2021-11-18 03:02:55

by zhangyue

Subject: [PATCH] net: tulip: de4x5: fix the problem that the array 'lp->phy[8]' may be out of bound

In line 5001, if all id in the array 'lp->phy[8]' is not 0, when the
'for' end, the 'k' is 8.

At this time, the array 'lp->phy[8]' may be out of bound.

Signed-off-by: zhangyue <[email protected]>
---
drivers/net/ethernet/dec/tulip/de4x5.c | 30 +++++++++++++++-----------
1 file changed, 17 insertions(+), 13 deletions(-)

diff --git a/drivers/net/ethernet/dec/tulip/de4x5.c b/drivers/net/ethernet/dec/tulip/de4x5.c
index c813e6f2b371..a80252973171 100644
--- a/drivers/net/ethernet/dec/tulip/de4x5.c
+++ b/drivers/net/ethernet/dec/tulip/de4x5.c
@@ -4999,19 +4999,23 @@ mii_get_phy(struct net_device *dev)
}
if ((j == limit) && (i < DE4X5_MAX_MII)) {
for (k=0; k < DE4X5_MAX_PHY && lp->phy[k].id; k++);
- lp->phy[k].addr = i;
- lp->phy[k].id = id;
- lp->phy[k].spd.reg = GENERIC_REG; /* ANLPA register */
- lp->phy[k].spd.mask = GENERIC_MASK; /* 100Mb/s technologies */
- lp->phy[k].spd.value = GENERIC_VALUE; /* TX & T4, H/F Duplex */
- lp->mii_cnt++;
- lp->active++;
- printk("%s: Using generic MII device control. If the board doesn't operate,\nplease mail the following dump to the author:\n", dev->name);
- j = de4x5_debug;
- de4x5_debug |= DEBUG_MII;
- de4x5_dbg_mii(dev, k);
- de4x5_debug = j;
- printk("\n");
+ if (k < DE4X5_MAX_PHY) {
+ lp->phy[k].addr = i;
+ lp->phy[k].id = id;
+ lp->phy[k].spd.reg = GENERIC_REG; /* ANLPA register */
+ lp->phy[k].spd.mask = GENERIC_MASK; /* 100Mb/s technologies */
+ lp->phy[k].spd.value = GENERIC_VALUE; /* TX & T4, H/F Duplex */
+ lp->mii_cnt++;
+ lp->active++;
+ printk("%s: Using generic MII device control. If the board doesn't operate,\nplease mail the following dump to the author:\n", dev->name);
+ j = de4x5_debug;
+ de4x5_debug |= DEBUG_MII;
+ de4x5_dbg_mii(dev, k);
+ de4x5_debug = j;
+ printk("\n");
+ } else {
+ goto purgatory;
+ }
}
}
purgatory:
--
2.30.0

2021-11-18 03:58:52

by Jakub Kicinski

Subject: Re: [PATCH] net: tulip: de4x5: fix the problem that the array 'lp->phy[8]' may be out of bound

On Sun, 14 Nov 2021 05:29:21 +0800 zhangyue wrote:
> In line 5001, if all id in the array 'lp->phy[8]' is not 0, when the
> 'for' end, the 'k' is 8.
>
> At this time, the array 'lp->phy[8]' may be out of bound.
>
> Signed-off-by: zhangyue <[email protected]>

Please fix the date on your system and repost.