Some accumulated ls1028a dts changes from the SDK. Also included two
binding updates needed for these dts changes.
Alex Marginean (1):
arm64: dts: ls1028a-qds: add overlays for various serdes protocols
Biwen Li (4):
arm64: dts: ls1028a: add ftm_alarm1 node to be used as wakeup source
arm64: dts: ls1028a: add flextimer based pwm nodes
arm64: dts: ls1028a-rdb: enable pwm0
arm64: dts: ls1028a-qds: move rtc node to the correct i2c bus
Li Yang (2):
dt-bindings: pci: layerscape-pci: define aer/pme interrupts
arm64: dts: ls1028a-rdb: reorder nodes to be alphabetic
Sahil Malhotra (1):
arm64: dts: ls1028a-qds: enable optee node
Vabhav Sharma (1):
arm64: dts: ls1028a-qds: enable lpuart1
Xiaowei Bao (2):
dt-bindings: pci: layerscape-pci: Add EP mode compatible strings for
ls1028a
arm64: dts: ls1028a: Add PCIe EP nodes
.../bindings/pci/layerscape-pci.txt | 15 +-
arch/arm64/boot/dts/freescale/Makefile | 16 +++
.../dts/freescale/fsl-ls1028a-qds-13bb.dts | 113 +++++++++++++++
.../dts/freescale/fsl-ls1028a-qds-65bb.dts | 108 +++++++++++++++
.../dts/freescale/fsl-ls1028a-qds-7777.dts | 82 +++++++++++
.../dts/freescale/fsl-ls1028a-qds-85bb.dts | 107 ++++++++++++++
.../dts/freescale/fsl-ls1028a-qds-899b.dts | 75 ++++++++++
.../dts/freescale/fsl-ls1028a-qds-9999.dts | 79 +++++++++++
.../boot/dts/freescale/fsl-ls1028a-qds.dts | 43 ++++--
.../boot/dts/freescale/fsl-ls1028a-rdb.dts | 102 +++++++-------
.../arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 130 +++++++++++++++++-
11 files changed, 809 insertions(+), 61 deletions(-)
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-13bb.dts
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-65bb.dts
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-7777.dts
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-85bb.dts
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-899b.dts
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-9999.dts
--
2.25.1
From: Xiaowei Bao <[email protected]>
Add EP mode compatible string for ls1028a.
Signed-off-by: Xiaowei Bao <[email protected]>
Signed-off-by: Hou Zhiqiang <[email protected]>
Signed-off-by: Li Yang <[email protected]>
---
Documentation/devicetree/bindings/pci/layerscape-pci.txt | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/pci/layerscape-pci.txt b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
index f36efa73a470..0d3d78aebe26 100644
--- a/Documentation/devicetree/bindings/pci/layerscape-pci.txt
+++ b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
@@ -23,6 +23,7 @@ Required properties:
"fsl,ls1012a-pcie"
"fsl,ls1028a-pcie"
EP mode:
+ "fsl,ls1028a-pcie-ep", "fsl,ls-pcie-ep"
"fsl,ls1046a-pcie-ep", "fsl,ls-pcie-ep"
"fsl,ls1088a-pcie-ep", "fsl,ls-pcie-ep"
"fsl,ls2088a-pcie-ep", "fsl,ls-pcie-ep"
--
2.25.1
From: Xiaowei Bao <[email protected]>
Add PCIe EP nodes for ls1028a to support EP mode.
Signed-off-by: Xiaowei Bao <[email protected]>
Signed-off-by: Li Yang <[email protected]>
---
.../arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 24 +++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index 06b36cc65865..424dc9e5c4e4 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -642,6 +642,18 @@ pcie1: pcie@3400000 {
status = "disabled";
};
+ pcie_ep1: pcie_ep@3400000 {
+ compatible = "fsl,ls1028a-pcie-ep","fsl,ls-pcie-ep";
+ reg = <0x00 0x03400000 0x0 0x00100000
+ 0x80 0x00000000 0x8 0x00000000>;
+ reg-names = "regs", "addr_space";
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */
+ interrupt-names = "pme";
+ num-ib-windows = <6>;
+ num-ob-windows = <8>;
+ status = "disabled";
+ };
+
pcie2: pcie@3500000 {
compatible = "fsl,ls1028a-pcie";
reg = <0x00 0x03500000 0x0 0x00100000>, /* controller registers */
@@ -669,6 +681,18 @@ pcie2: pcie@3500000 {
status = "disabled";
};
+ pcie_ep2: pcie_ep@3500000 {
+ compatible = "fsl,ls1028a-pcie-ep","fsl,ls-pcie-ep";
+ reg = <0x00 0x03500000 0x0 0x00100000
+ 0x88 0x00000000 0x8 0x00000000>;
+ reg-names = "regs", "addr_space";
+ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */
+ interrupt-names = "pme";
+ num-ib-windows = <6>;
+ num-ob-windows = <8>;
+ status = "disabled";
+ };
+
smmu: iommu@5000000 {
compatible = "arm,mmu-500";
reg = <0 0x5000000 0 0x800000>;
--
2.25.1
From: Biwen Li <[email protected]>
Add pwm nodes using flextimer controller.
Signed-off-by: Biwen Li <[email protected]>
Signed-off-by: Li Yang <[email protected]>
---
.../arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 95 +++++++++++++++++++
1 file changed, 95 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index 51d165440ce9..bdd36a2dcb98 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -66,6 +66,13 @@ CPU_PW20: cpu-pw20 {
};
};
+ rtc_clk: rtc-clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "rtc_clk";
+ };
+
sysclk: sysclk {
compatible = "fixed-clock";
#clock-cells = <0>;
@@ -1148,6 +1155,94 @@ ierb@1f0800000 {
reg = <0x01 0xf0800000 0x0 0x10000>;
};
+ pwm0: pwm@2800000 {
+ compatible = "fsl,vf610-ftm-pwm";
+ #pwm-cells = <3>;
+ reg = <0x0 0x2800000 0x0 0x10000>;
+ clock-names = "ftm_sys", "ftm_ext",
+ "ftm_fix", "ftm_cnt_clk_en";
+ clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+ <&rtc_clk>, <&clockgen 4 1>;
+ status = "disabled";
+ };
+
+ pwm1: pwm@2810000 {
+ compatible = "fsl,vf610-ftm-pwm";
+ #pwm-cells = <3>;
+ reg = <0x0 0x2810000 0x0 0x10000>;
+ clock-names = "ftm_sys", "ftm_ext",
+ "ftm_fix", "ftm_cnt_clk_en";
+ clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+ <&rtc_clk>, <&clockgen 4 1>;
+ status = "disabled";
+ };
+
+ pwm2: pwm@2820000 {
+ compatible = "fsl,vf610-ftm-pwm";
+ #pwm-cells = <3>;
+ reg = <0x0 0x2820000 0x0 0x10000>;
+ clock-names = "ftm_sys", "ftm_ext",
+ "ftm_fix", "ftm_cnt_clk_en";
+ clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+ <&rtc_clk>, <&clockgen 4 1>;
+ status = "disabled";
+ };
+
+ pwm3: pwm@2830000 {
+ compatible = "fsl,vf610-ftm-pwm";
+ #pwm-cells = <3>;
+ reg = <0x0 0x2830000 0x0 0x10000>;
+ clock-names = "ftm_sys", "ftm_ext",
+ "ftm_fix", "ftm_cnt_clk_en";
+ clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+ <&rtc_clk>, <&clockgen 4 1>;
+ status = "disabled";
+ };
+
+ pwm4: pwm@2840000 {
+ compatible = "fsl,vf610-ftm-pwm";
+ #pwm-cells = <3>;
+ reg = <0x0 0x2840000 0x0 0x10000>;
+ clock-names = "ftm_sys", "ftm_ext",
+ "ftm_fix", "ftm_cnt_clk_en";
+ clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+ <&rtc_clk>, <&clockgen 4 1>;
+ status = "disabled";
+ };
+
+ pwm5: pwm@2850000 {
+ compatible = "fsl,vf610-ftm-pwm";
+ #pwm-cells = <3>;
+ reg = <0x0 0x2850000 0x0 0x10000>;
+ clock-names = "ftm_sys", "ftm_ext",
+ "ftm_fix", "ftm_cnt_clk_en";
+ clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+ <&rtc_clk>, <&clockgen 4 1>;
+ status = "disabled";
+ };
+
+ pwm6: pwm@2860000 {
+ compatible = "fsl,vf610-ftm-pwm";
+ #pwm-cells = <3>;
+ reg = <0x0 0x2860000 0x0 0x10000>;
+ clock-names = "ftm_sys", "ftm_ext",
+ "ftm_fix", "ftm_cnt_clk_en";
+ clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+ <&rtc_clk>, <&clockgen 4 1>;
+ status = "disabled";
+ };
+
+ pwm7: pwm@2870000 {
+ compatible = "fsl,vf610-ftm-pwm";
+ #pwm-cells = <3>;
+ reg = <0x0 0x2870000 0x0 0x10000>;
+ clock-names = "ftm_sys", "ftm_ext",
+ "ftm_fix", "ftm_cnt_clk_en";
+ clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+ <&rtc_clk>, <&clockgen 4 1>;
+ status = "disabled";
+ };
+
rcpm: power-controller@1e34040 {
compatible = "fsl,ls1028a-rcpm", "fsl,qoriq-rcpm-2.1+";
reg = <0x0 0x1e34040 0x0 0x1c>;
--
2.25.1
Some platforms using this controller have separated interrupt lines for
aer or pme events instead of having a single interrupt line for
miscellaneous events. Define interrupts in the binding for these
interrupt lines.
Signed-off-by: Li Yang <[email protected]>
---
.../devicetree/bindings/pci/layerscape-pci.txt | 14 ++++++++++----
1 file changed, 10 insertions(+), 4 deletions(-)
diff --git a/Documentation/devicetree/bindings/pci/layerscape-pci.txt b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
index 0d3d78aebe26..5697fe078072 100644
--- a/Documentation/devicetree/bindings/pci/layerscape-pci.txt
+++ b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
@@ -31,8 +31,13 @@ Required properties:
- reg: base addresses and lengths of the PCIe controller register blocks.
- interrupts: A list of interrupt outputs of the controller. Must contain an
entry for each entry in the interrupt-names property.
-- interrupt-names: Must include the following entries:
- "intr": The interrupt that is asserted for controller interrupts
+- interrupt-names: It could include the following entries:
+ "aer": For interrupt line reporting aer events when non MSI/MSI-X/INTx mode
+ is used
+ "pme": For interrupt line reporting pme events when non MSI/MSI-X/INTx mode
+ is used
+ "intr": For interrupt line reporting miscellaneous controller events
+ ......
- fsl,pcie-scfg: Must include two entries.
The first entry must be a link to the SCFG device node
The second entry must be '0' or '1' based on physical PCIe controller index.
@@ -48,8 +53,9 @@ Example:
reg = <0x00 0x03400000 0x0 0x00010000 /* controller registers */
0x40 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "regs", "config";
- interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
- interrupt-names = "intr";
+ interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>, /* aer interrupt */
+ <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; /* pme interrupt */
+ interrupt-names = "aer", "pme";
fsl,pcie-scfg = <&scfg 0>;
#address-cells = <3>;
#size-cells = <2>;
--
2.25.1
From: Biwen Li <[email protected]>
Add flextimer2 based ftm_alarm1 node and enable it to be the default rtc
wakeup source for rdb and qds boards instead of the original flextimer1
based ftm_alarm0. The ftm_alarm0 node hence is disabled by default.
Signed-off-by: Biwen Li <[email protected]>
Signed-off-by: Li Yang <[email protected]>
---
arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts | 6 +++++-
arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts | 6 +++++-
arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 9 +++++++++
3 files changed, 19 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
index bfd14b64567e..0a8f68ff578f 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
@@ -25,7 +25,7 @@ aliases {
serial1 = &duart1;
mmc0 = &esdhc;
mmc1 = &esdhc1;
- rtc1 = &ftm_alarm0;
+ rtc1 = &ftm_alarm1;
};
chosen {
@@ -234,6 +234,10 @@ mt35xu02g0: flash@0 {
};
};
+&ftm_alarm1 {
+ status = "okay";
+};
+
&i2c0 {
status = "okay";
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
index d7b527272500..49ec2821d15f 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
@@ -21,7 +21,7 @@ aliases {
serial1 = &duart1;
mmc0 = &esdhc;
mmc1 = &esdhc1;
- rtc1 = &ftm_alarm0;
+ rtc1 = &ftm_alarm1;
};
chosen {
@@ -132,6 +132,10 @@ mt35xu02g0: flash@0 {
};
};
+&ftm_alarm1 {
+ status = "okay";
+};
+
&i2c0 {
status = "okay";
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index 424dc9e5c4e4..51d165440ce9 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -1160,6 +1160,15 @@ ftm_alarm0: timer@2800000 {
reg = <0x0 0x2800000 0x0 0x10000>;
fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0 0x0>;
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ ftm_alarm1: timer@2810000 {
+ compatible = "fsl,ls1028a-ftm-alarm";
+ reg = <0x0 0x2810000 0x0 0x10000>;
+ fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0 0x0>;
+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
};
};
--
2.25.1
From: Sahil Malhotra <[email protected]>
Optee node is disabled in SoC dtsi. We are enabling it on qds board.
Signed-off-by: Sahil Malhotra <[email protected]>
Signed-off-by: Li Yang <[email protected]>
---
arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
index 0e2cc610d138..9c74be22d263 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
@@ -349,6 +349,10 @@ &mscc_felix_port4 {
status = "okay";
};
+&optee {
+ status = "okay";
+};
+
&sai1 {
status = "okay";
};
--
2.25.1
From: Alex Marginean <[email protected]>
Add overlays for various serdes protocols on LS1028A QDS board using
different PHY cards. These should be applied at boot, based on serdes
configuration. If no overlay is applied, only the RGMII interface on
the QDS is available in Linux.
Building device tree fragments requires passing the "-@" argument to
dtc, which increases the base dtb size and might cause some platforms to
fail to store the new binary. To avoid that, it would be nice to only
pass "-@" for the platforms where fragments will be used, aka
LS1028A-QDS. One approach suggested by Rob Herring is used here:
https://lore.kernel.org/patchwork/patch/821645/
Also moved the enet* override nodes in dts file to be in alphabetic order.
Signed-off-by: Alex Marginean <[email protected]>
Signed-off-by: Ioana Ciornei <[email protected]>
Signed-off-by: Dong Aisheng <[email protected]>
Signed-off-by: Jason Liu <[email protected]>
Signed-off-by: Vladimir Oltean <[email protected]>
Signed-off-by: Li Yang <[email protected]>
---
arch/arm64/boot/dts/freescale/Makefile | 16 +++
.../dts/freescale/fsl-ls1028a-qds-13bb.dts | 113 ++++++++++++++++++
.../dts/freescale/fsl-ls1028a-qds-65bb.dts | 108 +++++++++++++++++
.../dts/freescale/fsl-ls1028a-qds-7777.dts | 82 +++++++++++++
.../dts/freescale/fsl-ls1028a-qds-85bb.dts | 107 +++++++++++++++++
.../dts/freescale/fsl-ls1028a-qds-899b.dts | 75 ++++++++++++
.../dts/freescale/fsl-ls1028a-qds-9999.dts | 79 ++++++++++++
.../boot/dts/freescale/fsl-ls1028a-qds.dts | 19 ++-
.../arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 2 +-
9 files changed, 595 insertions(+), 6 deletions(-)
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-13bb.dts
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-65bb.dts
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-7777.dts
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-85bb.dts
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-899b.dts
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-9999.dts
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index db9e36ebe932..ba453e7c9be0 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -1,4 +1,14 @@
# SPDX-License-Identifier: GPL-2.0
+
+# required for overlay support
+DTC_FLAGS_fsl-ls1028a-qds := -@
+DTC_FLAGS_fsl-ls1028a-qds-13bb := -@
+DTC_FLAGS_fsl-ls1028a-qds-65bb := -@
+DTC_FLAGS_fsl-ls1028a-qds-7777 := -@
+DTC_FLAGS_fsl-ls1028a-qds-85bb := -@
+DTC_FLAGS_fsl-ls1028a-qds-899b := -@
+DTC_FLAGS_fsl-ls1028a-qds-9999 := -@
+
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frdm.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frwy.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-oxalis.dtb
@@ -11,6 +21,12 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var2.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var3-ads2.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var4.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-13bb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-65bb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-7777.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-85bb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-899b.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-9999.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-rdb.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb.dtb
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-13bb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-13bb.dts
new file mode 100644
index 000000000000..f748a2c12a70
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-13bb.dts
@@ -0,0 +1,113 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree fragment for LS1028A QDS board, serdes 13bb
+ *
+ * Copyright 2019-2021 NXP
+ *
+ * Requires a LS1028A QDS board with lane B rework.
+ * Requires a SCH-30841 card with lane A of connector rewired to PHY lane C.
+ * Set-up is a SCH-30842 card in slot 1 and SCH-30841 in slot 2.
+ */
+
+/dts-v1/;
+/plugin/;
+
+/ {
+ fragment@0 {
+ target = <&mdio_slot1>;
+
+ __overlay__ {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ slot1_sgmii: ethernet-phy@2 {
+ /* AQR112 */
+ reg = <0x2>;
+ compatible = "ethernet-phy-ieee802.3-c45";
+ };
+ };
+ };
+
+ fragment@1 {
+ target = <&enetc_port0>;
+
+ __overlay__ {
+ phy-handle = <&slot1_sgmii>;
+ phy-mode = "usxgmii";
+ managed = "in-band-status";
+ status = "okay";
+ };
+ };
+
+ fragment@2 {
+ target = <&mdio_slot2>;
+
+ __overlay__ {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* 4 ports on AQR412 */
+ slot2_qxgmii0: ethernet-phy@0 {
+ reg = <0x0>;
+ compatible = "ethernet-phy-ieee802.3-c45";
+ };
+
+ slot2_qxgmii1: ethernet-phy@1 {
+ reg = <0x1>;
+ compatible = "ethernet-phy-ieee802.3-c45";
+ };
+
+ slot2_qxgmii2: ethernet-phy@2 {
+ reg = <0x2>;
+ compatible = "ethernet-phy-ieee802.3-c45";
+ };
+
+ slot2_qxgmii3: ethernet-phy@3 {
+ reg = <0x3>;
+ compatible = "ethernet-phy-ieee802.3-c45";
+ };
+ };
+ };
+
+ fragment@3 {
+ target = <&mscc_felix_ports>;
+
+ __overlay__ {
+ port@0 {
+ status = "okay";
+ phy-handle = <&slot2_qxgmii0>;
+ phy-mode = "usxgmii";
+ managed = "in-band-status";
+ };
+
+ port@1 {
+ status = "okay";
+ phy-handle = <&slot2_qxgmii1>;
+ phy-mode = "usxgmii";
+ managed = "in-band-status";
+ };
+
+ port@2 {
+ status = "okay";
+ phy-handle = <&slot2_qxgmii2>;
+ phy-mode = "usxgmii";
+ managed = "in-band-status";
+ };
+
+ port@3 {
+ status = "okay";
+ phy-handle = <&slot2_qxgmii3>;
+ phy-mode = "usxgmii";
+ managed = "in-band-status";
+ };
+ };
+ };
+
+ fragment@4 {
+ target = <&mscc_felix>;
+
+ __overlay__ {
+ status = "okay";
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-65bb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-65bb.dts
new file mode 100644
index 000000000000..8ffb707a1576
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-65bb.dts
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree fragment for LS1028A QDS board, serdes 69xx
+ *
+ * Copyright 2019-2021 NXP
+ *
+ * Requires a LS1028A QDS board with lane B rework.
+ * Requires a SCH-30842 card in slot 1 and a SCH-28021 card in slot 2.
+ */
+
+/dts-v1/;
+/plugin/;
+
+/ {
+ fragment@0 {
+ target = <&mdio_slot1>;
+
+ __overlay__ {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ slot1_sgmii: ethernet-phy@2 {
+ /* AQR112 */
+ reg = <0x2>;
+ compatible = "ethernet-phy-ieee802.3-c45";
+ };
+ };
+ };
+
+ fragment@1 {
+ target = <&enetc_port0>;
+
+ __overlay__ {
+ phy-handle = <&slot1_sgmii>;
+ phy-mode = "2500base-x";
+ managed = "in-band-status";
+ status = "okay";
+ };
+ };
+
+ fragment@2 {
+ target = <&mdio_slot2>;
+
+ __overlay__ {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* 4 ports on VSC8514 */
+ slot2_qsgmii0: ethernet-phy@8 {
+ reg = <0x8>;
+ };
+
+ slot2_qsgmii1: ethernet-phy@9 {
+ reg = <0x9>;
+ };
+
+ slot2_qsgmii2: ethernet-phy@a {
+ reg = <0xa>;
+ };
+
+ slot2_qsgmii3: ethernet-phy@b {
+ reg = <0xb>;
+ };
+ };
+ };
+
+ fragment@3 {
+ target = <&mscc_felix_ports>;
+
+ __overlay__ {
+ port@0 {
+ status = "okay";
+ phy-handle = <&slot2_qsgmii0>;
+ phy-mode = "qsgmii";
+ managed = "in-band-status";
+ };
+
+ port@1 {
+ status = "okay";
+ phy-handle = <&slot2_qsgmii1>;
+ phy-mode = "qsgmii";
+ managed = "in-band-status";
+ };
+
+ port@2 {
+ status = "okay";
+ phy-handle = <&slot2_qsgmii2>;
+ phy-mode = "qsgmii";
+ managed = "in-band-status";
+ };
+
+ port@3 {
+ status = "okay";
+ phy-handle = <&slot2_qsgmii3>;
+ phy-mode = "qsgmii";
+ managed = "in-band-status";
+ };
+ };
+ };
+
+ fragment@4 {
+ target = <&mscc_felix>;
+
+ __overlay__ {
+ status = "okay";
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-7777.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-7777.dts
new file mode 100644
index 000000000000..eb6a1e674f10
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-7777.dts
@@ -0,0 +1,82 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree fragment for LS1028A QDS board, serdes 7777
+ *
+ * Copyright 2019-2021 NXP
+ *
+ * Requires a LS1028A QDS board without lane B rework.
+ * Requires a SCH-30841 card without lane A/C rewire and with a FW with muxing
+ * disabled, plugged in slot 1.
+ */
+
+/dts-v1/;
+/plugin/;
+
+/ {
+ fragment@0 {
+ target = <&mdio_slot1>;
+
+ __overlay__ {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* 4 ports on AQR412 */
+ slot1_sxgmii0: ethernet-phy@0 {
+ reg = <0x0>;
+ compatible = "ethernet-phy-ieee802.3-c45";
+ };
+
+ slot1_sxgmii1: ethernet-phy@1 {
+ reg = <0x1>;
+ compatible = "ethernet-phy-ieee802.3-c45";
+ };
+
+ slot1_sxgmii2: ethernet-phy@2 {
+ reg = <0x2>;
+ compatible = "ethernet-phy-ieee802.3-c45";
+ };
+
+ slot1_sxgmii3: ethernet-phy@3 {
+ reg = <0x3>;
+ compatible = "ethernet-phy-ieee802.3-c45";
+ };
+ };
+ };
+
+ fragment@1 {
+ target = <&mscc_felix_ports>;
+
+ __overlay__ {
+ port@0 {
+ status = "okay";
+ phy-handle = <&slot1_sxgmii0>;
+ phy-mode = "2500base-x";
+ };
+
+ port@1 {
+ status = "okay";
+ phy-handle = <&slot1_sxgmii1>;
+ phy-mode = "2500base-x";
+ };
+
+ port@2 {
+ status = "okay";
+ phy-handle = <&slot1_sxgmii2>;
+ phy-mode = "2500base-x";
+ };
+
+ port@3 {
+ status = "okay";
+ phy-handle = <&slot1_sxgmii3>;
+ phy-mode = "2500base-x";
+ };
+ };
+ };
+
+ fragment@2 {
+ target = <&mscc_felix>;
+ __overlay__ {
+ status = "okay";
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-85bb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-85bb.dts
new file mode 100644
index 000000000000..8e90c3088ba1
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-85bb.dts
@@ -0,0 +1,107 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree fragment for LS1028A QDS board, serdes 85bb
+ *
+ * Copyright 2019-2021 NXP
+ *
+ * Requires a LS1028A QDS board with lane B rework.
+ * Requires a SCH-24801 card in slot 1 and a SCH-28021 card in slot 2.
+ */
+
+/dts-v1/;
+/plugin/;
+
+/ {
+ fragment@0 {
+ target = <&mdio_slot1>;
+
+ __overlay__ {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ slot1_sgmii: ethernet-phy@1c {
+ /* 1st port on VSC8234 */
+ reg = <0x1c>;
+ };
+ };
+ };
+
+ fragment@1 {
+ target = <&enetc_port0>;
+
+ __overlay__ {
+ phy-handle = <&slot1_sgmii>;
+ phy-mode = "sgmii";
+ managed = "in-band-status";
+ status = "okay";
+ };
+ };
+
+ fragment@2 {
+ target = <&mdio_slot2>;
+
+ __overlay__ {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* 4 ports on VSC8514 */
+ slot2_qsgmii0: ethernet-phy@8 {
+ reg = <0x8>;
+ };
+
+ slot2_qsgmii1: ethernet-phy@9 {
+ reg = <0x9>;
+ };
+
+ slot2_qsgmii2: ethernet-phy@a {
+ reg = <0xa>;
+ };
+
+ slot2_qsgmii3: ethernet-phy@b {
+ reg = <0xb>;
+ };
+ };
+ };
+
+ fragment@3 {
+ target = <&mscc_felix_ports>;
+
+ __overlay__ {
+ port@0 {
+ status = "okay";
+ phy-handle = <&slot2_qsgmii0>;
+ phy-mode = "qsgmii";
+ managed = "in-band-status";
+ };
+
+ port@1 {
+ status = "okay";
+ phy-handle = <&slot2_qsgmii1>;
+ phy-mode = "qsgmii";
+ managed = "in-band-status";
+ };
+
+ port@2 {
+ status = "okay";
+ phy-handle = <&slot2_qsgmii2>;
+ phy-mode = "qsgmii";
+ managed = "in-band-status";
+ };
+
+ port@3 {
+ status = "okay";
+ phy-handle = <&slot2_qsgmii3>;
+ phy-mode = "qsgmii";
+ managed = "in-band-status";
+ };
+ };
+ };
+
+ fragment@4 {
+ target = <&mscc_felix>;
+
+ __overlay__ {
+ status = "okay";
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-899b.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-899b.dts
new file mode 100644
index 000000000000..5d0a094e6c44
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-899b.dts
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree fragment for LS1028A QDS board, serdes 85xx
+ *
+ * Copyright 2019-2021 NXP
+ *
+ * Requires a LS1028A QDS board without lane B rework.
+ * Requires a SCH-24801 card in slot 1.
+ */
+
+/dts-v1/;
+/plugin/;
+
+/ {
+ fragment@0 {
+ target = <&mdio_slot1>;
+ __overlay__ {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* VSC8234 */
+ slot1_sgmii0: ethernet-phy@1c {
+ reg = <0x1c>;
+ };
+
+ slot1_sgmii1: ethernet-phy@1d {
+ reg = <0x1d>;
+ };
+
+ slot1_sgmii2: ethernet-phy@1e {
+ reg = <0x1e>;
+ };
+
+ slot1_sgmii3: ethernet-phy@1f {
+ reg = <0x1f>;
+ };
+ };
+ };
+
+ fragment@1 {
+ target = <&enetc_port0>;
+ __overlay__ {
+ phy-handle = <&slot1_sgmii0>;
+ phy-mode = "sgmii";
+ managed = "in-band-status";
+ status = "okay";
+ };
+ };
+
+ fragment@2 {
+ target = <&mscc_felix_ports>;
+ __overlay__ {
+ port@1 {
+ status = "okay";
+ phy-handle = <&slot1_sgmii1>;
+ phy-mode = "sgmii";
+ managed = "in-band-status";
+ };
+
+ port@2 {
+ status = "okay";
+ phy-handle = <&slot1_sgmii2>;
+ phy-mode = "sgmii";
+ managed = "in-band-status";
+ };
+ };
+ };
+
+ fragment@3 {
+ target = <&mscc_felix>;
+ __overlay__ {
+ status = "okay";
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-9999.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-9999.dts
new file mode 100644
index 000000000000..1ef743c48e84
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-9999.dts
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree fragment for LS1028A QDS board, serdes 85xx
+ *
+ * Copyright 2019-2021 NXP
+ *
+ * Requires a LS1028A QDS board without lane B rework.
+ * Requires a SCH-24801 card in slot 1.
+ */
+
+/dts-v1/;
+/plugin/;
+
+/ {
+ fragment@0 {
+ target = <&mdio_slot1>;
+ __overlay__ {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* VSC8234 */
+ slot1_sgmii0: ethernet-phy@1c {
+ reg = <0x1c>;
+ };
+
+ slot1_sgmii1: ethernet-phy@1d {
+ reg = <0x1d>;
+ };
+
+ slot1_sgmii2: ethernet-phy@1e {
+ reg = <0x1e>;
+ };
+
+ slot1_sgmii3: ethernet-phy@1f {
+ reg = <0x1f>;
+ };
+ };
+ };
+
+ fragment@1 {
+ target = <&mscc_felix_ports>;
+ __overlay__ {
+ port@0 {
+ status = "okay";
+ phy-handle = <&slot1_sgmii0>;
+ phy-mode = "sgmii";
+ managed = "in-band-status";
+ };
+
+ port@1 {
+ status = "okay";
+ phy-handle = <&slot1_sgmii1>;
+ phy-mode = "sgmii";
+ managed = "in-band-status";
+ };
+
+ port@2 {
+ status = "okay";
+ phy-handle = <&slot1_sgmii2>;
+ phy-mode = "sgmii";
+ managed = "in-band-status";
+ };
+
+ port@3 {
+ status = "okay";
+ phy-handle = <&slot1_sgmii3>;
+ phy-mode = "sgmii";
+ managed = "in-band-status";
+ };
+ };
+ };
+
+ fragment@2 {
+ target = <&mscc_felix>;
+ __overlay__ {
+ status = "okay";
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
index 4e58a03a9985..0e2cc610d138 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
@@ -211,6 +211,16 @@ &duart1 {
status = "okay";
};
+&enetc_port1 {
+ phy-handle = <&qds_phy1>;
+ phy-connection-type = "rgmii-id";
+ status = "okay";
+};
+
+&enetc_port2 {
+ status = "okay";
+};
+
&esdhc {
status = "okay";
};
@@ -326,17 +336,16 @@ rtc@51 {
};
};
-&enetc_port1 {
- phy-handle = <&qds_phy1>;
- phy-connection-type = "rgmii-id";
+&lpuart0 {
status = "okay";
};
-&lpuart0 {
+&lpuart1 {
status = "okay";
};
-&lpuart1 {
+&mscc_felix_port4 {
+ ethernet = <&enetc_port2>;
status = "okay";
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index bdd36a2dcb98..ba12d2a75c3e 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -1080,7 +1080,7 @@ mscc_felix: ethernet-switch@0,5 {
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
- ports {
+ mscc_felix_ports: ports {
#address-cells = <1>;
#size-cells = <0>;
--
2.25.1
From: Biwen Li <[email protected]>
Enable pwm0 on ls1028a-rdb board which uses flextimer1.
Signed-off-by: Biwen Li <[email protected]>
Signed-off-by: Li Yang <[email protected]>
---
arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
index 81d0f3ac27ec..0b8c3d761b48 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
@@ -283,6 +283,10 @@ &optee {
status = "okay";
};
+&pwm0 {
+ status = "okay";
+};
+
&sai4 {
status = "okay";
};
--
2.25.1
Keep these overrides node in alphabetic order in order to prevent
unnoticed duplicated nodes.
Signed-off-by: Li Yang <[email protected]>
---
.../boot/dts/freescale/fsl-ls1028a-rdb.dts | 92 +++++++++----------
1 file changed, 46 insertions(+), 46 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
index 49ec2821d15f..81d0f3ac27ec 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
@@ -102,6 +102,52 @@ can-transceiver {
};
};
+&duart0 {
+ status = "okay";
+};
+
+&duart1 {
+ status = "okay";
+};
+
+&enetc_mdio_pf3 {
+ /* VSC8514 QSGMII quad PHY */
+ qsgmii_phy0: ethernet-phy@10 {
+ reg = <0x10>;
+ };
+
+ qsgmii_phy1: ethernet-phy@11 {
+ reg = <0x11>;
+ };
+
+ qsgmii_phy2: ethernet-phy@12 {
+ reg = <0x12>;
+ };
+
+ qsgmii_phy3: ethernet-phy@13 {
+ reg = <0x13>;
+ };
+};
+
+&enetc_port0 {
+ phy-handle = <&sgmii_phy0>;
+ phy-connection-type = "sgmii";
+ managed = "in-band-status";
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ sgmii_phy0: ethernet-phy@2 {
+ reg = <0x2>;
+ };
+ };
+};
+
+&enetc_port2 {
+ status = "okay";
+};
+
&esdhc {
sd-uhs-sdr104;
sd-uhs-sdr50;
@@ -192,52 +238,6 @@ rtc@51 {
};
};
-&duart0 {
- status = "okay";
-};
-
-&duart1 {
- status = "okay";
-};
-
-&enetc_mdio_pf3 {
- /* VSC8514 QSGMII quad PHY */
- qsgmii_phy0: ethernet-phy@10 {
- reg = <0x10>;
- };
-
- qsgmii_phy1: ethernet-phy@11 {
- reg = <0x11>;
- };
-
- qsgmii_phy2: ethernet-phy@12 {
- reg = <0x12>;
- };
-
- qsgmii_phy3: ethernet-phy@13 {
- reg = <0x13>;
- };
-};
-
-&enetc_port0 {
- phy-handle = <&sgmii_phy0>;
- phy-connection-type = "sgmii";
- managed = "in-band-status";
- status = "okay";
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- sgmii_phy0: ethernet-phy@2 {
- reg = <0x2>;
- };
- };
-};
-
-&enetc_port2 {
- status = "okay";
-};
-
&mscc_felix {
status = "okay";
};
--
2.25.1
From: Vabhav Sharma <[email protected]>
LPUART nodes by default are disabled in LS1028A device
tree, Enabling LPUART1 node.
Signed-off-by: Vabhav Sharma <[email protected]>
Acked-by: Fugang Duan <[email protected]>
Signed-off-by: Vladimir Oltean <[email protected]>
---
arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
index d10593a191e5..4e58a03a9985 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
@@ -336,6 +336,10 @@ &lpuart0 {
status = "okay";
};
+&lpuart1 {
+ status = "okay";
+};
+
&sai1 {
status = "okay";
};
--
2.25.1
From: Biwen Li <[email protected]>
The i2c rtc is on i2c2 bus not i2c1 bus, so fix it in dts.
Signed-off-by: Biwen Li <[email protected]>
Signed-off-by: Li Yang <[email protected]>
---
arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts | 14 +++++++++-----
1 file changed, 9 insertions(+), 5 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
index 0a8f68ff578f..d10593a191e5 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
@@ -276,11 +276,6 @@ temperature-sensor@4c {
vcc-supply = <&sb_3v3>;
};
- rtc@51 {
- compatible = "nxp,pcf2129";
- reg = <0x51>;
- };
-
eeprom@56 {
compatible = "atmel,24c512";
reg = <0x56>;
@@ -322,6 +317,15 @@ mux: mux-controller {
};
+&i2c1 {
+ status = "okay";
+
+ rtc@51 {
+ compatible = "nxp,pcf2129";
+ reg = <0x51>;
+ };
+};
+
&enetc_port1 {
phy-handle = <&qds_phy1>;
phy-connection-type = "rgmii-id";
--
2.25.1
Hi Leo,
We support OP-TEE on LS1028A-RDB only as of now.
LS1028A-QDS doesn't support OP-TEE.
Regards,
Sahil Malhotra
-----Original Message-----
From: Li Yang <[email protected]>
Sent: Saturday, November 13, 2021 4:05 AM
To: Bjorn Helgaas <[email protected]>; Rob Herring <[email protected]>; Shawn Guo <[email protected]>
Cc: [email protected]; [email protected]; [email protected]; [email protected]; Sahil Malhotra <[email protected]>; Leo Li <[email protected]>
Subject: [PATCH 11/11] arm64: dts: ls1028a-qds: enable optee node
From: Sahil Malhotra <[email protected]>
Optee node is disabled in SoC dtsi. We are enabling it on qds board.
Signed-off-by: Sahil Malhotra <[email protected]>
Signed-off-by: Li Yang <[email protected]>
---
arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
index 0e2cc610d138..9c74be22d263 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
@@ -349,6 +349,10 @@ &mscc_felix_port4 {
status = "okay";
};
+&optee {
+ status = "okay";
+};
+
&sai1 {
status = "okay";
};
--
2.25.1
> -----Original Message-----
> From: Sahil Malhotra <[email protected]>
> Sent: Saturday, November 13, 2021 12:37 AM
> To: Leo Li <[email protected]>; Bjorn Helgaas <[email protected]>;
> Rob Herring <[email protected]>; Shawn Guo <[email protected]>
> Cc: [email protected]; [email protected]; linux-
> [email protected]; [email protected]; Leo Li
> <[email protected]>
> Subject: RE: [PATCH 11/11] arm64: dts: ls1028a-qds: enable optee node
>
> Hi Leo,
>
> We support OP-TEE on LS1028A-RDB only as of now.
> LS1028A-QDS doesn't support OP-TEE.
I thought it was supported as you were adding the o-tee node to the soc dtsi.
We will drop this patch then.
Regards,
Leo
>
> Regards,
> Sahil Malhotra
>
> -----Original Message-----
> From: Li Yang <[email protected]>
> Sent: Saturday, November 13, 2021 4:05 AM
> To: Bjorn Helgaas <[email protected]>; Rob Herring
> <[email protected]>; Shawn Guo <[email protected]>
> Cc: [email protected]; [email protected]; linux-
> [email protected]; [email protected]; Sahil
> Malhotra <[email protected]>; Leo Li <[email protected]>
> Subject: [PATCH 11/11] arm64: dts: ls1028a-qds: enable optee node
>
> From: Sahil Malhotra <[email protected]>
>
> Optee node is disabled in SoC dtsi. We are enabling it on qds board.
>
> Signed-off-by: Sahil Malhotra <[email protected]>
> Signed-off-by: Li Yang <[email protected]>
> ---
> arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
> b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
> index 0e2cc610d138..9c74be22d263 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
> @@ -349,6 +349,10 @@ &mscc_felix_port4 {
> status = "okay";
> };
>
> +&optee {
> + status = "okay";
> +};
> +
> &sai1 {
> status = "okay";
> };
> --
> 2.25.1