When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
Using dev_err_probe() can reduce code size, and the error value
gets printed.
Signed-off-by: Cai Huoqing <[email protected]>
---
v1->v2: Remove the separate line of PTR_ERR().
v2 is applied to the togreg branch of iio.git
drivers/iio/light/noa1305.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/drivers/iio/light/noa1305.c b/drivers/iio/light/noa1305.c
index a308fbc2fc7b..ee81fe083e4c 100644
--- a/drivers/iio/light/noa1305.c
+++ b/drivers/iio/light/noa1305.c
@@ -217,10 +217,9 @@ static int noa1305_probe(struct i2c_client *client,
priv = iio_priv(indio_dev);
priv->vin_reg = devm_regulator_get(&client->dev, "vin");
- if (IS_ERR(priv->vin_reg)) {
- dev_err(&client->dev, "get regulator vin failed\n");
- return PTR_ERR(priv->vin_reg);
- }
+ if (IS_ERR(priv->vin_reg))
+ return dev_err_probe(&client->dev, PTR_ERR(priv->vin_reg),
+ "get regulator vin failed\n");
ret = regulator_enable(priv->vin_reg);
if (ret) {
--
2.25.1