During successive timing-change, resolution detected could be incorrect,
for example. Using remote KVM to do Centos-8.2 installation, the timing
detected could be only 1920x471 for 1920x1200.
Increase min-required-count of stable signal to fix the problem.
Fixes: d2b4387f3bdf ("media: platform: Add Aspeed Video Engine driver")
Signed-off-by: Jammy Huang <[email protected]>
---
drivers/media/platform/aspeed-video.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/media/platform/aspeed-video.c b/drivers/media/platform/aspeed-video.c
index 996afbb87ee9..625a77ddb479 100644
--- a/drivers/media/platform/aspeed-video.c
+++ b/drivers/media/platform/aspeed-video.c
@@ -1208,8 +1208,8 @@ static void aspeed_video_init_regs(struct aspeed_video *video)
aspeed_video_write(video, VE_MODE_DETECT,
FIELD_PREP(VE_MODE_DT_HOR_TOLER, 2) |
FIELD_PREP(VE_MODE_DT_VER_TOLER, 2) |
- FIELD_PREP(VE_MODE_DT_HOR_STABLE, 6) |
- FIELD_PREP(VE_MODE_DT_VER_STABLE, 6) |
+ FIELD_PREP(VE_MODE_DT_HOR_STABLE, 10) |
+ FIELD_PREP(VE_MODE_DT_VER_STABLE, 10) |
FIELD_PREP(VE_MODE_DT_EDG_THROD, 0x65));
aspeed_video_write(video, VE_BCD_CTRL, 0);
--
2.25.1