MDIO-attached devices might have interrupts and other things that might
need quiesced when we kexec into a new kernel. Things are even more
creepy when those interrupt lines are shared, and in that case it is
absolutely mandatory to disable all interrupt sources.
Moreover, MDIO devices might be DSA switches, and DSA needs its own
shutdown method to unlink from the DSA master, which is a new
requirement that appeared after commit 2f1e8ea726e9 ("net: dsa: link
interfaces with the DSA master to get rid of lockdep warnings").
So introduce a ->shutdown method in the MDIO device driver structure.
Signed-off-by: Vladimir Oltean <[email protected]>
---
drivers/net/phy/mdio_device.c | 11 +++++++++++
include/linux/mdio.h | 3 +++
2 files changed, 14 insertions(+)
diff --git a/drivers/net/phy/mdio_device.c b/drivers/net/phy/mdio_device.c
index c94cb5382dc9..250742ffdfd9 100644
--- a/drivers/net/phy/mdio_device.c
+++ b/drivers/net/phy/mdio_device.c
@@ -179,6 +179,16 @@ static int mdio_remove(struct device *dev)
return 0;
}
+static void mdio_shutdown(struct device *dev)
+{
+ struct mdio_device *mdiodev = to_mdio_device(dev);
+ struct device_driver *drv = mdiodev->dev.driver;
+ struct mdio_driver *mdiodrv = to_mdio_driver(drv);
+
+ if (mdiodrv->shutdown)
+ mdiodrv->shutdown(mdiodev);
+}
+
/**
* mdio_driver_register - register an mdio_driver with the MDIO layer
* @drv: new mdio_driver to register
@@ -193,6 +203,7 @@ int mdio_driver_register(struct mdio_driver *drv)
mdiodrv->driver.bus = &mdio_bus_type;
mdiodrv->driver.probe = mdio_probe;
mdiodrv->driver.remove = mdio_remove;
+ mdiodrv->driver.shutdown = mdio_shutdown;
retval = driver_register(&mdiodrv->driver);
if (retval) {
diff --git a/include/linux/mdio.h b/include/linux/mdio.h
index ffb787d5ebde..5e6dc38f418e 100644
--- a/include/linux/mdio.h
+++ b/include/linux/mdio.h
@@ -80,6 +80,9 @@ struct mdio_driver {
/* Clears up any memory if needed */
void (*remove)(struct mdio_device *mdiodev);
+
+ /* Quiesces the device on system shutdown, turns off interrupts etc */
+ void (*shutdown)(struct mdio_device *mdiodev);
};
static inline struct mdio_driver *
--
2.25.1
On 9/12/2021 5:09 AM, Vladimir Oltean wrote:
> MDIO-attached devices might have interrupts and other things that might
> need quiesced when we kexec into a new kernel. Things are even more
> creepy when those interrupt lines are shared, and in that case it is
> absolutely mandatory to disable all interrupt sources.
>
> Moreover, MDIO devices might be DSA switches, and DSA needs its own
> shutdown method to unlink from the DSA master, which is a new
> requirement that appeared after commit 2f1e8ea726e9 ("net: dsa: link
> interfaces with the DSA master to get rid of lockdep warnings").
>
> So introduce a ->shutdown method in the MDIO device driver structure.
>
> Signed-off-by: Vladimir Oltean <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
--
Florian
On Sun, Sep 12, 2021 at 03:09:28PM +0300, Vladimir Oltean wrote:
> MDIO-attached devices might have interrupts and other things that might
> need quiesced when we kexec into a new kernel. Things are even more
> creepy when those interrupt lines are shared, and in that case it is
> absolutely mandatory to disable all interrupt sources.
>
> Moreover, MDIO devices might be DSA switches, and DSA needs its own
> shutdown method to unlink from the DSA master, which is a new
> requirement that appeared after commit 2f1e8ea726e9 ("net: dsa: link
> interfaces with the DSA master to get rid of lockdep warnings").
>
> So introduce a ->shutdown method in the MDIO device driver structure.
>
> Signed-off-by: Vladimir Oltean <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Andrew