From: Quentin Perret <[email protected]>
[ Upstream commit 7615c2a514788559c6684234b8fc27f3a843c2c6 ]
Some of the refcount manipulation helpers used at EL2 are instrumented
to catch a corrupted state, but not all of them are treated equally. Let's
make things more consistent by instrumenting hyp_page_ref_dec_and_test()
as well.
Acked-by: Will Deacon <[email protected]>
Suggested-by: Will Deacon <[email protected]>
Signed-off-by: Quentin Perret <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/kvm/hyp/nvhe/page_alloc.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/kvm/hyp/nvhe/page_alloc.c b/arch/arm64/kvm/hyp/nvhe/page_alloc.c
index 41fc25bdfb34..da2d3c0bfb7f 100644
--- a/arch/arm64/kvm/hyp/nvhe/page_alloc.c
+++ b/arch/arm64/kvm/hyp/nvhe/page_alloc.c
@@ -152,6 +152,7 @@ static inline void hyp_page_ref_inc(struct hyp_page *p)
static inline int hyp_page_ref_dec_and_test(struct hyp_page *p)
{
+ BUG_ON(!p->refcount);
p->refcount--;
return (p->refcount == 0);
}
--
2.33.0
From: Stefan Binding <[email protected]>
[ Upstream commit aa18457c4af7a9dad1f2b150b11beae1d8ab57aa ]
Ensure the default 0dB playback path is always used.
The code that set FULL_SCALE_VOL based on LOAD_DET_RCSTAT was
spurious, and resulted in a -6dB attenuation being accidentally
inserted into the playback path.
Signed-off-by: Stefan Binding <[email protected]>
Signed-off-by: Richard Fitzgerald <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/codecs/cs42l42.c | 16 +++-------------
1 file changed, 3 insertions(+), 13 deletions(-)
diff --git a/sound/soc/codecs/cs42l42.c b/sound/soc/codecs/cs42l42.c
index 99c022be94a6..8838b9a0de8e 100644
--- a/sound/soc/codecs/cs42l42.c
+++ b/sound/soc/codecs/cs42l42.c
@@ -901,7 +901,6 @@ static int cs42l42_mute_stream(struct snd_soc_dai *dai, int mute, int stream)
struct snd_soc_component *component = dai->component;
struct cs42l42_private *cs42l42 = snd_soc_component_get_drvdata(component);
unsigned int regval;
- u8 fullScaleVol;
int ret;
if (mute) {
@@ -972,20 +971,11 @@ static int cs42l42_mute_stream(struct snd_soc_dai *dai, int mute, int stream)
cs42l42->stream_use |= 1 << stream;
if (stream == SNDRV_PCM_STREAM_PLAYBACK) {
- /* Read the headphone load */
- regval = snd_soc_component_read(component, CS42L42_LOAD_DET_RCSTAT);
- if (((regval & CS42L42_RLA_STAT_MASK) >> CS42L42_RLA_STAT_SHIFT) ==
- CS42L42_RLA_STAT_15_OHM) {
- fullScaleVol = CS42L42_HP_FULL_SCALE_VOL_MASK;
- } else {
- fullScaleVol = 0;
- }
-
- /* Un-mute the headphone, set the full scale volume flag */
+ /* Un-mute the headphone */
snd_soc_component_update_bits(component, CS42L42_HP_CTL,
CS42L42_HP_ANA_AMUTE_MASK |
- CS42L42_HP_ANA_BMUTE_MASK |
- CS42L42_HP_FULL_SCALE_VOL_MASK, fullScaleVol);
+ CS42L42_HP_ANA_BMUTE_MASK,
+ 0);
}
}
--
2.33.0
From: Ming Lei <[email protected]>
[ Upstream commit f2b85040acec9a928b4eb1b57a989324e8e38d3f ]
SCSI host release is triggered when SCSI device is freed. We have to make
sure that the low-level device driver module won't be unloaded before SCSI
host instance is released because shost->hostt is required in the release
handler.
Make sure to put LLD module refcnt after SCSI device is released.
Fixes a kernel panic of 'BUG: unable to handle page fault for address'
reported by Changhui and Yi.
Link: https://lore.kernel.org/r/[email protected]
Cc: Greg Kroah-Hartman <[email protected]>
Reported-by: Changhui Zhong <[email protected]>
Reported-by: Yi Zhang <[email protected]>
Tested-by: Yi Zhang <[email protected]>
Signed-off-by: Ming Lei <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/scsi.c | 4 +++-
drivers/scsi/scsi_sysfs.c | 9 +++++++++
2 files changed, 12 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c
index d26025cf5de3..71dd0989c78a 100644
--- a/drivers/scsi/scsi.c
+++ b/drivers/scsi/scsi.c
@@ -553,8 +553,10 @@ EXPORT_SYMBOL(scsi_device_get);
*/
void scsi_device_put(struct scsi_device *sdev)
{
- module_put(sdev->host->hostt->module);
+ struct module *mod = sdev->host->hostt->module;
+
put_device(&sdev->sdev_gendev);
+ module_put(mod);
}
EXPORT_SYMBOL(scsi_device_put);
diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
index c0d31119d6d7..ed05c3565e83 100644
--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -448,9 +448,12 @@ static void scsi_device_dev_release_usercontext(struct work_struct *work)
struct scsi_vpd *vpd_pg80 = NULL, *vpd_pg83 = NULL;
struct scsi_vpd *vpd_pg0 = NULL, *vpd_pg89 = NULL;
unsigned long flags;
+ struct module *mod;
sdev = container_of(work, struct scsi_device, ew.work);
+ mod = sdev->host->hostt->module;
+
scsi_dh_release_device(sdev);
parent = sdev->sdev_gendev.parent;
@@ -501,11 +504,17 @@ static void scsi_device_dev_release_usercontext(struct work_struct *work)
if (parent)
put_device(parent);
+ module_put(mod);
}
static void scsi_device_dev_release(struct device *dev)
{
struct scsi_device *sdp = to_scsi_device(dev);
+
+ /* Set module pointer as NULL in case of module unloading */
+ if (!try_module_get(sdp->host->hostt->module))
+ sdp->host->hostt->module = NULL;
+
execute_in_process_context(scsi_device_dev_release_usercontext,
&sdp->ew);
}
--
2.33.0
From: Wan Jiabing <[email protected]>
[ Upstream commit d1a7b9e4696584ce05c12567762c18a866837a85 ]
Fix following coccicheck warning:
./drivers/net/ethernet/mscc/ocelot_vsc7514.c:946:1-33: WARNING: Function
for_each_available_child_of_node should have of_node_put() before goto.
Early exits from for_each_available_child_of_node should decrement the
node reference counter.
Signed-off-by: Wan Jiabing <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/mscc/ocelot_vsc7514.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/ethernet/mscc/ocelot_vsc7514.c b/drivers/net/ethernet/mscc/ocelot_vsc7514.c
index 4bd7e9d9ec61..03cfa0dc7bf9 100644
--- a/drivers/net/ethernet/mscc/ocelot_vsc7514.c
+++ b/drivers/net/ethernet/mscc/ocelot_vsc7514.c
@@ -972,6 +972,7 @@ static int mscc_ocelot_init_ports(struct platform_device *pdev,
target = ocelot_regmap_init(ocelot, res);
if (IS_ERR(target)) {
err = PTR_ERR(target);
+ of_node_put(portnp);
goto out_teardown;
}
--
2.33.0
From: Davide Baldo <[email protected]>
[ Upstream commit d94befbb5ae379f6dfd4fa6d460eacc09fa7b9c3 ]
In laptop 'HP Spectre x360 Convertible 15-eb1xxx/8811' both front and
rear speakers are silent, this patch fixes that by overriding the pin
layout and by initializing the amplifier which needs a GPIO pin to be
set to 1 then 0, similar to the existing HP Spectre x360 14 model.
In order to have volume control, both front and rear speakers were
forced to use the DAC1.
This patch also correctly map the mute LED but since there is no
microphone on/off switch exposed by the alsa subsystem it never turns
on by itself.
There are still known audio issues in this laptop: headset microphone
doesn't work, the button to mute/unmute microphone is not yet mapped,
the LED of the mute/unmute speakers doesn't seems to be exposed via
GPIO and never turns on.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=213953
Signed-off-by: Davide Baldo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/pci/hda/patch_realtek.c | 46 +++++++++++++++++++++++++++++++++++
1 file changed, 46 insertions(+)
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 8e6ff50f0f94..a628b2c050bd 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -6418,6 +6418,44 @@ static void alc_fixup_no_int_mic(struct hda_codec *codec,
}
}
+/* GPIO1 = amplifier on/off
+ * GPIO3 = mic mute LED
+ */
+static void alc285_fixup_hp_spectre_x360_eb1(struct hda_codec *codec,
+ const struct hda_fixup *fix, int action)
+{
+ static const hda_nid_t conn[] = { 0x02 };
+
+ struct alc_spec *spec = codec->spec;
+ static const struct hda_pintbl pincfgs[] = {
+ { 0x14, 0x90170110 }, /* front/high speakers */
+ { 0x17, 0x90170130 }, /* back/bass speakers */
+ { }
+ };
+
+ //enable micmute led
+ alc_fixup_hp_gpio_led(codec, action, 0x00, 0x04);
+
+ switch (action) {
+ case HDA_FIXUP_ACT_PRE_PROBE:
+ spec->micmute_led_polarity = 1;
+ /* needed for amp of back speakers */
+ spec->gpio_mask |= 0x01;
+ spec->gpio_dir |= 0x01;
+ snd_hda_apply_pincfgs(codec, pincfgs);
+ /* share DAC to have unified volume control */
+ snd_hda_override_conn_list(codec, 0x14, ARRAY_SIZE(conn), conn);
+ snd_hda_override_conn_list(codec, 0x17, ARRAY_SIZE(conn), conn);
+ break;
+ case HDA_FIXUP_ACT_INIT:
+ /* need to toggle GPIO to enable the amp of back speakers */
+ alc_update_gpio_data(codec, 0x01, true);
+ msleep(100);
+ alc_update_gpio_data(codec, 0x01, false);
+ break;
+ }
+}
+
static void alc285_fixup_hp_spectre_x360(struct hda_codec *codec,
const struct hda_fixup *fix, int action)
{
@@ -6570,6 +6608,7 @@ enum {
ALC269_FIXUP_HP_DOCK_GPIO_MIC1_LED,
ALC280_FIXUP_HP_9480M,
ALC245_FIXUP_HP_X360_AMP,
+ ALC285_FIXUP_HP_SPECTRE_X360_EB1,
ALC288_FIXUP_DELL_HEADSET_MODE,
ALC288_FIXUP_DELL1_MIC_NO_PRESENCE,
ALC288_FIXUP_DELL_XPS_13,
@@ -8263,6 +8302,10 @@ static const struct hda_fixup alc269_fixups[] = {
.type = HDA_FIXUP_FUNC,
.v.func = alc285_fixup_hp_spectre_x360,
},
+ [ALC285_FIXUP_HP_SPECTRE_X360_EB1] = {
+ .type = HDA_FIXUP_FUNC,
+ .v.func = alc285_fixup_hp_spectre_x360_eb1
+ },
[ALC287_FIXUP_IDEAPAD_BASS_SPK_AMP] = {
.type = HDA_FIXUP_FUNC,
.v.func = alc285_fixup_ideapad_s740_coef,
@@ -8597,6 +8640,8 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = {
SND_PCI_QUIRK(0x103c, 0x87f7, "HP Spectre x360 14", ALC245_FIXUP_HP_X360_AMP),
SND_PCI_QUIRK(0x103c, 0x8805, "HP ProBook 650 G8 Notebook PC", ALC236_FIXUP_HP_GPIO_LED),
SND_PCI_QUIRK(0x103c, 0x880d, "HP EliteBook 830 G8 Notebook PC", ALC285_FIXUP_HP_GPIO_LED),
+ SND_PCI_QUIRK(0x103c, 0x8811, "HP Spectre x360 15-eb1xxx", ALC285_FIXUP_HP_SPECTRE_X360_EB1),
+ SND_PCI_QUIRK(0x103c, 0x8812, "HP Spectre x360 15-eb1xxx", ALC285_FIXUP_HP_SPECTRE_X360_EB1),
SND_PCI_QUIRK(0x103c, 0x8846, "HP EliteBook 850 G8 Notebook PC", ALC285_FIXUP_HP_GPIO_LED),
SND_PCI_QUIRK(0x103c, 0x8847, "HP EliteBook x360 830 G8 Notebook PC", ALC285_FIXUP_HP_GPIO_LED),
SND_PCI_QUIRK(0x103c, 0x884b, "HP EliteBook 840 Aero G8 Notebook PC", ALC285_FIXUP_HP_GPIO_LED),
@@ -9018,6 +9063,7 @@ static const struct hda_model_fixup alc269_fixup_models[] = {
{.id = ALC245_FIXUP_HP_X360_AMP, .name = "alc245-hp-x360-amp"},
{.id = ALC295_FIXUP_HP_OMEN, .name = "alc295-hp-omen"},
{.id = ALC285_FIXUP_HP_SPECTRE_X360, .name = "alc285-hp-spectre-x360"},
+ {.id = ALC285_FIXUP_HP_SPECTRE_X360_EB1, .name = "alc285-hp-spectre-x360-eb1"},
{.id = ALC287_FIXUP_IDEAPAD_BASS_SPK_AMP, .name = "alc287-ideapad-bass-spk-amp"},
{.id = ALC623_FIXUP_LENOVO_THINKSTATION_P340, .name = "alc623-lenovo-thinkstation-p340"},
{.id = ALC255_FIXUP_ACER_HEADPHONE_AND_MIC, .name = "alc255-acer-headphone-and-mic"},
--
2.33.0
From: Kele Huang <[email protected]>
[ Upstream commit c2402d43d183b11445aed921e7bebcd47ef222f1 ]
Commit a86ed2cfa13c5 ("ptp: Don't print an error if ptp_kvm is not supported")
fixes the error message print on ARM platform by only concerning about
the case that the error returned from kvm_arch_ptp_init() is not -EOPNOTSUPP.
Although the ARM platform returns -EOPNOTSUPP if ptp_kvm is not supported
while X86_64 platform returns -KVM_EOPNOTSUPP, both error codes share the
same value 95.
Actually kvm_arch_ptp_init() on X86_64 platform can return three kinds of
errors (-KVM_ENOSYS, -KVM_EOPNOTSUPP and -KVM_EFAULT). The problem is that
-KVM_EOPNOTSUPP is masked out and -KVM_EFAULT is ignored among them.
This patch fixes this by returning them to ptp_kvm_init() respectively.
Signed-off-by: Kele Huang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/ptp/ptp_kvm_x86.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/ptp/ptp_kvm_x86.c b/drivers/ptp/ptp_kvm_x86.c
index d0096cd7096a..4991054a2135 100644
--- a/drivers/ptp/ptp_kvm_x86.c
+++ b/drivers/ptp/ptp_kvm_x86.c
@@ -31,10 +31,10 @@ int kvm_arch_ptp_init(void)
ret = kvm_hypercall2(KVM_HC_CLOCK_PAIRING, clock_pair_gpa,
KVM_CLOCK_PAIRING_WALLCLOCK);
- if (ret == -KVM_ENOSYS || ret == -KVM_EOPNOTSUPP)
+ if (ret == -KVM_ENOSYS)
return -ENODEV;
- return 0;
+ return ret;
}
int kvm_arch_ptp_get_clock(struct timespec64 *ts)
--
2.33.0
From: Oliver Neukum <[email protected]>
[ Upstream commit 397430b50a363d8b7bdda00522123f82df6adc5e ]
maxpacket of 0 makes no sense and oopses as we need to divide
by it. Give up.
V2: fixed typo in log and stylistic issues
Signed-off-by: Oliver Neukum <[email protected]>
Reported-by: [email protected]
Reviewed-by: Johan Hovold <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/usb/usbnet.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c
index 470e1c1e6353..54d78d2a6b5d 100644
--- a/drivers/net/usb/usbnet.c
+++ b/drivers/net/usb/usbnet.c
@@ -1788,6 +1788,10 @@ usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod)
if (!dev->rx_urb_size)
dev->rx_urb_size = dev->hard_mtu;
dev->maxpacket = usb_maxpacket (dev->udev, dev->out, 1);
+ if (dev->maxpacket == 0) {
+ /* that is a broken device */
+ goto out4;
+ }
/* let userspace know we have a random address */
if (ether_addr_equal(net->dev_addr, node_id))
--
2.33.0
From: Wan Jiabing <[email protected]>
[ Upstream commit d9fd7e9fccfac466fb528a783f2fc76f2982604c ]
Fix following coccicheck warning:
./drivers/net/ethernet/microchip/sparx5/s4parx5_main.c:723:1-33: WARNING: Function
for_each_available_child_of_node should have of_node_put() before goto
Early exits from for_each_available_child_of_node should decrement the
node reference counter.
Signed-off-by: Wan Jiabing <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/microchip/sparx5/sparx5_main.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/ethernet/microchip/sparx5/sparx5_main.c b/drivers/net/ethernet/microchip/sparx5/sparx5_main.c
index f666133a15de..6e9058265d43 100644
--- a/drivers/net/ethernet/microchip/sparx5/sparx5_main.c
+++ b/drivers/net/ethernet/microchip/sparx5/sparx5_main.c
@@ -743,6 +743,7 @@ static int mchp_sparx5_probe(struct platform_device *pdev)
err = dev_err_probe(sparx5->dev, PTR_ERR(serdes),
"port %u: missing serdes\n",
portno);
+ of_node_put(portnp);
goto cleanup_config;
}
config->portno = portno;
--
2.33.0
From: Dmitry Bogdanov <[email protected]>
[ Upstream commit 4a8f71014b4d56c4fb287607e844c0a9f68f46d9 ]
The sgl is freed in the target stack in target_release_cmd_kref() before
calling qlt_free_cmd() but there is an unmap of sgl in qlt_free_cmd() that
causes a panic if sgl is not yet DMA unmapped:
NIP dma_direct_unmap_sg+0xdc/0x180
LR dma_direct_unmap_sg+0xc8/0x180
Call Trace:
ql_dbg_prefix+0x68/0xc0 [qla2xxx] (unreliable)
dma_unmap_sg_attrs+0x54/0xf0
qlt_unmap_sg.part.19+0x54/0x1c0 [qla2xxx]
qlt_free_cmd+0x124/0x1d0 [qla2xxx]
tcm_qla2xxx_release_cmd+0x4c/0xa0 [tcm_qla2xxx]
target_put_sess_cmd+0x198/0x370 [target_core_mod]
transport_generic_free_cmd+0x6c/0x1b0 [target_core_mod]
tcm_qla2xxx_complete_free+0x6c/0x90 [tcm_qla2xxx]
The sgl may be left unmapped in error cases of response sending. For
instance, qlt_rdy_to_xfer() maps sgl and exits when session is being
deleted keeping the sgl mapped.
This patch removes use-after-free of the sgl and ensures that the sgl is
unmapped for any command that was not sent to firmware.
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Himanshu Madhani <[email protected]>
Signed-off-by: Dmitry Bogdanov <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/qla2xxx/qla_target.c | 14 +++++---------
1 file changed, 5 insertions(+), 9 deletions(-)
diff --git a/drivers/scsi/qla2xxx/qla_target.c b/drivers/scsi/qla2xxx/qla_target.c
index eb47140a899f..41219f4f1e11 100644
--- a/drivers/scsi/qla2xxx/qla_target.c
+++ b/drivers/scsi/qla2xxx/qla_target.c
@@ -3261,8 +3261,7 @@ int qlt_xmit_response(struct qla_tgt_cmd *cmd, int xmit_type,
"RESET-RSP online/active/old-count/new-count = %d/%d/%d/%d.\n",
vha->flags.online, qla2x00_reset_active(vha),
cmd->reset_count, qpair->chip_reset);
- spin_unlock_irqrestore(qpair->qp_lock_ptr, flags);
- return 0;
+ goto out_unmap_unlock;
}
/* Does F/W have an IOCBs for this request */
@@ -3385,10 +3384,6 @@ int qlt_rdy_to_xfer(struct qla_tgt_cmd *cmd)
prm.sg = NULL;
prm.req_cnt = 1;
- /* Calculate number of entries and segments required */
- if (qlt_pci_map_calc_cnt(&prm) != 0)
- return -EAGAIN;
-
if (!qpair->fw_started || (cmd->reset_count != qpair->chip_reset) ||
(cmd->sess && cmd->sess->deleted)) {
/*
@@ -3406,6 +3401,10 @@ int qlt_rdy_to_xfer(struct qla_tgt_cmd *cmd)
return 0;
}
+ /* Calculate number of entries and segments required */
+ if (qlt_pci_map_calc_cnt(&prm) != 0)
+ return -EAGAIN;
+
spin_lock_irqsave(qpair->qp_lock_ptr, flags);
/* Does F/W have an IOCBs for this request */
res = qlt_check_reserve_free_req(qpair, prm.req_cnt);
@@ -3810,9 +3809,6 @@ void qlt_free_cmd(struct qla_tgt_cmd *cmd)
BUG_ON(cmd->cmd_in_wq);
- if (cmd->sg_mapped)
- qlt_unmap_sg(cmd->vha, cmd);
-
if (!cmd->q_full)
qlt_decr_num_pend_cmds(cmd->vha);
--
2.33.0
From: Eugene Crosser <[email protected]>
[ Upstream commit 55161e67d44fdd23900be166a81e996abd6e3be9 ]
This reverts commit 09e856d54bda5f288ef8437a90ab2b9b3eab83d1.
When an interface is enslaved in a VRF, prerouting conntrack hook is
called twice: once in the context of the original input interface, and
once in the context of the VRF interface. If no special precausions are
taken, this leads to creation of two conntrack entries instead of one,
and breaks SNAT.
Commit above was intended to avoid creation of extra conntrack entries
when input interface is enslaved in a VRF. It did so by resetting
conntrack related data associated with the skb when it enters VRF context.
However it breaks netfilter operation. Imagine a use case when conntrack
zone must be assigned based on the original input interface, rather than
VRF interface (that would make original interfaces indistinguishable). One
could create netfilter rules similar to these:
chain rawprerouting {
type filter hook prerouting priority raw;
iif realiface1 ct zone set 1 return
iif realiface2 ct zone set 2 return
}
This works before the mentioned commit, but not after: zone assignment
is "forgotten", and any subsequent NAT or filtering that is dependent
on the conntrack zone does not work.
Here is a reproducer script that demonstrates the difference in behaviour.
==========
#!/bin/sh
# This script demonstrates unexpected change of nftables behaviour
# caused by commit 09e856d54bda5f28 ""vrf: Reset skb conntrack
# connection on VRF rcv"
# https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=09e856d54bda5f288ef8437a90ab2b9b3eab83d1
#
# Before the commit, it was possible to assign conntrack zone to a
# packet (or mark it for `notracking`) in the prerouting chanin, raw
# priority, based on the `iif` (interface from which the packet
# arrived).
# After the change, # if the interface is enslaved in a VRF, such
# assignment is lost. Instead, assignment based on the `iif` matching
# the VRF master interface is honored. Thus it is impossible to
# distinguish packets based on the original interface.
#
# This script demonstrates this change of behaviour: conntrack zone 1
# or 2 is assigned depending on the match with the original interface
# or the vrf master interface. It can be observed that conntrack entry
# appears in different zone in the kernel versions before and after
# the commit.
IPIN=172.30.30.1
IPOUT=172.30.30.2
PFXL=30
ip li sh vein >/dev/null 2>&1 && ip li del vein
ip li sh tvrf >/dev/null 2>&1 && ip li del tvrf
nft list table testct >/dev/null 2>&1 && nft delete table testct
ip li add vein type veth peer veout
ip li add tvrf type vrf table 9876
ip li set veout master tvrf
ip li set vein up
ip li set veout up
ip li set tvrf up
/sbin/sysctl -w net.ipv4.conf.veout.accept_local=1
/sbin/sysctl -w net.ipv4.conf.veout.rp_filter=0
ip addr add $IPIN/$PFXL dev vein
ip addr add $IPOUT/$PFXL dev veout
nft -f - <<__END__
table testct {
chain rawpre {
type filter hook prerouting priority raw;
iif { veout, tvrf } meta nftrace set 1
iif veout ct zone set 1 return
iif tvrf ct zone set 2 return
notrack
}
chain rawout {
type filter hook output priority raw;
notrack
}
}
__END__
uname -rv
conntrack -F
ping -W 1 -c 1 -I vein $IPOUT
conntrack -L
Signed-off-by: Eugene Crosser <[email protected]>
Acked-by: David Ahern <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/vrf.c | 4 ----
1 file changed, 4 deletions(-)
diff --git a/drivers/net/vrf.c b/drivers/net/vrf.c
index 8bbe2a7bb141..2b1b944d4b28 100644
--- a/drivers/net/vrf.c
+++ b/drivers/net/vrf.c
@@ -1367,8 +1367,6 @@ static struct sk_buff *vrf_ip6_rcv(struct net_device *vrf_dev,
bool need_strict = rt6_need_strict(&ipv6_hdr(skb)->daddr);
bool is_ndisc = ipv6_ndisc_frame(skb);
- nf_reset_ct(skb);
-
/* loopback, multicast & non-ND link-local traffic; do not push through
* packet taps again. Reset pkt_type for upper layers to process skb.
* For strict packets with a source LLA, determine the dst using the
@@ -1431,8 +1429,6 @@ static struct sk_buff *vrf_ip_rcv(struct net_device *vrf_dev,
skb->skb_iif = vrf_dev->ifindex;
IPCB(skb)->flags |= IPSKB_L3SLAVE;
- nf_reset_ct(skb);
-
if (ipv4_is_multicast(ip_hdr(skb)->daddr))
goto out;
--
2.33.0
From: Zheyu Ma <[email protected]>
[ Upstream commit 06634d5b6e923ed0d4772aba8def5a618f44c7fe ]
The driver probing function should return < 0 for failure, otherwise
kernel will treat value > 0 as success.
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Himanshu Madhani <[email protected]>
Signed-off-by: Zheyu Ma <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/qla2xxx/qla_os.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 37ab71b6a8a7..5eed11042f78 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -4071,7 +4071,7 @@ qla2x00_mem_alloc(struct qla_hw_data *ha, uint16_t req_len, uint16_t rsp_len,
ql_dbg_pci(ql_dbg_init, ha->pdev,
0xe0ee, "%s: failed alloc dsd\n",
__func__);
- return 1;
+ return -ENOMEM;
}
ha->dif_bundle_kallocs++;
--
2.33.0
From: Erik Ekman <[email protected]>
[ Upstream commit c62041c5baa9ded3bc6fd38d3f724de70683b489 ]
The 1/10GbaseT modes were set up for cards with SFP+ cages in
3497ed8c852a5 ("sfc: report supported link speeds on SFP connections").
10GbaseT was likely used since no 10G fibre mode existed.
The missing fibre modes for 1/10G were added to ethtool.h in 5711a9822144
("net: ethtool: add support for 1000BaseX and missing 10G link modes")
shortly thereafter.
The user guide available at https://support-nic.xilinx.com/wp/drivers
lists support for the following cable and transceiver types in section 2.9:
- QSFP28 100G Direct Attach Cables
- QSFP28 100G SR Optical Transceivers (with SR4 modules listed)
- SFP28 25G Direct Attach Cables
- SFP28 25G SR Optical Transceivers
- QSFP+ 40G Direct Attach Cables
- QSFP+ 40G Active Optical Cables
- QSFP+ 40G SR4 Optical Transceivers
- QSFP+ to SFP+ Breakout Direct Attach Cables
- QSFP+ to SFP+ Breakout Active Optical Cables
- SFP+ 10G Direct Attach Cables
- SFP+ 10G SR Optical Transceivers
- SFP+ 10G LR Optical Transceivers
- SFP 1000BASE‐T Transceivers
- 1G Optical Transceivers
(From user guide issue 28. Issue 16 which also includes older cards like
SFN5xxx/SFN6xxx has matching lists for 1/10/40G transceiver types.)
Regarding SFP+ 10GBASE‐T transceivers the latest guide says:
"Solarflare adapters do not support 10GBASE‐T transceiver modules."
Tested using SFN5122F-R7 (with 2 SFP+ ports). Supported link modes do not change
depending on module used (tested with 1000BASE-T, 1000BASE-BX10, 10GBASE-LR).
Before:
$ ethtool ext
Settings for ext:
Supported ports: [ FIBRE ]
Supported link modes: 1000baseT/Full
10000baseT/Full
Supported pause frame use: Symmetric Receive-only
Supports auto-negotiation: No
Supported FEC modes: Not reported
Advertised link modes: Not reported
Advertised pause frame use: No
Advertised auto-negotiation: No
Advertised FEC modes: Not reported
Link partner advertised link modes: Not reported
Link partner advertised pause frame use: No
Link partner advertised auto-negotiation: No
Link partner advertised FEC modes: Not reported
Speed: 1000Mb/s
Duplex: Full
Auto-negotiation: off
Port: FIBRE
PHYAD: 255
Transceiver: internal
Current message level: 0x000020f7 (8439)
drv probe link ifdown ifup rx_err tx_err hw
Link detected: yes
After:
$ ethtool ext
Settings for ext:
Supported ports: [ FIBRE ]
Supported link modes: 1000baseT/Full
1000baseX/Full
10000baseCR/Full
10000baseSR/Full
10000baseLR/Full
Supported pause frame use: Symmetric Receive-only
Supports auto-negotiation: No
Supported FEC modes: Not reported
Advertised link modes: Not reported
Advertised pause frame use: No
Advertised auto-negotiation: No
Advertised FEC modes: Not reported
Link partner advertised link modes: Not reported
Link partner advertised pause frame use: No
Link partner advertised auto-negotiation: No
Link partner advertised FEC modes: Not reported
Speed: 1000Mb/s
Duplex: Full
Auto-negotiation: off
Port: FIBRE
PHYAD: 255
Transceiver: internal
Supports Wake-on: g
Wake-on: d
Current message level: 0x000020f7 (8439)
drv probe link ifdown ifup rx_err tx_err hw
Link detected: yes
Signed-off-by: Erik Ekman <[email protected]>
Acked-by: Martin Habets <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/sfc/mcdi_port_common.c | 37 +++++++++++++++------
1 file changed, 26 insertions(+), 11 deletions(-)
diff --git a/drivers/net/ethernet/sfc/mcdi_port_common.c b/drivers/net/ethernet/sfc/mcdi_port_common.c
index 4bd3ef8f3384..c4fe3c48ac46 100644
--- a/drivers/net/ethernet/sfc/mcdi_port_common.c
+++ b/drivers/net/ethernet/sfc/mcdi_port_common.c
@@ -132,16 +132,27 @@ void mcdi_to_ethtool_linkset(u32 media, u32 cap, unsigned long *linkset)
case MC_CMD_MEDIA_SFP_PLUS:
case MC_CMD_MEDIA_QSFP_PLUS:
SET_BIT(FIBRE);
- if (cap & (1 << MC_CMD_PHY_CAP_1000FDX_LBN))
+ if (cap & (1 << MC_CMD_PHY_CAP_1000FDX_LBN)) {
SET_BIT(1000baseT_Full);
- if (cap & (1 << MC_CMD_PHY_CAP_10000FDX_LBN))
- SET_BIT(10000baseT_Full);
- if (cap & (1 << MC_CMD_PHY_CAP_40000FDX_LBN))
+ SET_BIT(1000baseX_Full);
+ }
+ if (cap & (1 << MC_CMD_PHY_CAP_10000FDX_LBN)) {
+ SET_BIT(10000baseCR_Full);
+ SET_BIT(10000baseLR_Full);
+ SET_BIT(10000baseSR_Full);
+ }
+ if (cap & (1 << MC_CMD_PHY_CAP_40000FDX_LBN)) {
SET_BIT(40000baseCR4_Full);
- if (cap & (1 << MC_CMD_PHY_CAP_100000FDX_LBN))
+ SET_BIT(40000baseSR4_Full);
+ }
+ if (cap & (1 << MC_CMD_PHY_CAP_100000FDX_LBN)) {
SET_BIT(100000baseCR4_Full);
- if (cap & (1 << MC_CMD_PHY_CAP_25000FDX_LBN))
+ SET_BIT(100000baseSR4_Full);
+ }
+ if (cap & (1 << MC_CMD_PHY_CAP_25000FDX_LBN)) {
SET_BIT(25000baseCR_Full);
+ SET_BIT(25000baseSR_Full);
+ }
if (cap & (1 << MC_CMD_PHY_CAP_50000FDX_LBN))
SET_BIT(50000baseCR2_Full);
break;
@@ -192,15 +203,19 @@ u32 ethtool_linkset_to_mcdi_cap(const unsigned long *linkset)
result |= (1 << MC_CMD_PHY_CAP_100FDX_LBN);
if (TEST_BIT(1000baseT_Half))
result |= (1 << MC_CMD_PHY_CAP_1000HDX_LBN);
- if (TEST_BIT(1000baseT_Full) || TEST_BIT(1000baseKX_Full))
+ if (TEST_BIT(1000baseT_Full) || TEST_BIT(1000baseKX_Full) ||
+ TEST_BIT(1000baseX_Full))
result |= (1 << MC_CMD_PHY_CAP_1000FDX_LBN);
- if (TEST_BIT(10000baseT_Full) || TEST_BIT(10000baseKX4_Full))
+ if (TEST_BIT(10000baseT_Full) || TEST_BIT(10000baseKX4_Full) ||
+ TEST_BIT(10000baseCR_Full) || TEST_BIT(10000baseLR_Full) ||
+ TEST_BIT(10000baseSR_Full))
result |= (1 << MC_CMD_PHY_CAP_10000FDX_LBN);
- if (TEST_BIT(40000baseCR4_Full) || TEST_BIT(40000baseKR4_Full))
+ if (TEST_BIT(40000baseCR4_Full) || TEST_BIT(40000baseKR4_Full) ||
+ TEST_BIT(40000baseSR4_Full))
result |= (1 << MC_CMD_PHY_CAP_40000FDX_LBN);
- if (TEST_BIT(100000baseCR4_Full))
+ if (TEST_BIT(100000baseCR4_Full) || TEST_BIT(100000baseSR4_Full))
result |= (1 << MC_CMD_PHY_CAP_100000FDX_LBN);
- if (TEST_BIT(25000baseCR_Full))
+ if (TEST_BIT(25000baseCR_Full) || TEST_BIT(25000baseSR_Full))
result |= (1 << MC_CMD_PHY_CAP_25000FDX_LBN);
if (TEST_BIT(50000baseCR2_Full))
result |= (1 << MC_CMD_PHY_CAP_50000FDX_LBN);
--
2.33.0
From: Arnd Bergmann <[email protected]>
[ Upstream commit 8017c99680fa65e1e8d999df1583de476a187830 ]
On arm64 randconfig builds, hyperv sometimes fails with this
error:
In file included from drivers/hv/hv_trace.c:3:
In file included from drivers/hv/hyperv_vmbus.h:16:
In file included from arch/arm64/include/asm/sync_bitops.h:5:
arch/arm64/include/asm/bitops.h:11:2: error: only <linux/bitops.h> can be included directly
In file included from include/asm-generic/bitops/hweight.h:5:
include/asm-generic/bitops/arch_hweight.h:9:9: error: implicit declaration of function '__sw_hweight32' [-Werror,-Wimplicit-function-declaration]
include/asm-generic/bitops/atomic.h:17:7: error: implicit declaration of function 'BIT_WORD' [-Werror,-Wimplicit-function-declaration]
Include the correct header first.
Signed-off-by: Arnd Bergmann <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Wei Liu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hv/hyperv_vmbus.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/hv/hyperv_vmbus.h b/drivers/hv/hyperv_vmbus.h
index 42f3d9d123a1..d030577ad6a2 100644
--- a/drivers/hv/hyperv_vmbus.h
+++ b/drivers/hv/hyperv_vmbus.h
@@ -13,6 +13,7 @@
#define _HYPERV_VMBUS_H
#include <linux/list.h>
+#include <linux/bitops.h>
#include <asm/sync_bitops.h>
#include <asm/hyperv-tlfs.h>
#include <linux/atomic.h>
--
2.33.0
From: Zheyu Ma <[email protected]>
[ Upstream commit b2cddb44bddc1a9c5949a978bb454bba863264db ]
During the process of driver probing, the probe function should return < 0
for failure, otherwise, the kernel will treat value > 0 as success.
Signed-off-by: Zheyu Ma <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/cavium/thunder/nic_main.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/cavium/thunder/nic_main.c b/drivers/net/ethernet/cavium/thunder/nic_main.c
index 9361f964bb9b..816453a4f8d6 100644
--- a/drivers/net/ethernet/cavium/thunder/nic_main.c
+++ b/drivers/net/ethernet/cavium/thunder/nic_main.c
@@ -1193,7 +1193,7 @@ static int nic_register_interrupts(struct nicpf *nic)
dev_err(&nic->pdev->dev,
"Request for #%d msix vectors failed, returned %d\n",
nic->num_vec, ret);
- return 1;
+ return ret;
}
/* Register mailbox interrupt handler */
--
2.33.0
From: Erik Ekman <[email protected]>
[ Upstream commit bf6abf345dfa77786aca554bc58c64bd428ecb1d ]
Use pci_info instead to avoid unnamed/uninitialized noise:
[197088.688729] sfc 0000:01:00.0: Solarflare NIC detected
[197088.690333] sfc 0000:01:00.0: Part Number : SFN5122F
[197088.729061] sfc 0000:01:00.0 (unnamed net_device) (uninitialized): no SR-IOV VFs probed
[197088.729071] sfc 0000:01:00.0 (unnamed net_device) (uninitialized): no PTP support
Inspired by fa44821a4ddd ("sfc: don't use netif_info et al before
net_device is registered") from Heiner Kallweit.
Signed-off-by: Erik Ekman <[email protected]>
Acked-by: Martin Habets <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/sfc/ptp.c | 4 ++--
drivers/net/ethernet/sfc/siena_sriov.c | 2 +-
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/sfc/ptp.c b/drivers/net/ethernet/sfc/ptp.c
index a39c5143b386..797e51802ccb 100644
--- a/drivers/net/ethernet/sfc/ptp.c
+++ b/drivers/net/ethernet/sfc/ptp.c
@@ -648,7 +648,7 @@ static int efx_ptp_get_attributes(struct efx_nic *efx)
} else if (rc == -EINVAL) {
fmt = MC_CMD_PTP_OUT_GET_ATTRIBUTES_SECONDS_NANOSECONDS;
} else if (rc == -EPERM) {
- netif_info(efx, probe, efx->net_dev, "no PTP support\n");
+ pci_info(efx->pci_dev, "no PTP support\n");
return rc;
} else {
efx_mcdi_display_error(efx, MC_CMD_PTP, sizeof(inbuf),
@@ -824,7 +824,7 @@ static int efx_ptp_disable(struct efx_nic *efx)
* should only have been called during probe.
*/
if (rc == -ENOSYS || rc == -EPERM)
- netif_info(efx, probe, efx->net_dev, "no PTP support\n");
+ pci_info(efx->pci_dev, "no PTP support\n");
else if (rc)
efx_mcdi_display_error(efx, MC_CMD_PTP,
MC_CMD_PTP_IN_DISABLE_LEN,
diff --git a/drivers/net/ethernet/sfc/siena_sriov.c b/drivers/net/ethernet/sfc/siena_sriov.c
index 83dcfcae3d4b..441e7f3e5375 100644
--- a/drivers/net/ethernet/sfc/siena_sriov.c
+++ b/drivers/net/ethernet/sfc/siena_sriov.c
@@ -1057,7 +1057,7 @@ void efx_siena_sriov_probe(struct efx_nic *efx)
return;
if (efx_siena_sriov_cmd(efx, false, &efx->vi_scale, &count)) {
- netif_info(efx, probe, efx->net_dev, "no SR-IOV VFs probed\n");
+ pci_info(efx->pci_dev, "no SR-IOV VFs probed\n");
return;
}
if (count > 0 && count > max_vfs)
--
2.33.0
This needs 041c61488236a5a8 ("sfc: Fix reading non-legacy supported
link modes") from net-next to work for 10G/25G/50G/100G.
Thanks/
Erik
On Mon, 25 Oct 2021 at 19:00, Sasha Levin <[email protected]> wrote:
>
> From: Erik Ekman <[email protected]>
>
> [ Upstream commit c62041c5baa9ded3bc6fd38d3f724de70683b489 ]
>
> The 1/10GbaseT modes were set up for cards with SFP+ cages in
> 3497ed8c852a5 ("sfc: report supported link speeds on SFP connections").
> 10GbaseT was likely used since no 10G fibre mode existed.
>
> The missing fibre modes for 1/10G were added to ethtool.h in 5711a9822144
> ("net: ethtool: add support for 1000BaseX and missing 10G link modes")
> shortly thereafter.
>
> The user guide available at https://support-nic.xilinx.com/wp/drivers
> lists support for the following cable and transceiver types in section 2.9:
> - QSFP28 100G Direct Attach Cables
> - QSFP28 100G SR Optical Transceivers (with SR4 modules listed)
> - SFP28 25G Direct Attach Cables
> - SFP28 25G SR Optical Transceivers
> - QSFP+ 40G Direct Attach Cables
> - QSFP+ 40G Active Optical Cables
> - QSFP+ 40G SR4 Optical Transceivers
> - QSFP+ to SFP+ Breakout Direct Attach Cables
> - QSFP+ to SFP+ Breakout Active Optical Cables
> - SFP+ 10G Direct Attach Cables
> - SFP+ 10G SR Optical Transceivers
> - SFP+ 10G LR Optical Transceivers
> - SFP 1000BASE‐T Transceivers
> - 1G Optical Transceivers
> (From user guide issue 28. Issue 16 which also includes older cards like
> SFN5xxx/SFN6xxx has matching lists for 1/10/40G transceiver types.)
>
> Regarding SFP+ 10GBASE‐T transceivers the latest guide says:
> "Solarflare adapters do not support 10GBASE‐T transceiver modules."
>
> Tested using SFN5122F-R7 (with 2 SFP+ ports). Supported link modes do not change
> depending on module used (tested with 1000BASE-T, 1000BASE-BX10, 10GBASE-LR).
> Before:
>
> $ ethtool ext
> Settings for ext:
> Supported ports: [ FIBRE ]
> Supported link modes: 1000baseT/Full
> 10000baseT/Full
> Supported pause frame use: Symmetric Receive-only
> Supports auto-negotiation: No
> Supported FEC modes: Not reported
> Advertised link modes: Not reported
> Advertised pause frame use: No
> Advertised auto-negotiation: No
> Advertised FEC modes: Not reported
> Link partner advertised link modes: Not reported
> Link partner advertised pause frame use: No
> Link partner advertised auto-negotiation: No
> Link partner advertised FEC modes: Not reported
> Speed: 1000Mb/s
> Duplex: Full
> Auto-negotiation: off
> Port: FIBRE
> PHYAD: 255
> Transceiver: internal
> Current message level: 0x000020f7 (8439)
> drv probe link ifdown ifup rx_err tx_err hw
> Link detected: yes
>
> After:
>
> $ ethtool ext
> Settings for ext:
> Supported ports: [ FIBRE ]
> Supported link modes: 1000baseT/Full
> 1000baseX/Full
> 10000baseCR/Full
> 10000baseSR/Full
> 10000baseLR/Full
> Supported pause frame use: Symmetric Receive-only
> Supports auto-negotiation: No
> Supported FEC modes: Not reported
> Advertised link modes: Not reported
> Advertised pause frame use: No
> Advertised auto-negotiation: No
> Advertised FEC modes: Not reported
> Link partner advertised link modes: Not reported
> Link partner advertised pause frame use: No
> Link partner advertised auto-negotiation: No
> Link partner advertised FEC modes: Not reported
> Speed: 1000Mb/s
> Duplex: Full
> Auto-negotiation: off
> Port: FIBRE
> PHYAD: 255
> Transceiver: internal
> Supports Wake-on: g
> Wake-on: d
> Current message level: 0x000020f7 (8439)
> drv probe link ifdown ifup rx_err tx_err hw
> Link detected: yes
>
> Signed-off-by: Erik Ekman <[email protected]>
> Acked-by: Martin Habets <[email protected]>
> Signed-off-by: David S. Miller <[email protected]>
> Signed-off-by: Sasha Levin <[email protected]>
> ---
> drivers/net/ethernet/sfc/mcdi_port_common.c | 37 +++++++++++++++------
> 1 file changed, 26 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/net/ethernet/sfc/mcdi_port_common.c b/drivers/net/ethernet/sfc/mcdi_port_common.c
> index 4bd3ef8f3384..c4fe3c48ac46 100644
> --- a/drivers/net/ethernet/sfc/mcdi_port_common.c
> +++ b/drivers/net/ethernet/sfc/mcdi_port_common.c
> @@ -132,16 +132,27 @@ void mcdi_to_ethtool_linkset(u32 media, u32 cap, unsigned long *linkset)
> case MC_CMD_MEDIA_SFP_PLUS:
> case MC_CMD_MEDIA_QSFP_PLUS:
> SET_BIT(FIBRE);
> - if (cap & (1 << MC_CMD_PHY_CAP_1000FDX_LBN))
> + if (cap & (1 << MC_CMD_PHY_CAP_1000FDX_LBN)) {
> SET_BIT(1000baseT_Full);
> - if (cap & (1 << MC_CMD_PHY_CAP_10000FDX_LBN))
> - SET_BIT(10000baseT_Full);
> - if (cap & (1 << MC_CMD_PHY_CAP_40000FDX_LBN))
> + SET_BIT(1000baseX_Full);
> + }
> + if (cap & (1 << MC_CMD_PHY_CAP_10000FDX_LBN)) {
> + SET_BIT(10000baseCR_Full);
> + SET_BIT(10000baseLR_Full);
> + SET_BIT(10000baseSR_Full);
> + }
> + if (cap & (1 << MC_CMD_PHY_CAP_40000FDX_LBN)) {
> SET_BIT(40000baseCR4_Full);
> - if (cap & (1 << MC_CMD_PHY_CAP_100000FDX_LBN))
> + SET_BIT(40000baseSR4_Full);
> + }
> + if (cap & (1 << MC_CMD_PHY_CAP_100000FDX_LBN)) {
> SET_BIT(100000baseCR4_Full);
> - if (cap & (1 << MC_CMD_PHY_CAP_25000FDX_LBN))
> + SET_BIT(100000baseSR4_Full);
> + }
> + if (cap & (1 << MC_CMD_PHY_CAP_25000FDX_LBN)) {
> SET_BIT(25000baseCR_Full);
> + SET_BIT(25000baseSR_Full);
> + }
> if (cap & (1 << MC_CMD_PHY_CAP_50000FDX_LBN))
> SET_BIT(50000baseCR2_Full);
> break;
> @@ -192,15 +203,19 @@ u32 ethtool_linkset_to_mcdi_cap(const unsigned long *linkset)
> result |= (1 << MC_CMD_PHY_CAP_100FDX_LBN);
> if (TEST_BIT(1000baseT_Half))
> result |= (1 << MC_CMD_PHY_CAP_1000HDX_LBN);
> - if (TEST_BIT(1000baseT_Full) || TEST_BIT(1000baseKX_Full))
> + if (TEST_BIT(1000baseT_Full) || TEST_BIT(1000baseKX_Full) ||
> + TEST_BIT(1000baseX_Full))
> result |= (1 << MC_CMD_PHY_CAP_1000FDX_LBN);
> - if (TEST_BIT(10000baseT_Full) || TEST_BIT(10000baseKX4_Full))
> + if (TEST_BIT(10000baseT_Full) || TEST_BIT(10000baseKX4_Full) ||
> + TEST_BIT(10000baseCR_Full) || TEST_BIT(10000baseLR_Full) ||
> + TEST_BIT(10000baseSR_Full))
> result |= (1 << MC_CMD_PHY_CAP_10000FDX_LBN);
> - if (TEST_BIT(40000baseCR4_Full) || TEST_BIT(40000baseKR4_Full))
> + if (TEST_BIT(40000baseCR4_Full) || TEST_BIT(40000baseKR4_Full) ||
> + TEST_BIT(40000baseSR4_Full))
> result |= (1 << MC_CMD_PHY_CAP_40000FDX_LBN);
> - if (TEST_BIT(100000baseCR4_Full))
> + if (TEST_BIT(100000baseCR4_Full) || TEST_BIT(100000baseSR4_Full))
> result |= (1 << MC_CMD_PHY_CAP_100000FDX_LBN);
> - if (TEST_BIT(25000baseCR_Full))
> + if (TEST_BIT(25000baseCR_Full) || TEST_BIT(25000baseSR_Full))
> result |= (1 << MC_CMD_PHY_CAP_25000FDX_LBN);
> if (TEST_BIT(50000baseCR2_Full))
> result |= (1 << MC_CMD_PHY_CAP_50000FDX_LBN);
> --
> 2.33.0
>
From: Yang Yingliang <[email protected]>
[ Upstream commit c448b7aa3e66042fc0f849d9a0fb90d1af82e948 ]
'component' is allocated in snd_soc_register_component(), but component->list
is not initalized, this may cause snd_soc_del_component_unlocked() deref null
ptr in the error handing case.
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:__list_del_entry_valid+0x81/0xf0
Call Trace:
snd_soc_del_component_unlocked+0x69/0x1b0 [snd_soc_core]
snd_soc_add_component.cold+0x54/0x6c [snd_soc_core]
snd_soc_register_component+0x70/0x90 [snd_soc_core]
devm_snd_soc_register_component+0x5e/0xd0 [snd_soc_core]
tas2552_probe+0x265/0x320 [snd_soc_tas2552]
? tas2552_component_probe+0x1e0/0x1e0 [snd_soc_tas2552]
i2c_device_probe+0xa31/0xbe0
Fix by adding INIT_LIST_HEAD() to snd_soc_component_initialize().
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Yang Yingliang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/soc-core.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c
index 583f2381cfc8..e926985bb2f8 100644
--- a/sound/soc/soc-core.c
+++ b/sound/soc/soc-core.c
@@ -2599,6 +2599,7 @@ int snd_soc_component_initialize(struct snd_soc_component *component,
INIT_LIST_HEAD(&component->dai_list);
INIT_LIST_HEAD(&component->dobj_list);
INIT_LIST_HEAD(&component->card_list);
+ INIT_LIST_HEAD(&component->list);
mutex_init(&component->io_mutex);
component->name = fmt_single_name(dev, &component->id);
--
2.33.0
From: Zheyu Ma <[email protected]>
[ Upstream commit c69b2f46876825c726bd8a97c7fa852d8932bc32 ]
During the process of driver probing, the probe function should return < 0
for failure, otherwise, the kernel will treat value > 0 as success.
Signed-off-by: Zheyu Ma <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/cavium/thunder/nicvf_main.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/cavium/thunder/nicvf_main.c b/drivers/net/ethernet/cavium/thunder/nicvf_main.c
index e2b290135fd9..a61107e05216 100644
--- a/drivers/net/ethernet/cavium/thunder/nicvf_main.c
+++ b/drivers/net/ethernet/cavium/thunder/nicvf_main.c
@@ -1224,7 +1224,7 @@ static int nicvf_register_misc_interrupt(struct nicvf *nic)
if (ret < 0) {
netdev_err(nic->netdev,
"Req for #%d msix vectors failed\n", nic->num_vec);
- return 1;
+ return ret;
}
sprintf(nic->irq_name[irq], "%s Mbox", "NICVF");
@@ -1243,7 +1243,7 @@ static int nicvf_register_misc_interrupt(struct nicvf *nic)
if (!nicvf_check_pf_ready(nic)) {
nicvf_disable_intr(nic, NICVF_INTR_MBOX, 0);
nicvf_unregister_interrupts(nic);
- return 1;
+ return -EIO;
}
return 0;
--
2.33.0
From: Zheyu Ma <[email protected]>
[ Upstream commit e211210098cb7490db2183d725f5c0f10463a704 ]
During the process of driver probing, the probe function should return < 0
for failure, otherwise, the kernel will treat value > 0 as success.
Signed-off-by: Zheyu Ma <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/isdn/hardware/mISDN/hfcpci.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/isdn/hardware/mISDN/hfcpci.c b/drivers/isdn/hardware/mISDN/hfcpci.c
index e501cb03f211..bd087cca1c1d 100644
--- a/drivers/isdn/hardware/mISDN/hfcpci.c
+++ b/drivers/isdn/hardware/mISDN/hfcpci.c
@@ -1994,14 +1994,14 @@ setup_hw(struct hfc_pci *hc)
pci_set_master(hc->pdev);
if (!hc->irq) {
printk(KERN_WARNING "HFC-PCI: No IRQ for PCI card found\n");
- return 1;
+ return -EINVAL;
}
hc->hw.pci_io =
(char __iomem *)(unsigned long)hc->pdev->resource[1].start;
if (!hc->hw.pci_io) {
printk(KERN_WARNING "HFC-PCI: No IO-Mem for PCI card found\n");
- return 1;
+ return -ENOMEM;
}
/* Allocate memory for FIFOS */
/* the memory needs to be on a 32k boundary within the first 4G */
@@ -2012,7 +2012,7 @@ setup_hw(struct hfc_pci *hc)
if (!buffer) {
printk(KERN_WARNING
"HFC-PCI: Error allocating memory for FIFO!\n");
- return 1;
+ return -ENOMEM;
}
hc->hw.fifos = buffer;
pci_write_config_dword(hc->pdev, 0x80, hc->hw.dmahandle);
@@ -2022,7 +2022,7 @@ setup_hw(struct hfc_pci *hc)
"HFC-PCI: Error in ioremap for PCI!\n");
dma_free_coherent(&hc->pdev->dev, 0x8000, hc->hw.fifos,
hc->hw.dmahandle);
- return 1;
+ return -ENOMEM;
}
printk(KERN_INFO
--
2.33.0