This series adds support for new SoC MT6873/MT8192/MT8195 to the spmi driver.
This series is based on Chun-Jie's patches[1].
[1] https://patchwork.kernel.org/project/linux-mediatek/list/?series=521655
changes since v11:
- rebase to v5.15-rc1.
Henry Chen (1):
spmi: mediatek: Add support for MT8195
Hsin-Hsiung Wang (4):
dt-bindings: spmi: modify the constraint 'maxItems' to 'minItems'
dt-bindings: spmi: document binding for the Mediatek SPMI controller
spmi: mediatek: Add support for MT6873/8192
arm64: dts: mt8192: add spmi node
.../bindings/spmi/mtk,spmi-mtk-pmif.yaml | 76 +++
.../devicetree/bindings/spmi/spmi.yaml | 2 +-
arch/arm64/boot/dts/mediatek/mt8192.dtsi | 17 +
drivers/spmi/Kconfig | 10 +
drivers/spmi/Makefile | 2 +
drivers/spmi/spmi-mtk-pmif.c | 547 ++++++++++++++++++
6 files changed, 653 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/spmi/mtk,spmi-mtk-pmif.yaml
create mode 100644 drivers/spmi/spmi-mtk-pmif.c
base-commit: 6880fa6c56601bb8ed59df6c30fd390cc5f6dd8f
prerequisite-patch-id: 69871b871ab339881b50a2d6988173050b6c7a4f
prerequisite-patch-id: 4f5900b98a0c7cbe62694f2477a6cb410187714b
--
2.18.0
From: Henry Chen <[email protected]>
Add spmi support for MT8195.
Signed-off-by: Henry Chen <[email protected]>
Signed-off-by: Hsin-Hsiung Wang <[email protected]>
---
changes since v11:
- No change.
---
drivers/spmi/spmi-mtk-pmif.c | 88 ++++++++++++++++++++++++++++++++++++
1 file changed, 88 insertions(+)
diff --git a/drivers/spmi/spmi-mtk-pmif.c b/drivers/spmi/spmi-mtk-pmif.c
index 35d338a19d76..5b9665031a6e 100644
--- a/drivers/spmi/spmi-mtk-pmif.c
+++ b/drivers/spmi/spmi-mtk-pmif.c
@@ -152,6 +152,54 @@ static const u32 mt6873_regs[] = {
[PMIF_SWINF_3_STA] = 0x0CE8,
};
+static const u32 mt8195_regs[] = {
+ [PMIF_INIT_DONE] = 0x0000,
+ [PMIF_INF_EN] = 0x0024,
+ [PMIF_ARB_EN] = 0x0150,
+ [PMIF_CMDISSUE_EN] = 0x03B8,
+ [PMIF_TIMER_CTRL] = 0x03E4,
+ [PMIF_SPI_MODE_CTRL] = 0x0408,
+ [PMIF_IRQ_EVENT_EN_0] = 0x0420,
+ [PMIF_IRQ_FLAG_0] = 0x0428,
+ [PMIF_IRQ_CLR_0] = 0x042C,
+ [PMIF_IRQ_EVENT_EN_1] = 0x0430,
+ [PMIF_IRQ_FLAG_1] = 0x0438,
+ [PMIF_IRQ_CLR_1] = 0x043C,
+ [PMIF_IRQ_EVENT_EN_2] = 0x0440,
+ [PMIF_IRQ_FLAG_2] = 0x0448,
+ [PMIF_IRQ_CLR_2] = 0x044C,
+ [PMIF_IRQ_EVENT_EN_3] = 0x0450,
+ [PMIF_IRQ_FLAG_3] = 0x0458,
+ [PMIF_IRQ_CLR_3] = 0x045C,
+ [PMIF_IRQ_EVENT_EN_4] = 0x0460,
+ [PMIF_IRQ_FLAG_4] = 0x0468,
+ [PMIF_IRQ_CLR_4] = 0x046C,
+ [PMIF_WDT_EVENT_EN_0] = 0x0474,
+ [PMIF_WDT_FLAG_0] = 0x0478,
+ [PMIF_WDT_EVENT_EN_1] = 0x047C,
+ [PMIF_WDT_FLAG_1] = 0x0480,
+ [PMIF_SWINF_0_ACC] = 0x0800,
+ [PMIF_SWINF_0_WDATA_31_0] = 0x0804,
+ [PMIF_SWINF_0_RDATA_31_0] = 0x0814,
+ [PMIF_SWINF_0_VLD_CLR] = 0x0824,
+ [PMIF_SWINF_0_STA] = 0x0828,
+ [PMIF_SWINF_1_ACC] = 0x0840,
+ [PMIF_SWINF_1_WDATA_31_0] = 0x0844,
+ [PMIF_SWINF_1_RDATA_31_0] = 0x0854,
+ [PMIF_SWINF_1_VLD_CLR] = 0x0864,
+ [PMIF_SWINF_1_STA] = 0x0868,
+ [PMIF_SWINF_2_ACC] = 0x0880,
+ [PMIF_SWINF_2_WDATA_31_0] = 0x0884,
+ [PMIF_SWINF_2_RDATA_31_0] = 0x0894,
+ [PMIF_SWINF_2_VLD_CLR] = 0x08A4,
+ [PMIF_SWINF_2_STA] = 0x08A8,
+ [PMIF_SWINF_3_ACC] = 0x08C0,
+ [PMIF_SWINF_3_WDATA_31_0] = 0x08C4,
+ [PMIF_SWINF_3_RDATA_31_0] = 0x08D4,
+ [PMIF_SWINF_3_VLD_CLR] = 0x08E4,
+ [PMIF_SWINF_3_STA] = 0x08E8,
+};
+
enum spmi_regs {
SPMI_OP_ST_CTRL,
SPMI_GRP_ID_EN,
@@ -165,6 +213,15 @@ enum spmi_regs {
SPMI_REC3,
SPMI_REC4,
SPMI_MST_DBG,
+
+ /* MT8195 spmi regs */
+ SPMI_MST_RCS_CTRL,
+ SPMI_SLV_3_0_EINT,
+ SPMI_SLV_7_4_EINT,
+ SPMI_SLV_B_8_EINT,
+ SPMI_SLV_F_C_EINT,
+ SPMI_REC_CMD_DEC,
+ SPMI_DEC_DBG,
};
static const u32 mt6873_spmi_regs[] = {
@@ -182,6 +239,28 @@ static const u32 mt6873_spmi_regs[] = {
[SPMI_MST_DBG] = 0x00fc,
};
+static const u32 mt8195_spmi_regs[] = {
+ [SPMI_OP_ST_CTRL] = 0x0000,
+ [SPMI_GRP_ID_EN] = 0x0004,
+ [SPMI_OP_ST_STA] = 0x0008,
+ [SPMI_MST_SAMPL] = 0x000C,
+ [SPMI_MST_REQ_EN] = 0x0010,
+ [SPMI_MST_RCS_CTRL] = 0x0014,
+ [SPMI_SLV_3_0_EINT] = 0x0020,
+ [SPMI_SLV_7_4_EINT] = 0x0024,
+ [SPMI_SLV_B_8_EINT] = 0x0028,
+ [SPMI_SLV_F_C_EINT] = 0x002C,
+ [SPMI_REC_CTRL] = 0x0040,
+ [SPMI_REC0] = 0x0044,
+ [SPMI_REC1] = 0x0048,
+ [SPMI_REC2] = 0x004C,
+ [SPMI_REC3] = 0x0050,
+ [SPMI_REC4] = 0x0054,
+ [SPMI_REC_CMD_DEC] = 0x005C,
+ [SPMI_DEC_DBG] = 0x00F8,
+ [SPMI_MST_DBG] = 0x00FC,
+};
+
static u32 pmif_readl(struct pmif *arb, enum pmif_regs reg)
{
return readl(arb->base + arb->data->regs[reg]);
@@ -350,6 +429,12 @@ static const struct pmif_data mt6873_pmif_arb = {
.soc_chan = 2,
};
+static const struct pmif_data mt8195_pmif_arb = {
+ .regs = mt8195_regs,
+ .spmimst_regs = mt8195_spmi_regs,
+ .soc_chan = 2,
+};
+
static int mtk_spmi_probe(struct platform_device *pdev)
{
struct pmif *arb;
@@ -438,6 +523,9 @@ static const struct of_device_id mtk_spmi_match_table[] = {
{
.compatible = "mediatek,mt6873-spmi",
.data = &mt6873_pmif_arb,
+ }, {
+ .compatible = "mediatek,mt8195-spmi",
+ .data = &mt8195_pmif_arb,
}, {
/* sentinel */
},
--
2.18.0
Add spmi support for MT6873/8192.
Signed-off-by: Hsin-Hsiung Wang <[email protected]>
---
changes since v11:
- No change.
---
drivers/spmi/Kconfig | 10 +
drivers/spmi/Makefile | 2 +
drivers/spmi/spmi-mtk-pmif.c | 459 +++++++++++++++++++++++++++++++++++
3 files changed, 471 insertions(+)
create mode 100644 drivers/spmi/spmi-mtk-pmif.c
diff --git a/drivers/spmi/Kconfig b/drivers/spmi/Kconfig
index 2874b6c26028..ea5703f6e544 100644
--- a/drivers/spmi/Kconfig
+++ b/drivers/spmi/Kconfig
@@ -34,4 +34,14 @@ config SPMI_MSM_PMIC_ARB
This is required for communicating with Qualcomm PMICs and
other devices that have the SPMI interface.
+config SPMI_MTK_PMIF
+ tristate "Mediatek SPMI Controller (PMIC Arbiter)"
+ help
+ If you say yes to this option, support will be included for the
+ built-in SPMI PMIC Arbiter interface on Mediatek family
+ processors.
+
+ This is required for communicating with Mediatek PMICs and
+ other devices that have the SPMI interface.
+
endif
diff --git a/drivers/spmi/Makefile b/drivers/spmi/Makefile
index 6e092e6f290c..0b21aaffcbb9 100644
--- a/drivers/spmi/Makefile
+++ b/drivers/spmi/Makefile
@@ -6,3 +6,5 @@ obj-$(CONFIG_SPMI) += spmi.o
obj-$(CONFIG_SPMI_HISI3670) += hisi-spmi-controller.o
obj-$(CONFIG_SPMI_MSM_PMIC_ARB) += spmi-pmic-arb.o
+obj-$(CONFIG_SPMI_MTK_PMIF) += spmi-mtk-pmif.o
+
diff --git a/drivers/spmi/spmi-mtk-pmif.c b/drivers/spmi/spmi-mtk-pmif.c
new file mode 100644
index 000000000000..35d338a19d76
--- /dev/null
+++ b/drivers/spmi/spmi-mtk-pmif.c
@@ -0,0 +1,459 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2021 MediaTek Inc.
+
+#include <linux/clk.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/spmi.h>
+
+#define SWINF_IDLE 0x00
+#define SWINF_WFVLDCLR 0x06
+
+#define GET_SWINF(x) (((x) >> 1) & 0x7)
+
+#define PMIF_CMD_REG_0 0
+#define PMIF_CMD_REG 1
+#define PMIF_CMD_EXT_REG 2
+#define PMIF_CMD_EXT_REG_LONG 3
+
+#define PMIF_DELAY_US 10
+#define PMIF_TIMEOUT_US (10 * 1000)
+
+#define PMIF_CHAN_OFFSET 0x5
+
+#define PMIF_MAX_CLKS 3
+
+#define SPMI_OP_ST_BUSY 1
+
+struct ch_reg {
+ u32 ch_sta;
+ u32 wdata;
+ u32 rdata;
+ u32 ch_send;
+ u32 ch_rdy;
+};
+
+struct pmif_data {
+ const u32 *regs;
+ const u32 *spmimst_regs;
+ u32 soc_chan;
+};
+
+struct pmif {
+ void __iomem *base;
+ void __iomem *spmimst_base;
+ struct ch_reg chan;
+ struct clk_bulk_data clks[PMIF_MAX_CLKS];
+ size_t nclks;
+ const struct pmif_data *data;
+};
+
+static const char * const pmif_clock_names[] = {
+ "pmif_sys_ck", "pmif_tmr_ck", "spmimst_clk_mux",
+};
+
+enum pmif_regs {
+ PMIF_INIT_DONE,
+ PMIF_INF_EN,
+ PMIF_ARB_EN,
+ PMIF_CMDISSUE_EN,
+ PMIF_TIMER_CTRL,
+ PMIF_SPI_MODE_CTRL,
+ PMIF_IRQ_EVENT_EN_0,
+ PMIF_IRQ_FLAG_0,
+ PMIF_IRQ_CLR_0,
+ PMIF_IRQ_EVENT_EN_1,
+ PMIF_IRQ_FLAG_1,
+ PMIF_IRQ_CLR_1,
+ PMIF_IRQ_EVENT_EN_2,
+ PMIF_IRQ_FLAG_2,
+ PMIF_IRQ_CLR_2,
+ PMIF_IRQ_EVENT_EN_3,
+ PMIF_IRQ_FLAG_3,
+ PMIF_IRQ_CLR_3,
+ PMIF_IRQ_EVENT_EN_4,
+ PMIF_IRQ_FLAG_4,
+ PMIF_IRQ_CLR_4,
+ PMIF_WDT_EVENT_EN_0,
+ PMIF_WDT_FLAG_0,
+ PMIF_WDT_EVENT_EN_1,
+ PMIF_WDT_FLAG_1,
+ PMIF_SWINF_0_STA,
+ PMIF_SWINF_0_WDATA_31_0,
+ PMIF_SWINF_0_RDATA_31_0,
+ PMIF_SWINF_0_ACC,
+ PMIF_SWINF_0_VLD_CLR,
+ PMIF_SWINF_1_STA,
+ PMIF_SWINF_1_WDATA_31_0,
+ PMIF_SWINF_1_RDATA_31_0,
+ PMIF_SWINF_1_ACC,
+ PMIF_SWINF_1_VLD_CLR,
+ PMIF_SWINF_2_STA,
+ PMIF_SWINF_2_WDATA_31_0,
+ PMIF_SWINF_2_RDATA_31_0,
+ PMIF_SWINF_2_ACC,
+ PMIF_SWINF_2_VLD_CLR,
+ PMIF_SWINF_3_STA,
+ PMIF_SWINF_3_WDATA_31_0,
+ PMIF_SWINF_3_RDATA_31_0,
+ PMIF_SWINF_3_ACC,
+ PMIF_SWINF_3_VLD_CLR,
+};
+
+static const u32 mt6873_regs[] = {
+ [PMIF_INIT_DONE] = 0x0000,
+ [PMIF_INF_EN] = 0x0024,
+ [PMIF_ARB_EN] = 0x0150,
+ [PMIF_CMDISSUE_EN] = 0x03B4,
+ [PMIF_TIMER_CTRL] = 0x03E0,
+ [PMIF_SPI_MODE_CTRL] = 0x0400,
+ [PMIF_IRQ_EVENT_EN_0] = 0x0418,
+ [PMIF_IRQ_FLAG_0] = 0x0420,
+ [PMIF_IRQ_CLR_0] = 0x0424,
+ [PMIF_IRQ_EVENT_EN_1] = 0x0428,
+ [PMIF_IRQ_FLAG_1] = 0x0430,
+ [PMIF_IRQ_CLR_1] = 0x0434,
+ [PMIF_IRQ_EVENT_EN_2] = 0x0438,
+ [PMIF_IRQ_FLAG_2] = 0x0440,
+ [PMIF_IRQ_CLR_2] = 0x0444,
+ [PMIF_IRQ_EVENT_EN_3] = 0x0448,
+ [PMIF_IRQ_FLAG_3] = 0x0450,
+ [PMIF_IRQ_CLR_3] = 0x0454,
+ [PMIF_IRQ_EVENT_EN_4] = 0x0458,
+ [PMIF_IRQ_FLAG_4] = 0x0460,
+ [PMIF_IRQ_CLR_4] = 0x0464,
+ [PMIF_WDT_EVENT_EN_0] = 0x046C,
+ [PMIF_WDT_FLAG_0] = 0x0470,
+ [PMIF_WDT_EVENT_EN_1] = 0x0474,
+ [PMIF_WDT_FLAG_1] = 0x0478,
+ [PMIF_SWINF_0_ACC] = 0x0C00,
+ [PMIF_SWINF_0_WDATA_31_0] = 0x0C04,
+ [PMIF_SWINF_0_RDATA_31_0] = 0x0C14,
+ [PMIF_SWINF_0_VLD_CLR] = 0x0C24,
+ [PMIF_SWINF_0_STA] = 0x0C28,
+ [PMIF_SWINF_1_ACC] = 0x0C40,
+ [PMIF_SWINF_1_WDATA_31_0] = 0x0C44,
+ [PMIF_SWINF_1_RDATA_31_0] = 0x0C54,
+ [PMIF_SWINF_1_VLD_CLR] = 0x0C64,
+ [PMIF_SWINF_1_STA] = 0x0C68,
+ [PMIF_SWINF_2_ACC] = 0x0C80,
+ [PMIF_SWINF_2_WDATA_31_0] = 0x0C84,
+ [PMIF_SWINF_2_RDATA_31_0] = 0x0C94,
+ [PMIF_SWINF_2_VLD_CLR] = 0x0CA4,
+ [PMIF_SWINF_2_STA] = 0x0CA8,
+ [PMIF_SWINF_3_ACC] = 0x0CC0,
+ [PMIF_SWINF_3_WDATA_31_0] = 0x0CC4,
+ [PMIF_SWINF_3_RDATA_31_0] = 0x0CD4,
+ [PMIF_SWINF_3_VLD_CLR] = 0x0CE4,
+ [PMIF_SWINF_3_STA] = 0x0CE8,
+};
+
+enum spmi_regs {
+ SPMI_OP_ST_CTRL,
+ SPMI_GRP_ID_EN,
+ SPMI_OP_ST_STA,
+ SPMI_MST_SAMPL,
+ SPMI_MST_REQ_EN,
+ SPMI_REC_CTRL,
+ SPMI_REC0,
+ SPMI_REC1,
+ SPMI_REC2,
+ SPMI_REC3,
+ SPMI_REC4,
+ SPMI_MST_DBG,
+};
+
+static const u32 mt6873_spmi_regs[] = {
+ [SPMI_OP_ST_CTRL] = 0x0000,
+ [SPMI_GRP_ID_EN] = 0x0004,
+ [SPMI_OP_ST_STA] = 0x0008,
+ [SPMI_MST_SAMPL] = 0x000c,
+ [SPMI_MST_REQ_EN] = 0x0010,
+ [SPMI_REC_CTRL] = 0x0040,
+ [SPMI_REC0] = 0x0044,
+ [SPMI_REC1] = 0x0048,
+ [SPMI_REC2] = 0x004c,
+ [SPMI_REC3] = 0x0050,
+ [SPMI_REC4] = 0x0054,
+ [SPMI_MST_DBG] = 0x00fc,
+};
+
+static u32 pmif_readl(struct pmif *arb, enum pmif_regs reg)
+{
+ return readl(arb->base + arb->data->regs[reg]);
+}
+
+static void pmif_writel(struct pmif *arb, u32 val, enum pmif_regs reg)
+{
+ writel(val, arb->base + arb->data->regs[reg]);
+}
+
+static void mtk_spmi_writel(struct pmif *arb, u32 val, enum spmi_regs reg)
+{
+ writel(val, arb->spmimst_base + arb->data->spmimst_regs[reg]);
+}
+
+static bool pmif_is_fsm_vldclr(struct pmif *arb)
+{
+ u32 reg_rdata;
+
+ reg_rdata = pmif_readl(arb, arb->chan.ch_sta);
+
+ return GET_SWINF(reg_rdata) == SWINF_WFVLDCLR;
+}
+
+static int pmif_arb_cmd(struct spmi_controller *ctrl, u8 opc, u8 sid)
+{
+ struct pmif *arb = spmi_controller_get_drvdata(ctrl);
+ u32 rdata, cmd;
+ int ret;
+
+ /* Check the opcode */
+ if (opc < SPMI_CMD_RESET || opc > SPMI_CMD_WAKEUP)
+ return -EINVAL;
+
+ cmd = opc - SPMI_CMD_RESET;
+
+ mtk_spmi_writel(arb, (cmd << 0x4) | sid, SPMI_OP_ST_CTRL);
+ ret = readl_poll_timeout_atomic(arb->spmimst_base + arb->data->spmimst_regs[SPMI_OP_ST_STA],
+ rdata, (rdata & SPMI_OP_ST_BUSY) == SPMI_OP_ST_BUSY,
+ PMIF_DELAY_US, PMIF_TIMEOUT_US);
+ if (ret < 0)
+ dev_err(&ctrl->dev, "timeout, err = %d\n", ret);
+
+ return ret;
+}
+
+static int pmif_spmi_read_cmd(struct spmi_controller *ctrl, u8 opc, u8 sid,
+ u16 addr, u8 *buf, size_t len)
+{
+ struct pmif *arb = spmi_controller_get_drvdata(ctrl);
+ struct ch_reg *inf_reg;
+ int ret;
+ u32 data, cmd;
+
+ /* Check for argument validation. */
+ if (sid & ~0xf) {
+ dev_err(&ctrl->dev, "exceed the max slv id\n");
+ return -EINVAL;
+ }
+
+ if (len > 4) {
+ dev_err(&ctrl->dev, "pmif supports 1..4 bytes per trans, but:%zu requested", len);
+
+ return -EINVAL;
+ }
+
+ if (opc >= 0x60 && opc <= 0x7f)
+ opc = PMIF_CMD_REG;
+ else if ((opc >= 0x20 && opc <= 0x2f) || (opc >= 0x38 && opc <= 0x3f))
+ opc = PMIF_CMD_EXT_REG_LONG;
+ else
+ return -EINVAL;
+
+ /* Wait for Software Interface FSM state to be IDLE. */
+ inf_reg = &arb->chan;
+ ret = readl_poll_timeout_atomic(arb->base + arb->data->regs[inf_reg->ch_sta],
+ data, GET_SWINF(data) == SWINF_IDLE,
+ PMIF_DELAY_US, PMIF_TIMEOUT_US);
+ if (ret < 0) {
+ /* set channel ready if the data has transferred */
+ if (pmif_is_fsm_vldclr(arb))
+ pmif_writel(arb, 1, inf_reg->ch_rdy);
+ dev_err(&ctrl->dev, "failed to wait for SWINF_IDLE\n");
+ goto out;
+ }
+
+ /* Send the command. */
+ cmd = (opc << 30) | (sid << 24) | ((len - 1) << 16) | addr;
+ pmif_writel(arb, cmd, inf_reg->ch_send);
+
+ /*
+ * Wait for Software Interface FSM state to be WFVLDCLR,
+ * read the data and clear the valid flag.
+ */
+ ret = readl_poll_timeout_atomic(arb->base + arb->data->regs[inf_reg->ch_sta],
+ data, GET_SWINF(data) == SWINF_WFVLDCLR,
+ PMIF_DELAY_US, PMIF_TIMEOUT_US);
+ if (ret < 0) {
+ dev_err(&ctrl->dev, "failed to wait for SWINF_WFVLDCLR\n");
+ goto out;
+ }
+
+ data = pmif_readl(arb, inf_reg->rdata);
+ memcpy(buf, &data, len);
+ pmif_writel(arb, 1, inf_reg->ch_rdy);
+
+out:
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static int pmif_spmi_write_cmd(struct spmi_controller *ctrl, u8 opc, u8 sid,
+ u16 addr, const u8 *buf, size_t len)
+{
+ struct pmif *arb = spmi_controller_get_drvdata(ctrl);
+ struct ch_reg *inf_reg;
+ int ret;
+ u32 data, cmd;
+
+ if (len > 4) {
+ dev_err(&ctrl->dev, "pmif supports 1..4 bytes per trans, but:%zu requested", len);
+
+ return -EINVAL;
+ }
+
+ /* Check the opcode */
+ if (opc >= 0x40 && opc <= 0x5F)
+ opc = PMIF_CMD_REG;
+ else if ((opc <= 0xF) || (opc >= 0x30 && opc <= 0x37))
+ opc = PMIF_CMD_EXT_REG_LONG;
+ else if (opc >= 0x80)
+ opc = PMIF_CMD_REG_0;
+ else
+ return -EINVAL;
+
+ /* Wait for Software Interface FSM state to be IDLE. */
+ inf_reg = &arb->chan;
+ ret = readl_poll_timeout_atomic(arb->base + arb->data->regs[inf_reg->ch_sta],
+ data, GET_SWINF(data) == SWINF_IDLE,
+ PMIF_DELAY_US, PMIF_TIMEOUT_US);
+ if (ret < 0) {
+ /* set channel ready if the data has transferred */
+ if (pmif_is_fsm_vldclr(arb))
+ pmif_writel(arb, 1, inf_reg->ch_rdy);
+ dev_err(&ctrl->dev, "failed to wait for SWINF_IDLE\n");
+ goto out;
+ }
+
+ /* Set the write data. */
+ memcpy(&data, buf, len);
+ pmif_writel(arb, data, inf_reg->wdata);
+
+ /* Send the command. */
+ cmd = (opc << 30) | BIT(29) | (sid << 24) | ((len - 1) << 16) | addr;
+ pmif_writel(arb, cmd, inf_reg->ch_send);
+
+out:
+ return ret;
+}
+
+static const struct pmif_data mt6873_pmif_arb = {
+ .regs = mt6873_regs,
+ .spmimst_regs = mt6873_spmi_regs,
+ .soc_chan = 2,
+};
+
+static int mtk_spmi_probe(struct platform_device *pdev)
+{
+ struct pmif *arb;
+ struct spmi_controller *ctrl;
+ int err, i;
+ u32 chan_offset;
+
+ ctrl = spmi_controller_alloc(&pdev->dev, sizeof(*arb));
+ if (!ctrl)
+ return -ENOMEM;
+
+ arb = spmi_controller_get_drvdata(ctrl);
+ arb->data = device_get_match_data(&pdev->dev);
+ if (!arb->data) {
+ err = -EINVAL;
+ dev_err(&pdev->dev, "Cannot get drv_data\n");
+ goto err_put_ctrl;
+ }
+
+ arb->base = devm_platform_ioremap_resource_byname(pdev, "pmif");
+ if (IS_ERR(arb->base)) {
+ err = PTR_ERR(arb->base);
+ goto err_put_ctrl;
+ }
+
+ arb->spmimst_base = devm_platform_ioremap_resource_byname(pdev, "spmimst");
+ if (IS_ERR(arb->spmimst_base)) {
+ err = PTR_ERR(arb->spmimst_base);
+ goto err_put_ctrl;
+ }
+
+ arb->nclks = ARRAY_SIZE(pmif_clock_names);
+ for (i = 0; i < arb->nclks; i++)
+ arb->clks[i].id = pmif_clock_names[i];
+
+ err = devm_clk_bulk_get(&pdev->dev, arb->nclks, arb->clks);
+ if (err) {
+ dev_err(&pdev->dev, "Failed to get clocks: %d\n", err);
+ goto err_put_ctrl;
+ }
+
+ err = clk_bulk_prepare_enable(arb->nclks, arb->clks);
+ if (err) {
+ dev_err(&pdev->dev, "Failed to enable clocks: %d\n", err);
+ goto err_put_ctrl;
+ }
+
+ ctrl->cmd = pmif_arb_cmd;
+ ctrl->read_cmd = pmif_spmi_read_cmd;
+ ctrl->write_cmd = pmif_spmi_write_cmd;
+
+ chan_offset = PMIF_CHAN_OFFSET * arb->data->soc_chan;
+ arb->chan.ch_sta = PMIF_SWINF_0_STA + chan_offset;
+ arb->chan.wdata = PMIF_SWINF_0_WDATA_31_0 + chan_offset;
+ arb->chan.rdata = PMIF_SWINF_0_RDATA_31_0 + chan_offset;
+ arb->chan.ch_send = PMIF_SWINF_0_ACC + chan_offset;
+ arb->chan.ch_rdy = PMIF_SWINF_0_VLD_CLR + chan_offset;
+
+ platform_set_drvdata(pdev, ctrl);
+
+ err = spmi_controller_add(ctrl);
+ if (err)
+ goto err_domain_remove;
+
+ return 0;
+
+err_domain_remove:
+ clk_bulk_disable_unprepare(arb->nclks, arb->clks);
+err_put_ctrl:
+ spmi_controller_put(ctrl);
+ return err;
+}
+
+static int mtk_spmi_remove(struct platform_device *pdev)
+{
+ struct spmi_controller *ctrl = platform_get_drvdata(pdev);
+ struct pmif *arb = spmi_controller_get_drvdata(ctrl);
+
+ clk_bulk_disable_unprepare(arb->nclks, arb->clks);
+ spmi_controller_remove(ctrl);
+ spmi_controller_put(ctrl);
+ return 0;
+}
+
+static const struct of_device_id mtk_spmi_match_table[] = {
+ {
+ .compatible = "mediatek,mt6873-spmi",
+ .data = &mt6873_pmif_arb,
+ }, {
+ /* sentinel */
+ },
+};
+MODULE_DEVICE_TABLE(of, mtk_spmi_match_table);
+
+static struct platform_driver mtk_spmi_driver = {
+ .driver = {
+ .name = "spmi-mtk",
+ .of_match_table = of_match_ptr(mtk_spmi_match_table),
+ },
+ .probe = mtk_spmi_probe,
+ .remove = mtk_spmi_remove,
+};
+module_platform_driver(mtk_spmi_driver);
+
+MODULE_AUTHOR("Hsin-Hsiung Wang <[email protected]>");
+MODULE_DESCRIPTION("MediaTek SPMI Driver");
+MODULE_LICENSE("GPL");
--
2.18.0
The constraint of 'maxItem: 1' might be larger than 1, so we modify it
to 'minItem: 1'.
Signed-off-by: Hsin-Hsiung Wang <[email protected]>
Acked-by: Rob Herring <[email protected]>
---
changes since v11:
- No change.
---
Documentation/devicetree/bindings/spmi/spmi.yaml | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/spmi/spmi.yaml b/Documentation/devicetree/bindings/spmi/spmi.yaml
index 1d243faef2f8..5938d807674f 100644
--- a/Documentation/devicetree/bindings/spmi/spmi.yaml
+++ b/Documentation/devicetree/bindings/spmi/spmi.yaml
@@ -25,7 +25,7 @@ properties:
pattern: "^spmi@.*"
reg:
- maxItems: 1
+ minItems: 1
"#address-cells":
const: 2
--
2.18.0
Add spmi node to SOC MT8192.
Signed-off-by: Hsin-Hsiung Wang <[email protected]>
---
changes since v11:
- No change.
---
arch/arm64/boot/dts/mediatek/mt8192.dtsi | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8192.dtsi b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
index 9810f1d441da..1237e3624e44 100644
--- a/arch/arm64/boot/dts/mediatek/mt8192.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
@@ -316,6 +316,23 @@
clock-names = "clk13m";
};
+ spmi: spmi@10027000 {
+ compatible = "mediatek,mt6873-spmi";
+ reg = <0 0x10027000 0 0x000e00>,
+ <0 0x10029000 0 0x000100>;
+ reg-names = "pmif", "spmimst";
+ clocks = <&infracfg CLK_INFRA_PMIC_AP>,
+ <&infracfg CLK_INFRA_PMIC_TMR>,
+ <&topckgen CLK_TOP_SPMI_MST_SEL>;
+ clock-names = "pmif_sys_ck",
+ "pmif_tmr_ck",
+ "spmimst_clk_mux";
+ assigned-clocks = <&topckgen CLK_TOP_PWRAP_ULPOSC_SEL>;
+ assigned-clock-parents = <&topckgen CLK_TOP_OSC_D10>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ };
+
scp_adsp: clock-controller@10720000 {
compatible = "mediatek,mt8192-scp_adsp";
reg = <0 0x10720000 0 0x1000>;
--
2.18.0
Quoting Hsin-Hsiung Wang (2021-09-14 02:03:33)
> This series adds support for new SoC MT6873/MT8192/MT8195 to the spmi driver.
> This series is based on Chun-Jie's patches[1].
>
> [1] https://patchwork.kernel.org/project/linux-mediatek/list/?series=521655
>
> changes since v11:
> - rebase to v5.15-rc1.
>
> Henry Chen (1):
> spmi: mediatek: Add support for MT8195
>
> Hsin-Hsiung Wang (4):
> dt-bindings: spmi: modify the constraint 'maxItems' to 'minItems'
> dt-bindings: spmi: document binding for the Mediatek SPMI controller
> spmi: mediatek: Add support for MT6873/8192
> arm64: dts: mt8192: add spmi node
Please drop the dts patch from the series so I can easily pick up the
whole lot. Also fix the binding problem reported by Rob. Otherwise the
patches look OK to me.
> Add spmi support for MT6873/8192.
>
> Signed-off-by: Hsin-Hsiung Wang <[email protected]>
> ---
> changes since v11:
> - No change.
> ---
> drivers/spmi/Kconfig | 10 +
> drivers/spmi/Makefile | 2 +
> drivers/spmi/spmi-mtk-pmif.c | 459 +++++++++++++++++++++++++++++++++++
> 3 files changed, 471 insertions(+)
> create mode 100644 drivers/spmi/spmi-mtk-pmif.c
>
> diff --git a/drivers/spmi/Kconfig b/drivers/spmi/Kconfig
> index 2874b6c26028..ea5703f6e544 100644
> --- a/drivers/spmi/Kconfig
> +++ b/drivers/spmi/Kconfig
> @@ -34,4 +34,14 @@ config SPMI_MSM_PMIC_ARB
> This is required for communicating with Qualcomm PMICs and
> other devices that have the SPMI interface.
>
> +config SPMI_MTK_PMIF
> + tristate "Mediatek SPMI Controller (PMIC Arbiter)"
This driver should be useless without a MediaTek SoC, for which reason, I would
add here a nice
depends on ARCH_MEDIATEK || COMPILE_TEST
> + help
> + If you say yes to this option, support will be included for the
> + built-in SPMI PMIC Arbiter interface on Mediatek family
> + processors.
> +
> + This is required for communicating with Mediatek PMICs and
> + other devices that have the SPMI interface.
> +
> endif
> diff --git a/drivers/spmi/Makefile b/drivers/spmi/Makefile
> index 6e092e6f290c..0b21aaffcbb9 100644
> --- a/drivers/spmi/Makefile
> +++ b/drivers/spmi/Makefile
> @@ -6,3 +6,5 @@ obj-$(CONFIG_SPMI) += spmi.o
>
> obj-$(CONFIG_SPMI_HISI3670) += hisi-spmi-controller.o
> obj-$(CONFIG_SPMI_MSM_PMIC_ARB) += spmi-pmic-arb.o
> +obj-$(CONFIG_SPMI_MTK_PMIF) += spmi-mtk-pmif.o
> +
> diff --git a/drivers/spmi/spmi-mtk-pmif.c b/drivers/spmi/spmi-mtk-pmif.c
> new file mode 100644
> index 000000000000..35d338a19d76
> --- /dev/null
> +++ b/drivers/spmi/spmi-mtk-pmif.c
> @@ -0,0 +1,459 @@
> +// SPDX-License-Identifier: GPL-2.0
> +//
> +// Copyright (c) 2021 MediaTek Inc.
> +
> +#include <linux/clk.h>
> +#include <linux/iopoll.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/property.h>
> +#include <linux/spmi.h>
> +
> +#define SWINF_IDLE 0x00
> +#define SWINF_WFVLDCLR 0x06
> +
> +#define GET_SWINF(x) (((x) >> 1) & 0x7)
> +
> +#define PMIF_CMD_REG_0 0
> +#define PMIF_CMD_REG 1
> +#define PMIF_CMD_EXT_REG 2
> +#define PMIF_CMD_EXT_REG_LONG 3
> +
> +#define PMIF_DELAY_US 10
> +#define PMIF_TIMEOUT_US (10 * 1000)
> +
> +#define PMIF_CHAN_OFFSET 0x5
> +
> +#define PMIF_MAX_CLKS 3
> +
> +#define SPMI_OP_ST_BUSY 1
> +
> +struct ch_reg {
> + u32 ch_sta;
> + u32 wdata;
> + u32 rdata;
> + u32 ch_send;
> + u32 ch_rdy;
> +};
> +
> +struct pmif_data {
> + const u32 *regs;
> + const u32 *spmimst_regs;
> + u32 soc_chan;
> +};
> +
> +struct pmif {
> + void __iomem *base;
> + void __iomem *spmimst_base;
> + struct ch_reg chan;
> + struct clk_bulk_data clks[PMIF_MAX_CLKS];
> + size_t nclks;
> + const struct pmif_data *data;
> +};
> +
> +static const char * const pmif_clock_names[] = {
> + "pmif_sys_ck", "pmif_tmr_ck", "spmimst_clk_mux",
> +};
> +
> +enum pmif_regs {
> + PMIF_INIT_DONE,
> + PMIF_INF_EN,
> + PMIF_ARB_EN,
> + PMIF_CMDISSUE_EN,
> + PMIF_TIMER_CTRL,
> + PMIF_SPI_MODE_CTRL,
> + PMIF_IRQ_EVENT_EN_0,
> + PMIF_IRQ_FLAG_0,
> + PMIF_IRQ_CLR_0,
> + PMIF_IRQ_EVENT_EN_1,
> + PMIF_IRQ_FLAG_1,
> + PMIF_IRQ_CLR_1,
> + PMIF_IRQ_EVENT_EN_2,
> + PMIF_IRQ_FLAG_2,
> + PMIF_IRQ_CLR_2,
> + PMIF_IRQ_EVENT_EN_3,
> + PMIF_IRQ_FLAG_3,
> + PMIF_IRQ_CLR_3,
> + PMIF_IRQ_EVENT_EN_4,
> + PMIF_IRQ_FLAG_4,
> + PMIF_IRQ_CLR_4,
> + PMIF_WDT_EVENT_EN_0,
> + PMIF_WDT_FLAG_0,
> + PMIF_WDT_EVENT_EN_1,
> + PMIF_WDT_FLAG_1,
> + PMIF_SWINF_0_STA,
> + PMIF_SWINF_0_WDATA_31_0,
> + PMIF_SWINF_0_RDATA_31_0,
> + PMIF_SWINF_0_ACC,
> + PMIF_SWINF_0_VLD_CLR,
> + PMIF_SWINF_1_STA,
> + PMIF_SWINF_1_WDATA_31_0,
> + PMIF_SWINF_1_RDATA_31_0,
> + PMIF_SWINF_1_ACC,
> + PMIF_SWINF_1_VLD_CLR,
> + PMIF_SWINF_2_STA,
> + PMIF_SWINF_2_WDATA_31_0,
> + PMIF_SWINF_2_RDATA_31_0,
> + PMIF_SWINF_2_ACC,
> + PMIF_SWINF_2_VLD_CLR,
> + PMIF_SWINF_3_STA,
> + PMIF_SWINF_3_WDATA_31_0,
> + PMIF_SWINF_3_RDATA_31_0,
> + PMIF_SWINF_3_ACC,
> + PMIF_SWINF_3_VLD_CLR,
> +};
> +
> +static const u32 mt6873_regs[] = {
> + [PMIF_INIT_DONE] = 0x0000,
> + [PMIF_INF_EN] = 0x0024,
> + [PMIF_ARB_EN] = 0x0150,
> + [PMIF_CMDISSUE_EN] = 0x03B4,
> + [PMIF_TIMER_CTRL] = 0x03E0,
> + [PMIF_SPI_MODE_CTRL] = 0x0400,
> + [PMIF_IRQ_EVENT_EN_0] = 0x0418,
> + [PMIF_IRQ_FLAG_0] = 0x0420,
> + [PMIF_IRQ_CLR_0] = 0x0424,
> + [PMIF_IRQ_EVENT_EN_1] = 0x0428,
> + [PMIF_IRQ_FLAG_1] = 0x0430,
> + [PMIF_IRQ_CLR_1] = 0x0434,
> + [PMIF_IRQ_EVENT_EN_2] = 0x0438,
> + [PMIF_IRQ_FLAG_2] = 0x0440,
> + [PMIF_IRQ_CLR_2] = 0x0444,
> + [PMIF_IRQ_EVENT_EN_3] = 0x0448,
> + [PMIF_IRQ_FLAG_3] = 0x0450,
> + [PMIF_IRQ_CLR_3] = 0x0454,
> + [PMIF_IRQ_EVENT_EN_4] = 0x0458,
> + [PMIF_IRQ_FLAG_4] = 0x0460,
> + [PMIF_IRQ_CLR_4] = 0x0464,
> + [PMIF_WDT_EVENT_EN_0] = 0x046C,
> + [PMIF_WDT_FLAG_0] = 0x0470,
> + [PMIF_WDT_EVENT_EN_1] = 0x0474,
> + [PMIF_WDT_FLAG_1] = 0x0478,
> + [PMIF_SWINF_0_ACC] = 0x0C00,
> + [PMIF_SWINF_0_WDATA_31_0] = 0x0C04,
> + [PMIF_SWINF_0_RDATA_31_0] = 0x0C14,
> + [PMIF_SWINF_0_VLD_CLR] = 0x0C24,
> + [PMIF_SWINF_0_STA] = 0x0C28,
> + [PMIF_SWINF_1_ACC] = 0x0C40,
> + [PMIF_SWINF_1_WDATA_31_0] = 0x0C44,
> + [PMIF_SWINF_1_RDATA_31_0] = 0x0C54,
> + [PMIF_SWINF_1_VLD_CLR] = 0x0C64,
> + [PMIF_SWINF_1_STA] = 0x0C68,
> + [PMIF_SWINF_2_ACC] = 0x0C80,
> + [PMIF_SWINF_2_WDATA_31_0] = 0x0C84,
> + [PMIF_SWINF_2_RDATA_31_0] = 0x0C94,
> + [PMIF_SWINF_2_VLD_CLR] = 0x0CA4,
> + [PMIF_SWINF_2_STA] = 0x0CA8,
> + [PMIF_SWINF_3_ACC] = 0x0CC0,
> + [PMIF_SWINF_3_WDATA_31_0] = 0x0CC4,
> + [PMIF_SWINF_3_RDATA_31_0] = 0x0CD4,
> + [PMIF_SWINF_3_VLD_CLR] = 0x0CE4,
> + [PMIF_SWINF_3_STA] = 0x0CE8,
> +};
Hello!
Can you please either use simply a space, or fix your tabulations indentation?
> +
> +enum spmi_regs {
> + SPMI_OP_ST_CTRL,
> + SPMI_GRP_ID_EN,
> + SPMI_OP_ST_STA,
> + SPMI_MST_SAMPL,
> + SPMI_MST_REQ_EN,
> + SPMI_REC_CTRL,
> + SPMI_REC0,
> + SPMI_REC1,
> + SPMI_REC2,
> + SPMI_REC3,
> + SPMI_REC4,
> + SPMI_MST_DBG,
> +};
> +
> +static const u32 mt6873_spmi_regs[] = {
> + [SPMI_OP_ST_CTRL] = 0x0000,
> + [SPMI_GRP_ID_EN] = 0x0004,
> + [SPMI_OP_ST_STA] = 0x0008,
> + [SPMI_MST_SAMPL] = 0x000c,
> + [SPMI_MST_REQ_EN] = 0x0010,
> + [SPMI_REC_CTRL] = 0x0040,
> + [SPMI_REC0] = 0x0044,
> + [SPMI_REC1] = 0x0048,
> + [SPMI_REC2] = 0x004c,
> + [SPMI_REC3] = 0x0050,
> + [SPMI_REC4] = 0x0054,
> + [SPMI_MST_DBG] = 0x00fc,
> +};
> +
> +static u32 pmif_readl(struct pmif *arb, enum pmif_regs reg)
> +{
> + return readl(arb->base + arb->data->regs[reg]);
> +}
> +
> +static void pmif_writel(struct pmif *arb, u32 val, enum pmif_regs reg)
> +{
> + writel(val, arb->base + arb->data->regs[reg]);
> +}
> +
> +static void mtk_spmi_writel(struct pmif *arb, u32 val, enum spmi_regs reg)
> +{
> + writel(val, arb->spmimst_base + arb->data->spmimst_regs[reg]);
> +}
> +
> +static bool pmif_is_fsm_vldclr(struct pmif *arb)
> +{
> + u32 reg_rdata;
> +
> + reg_rdata = pmif_readl(arb, arb->chan.ch_sta);
> +
> + return GET_SWINF(reg_rdata) == SWINF_WFVLDCLR;
> +}
> +
> +static int pmif_arb_cmd(struct spmi_controller *ctrl, u8 opc, u8 sid)
> +{
> + struct pmif *arb = spmi_controller_get_drvdata(ctrl);
> + u32 rdata, cmd;
> + int ret;
> +
> + /* Check the opcode */
> + if (opc < SPMI_CMD_RESET || opc > SPMI_CMD_WAKEUP)
> + return -EINVAL;
> +
> + cmd = opc - SPMI_CMD_RESET;
> +
> + mtk_spmi_writel(arb, (cmd << 0x4) | sid, SPMI_OP_ST_CTRL);
> + ret = readl_poll_timeout_atomic(arb->spmimst_base + arb->data->spmimst_regs[SPMI_OP_ST_STA],
> + rdata, (rdata & SPMI_OP_ST_BUSY) == SPMI_OP_ST_BUSY,
> + PMIF_DELAY_US, PMIF_TIMEOUT_US);
> + if (ret < 0)
> + dev_err(&ctrl->dev, "timeout, err = %d\n", ret);
> +
> + return ret;
> +}
> +
> +static int pmif_spmi_read_cmd(struct spmi_controller *ctrl, u8 opc, u8 sid,
> + u16 addr, u8 *buf, size_t len)
> +{
> + struct pmif *arb = spmi_controller_get_drvdata(ctrl);
> + struct ch_reg *inf_reg;
> + int ret;
> + u32 data, cmd;
> +
> + /* Check for argument validation. */
> + if (sid & ~0xf) {
> + dev_err(&ctrl->dev, "exceed the max slv id\n");
> + return -EINVAL;
> + }
> +
> + if (len > 4) {
> + dev_err(&ctrl->dev, "pmif supports 1..4 bytes per trans, but:%zu requested", len);
> +
> + return -EINVAL;
> + }
> +
> + if (opc >= 0x60 && opc <= 0x7f)
> + opc = PMIF_CMD_REG;
> + else if ((opc >= 0x20 && opc <= 0x2f) || (opc >= 0x38 && opc <= 0x3f))
> + opc = PMIF_CMD_EXT_REG_LONG;
> + else
> + return -EINVAL;
> +
> + /* Wait for Software Interface FSM state to be IDLE. */
> + inf_reg = &arb->chan;
> + ret = readl_poll_timeout_atomic(arb->base + arb->data->regs[inf_reg->ch_sta],
> + data, GET_SWINF(data) == SWINF_IDLE,
> + PMIF_DELAY_US, PMIF_TIMEOUT_US);
> + if (ret < 0) {
> + /* set channel ready if the data has transferred */
> + if (pmif_is_fsm_vldclr(arb))
> + pmif_writel(arb, 1, inf_reg->ch_rdy);
> + dev_err(&ctrl->dev, "failed to wait for SWINF_IDLE\n");
> + goto out;
You can just return ret here, instead of jumping to the out label.
> + }
> +
> + /* Send the command. */
> + cmd = (opc << 30) | (sid << 24) | ((len - 1) << 16) | addr;
> + pmif_writel(arb, cmd, inf_reg->ch_send);
> +
> + /*
> + * Wait for Software Interface FSM state to be WFVLDCLR,
> + * read the data and clear the valid flag.
> + */
> + ret = readl_poll_timeout_atomic(arb->base + arb->data->regs[inf_reg->ch_sta],
> + data, GET_SWINF(data) == SWINF_WFVLDCLR,
> + PMIF_DELAY_US, PMIF_TIMEOUT_US);
> + if (ret < 0) {
> + dev_err(&ctrl->dev, "failed to wait for SWINF_WFVLDCLR\n");
> + goto out;
Same here
> + }
> +
> + data = pmif_readl(arb, inf_reg->rdata);
> + memcpy(buf, &data, len);
> + pmif_writel(arb, 1, inf_reg->ch_rdy);
> +
> +out:
> + if (ret < 0)
> + return ret;
...and after the fixes, you won't need this label, nor this check here anymore.
> +
> + return 0;
> +}
> +
> +static int pmif_spmi_write_cmd(struct spmi_controller *ctrl, u8 opc, u8 sid,
> + u16 addr, const u8 *buf, size_t len)
> +{
> + struct pmif *arb = spmi_controller_get_drvdata(ctrl);
> + struct ch_reg *inf_reg;
> + int ret;
> + u32 data, cmd;
> +
> + if (len > 4) {
> + dev_err(&ctrl->dev, "pmif supports 1..4 bytes per trans, but:%zu requested", len);
> +
> + return -EINVAL;
> + }
> +
> + /* Check the opcode */
> + if (opc >= 0x40 && opc <= 0x5F)
> + opc = PMIF_CMD_REG;
> + else if ((opc <= 0xF) || (opc >= 0x30 && opc <= 0x37))
> + opc = PMIF_CMD_EXT_REG_LONG;
> + else if (opc >= 0x80)
> + opc = PMIF_CMD_REG_0;
> + else
> + return -EINVAL;
> +
> + /* Wait for Software Interface FSM state to be IDLE. */
> + inf_reg = &arb->chan;
> + ret = readl_poll_timeout_atomic(arb->base + arb->data->regs[inf_reg->ch_sta],
> + data, GET_SWINF(data) == SWINF_IDLE,
> + PMIF_DELAY_US, PMIF_TIMEOUT_US);
> + if (ret < 0) {
> + /* set channel ready if the data has transferred */
> + if (pmif_is_fsm_vldclr(arb))
> + pmif_writel(arb, 1, inf_reg->ch_rdy);
> + dev_err(&ctrl->dev, "failed to wait for SWINF_IDLE\n");
> + goto out;
Just return ret here.
> + }
> +
> + /* Set the write data. */
> + memcpy(&data, buf, len);
> + pmif_writel(arb, data, inf_reg->wdata);
> +
> + /* Send the command. */
> + cmd = (opc << 30) | BIT(29) | (sid << 24) | ((len - 1) << 16) | addr;
> + pmif_writel(arb, cmd, inf_reg->ch_send);
> +
> +out:
...and this label can then also disappear.
After these fixes,
Acked-By: AngeloGioacchino Del Regno <[email protected]>
> From: Henry Chen <[email protected]>
>
> Add spmi support for MT8195.
>
> Signed-off-by: Henry Chen <[email protected]>
> Signed-off-by: Hsin-Hsiung Wang <[email protected]>
Acked-By: AngeloGioacchino Del Regno <[email protected]>