A new commit in LLVM causes an error on the use of 'long double' when
'-mno-x87' is used, which the kernel does through an alias,
'-mno-80387' (see the LLVM commit below for more details around why it
does this).
drivers/usb/dwc2/hcd_queue.c:1744:25: error: expression requires 'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
delay = ktime_set(0, DWC2_RETRY_WAIT_DELAY);
^
drivers/usb/dwc2/hcd_queue.c:62:34: note: expanded from macro 'DWC2_RETRY_WAIT_DELAY'
#define DWC2_RETRY_WAIT_DELAY (1 * 1E6L)
^
1 error generated.
This happens due to the use of a 'long double' literal. The 'E6' part of
'1E6L' causes the literal to be a 'double' then the 'L' suffix promotes
it to 'long double'.
There is no visible reason for a floating point value in this driver, as
the value is only used as a parameter to a function that expects an
integer type. Use USEC_PER_SEC, which is the same integer value as
'1E6L', to avoid changing functionality but fix the error.
Fixes: 6ed30a7d8ec2 ("usb: dwc2: host: use hrtimer for NAK retries")
Link: https://github.com/ClangBuiltLinux/linux/issues/1497
Link: https://github.com/llvm/llvm-project/commit/a8083d42b1c346e21623a1d36d1f0cadd7801d83
Signed-off-by: Nathan Chancellor <[email protected]>
---
drivers/usb/dwc2/hcd_queue.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/dwc2/hcd_queue.c b/drivers/usb/dwc2/hcd_queue.c
index 89a788326c56..bdf1927e1be1 100644
--- a/drivers/usb/dwc2/hcd_queue.c
+++ b/drivers/usb/dwc2/hcd_queue.c
@@ -59,7 +59,7 @@
#define DWC2_UNRESERVE_DELAY (msecs_to_jiffies(5))
/* If we get a NAK, wait this long before retrying */
-#define DWC2_RETRY_WAIT_DELAY (1 * 1E6L)
+#define DWC2_RETRY_WAIT_DELAY (1 * USEC_PER_SEC)
/**
* dwc2_periodic_channel_available() - Checks that a channel is available for a
base-commit: d4439a1189f93d0ac1eaf0197db8e6b3e197d5c7
--
2.34.0.rc0
On Thu, Nov 4, 2021 at 4:29 PM Nick Desaulniers <[email protected]> wrote:
>
> On Thu, Nov 4, 2021 at 2:59 PM Nathan Chancellor <[email protected]> wrote:
> >
> > A new commit in LLVM causes an error on the use of 'long double' when
> > '-mno-x87' is used, which the kernel does through an alias,
> > '-mno-80387' (see the LLVM commit below for more details around why it
> > does this).
> >
> > drivers/usb/dwc2/hcd_queue.c:1744:25: error: expression requires 'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
> > delay = ktime_set(0, DWC2_RETRY_WAIT_DELAY);
> > ^
> > drivers/usb/dwc2/hcd_queue.c:62:34: note: expanded from macro 'DWC2_RETRY_WAIT_DELAY'
> > #define DWC2_RETRY_WAIT_DELAY (1 * 1E6L)
> > ^
> > 1 error generated.
> >
> > This happens due to the use of a 'long double' literal. The 'E6' part of
> > '1E6L' causes the literal to be a 'double' then the 'L' suffix promotes
> > it to 'long double'.
> >
> > There is no visible reason for a floating point value in this driver, as
> > the value is only used as a parameter to a function that expects an
> > integer type. Use USEC_PER_SEC, which is the same integer value as
> > '1E6L', to avoid changing functionality but fix the error.
> >
> > Fixes: 6ed30a7d8ec2 ("usb: dwc2: host: use hrtimer for NAK retries")
> > Link: https://github.com/ClangBuiltLinux/linux/issues/1497
> > Link: https://github.com/llvm/llvm-project/commit/a8083d42b1c346e21623a1d36d1f0cadd7801d83
> > Signed-off-by: Nathan Chancellor <[email protected]>
>
> Thanks for the patch!
> Reviewed-by: Nick Desaulniers <[email protected]>
hmm...should we explicitly #include <vdso/time.h> for this
declaration? It may work due to transitive includes, but that's
generally considered brittle should those transitive includes change
in the future.
>
> > ---
> > drivers/usb/dwc2/hcd_queue.c | 2 +-
> > 1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/drivers/usb/dwc2/hcd_queue.c b/drivers/usb/dwc2/hcd_queue.c
> > index 89a788326c56..bdf1927e1be1 100644
> > --- a/drivers/usb/dwc2/hcd_queue.c
> > +++ b/drivers/usb/dwc2/hcd_queue.c
> > @@ -59,7 +59,7 @@
> > #define DWC2_UNRESERVE_DELAY (msecs_to_jiffies(5))
> >
> > /* If we get a NAK, wait this long before retrying */
> > -#define DWC2_RETRY_WAIT_DELAY (1 * 1E6L)
> > +#define DWC2_RETRY_WAIT_DELAY (1 * USEC_PER_SEC)
> >
> > /**
> > * dwc2_periodic_channel_available() - Checks that a channel is available for a
> >
> > base-commit: d4439a1189f93d0ac1eaf0197db8e6b3e197d5c7
> > --
> > 2.34.0.rc0
> >
>
>
> --
> Thanks,
> ~Nick Desaulniers
--
Thanks,
~Nick Desaulniers
On Thu, Nov 04, 2021 at 04:33:41PM -0700, Nick Desaulniers wrote:
> On Thu, Nov 4, 2021 at 4:29 PM Nick Desaulniers <[email protected]> wrote:
> >
> > On Thu, Nov 4, 2021 at 2:59 PM Nathan Chancellor <[email protected]> wrote:
> > >
> > > A new commit in LLVM causes an error on the use of 'long double' when
> > > '-mno-x87' is used, which the kernel does through an alias,
> > > '-mno-80387' (see the LLVM commit below for more details around why it
> > > does this).
> > >
> > > drivers/usb/dwc2/hcd_queue.c:1744:25: error: expression requires 'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
> > > delay = ktime_set(0, DWC2_RETRY_WAIT_DELAY);
> > > ^
> > > drivers/usb/dwc2/hcd_queue.c:62:34: note: expanded from macro 'DWC2_RETRY_WAIT_DELAY'
> > > #define DWC2_RETRY_WAIT_DELAY (1 * 1E6L)
> > > ^
> > > 1 error generated.
> > >
> > > This happens due to the use of a 'long double' literal. The 'E6' part of
> > > '1E6L' causes the literal to be a 'double' then the 'L' suffix promotes
> > > it to 'long double'.
> > >
> > > There is no visible reason for a floating point value in this driver, as
> > > the value is only used as a parameter to a function that expects an
> > > integer type. Use USEC_PER_SEC, which is the same integer value as
> > > '1E6L', to avoid changing functionality but fix the error.
> > >
> > > Fixes: 6ed30a7d8ec2 ("usb: dwc2: host: use hrtimer for NAK retries")
> > > Link: https://github.com/ClangBuiltLinux/linux/issues/1497
> > > Link: https://github.com/llvm/llvm-project/commit/a8083d42b1c346e21623a1d36d1f0cadd7801d83
> > > Signed-off-by: Nathan Chancellor <[email protected]>
> >
> > Thanks for the patch!
> > Reviewed-by: Nick Desaulniers <[email protected]>
>
> hmm...should we explicitly #include <vdso/time.h> for this
> declaration? It may work due to transitive includes, but that's
> generally considered brittle should those transitive includes change
> in the future.
This file uses ktime_t, which comes from include/linux/ktime.h, which
eventually includes include/vdso/time64.h. include/vdso/time64.h is only
included in three header files and no drivers so I do not think this is
that brittle. I am happy to change that if the maintainers feel it is
worth the extra include.
> >
> > > ---
> > > drivers/usb/dwc2/hcd_queue.c | 2 +-
> > > 1 file changed, 1 insertion(+), 1 deletion(-)
> > >
> > > diff --git a/drivers/usb/dwc2/hcd_queue.c b/drivers/usb/dwc2/hcd_queue.c
> > > index 89a788326c56..bdf1927e1be1 100644
> > > --- a/drivers/usb/dwc2/hcd_queue.c
> > > +++ b/drivers/usb/dwc2/hcd_queue.c
> > > @@ -59,7 +59,7 @@
> > > #define DWC2_UNRESERVE_DELAY (msecs_to_jiffies(5))
> > >
> > > /* If we get a NAK, wait this long before retrying */
> > > -#define DWC2_RETRY_WAIT_DELAY (1 * 1E6L)
> > > +#define DWC2_RETRY_WAIT_DELAY (1 * USEC_PER_SEC)
> > >
> > > /**
> > > * dwc2_periodic_channel_available() - Checks that a channel is available for a
> > >
> > > base-commit: d4439a1189f93d0ac1eaf0197db8e6b3e197d5c7
> > > --
> > > 2.34.0.rc0
> > >
> >
> >
> > --
> > Thanks,
> > ~Nick Desaulniers
>
>
>
> --
> Thanks,
> ~Nick Desaulniers
On Thu, Nov 4, 2021 at 2:59 PM Nathan Chancellor <[email protected]> wrote:
>
> A new commit in LLVM causes an error on the use of 'long double' when
> '-mno-x87' is used, which the kernel does through an alias,
> '-mno-80387' (see the LLVM commit below for more details around why it
> does this).
>
> drivers/usb/dwc2/hcd_queue.c:1744:25: error: expression requires 'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
> delay = ktime_set(0, DWC2_RETRY_WAIT_DELAY);
> ^
> drivers/usb/dwc2/hcd_queue.c:62:34: note: expanded from macro 'DWC2_RETRY_WAIT_DELAY'
> #define DWC2_RETRY_WAIT_DELAY (1 * 1E6L)
> ^
> 1 error generated.
>
> This happens due to the use of a 'long double' literal. The 'E6' part of
> '1E6L' causes the literal to be a 'double' then the 'L' suffix promotes
> it to 'long double'.
>
> There is no visible reason for a floating point value in this driver, as
> the value is only used as a parameter to a function that expects an
> integer type. Use USEC_PER_SEC, which is the same integer value as
> '1E6L', to avoid changing functionality but fix the error.
>
> Fixes: 6ed30a7d8ec2 ("usb: dwc2: host: use hrtimer for NAK retries")
> Link: https://github.com/ClangBuiltLinux/linux/issues/1497
> Link: https://github.com/llvm/llvm-project/commit/a8083d42b1c346e21623a1d36d1f0cadd7801d83
> Signed-off-by: Nathan Chancellor <[email protected]>
Thanks for the patch!
Reviewed-by: Nick Desaulniers <[email protected]>
> ---
> drivers/usb/dwc2/hcd_queue.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/usb/dwc2/hcd_queue.c b/drivers/usb/dwc2/hcd_queue.c
> index 89a788326c56..bdf1927e1be1 100644
> --- a/drivers/usb/dwc2/hcd_queue.c
> +++ b/drivers/usb/dwc2/hcd_queue.c
> @@ -59,7 +59,7 @@
> #define DWC2_UNRESERVE_DELAY (msecs_to_jiffies(5))
>
> /* If we get a NAK, wait this long before retrying */
> -#define DWC2_RETRY_WAIT_DELAY (1 * 1E6L)
> +#define DWC2_RETRY_WAIT_DELAY (1 * USEC_PER_SEC)
>
> /**
> * dwc2_periodic_channel_available() - Checks that a channel is available for a
>
> base-commit: d4439a1189f93d0ac1eaf0197db8e6b3e197d5c7
> --
> 2.34.0.rc0
>
--
Thanks,
~Nick Desaulniers
On Thu, Nov 04, 2021 at 02:59:23PM -0700, Nathan Chancellor wrote:
> A new commit in LLVM causes an error on the use of 'long double' when
> '-mno-x87' is used, which the kernel does through an alias,
> '-mno-80387' (see the LLVM commit below for more details around why it
> does this).
>
> drivers/usb/dwc2/hcd_queue.c:1744:25: error: expression requires 'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
> delay = ktime_set(0, DWC2_RETRY_WAIT_DELAY);
> ^
> drivers/usb/dwc2/hcd_queue.c:62:34: note: expanded from macro 'DWC2_RETRY_WAIT_DELAY'
> #define DWC2_RETRY_WAIT_DELAY (1 * 1E6L)
> ^
> 1 error generated.
>
> This happens due to the use of a 'long double' literal. The 'E6' part of
> '1E6L' causes the literal to be a 'double' then the 'L' suffix promotes
> it to 'long double'.
>
> There is no visible reason for a floating point value in this driver, as
> the value is only used as a parameter to a function that expects an
> integer type. Use USEC_PER_SEC, which is the same integer value as
> '1E6L', to avoid changing functionality but fix the error.
>
> Fixes: 6ed30a7d8ec2 ("usb: dwc2: host: use hrtimer for NAK retries")
> Link: https://github.com/ClangBuiltLinux/linux/issues/1497
> Link: https://github.com/llvm/llvm-project/commit/a8083d42b1c346e21623a1d36d1f0cadd7801d83
> Signed-off-by: Nathan Chancellor <[email protected]>
> ---
> drivers/usb/dwc2/hcd_queue.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/usb/dwc2/hcd_queue.c b/drivers/usb/dwc2/hcd_queue.c
> index 89a788326c56..bdf1927e1be1 100644
> --- a/drivers/usb/dwc2/hcd_queue.c
> +++ b/drivers/usb/dwc2/hcd_queue.c
> @@ -59,7 +59,7 @@
> #define DWC2_UNRESERVE_DELAY (msecs_to_jiffies(5))
>
> /* If we get a NAK, wait this long before retrying */
> -#define DWC2_RETRY_WAIT_DELAY (1 * 1E6L)
> +#define DWC2_RETRY_WAIT_DELAY (1 * USEC_PER_SEC)
Using USEC_PER_SEC here seems quite weird. This is used as:
delay = ktime_set(0, DWC2_RETRY_WAIT_DELAY);
so the units are nanoseconds.
Maybe NSEC_PER_MSEC would better indicate the intent here?
On Fri, Nov 05, 2021 at 01:08:48PM +0000, John Keeping wrote:
> On Thu, Nov 04, 2021 at 02:59:23PM -0700, Nathan Chancellor wrote:
> > A new commit in LLVM causes an error on the use of 'long double' when
> > '-mno-x87' is used, which the kernel does through an alias,
> > '-mno-80387' (see the LLVM commit below for more details around why it
> > does this).
> >
> > drivers/usb/dwc2/hcd_queue.c:1744:25: error: expression requires 'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it
> > delay = ktime_set(0, DWC2_RETRY_WAIT_DELAY);
> > ^
> > drivers/usb/dwc2/hcd_queue.c:62:34: note: expanded from macro 'DWC2_RETRY_WAIT_DELAY'
> > #define DWC2_RETRY_WAIT_DELAY (1 * 1E6L)
> > ^
> > 1 error generated.
> >
> > This happens due to the use of a 'long double' literal. The 'E6' part of
> > '1E6L' causes the literal to be a 'double' then the 'L' suffix promotes
> > it to 'long double'.
> >
> > There is no visible reason for a floating point value in this driver, as
> > the value is only used as a parameter to a function that expects an
> > integer type. Use USEC_PER_SEC, which is the same integer value as
> > '1E6L', to avoid changing functionality but fix the error.
> >
> > Fixes: 6ed30a7d8ec2 ("usb: dwc2: host: use hrtimer for NAK retries")
> > Link: https://github.com/ClangBuiltLinux/linux/issues/1497
> > Link: https://github.com/llvm/llvm-project/commit/a8083d42b1c346e21623a1d36d1f0cadd7801d83
> > Signed-off-by: Nathan Chancellor <[email protected]>
> > ---
> > drivers/usb/dwc2/hcd_queue.c | 2 +-
> > 1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/drivers/usb/dwc2/hcd_queue.c b/drivers/usb/dwc2/hcd_queue.c
> > index 89a788326c56..bdf1927e1be1 100644
> > --- a/drivers/usb/dwc2/hcd_queue.c
> > +++ b/drivers/usb/dwc2/hcd_queue.c
> > @@ -59,7 +59,7 @@
> > #define DWC2_UNRESERVE_DELAY (msecs_to_jiffies(5))
> >
> > /* If we get a NAK, wait this long before retrying */
> > -#define DWC2_RETRY_WAIT_DELAY (1 * 1E6L)
> > +#define DWC2_RETRY_WAIT_DELAY (1 * USEC_PER_SEC)
>
> Using USEC_PER_SEC here seems quite weird. This is used as:
>
> delay = ktime_set(0, DWC2_RETRY_WAIT_DELAY);
>
> so the units are nanoseconds.
>
> Maybe NSEC_PER_MSEC would better indicate the intent here?
Yes, that seems reasonable. I will send a v2.
Cheers,
Nathan