From: Alexandru Tachici <[email protected]>
DT bindings for the ADIN1100 10BASE-T1L Ethernet PHY.
Signed-off-by: Alexandru Tachici <[email protected]>
---
.../devicetree/bindings/net/adi,adin1100.yaml | 30 +++++++++++++++++++
1 file changed, 30 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/adi,adin1100.yaml
diff --git a/Documentation/devicetree/bindings/net/adi,adin1100.yaml b/Documentation/devicetree/bindings/net/adi,adin1100.yaml
new file mode 100644
index 000000000000..7f98ea8fdf51
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/adi,adin1100.yaml
@@ -0,0 +1,30 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/adi,adin1100.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADIN1100 PHY
+
+maintainers:
+ - Alexandru Tachici <[email protected]>
+
+description:
+ Bindings for Analog Devices Industrial Low Power 10BASE-T1L Ethernet PHY
+
+allOf:
+ - $ref: ethernet-phy.yaml#
+
+examples:
+ - |
+ ethernet {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ 10base-t1l-2.4vpp = <0>;
+
+ ethernet-phy@0 {
+ compatible = "ethernet-phy-id0283.bc81";
+ reg = <0>;
+ };
+ };
--
2.25.1
On Mon, 11 Oct 2021 17:22:15 +0300, [email protected] wrote:
> From: Alexandru Tachici <[email protected]>
>
> DT bindings for the ADIN1100 10BASE-T1L Ethernet PHY.
>
> Signed-off-by: Alexandru Tachici <[email protected]>
> ---
> .../devicetree/bindings/net/adi,adin1100.yaml | 30 +++++++++++++++++++
> 1 file changed, 30 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/net/adi,adin1100.yaml
>
My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):
yamllint warnings/errors:
dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/net/adi,adin1100.yaml: 'oneOf' conditional failed, one must be fixed:
'unevaluatedProperties' is a required property
'additionalProperties' is a required property
hint: A schema with a "$ref" to another schema either can define all properties used and use "additionalProperties" or can use "unevaluatedProperties"
from schema $id: http://devicetree.org/meta-schemas/base.yaml#
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/net/adi,adin1100.yaml: 'anyOf' conditional failed, one must be fixed:
'properties' is a required property
'patternProperties' is a required property
hint: Metaschema for devicetree binding documentation
from schema $id: http://devicetree.org/meta-schemas/core.yaml#
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/net/adi,adin1100.yaml: ignoring, error in schema:
warning: no schema found in file: ./Documentation/devicetree/bindings/net/adi,adin1100.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/net/adi,adin1100.example.dt.yaml: ethernet: '10base-t1l-2.4vpp' does not match any of the regexes: '.*-names$', '.*-supply$', '^#.*-cells$', '^#[a-zA-Z0-9,+\\-._]{0,63}$', '^[a-zA-Z][a-zA-Z0-9,+\\-._]{0,63}$', '^[a-zA-Z][a-zA-Z0-9,+\\-._]{0,63}@[0-9a-fA-F]+(,[0-9a-fA-F]+)*$', '^__.*__$', 'pinctrl-[0-9]+'
From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/dt-core.yaml
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/patch/1539350
This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit.
On Mon, Oct 11, 2021 at 05:22:15PM +0300, [email protected] wrote:
> From: Alexandru Tachici <[email protected]>
>
> DT bindings for the ADIN1100 10BASE-T1L Ethernet PHY.
>
> Signed-off-by: Alexandru Tachici <[email protected]>
> ---
> .../devicetree/bindings/net/adi,adin1100.yaml | 30 +++++++++++++++++++
> 1 file changed, 30 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/net/adi,adin1100.yaml
>
> diff --git a/Documentation/devicetree/bindings/net/adi,adin1100.yaml b/Documentation/devicetree/bindings/net/adi,adin1100.yaml
> new file mode 100644
> index 000000000000..7f98ea8fdf51
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/adi,adin1100.yaml
> @@ -0,0 +1,30 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/adi,adin1100.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Analog Devices ADIN1100 PHY
> +
> +maintainers:
> + - Alexandru Tachici <[email protected]>
> +
> +description:
> + Bindings for Analog Devices Industrial Low Power 10BASE-T1L Ethernet PHY
This schema doesn't do anything. ethernet-phy.yaml is already applied
based on the node name and you haven't added any phy specific
properties.
> +
> +allOf:
> + - $ref: ethernet-phy.yaml#
> +
> +examples:
> + - |
> + ethernet {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + 10base-t1l-2.4vpp = <0>;
> +
> + ethernet-phy@0 {
> + compatible = "ethernet-phy-id0283.bc81";
> + reg = <0>;
> + };
> + };
> --
> 2.25.1
>
>