Hi All,
This patch series add support to get/set drive-strength and
output-impedance for RZ/G2L SoC. Along with some macro renames
and code cleanup.
Cheers,
Prabhakar
Changes for v3:
* Fixed review comments pointed by Geert.
Changes for v2:
* Fixed review comments pointed by Geert, split up patch 4 from series [1]
Note: This patch series is dependent on first two patches of series [1]
[1] https://patchwork.kernel.org/project/linux-renesas-soc/cover/
[email protected]/
Lad Prabhakar (6):
dt-bindings: pinctrl: renesas,rzg2l-pinctrl: Add output-impedance-ohms
property
pinctrl: renesas: pinctrl-rzg2l: Rename RZG2L_SINGLE_PIN_GET_PORT
macro
pinctrl: renesas: pinctrl-rzg2l: Add helper functions to read/write
pin config
pinctrl: renesas: pinctrl-rzg2l: Add support to get/set pin config for
GPIO port pins
pinctrl: renesas: pinctrl-rzg2l: Rename PIN_CFG_* macros to match HW
manual
pinctrl: renesas: pinctrl-rzg2l: Add support to get/set drive-strength
and output-impedance-ohms
.../pinctrl/renesas,rzg2l-pinctrl.yaml | 2 +
drivers/pinctrl/renesas/pinctrl-rzg2l.c | 307 ++++++++++++------
2 files changed, 209 insertions(+), 100 deletions(-)
--
2.17.1
RZ/G2L SoC has two groups of pins, Group-A and Group-B. RZ/G2L SoC supports
configuring Output Impedance for Group-B pins (valid values 33/50/66/100).
Signed-off-by: Lad Prabhakar <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Biju Das <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
---
v2->v3
* Included RB tag
---
.../devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
index ef68dabcf4dc..3a66fd214c17 100644
--- a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml
@@ -73,6 +73,8 @@ additionalProperties:
pins: true
drive-strength:
enum: [ 2, 4, 8, 12 ]
+ output-impedance-ohms:
+ enum: [ 33, 50, 66, 100 ]
power-source:
enum: [ 1800, 2500, 3300 ]
slew-rate: true
--
2.17.1
Rename RZG2L_SINGLE_PIN_GET_PORT -> RZG2L_SINGLE_PIN_GET_PORT_OFFSET.
Also, rename port -> port_offset in rzg2l_pinctrl_pinconf_set/get for
readability.
Signed-off-by: Lad Prabhakar <[email protected]>
Reviewed-by: Biju Das <[email protected]>
---
v2->v3
* New patch
---
drivers/pinctrl/renesas/pinctrl-rzg2l.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/pinctrl/renesas/pinctrl-rzg2l.c b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
index 20b2af889ca9..be9af717a497 100644
--- a/drivers/pinctrl/renesas/pinctrl-rzg2l.c
+++ b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
@@ -77,7 +77,7 @@
#define RZG2L_SINGLE_PIN BIT(31)
#define RZG2L_SINGLE_PIN_PACK(p, b, f) (RZG2L_SINGLE_PIN | \
((p) << 24) | ((b) << 20) | (f))
-#define RZG2L_SINGLE_PIN_GET_PORT(x) (((x) & GENMASK(30, 24)) >> 24)
+#define RZG2L_SINGLE_PIN_GET_PORT_OFFSET(x) (((x) & GENMASK(30, 24)) >> 24)
#define RZG2L_SINGLE_PIN_GET_BIT(x) (((x) & GENMASK(22, 20)) >> 20)
#define RZG2L_SINGLE_PIN_GET_CFGS(x) ((x) & GENMASK(19, 0))
@@ -432,10 +432,10 @@ static int rzg2l_pinctrl_pinconf_get(struct pinctrl_dev *pctldev,
enum pin_config_param param = pinconf_to_config_param(*config);
const struct pinctrl_pin_desc *pin = &pctrl->desc.pins[_pin];
unsigned int *pin_data = pin->drv_data;
+ u32 port_offset = 0, reg;
unsigned int arg = 0;
unsigned long flags;
void __iomem *addr;
- u32 port = 0, reg;
u32 cfg = 0;
u8 bit = 0;
@@ -443,7 +443,7 @@ static int rzg2l_pinctrl_pinconf_get(struct pinctrl_dev *pctldev,
return -EINVAL;
if (*pin_data & RZG2L_SINGLE_PIN) {
- port = RZG2L_SINGLE_PIN_GET_PORT(*pin_data);
+ port_offset = RZG2L_SINGLE_PIN_GET_PORT_OFFSET(*pin_data);
cfg = RZG2L_SINGLE_PIN_GET_CFGS(*pin_data);
bit = RZG2L_SINGLE_PIN_GET_BIT(*pin_data);
}
@@ -454,7 +454,7 @@ static int rzg2l_pinctrl_pinconf_get(struct pinctrl_dev *pctldev,
return -EINVAL;
spin_lock_irqsave(&pctrl->lock, flags);
/* handle _L/_H for 32-bit register read/write */
- addr = pctrl->base + IEN(port);
+ addr = pctrl->base + IEN(port_offset);
if (bit >= 4) {
bit -= 4;
addr += 4;
@@ -502,9 +502,9 @@ static int rzg2l_pinctrl_pinconf_set(struct pinctrl_dev *pctldev,
const struct pinctrl_pin_desc *pin = &pctrl->desc.pins[_pin];
unsigned int *pin_data = pin->drv_data;
enum pin_config_param param;
+ u32 port_offset = 0, reg;
unsigned long flags;
void __iomem *addr;
- u32 port = 0, reg;
unsigned int i;
u32 cfg = 0;
u8 bit = 0;
@@ -513,7 +513,7 @@ static int rzg2l_pinctrl_pinconf_set(struct pinctrl_dev *pctldev,
return -EINVAL;
if (*pin_data & RZG2L_SINGLE_PIN) {
- port = RZG2L_SINGLE_PIN_GET_PORT(*pin_data);
+ port_offset = RZG2L_SINGLE_PIN_GET_PORT_OFFSET(*pin_data);
cfg = RZG2L_SINGLE_PIN_GET_CFGS(*pin_data);
bit = RZG2L_SINGLE_PIN_GET_BIT(*pin_data);
}
@@ -529,7 +529,7 @@ static int rzg2l_pinctrl_pinconf_set(struct pinctrl_dev *pctldev,
return -EINVAL;
/* handle _L/_H for 32-bit register read/write */
- addr = pctrl->base + IEN(port);
+ addr = pctrl->base + IEN(port_offset);
if (bit >= 4) {
bit -= 4;
addr += 4;
--
2.17.1
Add helper functions to read/read modify write pin config.
Switch to use helper functions for pins supporting PIN_CONFIG_INPUT_ENABLE
capabilities.
Signed-off-by: Lad Prabhakar <[email protected]>
Reviewed-by: Biju Das <[email protected]>
---
v2->v3
* Dropped duplicate masking in rzg2l_read_pin_config
* Dropped port_pin flag
* Dropped spinlocks around read/write
---
drivers/pinctrl/renesas/pinctrl-rzg2l.c | 58 +++++++++++++++----------
1 file changed, 34 insertions(+), 24 deletions(-)
diff --git a/drivers/pinctrl/renesas/pinctrl-rzg2l.c b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
index be9af717a497..984c19328efa 100644
--- a/drivers/pinctrl/renesas/pinctrl-rzg2l.c
+++ b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
@@ -424,6 +424,36 @@ static int rzg2l_dt_node_to_map(struct pinctrl_dev *pctldev,
return ret;
}
+static u32 rzg2l_read_pin_config(struct rzg2l_pinctrl *pctrl, u32 offset,
+ u8 bit, u32 mask)
+{
+ void __iomem *addr = pctrl->base + offset;
+
+ /* handle _L/_H for 32-bit register read/write */
+ if (bit >= 4) {
+ bit -= 4;
+ addr += 4;
+ }
+
+ return (readl(addr) >> (bit * 8)) & mask;
+}
+
+static void rzg2l_rmw_pin_config(struct rzg2l_pinctrl *pctrl, u32 offset,
+ u8 bit, u32 mask, u32 val)
+{
+ void __iomem *addr = pctrl->base + offset;
+ u32 reg;
+
+ /* handle _L/_H for 32-bit register read/write */
+ if (bit >= 4) {
+ bit -= 4;
+ addr += 4;
+ }
+
+ reg = readl(addr) & ~(mask << (bit * 8));
+ writel(reg | (val << (bit * 8)), addr);
+}
+
static int rzg2l_pinctrl_pinconf_get(struct pinctrl_dev *pctldev,
unsigned int _pin,
unsigned long *config)
@@ -432,8 +462,8 @@ static int rzg2l_pinctrl_pinconf_get(struct pinctrl_dev *pctldev,
enum pin_config_param param = pinconf_to_config_param(*config);
const struct pinctrl_pin_desc *pin = &pctrl->desc.pins[_pin];
unsigned int *pin_data = pin->drv_data;
- u32 port_offset = 0, reg;
unsigned int arg = 0;
+ u32 port_offset = 0;
unsigned long flags;
void __iomem *addr;
u32 cfg = 0;
@@ -452,17 +482,7 @@ static int rzg2l_pinctrl_pinconf_get(struct pinctrl_dev *pctldev,
case PIN_CONFIG_INPUT_ENABLE:
if (!(cfg & PIN_CFG_IEN))
return -EINVAL;
- spin_lock_irqsave(&pctrl->lock, flags);
- /* handle _L/_H for 32-bit register read/write */
- addr = pctrl->base + IEN(port_offset);
- if (bit >= 4) {
- bit -= 4;
- addr += 4;
- }
-
- reg = readl(addr) & (IEN_MASK << (bit * 8));
- arg = (reg >> (bit * 8)) & 0x1;
- spin_unlock_irqrestore(&pctrl->lock, flags);
+ arg = rzg2l_read_pin_config(pctrl, IEN(port_offset), bit, IEN_MASK);
break;
case PIN_CONFIG_POWER_SOURCE: {
@@ -502,7 +522,7 @@ static int rzg2l_pinctrl_pinconf_set(struct pinctrl_dev *pctldev,
const struct pinctrl_pin_desc *pin = &pctrl->desc.pins[_pin];
unsigned int *pin_data = pin->drv_data;
enum pin_config_param param;
- u32 port_offset = 0, reg;
+ u32 port_offset = 0;
unsigned long flags;
void __iomem *addr;
unsigned int i;
@@ -528,17 +548,7 @@ static int rzg2l_pinctrl_pinconf_set(struct pinctrl_dev *pctldev,
if (!(cfg & PIN_CFG_IEN))
return -EINVAL;
- /* handle _L/_H for 32-bit register read/write */
- addr = pctrl->base + IEN(port_offset);
- if (bit >= 4) {
- bit -= 4;
- addr += 4;
- }
-
- spin_lock_irqsave(&pctrl->lock, flags);
- reg = readl(addr) & ~(IEN_MASK << (bit * 8));
- writel(reg | (arg << (bit * 8)), addr);
- spin_unlock_irqrestore(&pctrl->lock, flags);
+ rzg2l_rmw_pin_config(pctrl, IEN(port_offset), bit, IEN_MASK, !!arg);
break;
}
--
2.17.1
Add support to get/set pin config for GPIO port pins.
Signed-off-by: Lad Prabhakar <[email protected]>
Reviewed-by: Biju Das <[email protected]>
---
v2->v3
* Introduced RZG2L_PIN_ID_TO_PORT_OFFSET
---
drivers/pinctrl/renesas/pinctrl-rzg2l.c | 32 +++++++++++++++++++++++++
1 file changed, 32 insertions(+)
diff --git a/drivers/pinctrl/renesas/pinctrl-rzg2l.c b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
index 984c19328efa..2b8aea40b95f 100644
--- a/drivers/pinctrl/renesas/pinctrl-rzg2l.c
+++ b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
@@ -106,6 +106,7 @@
#define PM_OUTPUT 0x2
#define RZG2L_PIN_ID_TO_PORT(id) ((id) / RZG2L_PINS_PER_PORT)
+#define RZG2L_PIN_ID_TO_PORT_OFFSET(id) (RZG2L_PIN_ID_TO_PORT(id) + 0x10)
#define RZG2L_PIN_ID_TO_PIN(id) ((id) % RZG2L_PINS_PER_PORT)
struct rzg2l_dedicated_configs {
@@ -424,6 +425,23 @@ static int rzg2l_dt_node_to_map(struct pinctrl_dev *pctldev,
return ret;
}
+static int rzg2l_validate_gpio_pin(struct rzg2l_pinctrl *pctrl,
+ u32 cfg, u32 port, u8 bit)
+{
+ u8 pincount = RZG2L_GPIO_PORT_GET_PINCNT(cfg);
+ u32 port_index = RZG2L_GPIO_PORT_GET_INDEX(cfg);
+ u32 data;
+
+ if (bit >= pincount || port >= pctrl->data->n_port_pins)
+ return -EINVAL;
+
+ data = pctrl->data->port_pin_configs[port];
+ if (port_index != RZG2L_GPIO_PORT_GET_INDEX(data))
+ return -EINVAL;
+
+ return 0;
+}
+
static u32 rzg2l_read_pin_config(struct rzg2l_pinctrl *pctrl, u32 offset,
u8 bit, u32 mask)
{
@@ -476,6 +494,13 @@ static int rzg2l_pinctrl_pinconf_get(struct pinctrl_dev *pctldev,
port_offset = RZG2L_SINGLE_PIN_GET_PORT_OFFSET(*pin_data);
cfg = RZG2L_SINGLE_PIN_GET_CFGS(*pin_data);
bit = RZG2L_SINGLE_PIN_GET_BIT(*pin_data);
+ } else {
+ cfg = RZG2L_GPIO_PORT_GET_CFGS(*pin_data);
+ port_offset = RZG2L_PIN_ID_TO_PORT_OFFSET(_pin);
+ bit = RZG2L_PIN_ID_TO_PIN(_pin);
+
+ if (rzg2l_validate_gpio_pin(pctrl, *pin_data, RZG2L_PIN_ID_TO_PORT(_pin), bit))
+ return -EINVAL;
}
switch (param) {
@@ -536,6 +561,13 @@ static int rzg2l_pinctrl_pinconf_set(struct pinctrl_dev *pctldev,
port_offset = RZG2L_SINGLE_PIN_GET_PORT_OFFSET(*pin_data);
cfg = RZG2L_SINGLE_PIN_GET_CFGS(*pin_data);
bit = RZG2L_SINGLE_PIN_GET_BIT(*pin_data);
+ } else {
+ cfg = RZG2L_GPIO_PORT_GET_CFGS(*pin_data);
+ port_offset = RZG2L_PIN_ID_TO_PORT_OFFSET(_pin);
+ bit = RZG2L_PIN_ID_TO_PIN(_pin);
+
+ if (rzg2l_validate_gpio_pin(pctrl, *pin_data, RZG2L_PIN_ID_TO_PORT(_pin), bit))
+ return -EINVAL;
}
for (i = 0; i < num_configs; i++) {
--
2.17.1
Rename the below macros to match the HW manual (Rev.1.00):
PIN_CFG_IOLH_SD0 -> PIN_CFG_IO_VMC_SD0
PIN_CFG_IOLH_SD1 -> PIN_CFG_IO_VMC_SD1
PIN_CFG_IOLH_QSPI -> PIN_CFG_IO_VMC_QSPI
PIN_CFG_IOLH_ETH0 -> PIN_CFG_IO_VMC_ETH0
PIN_CFG_IOLH_ETH1 -> PIN_CFG_IO_VMC_ETH1
Signed-off-by: Lad Prabhakar <[email protected]>
Reviewed-by: Biju Das <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
---
v2->v3
* No Changes
---
drivers/pinctrl/renesas/pinctrl-rzg2l.c | 122 ++++++++++++------------
1 file changed, 61 insertions(+), 61 deletions(-)
diff --git a/drivers/pinctrl/renesas/pinctrl-rzg2l.c b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
index 2b8aea40b95f..b26f878423d6 100644
--- a/drivers/pinctrl/renesas/pinctrl-rzg2l.c
+++ b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
@@ -39,11 +39,11 @@
#define PIN_CFG_SR BIT(1)
#define PIN_CFG_IEN BIT(2)
#define PIN_CFG_PUPD BIT(3)
-#define PIN_CFG_IOLH_SD0 BIT(4)
-#define PIN_CFG_IOLH_SD1 BIT(5)
-#define PIN_CFG_IOLH_QSPI BIT(6)
-#define PIN_CFG_IOLH_ETH0 BIT(7)
-#define PIN_CFG_IOLH_ETH1 BIT(8)
+#define PIN_CFG_IO_VMC_SD0 BIT(4)
+#define PIN_CFG_IO_VMC_SD1 BIT(5)
+#define PIN_CFG_IO_VMC_QSPI BIT(6)
+#define PIN_CFG_IO_VMC_ETH0 BIT(7)
+#define PIN_CFG_IO_VMC_ETH1 BIT(8)
#define PIN_CFG_FILONOFF BIT(9)
#define PIN_CFG_FILNUM BIT(10)
#define PIN_CFG_FILCLKSEL BIT(11)
@@ -513,11 +513,11 @@ static int rzg2l_pinctrl_pinconf_get(struct pinctrl_dev *pctldev,
case PIN_CONFIG_POWER_SOURCE: {
u32 pwr_reg = 0x0;
- if (cfg & PIN_CFG_IOLH_SD0)
+ if (cfg & PIN_CFG_IO_VMC_SD0)
pwr_reg = SD_CH(0);
- else if (cfg & PIN_CFG_IOLH_SD1)
+ else if (cfg & PIN_CFG_IO_VMC_SD1)
pwr_reg = SD_CH(1);
- else if (cfg & PIN_CFG_IOLH_QSPI)
+ else if (cfg & PIN_CFG_IO_VMC_QSPI)
pwr_reg = QSPI;
else
return -EINVAL;
@@ -591,11 +591,11 @@ static int rzg2l_pinctrl_pinconf_set(struct pinctrl_dev *pctldev,
if (mV != 1800 && mV != 3300)
return -EINVAL;
- if (cfg & PIN_CFG_IOLH_SD0)
+ if (cfg & PIN_CFG_IO_VMC_SD0)
pwr_reg = SD_CH(0);
- else if (cfg & PIN_CFG_IOLH_SD1)
+ else if (cfg & PIN_CFG_IO_VMC_SD1)
pwr_reg = SD_CH(1);
- else if (cfg & PIN_CFG_IOLH_QSPI)
+ else if (cfg & PIN_CFG_IO_VMC_QSPI)
pwr_reg = QSPI;
else
return -EINVAL;
@@ -897,24 +897,24 @@ static const u32 rzg2l_gpio_configs[] = {
RZG2L_GPIO_PORT_PACK(3, 0x21, RZG2L_MPXED_PIN_FUNCS),
RZG2L_GPIO_PORT_PACK(2, 0x22, RZG2L_MPXED_PIN_FUNCS),
RZG2L_GPIO_PORT_PACK(2, 0x23, RZG2L_MPXED_PIN_FUNCS),
- RZG2L_GPIO_PORT_PACK(3, 0x24, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IOLH_ETH0)),
- RZG2L_GPIO_PORT_PACK(2, 0x25, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IOLH_ETH0)),
- RZG2L_GPIO_PORT_PACK(2, 0x26, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IOLH_ETH0)),
- RZG2L_GPIO_PORT_PACK(2, 0x27, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IOLH_ETH0)),
- RZG2L_GPIO_PORT_PACK(2, 0x28, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IOLH_ETH0)),
- RZG2L_GPIO_PORT_PACK(2, 0x29, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IOLH_ETH0)),
- RZG2L_GPIO_PORT_PACK(2, 0x2a, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IOLH_ETH0)),
- RZG2L_GPIO_PORT_PACK(2, 0x2b, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IOLH_ETH0)),
- RZG2L_GPIO_PORT_PACK(2, 0x2c, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IOLH_ETH0)),
- RZG2L_GPIO_PORT_PACK(2, 0x2d, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IOLH_ETH1)),
- RZG2L_GPIO_PORT_PACK(2, 0x2e, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IOLH_ETH1)),
- RZG2L_GPIO_PORT_PACK(2, 0x2f, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IOLH_ETH1)),
- RZG2L_GPIO_PORT_PACK(2, 0x30, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IOLH_ETH1)),
- RZG2L_GPIO_PORT_PACK(2, 0x31, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IOLH_ETH1)),
- RZG2L_GPIO_PORT_PACK(2, 0x32, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IOLH_ETH1)),
- RZG2L_GPIO_PORT_PACK(2, 0x33, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IOLH_ETH1)),
- RZG2L_GPIO_PORT_PACK(2, 0x34, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IOLH_ETH1)),
- RZG2L_GPIO_PORT_PACK(3, 0x35, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IOLH_ETH1)),
+ RZG2L_GPIO_PORT_PACK(3, 0x24, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)),
+ RZG2L_GPIO_PORT_PACK(2, 0x25, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)),
+ RZG2L_GPIO_PORT_PACK(2, 0x26, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)),
+ RZG2L_GPIO_PORT_PACK(2, 0x27, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)),
+ RZG2L_GPIO_PORT_PACK(2, 0x28, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)),
+ RZG2L_GPIO_PORT_PACK(2, 0x29, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)),
+ RZG2L_GPIO_PORT_PACK(2, 0x2a, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)),
+ RZG2L_GPIO_PORT_PACK(2, 0x2b, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)),
+ RZG2L_GPIO_PORT_PACK(2, 0x2c, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH0)),
+ RZG2L_GPIO_PORT_PACK(2, 0x2d, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH1)),
+ RZG2L_GPIO_PORT_PACK(2, 0x2e, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH1)),
+ RZG2L_GPIO_PORT_PACK(2, 0x2f, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH1)),
+ RZG2L_GPIO_PORT_PACK(2, 0x30, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH1)),
+ RZG2L_GPIO_PORT_PACK(2, 0x31, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH1)),
+ RZG2L_GPIO_PORT_PACK(2, 0x32, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH1)),
+ RZG2L_GPIO_PORT_PACK(2, 0x33, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH1)),
+ RZG2L_GPIO_PORT_PACK(2, 0x34, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH1)),
+ RZG2L_GPIO_PORT_PACK(3, 0x35, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IO_VMC_ETH1)),
RZG2L_GPIO_PORT_PACK(2, 0x36, RZG2L_MPXED_PIN_FUNCS),
RZG2L_GPIO_PORT_PACK(3, 0x37, RZG2L_MPXED_PIN_FUNCS),
RZG2L_GPIO_PORT_PACK(3, 0x38, RZG2L_MPXED_PIN_FUNCS),
@@ -938,68 +938,68 @@ static struct rzg2l_dedicated_configs rzg2l_dedicated_pins[] = {
{ "AUDIO_CLK1", RZG2L_SINGLE_PIN_PACK(0x4, 0, PIN_CFG_IEN) },
{ "AUDIO_CLK2", RZG2L_SINGLE_PIN_PACK(0x4, 1, PIN_CFG_IEN) },
{ "SD0_CLK", RZG2L_SINGLE_PIN_PACK(0x6, 0,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IOLH_SD0)) },
+ (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IO_VMC_SD0)) },
{ "SD0_CMD", RZG2L_SINGLE_PIN_PACK(0x6, 1,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IOLH_SD0)) },
+ (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IO_VMC_SD0)) },
{ "SD0_RST#", RZG2L_SINGLE_PIN_PACK(0x6, 2,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IOLH_SD0)) },
+ (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IO_VMC_SD0)) },
{ "SD0_DATA0", RZG2L_SINGLE_PIN_PACK(0x7, 0,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IOLH_SD0)) },
+ (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IO_VMC_SD0)) },
{ "SD0_DATA1", RZG2L_SINGLE_PIN_PACK(0x7, 1,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IOLH_SD0)) },
+ (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IO_VMC_SD0)) },
{ "SD0_DATA2", RZG2L_SINGLE_PIN_PACK(0x7, 2,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IOLH_SD0)) },
+ (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IO_VMC_SD0)) },
{ "SD0_DATA3", RZG2L_SINGLE_PIN_PACK(0x7, 3,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IOLH_SD0)) },
+ (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IO_VMC_SD0)) },
{ "SD0_DATA4", RZG2L_SINGLE_PIN_PACK(0x7, 4,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IOLH_SD0)) },
+ (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IO_VMC_SD0)) },
{ "SD0_DATA5", RZG2L_SINGLE_PIN_PACK(0x7, 5,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IOLH_SD0)) },
+ (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IO_VMC_SD0)) },
{ "SD0_DATA6", RZG2L_SINGLE_PIN_PACK(0x7, 6,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IOLH_SD0)) },
+ (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IO_VMC_SD0)) },
{ "SD0_DATA7", RZG2L_SINGLE_PIN_PACK(0x7, 7,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IOLH_SD0)) },
+ (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IO_VMC_SD0)) },
{ "SD1_CLK", RZG2L_SINGLE_PIN_PACK(0x8, 0,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IOLH_SD1))},
+ (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IO_VMC_SD1))},
{ "SD1_CMD", RZG2L_SINGLE_PIN_PACK(0x8, 1,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IOLH_SD1)) },
+ (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IO_VMC_SD1)) },
{ "SD1_DATA0", RZG2L_SINGLE_PIN_PACK(0x9, 0,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IOLH_SD1)) },
+ (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IO_VMC_SD1)) },
{ "SD1_DATA1", RZG2L_SINGLE_PIN_PACK(0x9, 1,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IOLH_SD1)) },
+ (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IO_VMC_SD1)) },
{ "SD1_DATA2", RZG2L_SINGLE_PIN_PACK(0x9, 2,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IOLH_SD1)) },
+ (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IO_VMC_SD1)) },
{ "SD1_DATA3", RZG2L_SINGLE_PIN_PACK(0x9, 3,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IOLH_SD1)) },
+ (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IO_VMC_SD1)) },
{ "QSPI0_SPCLK", RZG2L_SINGLE_PIN_PACK(0xa, 0,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IOLH_QSPI)) },
+ (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IO_VMC_QSPI)) },
{ "QSPI0_IO0", RZG2L_SINGLE_PIN_PACK(0xa, 1,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IOLH_QSPI)) },
+ (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IO_VMC_QSPI)) },
{ "QSPI0_IO1", RZG2L_SINGLE_PIN_PACK(0xa, 2,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IOLH_QSPI)) },
+ (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IO_VMC_QSPI)) },
{ "QSPI0_IO2", RZG2L_SINGLE_PIN_PACK(0xa, 3,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IOLH_QSPI)) },
+ (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IO_VMC_QSPI)) },
{ "QSPI0_IO3", RZG2L_SINGLE_PIN_PACK(0xa, 4,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IOLH_QSPI)) },
+ (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IO_VMC_QSPI)) },
{ "QSPI0_SSL", RZG2L_SINGLE_PIN_PACK(0xa, 5,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IOLH_QSPI)) },
+ (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IO_VMC_QSPI)) },
{ "QSPI1_SPCLK", RZG2L_SINGLE_PIN_PACK(0xb, 0,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IOLH_QSPI)) },
+ (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IO_VMC_QSPI)) },
{ "QSPI1_IO0", RZG2L_SINGLE_PIN_PACK(0xb, 1,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IOLH_QSPI)) },
+ (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IO_VMC_QSPI)) },
{ "QSPI1_IO1", RZG2L_SINGLE_PIN_PACK(0xb, 2,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IOLH_QSPI)) },
+ (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IO_VMC_QSPI)) },
{ "QSPI1_IO2", RZG2L_SINGLE_PIN_PACK(0xb, 3,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IOLH_QSPI)) },
+ (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IO_VMC_QSPI)) },
{ "QSPI1_IO3", RZG2L_SINGLE_PIN_PACK(0xb, 4,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IOLH_QSPI)) },
+ (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IO_VMC_QSPI)) },
{ "QSPI1_SSL", RZG2L_SINGLE_PIN_PACK(0xb, 5,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IOLH_QSPI)) },
+ (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IO_VMC_QSPI)) },
{ "QSPI_RESET#", RZG2L_SINGLE_PIN_PACK(0xc, 0,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IOLH_QSPI)) },
+ (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IO_VMC_QSPI)) },
{ "QSPI_WP#", RZG2L_SINGLE_PIN_PACK(0xc, 1,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IOLH_QSPI)) },
- { "QSPI_INT#", RZG2L_SINGLE_PIN_PACK(0xc, 2, (PIN_CFG_SR | PIN_CFG_IOLH_QSPI)) },
+ (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IO_VMC_QSPI)) },
+ { "QSPI_INT#", RZG2L_SINGLE_PIN_PACK(0xc, 2, (PIN_CFG_SR | PIN_CFG_IO_VMC_QSPI)) },
{ "WDTOVF_PERROUT#", RZG2L_SINGLE_PIN_PACK(0xd, 0, (PIN_CFG_IOLH | PIN_CFG_SR)) },
{ "RIIC0_SDA", RZG2L_SINGLE_PIN_PACK(0xe, 0, PIN_CFG_IEN) },
{ "RIIC0_SCL", RZG2L_SINGLE_PIN_PACK(0xe, 1, PIN_CFG_IEN) },
--
2.17.1
RZ/G2L supports two groups of pins Group-A and Group-B. For Group-A
pins drive-strength can be configured and for Group-B output-impedance
can be configured.
This patch splits PIN_CFG_IOLH macro to PIN_CFG_IOLH_A/B and adds
support to get/set drive-strength and output-impedance-ohms for the
supported pins.
Signed-off-by: Lad Prabhakar <[email protected]>
Reviewed-by: Biju Das <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
---
v2->v3
* Dropped port_pin flag
* Included RB tag
---
drivers/pinctrl/renesas/pinctrl-rzg2l.c | 161 +++++++++++++++++-------
1 file changed, 113 insertions(+), 48 deletions(-)
diff --git a/drivers/pinctrl/renesas/pinctrl-rzg2l.c b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
index b26f878423d6..a589efa46e7d 100644
--- a/drivers/pinctrl/renesas/pinctrl-rzg2l.c
+++ b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
@@ -35,20 +35,21 @@
#define MUX_FUNC(pinconf) (((pinconf) & MUX_FUNC_MASK) >> MUX_FUNC_OFFS)
/* PIN capabilities */
-#define PIN_CFG_IOLH BIT(0)
-#define PIN_CFG_SR BIT(1)
-#define PIN_CFG_IEN BIT(2)
-#define PIN_CFG_PUPD BIT(3)
-#define PIN_CFG_IO_VMC_SD0 BIT(4)
-#define PIN_CFG_IO_VMC_SD1 BIT(5)
-#define PIN_CFG_IO_VMC_QSPI BIT(6)
-#define PIN_CFG_IO_VMC_ETH0 BIT(7)
-#define PIN_CFG_IO_VMC_ETH1 BIT(8)
-#define PIN_CFG_FILONOFF BIT(9)
-#define PIN_CFG_FILNUM BIT(10)
-#define PIN_CFG_FILCLKSEL BIT(11)
-
-#define RZG2L_MPXED_PIN_FUNCS (PIN_CFG_IOLH | \
+#define PIN_CFG_IOLH_A BIT(0)
+#define PIN_CFG_IOLH_B BIT(1)
+#define PIN_CFG_SR BIT(2)
+#define PIN_CFG_IEN BIT(3)
+#define PIN_CFG_PUPD BIT(4)
+#define PIN_CFG_IO_VMC_SD0 BIT(5)
+#define PIN_CFG_IO_VMC_SD1 BIT(6)
+#define PIN_CFG_IO_VMC_QSPI BIT(7)
+#define PIN_CFG_IO_VMC_ETH0 BIT(8)
+#define PIN_CFG_IO_VMC_ETH1 BIT(9)
+#define PIN_CFG_FILONOFF BIT(10)
+#define PIN_CFG_FILNUM BIT(11)
+#define PIN_CFG_FILCLKSEL BIT(12)
+
+#define RZG2L_MPXED_PIN_FUNCS (PIN_CFG_IOLH_A | \
PIN_CFG_SR | \
PIN_CFG_PUPD | \
PIN_CFG_FILONOFF | \
@@ -86,6 +87,7 @@
#define PMC(n) (0x0200 + 0x10 + (n))
#define PFC(n) (0x0400 + 0x40 + (n) * 4)
#define PIN(n) (0x0800 + 0x10 + (n))
+#define IOLH(n) (0x1000 + (n) * 8)
#define IEN(n) (0x1800 + (n) * 8)
#define PWPR (0x3014)
#define SD_CH(n) (0x3000 + (n) * 4)
@@ -101,6 +103,7 @@
#define PVDD_MASK 0x01
#define PFC_MASK 0x07
#define IEN_MASK 0x01
+#define IOLH_MASK 0x03
#define PM_INPUT 0x1
#define PM_OUTPUT 0x2
@@ -138,6 +141,9 @@ struct rzg2l_pinctrl {
spinlock_t lock;
};
+static const unsigned int iolh_groupa_mA[] = { 2, 4, 8, 12 };
+static const unsigned int iolh_groupb_oi[] = { 100, 66, 50, 33 };
+
static void rzg2l_pinctrl_set_pfc_mode(struct rzg2l_pinctrl *pctrl,
u8 port, u8 pin, u8 func)
{
@@ -529,6 +535,28 @@ static int rzg2l_pinctrl_pinconf_get(struct pinctrl_dev *pctldev,
break;
}
+ case PIN_CONFIG_DRIVE_STRENGTH: {
+ unsigned int index;
+
+ if (!(cfg & PIN_CFG_IOLH_A))
+ return -EINVAL;
+
+ index = rzg2l_read_pin_config(pctrl, IOLH(port_offset), bit, IOLH_MASK);
+ arg = iolh_groupa_mA[index];
+ break;
+ }
+
+ case PIN_CONFIG_OUTPUT_IMPEDANCE_OHMS: {
+ unsigned int index;
+
+ if (!(cfg & PIN_CFG_IOLH_B))
+ return -EINVAL;
+
+ index = rzg2l_read_pin_config(pctrl, IOLH(port_offset), bit, IOLH_MASK);
+ arg = iolh_groupb_oi[index];
+ break;
+ }
+
default:
return -ENOTSUPP;
}
@@ -606,6 +634,43 @@ static int rzg2l_pinctrl_pinconf_set(struct pinctrl_dev *pctldev,
spin_unlock_irqrestore(&pctrl->lock, flags);
break;
}
+
+ case PIN_CONFIG_DRIVE_STRENGTH: {
+ unsigned int arg = pinconf_to_config_argument(_configs[i]);
+ unsigned int index;
+
+ if (!(cfg & PIN_CFG_IOLH_A))
+ return -EINVAL;
+
+ for (index = 0; index < ARRAY_SIZE(iolh_groupa_mA); index++) {
+ if (arg == iolh_groupa_mA[index])
+ break;
+ }
+ if (index >= ARRAY_SIZE(iolh_groupa_mA))
+ return -EINVAL;
+
+ rzg2l_rmw_pin_config(pctrl, IOLH(port_offset), bit, IOLH_MASK, index);
+ break;
+ }
+
+ case PIN_CONFIG_OUTPUT_IMPEDANCE_OHMS: {
+ unsigned int arg = pinconf_to_config_argument(_configs[i]);
+ unsigned int index;
+
+ if (!(cfg & PIN_CFG_IOLH_B))
+ return -EINVAL;
+
+ for (index = 0; index < ARRAY_SIZE(iolh_groupb_oi); index++) {
+ if (arg == iolh_groupb_oi[index])
+ break;
+ }
+ if (index >= ARRAY_SIZE(iolh_groupb_oi))
+ return -EINVAL;
+
+ rzg2l_rmw_pin_config(pctrl, IOLH(port_offset), bit, IOLH_MASK, index);
+ break;
+ }
+
default:
return -EOPNOTSUPP;
}
@@ -932,75 +997,75 @@ static struct rzg2l_dedicated_configs rzg2l_dedicated_pins[] = {
{ "NMI", RZG2L_SINGLE_PIN_PACK(0x1, 0,
(PIN_CFG_FILONOFF | PIN_CFG_FILNUM | PIN_CFG_FILCLKSEL)) },
{ "TMS/SWDIO", RZG2L_SINGLE_PIN_PACK(0x2, 0,
- (PIN_CFG_SR | PIN_CFG_IOLH | PIN_CFG_IEN)) },
+ (PIN_CFG_SR | PIN_CFG_IOLH_A | PIN_CFG_IEN)) },
{ "TDO", RZG2L_SINGLE_PIN_PACK(0x3, 0,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IEN)) },
+ (PIN_CFG_IOLH_A | PIN_CFG_SR | PIN_CFG_IEN)) },
{ "AUDIO_CLK1", RZG2L_SINGLE_PIN_PACK(0x4, 0, PIN_CFG_IEN) },
{ "AUDIO_CLK2", RZG2L_SINGLE_PIN_PACK(0x4, 1, PIN_CFG_IEN) },
{ "SD0_CLK", RZG2L_SINGLE_PIN_PACK(0x6, 0,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IO_VMC_SD0)) },
+ (PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_IO_VMC_SD0)) },
{ "SD0_CMD", RZG2L_SINGLE_PIN_PACK(0x6, 1,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IO_VMC_SD0)) },
+ (PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IO_VMC_SD0)) },
{ "SD0_RST#", RZG2L_SINGLE_PIN_PACK(0x6, 2,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IO_VMC_SD0)) },
+ (PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_IO_VMC_SD0)) },
{ "SD0_DATA0", RZG2L_SINGLE_PIN_PACK(0x7, 0,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IO_VMC_SD0)) },
+ (PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IO_VMC_SD0)) },
{ "SD0_DATA1", RZG2L_SINGLE_PIN_PACK(0x7, 1,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IO_VMC_SD0)) },
+ (PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IO_VMC_SD0)) },
{ "SD0_DATA2", RZG2L_SINGLE_PIN_PACK(0x7, 2,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IO_VMC_SD0)) },
+ (PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IO_VMC_SD0)) },
{ "SD0_DATA3", RZG2L_SINGLE_PIN_PACK(0x7, 3,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IO_VMC_SD0)) },
+ (PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IO_VMC_SD0)) },
{ "SD0_DATA4", RZG2L_SINGLE_PIN_PACK(0x7, 4,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IO_VMC_SD0)) },
+ (PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IO_VMC_SD0)) },
{ "SD0_DATA5", RZG2L_SINGLE_PIN_PACK(0x7, 5,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IO_VMC_SD0)) },
+ (PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IO_VMC_SD0)) },
{ "SD0_DATA6", RZG2L_SINGLE_PIN_PACK(0x7, 6,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IO_VMC_SD0)) },
+ (PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IO_VMC_SD0)) },
{ "SD0_DATA7", RZG2L_SINGLE_PIN_PACK(0x7, 7,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IO_VMC_SD0)) },
+ (PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IO_VMC_SD0)) },
{ "SD1_CLK", RZG2L_SINGLE_PIN_PACK(0x8, 0,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IO_VMC_SD1))},
+ (PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_IO_VMC_SD1)) },
{ "SD1_CMD", RZG2L_SINGLE_PIN_PACK(0x8, 1,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IO_VMC_SD1)) },
+ (PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IO_VMC_SD1)) },
{ "SD1_DATA0", RZG2L_SINGLE_PIN_PACK(0x9, 0,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IO_VMC_SD1)) },
+ (PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IO_VMC_SD1)) },
{ "SD1_DATA1", RZG2L_SINGLE_PIN_PACK(0x9, 1,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IO_VMC_SD1)) },
+ (PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IO_VMC_SD1)) },
{ "SD1_DATA2", RZG2L_SINGLE_PIN_PACK(0x9, 2,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IO_VMC_SD1)) },
+ (PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IO_VMC_SD1)) },
{ "SD1_DATA3", RZG2L_SINGLE_PIN_PACK(0x9, 3,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IO_VMC_SD1)) },
+ (PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IO_VMC_SD1)) },
{ "QSPI0_SPCLK", RZG2L_SINGLE_PIN_PACK(0xa, 0,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IO_VMC_QSPI)) },
+ (PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_IO_VMC_QSPI)) },
{ "QSPI0_IO0", RZG2L_SINGLE_PIN_PACK(0xa, 1,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IO_VMC_QSPI)) },
+ (PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_IO_VMC_QSPI)) },
{ "QSPI0_IO1", RZG2L_SINGLE_PIN_PACK(0xa, 2,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IO_VMC_QSPI)) },
+ (PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_IO_VMC_QSPI)) },
{ "QSPI0_IO2", RZG2L_SINGLE_PIN_PACK(0xa, 3,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IO_VMC_QSPI)) },
+ (PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_IO_VMC_QSPI)) },
{ "QSPI0_IO3", RZG2L_SINGLE_PIN_PACK(0xa, 4,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IO_VMC_QSPI)) },
+ (PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_IO_VMC_QSPI)) },
{ "QSPI0_SSL", RZG2L_SINGLE_PIN_PACK(0xa, 5,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IO_VMC_QSPI)) },
+ (PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_IO_VMC_QSPI)) },
{ "QSPI1_SPCLK", RZG2L_SINGLE_PIN_PACK(0xb, 0,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IO_VMC_QSPI)) },
+ (PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_IO_VMC_QSPI)) },
{ "QSPI1_IO0", RZG2L_SINGLE_PIN_PACK(0xb, 1,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IO_VMC_QSPI)) },
+ (PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_IO_VMC_QSPI)) },
{ "QSPI1_IO1", RZG2L_SINGLE_PIN_PACK(0xb, 2,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IO_VMC_QSPI)) },
+ (PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_IO_VMC_QSPI)) },
{ "QSPI1_IO2", RZG2L_SINGLE_PIN_PACK(0xb, 3,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IO_VMC_QSPI)) },
+ (PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_IO_VMC_QSPI)) },
{ "QSPI1_IO3", RZG2L_SINGLE_PIN_PACK(0xb, 4,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IO_VMC_QSPI)) },
+ (PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_IO_VMC_QSPI)) },
{ "QSPI1_SSL", RZG2L_SINGLE_PIN_PACK(0xb, 5,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IO_VMC_QSPI)) },
+ (PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_IO_VMC_QSPI)) },
{ "QSPI_RESET#", RZG2L_SINGLE_PIN_PACK(0xc, 0,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IO_VMC_QSPI)) },
+ (PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_IO_VMC_QSPI)) },
{ "QSPI_WP#", RZG2L_SINGLE_PIN_PACK(0xc, 1,
- (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IO_VMC_QSPI)) },
+ (PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_IO_VMC_QSPI)) },
{ "QSPI_INT#", RZG2L_SINGLE_PIN_PACK(0xc, 2, (PIN_CFG_SR | PIN_CFG_IO_VMC_QSPI)) },
- { "WDTOVF_PERROUT#", RZG2L_SINGLE_PIN_PACK(0xd, 0, (PIN_CFG_IOLH | PIN_CFG_SR)) },
+ { "WDTOVF_PERROUT#", RZG2L_SINGLE_PIN_PACK(0xd, 0, (PIN_CFG_IOLH_A | PIN_CFG_SR)) },
{ "RIIC0_SDA", RZG2L_SINGLE_PIN_PACK(0xe, 0, PIN_CFG_IEN) },
{ "RIIC0_SCL", RZG2L_SINGLE_PIN_PACK(0xe, 1, PIN_CFG_IEN) },
{ "RIIC1_SDA", RZG2L_SINGLE_PIN_PACK(0xe, 2, PIN_CFG_IEN) },
--
2.17.1
On Wed, Nov 10, 2021 at 11:46 PM Lad Prabhakar
<[email protected]> wrote:
> Rename RZG2L_SINGLE_PIN_GET_PORT -> RZG2L_SINGLE_PIN_GET_PORT_OFFSET.
>
> Also, rename port -> port_offset in rzg2l_pinctrl_pinconf_set/get for
> readability.
>
> Signed-off-by: Lad Prabhakar <[email protected]>
> Reviewed-by: Biju Das <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
i.e. will queue in renesas-pinctrl-for-v5.17.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
Hi Prabhakar,
On Wed, Nov 10, 2021 at 11:46 PM Lad Prabhakar
<[email protected]> wrote:
> Add helper functions to read/read modify write pin config.
>
> Switch to use helper functions for pins supporting PIN_CONFIG_INPUT_ENABLE
> capabilities.
>
> Signed-off-by: Lad Prabhakar <[email protected]>
> Reviewed-by: Biju Das <[email protected]>
> ---
> v2->v3
> * Dropped duplicate masking in rzg2l_read_pin_config
> * Dropped port_pin flag
> * Dropped spinlocks around read/write
You do need the spinlock in the read-modify-write case.
No worries, I'll add it back while applying.
Reviewed-by: Geert Uytterhoeven <[email protected]>
i.e. will queue in renesas-pinctrl-for-v5.17.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
On Wed, Nov 10, 2021 at 11:46 PM Lad Prabhakar
<[email protected]> wrote:
> Add support to get/set pin config for GPIO port pins.
>
> Signed-off-by: Lad Prabhakar <[email protected]>
> Reviewed-by: Biju Das <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
i.e. will queue in renesas-pinctrl-for-v5.17.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
Hi Prabhakar,
On Wed, Nov 10, 2021 at 11:46 PM Lad Prabhakar
<[email protected]> wrote:
> This patch series add support to get/set drive-strength and
> output-impedance for RZ/G2L SoC. Along with some macro renames
> and code cleanup.
>
> Cheers,
> Prabhakar
>
> Changes for v3:
> * Fixed review comments pointed by Geert.
>
> Changes for v2:
> * Fixed review comments pointed by Geert, split up patch 4 from series [1]
>
> Note: This patch series is dependent on first two patches of series [1]
>
> [1] https://patchwork.kernel.org/project/linux-renesas-soc/cover/
> [email protected]/
Thank you, will queue in renesas-pinctrl-for-v5.17 with the dependencies.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
Hi Geert,
Thank you for the review.
On Fri, Nov 12, 2021 at 2:06 PM Geert Uytterhoeven <[email protected]> wrote:
>
> Hi Prabhakar,
>
> On Wed, Nov 10, 2021 at 11:46 PM Lad Prabhakar
> <[email protected]> wrote:
> > Add helper functions to read/read modify write pin config.
> >
> > Switch to use helper functions for pins supporting PIN_CONFIG_INPUT_ENABLE
> > capabilities.
> >
> > Signed-off-by: Lad Prabhakar <[email protected]>
> > Reviewed-by: Biju Das <[email protected]>
> > ---
> > v2->v3
> > * Dropped duplicate masking in rzg2l_read_pin_config
> > * Dropped port_pin flag
> > * Dropped spinlocks around read/write
>
> You do need the spinlock in the read-modify-write case.
>
Ouch I mistook your comment of dropping the lock entirely!
> No worries, I'll add it back while applying.
>
Thank you.
Cheers,
Prabhakar
> Reviewed-by: Geert Uytterhoeven <[email protected]>
> i.e. will queue in renesas-pinctrl-for-v5.17.
>
> Gr{oetje,eeting}s,
>
> Geert
>
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]
>
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like that.
> -- Linus Torvalds
Hi Geert,
On Fri, Nov 12, 2021 at 2:09 PM Geert Uytterhoeven <[email protected]> wrote:
>
> Hi Prabhakar,
>
> On Wed, Nov 10, 2021 at 11:46 PM Lad Prabhakar
> <[email protected]> wrote:
> > This patch series add support to get/set drive-strength and
> > output-impedance for RZ/G2L SoC. Along with some macro renames
> > and code cleanup.
> >
> > Cheers,
> > Prabhakar
> >
> > Changes for v3:
> > * Fixed review comments pointed by Geert.
> >
> > Changes for v2:
> > * Fixed review comments pointed by Geert, split up patch 4 from series [1]
> >
> > Note: This patch series is dependent on first two patches of series [1]
> >
> > [1] https://patchwork.kernel.org/project/linux-renesas-soc/cover/
> > [email protected]/
>
> Thank you, will queue in renesas-pinctrl-for-v5.17 with the dependencies.
>
Thank you for the review and acceptance.
Cheers,
Prabhakar
> Gr{oetje,eeting}s,
>
> Geert
>
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]
>
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like that.
> -- Linus Torvalds