The device described is the "DA9063", not "DA9093", so fix this typo.
Signed-off-by: Alexandre Ghiti <[email protected]>
---
Documentation/devicetree/bindings/mfd/da9063.txt | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/mfd/da9063.txt b/Documentation/devicetree/bindings/mfd/da9063.txt
index 8da879935c59..91b79a21d403 100644
--- a/Documentation/devicetree/bindings/mfd/da9063.txt
+++ b/Documentation/devicetree/bindings/mfd/da9063.txt
@@ -1,6 +1,6 @@
* Dialog DA9063/DA9063L Power Management Integrated Circuit (PMIC)
-DA9093 consists of a large and varied group of sub-devices (I2C Only):
+DA9063 consists of a large and varied group of sub-devices (I2C Only):
Device Supply Names Description
------ ------------ -----------
--
2.30.2
DA9063 devices bindings used text format, so migrate those bindings to YAML
format before adding any new bindings.
Signed-off-by: Alexandre Ghiti <[email protected]>
---
.../bindings/input/da9063-onkey.yaml | 39 ++++++
.../devicetree/bindings/mfd/da9063.txt | 111 ------------------
.../devicetree/bindings/mfd/da9063.yaml | 98 ++++++++++++++++
.../bindings/regulator/da9063-regulator.yaml | 51 ++++++++
.../devicetree/bindings/rtc/da9063-rtc.yaml | 31 +++++
.../bindings/watchdog/da9063-watchdog.yaml | 31 +++++
6 files changed, 250 insertions(+), 111 deletions(-)
create mode 100644 Documentation/devicetree/bindings/input/da9063-onkey.yaml
delete mode 100644 Documentation/devicetree/bindings/mfd/da9063.txt
create mode 100644 Documentation/devicetree/bindings/mfd/da9063.yaml
create mode 100644 Documentation/devicetree/bindings/regulator/da9063-regulator.yaml
create mode 100644 Documentation/devicetree/bindings/rtc/da9063-rtc.yaml
create mode 100644 Documentation/devicetree/bindings/watchdog/da9063-watchdog.yaml
diff --git a/Documentation/devicetree/bindings/input/da9063-onkey.yaml b/Documentation/devicetree/bindings/input/da9063-onkey.yaml
new file mode 100644
index 000000000000..e49f69f7aaac
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/da9063-onkey.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/da9063-onkey.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OnKey driver for Dialog DA9063/DA9063L Power Management Integrated Circuit (PMIC)
+
+maintainers:
+ - Support Opensource <[email protected]>
+
+description: |
+ This module is part of the DA9063 MFD device. For more details, see
+ Documentation/devicetree/bindings/mfd/da9063.yaml.
+
+ The OnKey controller is represented as a sub-node of the PMIC node
+ on the device tree.
+
+ This node defines the OnKey settings for controlling the key
+ functionality of the device. The node should contain the compatible property
+ with the value "dlg,da9063-onkey".
+
+properties:
+ compatible:
+ const: dlg,da9063-onkey
+
+ dlg,disable-key-power:
+ description: |
+ Disable power-down using a long key-press. If this
+ entry exists the OnKey driver will remove support for the KEY_POWER key
+ press. If this entry does not exist then by default the key-press
+ triggered power down is enabled and the OnKey will support both KEY_POWER
+ and KEY_SLEEP.
+ type: boolean
+
+required:
+ - compatible
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/mfd/da9063.txt b/Documentation/devicetree/bindings/mfd/da9063.txt
deleted file mode 100644
index 91b79a21d403..000000000000
--- a/Documentation/devicetree/bindings/mfd/da9063.txt
+++ /dev/null
@@ -1,111 +0,0 @@
-* Dialog DA9063/DA9063L Power Management Integrated Circuit (PMIC)
-
-DA9063 consists of a large and varied group of sub-devices (I2C Only):
-
-Device Supply Names Description
------- ------------ -----------
-da9063-regulator : : LDOs & BUCKs
-da9063-onkey : : On Key
-da9063-rtc : : Real-Time Clock (DA9063 only)
-da9063-watchdog : : Watchdog
-
-======
-
-Required properties:
-
-- compatible : Should be "dlg,da9063" or "dlg,da9063l"
-- reg : Specifies the I2C slave address (this defaults to 0x58 but it can be
- modified to match the chip's OTP settings).
-- interrupts : IRQ line information.
-- interrupt-controller
-
-Sub-nodes:
-
-- regulators : This node defines the settings for the LDOs and BUCKs.
- The DA9063(L) regulators are bound using their names listed below:
-
- bcore1 : BUCK CORE1
- bcore2 : BUCK CORE2
- bpro : BUCK PRO
- bmem : BUCK MEM
- bio : BUCK IO
- bperi : BUCK PERI
- ldo1 : LDO_1 (DA9063 only)
- ldo2 : LDO_2 (DA9063 only)
- ldo3 : LDO_3
- ldo4 : LDO_4 (DA9063 only)
- ldo5 : LDO_5 (DA9063 only)
- ldo6 : LDO_6 (DA9063 only)
- ldo7 : LDO_7
- ldo8 : LDO_8
- ldo9 : LDO_9
- ldo10 : LDO_10 (DA9063 only)
- ldo11 : LDO_11
-
- The component follows the standard regulator framework and the bindings
- details of individual regulator device can be found in:
- Documentation/devicetree/bindings/regulator/regulator.txt
-
-- rtc : This node defines settings for the Real-Time Clock associated with
- the DA9063 only. The RTC is not present in DA9063L. There are currently
- no entries in this binding, however compatible = "dlg,da9063-rtc" should
- be added if a node is created.
-
-- onkey : This node defines the OnKey settings for controlling the key
- functionality of the device. The node should contain the compatible property
- with the value "dlg,da9063-onkey".
-
- Optional onkey properties:
-
- - dlg,disable-key-power : Disable power-down using a long key-press. If this
- entry exists the OnKey driver will remove support for the KEY_POWER key
- press. If this entry does not exist then by default the key-press
- triggered power down is enabled and the OnKey will support both KEY_POWER
- and KEY_SLEEP.
-
-- watchdog : This node defines settings for the Watchdog timer associated
- with the DA9063 and DA9063L. There are currently no entries in this
- binding, however compatible = "dlg,da9063-watchdog" should be added
- if a node is created.
-
-
-Example:
-
- pmic0: da9063@58 {
- compatible = "dlg,da9063"
- reg = <0x58>;
- interrupt-parent = <&gpio6>;
- interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
- interrupt-controller;
-
- rtc {
- compatible = "dlg,da9063-rtc";
- };
-
- wdt {
- compatible = "dlg,da9063-watchdog";
- };
-
- onkey {
- compatible = "dlg,da9063-onkey";
- dlg,disable-key-power;
- };
-
- regulators {
- DA9063_BCORE1: bcore1 {
- regulator-name = "BCORE1";
- regulator-min-microvolt = <300000>;
- regulator-max-microvolt = <1570000>;
- regulator-min-microamp = <500000>;
- regulator-max-microamp = <2000000>;
- regulator-boot-on;
- };
- DA9063_LDO11: ldo11 {
- regulator-name = "LDO_11";
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <3600000>;
- regulator-boot-on;
- };
- };
- };
-
diff --git a/Documentation/devicetree/bindings/mfd/da9063.yaml b/Documentation/devicetree/bindings/mfd/da9063.yaml
new file mode 100644
index 000000000000..f3eedf766d29
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/da9063.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/da9063.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Dialog DA9063/DA9063L Power Management Integrated Circuit (PMIC)
+
+maintainers:
+ - Support Opensource <[email protected]>
+
+description: |
+ DA9063 consists of a large and varied group of sub-devices (I2C Only):
+
+ Device Supply Names Description
+ ------ ------------ -----------
+ da9063-regulator : : LDOs & BUCKs
+ da9063-onkey : : On Key
+ da9063-rtc : : Real-Time Clock (DA9063 only)
+ da9063-watchdog : : Watchdog
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - dlg,da9063
+ - dlg,da9063l
+
+ reg:
+ description:
+ I2C device address.
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+
+ regulators:
+ $ref: ../regulator/da9063-regulator.yaml
+
+ onkey:
+ $ref: ../input/da9063-onkey.yaml
+
+ rtc:
+ $ref: ../rtc/da9063-rtc.yaml
+
+ watchdog:
+ $ref: ../watchdog/da9063-watchdog.yaml
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-controller
+
+additionalProperties: false
+
+examples:
+ - |
+ pmic0: da9063@58 {
+ compatible = "dlg,da9063"
+ reg = <0x58>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+
+ rtc {
+ compatible = "dlg,da9063-rtc";
+ };
+
+ wdt {
+ compatible = "dlg,da9063-watchdog";
+ };
+
+ onkey {
+ compatible = "dlg,da9063-onkey";
+ dlg,disable-key-power;
+ };
+
+ regulators {
+ DA9063_BCORE1: bcore1 {
+ regulator-name = "BCORE1";
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1570000>;
+ regulator-min-microamp = <500000>;
+ regulator-max-microamp = <2000000>;
+ regulator-boot-on;
+ };
+ DA9063_LDO11: ldo11 {
+ regulator-name = "LDO_11";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <3600000>;
+ regulator-boot-on;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/regulator/da9063-regulator.yaml b/Documentation/devicetree/bindings/regulator/da9063-regulator.yaml
new file mode 100644
index 000000000000..49128cf7369e
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/da9063-regulator.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/da9063-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Regulator driver for Dialog DA9063/DA9063L Power Management Integrated Circuit (PMIC)
+
+maintainers:
+ - Support Opensource <[email protected]>
+
+description: |
+ This module is part of the DA9063 MFD device. For more details, see
+ Documentation/devicetree/bindings/mfd/da9063.yaml.
+
+ The regulator controller is represented as a sub-node of the PMIC node
+ on the device tree.
+
+ This node defines the settings for the LDOs and BUCKs.
+ The DA9063(L) regulators are bound using their names listed below:
+
+ bcore1 : BUCK CORE1
+ bcore2 : BUCK CORE2
+ bpro : BUCK PRO
+ bmem : BUCK MEM
+ bio : BUCK IO
+ bperi : BUCK PERI
+ ldo1 : LDO_1 (DA9063 only)
+ ldo2 : LDO_2 (DA9063 only)
+ ldo3 : LDO_3
+ ldo4 : LDO_4 (DA9063 only)
+ ldo5 : LDO_5 (DA9063 only)
+ ldo6 : LDO_6 (DA9063 only)
+ ldo7 : LDO_7
+ ldo8 : LDO_8
+ ldo9 : LDO_9
+ ldo10 : LDO_10 (DA9063 only)
+ ldo11 : LDO_11
+
+ The component follows the standard regulator framework and the bindings
+ details of individual regulator device can be found in:
+ Documentation/devicetree/bindings/regulator/regulator.txt
+
+properties:
+ compatible:
+ const: dlg,da9063-regulator
+
+required:
+ - compatible
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/rtc/da9063-rtc.yaml b/Documentation/devicetree/bindings/rtc/da9063-rtc.yaml
new file mode 100644
index 000000000000..3db1a9e5b572
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/da9063-rtc.yaml
@@ -0,0 +1,31 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/da9063-rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RTC driver for Dialog DA9063/DA9063L Power Management Integrated Circuit (PMIC)
+
+maintainers:
+ - Support Opensource <[email protected]>
+
+description:
+ This module is part of the DA9063 MFD device. For more details, see
+ Documentation/devicetree/bindings/mfd/da9063.yaml.
+
+ The RTC controller is represented as a sub-node of the PMIC node
+ on the device tree.
+
+ This node defines settings for the Real-Time Clock associated with
+ the DA9063 only. The RTC is not present in DA9063L. There are currently
+ no entries in this binding, however compatible = "dlg,da9063-rtc" should
+ be added if a node is created.
+
+properties:
+ compatible:
+ const: dlg,da9063-rtc
+
+required:
+ - compatible
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/watchdog/da9063-watchdog.yaml b/Documentation/devicetree/bindings/watchdog/da9063-watchdog.yaml
new file mode 100644
index 000000000000..d3286f4c04d2
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/da9063-watchdog.yaml
@@ -0,0 +1,31 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/da9063-watchdog.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Watchdog driver for Dialog DA9063/DA9063L Power Management Integrated Circuit (PMIC)
+
+maintainers:
+ - Support Opensource <[email protected]>
+
+description: |
+ This module is part of the DA9063 MFD device. For more details, see
+ Documentation/devicetree/bindings/mfd/da9063.yaml.
+
+ The watchdog controller is represented as a sub-node of the PMIC node
+ on the device tree.
+
+ This node defines settings for the Watchdog timer associated
+ with the DA9063 and DA9063L. There are currently no entries in this
+ binding, however compatible = "dlg,da9063-watchdog" should be added
+ if a node is created.
+
+properties:
+ compatible:
+ const: dlg,da9063-watchdog
+
+required:
+ - compatible
+
+additionalProperties: false
--
2.30.2
On Wed, 27 Oct 2021 07:23:23 +0200, Alexandre Ghiti wrote:
> DA9063 devices bindings used text format, so migrate those bindings to YAML
> format before adding any new bindings.
>
> Signed-off-by: Alexandre Ghiti <[email protected]>
> ---
> .../bindings/input/da9063-onkey.yaml | 39 ++++++
> .../devicetree/bindings/mfd/da9063.txt | 111 ------------------
> .../devicetree/bindings/mfd/da9063.yaml | 98 ++++++++++++++++
> .../bindings/regulator/da9063-regulator.yaml | 51 ++++++++
> .../devicetree/bindings/rtc/da9063-rtc.yaml | 31 +++++
> .../bindings/watchdog/da9063-watchdog.yaml | 31 +++++
> 6 files changed, 250 insertions(+), 111 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/input/da9063-onkey.yaml
> delete mode 100644 Documentation/devicetree/bindings/mfd/da9063.txt
> create mode 100644 Documentation/devicetree/bindings/mfd/da9063.yaml
> create mode 100644 Documentation/devicetree/bindings/regulator/da9063-regulator.yaml
> create mode 100644 Documentation/devicetree/bindings/rtc/da9063-rtc.yaml
> create mode 100644 Documentation/devicetree/bindings/watchdog/da9063-watchdog.yaml
>
My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):
yamllint warnings/errors:
./Documentation/devicetree/bindings/mfd/da9063.yaml:26:9: [warning] wrong indentation: expected 10 but found 8 (indentation)
./Documentation/devicetree/bindings/mfd/da9063.yaml:27:11: [warning] wrong indentation: expected 12 but found 10 (indentation)
dtschema/dtc warnings/errors:
Error: Documentation/devicetree/bindings/mfd/da9063.example.dts:21.17-18 syntax error
FATAL ERROR: Unable to parse input tree
make[1]: *** [scripts/Makefile.lib:385: Documentation/devicetree/bindings/mfd/da9063.example.dt.yaml] Error 1
make[1]: *** Waiting for unfinished jobs....
make: *** [Makefile:1441: dt_binding_check] Error 2
doc reference errors (make refcheckdocs):
Documentation/devicetree/bindings/input/da9062-onkey.txt: Documentation/devicetree/bindings/mfd/da9063.txt
See https://patchwork.ozlabs.org/patch/1546751
This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit.