Hi all,
This patch series add minimal change to provide mt7621 resets properly
defining them in the 'mediatek,mt7621-sysc' node which is the system
controller of the SoC and is already providing clocks to the rest of
the world.
There is shared architecture code for all ralink platforms in 'reset.c'
file located in 'arch/mips/ralink' but the correct thing to do to align
hardware with software seems to define and add related reset code to the
already mainlined clock driver.
After this changes, we can get rid of the useless reset controller node
in the device tree and use system controller node instead where the property
'#reset-cells' has been added. Binding documentation for this nodeq has
been updated with the new property accordly.
This series also provide a bindings include header where all related
reset bits for the MT7621 SoC are defined.
Also, please take a look to this review [0] to understand better motivation
for this series.
Regarding the way of merging this:
- I'd like patches 1 and 4 which are related going through staging tree.
- The other two (patches 2 and 3) can perfectly go through the clock tree.
Thanks in advance for your feedback.
Changes in v3:
- Collect Rob's Acked-by for patches 1 and 2.
- Rebase on the top of staging-next since there were already many
changes there and PATCH 4 of the series didn't apply cleanly.
Changes in v2:
- Address review comments of Dan Carpenter [1]:
+ Avoid 'inline' in function definition.
+ Return proper error codes (-EINVAL) instead of '-1'.
+ Make use of 'devm_kzalloc' instead of 'kzalloc'.
Best regards,
Sergio Paracuellos
Sergio Paracuellos (4):
dt-bindings: reset: add dt binding header for Mediatek MT7621 resets
dt-bindings: clock: mediatek,mt7621-sysc: add '#reset-cells' property
clk: ralink: make system controller node a reset provider
staging: mt7621-dts: align resets with binding documentation
.../bindings/clock/mediatek,mt7621-sysc.yaml | 12 +++
drivers/clk/ralink/clk-mt7621.c | 79 +++++++++++++++++++
drivers/staging/mt7621-dts/mt7621.dtsi | 25 +++---
include/dt-bindings/reset/mt7621-reset.h | 37 +++++++++
4 files changed, 139 insertions(+), 14 deletions(-)
create mode 100644 include/dt-bindings/reset/mt7621-reset.h
--
2.33.0
Make system controller a reset provider for all the peripherals in the
MT7621 SoC adding '#reset-cells' property.
Acked-by: Rob Herring <[email protected]>
Signed-off-by: Sergio Paracuellos <[email protected]>
---
.../bindings/clock/mediatek,mt7621-sysc.yaml | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/Documentation/devicetree/bindings/clock/mediatek,mt7621-sysc.yaml b/Documentation/devicetree/bindings/clock/mediatek,mt7621-sysc.yaml
index 915f84efd763..0c0b0ae5e2ac 100644
--- a/Documentation/devicetree/bindings/clock/mediatek,mt7621-sysc.yaml
+++ b/Documentation/devicetree/bindings/clock/mediatek,mt7621-sysc.yaml
@@ -22,6 +22,11 @@ description: |
The clocks are provided inside a system controller node.
+ This node is also a reset provider for all the peripherals.
+
+ Reset related bits are defined in:
+ [2]: <include/dt-bindings/reset/mt7621-reset.h>.
+
properties:
compatible:
items:
@@ -37,6 +42,12 @@ properties:
clocks.
const: 1
+ "#reset-cells":
+ description:
+ The first cell indicates the reset bit within the register, see
+ [2] for available resets.
+ const: 1
+
ralink,memctl:
$ref: /schemas/types.yaml#/definitions/phandle
description:
@@ -61,6 +72,7 @@ examples:
compatible = "mediatek,mt7621-sysc", "syscon";
reg = <0x0 0x100>;
#clock-cells = <1>;
+ #reset-cells = <1>;
ralink,memctl = <&memc>;
clock-output-names = "xtal", "cpu", "bus",
"50m", "125m", "150m",
--
2.33.0
MT7621 system controller node is already providing the clocks for the whole
system but must also serve as a reset provider. Hence, add reset controller
related code to the clock driver itself.
Signed-off-by: Sergio Paracuellos <[email protected]>
---
drivers/clk/ralink/clk-mt7621.c | 79 +++++++++++++++++++++++++++++++++
1 file changed, 79 insertions(+)
diff --git a/drivers/clk/ralink/clk-mt7621.c b/drivers/clk/ralink/clk-mt7621.c
index a2c045390f00..f149dd2d1325 100644
--- a/drivers/clk/ralink/clk-mt7621.c
+++ b/drivers/clk/ralink/clk-mt7621.c
@@ -11,14 +11,17 @@
#include <linux/mfd/syscon.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
+#include <linux/reset-controller.h>
#include <linux/slab.h>
#include <dt-bindings/clock/mt7621-clk.h>
+#include <dt-bindings/reset/mt7621-reset.h>
/* Configuration registers */
#define SYSC_REG_SYSTEM_CONFIG0 0x10
#define SYSC_REG_SYSTEM_CONFIG1 0x14
#define SYSC_REG_CLKCFG0 0x2c
#define SYSC_REG_CLKCFG1 0x30
+#define SYSC_REG_RESET_CTRL 0x34
#define SYSC_REG_CUR_CLK_STS 0x44
#define MEMC_REG_CPU_PLL 0x648
@@ -398,6 +401,76 @@ static void __init mt7621_clk_init(struct device_node *node)
}
CLK_OF_DECLARE_DRIVER(mt7621_clk, "mediatek,mt7621-sysc", mt7621_clk_init);
+struct mt7621_rst {
+ struct reset_controller_dev rcdev;
+ struct regmap *sysc;
+};
+
+static inline struct mt7621_rst *to_mt7621_rst(struct reset_controller_dev *dev)
+{
+ return container_of(dev, struct mt7621_rst, rcdev);
+}
+
+static int mt7621_assert_device(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ struct mt7621_rst *data = to_mt7621_rst(rcdev);
+ struct regmap *sysc = data->sysc;
+
+ if (id == MT7621_RST_SYS)
+ return -1;
+
+ return regmap_update_bits(sysc, SYSC_REG_RESET_CTRL, BIT(id), BIT(id));
+}
+
+static int mt7621_deassert_device(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ struct mt7621_rst *data = to_mt7621_rst(rcdev);
+ struct regmap *sysc = data->sysc;
+
+ if (id == MT7621_RST_SYS)
+ return -1;
+
+ return regmap_update_bits(sysc, SYSC_REG_RESET_CTRL, BIT(id), 0);
+}
+
+static int mt7621_reset_device(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ int ret;
+
+ ret = mt7621_assert_device(rcdev, id);
+ if (ret < 0)
+ return ret;
+
+ return mt7621_deassert_device(rcdev, id);
+}
+
+static const struct reset_control_ops reset_ops = {
+ .reset = mt7621_reset_device,
+ .assert = mt7621_assert_device,
+ .deassert = mt7621_deassert_device
+};
+
+static int mt7621_reset_init(struct device *dev, struct regmap *sysc)
+{
+ struct mt7621_rst *rst_data;
+
+ rst_data = kzalloc(sizeof(*rst_data), GFP_KERNEL);
+ if (!rst_data)
+ return -ENOMEM;
+
+ rst_data->sysc = sysc;
+ rst_data->rcdev.ops = &reset_ops;
+ rst_data->rcdev.owner = THIS_MODULE;
+ rst_data->rcdev.nr_resets = 32;
+ rst_data->rcdev.of_reset_n_cells = 1;
+ rst_data->rcdev.of_node = dev_of_node(dev);
+
+ return devm_reset_controller_register(dev, &rst_data->rcdev);
+}
+
static int mt7621_clk_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
@@ -424,6 +497,12 @@ static int mt7621_clk_probe(struct platform_device *pdev)
return ret;
}
+ ret = mt7621_reset_init(dev, priv->sysc);
+ if (ret) {
+ dev_err(dev, "Could not init reset controller\n");
+ return ret;
+ }
+
count = ARRAY_SIZE(mt7621_clks_base) +
ARRAY_SIZE(mt7621_fixed_clks) + ARRAY_SIZE(mt7621_gates);
clk_data = devm_kzalloc(dev, struct_size(clk_data, hws, count),
--
2.33.0
Binding documentation for compatible 'mediatek,mt7621-sysc' has been updated
to be used as a reset provider. Align reset related bits and system controller
node with binding documentation along the dtsi file.
Signed-off-by: Sergio Paracuellos <[email protected]>
---
drivers/staging/mt7621-dts/mt7621.dtsi | 25 +++++++++++--------------
1 file changed, 11 insertions(+), 14 deletions(-)
diff --git a/drivers/staging/mt7621-dts/mt7621.dtsi b/drivers/staging/mt7621-dts/mt7621.dtsi
index 6d158e4f4b8c..2bf74468d495 100644
--- a/drivers/staging/mt7621-dts/mt7621.dtsi
+++ b/drivers/staging/mt7621-dts/mt7621.dtsi
@@ -2,6 +2,7 @@
#include <dt-bindings/interrupt-controller/mips-gic.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/clock/mt7621-clk.h>
+#include <dt-bindings/reset/mt7621-reset.h>
/ {
#address-cells = <1>;
@@ -67,6 +68,7 @@ sysc: syscon@0 {
compatible = "mediatek,mt7621-sysc", "syscon";
reg = <0x0 0x100>;
#clock-cells = <1>;
+ #reset-cells = <1>;
ralink,memctl = <&memc>;
clock-output-names = "xtal", "cpu", "bus",
"50m", "125m", "150m",
@@ -96,7 +98,7 @@ i2c: i2c@900 {
clocks = <&sysc MT7621_CLK_I2C>;
clock-names = "i2c";
- resets = <&rstctrl 16>;
+ resets = <&sysc MT7621_RST_I2C>;
reset-names = "i2c";
#address-cells = <1>;
@@ -137,7 +139,7 @@ spi0: spi@b00 {
clocks = <&sysc MT7621_CLK_SPI>;
clock-names = "spi";
- resets = <&rstctrl 18>;
+ resets = <&sysc MT7621_RST_SPI>;
reset-names = "spi";
#address-cells = <1>;
@@ -153,7 +155,7 @@ gdma: gdma@2800 {
clocks = <&sysc MT7621_CLK_GDMA>;
clock-names = "gdma";
- resets = <&rstctrl 14>;
+ resets = <&sysc MT7621_RST_GDMA>;
reset-names = "dma";
interrupt-parent = <&gic>;
@@ -172,7 +174,7 @@ hsdma: hsdma@7000 {
clocks = <&sysc MT7621_CLK_HSDMA>;
clock-names = "hsdma";
- resets = <&rstctrl 5>;
+ resets = <&sysc MT7621_RST_HSDMA>;
reset-names = "hsdma";
interrupt-parent = <&gic>;
@@ -272,11 +274,6 @@ pinmux {
};
};
- rstctrl: rstctrl {
- compatible = "ralink,rt2880-reset";
- #reset-cells = <1>;
- };
-
sdhci: sdhci@1e130000 {
status = "disabled";
@@ -355,7 +352,7 @@ ethernet: ethernet@1e100000 {
#address-cells = <1>;
#size-cells = <0>;
- resets = <&rstctrl 6 &rstctrl 23>;
+ resets = <&sysc MT7621_CLK_FE &sysc MT7621_CLK_ETH>;
reset-names = "fe", "eth";
interrupt-parent = <&gic>;
@@ -400,7 +397,7 @@ switch0: switch0@0 {
#size-cells = <0>;
reg = <0>;
mediatek,mcm;
- resets = <&rstctrl 2>;
+ resets = <&sysc MT7621_RST_MCM>;
reset-names = "mcm";
interrupt-controller;
#interrupt-cells = <1>;
@@ -486,7 +483,7 @@ pcie@0,0 {
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &gic GIC_SHARED 4 IRQ_TYPE_LEVEL_HIGH>;
- resets = <&rstctrl 24>;
+ resets = <&sysc MT7621_RST_PCIE0>;
clocks = <&sysc MT7621_CLK_PCIE0>;
phys = <&pcie0_phy 1>;
phy-names = "pcie-phy0";
@@ -501,7 +498,7 @@ pcie@1,0 {
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &gic GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH>;
- resets = <&rstctrl 25>;
+ resets = <&sysc MT7621_RST_PCIE1>;
clocks = <&sysc MT7621_CLK_PCIE1>;
phys = <&pcie0_phy 1>;
phy-names = "pcie-phy1";
@@ -516,7 +513,7 @@ pcie@2,0 {
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &gic GIC_SHARED 25 IRQ_TYPE_LEVEL_HIGH>;
- resets = <&rstctrl 26>;
+ resets = <&sysc MT7621_RST_PCIE2>;
clocks = <&sysc MT7621_CLK_PCIE2>;
phys = <&pcie2_phy 0>;
phy-names = "pcie-phy2";
--
2.33.0