On Fri, Oct 29, 2021 at 06:49:18PM +0800, Slark Xiao wrote:
> Add new device ID 0xe0bf for T99W175.
> This device ID is created because it is using Qualcomm SDX55 new base line.
>
> Test evidence as below:
> root@jbd-ThinkPad-P1-Gen-4:/dev# lspci -nn | grep Foxconn
> 0000:08:00.0 Wireless controller [0d40]: Foxconn International, Inc. Device [105b:e0bf]
> root@jbd-ThinkPad-P1-Gen-4:/dev# cat wwan0at0 & echo -ne "ati\r" > wwan0at0
> [2] 2977
> root@jbd-ThinkPad-P1-Gen-4:/dev# ati
> Manufacturer: Qualcomm
> Model: T99W175
> Revision: T99W175.F0.6.0.0.6.CC.005 1 [Oct 21 2021 10:00:00]
> IMEI:
> +GCAP: +CGSM
>
> OK
>
> Signed-off-by: Slark Xiao <[email protected]>
Applied to mhi-next!
Thanks,
Mani
> ---
>
> v2: Add descriptions about the dfiiference between 0xe0ab and 0xeobf.
> ---
> drivers/bus/mhi/pci_generic.c | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/drivers/bus/mhi/pci_generic.c b/drivers/bus/mhi/pci_generic.c
> index 59a4896a8030..94d8aa9c2eae 100644
> --- a/drivers/bus/mhi/pci_generic.c
> +++ b/drivers/bus/mhi/pci_generic.c
> @@ -423,6 +423,9 @@ static const struct pci_device_id mhi_pci_id_table[] = {
> /* DW5930e (sdx55), Non-eSIM, It's also T99W175 */
> { PCI_DEVICE(PCI_VENDOR_ID_FOXCONN, 0xe0b1),
> .driver_data = (kernel_ulong_t) &mhi_foxconn_sdx55_info },
> + /* T99W175 (sdx55), Based on Qualcomm new baseline */
> + { PCI_DEVICE(PCI_VENDOR_ID_FOXCONN, 0xe0bf),
> + .driver_data = (kernel_ulong_t) &mhi_foxconn_sdx55_info },
> /* MV31-W (Cinterion) */
> { PCI_DEVICE(0x1269, 0x00b3),
> .driver_data = (kernel_ulong_t) &mhi_mv31_info },
> --
> 2.25.1
>