From: Eli Billauer <[email protected]>
The driver was originally written with the assumption that a different
API must be used for DMA-related functions if the device is PCIe based
or if not. Since Xillybus' driver supports devices on a PCIe bus (with
xillybus_pcie) as well as connected directly to the processor (with
xillybus_of), it originally used wrapper functions that ensure that
a different API is used for each.
This patch eliminates the said wrapper functions, as all use the same
dma_* API now. This is most notable by the code deleted in xillybus_pcie.c
and xillybus_of.c.
It also eliminates the OF driver's check for a "dma-coherent" attribute
in the device's OF entry, since this is taken care of by the kernel's
implementation of dma_sync_single_for_*().
There is however still need for one wrapper function, which is merged
from xillybus_pcie.c and xillybus_of.c into xillybus_core.c: The call to
dma_map_single() is wrapped by a function that uses the Managed Device
(devres) framework, in the absence of a relevant function in the current
kernel's API.
Suggested-by: Christophe JAILLET <[email protected]>
Suggested-by: Arnd Bergmann <[email protected]>
Signed-off-by: Eli Billauer <[email protected]>
---
Notes:
Changelog:
v2
-- Eliminate the OF driver's check for a "dma-coherent" attribute:
The driver always calls dma_sync_single_for_*(), and the kernel's
implementation of these functions makes sure that nothing is done if
the "dma-coherent" attribute is present for the device. Thanks to Arnd
for pointing this out.
drivers/char/xillybus/xillybus.h | 23 +----
drivers/char/xillybus/xillybus_core.c | 129 ++++++++++++++++----------
drivers/char/xillybus/xillybus_of.c | 86 +----------------
drivers/char/xillybus/xillybus_pcie.c | 90 +-----------------
4 files changed, 86 insertions(+), 242 deletions(-)
diff --git a/drivers/char/xillybus/xillybus.h b/drivers/char/xillybus/xillybus.h
index afce5bb4d127..51de7cbc579e 100644
--- a/drivers/char/xillybus/xillybus.h
+++ b/drivers/char/xillybus/xillybus.h
@@ -88,7 +88,7 @@ struct xilly_channel {
struct xilly_endpoint {
struct device *dev;
- struct xilly_endpoint_hardware *ephw;
+ struct module *owner;
int dma_using_dac; /* =1 if 64-bit DMA is used, =0 otherwise. */
__iomem void *registers;
@@ -108,23 +108,6 @@ struct xilly_endpoint {
unsigned int msg_buf_size;
};
-struct xilly_endpoint_hardware {
- struct module *owner;
- void (*hw_sync_sgl_for_cpu)(struct xilly_endpoint *,
- dma_addr_t,
- size_t,
- int);
- void (*hw_sync_sgl_for_device)(struct xilly_endpoint *,
- dma_addr_t,
- size_t,
- int);
- int (*map_single)(struct xilly_endpoint *,
- void *,
- size_t,
- int,
- dma_addr_t *);
-};
-
struct xilly_mapping {
struct device *device;
dma_addr_t dma_addr;
@@ -134,9 +117,7 @@ struct xilly_mapping {
irqreturn_t xillybus_isr(int irq, void *data);
-struct xilly_endpoint *xillybus_init_endpoint(struct device *dev,
- struct xilly_endpoint_hardware
- *ephw);
+struct xilly_endpoint *xillybus_init_endpoint(struct device *dev);
int xillybus_endpoint_discovery(struct xilly_endpoint *endpoint);
diff --git a/drivers/char/xillybus/xillybus_core.c b/drivers/char/xillybus/xillybus_core.c
index 02f30140c2d5..11b7c4749274 100644
--- a/drivers/char/xillybus/xillybus_core.c
+++ b/drivers/char/xillybus/xillybus_core.c
@@ -122,10 +122,8 @@ irqreturn_t xillybus_isr(int irq, void *data)
buf = ep->msgbuf_addr;
buf_size = ep->msg_buf_size/sizeof(u32);
- ep->ephw->hw_sync_sgl_for_cpu(ep,
- ep->msgbuf_dma_addr,
- ep->msg_buf_size,
- DMA_FROM_DEVICE);
+ dma_sync_single_for_cpu(ep->dev, ep->msgbuf_dma_addr,
+ ep->msg_buf_size, DMA_FROM_DEVICE);
for (i = 0; i < buf_size; i += 2) {
if (((buf[i+1] >> 28) & 0xf) != ep->msg_counter) {
@@ -140,11 +138,10 @@ irqreturn_t xillybus_isr(int irq, void *data)
dev_err(ep->dev,
"Lost sync with interrupt messages. Stopping.\n");
} else {
- ep->ephw->hw_sync_sgl_for_device(
- ep,
- ep->msgbuf_dma_addr,
- ep->msg_buf_size,
- DMA_FROM_DEVICE);
+ dma_sync_single_for_device(ep->dev,
+ ep->msgbuf_dma_addr,
+ ep->msg_buf_size,
+ DMA_FROM_DEVICE);
iowrite32(0x01, /* Message NACK */
ep->registers + fpga_msg_ctrl_reg);
@@ -275,10 +272,8 @@ irqreturn_t xillybus_isr(int irq, void *data)
}
}
- ep->ephw->hw_sync_sgl_for_device(ep,
- ep->msgbuf_dma_addr,
- ep->msg_buf_size,
- DMA_FROM_DEVICE);
+ dma_sync_single_for_device(ep->dev, ep->msgbuf_dma_addr,
+ ep->msg_buf_size, DMA_FROM_DEVICE);
ep->msg_counter = (ep->msg_counter + 1) & 0xf;
ep->failed_messages = 0;
@@ -304,6 +299,47 @@ struct xilly_alloc_state {
u32 regdirection;
};
+static void xilly_unmap(void *ptr)
+{
+ struct xilly_mapping *data = ptr;
+
+ dma_unmap_single(data->device, data->dma_addr,
+ data->size, data->direction);
+
+ kfree(ptr);
+}
+
+static int xilly_map_single(struct xilly_endpoint *ep,
+ void *ptr,
+ size_t size,
+ int direction,
+ dma_addr_t *ret_dma_handle
+ )
+{
+ dma_addr_t addr;
+ struct xilly_mapping *this;
+
+ this = kzalloc(sizeof(*this), GFP_KERNEL);
+ if (!this)
+ return -ENOMEM;
+
+ addr = dma_map_single(ep->dev, ptr, size, direction);
+
+ if (dma_mapping_error(ep->dev, addr)) {
+ kfree(this);
+ return -ENODEV;
+ }
+
+ this->device = ep->dev;
+ this->dma_addr = addr;
+ this->size = size;
+ this->direction = direction;
+
+ *ret_dma_handle = addr;
+
+ return devm_add_action_or_reset(ep->dev, xilly_unmap, this);
+}
+
static int xilly_get_dma_buffers(struct xilly_endpoint *ep,
struct xilly_alloc_state *s,
struct xilly_buffer **buffers,
@@ -355,9 +391,9 @@ static int xilly_get_dma_buffers(struct xilly_endpoint *ep,
s->left_of_salami = allocsize;
}
- rc = ep->ephw->map_single(ep, s->salami,
- bytebufsize, s->direction,
- &dma_addr);
+ rc = xilly_map_single(ep, s->salami,
+ bytebufsize, s->direction,
+ &dma_addr);
if (rc)
return rc;
@@ -620,11 +656,10 @@ static int xilly_obtain_idt(struct xilly_endpoint *endpoint)
return -ENODEV;
}
- endpoint->ephw->hw_sync_sgl_for_cpu(
- channel->endpoint,
- channel->wr_buffers[0]->dma_addr,
- channel->wr_buf_size,
- DMA_FROM_DEVICE);
+ dma_sync_single_for_cpu(channel->endpoint->dev,
+ channel->wr_buffers[0]->dma_addr,
+ channel->wr_buf_size,
+ DMA_FROM_DEVICE);
if (channel->wr_buffers[0]->end_offset != endpoint->idtlen) {
dev_err(endpoint->dev,
@@ -735,11 +770,10 @@ static ssize_t xillybus_read(struct file *filp, char __user *userbuf,
if (!empty) { /* Go on, now without the spinlock */
if (bufpos == 0) /* Position zero means it's virgin */
- channel->endpoint->ephw->hw_sync_sgl_for_cpu(
- channel->endpoint,
- channel->wr_buffers[bufidx]->dma_addr,
- channel->wr_buf_size,
- DMA_FROM_DEVICE);
+ dma_sync_single_for_cpu(channel->endpoint->dev,
+ channel->wr_buffers[bufidx]->dma_addr,
+ channel->wr_buf_size,
+ DMA_FROM_DEVICE);
if (copy_to_user(
userbuf,
@@ -751,11 +785,10 @@ static ssize_t xillybus_read(struct file *filp, char __user *userbuf,
bytes_done += howmany;
if (bufferdone) {
- channel->endpoint->ephw->hw_sync_sgl_for_device(
- channel->endpoint,
- channel->wr_buffers[bufidx]->dma_addr,
- channel->wr_buf_size,
- DMA_FROM_DEVICE);
+ dma_sync_single_for_device(channel->endpoint->dev,
+ channel->wr_buffers[bufidx]->dma_addr,
+ channel->wr_buf_size,
+ DMA_FROM_DEVICE);
/*
* Tell FPGA the buffer is done with. It's an
@@ -1055,11 +1088,10 @@ static int xillybus_myflush(struct xilly_channel *channel, long timeout)
else
channel->rd_host_buf_idx++;
- channel->endpoint->ephw->hw_sync_sgl_for_device(
- channel->endpoint,
- channel->rd_buffers[bufidx]->dma_addr,
- channel->rd_buf_size,
- DMA_TO_DEVICE);
+ dma_sync_single_for_device(channel->endpoint->dev,
+ channel->rd_buffers[bufidx]->dma_addr,
+ channel->rd_buf_size,
+ DMA_TO_DEVICE);
mutex_lock(&channel->endpoint->register_mutex);
@@ -1275,11 +1307,10 @@ static ssize_t xillybus_write(struct file *filp, const char __user *userbuf,
if ((bufpos == 0) || /* Zero means it's virgin */
(channel->rd_leftovers[3] != 0)) {
- channel->endpoint->ephw->hw_sync_sgl_for_cpu(
- channel->endpoint,
- channel->rd_buffers[bufidx]->dma_addr,
- channel->rd_buf_size,
- DMA_TO_DEVICE);
+ dma_sync_single_for_cpu(channel->endpoint->dev,
+ channel->rd_buffers[bufidx]->dma_addr,
+ channel->rd_buf_size,
+ DMA_TO_DEVICE);
/* Virgin, but leftovers are due */
for (i = 0; i < bufpos; i++)
@@ -1297,11 +1328,10 @@ static ssize_t xillybus_write(struct file *filp, const char __user *userbuf,
bytes_done += howmany;
if (bufferdone) {
- channel->endpoint->ephw->hw_sync_sgl_for_device(
- channel->endpoint,
- channel->rd_buffers[bufidx]->dma_addr,
- channel->rd_buf_size,
- DMA_TO_DEVICE);
+ dma_sync_single_for_device(channel->endpoint->dev,
+ channel->rd_buffers[bufidx]->dma_addr,
+ channel->rd_buf_size,
+ DMA_TO_DEVICE);
mutex_lock(&channel->endpoint->register_mutex);
@@ -1772,9 +1802,7 @@ static const struct file_operations xillybus_fops = {
.poll = xillybus_poll,
};
-struct xilly_endpoint *xillybus_init_endpoint(struct device *dev,
- struct xilly_endpoint_hardware
- *ephw)
+struct xilly_endpoint *xillybus_init_endpoint(struct device *dev)
{
struct xilly_endpoint *endpoint;
@@ -1783,7 +1811,6 @@ struct xilly_endpoint *xillybus_init_endpoint(struct device *dev,
return NULL;
endpoint->dev = dev;
- endpoint->ephw = ephw;
endpoint->msg_counter = 0x0b;
endpoint->failed_messages = 0;
endpoint->fatal_error = 0;
@@ -1910,7 +1937,7 @@ int xillybus_endpoint_discovery(struct xilly_endpoint *endpoint)
goto failed_idt;
rc = xillybus_init_chrdev(dev, &xillybus_fops,
- endpoint->ephw->owner, endpoint,
+ endpoint->owner, endpoint,
idt_handle.names,
idt_handle.names_len,
endpoint->num_channels,
diff --git a/drivers/char/xillybus/xillybus_of.c b/drivers/char/xillybus/xillybus_of.c
index 4e6e0c19d8c8..e5372e45d211 100644
--- a/drivers/char/xillybus/xillybus_of.c
+++ b/drivers/char/xillybus/xillybus_of.c
@@ -31,102 +31,22 @@ static const struct of_device_id xillybus_of_match[] = {
MODULE_DEVICE_TABLE(of, xillybus_of_match);
-static void xilly_dma_sync_single_for_cpu_of(struct xilly_endpoint *ep,
- dma_addr_t dma_handle,
- size_t size,
- int direction)
-{
- dma_sync_single_for_cpu(ep->dev, dma_handle, size, direction);
-}
-
-static void xilly_dma_sync_single_for_device_of(struct xilly_endpoint *ep,
- dma_addr_t dma_handle,
- size_t size,
- int direction)
-{
- dma_sync_single_for_device(ep->dev, dma_handle, size, direction);
-}
-
-static void xilly_dma_sync_single_nop(struct xilly_endpoint *ep,
- dma_addr_t dma_handle,
- size_t size,
- int direction)
-{
-}
-
-static void xilly_of_unmap(void *ptr)
-{
- struct xilly_mapping *data = ptr;
-
- dma_unmap_single(data->device, data->dma_addr,
- data->size, data->direction);
-
- kfree(ptr);
-}
-
-static int xilly_map_single_of(struct xilly_endpoint *ep,
- void *ptr,
- size_t size,
- int direction,
- dma_addr_t *ret_dma_handle
- )
-{
- dma_addr_t addr;
- struct xilly_mapping *this;
-
- this = kzalloc(sizeof(*this), GFP_KERNEL);
- if (!this)
- return -ENOMEM;
-
- addr = dma_map_single(ep->dev, ptr, size, direction);
-
- if (dma_mapping_error(ep->dev, addr)) {
- kfree(this);
- return -ENODEV;
- }
-
- this->device = ep->dev;
- this->dma_addr = addr;
- this->size = size;
- this->direction = direction;
-
- *ret_dma_handle = addr;
-
- return devm_add_action_or_reset(ep->dev, xilly_of_unmap, this);
-}
-
-static struct xilly_endpoint_hardware of_hw = {
- .owner = THIS_MODULE,
- .hw_sync_sgl_for_cpu = xilly_dma_sync_single_for_cpu_of,
- .hw_sync_sgl_for_device = xilly_dma_sync_single_for_device_of,
- .map_single = xilly_map_single_of,
-};
-
-static struct xilly_endpoint_hardware of_hw_coherent = {
- .owner = THIS_MODULE,
- .hw_sync_sgl_for_cpu = xilly_dma_sync_single_nop,
- .hw_sync_sgl_for_device = xilly_dma_sync_single_nop,
- .map_single = xilly_map_single_of,
-};
-
static int xilly_drv_probe(struct platform_device *op)
{
struct device *dev = &op->dev;
struct xilly_endpoint *endpoint;
int rc;
int irq;
- struct xilly_endpoint_hardware *ephw = &of_hw;
- if (of_property_read_bool(dev->of_node, "dma-coherent"))
- ephw = &of_hw_coherent;
-
- endpoint = xillybus_init_endpoint(dev, ephw);
+ endpoint = xillybus_init_endpoint(dev);
if (!endpoint)
return -ENOMEM;
dev_set_drvdata(dev, endpoint);
+ endpoint->owner = THIS_MODULE;
+
endpoint->registers = devm_platform_ioremap_resource(op, 0);
if (IS_ERR(endpoint->registers))
return PTR_ERR(endpoint->registers);
diff --git a/drivers/char/xillybus/xillybus_pcie.c b/drivers/char/xillybus/xillybus_pcie.c
index a6ef4ce90649..9858711e3e79 100644
--- a/drivers/char/xillybus/xillybus_pcie.c
+++ b/drivers/char/xillybus/xillybus_pcie.c
@@ -32,105 +32,21 @@ static const struct pci_device_id xillyids[] = {
{ /* End: all zeroes */ }
};
-static int xilly_pci_direction(int direction)
-{
- switch (direction) {
- case DMA_TO_DEVICE:
- case DMA_FROM_DEVICE:
- return direction;
- default:
- return DMA_BIDIRECTIONAL;
- }
-}
-
-static void xilly_dma_sync_single_for_cpu_pci(struct xilly_endpoint *ep,
- dma_addr_t dma_handle,
- size_t size,
- int direction)
-{
- dma_sync_single_for_cpu(ep->dev, dma_handle, size,
- xilly_pci_direction(direction));
-}
-
-static void xilly_dma_sync_single_for_device_pci(struct xilly_endpoint *ep,
- dma_addr_t dma_handle,
- size_t size,
- int direction)
-{
- dma_sync_single_for_device(ep->dev, dma_handle, size,
- xilly_pci_direction(direction));
-}
-
-static void xilly_pci_unmap(void *ptr)
-{
- struct xilly_mapping *data = ptr;
-
- dma_unmap_single(data->device, data->dma_addr, data->size,
- data->direction);
-
- kfree(ptr);
-}
-
-/*
- * Map either through the PCI DMA mapper or the non_PCI one. Behind the
- * scenes exactly the same functions are called with the same parameters,
- * but that can change.
- */
-
-static int xilly_map_single_pci(struct xilly_endpoint *ep,
- void *ptr,
- size_t size,
- int direction,
- dma_addr_t *ret_dma_handle
- )
-{
- int pci_direction;
- dma_addr_t addr;
- struct xilly_mapping *this;
-
- this = kzalloc(sizeof(*this), GFP_KERNEL);
- if (!this)
- return -ENOMEM;
-
- pci_direction = xilly_pci_direction(direction);
-
- addr = dma_map_single(ep->dev, ptr, size, pci_direction);
-
- if (dma_mapping_error(ep->dev, addr)) {
- kfree(this);
- return -ENODEV;
- }
-
- this->device = ep->dev;
- this->dma_addr = addr;
- this->size = size;
- this->direction = pci_direction;
-
- *ret_dma_handle = addr;
-
- return devm_add_action_or_reset(ep->dev, xilly_pci_unmap, this);
-}
-
-static struct xilly_endpoint_hardware pci_hw = {
- .owner = THIS_MODULE,
- .hw_sync_sgl_for_cpu = xilly_dma_sync_single_for_cpu_pci,
- .hw_sync_sgl_for_device = xilly_dma_sync_single_for_device_pci,
- .map_single = xilly_map_single_pci,
-};
-
static int xilly_probe(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
struct xilly_endpoint *endpoint;
int rc;
- endpoint = xillybus_init_endpoint(&pdev->dev, &pci_hw);
+ endpoint = xillybus_init_endpoint(&pdev->dev);
if (!endpoint)
return -ENOMEM;
pci_set_drvdata(pdev, endpoint);
+ endpoint->owner = THIS_MODULE;
+
rc = pcim_enable_device(pdev);
if (rc) {
dev_err(endpoint->dev,
--
2.17.1
On Wed, Sep 29, 2021 at 11:44 AM <[email protected]> wrote:
>
> From: Eli Billauer <[email protected]>
>
> The driver was originally written with the assumption that a different
> API must be used for DMA-related functions if the device is PCIe based
> or if not. Since Xillybus' driver supports devices on a PCIe bus (with
> xillybus_pcie) as well as connected directly to the processor (with
> xillybus_of), it originally used wrapper functions that ensure that
> a different API is used for each.
>
> This patch eliminates the said wrapper functions, as all use the same
> dma_* API now. This is most notable by the code deleted in xillybus_pcie.c
> and xillybus_of.c.
>
> It also eliminates the OF driver's check for a "dma-coherent" attribute
> in the device's OF entry, since this is taken care of by the kernel's
> implementation of dma_sync_single_for_*().
>
> There is however still need for one wrapper function, which is merged
> from xillybus_pcie.c and xillybus_of.c into xillybus_core.c: The call to
> dma_map_single() is wrapped by a function that uses the Managed Device
> (devres) framework, in the absence of a relevant function in the current
> kernel's API.
>
> Suggested-by: Christophe JAILLET <[email protected]>
> Suggested-by: Arnd Bergmann <[email protected]>
> Signed-off-by: Eli Billauer <[email protected]>
Reviewed-by: Arnd Bergmann <[email protected]>