ASUS Pro WS X570-ACE also supports accessing sensor information from the
embedded controller via BREC WMI method. Hence, add it to the list.
Note `T_Sensor` is not supported by this board.
Tested by me on this hardware:
```
Base Board Information
Manufacturer: ASUSTeK COMPUTER INC.
Product Name: Pro WS X570-ACE
BIOS Information
Vendor: American Megatrends Inc.
Version: 3801
Release Date: 07/30/2021
```
Signed-off-by: Oleksandr Natalenko <[email protected]>
---
drivers/hwmon/asus_wmi_sensors.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/hwmon/asus_wmi_sensors.c b/drivers/hwmon/asus_wmi_sensors.c
index 98e761861601..319c879624b2 100644
--- a/drivers/hwmon/asus_wmi_sensors.c
+++ b/drivers/hwmon/asus_wmi_sensors.c
@@ -35,6 +35,7 @@
#define ASUS_EC_KNOWN_EC_REGISTERS 14
enum asus_wmi_ec_board {
+ BOARD_PW_X570_A, // Pro WS X570-ACE
BOARD_R_C8H, // ROG Crosshair VIII Hero
BOARD_R_C8DH, // ROG Crosshair VIII Dark Hero
BOARD_R_C8F, // ROG Crosshair VIII Formula
@@ -44,6 +45,7 @@ enum asus_wmi_ec_board {
/* boards with EC support */
static const char *const asus_wmi_ec_boards_names[] = {
+ [BOARD_PW_X570_A] = "Pro WS X570-ACE",
[BOARD_R_C8H] = "ROG CROSSHAIR VIII HERO",
[BOARD_R_C8DH] = "ROG CROSSHAIR VIII DARK HERO",
[BOARD_R_C8F] = "ROG CROSSHAIR VIII FORMULA",
@@ -130,6 +132,7 @@ static void asus_wmi_ec_fill_board_sensors(struct asus_wmi_ec_info *ec, int boar
ec->nr_registers = 0;
switch (board) {
+ case BOARD_PW_X570_A:
case BOARD_RS_B550_E_G:
case BOARD_RS_X570_E_G:
case BOARD_R_C8H:
@@ -161,6 +164,7 @@ static void asus_wmi_ec_fill_board_sensors(struct asus_wmi_ec_info *ec, int boar
}
switch (board) {
+ case BOARD_PW_X570_A:
case BOARD_RS_X570_E_G:
case BOARD_R_C8H:
case BOARD_R_C8DH:
@@ -174,6 +178,7 @@ static void asus_wmi_ec_fill_board_sensors(struct asus_wmi_ec_info *ec, int boar
}
switch (board) {
+ case BOARD_PW_X570_A:
case BOARD_RS_X570_E_G:
case BOARD_R_C8H:
case BOARD_R_C8F:
--
2.33.0