2021-10-20 23:19:00

by David Heidelberg

[permalink] [raw]
Subject: [PATCH] dt-bindings: mfd: qcom: pm8xxx: add pm8018 compatible

Add missing compatible for the PM8018 model.

Signed-off-by: David Heidelberg <[email protected]>
---
Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml | 1 +
1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml b/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml
index 9065ec53e643..2568736701be 100644
--- a/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml
+++ b/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml
@@ -16,6 +16,7 @@ description: |
properties:
compatible:
enum:
+ - qcom,pm8018
- qcom,pm8058
- qcom,pm8821
- qcom,pm8921
--
2.33.0


2021-10-21 12:15:34

by Lee Jones

[permalink] [raw]
Subject: Re: [PATCH] dt-bindings: mfd: qcom: pm8xxx: add pm8018 compatible

On Thu, 21 Oct 2021, David Heidelberg wrote:

> Add missing compatible for the PM8018 model.
>
> Signed-off-by: David Heidelberg <[email protected]>
> ---
> Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml | 1 +
> 1 file changed, 1 insertion(+)

Applied, thanks.

--
Lee Jones [李琼斯]
Senior Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog

2021-10-21 13:32:59

by Rob Herring (Arm)

[permalink] [raw]
Subject: Re: [PATCH] dt-bindings: mfd: qcom: pm8xxx: add pm8018 compatible

On Thu, 21 Oct 2021 01:16:45 +0200, David Heidelberg wrote:
> Add missing compatible for the PM8018 model.
>
> Signed-off-by: David Heidelberg <[email protected]>
> ---
> Documentation/devicetree/bindings/mfd/qcom-pm8xxx.yaml | 1 +
> 1 file changed, 1 insertion(+)
>

Running 'make dtbs_check' with the schema in this patch gives the
following warnings. Consider if they are expected or the schema is
incorrect. These may not be new warnings.

Note that it is not yet a requirement to have 0 warnings for dtbs_check.
This will change in the future.

Full log is available here: https://patchwork.ozlabs.org/patch/1544064


pmic@0: compatible: Additional items are not allowed ('qcom,pm8921' was unexpected)
arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dt.yaml

pmic@0: compatible: ['qcom,pm8018', 'qcom,pm8921'] is too long
arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dt.yaml

pmic@0: 'gpio@150', 'keypad@148', 'led@131', 'led@132', 'led@133', 'led@48', 'mpps@50', 'pwrkey@1c', 'vibrator@4a', 'xoadc@197' do not match any of the regexes: 'pinctrl-[0-9]+', 'rtc@[0-9a-f]+$'
arch/arm/boot/dts/qcom-apq8060-dragonboard.dt.yaml

pmic@0: 'gpio@150', 'keypad@148', 'mpps@50', 'pwrkey@1c', 'vibrator@4a', 'xoadc@197' do not match any of the regexes: 'pinctrl-[0-9]+', 'rtc@[0-9a-f]+$'
arch/arm/boot/dts/qcom-msm8660-surf.dt.yaml

pmic@0: 'gpio@150', 'mpp@50', 'pwrkey@1c' do not match any of the regexes: 'pinctrl-[0-9]+', 'rtc@[0-9a-f]+$'
arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dt.yaml

pmic@0: 'gpio@150', 'mpps@50', 'pwrkey@1c', 'xoadc@197' do not match any of the regexes: 'pinctrl-[0-9]+', 'rtc@[0-9a-f]+$'
arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dt.yaml
arch/arm/boot/dts/qcom-apq8064-cm-qs600.dt.yaml
arch/arm/boot/dts/qcom-apq8064-ifc6410.dt.yaml
arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dt.yaml

pmic@0: 'keypad@148', 'pwrkey@1c' do not match any of the regexes: 'pinctrl-[0-9]+', 'rtc@[0-9a-f]+$'
arch/arm/boot/dts/qcom-msm8960-cdp.dt.yaml

pmic@0: rtc@11d:compatible: Additional items are not allowed ('qcom,pm8921-rtc' was unexpected)
arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dt.yaml

pmic@0: rtc@11d:compatible: ['qcom,pm8018-rtc', 'qcom,pm8921-rtc'] is too long
arch/arm/boot/dts/qcom-mdm9615-wp8548-mangoh-green.dt.yaml

pmic@1: 'mpps@50' does not match any of the regexes: 'pinctrl-[0-9]+', 'rtc@[0-9a-f]+$'
arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dt.yaml
arch/arm/boot/dts/qcom-apq8064-cm-qs600.dt.yaml
arch/arm/boot/dts/qcom-apq8064-ifc6410.dt.yaml
arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dt.yaml