From: "Yipeng Chen (Jasber)" <[email protected]>
[Why]
Enabled ABM (level != 0) would raise short pulse irq DC_IRQ_SOURCE_HPD1RX
randomly with PSR error LINK_CRC_ERROR. Actually there is no hot plugging
on EDP panel. After correcting CRC error, there is no need to send drm
hotplug event.
[How]
Returning false would skip doing hot-plug when handle_hpd_irq_psr_sink()
handled irq. Hot-plug process causes visible flicking on overlay.
Signed-off-by: Yipeng Chen (Jasber) <[email protected]>
Reviewed-by: Roman Li <[email protected]>
Reviewed-by: Anthony Koo <[email protected]>
---
drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
index 1e4794e2825c..9b9fbe5e9bd4 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
@@ -3007,7 +3007,7 @@ bool dc_link_handle_hpd_rx_irq(struct dc_link *link, union hpd_irq_data *out_hpd
if (handle_hpd_irq_psr_sink(link))
/* PSR-related error was detected and handled */
- return true;
+ return false;
/* If PSR-related error handled, Main link may be off,
* so do not handle as a normal sink status change interrupt.
--
2.25.1