Add a HID_QUIRK_X_INVERT/HID_QUIRK_Y_INVERT quirk that can be used
to invert the X/Y values.
Signed-off-by: Alistair Francis <[email protected]>
---
drivers/hid/hid-input.c | 6 ++++++
include/linux/hid.h | 2 ++
2 files changed, 8 insertions(+)
diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c
index 4b5ebeacd283..173fcd3d92df 100644
--- a/drivers/hid/hid-input.c
+++ b/drivers/hid/hid-input.c
@@ -1328,6 +1328,12 @@ void hidinput_hid_event(struct hid_device *hid, struct hid_field *field, struct
input = field->hidinput->input;
+ if (usage->type == EV_ABS &&
+ (((*quirks & HID_QUIRK_X_INVERT) && usage->code == ABS_X) ||
+ ((*quirks & HID_QUIRK_Y_INVERT) && usage->code == ABS_Y))) {
+ value = field->logical_maximum - value;
+ }
+
if (usage->hat_min < usage->hat_max || usage->hat_dir) {
int hat_dir = usage->hat_dir;
if (!hat_dir)
diff --git a/include/linux/hid.h b/include/linux/hid.h
index 9e067f937dbc..4959385ca588 100644
--- a/include/linux/hid.h
+++ b/include/linux/hid.h
@@ -349,6 +349,8 @@ struct hid_item {
/* BIT(9) reserved for backward compatibility, was NO_INIT_INPUT_REPORTS */
#define HID_QUIRK_ALWAYS_POLL BIT(10)
#define HID_QUIRK_INPUT_PER_APP BIT(11)
+#define HID_QUIRK_X_INVERT BIT(12)
+#define HID_QUIRK_Y_INVERT BIT(13)
#define HID_QUIRK_SKIP_OUTPUT_REPORTS BIT(16)
#define HID_QUIRK_SKIP_OUTPUT_REPORT_ID BIT(17)
#define HID_QUIRK_NO_OUTPUT_REPORTS_ON_INTR_EP BIT(18)
--
2.31.1
Allow the touchscreen-inverted-x/y device tree properties to control the
HID_QUIRK_X_INVERT/HID_QUIRK_Y_INVERT quirks for the hid-input device.
Signed-off-by: Alistair Francis <[email protected]>
Acked-by: Rob Herring <[email protected]>
---
.../devicetree/bindings/input/hid-over-i2c.txt | 2 ++
drivers/hid/i2c-hid/i2c-hid-acpi.c | 2 +-
drivers/hid/i2c-hid/i2c-hid-core.c | 4 +++-
drivers/hid/i2c-hid/i2c-hid-of-goodix.c | 2 +-
drivers/hid/i2c-hid/i2c-hid-of.c | 11 ++++++++++-
drivers/hid/i2c-hid/i2c-hid.h | 2 +-
6 files changed, 18 insertions(+), 5 deletions(-)
diff --git a/Documentation/devicetree/bindings/input/hid-over-i2c.txt b/Documentation/devicetree/bindings/input/hid-over-i2c.txt
index c76bafaf98d2..34c43d3bddfd 100644
--- a/Documentation/devicetree/bindings/input/hid-over-i2c.txt
+++ b/Documentation/devicetree/bindings/input/hid-over-i2c.txt
@@ -32,6 +32,8 @@ device-specific compatible properties, which should be used in addition to the
- vdd-supply: phandle of the regulator that provides the supply voltage.
- post-power-on-delay-ms: time required by the device after enabling its regulators
or powering it on, before it is ready for communication.
+- touchscreen-inverted-x: See touchscreen.txt
+- touchscreen-inverted-y: See touchscreen.txt
Example:
diff --git a/drivers/hid/i2c-hid/i2c-hid-acpi.c b/drivers/hid/i2c-hid/i2c-hid-acpi.c
index a6f0257a26de..b96ae15e0ad9 100644
--- a/drivers/hid/i2c-hid/i2c-hid-acpi.c
+++ b/drivers/hid/i2c-hid/i2c-hid-acpi.c
@@ -111,7 +111,7 @@ static int i2c_hid_acpi_probe(struct i2c_client *client)
}
return i2c_hid_core_probe(client, &ihid_acpi->ops,
- hid_descriptor_address);
+ hid_descriptor_address, 0);
}
static const struct acpi_device_id i2c_hid_acpi_match[] = {
diff --git a/drivers/hid/i2c-hid/i2c-hid-core.c b/drivers/hid/i2c-hid/i2c-hid-core.c
index 517141138b00..4804d71e5293 100644
--- a/drivers/hid/i2c-hid/i2c-hid-core.c
+++ b/drivers/hid/i2c-hid/i2c-hid-core.c
@@ -912,7 +912,7 @@ static void i2c_hid_core_shutdown_tail(struct i2c_hid *ihid)
}
int i2c_hid_core_probe(struct i2c_client *client, struct i2chid_ops *ops,
- u16 hid_descriptor_address)
+ u16 hid_descriptor_address, u32 quirks)
{
int ret;
struct i2c_hid *ihid;
@@ -1009,6 +1009,8 @@ int i2c_hid_core_probe(struct i2c_client *client, struct i2chid_ops *ops,
goto err_mem_free;
}
+ hid->quirks |= quirks;
+
return 0;
err_mem_free:
diff --git a/drivers/hid/i2c-hid/i2c-hid-of-goodix.c b/drivers/hid/i2c-hid/i2c-hid-of-goodix.c
index 52674149a275..b4dad66fa954 100644
--- a/drivers/hid/i2c-hid/i2c-hid-of-goodix.c
+++ b/drivers/hid/i2c-hid/i2c-hid-of-goodix.c
@@ -150,7 +150,7 @@ static int i2c_hid_of_goodix_probe(struct i2c_client *client,
goodix_i2c_hid_deassert_reset(ihid_goodix, true);
mutex_unlock(&ihid_goodix->regulator_mutex);
- return i2c_hid_core_probe(client, &ihid_goodix->ops, 0x0001);
+ return i2c_hid_core_probe(client, &ihid_goodix->ops, 0x0001, 0);
}
static const struct goodix_i2c_hid_timing_data goodix_gt7375p_timing_data = {
diff --git a/drivers/hid/i2c-hid/i2c-hid-of.c b/drivers/hid/i2c-hid/i2c-hid-of.c
index 4bf7cea92637..b16349d6e9de 100644
--- a/drivers/hid/i2c-hid/i2c-hid-of.c
+++ b/drivers/hid/i2c-hid/i2c-hid-of.c
@@ -21,6 +21,7 @@
#include <linux/delay.h>
#include <linux/device.h>
+#include <linux/hid.h>
#include <linux/i2c.h>
#include <linux/kernel.h>
#include <linux/module.h>
@@ -71,6 +72,7 @@ static int i2c_hid_of_probe(struct i2c_client *client,
struct device *dev = &client->dev;
struct i2c_hid_of *ihid_of;
u16 hid_descriptor_address;
+ u32 quirks = 0;
int ret;
u32 val;
@@ -105,8 +107,15 @@ static int i2c_hid_of_probe(struct i2c_client *client,
if (ret)
return ret;
+ if (device_property_read_bool(dev, "touchscreen-inverted-x")) {
+ quirks |= HID_QUIRK_X_INVERT;
+ }
+ if (device_property_read_bool(dev, "touchscreen-inverted-y")) {
+ quirks |= HID_QUIRK_Y_INVERT;
+ }
+
return i2c_hid_core_probe(client, &ihid_of->ops,
- hid_descriptor_address);
+ hid_descriptor_address, quirks);
}
static const struct of_device_id i2c_hid_of_match[] = {
diff --git a/drivers/hid/i2c-hid/i2c-hid.h b/drivers/hid/i2c-hid/i2c-hid.h
index 05a7827d211a..236cc062d5ef 100644
--- a/drivers/hid/i2c-hid/i2c-hid.h
+++ b/drivers/hid/i2c-hid/i2c-hid.h
@@ -32,7 +32,7 @@ struct i2chid_ops {
};
int i2c_hid_core_probe(struct i2c_client *client, struct i2chid_ops *ops,
- u16 hid_descriptor_address);
+ u16 hid_descriptor_address, u32 quirks);
int i2c_hid_core_remove(struct i2c_client *client);
void i2c_hid_core_shutdown(struct i2c_client *client);
--
2.31.1
Signed-off-by: Alistair Francis <[email protected]>
---
arch/arm/boot/dts/imx7d-remarkable2.dts | 59 +++++++++++++++++++++++++
1 file changed, 59 insertions(+)
diff --git a/arch/arm/boot/dts/imx7d-remarkable2.dts b/arch/arm/boot/dts/imx7d-remarkable2.dts
index 89cbf13097a4..a2a91bfdd98e 100644
--- a/arch/arm/boot/dts/imx7d-remarkable2.dts
+++ b/arch/arm/boot/dts/imx7d-remarkable2.dts
@@ -34,6 +34,19 @@ reg_brcm: regulator-brcm {
startup-delay-us = <150>;
};
+ reg_digitizer: regulator-digitizer {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD_3V3_DIGITIZER";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pinctrl_digitizer_reg>;
+ pinctrl-1 = <&pinctrl_digitizer_reg>;
+ gpio = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ startup-delay-us = <100000>; /* 100 ms */
+ };
+
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
pinctrl-names = "default";
@@ -51,6 +64,26 @@ &clks {
assigned-clock-rates = <0>, <32768>;
};
+&i2c1 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ wacom_digitizer: digitizer@9 {
+ compatible = "hid-over-i2c";
+ reg = <0x09>;
+ hid-descr-addr = <0x01>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wacom>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+ touchscreen-inverted-x;
+ touchscreen-inverted-y;
+ vdd-supply = <®_digitizer>;
+ };
+};
+
&snvs_pwrkey {
status = "okay";
};
@@ -117,6 +150,25 @@ &wdog1 {
fsl,ext-reset-output;
};
+&iomuxc_lpsr {
+ pinctrl_digitizer_reg: digitizerreggrp {
+ fsl,pins = <
+ /* DIGITIZER_PWR_EN */
+ MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6 0x14
+ >;
+ };
+
+ pinctrl_wacom: wacomgrp {
+ fsl,pins = <
+ /*MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5 0x00000014 FWE */
+ MX7D_PAD_LPSR_GPIO1_IO04__GPIO1_IO4 0x00000074 /* PDCTB */
+ MX7D_PAD_LPSR_GPIO1_IO01__GPIO1_IO1 0x00000034 /* WACOM INT */
+ /*MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6 0x00000014 WACOM PWR ENABLE */
+ /*MX7D_PAD_LPSR_GPIO1_IO00__GPIO1_IO0 0x00000074 WACOM RESET */
+ >;
+ };
+};
+
&iomuxc {
pinctrl_brcm_reg: brcmreggrp {
fsl,pins = <
@@ -125,6 +177,13 @@ MX7D_PAD_SAI1_TX_BCLK__GPIO6_IO13 0x14
>;
};
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX7D_PAD_I2C1_SDA__I2C1_SDA 0x4000007f
+ MX7D_PAD_I2C1_SCL__I2C1_SCL 0x4000007f
+ >;
+ };
+
pinctrl_uart1: uart1grp {
fsl,pins = <
MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79
--
2.31.1