priv->pd_dev[i], false);
> > + }
> > +
> > + return ret;
> > +}
> > +
> > +static int imx_dsp_detach_pm_domains(struct imx_dsp_rproc *priv)
> > +{
> > + int i;
> > +
> > + if (priv->num_domains <= 1)
> > + return 0;
> > +
> > + for (i = 0; i < priv->num_domains; i++) {
> > + device_link_del(priv->pd_dev_link[i]);
> > + dev_pm_domain_detach(priv->pd_dev[i], false);
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int imx_dsp_rproc_detect_mode(struct imx_dsp_rproc *priv)
> > +{
> > + const struct imx_dsp_rproc_dcfg *dcfg = priv->dcfg;
> > + struct device *dev = priv->dev;
> > + struct regmap *regmap;
> > + int ret = 0;
> > +
> > + switch (dcfg->method) {
> > + case IMX_DSP_SCU_API:
> > + ret = imx_scu_get_handle(&priv->ipc_handle);
> > + if (ret)
> > + return ret;
> > + return 0;
> > + case IMX_DSP_MMIO:
> > + regmap = syscon_regmap_lookup_by_phandle(dev->of_node, "fsl,dsp-ctrl");
> > + if (IS_ERR(regmap)) {
> > + dev_err(dev, "failed to find syscon\n");
> > + return PTR_ERR(regmap);
> > + }
> > +
> > + priv->regmap = regmap;
> > + default:
> > + break;
> > + }
> > +
> > + return ret;
> > +}
> > +
> > +static const char *imx_dsp_clks_names[DSP_RPROC_CLK_MAX] = {
> > + /* DSP clocks */
> > + "dsp_clk1", "dsp_clk2", "dsp_clk3", "dsp_clk4", "dsp_clk5", "dsp_clk6",
> > + "dsp_clk7", "dsp_clk8",
> > +
> > + /* Peripheral clocks */
> > + "per_clk1", "per_clk2", "per_clk3", "per_clk4", "per_clk5", "per_clk6",
> > + "per_clk7", "per_clk8", "per_clk9", "per_clk10", "per_clk11", "per_clk12",
> > + "per_clk13", "per_clk14", "per_clk15", "per_clk16", "per_clk17", "per_clk18",
> > +};
> > +
> > +static int imx_dsp_rproc_clk_get(struct imx_dsp_rproc *priv)
> > +{
> > + int i;
> > +
> > + for (i = 0; i < DSP_RPROC_CLK_MAX; i++) {
> > + priv->clks[i] = devm_clk_get_optional(priv->dev,
> > + imx_dsp_clks_names[i]);
> > + if (IS_ERR(priv->clks[i])) {
> > + dev_err(priv->dev, "Failed to get clock %s\n",
> > + imx_dsp_clks_names[i]);
> > + return PTR_ERR(priv->clks[i]);
> > + }
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int imx_dsp_rproc_clk_enable(struct imx_dsp_rproc *priv)
> > +{
> > + int i, ret;
> > +
> > + for (i = 0; i < DSP_RPROC_CLK_MAX; i++) {
> > + ret = clk_prepare_enable(priv->clks[i]);
> > + if (ret < 0) {
> > + dev_err(priv->dev, "Failed to enable clk %s\n",
> > + imx_dsp_clks_names[i]);
> > + goto err_dsp_clks;
> > + }
> > + }
> > +
> > + return 0;
> > +
> > +err_dsp_clks:
> > + while (--i >= 0)
> > + clk_disable_unprepare(priv->clks[i]);
> > +
> > + return ret;
> > +}
> > +
> > +static void imx_dsp_rproc_clk_disable(struct imx_dsp_rproc *priv)
> > +{
> > + int i;
> > +
> > + for (i = 0; i < DSP_RPROC_CLK_MAX; i++)
> > + clk_disable_unprepare(priv->clks[i]);
> > +}
> > +
> > +static int imx_dsp_rproc_probe(struct platform_device *pdev)
> > +{
> > + struct device *dev = &pdev->dev;
> > + const struct imx_dsp_rproc_dcfg *dcfg;
> > + struct imx_dsp_rproc *priv;
> > + struct rproc *rproc;
> > + const char *fw_name;
> > + int ret;
> > +
> > + dcfg = of_device_get_match_data(dev);
> > + if (!dcfg)
> > + return -ENODEV;
> > +
> > + ret = rproc_of_parse_firmware(dev, 0, &fw_name);
> > + if (ret) {
> > + dev_err(dev, "failed to parse firmware-name property, ret = %d\n",
> > + ret);
> > + return ret;
> > + }
> > +
> > + rproc = rproc_alloc(dev, "imx-dsp-rproc", &imx_dsp_rproc_ops, fw_name,
> > + sizeof(*priv));
> > + if (!rproc)
> > + return -ENOMEM;
> > +
> > + priv = rproc->priv;
> > + priv->rproc = rproc;
> > + priv->dcfg = dcfg;
> > + priv->dev = dev;
> > +
> > + dev_set_drvdata(dev, rproc);
> > +
> > + priv->workqueue = create_workqueue(dev_name(dev));
> > + if (!priv->workqueue) {
> > + dev_err(dev, "cannot create workqueue\n");
> > + ret = -ENOMEM;
> > + goto err_wkq;
> > + }
> > +
> > + INIT_WORK(&priv->rproc_work, imx_dsp_rproc_vq_work);
> > +
> > + ret = imx_dsp_rproc_detect_mode(priv);
> > + if (ret) {
> > + dev_err(dev, "failed on imx_dsp_rproc_detect_mode\n");
> > + goto err_detect;
> > + }
> > +
> > + ret = imx_dsp_attach_pm_domains(priv);
> > + if (ret) {
> > + dev_err(dev, "failed on imx_dsp_attach_pm_domains\n");
> > + goto err_pm;
> > + }
> > +
> > + ret = imx_dsp_rproc_clk_get(priv);
> > + if (ret) {
> > + dev_err(dev, "failed on imx_dsp_rproc_clk_get\n");
> > + goto err_clk_get;
> > + }
> > +
> > + init_completion(&priv->pm_comp);
> > + rproc->auto_boot = false;
> > + ret = rproc_add(rproc);
> > + if (ret) {
> > + dev_err(dev, "rproc_add failed\n");
> > + goto err_rproc_add;
> > + }
> > +
> > + pm_runtime_enable(dev);
> > +
> > + return 0;
> > +
> > +err_rproc_add:
> > +err_clk_get:
> > + imx_dsp_detach_pm_domains(priv);
> > +err_pm:
> > +err_detect:
> > + destroy_workqueue(priv->workqueue);
> > +err_wkq:
> > + rproc_free(rproc);
> > +
> > + return ret;
> > +}
> > +
> > +static int imx_dsp_rproc_remove(struct platform_device *pdev)
> > +{
> > + struct rproc *rproc = platform_get_drvdata(pdev);
> > + struct imx_dsp_rproc *priv = rproc->priv;
> > +
> > + pm_runtime_disable(&pdev->dev);
> > + rproc_del(rproc);
> > + imx_dsp_detach_pm_domains(priv);
> > + destroy_workqueue(priv->workqueue);
> > + rproc_free(rproc);
> > +
> > + return 0;
> > +}
> > +
> > +/* pm runtime */
> > +static int imx_dsp_runtime_resume(struct device *dev)
> > +{
> > + struct rproc *rproc = dev_get_drvdata(dev);
> > + struct imx_dsp_rproc *priv = rproc->priv;
> > + const struct imx_dsp_rproc_dcfg *dcfg = priv->dcfg;
> > + int ret;
> > +
> > + ret = imx_dsp_rproc_mbox_init(priv);
> > + if (ret) {
> > + dev_err(dev, "failed on imx_dsp_rproc_mbox_init\n");
> > + return ret;
> > + }
> > +
> > + ret = imx_dsp_rproc_clk_enable(priv);
> > + if (ret) {
> > + dev_err(dev, "failed on imx_dsp_rproc_clk_enable\n");
> > + return ret;
> > + }
> > +
> > + /* reset DSP if needed */
> > + if (dcfg->reset)
> > + dcfg->reset(priv);
> > +
> > + return 0;
> > +}
> > +
> > +static int imx_dsp_runtime_suspend(struct device *dev)
> > +{
> > + struct rproc *rproc = dev_get_drvdata(dev);
> > + struct imx_dsp_rproc *priv = rproc->priv;
> > +
> > + imx_dsp_rproc_clk_disable(priv);
> > +
> > + imx_dsp_rproc_free_mbox(priv);
> > +
> > + return 0;
> > +}
> > +
> > +static void imx_dsp_load_firmware(const struct firmware *fw, void *context)
> > +{
> > + struct rproc *rproc = context;
> > + int ret;
> > +
> > + /* load the ELF segments to memory */
> > + ret = rproc_load_segments(rproc, fw);
> > + if (ret)
> > + goto out;
> > +
> > + /* power up the remote processor */
> > + ret = rproc->ops->start(rproc);
> > + if (ret)
> > + goto out;
> > +
> > + /* same flow as first start */
> > + rproc->ops->kick(rproc, 0);
> > +
> > +out:
> > + release_firmware(fw);
> > +}
> > +
> > +static int imx_dsp_suspend(struct device *dev)
> > +{
> > + struct rproc *rproc = dev_get_drvdata(dev);
> > + struct imx_dsp_rproc *priv = rproc->priv;
> > + __u32 mmsg = RP_MBOX_SUSPEND_SYSTEM;
> > + int ret;
> > +
> > + if (rproc->state == RPROC_RUNNING) {
>
> if (rproc->state != RPROC_RUNNING)
> return;
All right, I will update it.
>
> > + reinit_completion(&priv->pm_comp);
> > +
> > + ret = mbox_send_message(priv->tx_ch, (void *)&mmsg);
> > + if (ret < 0) {
> > + dev_err(dev, "PM mbox_send_message failed: %d\n", ret);
> > + return ret;
> > + }
> > +
> > + if (!wait_for_completion_timeout(&priv->pm_comp, msecs_to_jiffies(100)))
> > + return -EBUSY;
> > + }
> > +
> > + return pm_runtime_force_suspend(dev);
>
> Please add a comment that explains why this needs to be called.
Ok.
>
> > +}
> > +
> > +static int imx_dsp_resume(struct device *dev)
> > +{
> > + struct rproc *rproc = dev_get_drvdata(dev);
> > + int ret = 0;
> > +
> > + ret = pm_runtime_force_resume(dev);
> > + if (ret)
> > + return ret;
> > +
> > + if (rproc->state == RPROC_RUNNING) {
>
> Same as above
>
> > + /*TODO: load firmware and start */
>
> Not sure about the "TODO" part... To me this is exactly what
> request_firmware_nowait() does.
Sorry, this should be refined.
>
> > + ret = request_firmware_nowait(THIS_MODULE,
> > + FW_ACTION_UEVENT,
> > + rproc->firmware,
> > + dev,
> > + GFP_KERNEL,
> > + rproc,
> > + imx_dsp_load_firmware);
>
> Stacking.
I will update it.
>
> Based on the implementation of imx_dsp_load_firmare() I have to guess that image
> segments are lost during a system suspend, which requires re-loading upon system
> resume.
Right.
>
> Once again,I have to guess because there is no comments in the code. Look
> at what the TI guys have done in omap_remoteproc.c. Even when I look at their
> code for the first time I clearly understand what the driver does, and that
> without any knowledge about the HW.
>
> I will stop here for this patchset.
Thanks. I will add more comments.
>
> Thanks,
> Mathieu
>
> > + if (ret < 0) {
> > + dev_err(dev, "load firmware failed: %d\n", ret);
> > + goto err;
> > + }
> > + }
> > +
> > + return 0;
> > +
> > +err:
> > + pm_runtime_force_suspend(dev);
> > +
> > + return ret;
> > +}
> > +
> > +static const struct dev_pm_ops imx_dsp_rproc_pm_ops = {
> > + SET_SYSTEM_SLEEP_PM_OPS(imx_dsp_suspend, imx_dsp_resume)
> > + SET_RUNTIME_PM_OPS(imx_dsp_runtime_suspend,
> > + imx_dsp_runtime_resume, NULL)
> > +};
> > +
> > +static const struct of_device_id imx_dsp_rproc_of_match[] = {
> > + { .compatible = "fsl,imx8qxp-hifi4", .data = &imx_dsp_rproc_cfg_imx8qxp },
> > + { .compatible = "fsl,imx8qm-hifi4", .data = &imx_dsp_rproc_cfg_imx8qm },
> > + { .compatible = "fsl,imx8mp-hifi4", .data = &imx_dsp_rproc_cfg_imx8mp },
> > + { .compatible = "fsl,imx8ulp-hifi4", .data = &imx_dsp_rproc_cfg_imx8ulp },
> > + {},
> > +};
> > +MODULE_DEVICE_TABLE(of, imx_dsp_rproc_of_match);
> > +
> > +static struct platform_driver imx_dsp_rproc_driver = {
> > + .probe = imx_dsp_rproc_probe,
> > + .remove = imx_dsp_rproc_remove,
> > + .driver = {
> > + .name = "imx-dsp-rproc",
> > + .of_match_table = imx_dsp_rproc_of_match,
> > + .pm = &imx_dsp_rproc_pm_ops,
> > + },
> > +};
> > +module_platform_driver(imx_dsp_rproc_driver);
> > +
> > +MODULE_LICENSE("GPL v2");
> > +MODULE_DESCRIPTION("i.MX HiFi Core Remote Processor Control Driver");
> > +MODULE_AUTHOR("Shengjiu Wang <[email protected]>");
> > --
> > 2.17.1
> >
On Wed, Aug 25, 2021 at 03:28:35PM +0800, Shengjiu Wang wrote:
> Define the compatible string and properties needed by imx_dsp_rproc
> driver.
>
> Signed-off-by: Shengjiu Wang <[email protected]>
> ---
> changes in v2:
> - add items for clock-names
> - change syscon to fsl,dsp-ctrl
>
> .../remoteproc/fsl,imx-dsp-rproc.yaml | 150 ++++++++++++++++++
> 1 file changed, 150 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/remoteproc/fsl,imx-dsp-rproc.yaml
>
> diff --git a/Documentation/devicetree/bindings/remoteproc/fsl,imx-dsp-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/fsl,imx-dsp-rproc.yaml
> new file mode 100644
> index 000000000000..edf6e4b8d7bb
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/remoteproc/fsl,imx-dsp-rproc.yaml
> @@ -0,0 +1,150 @@
> +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/remoteproc/fsl,imx-dsp-rproc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: i.MX DSP Remoteproc Devices
> +
> +maintainers:
> + - Shengjiu Wang <[email protected]>
> +
> +description:
> + This binding provides support for DSP processors found on i.mX family of SoCs
i.MX
> +
> +properties:
> + compatible:
> + enum:
> + - fsl,imx8qxp-hifi4
> + - fsl,imx8qm-hifi4
> + - fsl,imx8mp-hifi4
> + - fsl,imx8ulp-hifi4
> +
> + clocks:
> + description:
> + Main functional clock for the remote processor
> + minItems: 1
> + maxItems: 32
> +
> + clock-names:
> + description: |
> + List of clock names for the remote processor.
> + dsp_clkx for clocks of dsp itself.
> + per_clkx for clocks of peripherals used by dsp.
I still don't like your random collection of clocks. What if you have
other resources besides clocks to manage? Pin mux, resets, power
domains, etc. It would be better if you describe the peripherals in DT
and then link to them here. But maybe the devices themselves aren't
visible?
> + minItems: 1
> + maxItems: 26
> + items:
> + - const: dsp_clk1
> + - const: dsp_clk2
> + - const: dsp_clk3
> + - const: dsp_clk4
> + - const: dsp_clk5
> + - const: dsp_clk6
> + - const: dsp_clk7
> + - const: dsp_clk8
Surely you can name these by function? e.g. core, bus, axi, etc.
> + - const: per_clk1
> + - const: per_clk2
> + - const: per_clk3
> + - const: per_clk4
> + - const: per_clk5
> + - const: per_clk6
> + - const: per_clk7
> + - const: per_clk8
> + - const: per_clk9
> + - const: per_clk10
> + - const: per_clk11
> + - const: per_clk12
> + - const: per_clk13
> + - const: per_clk14
> + - const: per_clk15
> + - const: per_clk16
> + - const: per_clk17
> + - const: per_clk18
> +
> + fsl,dsp-ctrl:
> + $ref: /schemas/types.yaml#/definitions/phandle
> + description:
> + Phandle to syscon block which provide access for processor enablement
> +
> + mbox-names:
> + items:
> + - const: tx
> + - const: rx
> + - const: rxdb
> +
> + mboxes:
> + description:
> + This property is required only if the rpmsg/virtio functionality is used.
> + List of <&phandle type channel> - 1 channel for TX, 1 channel for RX, 1 channel for RXDB.
> + (see mailbox/fsl,mu.yaml)
> + minItems: 1
> + maxItems: 3
> +
> + firmware-name:
> + description: |
> + Default name of the firmware to load to the remote processor.
> +
> + memory-region:
> + description:
> + If present, a phandle for a reserved memory area that used for vdev buffer,
> + resource table, vring region and others used by remote processor.
> + minItems: 1
> + maxItems: 32
> +
> + reg:
> + description: |
> + Address space for any remoteproc memories present on the SoC.
> +
> + power-domains:
> + minItems: 1
> + maxItems: 32
> +
> +required:
> + - compatible
> + - reg
> + - mboxes
> + - mbox-names
> + - clocks
> + - clock-names
> + - firmware-name
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/imx8mp-clock.h>
> + dsp_reserved: dsp@92400000 {
> + reg = <0x92400000 0x1000000>;
> + no-map;
> + };
> + dsp_vdev0vring0: vdev0vring0@942f0000 {
> + reg = <0x942f0000 0x8000>;
> + no-map;
> + };
> + dsp_vdev0vring1: vdev0vring1@942f8000 {
> + reg = <0x942f8000 0x8000>;
> + no-map;
> + };
> + dsp_vdev0buffer: vdev0buffer@94300000 {
> + compatible = "shared-dma-pool";
> + reg = <0x94300000 0x100000>;
> + no-map;
> + };
> +
> + dsp: dsp@3b6e8000 {
> + compatible = "fsl,imx8mp-hifi4";
> + reg = <0x3B6E8000 0x88000>;
> + clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_OCRAMA_IPG>,
> + <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_DSP_ROOT>,
> + <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_DSPDBG_ROOT>;
> + clock-names = "dsp_clk1", "dsp_clk2", "dsp_clk3";
> + firmware-name = "imx/dsp/hifi4.bin";
> + power-domains = <&audiomix_pd>;
> + mbox-names = "tx", "rx", "rxdb";
> + mboxes = <&mu2 0 0>,
> + <&mu2 1 0>,
> + <&mu2 3 0>;
> + memory-region = <&dsp_vdev0buffer>, <&dsp_vdev0vring0>,
> + <&dsp_vdev0vring1>, <&dsp_reserved>;
> + fsl,dsp-ctrl = <&audio_blk_ctrl>;
> + };
> --
> 2.17.1
>
>
Hi Rob
On Thu, Sep 2, 2021 at 11:17 PM Rob Herring <[email protected]> wrote:
>
> On Wed, Aug 25, 2021 at 03:28:35PM +0800, Shengjiu Wang wrote:
> > Define the compatible string and properties needed by imx_dsp_rproc
> > driver.
> >
> > Signed-off-by: Shengjiu Wang <[email protected]>
> > ---
> > changes in v2:
> > - add items for clock-names
> > - change syscon to fsl,dsp-ctrl
> >
> > .../remoteproc/fsl,imx-dsp-rproc.yaml | 150 ++++++++++++++++++
> > 1 file changed, 150 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/remoteproc/fsl,imx-dsp-rproc.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/remoteproc/fsl,imx-dsp-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/fsl,imx-dsp-rproc.yaml
> > new file mode 100644
> > index 000000000000..edf6e4b8d7bb
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/remoteproc/fsl,imx-dsp-rproc.yaml
> > @@ -0,0 +1,150 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/remoteproc/fsl,imx-dsp-rproc.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: i.MX DSP Remoteproc Devices
> > +
> > +maintainers:
> > + - Shengjiu Wang <[email protected]>
> > +
> > +description:
> > + This binding provides support for DSP processors found on i.mX family of SoCs
>
> i.MX
I will update it.
>
> > +
> > +properties:
> > + compatible:
> > + enum:
> > + - fsl,imx8qxp-hifi4
> > + - fsl,imx8qm-hifi4
> > + - fsl,imx8mp-hifi4
> > + - fsl,imx8ulp-hifi4
> > +
> > + clocks:
> > + description:
> > + Main functional clock for the remote processor
> > + minItems: 1
> > + maxItems: 32
> > +
> > + clock-names:
> > + description: |
> > + List of clock names for the remote processor.
> > + dsp_clkx for clocks of dsp itself.
> > + per_clkx for clocks of peripherals used by dsp.
>
> I still don't like your random collection of clocks. What if you have
> other resources besides clocks to manage? Pin mux, resets, power
> domains, etc. It would be better if you describe the peripherals in DT
> and then link to them here. But maybe the devices themselves aren't
> visible?
Ok, I will remove these per_clks in next version.
Maybe it is better to handle them in firmware side.
>
> > + minItems: 1
> > + maxItems: 26
> > + items:
> > + - const: dsp_clk1
> > + - const: dsp_clk2
> > + - const: dsp_clk3
> > + - const: dsp_clk4
> > + - const: dsp_clk5
> > + - const: dsp_clk6
> > + - const: dsp_clk7
> > + - const: dsp_clk8
>
> Surely you can name these by function? e.g. core, bus, axi, etc.
Ok, I will update them in next version.
Thanks for reviewing.
Best regards
Wang shengjiu
>
> > + - const: per_clk1
> > + - const: per_clk2
> > + - const: per_clk3
> > + - const: per_clk4
> > + - const: per_clk5
> > + - const: per_clk6
> > + - const: per_clk7
> > + - const: per_clk8
> > + - const: per_clk9
> > + - const: per_clk10
> > + - const: per_clk11
> > + - const: per_clk12
> > + - const: per_clk13
> > + - const: per_clk14
> > + - const: per_clk15
> > + - const: per_clk16
> > + - const: per_clk17
> > + - const: per_clk18
> > +
> > + fsl,dsp-ctrl:
> > + $ref: /schemas/types.yaml#/definitions/phandle
> > + description:
> > + Phandle to syscon block which provide access for processor enablement
> > +
> > + mbox-names:
> > + items:
> > + - const: tx
> > + - const: rx
> > + - const: rxdb
> > +
> > + mboxes:
> > + description:
> > + This property is required only if the rpmsg/virtio functionality is used.
> > + List of <&phandle type channel> - 1 channel for TX, 1 channel for RX, 1 channel for RXDB.
> > + (see mailbox/fsl,mu.yaml)
> > + minItems: 1
> > + maxItems: 3
> > +
> > + firmware-name:
> > + description: |
> > + Default name of the firmware to load to the remote processor.
> > +
> > + memory-region:
> > + description:
> > + If present, a phandle for a reserved memory area that used for vdev buffer,
> > + resource table, vring region and others used by remote processor.
> > + minItems: 1
> > + maxItems: 32
> > +
> > + reg:
> > + description: |
> > + Address space for any remoteproc memories present on the SoC.
> > +
> > + power-domains:
> > + minItems: 1
> > + maxItems: 32
> > +
> > +required:
> > + - compatible
> > + - reg
> > + - mboxes
> > + - mbox-names
> > + - clocks
> > + - clock-names
> > + - firmware-name
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > + - |
> > + #include <dt-bindings/clock/imx8mp-clock.h>
> > + dsp_reserved: dsp@92400000 {
> > + reg = <0x92400000 0x1000000>;
> > + no-map;
> > + };
> > + dsp_vdev0vring0: vdev0vring0@942f0000 {
> > + reg = <0x942f0000 0x8000>;
> > + no-map;
> > + };
> > + dsp_vdev0vring1: vdev0vring1@942f8000 {
> > + reg = <0x942f8000 0x8000>;
> > + no-map;
> > + };
> > + dsp_vdev0buffer: vdev0buffer@94300000 {
> > + compatible = "shared-dma-pool";
> > + reg = <0x94300000 0x100000>;
> > + no-map;
> > + };
> > +
> > + dsp: dsp@3b6e8000 {
> > + compatible = "fsl,imx8mp-hifi4";
> > + reg = <0x3B6E8000 0x88000>;
> > + clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_OCRAMA_IPG>,
> > + <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_DSP_ROOT>,
> > + <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_DSPDBG_ROOT>;
> > + clock-names = "dsp_clk1", "dsp_clk2", "dsp_clk3";
> > + firmware-name = "imx/dsp/hifi4.bin";
> > + power-domains = <&audiomix_pd>;
> > + mbox-names = "tx", "rx", "rxdb";
> > + mboxes = <&mu2 0 0>,
> > + <&mu2 1 0>,
> > + <&mu2 3 0>;
> > + memory-region = <&dsp_vdev0buffer>, <&dsp_vdev0vring0>,
> > + <&dsp_vdev0vring1>, <&dsp_reserved>;
> > + fsl,dsp-ctrl = <&audio_blk_ctrl>;
> > + };
> > --
> > 2.17.1
> >
> >