Hi. I want to add support for new home automation devices.
JetHome Jethub D1 (http://jethome.ru/jethub-d1) is a home automation controller with the following features:
- DIN Rail Mounting
- Amlogic A113X (ARM Cortex-A53) quad-core up to 1.5GHz
- no video out
- 512Mb/1GB LPDDR4
- 8/16GB eMMC flash
- 1 x USB 2.0
- 1 x 10/100Mbps ethernet
- WiFi / Bluetooth AMPAK AP6255 (Broadcom BCM43455) IEEE 802.11a/b/g/n/ac, Bluetooth 4.2.
- TI CC2538 + CC2592 Zigbee Wireless Module with up to 20dBm output power and Zigbee 3.0 support.
- 2 x gpio LEDS
- GPIO user Button
- 1 x 1-Wire
- 2 x RS-485
- 4 x dry contact digital GPIO inputs
- 3 x relay GPIO outputs
- DC source with a voltage of 9 to 56 V / Passive POE
JetHome Jethub H1 (http://jethome.ru/jethub-h1) is a home automation controller with the following features:
- square plastic case
- Amlogic S905W (ARM Cortex-A53) quad-core up to 1.5GHz
- no video out
- 1GB LPDDR4
- 8/16GB eMMC flash
- 2 x USB 2.0
- 1 x 10/100Mbps ethernet
- WiFi / Bluetooth RTL8822CS IEEE 802.11a/b/g/n/ac, Bluetooth 5.0.
- TI CC2538 + CC2592 Zigbee Wireless Module with up to 20dBm output power and Zigbee 3.0 support.
- MicroSD 2.x/3.x/4.x DS/HS cards.
- 1 x gpio LED
- ADC user Button
- DC source 5V microUSB
Vyacheslav Bocharov (3):
arm64: dts: meson-gxl: add support for JetHub H1
arm64: dts: meson-axg: add support for JetHub D1
dt-bindings: arm: amlogic: add bindings for JetHome Jethud D1/H1
.../devicetree/bindings/arm/amlogic.yaml | 2 +
arch/arm64/boot/dts/amlogic/Makefile | 2 +
.../amlogic/meson-axg-jethome-jethub-j100.dts | 439 ++++++++++++++++++
.../meson-gxl-s905w-jethome-jethub-j80.dts | 325 +++++++++++++
4 files changed, 768 insertions(+)
create mode 100644 arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts
create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts
--
2.30.2
JetHome Jethub H1 (http://jethome.ru/jethub-h1) is a home automation controller with the following features:
- square plastic case
- Amlogic S905W (ARM Cortex-A53) quad-core up to 1.5GHz
- no video out
- 1GB LPDDR4
- 8/16GB eMMC flash
- 2 x USB 2.0
- 1 x 10/100Mbps ethernet
- WiFi / Bluetooth RTL8822CS IEEE 802.11a/b/g/n/ac, Bluetooth 5.0.
- TI CC2538 + CC2592 Zigbee Wireless Module with up to 20dBm output power and Zigbee 3.0 support.
- MicroSD 2.x/3.x/4.x DS/HS cards.
- 1 x gpio LED
- ADC user Button
- DC source 5V microUSB
Signed-off-by: Vyacheslav Bocharov <[email protected]>
---
arch/arm64/boot/dts/amlogic/Makefile | 1 +
.../meson-gxl-s905w-jethome-jethub-j80.dts | 325 ++++++++++++++++++
2 files changed, 326 insertions(+)
create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts
diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index faa0a79a34f5..2c3ce7c401a5 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -38,6 +38,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s805x-p241.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-p281.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-tx3-mini.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-libretech-pc.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-jethome-jethub-j80.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-khadas-vim2.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-mecool-kiii-pro.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxm-minix-neo-u9h.dtb
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts
new file mode 100644
index 000000000000..7b14c7c4eed5
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts
@@ -0,0 +1,325 @@
+
+/dts-v1/;
+
+#include "meson-gxl.dtsi"
+
+/ {
+ compatible = "jethome,j80", "amlogic,s905w", "amlogic,meson-gxl";
+ model = "JetHome JetHub J80";
+ amlogic-dt-id = "gxl_jethubj80_v1";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x40000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ linux,cma {
+ compatible = "shared-dma-pool";
+ reusable; size = <0x0 0x400000>;
+ alignment = <0x0 0x400000>;
+ linux,cma-default;
+ };
+ };
+
+ aliases {
+ serial0 = &uart_AO; /* Console */
+ serial1 = &uart_A; /* Bluetooth */
+ serial2 = &uart_AO_B; /* Wireless module 1 */
+ serial3 = &uart_C; /* Wireless module 2 */
+ ethernet0 = ðmac;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ vddio_ao18: regulator-vddio_ao18 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDIO_AO18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vddio_boot: regulator-vddio_boot {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDIO_BOOT";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vddao_3v3: regulator-vddao_3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDAO_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vcc_3v3: regulator-vcc_3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ emmc_pwrseq: emmc-pwrseq {
+ compatible = "mmc-pwrseq-emmc";
+ reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi32k: wifi32k {
+ compatible = "pwm-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+ clocks = <&wifi32k>;
+ clock-names = "ext_clock";
+ };
+
+ partitions: partitions {
+ parts = <1>;
+ part-0 = <&rootfs>;
+ rootfs: rootfs {
+ pname = "rootfs";
+ size = <0xffffffff 0xffffffff>;
+ mask = <4>;
+ };
+ };
+
+ efusekey: efusekey {
+ keynum = <5>;
+ key0 = <&key_0>;
+ key1 = <&key_1>;
+ key2 = <&key_2>;
+ key3 = <&key_3>;
+ key4 = <&key_4>;
+
+ key_0: key_0 {
+ keyname = "mac";
+ offset = <0>;
+ size = <6>;
+ };
+ key_1: key_1 {
+ keyname = "mac_bt";
+ offset = <6>;
+ size = <6>;
+ };
+ key_2: key_2 {
+ keyname = "mac_wifi";
+ offset = <12>;
+ size = <6>;
+ };
+ key_3: key_3 {
+ keyname = "usid";
+ offset = <18>;
+ size = <32>;
+ };
+ key_4: key_4 {
+ keyname = "serial";
+ offset = <50>;
+ size = <32>;
+ };
+ }; //End efusekey
+
+ unifykey {
+ compatible = "amlogic, unifykey";
+ status = "ok";
+ unifykey-num = <6>;
+ unifykey-index-0 = <&keysn_0>;
+ unifykey-index-1 = <&keysn_1>;
+ unifykey-index-2 = <&keysn_2>;
+ unifykey-index-3 = <&keysn_3>;
+ unifykey-index-4 = <&keysn_4>;
+ unifykey-index-5 = <&keysn_5>;
+
+ keysn_0: key_0 {
+ key-name = "usid";
+ key-device = "efuse";
+ key-permit = "read","write";
+ };
+ keysn_1: key_1 {
+ key-name = "mac";
+ key-device = "efuse";
+ key-permit = "read","write";
+ };
+ keysn_2: key_2 {
+ key-name = "mac_bt";
+ key-device = "normal";
+ key-permit = "read","write","del";
+ key-type = "mac";
+ };
+ keysn_3: key_3 {
+ key-name = "mac_wifi";
+ key-device = "normal";
+ key-permit = "read","write","del";
+ key-type = "mac";
+ };
+ keysn_4: key_4 {
+ key-name = "serial";
+ key-device = "efuse";
+ key-permit = "read","write";
+ };
+ keysn_5:key_5 {
+ key-name = "deviceid";
+ key-device = "normal";
+ key-permit = "read","write","del";
+ };
+ }; //End unifykey
+};
+
+&usb {
+ status = "okay";
+ dr_mode = "host";
+};
+
+&efuse {
+ status = "okay";
+ compatible = "amlogic,meson-gxbb-efuse", "amlogic, efuse";
+ read_cmd = <0x82000030>;
+ write_cmd = <0x82000031>;
+ get_max_cmd = <0x82000033>;
+ key = <&efusekey>;
+ clock-names = "efuse_clk";
+};
+
+&pwm_ef {
+ status = "okay";
+ pinctrl-0 = <&pwm_e_pins>;
+ pinctrl-names = "default";
+ clocks = <&clkc CLKID_FCLK_DIV4>;
+ clock-names = "clkin0";
+};
+
+&saradc {
+ status = "okay";
+ vref-supply = <&vddio_ao18>;
+};
+
+/* Wireless SDIO Module */
+&sd_emmc_a {
+ status = "okay";
+ pinctrl-0 = <&sdio_pins>;
+ pinctrl-1 = <&sdio_clk_gate_pins>;
+ pinctrl-names = "default", "clk-gate";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bus-width = <4>;
+ cap-sd-highspeed;
+ max-frequency = <50000000>;
+
+ non-removable;
+ disable-wp;
+
+ /* WiFi firmware requires power to be kept while in suspend */
+ keep-power-in-suspend;
+
+ mmc-pwrseq = <&sdio_pwrseq>;
+
+ vmmc-supply = <&vddao_3v3>;
+ vqmmc-supply = <&vddio_boot>;
+};
+
+/* SD card */
+&sd_emmc_b {
+ status = "okay";
+ pinctrl-0 = <&sdcard_pins>;
+ pinctrl-1 = <&sdcard_clk_gate_pins>;
+ pinctrl-names = "default", "clk-gate";
+
+ bus-width = <4>;
+ cap-sd-highspeed;
+ max-frequency = <50000000>;
+ disable-wp;
+
+ cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
+
+ vmmc-supply = <&vddao_3v3>;
+ vqmmc-supply = <&vddio_boot>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+ status = "okay";
+ pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
+ pinctrl-1 = <&emmc_clk_gate_pins>;
+ pinctrl-names = "default", "clk-gate";
+
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ max-frequency = <200000000>;
+ non-removable;
+ disable-wp;
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+
+ mmc-pwrseq = <&emmc_pwrseq>;
+ vmmc-supply = <&vcc_3v3>;
+ vqmmc-supply = <&vddio_boot>;
+};
+
+/* Console UART */
+&uart_AO {
+ status = "okay";
+ pinctrl-0 = <&uart_ao_a_pins>;
+ pinctrl-names = "default";
+};
+
+/* S905X only has access to its internal PHY */
+ðmac {
+ reg = <0x0 0xc9410000 0x0 0x10000
+ 0x0 0xc8834540 0x0 0x4
+ 0x0 0xc8834558 0x0 0xc
+ 0x0 0xc1104408 0x0 0x4>;
+ amlogic,eth-leds = <0x91>;
+ status = "okay";
+ phy-mode = "rmii";
+ phy-handle = <&internal_phy>;
+};
+
+&internal_phy {
+ status = "okay";
+ pinctrl-0 = <ð_link_led_pins>, <ð_act_led_pins>;
+ pinctrl-names = "default";
+};
+
+&uart_A {
+ status = "okay";
+ pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+ pinctrl-names = "default";
+ uart-has-rtscts;
+};
+
+&uart_C {
+ status = "okay";
+ pinctrl-0 = <&uart_c_pins>;
+ pinctrl-names = "default";
+};
+
+&uart_AO_B {
+ status = "okay";
+ pinctrl-0 = <&uart_ao_b_pins>, <&uart_ao_b_cts_rts_pins>;
+ pinctrl-names = "default";
+ uart-has-rtscts;
+};
+
+&i2c_B {
+ status = "okay";
+ pinctrl-names="default";
+ pinctrl-0=<&i2c_b_pins>;
+
+ pcf8563: pcf8563@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ status = "okay";
+ };
+};
+
--
2.30.2
From: Vyacheslav Bocharov <[email protected]>
Add bindings for JetHome JetHub D1/H1
Signed-off-by: Vyacheslav Bocharov <[email protected]>
---
Documentation/devicetree/bindings/arm/amlogic.yaml | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml b/Documentation/devicetree/bindings/arm/amlogic.yaml
index 6423377710ee..b223d7829c3d 100644
--- a/Documentation/devicetree/bindings/arm/amlogic.yaml
+++ b/Documentation/devicetree/bindings/arm/amlogic.yaml
@@ -86,6 +86,7 @@ properties:
- enum:
- amlogic,p281
- oranth,tx3-mini
+ - jethome,jethub-j80
- const: amlogic,s905w
- const: amlogic,meson-gxl
@@ -133,6 +134,7 @@ properties:
items:
- enum:
- amlogic,s400
+ - jethome,jethub-j100
- const: amlogic,a113d
- const: amlogic,meson-axg
--
2.30.2
Hi,
On 02/09/2021 15:05, Vyacheslav Bocharov wrote:
> JetHome Jethub H1 (http://jethome.ru/jethub-h1) is a home automation controller with the following features:
>
> - square plastic case
> - Amlogic S905W (ARM Cortex-A53) quad-core up to 1.5GHz
> - no video out
> - 1GB LPDDR4
> - 8/16GB eMMC flash
> - 2 x USB 2.0
> - 1 x 10/100Mbps ethernet
> - WiFi / Bluetooth RTL8822CS IEEE 802.11a/b/g/n/ac, Bluetooth 5.0.
> - TI CC2538 + CC2592 Zigbee Wireless Module with up to 20dBm output power and Zigbee 3.0 support.
> - MicroSD 2.x/3.x/4.x DS/HS cards.
> - 1 x gpio LED
> - ADC user Button
> - DC source 5V microUSB
Thanks for submitting a new board !
>
> Signed-off-by: Vyacheslav Bocharov <[email protected]>
> ---
> arch/arm64/boot/dts/amlogic/Makefile | 1 +
> .../meson-gxl-s905w-jethome-jethub-j80.dts | 325 ++++++++++++++++++
> 2 files changed, 326 insertions(+)
> create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts
>
> diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
> index faa0a79a34f5..2c3ce7c401a5 100644
> --- a/arch/arm64/boot/dts/amlogic/Makefile
> +++ b/arch/arm64/boot/dts/amlogic/Makefile
> @@ -38,6 +38,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s805x-p241.dtb
> dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-p281.dtb
> dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-tx3-mini.dtb
> dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-libretech-pc.dtb
> +dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-jethome-jethub-j80.dtb
> dtb-$(CONFIG_ARCH_MESON) += meson-gxm-khadas-vim2.dtb
> dtb-$(CONFIG_ARCH_MESON) += meson-gxm-mecool-kiii-pro.dtb
> dtb-$(CONFIG_ARCH_MESON) += meson-gxm-minix-neo-u9h.dtb
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts
> new file mode 100644
> index 000000000000..7b14c7c4eed5
> --- /dev/null
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts
> @@ -0,0 +1,325 @@
Please add a proper SPDX Licence identifier.
Don't you want to add a proper copyright header ?
> +
> +/dts-v1/;
> +
> +#include "meson-gxl.dtsi"
> +
> +/ {
> + compatible = "jethome,j80", "amlogic,s905w", "amlogic,meson-gxl";
> + model = "JetHome JetHub J80";
> + amlogic-dt-id = "gxl_jethubj80_v1";
This attribute hasn't any upstream bindings, please remove it.
> +
> + memory@0 {
> + device_type = "memory";
> + reg = <0x0 0x0 0x0 0x40000000>;
> + };
> +
> + reserved-memory {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> + linux,cma {
> + compatible = "shared-dma-pool";
> + reusable; size = <0x0 0x400000>;
> + alignment = <0x0 0x400000>;
> + linux,cma-default;
> + };
> + };
If you want to reduce the cma pool size, simply add:
reserved-memory {
linux,cma {
size = <0x0 0x400000>;
};
};
> +
> + aliases {
> + serial0 = &uart_AO; /* Console */
> + serial1 = &uart_A; /* Bluetooth */
> + serial2 = &uart_AO_B; /* Wireless module 1 */
> + serial3 = &uart_C; /* Wireless module 2 */
> + ethernet0 = ðmac;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +
> + vddio_ao18: regulator-vddio_ao18 {
> + compatible = "regulator-fixed";
> + regulator-name = "VDDIO_AO18";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + vddio_boot: regulator-vddio_boot {
> + compatible = "regulator-fixed";
> + regulator-name = "VDDIO_BOOT";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + vddao_3v3: regulator-vddao_3v3 {
> + compatible = "regulator-fixed";
> + regulator-name = "VDDAO_3V3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + vcc_3v3: regulator-vcc_3v3 {
> + compatible = "regulator-fixed";
> + regulator-name = "VCC_3V3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + emmc_pwrseq: emmc-pwrseq {
> + compatible = "mmc-pwrseq-emmc";
> + reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
> + };
> +
> + wifi32k: wifi32k {
> + compatible = "pwm-clock";
> + #clock-cells = <0>;
> + clock-frequency = <32768>;
> + pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
> + };
> +
> + sdio_pwrseq: sdio-pwrseq {
> + compatible = "mmc-pwrseq-simple";
> + reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
> + clocks = <&wifi32k>;
> + clock-names = "ext_clock";
> + };
> +
> + partitions: partitions {
> + parts = <1>;
> + part-0 = <&rootfs>;
> + rootfs: rootfs {
> + pname = "rootfs";
> + size = <0xffffffff 0xffffffff>;
> + mask = <4>;
> + };
> + };
This node hasn't any upstream bindings, please remove it.
> +
> + efusekey: efusekey {
> + keynum = <5>;
> + key0 = <&key_0>;
> + key1 = <&key_1>;
> + key2 = <&key_2>;
> + key3 = <&key_3>;
> + key4 = <&key_4>;
> +
> + key_0: key_0 {
> + keyname = "mac";
> + offset = <0>;
> + size = <6>;
> + };
> + key_1: key_1 {
> + keyname = "mac_bt";
> + offset = <6>;
> + size = <6>;
> + };
> + key_2: key_2 {
> + keyname = "mac_wifi";
> + offset = <12>;
> + size = <6>;
> + };
> + key_3: key_3 {
> + keyname = "usid";
> + offset = <18>;
> + size = <32>;
> + };
> + key_4: key_4 {
> + keyname = "serial";
> + offset = <50>;
> + size = <32>;
> + };
> + }; //End efusekey
This node hasn't any upstream bindings, please remove it.
> +
> + unifykey {
> + compatible = "amlogic, unifykey";
> + status = "ok";
> + unifykey-num = <6>;
> + unifykey-index-0 = <&keysn_0>;
> + unifykey-index-1 = <&keysn_1>;
> + unifykey-index-2 = <&keysn_2>;
> + unifykey-index-3 = <&keysn_3>;
> + unifykey-index-4 = <&keysn_4>;
> + unifykey-index-5 = <&keysn_5>;
> +
> + keysn_0: key_0 {
> + key-name = "usid";
> + key-device = "efuse";
> + key-permit = "read","write";
> + };
> + keysn_1: key_1 {
> + key-name = "mac";
> + key-device = "efuse";
> + key-permit = "read","write";
> + };
> + keysn_2: key_2 {
> + key-name = "mac_bt";
> + key-device = "normal";
> + key-permit = "read","write","del";
> + key-type = "mac";
> + };
> + keysn_3: key_3 {
> + key-name = "mac_wifi";
> + key-device = "normal";
> + key-permit = "read","write","del";
> + key-type = "mac";
> + };
> + keysn_4: key_4 {
> + key-name = "serial";
> + key-device = "efuse";
> + key-permit = "read","write";
> + };
> + keysn_5:key_5 {
> + key-name = "deviceid";
> + key-device = "normal";
> + key-permit = "read","write","del";
> + };
> + }; //End unifykey
> +};
This node hasn't any upstream bindings, please remove it.
> +
> +&usb {
> + status = "okay";
> + dr_mode = "host";
> +};
> +
> +&efuse {
> + status = "okay";
> + compatible = "amlogic,meson-gxbb-efuse", "amlogic, efuse";
> + read_cmd = <0x82000030>;
> + write_cmd = <0x82000031>;
> + get_max_cmd = <0x82000033>;
> + key = <&efusekey>;
> + clock-names = "efuse_clk";
> +};
Looking at Documentation/devicetree/bindings/nvmem/amlogic-efuse.txt :
remove "amlogic, efuse", and all the other attributes.
> +
> +&pwm_ef {
> + status = "okay";
> + pinctrl-0 = <&pwm_e_pins>;
> + pinctrl-names = "default";
> + clocks = <&clkc CLKID_FCLK_DIV4>;
> + clock-names = "clkin0";
> +};
> +
> +&saradc {
> + status = "okay";
> + vref-supply = <&vddio_ao18>;
> +};
> +
> +/* Wireless SDIO Module */
> +&sd_emmc_a {
> + status = "okay";
> + pinctrl-0 = <&sdio_pins>;
> + pinctrl-1 = <&sdio_clk_gate_pins>;
> + pinctrl-names = "default", "clk-gate";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + bus-width = <4>;
> + cap-sd-highspeed;
> + max-frequency = <50000000>;
> +
> + non-removable;
> + disable-wp;
> +
> + /* WiFi firmware requires power to be kept while in suspend */
> + keep-power-in-suspend;
> +
> + mmc-pwrseq = <&sdio_pwrseq>;
> +
> + vmmc-supply = <&vddao_3v3>;
> + vqmmc-supply = <&vddio_boot>;
> +};
> +
> +/* SD card */
> +&sd_emmc_b {
> + status = "okay";
> + pinctrl-0 = <&sdcard_pins>;
> + pinctrl-1 = <&sdcard_clk_gate_pins>;
> + pinctrl-names = "default", "clk-gate";
> +
> + bus-width = <4>;
> + cap-sd-highspeed;
> + max-frequency = <50000000>;
> + disable-wp;
> +
> + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
> +
> + vmmc-supply = <&vddao_3v3>;
> + vqmmc-supply = <&vddio_boot>;
> +};
> +
> +/* eMMC */
> +&sd_emmc_c {
> + status = "okay";
> + pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
> + pinctrl-1 = <&emmc_clk_gate_pins>;
> + pinctrl-names = "default", "clk-gate";
> +
> + bus-width = <8>;
> + cap-mmc-highspeed;
> + max-frequency = <200000000>;
> + non-removable;
> + disable-wp;
> + mmc-ddr-1_8v;
> + mmc-hs200-1_8v;
> +
> + mmc-pwrseq = <&emmc_pwrseq>;
> + vmmc-supply = <&vcc_3v3>;
> + vqmmc-supply = <&vddio_boot>;
> +};
> +
> +/* Console UART */
> +&uart_AO {
> + status = "okay";
> + pinctrl-0 = <&uart_ao_a_pins>;
> + pinctrl-names = "default";
> +};
> +
> +/* S905X only has access to its internal PHY */
Did you mean S905W ?
> +ðmac {
> + reg = <0x0 0xc9410000 0x0 0x10000
> + 0x0 0xc8834540 0x0 0x4
> + 0x0 0xc8834558 0x0 0xc
> + 0x0 0xc1104408 0x0 0x4>;
> + amlogic,eth-leds = <0x91>;
This attribute isn't defined in upstream bindings.
> + status = "okay";
> + phy-mode = "rmii";
> + phy-handle = <&internal_phy>;
> +};
> +
> +&internal_phy {
> + status = "okay";
> + pinctrl-0 = <ð_link_led_pins>, <ð_act_led_pins>;
> + pinctrl-names = "default";
> +};
> +
> +&uart_A {
> + status = "okay";
> + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
> + pinctrl-names = "default";
> + uart-has-rtscts;
> +};
> +
> +&uart_C {
> + status = "okay";
> + pinctrl-0 = <&uart_c_pins>;
> + pinctrl-names = "default";
> +};
> +
> +&uart_AO_B {
> + status = "okay";
> + pinctrl-0 = <&uart_ao_b_pins>, <&uart_ao_b_cts_rts_pins>;
> + pinctrl-names = "default";
> + uart-has-rtscts;
> +};
> +
> +&i2c_B {
> + status = "okay";
> + pinctrl-names="default";
> + pinctrl-0=<&i2c_b_pins>;
Please add spaces before and after the "=".
> +
> + pcf8563: pcf8563@51 {
> + compatible = "nxp,pcf8563";
> + reg = <0x51>;
> + status = "okay";
> + };
> +};
> +
>
Thanks,
Neil