This is the start of the stable review cycle for the 5.15.5 release.
There are 279 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Fri, 26 Nov 2021 11:56:36 +0000.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.5-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 5.15.5-rc1
Randy Dunlap <[email protected]>
x86/Kconfig: Fix an unused variable error in dell-smm-hwmon
Eric Dumazet <[email protected]>
net: add and use skb_unclone_keeptruesize() helper
Josef Bacik <[email protected]>
btrfs: update device path inode time instead of bd_inode
Josef Bacik <[email protected]>
fs: export an inode_update_time helper
Leon Romanovsky <[email protected]>
ice: Delete always true check of PF pointer
Brett Creeley <[email protected]>
ice: Fix VF true promiscuous mode
Uwe Kleine-König <[email protected]>
usb: max-3421: Use driver data instead of maintaining a list of bound devices
Kuninori Morimoto <[email protected]>
ASoC: rsnd: fixup DMAEngine API
Takashi Iwai <[email protected]>
ASoC: DAPM: Cover regression by kctl change notification fix
Ondrej Mosnacek <[email protected]>
selinux: fix NULL-pointer dereference when hashtab allocation fails
Dmitrii Banshchikov <[email protected]>
bpf: Forbid bpf_ktime_get_coarse_ns and bpf_timer_* in tracing progs
Leon Romanovsky <[email protected]>
RDMA/netlink: Add __maybe_unused to static inline in C file
Nadav Amit <[email protected]>
hugetlbfs: flush TLBs correctly after huge_pmd_unshare
Eric W. Biederman <[email protected]>
signal: Replace force_fatal_sig with force_exit_sig when in doubt
Eric W. Biederman <[email protected]>
signal: Don't always set SA_IMMUTABLE for forced signals
Eric W. Biederman <[email protected]>
signal: Replace force_sigsegv(SIGSEGV) with force_fatal_sig(SIGSEGV)
Eric W. Biederman <[email protected]>
signal/x86: In emulate_vsyscall force a signal instead of calling do_exit
Eric W. Biederman <[email protected]>
signal/vm86_32: Properly send SIGSEGV when the vm86 state cannot be saved.
Eric W. Biederman <[email protected]>
signal/sparc32: In setup_rt_frame and setup_fram use force_fatal_sig
Eric W. Biederman <[email protected]>
signal/sparc32: Exit with a fatal signal when try_to_clear_window_buffer fails
Eric W. Biederman <[email protected]>
signal/s390: Use force_sigsegv in default_trap_handler
Eric W. Biederman <[email protected]>
signal/powerpc: On swapcontext failure force SIGSEGV
Eric W. Biederman <[email protected]>
exit/syscall_user_dispatch: Send ordinary signals on failure
Eric W. Biederman <[email protected]>
signal: Implement force_fatal_sig
Evan Quan <[email protected]>
drm/amd/pm: avoid duplicate powergate/ungate setting
hongao <[email protected]>
drm/amdgpu: fix set scaling mode Full/Full aspect/Center not works on vga and dvi connectors
Ville Syrjälä <[email protected]>
drm/i915: Fix type1 DVI DP dual mode adapter heuristic for modern platforms
Imre Deak <[email protected]>
drm/i915/dp: Ensure max link params are always valid
Imre Deak <[email protected]>
drm/i915/dp: Ensure sink rate values are always valid
Jeremy Cline <[email protected]>
drm/nouveau: clean up all clients on device removal
Jeremy Cline <[email protected]>
drm/nouveau: use drm_dev_unplug() during device removal
Jeremy Cline <[email protected]>
drm/nouveau: Add a dedicated mutex for the clients list
Anand K Mistry <[email protected]>
drm/prime: Fix use after free in mmap with drm_gem_ttm_mmap
Johan Hovold <[email protected]>
drm/udl: fix control-message timeout
Matthew Brost <[email protected]>
drm/i915/guc: Unwind context requests in reverse order
Matthew Brost <[email protected]>
drm/i915/guc: Don't drop ce->guc_active.lock when unwinding context
Matthew Brost <[email protected]>
drm/i915/guc: Workaround reset G2H is received after schedule done G2H
Matthew Brost <[email protected]>
drm/i915/guc: Don't enable scheduling on a banned context, guc_id invalid, not registered
Matthew Brost <[email protected]>
drm/i915/guc: Fix outstanding G2H accounting
Roman Li <[email protected]>
drm/amd/display: Limit max DSC target bpp for specific monitors
Alvin Lee <[email protected]>
drm/amd/display: Update swizzle mode enums
Felix Fietkau <[email protected]>
mac80211: drop check for DONT_REORDER in __ieee80211_select_queue
Johannes Berg <[email protected]>
mac80211: fix radiotap header generation
Nguyen Dinh Phi <[email protected]>
cfg80211: call cfg80211_stop_ap when switch from P2P_GO type
Sven Schnelle <[email protected]>
parisc/sticon: fix reverse colors
Thomas Gleixner <[email protected]>
net: stmmac: Fix signed/unsigned wreckage
Christian Brauner <[email protected]>
fs: handle circular mappings correctly
Nikolay Borisov <[email protected]>
btrfs: fix memory ordering between normal and ordered work functions
Boqun Feng <[email protected]>
Drivers: hv: balloon: Use VMBUS_RING_SIZE() wrapper for dm_ring_size
Meng Li <[email protected]>
net: stmmac: socfpga: add runtime suspend/resume callback for stratix10 platform
Michael Walle <[email protected]>
spi: fix use-after-free of the add_lock mutex
Jan Kara <[email protected]>
udf: Fix crash after seekdir
Nicholas Piggin <[email protected]>
printk: restore flushing of NMI buffers on remote CPUs after NMI backtraces
Thomas Zimmermann <[email protected]>
drm/cma-helper: Release non-coherent memory with dma_free_noncoherent()
Maxim Levitsky <[email protected]>
KVM: nVMX: don't use vcpu->arch.efer when checking host state on nested state load
Sean Christopherson <[email protected]>
KVM: SEV: Disallow COPY_ENC_CONTEXT_FROM if target has created vCPUs
Javier Martinez Canillas <[email protected]>
fbdev: Prevent probing generic drivers if a FB is already registered
Alistair Delva <[email protected]>
block: Check ADMIN before NICE for IOPRIO_CLASS_RT
Alexander Egorenkov <[email protected]>
s390/dump: fix copying to user-space of swapped kdump oldmem
Baoquan He <[email protected]>
s390/kexec: fix memory leak of ipl report buffer
Sven Schnelle <[email protected]>
s390/vdso: filter out -mstack-guard and -mstack-size
Vasily Gorbik <[email protected]>
s390/boot: simplify and fix kernel memory layout setup
Vasily Gorbik <[email protected]>
s390/setup: avoid reserving memory above identity mapping
Sergio Paracuellos <[email protected]>
pinctrl: ralink: include 'ralink_regs.h' in 'pinctrl-mt7620.c'
Ewan D. Milne <[email protected]>
scsi: qla2xxx: Fix mailbox direction flags in qla2xxx_get_adapter_id()
Damien Le Moal <[email protected]>
ata: libata: add missing ata_identify_page_supported() calls
Damien Le Moal <[email protected]>
ata: libata: improve ata_read_log_page() error message
Helge Deller <[email protected]>
Revert "parisc: Reduce sigreturn trampoline to 3 instructions"
Vandita Kulkarni <[email protected]>
Revert "drm/i915/tgl/dsi: Gate the ddi clocks after pll mapping"
Christophe Leroy <[email protected]>
powerpc/8xx: Fix pinned TLBs with CONFIG_STRICT_KERNEL_RWX
Cédric Le Goater <[email protected]>
powerpc/xive: Change IRQ domain to a tree domain
Christophe Leroy <[email protected]>
powerpc/signal32: Fix sigset_t copy
David Woodhouse <[email protected]>
KVM: x86/xen: Fix get_attr of KVM_XEN_ATTR_TYPE_SHARED_INFO
Maxim Levitsky <[email protected]>
KVM: x86/mmu: include EFER.LMA in extended mmu role
黄乐 <[email protected]>
KVM: x86: Fix uninitialized eoi_exit_bitmap usage in vcpu_load_eoi_exitmap()
Tom Lendacky <[email protected]>
KVM: x86: Assume a 64-bit hypercall for guests with protected state
Sean Christopherson <[email protected]>
x86/hyperv: Fix NULL deref in set_hv_tscchange_cb() if Hyper-V setup fails
Reinette Chatre <[email protected]>
x86/sgx: Fix free page accounting
Borislav Petkov <[email protected]>
x86/boot: Pull up cmdline preparation and early param parsing
SeongJae Park <[email protected]>
mm/damon/dbgfs: fix missed use of damon_dbgfs_lock
SeongJae Park <[email protected]>
mm/damon/dbgfs: use '__GFP_NOWARN' for user-specified size buffer allocation
Ard Biesheuvel <[email protected]>
kmap_local: don't assume kmap PTEs are linear arrays in memory
Mina Almasry <[email protected]>
hugetlb, userfaultfd: fix reservation restore on userfaultfd error
Rustam Kovhaev <[email protected]>
mm: kmemleak: slob: respect SLAB_NOLEAKTRACE flag
Alexander Mikhalitsyn <[email protected]>
shm: extend forced shm destroy to support objects from several IPC nses
Alexander Mikhalitsyn <[email protected]>
ipc: WARN if trying to remove ipc object which is absent
Tadeusz Struk <[email protected]>
tipc: check for null after calling kmemdup
Nathan Chancellor <[email protected]>
hexagon: clean up timer-regs.h
Nathan Chancellor <[email protected]>
hexagon: export raw I/O routines for modules
Geert Uytterhoeven <[email protected]>
pstore/blk: Use "%lu" to format unsigned long
Kees Cook <[email protected]>
Revert "mark pstore-blk as broken"
Nicolas Dichtel <[email protected]>
tun: fix bonding active backup with arp monitoring
Arnd Bergmann <[email protected]>
dmaengine: remove debugfs #ifdef
Yu Kuai <[email protected]>
blk-cgroup: fix missing put device in error path from blkg_conf_pref()
Heiko Carstens <[email protected]>
s390/kexec: fix return code handling
Alexander Antonov <[email protected]>
perf/x86/intel/uncore: Fix IIO event constraints for Snowridge
Alexander Antonov <[email protected]>
perf/x86/intel/uncore: Fix IIO event constraints for Skylake Server
Alexander Antonov <[email protected]>
perf/x86/intel/uncore: Fix filter_tid mask for CHA events on Skylake Server
Bjorn Andersson <[email protected]>
pinctrl: qcom: sm8350: Correct UFS and SDC offsets
Bjorn Andersson <[email protected]>
pinctrl: qcom: sdm845: Enable dual edge errata
Nicholas Piggin <[email protected]>
powerpc/pseries: Fix numa FORM2 parsing fallback code
Nicholas Piggin <[email protected]>
powerpc/pseries: rename numa_dist_table to form2_distances
Masahiro Yamada <[email protected]>
powerpc: clean vdso32 and vdso64 directories
Michael Ellerman <[email protected]>
KVM: PPC: Book3S HV: Use GLOBAL_TOC for kvmppc_h_set_dabr/xdabr()
Andreas Schwab <[email protected]>
riscv: fix building external modules
Arnaldo Carvalho de Melo <[email protected]>
tools build: Fix removal of feature-sync-compare-and-swap feature detection
Sohaib Mohamed <[email protected]>
perf bench: Fix two memory leaks detected with ASan
Dan Carpenter <[email protected]>
ptp: ocp: Fix a couple NULL vs IS_ERR() checks
Jesse Brandeburg <[email protected]>
e100: fix device suspend/resume
Lin Ma <[email protected]>
NFC: add NCI_UNREG flag to eliminate the race
Lin Ma <[email protected]>
NFC: reorder the logic in nfc_{un,}register_device
Lin Ma <[email protected]>
NFC: reorganize the functions in nci_request
Grzegorz Szczurek <[email protected]>
i40e: Fix display error code in dmesg
Jedrzej Jagielski <[email protected]>
i40e: Fix creation of first queue by omitting it if is not power of two
Karen Sornek <[email protected]>
i40e: Fix warning message and call stack during rmmod i40e driver
Jack Wang <[email protected]>
RDMA/mlx4: Do not fail the registration on port stats
Eryk Rybak <[email protected]>
i40e: Fix ping is lost after configuring ADq on VF
Eryk Rybak <[email protected]>
i40e: Fix changing previously set num_queue_pairs for PFs
Michal Maloszewski <[email protected]>
i40e: Fix NULL ptr dereference on VSI filter sync
Eryk Rybak <[email protected]>
i40e: Fix correct max_pkt_size on VF RX queue
Jonathan Davies <[email protected]>
net: virtio_net_hdr_to_skb: count transport header in UFO
Pavel Skripkin <[email protected]>
net: dpaa2-eth: fix use-after-free in dpaa2_eth_remove
Xin Long <[email protected]>
net: sched: act_mirred: drop dst for the direction from egress to ingress
Marcin Wojtas <[email protected]>
net: mvmdio: fix compilation warning
Adrian Hunter <[email protected]>
scsi: ufs: core: Fix another task management completion race
Adrian Hunter <[email protected]>
scsi: ufs: core: Fix task management completion timeout race
Mike Christie <[email protected]>
scsi: core: sysfs: Fix hang when device state is set via sysfs
Bart Van Assche <[email protected]>
scsi: ufs: core: Improve SCSI abort handling
Raed Salem <[email protected]>
net/mlx5: E-Switch, return error if encap isn't supported
Maher Sanalla <[email protected]>
net/mlx5: Lag, update tracker when state change event received
Roi Dayan <[email protected]>
net/mlx5e: CT, Fix multiple allocations and memleak of mod acts
Mark Bloch <[email protected]>
net/mlx5: E-Switch, rebuild lag only when needed
Neta Ostrovsky <[email protected]>
net/mlx5: Update error handler for UCTX and UMEM
Valentine Fatiev <[email protected]>
net/mlx5e: nullify cq->dbg pointer in mlx5_debug_cq_remove()
Paul Blakey <[email protected]>
net/mlx5: E-Switch, Fix resetting of encap mode when entering switchdev
Vlad Buslov <[email protected]>
net/mlx5e: Wait for concurrent flow deletion during neigh/fib events
Tariq Toukan <[email protected]>
net/mlx5e: kTLS, Fix crash in RX resync flow
Leon Romanovsky <[email protected]>
RDMA/core: Set send and receive CQ before forwarding to the driver
Colin Ian King <[email protected]>
btrfs: make 1-bit bit-fields of scrub_page unsigned int
Cong Wang <[email protected]>
udp: Validate checksum in udp_read_sock()
Alex Williamson <[email protected]>
platform/x86: think-lmi: Abort probe on analyze failure
Christophe JAILLET <[email protected]>
platform/x86: hp_accel: Fix an error handling path in 'lis3lv02d_probe()'
Randy Dunlap <[email protected]>
gpio: rockchip: needs GENERIC_IRQ_CHIP to fix build errors
Randy Dunlap <[email protected]>
mips: lantiq: add support for clk_get_parent()
Randy Dunlap <[email protected]>
mips: bcm63xx: add support for clk_get_parent()
Colin Ian King <[email protected]>
MIPS: generic/yamon-dt: fix uninitialized variable error
Daniel Borkmann <[email protected]>
bpf: Fix toctou on read-only map's constant scalar tracking
Akeem G Abodunrin <[email protected]>
iavf: Restore VLAN filters after link down
Grzegorz Szczurek <[email protected]>
iavf: Fix for setting queues to 0
Surabhi Boob <[email protected]>
iavf: Fix for the false positive ASQ/ARQ errors while issuing VF reset
Mitch Williams <[email protected]>
iavf: validate pointers
Jacob Keller <[email protected]>
iavf: prevent accidental free of filter structure
Piotr Marczak <[email protected]>
iavf: Fix failure to exit out from last all-multicast mode
Nicholas Nunley <[email protected]>
iavf: don't clear a lock we don't hold
Nicholas Nunley <[email protected]>
iavf: free q_vectors before queues in iavf_disable_vf
Nicholas Nunley <[email protected]>
iavf: check for null in iavf_fix_features
Mateusz Palczewski <[email protected]>
iavf: Fix return of set the new channel count
Chuck Lever <[email protected]>
NFSD: Fix exposure in nfsd4_decode_bitmap()
Wen Gu <[email protected]>
net/smc: Make sure the link_id is unique
Tetsuo Handa <[email protected]>
sock: fix /proc/net/sockstat underflow in sk_clone_lock()
Xin Long <[email protected]>
tipc: only accept encrypted MSG_CRYPTO msgs
Sriharsha Basavapatna <[email protected]>
bnxt_en: reject indirect blk offload when hw-tc-offload is off
Pavel Skripkin <[email protected]>
net: bnx2x: fix variable dereferenced before check
Li Zhijian <[email protected]>
selftests: gpio: fix gpio compiling error
Alex Elder <[email protected]>
net: ipa: disable HOLB drop when updating timer
Alex Elder <[email protected]>
net: ipa: HOLB register sometimes must be written twice
Johannes Berg <[email protected]>
mac80211: fix monitor_sdata RCU/locking assertions
Johannes Berg <[email protected]>
nl80211: fix radio statistics in survey dump
Steven Rostedt (VMware) <[email protected]>
tracing: Add length protection to histogram string copies
Arjun Roy <[email protected]>
tcp: Fix uninitialized access in skb frags array for Rx 0cp.
Konrad Dybcio <[email protected]>
net/ipa: ipa_resource: Fix wrong for loop range
Jakub Kicinski <[email protected]>
selftests: net: switch to socat in the GSO GRE test
Kumar Kartikeya Dwivedi <[email protected]>
samples/bpf: Fix incorrect use of strlen in xdp_redirect_cpu
Alexander Lobakin <[email protected]>
samples/bpf: Fix summary per-sec stats in xdp_sample_user
Alexei Starovoitov <[email protected]>
bpf: Fix inner map state pruning regression.
Hans Verkuil <[email protected]>
drm/nouveau: hdmigv100.c: fix corrupted HDMI Vendor InfoFrame
James Clark <[email protected]>
perf tests: Remove bash construct from record+zstd_comp_decomp.sh
Sohaib Mohamed <[email protected]>
perf bench futex: Fix memory leak of perf_cpu_map__new()
Ian Rogers <[email protected]>
perf bpf: Avoid memory leak from perf_env__insert_btf()
Masami Hiramatsu <[email protected]>
tracing/histogram: Do not copy the fixed-size char array field over the field size
Laibin Qiu <[email protected]>
blkcg: Remove extra blkcg_bio_issue_init
Like Xu <[email protected]>
perf/x86/vlbr: Add c->flags to vlbr event constraints
Mathias Krause <[email protected]>
sched/fair: Prevent dead task groups from regaining cfs_rq's
Vincent Donnefort <[email protected]>
sched/core: Mitigate race cpus_share_cache()/update_top_cache_domain()
Randy Dunlap <[email protected]>
MIPS: boot/compressed/: add __bswapdi2() to target for ZSTD decompression
Randy Dunlap <[email protected]>
mips: BCM63XX: ensure that CPU_SUPPORTS_32BIT_KERNEL is set
Quentin Perret <[email protected]>
KVM: arm64: Fix host stage-2 finalization
Dmitry Baryshkov <[email protected]>
clk: qcom: gcc-msm8996: Drop (again) gcc_aggre1_pnoc_ahb_clk
Joel Stanley <[email protected]>
clk/ast2600: Fix soc revision for AHB
Paul Cercueil <[email protected]>
clk: ingenic: Fix bugs with divided dividers
Chao Yu <[email protected]>
f2fs: fix incorrect return value in f2fs_sanity_check_ckpt()
Hyeong-Jun Kim <[email protected]>
f2fs: compress: disallow disabling compress on non-empty compressed file
Randy Dunlap <[email protected]>
sh: define __BIG_ENDIAN for math-emu
Randy Dunlap <[email protected]>
sh: math-emu: drop unused functions
Randy Dunlap <[email protected]>
sh: fix kconfig unmet dependency warning for FRAME_POINTER
Chao Yu <[email protected]>
f2fs: fix wrong condition to trigger background checkpoint correctly
Keoseong Park <[email protected]>
f2fs: fix to use WHINT_MODE
Gao Xiang <[email protected]>
f2fs: fix up f2fs_lookup tracepoints
Lu Wei <[email protected]>
maple: fix wrong return value of maple_bus_init().
Nick Desaulniers <[email protected]>
sh: check return code of request_irq
Christophe Leroy <[email protected]>
powerpc/8xx: Fix Oops with STRICT_KERNEL_RWX without DEBUG_RODATA_TEST
Michael Ellerman <[email protected]>
powerpc/dcr: Use cmplwi instead of 3-argument cmpli
Sven Peter <[email protected]>
iommu/dart: Initialize DART_STREAMS_ENABLE
Claudiu Beznea <[email protected]>
clk: at91: sama7g5: remove prescaler part of master clock
Chengfeng Ye <[email protected]>
ALSA: usb-audio: fix null pointer dereference on pointer cs_desc
Chengfeng Ye <[email protected]>
ALSA: gus: fix null pointer dereference on pointer block
Stephan Gerhold <[email protected]>
arm64: dts: qcom: Fix node name of rpm-msg-ram device nodes
David Heidelberg <[email protected]>
ARM: dts: qcom: fix memory and mdio nodes naming for RB3011
Anatolij Gustschin <[email protected]>
powerpc/5200: dts: fix memory node unit name
Dmitry Osipenko <[email protected]>
memory: tegra20-emc: Add runtime dependency on devfreq governor module
James Smart <[email protected]>
scsi: lpfc: Allow fabric node recovery if recovery is in progress before devloss
James Smart <[email protected]>
scsi: lpfc: Fix link down processing to address NULL pointer dereference
James Smart <[email protected]>
scsi: lpfc: Fix use-after-free in lpfc_unreg_rpi() routine
wangyugui <[email protected]>
RDMA/core: Use kvzalloc when allocating the struct ib_port
Teng Qi <[email protected]>
iio: imu: st_lsm6dsx: Avoid potential array overflow in st_lsm6dsx_set_odr()
Mike Christie <[email protected]>
scsi: target: Fix alua_tg_pt_gps_count tracking
Mike Christie <[email protected]>
scsi: target: Fix ordered tag handling
Ye Bin <[email protected]>
scsi: scsi_debug: Fix out-of-bound read in resp_report_tgtpgs()
Ye Bin <[email protected]>
scsi: scsi_debug: Fix out-of-bound read in resp_readcap16()
Bart Van Assche <[email protected]>
MIPS: sni: Fix the build
Guanghui Feng <[email protected]>
tty: tty_buffer: Fix the softlockup issue in flush_to_ldisc
Tvrtko Ursulin <[email protected]>
iommu/vt-d: Do not falsely log intel_iommu is unsupported kernel option
Randy Dunlap <[email protected]>
ALSA: ISA: not for M68K
Li Yang <[email protected]>
ARM: dts: ls1021a-tsn: use generic "jedec,spi-nor" compatible for flash
Li Yang <[email protected]>
ARM: dts: ls1021a: move thermal-zones node out of soc/
Derek Fang <[email protected]>
ASoC: rt5682: fix a little pop while playback
Yang Yingliang <[email protected]>
usb: host: ohci-tmio: check return value after calling platform_get_resource()
Roger Quadros <[email protected]>
ARM: dts: omap: fix gpmc,mux-add-data type
William Overton <[email protected]>
ALSA: usb-audio: Add support for the Pioneer DJM 750MK2 Mixer/Soundcard
José Expósito <[email protected]>
HID: multitouch: disable sticky fingers for UPERFECT Y
Dmitry Osipenko <[email protected]>
cpuidle: tegra: Check whether PMC is ready
Luis Chamberlain <[email protected]>
firmware_loader: fix pre-allocated buf built-in firmware use
Pierre-Louis Bossart <[email protected]>
ASoC: Intel: sof_sdw: add missing quirk for Dell SKU 0A45
Pierre-Louis Bossart <[email protected]>
ASoC: Intel: soc-acpi: add missing quirk for TGL SDCA single amp
Pierre-Louis Bossart <[email protected]>
ALSA: intel-dsp-config: add quirk for APL/GLK/TGL devices based on ES8336 codec
Frieder Schrempf <[email protected]>
arm64: dts: imx8mm-kontron: Fix reset delays for ethernet PHY
Mahesh Rajashekhara <[email protected]>
scsi: smartpqi: Add controller handshake during kdump
Guo Zhi <[email protected]>
scsi: advansys: Fix kernel pointer leak
Hans de Goede <[email protected]>
ASoC: nau8824: Add DMI quirk mechanism for active-high jack-detect
Hans de Goede <[email protected]>
ASoC: rt5651: Use IRQF_NO_AUTOEN when requesting the IRQ
Hans de Goede <[email protected]>
ASoC: es8316: Use IRQF_NO_AUTOEN when requesting the IRQ
Stefan Riedmueller <[email protected]>
clk: imx: imx6ul: Move csi_sel mux to correct base register
Geraldo Nascimento <[email protected]>
ALSA: usb-audio: disable implicit feedback sync for Behringer UFX1204 and UFX1604
Damien Le Moal <[email protected]>
scsi: core: Fix scsi_mode_sense() buffer length handling
Pierre-Louis Bossart <[email protected]>
ASoC: SOF: Intel: hda-dai: fix potential locking issue
Bob Pearson <[email protected]>
RDMA/rxe: Separate HW and SW l/rkeys
Kuldeep Singh <[email protected]>
arm64: dts: ls1012a: Add serial alias for ls1012a-rdb
Michael Walle <[email protected]>
arm64: dts: freescale: fix arm,sp805 compatible string
Stephan Gerhold <[email protected]>
arm64: dts: qcom: msm8916: Add unit name for /soc node
Shawn Guo <[email protected]>
arm64: dts: qcom: sdm845: Fix qcom,controlled-remotely property
Shawn Guo <[email protected]>
arm64: dts: qcom: ipq8074: Fix qcom,controlled-remotely property
Shawn Guo <[email protected]>
arm64: dts: qcom: ipq6018: Fix qcom,controlled-remotely property
AngeloGioacchino Del Regno <[email protected]>
arm64: dts: qcom: msm8998: Fix CPU/L2 idle state latency and residency
Christian Lamparter <[email protected]>
ARM: BCM53016: Specify switch ports for Meraki MR32
Hans de Goede <[email protected]>
staging: rtl8723bs: remove a third possible deadlock
Hans de Goede <[email protected]>
staging: rtl8723bs: remove a second possible deadlock
Fabio Aiuto <[email protected]>
staging: rtl8723bs: remove possible deadlock when disconnect (v2)
Linus Walleij <[email protected]>
ARM: dts: ux500: Skomer regulator fixes
Sven Peter <[email protected]>
usb: typec: tipd: Remove WARN_ON in tps6598x_block_read
Yang Yingliang <[email protected]>
usb: musb: tusb6010: check return value after calling platform_get_resource()
Tony Lindgren <[email protected]>
bus: ti-sysc: Use context lost quirk for otg
Tony Lindgren <[email protected]>
bus: ti-sysc: Add quirk handling for reinit on context lost
Selvin Xavier <[email protected]>
RDMA/bnxt_re: Check if the vlan is valid before reporting
Michael Walle <[email protected]>
arm64: dts: hisilicon: fix arm,sp805 compatible string
Matthias Brugger <[email protected]>
arm64: dts: rockchip: Disable CDN DP on Pinebook Pro
Bixuan Cui <[email protected]>
ASoC: mediatek: mt8195: Add missing of_node_put()
James Smart <[email protected]>
scsi: lpfc: Fix list_add() corruption in lpfc_drain_txq()
Ajish Koshy <[email protected]>
scsi: pm80xx: Fix memory leak during rmmod
Rafał Miłecki <[email protected]>
arm64: dts: broadcom: bcm4908: Move reboot syscon out of bus
Matthew Hagan <[email protected]>
ARM: dts: NSP: Fix mpcore, mmc node names
Rafał Miłecki <[email protected]>
ARM: dts: BCM5301X: Fix MDIO mux binding
Rafał Miłecki <[email protected]>
ARM: dts: BCM5301X: Fix nodes names
Jérôme Pouiller <[email protected]>
staging: wfx: ensure IRQ is ready before enabling it
Maxime Ripard <[email protected]>
arm64: dts: allwinner: a100: Fix thermal zone node name
Maxime Ripard <[email protected]>
arm64: dts: allwinner: h5: Fix GPU thermal zone node name
Maxime Ripard <[email protected]>
ARM: dts: sunxi: Fix OPPs node name
Samuel Holland <[email protected]>
clk: sunxi-ng: Unregister clocks/resets when unbinding
Michal Simek <[email protected]>
arm64: zynqmp: Fix serial compatible string
Amit Kumar Mahapatra <[email protected]>
arm64: zynqmp: Do not duplicate flash partition label property
-------------
Diffstat:
Makefile | 4 +-
arch/arc/kernel/process.c | 2 +-
arch/arm/Kconfig | 1 +
arch/arm/boot/dts/bcm-nsp.dtsi | 4 +-
arch/arm/boot/dts/bcm47094-linksys-panamera.dts | 2 +-
arch/arm/boot/dts/bcm53016-meraki-mr32.dts | 22 +++
arch/arm/boot/dts/bcm5301x.dtsi | 10 +-
arch/arm/boot/dts/ls1021a-tsn.dts | 2 +-
arch/arm/boot/dts/ls1021a.dtsi | 66 +++----
arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi | 2 +-
arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi | 2 +-
arch/arm/boot/dts/qcom-ipq8064-rb3011.dts | 6 +-
arch/arm/boot/dts/ste-ux500-samsung-skomer.dts | 8 +-
arch/arm/boot/dts/sun8i-a33.dtsi | 4 +-
arch/arm/boot/dts/sun8i-a83t.dtsi | 4 +-
arch/arm/boot/dts/sun8i-h3.dtsi | 4 +-
arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi | 6 +-
.../boot/dts/allwinner/sun50i-a64-cpu-opp.dtsi | 2 +-
.../boot/dts/allwinner/sun50i-h5-cpu-opp.dtsi | 2 +-
arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi | 2 +-
.../boot/dts/allwinner/sun50i-h6-cpu-opp.dtsi | 2 +-
arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi | 12 +-
arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts | 1 +
arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 16 +-
arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 16 +-
.../boot/dts/freescale/imx8mm-kontron-n801x-s.dts | 4 +-
arch/arm64/boot/dts/hisilicon/hi3660.dtsi | 4 +-
arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 2 +-
arch/arm64/boot/dts/qcom/ipq6018.dtsi | 2 +-
arch/arm64/boot/dts/qcom/ipq8074.dtsi | 2 +-
arch/arm64/boot/dts/qcom/msm8916.dtsi | 4 +-
arch/arm64/boot/dts/qcom/msm8994.dtsi | 2 +-
arch/arm64/boot/dts/qcom/msm8996.dtsi | 2 +-
arch/arm64/boot/dts/qcom/msm8998.dtsi | 22 ++-
arch/arm64/boot/dts/qcom/qcs404.dtsi | 2 +-
arch/arm64/boot/dts/qcom/sdm630.dtsi | 2 +-
arch/arm64/boot/dts/qcom/sdm845.dtsi | 2 +-
arch/arm64/boot/dts/qcom/sm6125.dtsi | 2 +-
.../boot/dts/rockchip/rk3399-pinebook-pro.dts | 4 -
.../boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts | 4 +-
arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 4 +-
arch/arm64/kvm/hyp/nvhe/setup.c | 14 +-
arch/hexagon/include/asm/timer-regs.h | 26 ---
arch/hexagon/include/asm/timex.h | 3 +-
arch/hexagon/kernel/time.c | 12 +-
arch/hexagon/lib/io.c | 4 +
arch/m68k/kernel/traps.c | 2 +-
arch/mips/Kconfig | 3 +
arch/mips/bcm63xx/clk.c | 6 +
arch/mips/boot/compressed/Makefile | 6 +
arch/mips/generic/yamon-dt.c | 2 +-
arch/mips/lantiq/clk.c | 6 +
arch/mips/sni/time.c | 4 +-
arch/parisc/include/asm/rt_sigframe.h | 2 +-
arch/parisc/kernel/signal.c | 13 +-
arch/parisc/kernel/signal32.h | 2 +-
arch/powerpc/boot/dts/charon.dts | 2 +-
arch/powerpc/boot/dts/digsy_mtc.dts | 2 +-
arch/powerpc/boot/dts/lite5200.dts | 2 +-
arch/powerpc/boot/dts/lite5200b.dts | 2 +-
arch/powerpc/boot/dts/media5200.dts | 2 +-
arch/powerpc/boot/dts/mpc5200b.dtsi | 2 +-
arch/powerpc/boot/dts/o2d.dts | 2 +-
arch/powerpc/boot/dts/o2d.dtsi | 2 +-
arch/powerpc/boot/dts/o2dnt2.dts | 2 +-
arch/powerpc/boot/dts/o3dnt.dts | 2 +-
arch/powerpc/boot/dts/pcm032.dts | 2 +-
arch/powerpc/boot/dts/tqm5200.dts | 2 +-
arch/powerpc/kernel/Makefile | 3 +
arch/powerpc/kernel/head_8xx.S | 13 +-
arch/powerpc/kernel/signal.h | 10 +-
arch/powerpc/kernel/signal_32.c | 6 +-
arch/powerpc/kernel/signal_64.c | 9 +-
arch/powerpc/kernel/watchdog.c | 6 +
arch/powerpc/kvm/book3s_hv_rmhandlers.S | 4 +-
arch/powerpc/mm/numa.c | 44 +++--
arch/powerpc/sysdev/dcr-low.S | 2 +-
arch/powerpc/sysdev/xive/Kconfig | 1 -
arch/powerpc/sysdev/xive/common.c | 3 +-
arch/riscv/Makefile | 2 +
arch/s390/Kconfig | 2 +-
arch/s390/Makefile | 10 +-
arch/s390/boot/startup.c | 88 ++++------
arch/s390/include/asm/kexec.h | 6 +
arch/s390/kernel/crash_dump.c | 4 +-
arch/s390/kernel/ipl.c | 3 +-
arch/s390/kernel/machine_kexec_file.c | 18 +-
arch/s390/kernel/setup.c | 10 +-
arch/s390/kernel/traps.c | 2 +-
arch/s390/kernel/vdso64/Makefile | 5 +-
arch/sh/Kconfig.debug | 1 +
arch/sh/include/asm/sfp-machine.h | 8 +
arch/sh/kernel/cpu/sh4a/smp-shx3.c | 5 +-
arch/sh/math-emu/math.c | 103 -----------
arch/sparc/kernel/signal_32.c | 4 +-
arch/sparc/kernel/windows.c | 6 +-
arch/um/kernel/trap.c | 2 +-
arch/x86/Kconfig | 3 +-
arch/x86/entry/vsyscall/vsyscall_64.c | 3 +-
arch/x86/events/intel/core.c | 4 +-
arch/x86/events/intel/uncore_snbep.c | 12 ++
arch/x86/hyperv/hv_init.c | 3 +
arch/x86/include/asm/kvm_host.h | 1 +
arch/x86/kernel/cpu/sgx/main.c | 12 +-
arch/x86/kernel/setup.c | 66 ++++---
arch/x86/kernel/vm86_32.c | 4 +-
arch/x86/kvm/hyperv.c | 4 +-
arch/x86/kvm/mmu/mmu.c | 1 +
arch/x86/kvm/svm/sev.c | 7 +-
arch/x86/kvm/vmx/nested.c | 22 ++-
arch/x86/kvm/x86.c | 10 +-
arch/x86/kvm/x86.h | 12 ++
arch/x86/kvm/xen.c | 4 +-
block/blk-cgroup.c | 9 +-
block/blk-core.c | 4 +-
block/ioprio.c | 9 +-
drivers/ata/libata-core.c | 11 +-
drivers/base/firmware_loader/main.c | 13 +-
drivers/bus/ti-sysc.c | 110 +++++++++++-
drivers/clk/at91/sama7g5.c | 11 +-
drivers/clk/clk-ast2600.c | 12 +-
drivers/clk/imx/clk-imx6ul.c | 2 +-
drivers/clk/ingenic/cgu.c | 6 +-
drivers/clk/qcom/gcc-msm8996.c | 15 --
drivers/clk/sunxi-ng/ccu-sun4i-a10.c | 2 +-
drivers/clk/sunxi-ng/ccu-sun50i-a100-r.c | 2 +-
drivers/clk/sunxi-ng/ccu-sun50i-a100.c | 2 +-
drivers/clk/sunxi-ng/ccu-sun50i-a64.c | 2 +-
drivers/clk/sunxi-ng/ccu-sun50i-h6-r.c | 2 +-
drivers/clk/sunxi-ng/ccu-sun50i-h6.c | 2 +-
drivers/clk/sunxi-ng/ccu-sun50i-h616.c | 4 +-
drivers/clk/sunxi-ng/ccu-sun5i.c | 2 +-
drivers/clk/sunxi-ng/ccu-sun6i-a31.c | 2 +-
drivers/clk/sunxi-ng/ccu-sun8i-a23.c | 2 +-
drivers/clk/sunxi-ng/ccu-sun8i-a33.c | 2 +-
drivers/clk/sunxi-ng/ccu-sun8i-a83t.c | 2 +-
drivers/clk/sunxi-ng/ccu-sun8i-de2.c | 2 +-
drivers/clk/sunxi-ng/ccu-sun8i-h3.c | 2 +-
drivers/clk/sunxi-ng/ccu-sun8i-r.c | 2 +-
drivers/clk/sunxi-ng/ccu-sun8i-r40.c | 2 +-
drivers/clk/sunxi-ng/ccu-sun8i-v3s.c | 2 +-
drivers/clk/sunxi-ng/ccu-sun9i-a80-de.c | 3 +-
drivers/clk/sunxi-ng/ccu-sun9i-a80-usb.c | 3 +-
drivers/clk/sunxi-ng/ccu-sun9i-a80.c | 2 +-
drivers/clk/sunxi-ng/ccu-suniv-f1c100s.c | 2 +-
drivers/clk/sunxi-ng/ccu_common.c | 89 ++++++++--
drivers/clk/sunxi-ng/ccu_common.h | 6 +-
drivers/cpuidle/cpuidle-tegra.c | 3 +
drivers/dma/xilinx/xilinx_dpdma.c | 15 +-
drivers/gpio/Kconfig | 1 +
drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c | 1 +
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 3 +
.../drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c | 35 ++++
.../gpu/drm/amd/display/dc/dcn20/dcn20_resource.c | 4 +-
.../drm/amd/display/dc/dml/display_mode_enums.h | 4 +-
drivers/gpu/drm/amd/include/amd_shared.h | 3 +-
drivers/gpu/drm/amd/pm/amdgpu_dpm.c | 10 ++
drivers/gpu/drm/amd/pm/inc/amdgpu_dpm.h | 8 +
drivers/gpu/drm/drm_gem_cma_helper.c | 9 +-
drivers/gpu/drm/drm_prime.c | 6 +-
drivers/gpu/drm/i915/display/icl_dsi.c | 10 +-
drivers/gpu/drm/i915/display/intel_bios.c | 85 ++++++---
drivers/gpu/drm/i915/display/intel_dp.c | 29 +++-
drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c | 154 ++++++++++-------
drivers/gpu/drm/nouveau/nouveau_drm.c | 42 ++++-
drivers/gpu/drm/nouveau/nouveau_drv.h | 5 +
.../gpu/drm/nouveau/nvkm/engine/disp/hdmigv100.c | 1 -
drivers/gpu/drm/udl/udl_connector.c | 2 +-
drivers/hid/hid-ids.h | 3 +
drivers/hid/hid-multitouch.c | 13 ++
drivers/hv/hv_balloon.c | 2 +-
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 6 +-
drivers/infiniband/core/sysfs.c | 4 +-
drivers/infiniband/core/verbs.c | 3 +
drivers/infiniband/hw/bnxt_re/ib_verbs.c | 12 +-
drivers/infiniband/hw/mlx4/main.c | 18 +-
drivers/infiniband/sw/rxe/rxe_loc.h | 1 +
drivers/infiniband/sw/rxe/rxe_mr.c | 69 ++++++--
drivers/infiniband/sw/rxe/rxe_mw.c | 30 ++--
drivers/infiniband/sw/rxe/rxe_req.c | 14 +-
drivers/infiniband/sw/rxe/rxe_verbs.h | 18 +-
drivers/iommu/apple-dart.c | 5 +
drivers/iommu/intel/iommu.c | 6 +-
drivers/memory/tegra/tegra20-emc.c | 1 +
.../net/ethernet/broadcom/bnx2x/bnx2x_init_ops.h | 4 +-
drivers/net/ethernet/broadcom/bnxt/bnxt_tc.c | 2 +-
drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c | 4 +-
drivers/net/ethernet/intel/e100.c | 18 +-
drivers/net/ethernet/intel/i40e/i40e.h | 2 +
drivers/net/ethernet/intel/i40e/i40e_main.c | 160 +++++++++++------
drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 121 +++++--------
drivers/net/ethernet/intel/iavf/iavf.h | 1 +
drivers/net/ethernet/intel/iavf/iavf_ethtool.c | 30 +++-
drivers/net/ethernet/intel/iavf/iavf_main.c | 55 ++++--
drivers/net/ethernet/intel/ice/ice.h | 5 +-
drivers/net/ethernet/intel/ice/ice_main.c | 3 -
drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c | 78 ++++-----
drivers/net/ethernet/marvell/mvmdio.c | 2 +
drivers/net/ethernet/mellanox/mlx5/core/cmd.c | 4 +-
drivers/net/ethernet/mellanox/mlx5/core/cq.c | 5 +-
drivers/net/ethernet/mellanox/mlx5/core/debugfs.c | 4 +-
drivers/net/ethernet/mellanox/mlx5/core/en/tc_ct.c | 26 ++-
drivers/net/ethernet/mellanox/mlx5/core/en/tc_ct.h | 2 +
.../net/ethernet/mellanox/mlx5/core/en/tc_priv.h | 1 +
.../ethernet/mellanox/mlx5/core/en/tc_tun_encap.c | 8 +-
.../ethernet/mellanox/mlx5/core/en_accel/ktls_rx.c | 23 ++-
drivers/net/ethernet/mellanox/mlx5/core/en_tc.c | 10 +-
drivers/net/ethernet/mellanox/mlx5/core/eswitch.c | 21 ++-
.../ethernet/mellanox/mlx5/core/eswitch_offloads.c | 9 +-
drivers/net/ethernet/mellanox/mlx5/core/lag.c | 28 ++-
.../net/ethernet/stmicro/stmmac/dwmac-socfpga.c | 24 ++-
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 23 ++-
drivers/net/ipa/ipa_endpoint.c | 5 +
drivers/net/ipa/ipa_resource.c | 2 +-
drivers/net/tun.c | 5 +
drivers/pinctrl/qcom/pinctrl-sdm845.c | 1 +
drivers/pinctrl/qcom/pinctrl-sm8350.c | 8 +-
drivers/pinctrl/ralink/pinctrl-mt7620.c | 1 +
drivers/platform/x86/hp_accel.c | 2 +
drivers/platform/x86/think-lmi.c | 13 +-
drivers/platform/x86/think-lmi.h | 1 -
drivers/ptp/ptp_ocp.c | 9 +-
drivers/scsi/advansys.c | 4 +-
drivers/scsi/lpfc/lpfc_crtn.h | 2 +
drivers/scsi/lpfc/lpfc_disc.h | 12 +-
drivers/scsi/lpfc/lpfc_els.c | 7 +-
drivers/scsi/lpfc/lpfc_hbadisc.c | 112 +++++++++++-
drivers/scsi/lpfc/lpfc_init.c | 12 +-
drivers/scsi/lpfc/lpfc_scsi.c | 10 +-
drivers/scsi/lpfc/lpfc_sli.c | 15 +-
drivers/scsi/pm8001/pm8001_init.c | 11 ++
drivers/scsi/pm8001/pm8001_sas.h | 1 +
drivers/scsi/qla2xxx/qla_mbx.c | 6 +-
drivers/scsi/scsi_debug.c | 11 +-
drivers/scsi/scsi_lib.c | 25 +--
drivers/scsi/scsi_sysfs.c | 30 ++--
drivers/scsi/smartpqi/smartpqi_init.c | 41 ++++-
drivers/scsi/smartpqi/smartpqi_sis.c | 51 ++++++
drivers/scsi/smartpqi/smartpqi_sis.h | 1 +
drivers/scsi/ufs/ufshcd.c | 9 +-
drivers/sh/maple/maple.c | 5 +-
drivers/spi/spi.c | 12 +-
drivers/staging/rtl8723bs/core/rtw_mlme.c | 12 +-
drivers/staging/rtl8723bs/core/rtw_mlme_ext.c | 11 +-
drivers/staging/rtl8723bs/core/rtw_recv.c | 10 +-
drivers/staging/rtl8723bs/core/rtw_sta_mgt.c | 33 ++--
drivers/staging/rtl8723bs/core/rtw_xmit.c | 16 +-
drivers/staging/rtl8723bs/hal/rtl8723bs_xmit.c | 2 -
drivers/staging/rtl8723bs/os_dep/ioctl_linux.c | 2 -
drivers/staging/wfx/bus_sdio.c | 17 +-
drivers/target/target_core_alua.c | 1 -
drivers/target/target_core_device.c | 2 +
drivers/target/target_core_internal.h | 1 +
drivers/target/target_core_transport.c | 76 ++++++---
drivers/tty/tty_buffer.c | 3 +
drivers/usb/host/max3421-hcd.c | 25 +--
drivers/usb/host/ohci-tmio.c | 2 +-
drivers/usb/musb/tusb6010.c | 5 +
drivers/usb/typec/tipd/core.c | 2 +-
drivers/video/console/sticon.c | 12 +-
drivers/video/fbdev/efifb.c | 11 ++
drivers/video/fbdev/simplefb.c | 11 ++
fs/attr.c | 4 +-
fs/btrfs/async-thread.c | 14 ++
fs/btrfs/scrub.c | 4 +-
fs/btrfs/volumes.c | 21 ++-
fs/exec.c | 2 +-
fs/f2fs/f2fs.h | 3 +-
fs/f2fs/segment.c | 2 +-
fs/f2fs/super.c | 4 +-
fs/inode.c | 7 +-
fs/nfsd/nfs4xdr.c | 7 +-
fs/pstore/Kconfig | 1 -
fs/pstore/blk.c | 2 +-
fs/udf/dir.c | 32 +++-
fs/udf/namei.c | 3 +
fs/udf/super.c | 2 +
include/linux/bpf.h | 3 +-
include/linux/dmaengine.h | 2 -
include/linux/fs.h | 2 +
include/linux/ipc_namespace.h | 15 ++
include/linux/mlx5/eswitch.h | 4 +-
include/linux/platform_data/ti-sysc.h | 1 +
include/linux/printk.h | 4 +
include/linux/sched/signal.h | 2 +
include/linux/sched/task.h | 2 +-
include/linux/skbuff.h | 16 ++
include/linux/trace_events.h | 2 +-
include/linux/virtio_net.h | 7 +-
include/net/nfc/nci_core.h | 1 +
include/rdma/rdma_netlink.h | 2 +-
include/target/target_core_base.h | 6 +-
include/trace/events/f2fs.h | 12 +-
ipc/shm.c | 189 ++++++++++++++++-----
ipc/util.c | 6 +-
kernel/bpf/cgroup.c | 2 +
kernel/bpf/helpers.c | 2 -
kernel/bpf/syscall.c | 57 ++++---
kernel/bpf/verifier.c | 27 ++-
kernel/entry/syscall_user_dispatch.c | 12 +-
kernel/printk/printk.c | 5 +
kernel/sched/autogroup.c | 2 +-
kernel/sched/core.c | 47 ++++-
kernel/sched/fair.c | 4 +-
kernel/sched/rt.c | 12 +-
kernel/sched/sched.h | 3 +-
kernel/signal.c | 60 +++++--
kernel/trace/bpf_trace.c | 2 -
kernel/trace/trace_events_hist.c | 14 +-
lib/nmi_backtrace.c | 6 +
mm/Kconfig | 3 +
mm/damon/dbgfs.c | 15 +-
mm/highmem.c | 32 ++--
mm/hugetlb.c | 30 +++-
mm/slab.h | 2 +-
net/core/filter.c | 6 +
net/core/skbuff.c | 14 +-
net/core/sock.c | 6 +-
net/ipv4/bpf_tcp_ca.c | 2 +
net/ipv4/tcp.c | 3 +
net/ipv4/tcp_output.c | 6 +-
net/ipv4/udp.c | 11 ++
net/mac80211/cfg.c | 12 +-
net/mac80211/iface.c | 4 +-
net/mac80211/rx.c | 2 +-
net/mac80211/util.c | 7 +-
net/mac80211/wme.c | 3 +-
net/nfc/core.c | 32 ++--
net/nfc/nci/core.c | 30 +++-
net/sched/act_mirred.c | 11 +-
net/smc/smc_core.c | 3 +-
net/tipc/crypto.c | 4 +
net/tipc/link.c | 7 +-
net/wireless/nl80211.c | 34 ++--
net/wireless/nl80211.h | 6 +-
net/wireless/util.c | 1 +
samples/bpf/xdp_redirect_cpu_user.c | 5 +-
samples/bpf/xdp_sample_user.c | 28 +--
security/selinux/ss/hashtab.c | 17 +-
sound/core/Makefile | 2 +
sound/hda/intel-dsp-config.c | 22 ++-
sound/isa/Kconfig | 2 +-
sound/isa/gus/gus_dma.c | 2 +
sound/pci/Kconfig | 1 +
sound/soc/codecs/es8316.c | 7 +-
sound/soc/codecs/nau8824.c | 40 +++++
sound/soc/codecs/rt5651.c | 7 +-
sound/soc/codecs/rt5682.c | 56 +++++-
sound/soc/codecs/rt5682.h | 20 +++
sound/soc/intel/boards/sof_sdw.c | 10 ++
sound/soc/intel/common/soc-acpi-intel-tgl-match.c | 41 +++++
.../mediatek/mt8195/mt8195-mt6359-rt1019-rt5682.c | 6 +-
sound/soc/sh/rcar/dma.c | 2 +-
sound/soc/soc-dapm.c | 29 +++-
sound/soc/sof/intel/hda-dai.c | 7 +-
sound/usb/clock.c | 4 +
sound/usb/implicit.c | 2 -
sound/usb/mixer_quirks.c | 34 ++++
sound/usb/quirks-table.h | 58 +++++++
tools/build/feature/test-all.c | 1 -
tools/perf/bench/futex-lock-pi.c | 1 +
tools/perf/bench/futex-requeue.c | 1 +
tools/perf/bench/futex-wake-parallel.c | 1 +
tools/perf/bench/futex-wake.c | 1 +
tools/perf/bench/sched-messaging.c | 4 +
tools/perf/tests/shell/record+zstd_comp_decomp.sh | 2 +-
tools/perf/util/bpf-event.c | 6 +-
tools/perf/util/env.c | 5 +-
tools/perf/util/env.h | 2 +-
tools/testing/selftests/gpio/Makefile | 1 +
tools/testing/selftests/net/gre_gso.sh | 16 +-
371 files changed, 3095 insertions(+), 1545 deletions(-)
From: Matthias Brugger <[email protected]>
[ Upstream commit 2513fa5c25d42f55ca5f0f0ab247af7c9fbfa3b1 ]
The CDN DP needs a PHY and a extcon to work correctly. But no extcon is
provided by the device-tree, which leads to an error:
cdn-dp fec00000.dp: [drm:cdn_dp_probe [rockchipdrm]] *ERROR* missing extcon or phy
cdn-dp: probe of fec00000.dp failed with error -22
Disable the CDN DP to make graphic work on the Pinebook Pro.
Reported-by: Guillaume Gardet <[email protected]>
Signed-off-by: Matthias Brugger <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Heiko Stuebner <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts | 4 ----
1 file changed, 4 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
index 2b5f001ff4a61..9e5d07f5712e6 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
@@ -385,10 +385,6 @@
};
};
-&cdn_dp {
- status = "okay";
-};
-
&cpu_b0 {
cpu-supply = <&vdd_cpu_b>;
};
--
2.33.0
From: Hans de Goede <[email protected]>
[ Upstream commit bdc1bbdbaa92df19a14d4c1902088c8432b46c6f ]
The assoc_timer takes the pmlmepriv->lock and various functions which
take the pmlmepriv->scanned_queue.lock first take the pmlmepriv->lock,
this means that we cannot have code which waits for the timer
(timer_del_sync) while holding the pmlmepriv->scanned_queue.lock
to avoid a triangle deadlock:
[ 363.139361] ======================================================
[ 363.139377] WARNING: possible circular locking dependency detected
[ 363.139396] 5.15.0-rc1+ #470 Tainted: G C E
[ 363.139413] ------------------------------------------------------
[ 363.139424] RTW_CMD_THREAD/2466 is trying to acquire lock:
[ 363.139441] ffffbacd00699038 (&pmlmepriv->lock){+.-.}-{2:2}, at: _rtw_join_timeout_handler+0x3c/0x160 [r8723bs]
[ 363.139598]
but task is already holding lock:
[ 363.139610] ffffbacd00128ea0 ((&pmlmepriv->assoc_timer)){+.-.}-{0:0}, at: call_timer_fn+0x5/0x260
[ 363.139673]
which lock already depends on the new lock.
[ 363.139684]
the existing dependency chain (in reverse order) is:
[ 363.139696]
-> #2 ((&pmlmepriv->assoc_timer)){+.-.}-{0:0}:
[ 363.139734] del_timer_sync+0x59/0x100
[ 363.139762] rtw_joinbss_event_prehandle+0x342/0x640 [r8723bs]
[ 363.139870] report_join_res+0xdf/0x110 [r8723bs]
[ 363.139980] OnAssocRsp+0x17a/0x200 [r8723bs]
[ 363.140092] rtw_recv_entry+0x190/0x1120 [r8723bs]
[ 363.140209] rtl8723b_process_phy_info+0x3f9/0x750 [r8723bs]
[ 363.140318] tasklet_action_common.constprop.0+0xe8/0x110
[ 363.140345] __do_softirq+0xde/0x485
[ 363.140372] __irq_exit_rcu+0xd0/0x100
[ 363.140393] irq_exit_rcu+0xa/0x20
[ 363.140413] common_interrupt+0x83/0xa0
[ 363.140440] asm_common_interrupt+0x1e/0x40
[ 363.140463] finish_task_switch.isra.0+0x157/0x3d0
[ 363.140492] __schedule+0x447/0x1880
[ 363.140516] schedule+0x59/0xc0
[ 363.140537] smpboot_thread_fn+0x161/0x1c0
[ 363.140565] kthread+0x143/0x160
[ 363.140585] ret_from_fork+0x22/0x30
[ 363.140614]
-> #1 (&pmlmepriv->scanned_queue.lock){+.-.}-{2:2}:
[ 363.140653] _raw_spin_lock_bh+0x34/0x40
[ 363.140675] rtw_free_network_queue+0x31/0x80 [r8723bs]
[ 363.140776] rtw_sitesurvey_cmd+0x79/0x1e0 [r8723bs]
[ 363.140869] rtw_cfg80211_surveydone_event_callback+0x3cf/0x470 [r8723bs]
[ 363.140973] rdev_scan+0x42/0x1a0 [cfg80211]
[ 363.141307] nl80211_trigger_scan+0x566/0x660 [cfg80211]
[ 363.141635] genl_family_rcv_msg_doit+0xcd/0x110
[ 363.141661] genl_rcv_msg+0xce/0x1c0
[ 363.141680] netlink_rcv_skb+0x50/0xf0
[ 363.141699] genl_rcv+0x24/0x40
[ 363.141717] netlink_unicast+0x16d/0x230
[ 363.141736] netlink_sendmsg+0x22b/0x450
[ 363.141755] sock_sendmsg+0x5e/0x60
[ 363.141781] ____sys_sendmsg+0x22f/0x270
[ 363.141803] ___sys_sendmsg+0x81/0xc0
[ 363.141828] __sys_sendmsg+0x49/0x80
[ 363.141851] do_syscall_64+0x3b/0x90
[ 363.141873] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 363.141895]
-> #0 (&pmlmepriv->lock){+.-.}-{2:2}:
[ 363.141930] __lock_acquire+0x1158/0x1de0
[ 363.141954] lock_acquire+0xb5/0x2b0
[ 363.141974] _raw_spin_lock_bh+0x34/0x40
[ 363.141993] _rtw_join_timeout_handler+0x3c/0x160 [r8723bs]
[ 363.142097] call_timer_fn+0x94/0x260
[ 363.142122] __run_timers.part.0+0x1bf/0x290
[ 363.142147] run_timer_softirq+0x26/0x50
[ 363.142171] __do_softirq+0xde/0x485
[ 363.142193] __irq_exit_rcu+0xd0/0x100
[ 363.142215] irq_exit_rcu+0xa/0x20
[ 363.142235] sysvec_apic_timer_interrupt+0x72/0x90
[ 363.142260] asm_sysvec_apic_timer_interrupt+0x12/0x20
[ 363.142283] __module_address.part.0+0x0/0xd0
[ 363.142309] is_module_address+0x25/0x40
[ 363.142334] static_obj+0x4f/0x60
[ 363.142361] lockdep_init_map_type+0x47/0x220
[ 363.142382] __init_swait_queue_head+0x45/0x60
[ 363.142408] mmc_wait_for_req+0x4a/0xc0 [mmc_core]
[ 363.142504] mmc_wait_for_cmd+0x55/0x70 [mmc_core]
[ 363.142592] mmc_io_rw_direct+0x75/0xe0 [mmc_core]
[ 363.142691] sdio_writeb+0x2e/0x50 [mmc_core]
[ 363.142788] _sd_cmd52_write+0x62/0x80 [r8723bs]
[ 363.142885] sd_cmd52_write+0x6c/0xb0 [r8723bs]
[ 363.142981] rtl8723bs_set_hal_ops+0x982/0x9b0 [r8723bs]
[ 363.143089] rtw_write16+0x1e/0x30 [r8723bs]
[ 363.143184] SetHwReg8723B+0xcc9/0xd30 [r8723bs]
[ 363.143294] mlmeext_joinbss_event_callback+0x17a/0x1a0 [r8723bs]
[ 363.143405] rtw_joinbss_event_callback+0x11/0x20 [r8723bs]
[ 363.143507] mlme_evt_hdl+0x4d/0x70 [r8723bs]
[ 363.143620] rtw_cmd_thread+0x168/0x3c0 [r8723bs]
[ 363.143712] kthread+0x143/0x160
[ 363.143732] ret_from_fork+0x22/0x30
[ 363.143757]
other info that might help us debug this:
[ 363.143768] Chain exists of:
&pmlmepriv->lock --> &pmlmepriv->scanned_queue.lock --> (&pmlmepriv->assoc_timer)
[ 363.143809] Possible unsafe locking scenario:
[ 363.143819] CPU0 CPU1
[ 363.143831] ---- ----
[ 363.143841] lock((&pmlmepriv->assoc_timer));
[ 363.143862] lock(&pmlmepriv->scanned_queue.lock);
[ 363.143882] lock((&pmlmepriv->assoc_timer));
[ 363.143902] lock(&pmlmepriv->lock);
[ 363.143921]
*** DEADLOCK ***
Make rtw_joinbss_event_prehandle() release the scanned_queue.lock before
it deletes the timer to avoid this (it is still holding pmlmepriv->lock
protecting against racing the timer).
Signed-off-by: Hans de Goede <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/rtl8723bs/core/rtw_mlme.c | 7 ++-----
1 file changed, 2 insertions(+), 5 deletions(-)
diff --git a/drivers/staging/rtl8723bs/core/rtw_mlme.c b/drivers/staging/rtl8723bs/core/rtw_mlme.c
index 1f49c49e10b45..cf79bec916c51 100644
--- a/drivers/staging/rtl8723bs/core/rtw_mlme.c
+++ b/drivers/staging/rtl8723bs/core/rtw_mlme.c
@@ -1234,16 +1234,13 @@ void rtw_joinbss_event_prehandle(struct adapter *adapter, u8 *pbuf)
rtw_indicate_connect(adapter);
}
+ spin_unlock_bh(&pmlmepriv->scanned_queue.lock);
+
/* s5. Cancel assoc_timer */
del_timer_sync(&pmlmepriv->assoc_timer);
-
} else {
spin_unlock_bh(&(pmlmepriv->scanned_queue.lock));
- goto ignore_joinbss_callback;
}
-
- spin_unlock_bh(&(pmlmepriv->scanned_queue.lock));
-
} else if (pnetwork->join_res == -4) {
rtw_reset_securitypriv(adapter);
_set_timer(&pmlmepriv->assoc_timer, 1);
--
2.33.0
From: Shawn Guo <[email protected]>
[ Upstream commit 3509de752ea14c7e5781b3a56a4a0bf832f5723a ]
Property qcom,controlled-remotely should be boolean. Fix it.
Signed-off-by: Shawn Guo <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/qcom/ipq6018.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index d2fe58e0eb7aa..7b6205c180df1 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -200,7 +200,7 @@
clock-names = "bam_clk";
#dma-cells = <1>;
qcom,ee = <1>;
- qcom,controlled-remotely = <1>;
+ qcom,controlled-remotely;
qcom,config-pipe-trust-reg = <0>;
};
--
2.33.0
From: AngeloGioacchino Del Regno <[email protected]>
[ Upstream commit 3f1dcaff642e75c1d2ad03f783fa8a3b1f56dd50 ]
The entry/exit latency and minimum residency in state for the idle
states of MSM8998 were ..bad: first of all, for all of them the
timings were written for CPU sleep but the min-residency-us param
was miscalculated (supposedly, while porting this from downstream);
Then, the power collapse states are setting PC on both the CPU
cluster *and* the L2 cache, which have different timings: in the
specific case of L2 the times are higher so these ones should be
taken into account instead of the CPU ones.
This parameter misconfiguration was not giving particular issues
because on MSM8998 there was no CPU scaling at all, so cluster/L2
power collapse was rarely (if ever) hit.
When CPU scaling is enabled, though, the wrong timings will produce
SoC unstability shown to the user as random, apparently error-less,
sudden reboots and/or lockups.
This set of parameters are stabilizing the SoC when CPU scaling is
ON and when power collapse is frequently hit.
Signed-off-by: AngeloGioacchino Del Regno <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/20210901183123.1087392-3-angelogioacchino.delregno@somainline.org
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/qcom/msm8998.dtsi | 20 ++++++++++++--------
1 file changed, 12 insertions(+), 8 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index 34039b5c80175..5a221cfc41387 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -308,38 +308,42 @@
LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
compatible = "arm,idle-state";
idle-state-name = "little-retention";
+ /* CPU Retention (C2D), L2 Active */
arm,psci-suspend-param = <0x00000002>;
entry-latency-us = <81>;
exit-latency-us = <86>;
- min-residency-us = <200>;
+ min-residency-us = <504>;
};
LITTLE_CPU_SLEEP_1: cpu-sleep-0-1 {
compatible = "arm,idle-state";
idle-state-name = "little-power-collapse";
+ /* CPU + L2 Power Collapse (C3, D4) */
arm,psci-suspend-param = <0x40000003>;
- entry-latency-us = <273>;
- exit-latency-us = <612>;
- min-residency-us = <1000>;
+ entry-latency-us = <814>;
+ exit-latency-us = <4562>;
+ min-residency-us = <9183>;
local-timer-stop;
};
BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
compatible = "arm,idle-state";
idle-state-name = "big-retention";
+ /* CPU Retention (C2D), L2 Active */
arm,psci-suspend-param = <0x00000002>;
entry-latency-us = <79>;
exit-latency-us = <82>;
- min-residency-us = <200>;
+ min-residency-us = <1302>;
};
BIG_CPU_SLEEP_1: cpu-sleep-1-1 {
compatible = "arm,idle-state";
idle-state-name = "big-power-collapse";
+ /* CPU + L2 Power Collapse (C3, D4) */
arm,psci-suspend-param = <0x40000003>;
- entry-latency-us = <336>;
- exit-latency-us = <525>;
- min-residency-us = <1000>;
+ entry-latency-us = <724>;
+ exit-latency-us = <2027>;
+ min-residency-us = <9419>;
local-timer-stop;
};
};
--
2.33.0
From: Christian Lamparter <[email protected]>
[ Upstream commit 6abc4ca5a28070945e0d68cb4160b309bfbf4b8b ]
the switch identifies itself as a BCM53012 (rev 5)...
This patch has been tested & verified on OpenWrt's
snapshot with Linux 5.10 (didn't test any older kernels).
The MR32 is able to "talk to the network" as before with
OpenWrt's SWITCHDEV b53 driver.
| b53-srab-switch 18007000.ethernet-switch: found switch: BCM53012, rev 5
| libphy: dsa slave smi: probed
| b53-srab-switch 18007000.ethernet-switch poe (uninitialized):
| PHY [dsa-0.0:00] driver [Generic PHY] (irq=POLL)
| b53-srab-switch 18007000.ethernet-switch: Using legacy PHYLIB callbacks.
| Please migrate to PHYLINK!
| DSA: tree 0 setup
Reported-by: Rafał Miłecki <[email protected]>
Signed-off-by: Christian Lamparter <[email protected]>
Signed-off-by: Florian Fainelli <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/bcm53016-meraki-mr32.dts | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
index 612d61852bfb9..577a4dc604d93 100644
--- a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
+++ b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
@@ -195,3 +195,25 @@
};
};
};
+
+&srab {
+ status = "okay";
+
+ ports {
+ port@0 {
+ reg = <0>;
+ label = "poe";
+ };
+
+ port@5 {
+ reg = <5>;
+ label = "cpu";
+ ethernet = <&gmac0>;
+
+ fixed-link {
+ speed = <1000>;
+ duplex-full;
+ };
+ };
+ };
+};
--
2.33.0
From: Shawn Guo <[email protected]>
[ Upstream commit 8c97f0ac4dc8f1743eb8e8a49f66189e13ae45e9 ]
Property qcom,controlled-remotely should be boolean. Fix it.
Signed-off-by: Shawn Guo <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/qcom/ipq8074.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index db333001df4d6..97f99663c132e 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -220,7 +220,7 @@
clock-names = "bam_clk";
#dma-cells = <1>;
qcom,ee = <1>;
- qcom,controlled-remotely = <1>;
+ qcom,controlled-remotely;
status = "disabled";
};
--
2.33.0
From: Stephan Gerhold <[email protected]>
[ Upstream commit 7a62bfebc8c94bdb6eb8f54f49889dc6b5b79601 ]
This fixes the following warning when building with W=1:
Warning (unit_address_vs_reg): /soc: node has a reg or ranges property,
but no unit name
Signed-off-by: Stephan Gerhold <[email protected]>
Reviewed-by: Stephen Boyd <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/qcom/msm8916.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index fbff712639513..519abec2430f0 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -414,7 +414,7 @@
};
};
- soc: soc {
+ soc: soc@0 {
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0 0 0xffffffff>;
--
2.33.0
From: Shawn Guo <[email protected]>
[ Upstream commit 1c8bf398b6b51eb085a49036ad8f9c000171cce1 ]
Property qcom,controlled-remotely should be boolean. Fix it.
Signed-off-by: Shawn Guo <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/qcom/sdm845.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index a810adc1a707f..519ca9a705b4f 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -2320,7 +2320,7 @@
clock-names = "bam_clk";
#dma-cells = <1>;
qcom,ee = <0>;
- qcom,controlled-remotely = <1>;
+ qcom,controlled-remotely;
iommus = <&apps_smmu 0x704 0x1>,
<&apps_smmu 0x706 0x1>,
<&apps_smmu 0x714 0x1>,
--
2.33.0
From: Michael Walle <[email protected]>
[ Upstream commit 99a7cacc66cae92db40139b57689be2af75fc6b8 ]
According to Documentation/devicetree/bindings/watchdog/arm,sp805.yaml
the compatible is:
compatible = "arm,sp805", "arm,primecell";
The current compatible string doesn't exist at all. Fix it.
Signed-off-by: Michael Walle <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 16 ++++++++--------
arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 16 ++++++++--------
2 files changed, 16 insertions(+), 16 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index f85e437f80b73..6050723172436 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -847,7 +847,7 @@
};
cluster1_core0_watchdog: wdt@c000000 {
- compatible = "arm,sp805-wdt", "arm,primecell";
+ compatible = "arm,sp805", "arm,primecell";
reg = <0x0 0xc000000 0x0 0x1000>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(16)>,
@@ -857,7 +857,7 @@
};
cluster1_core1_watchdog: wdt@c010000 {
- compatible = "arm,sp805-wdt", "arm,primecell";
+ compatible = "arm,sp805", "arm,primecell";
reg = <0x0 0xc010000 0x0 0x1000>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(16)>,
@@ -867,7 +867,7 @@
};
cluster1_core2_watchdog: wdt@c020000 {
- compatible = "arm,sp805-wdt", "arm,primecell";
+ compatible = "arm,sp805", "arm,primecell";
reg = <0x0 0xc020000 0x0 0x1000>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(16)>,
@@ -877,7 +877,7 @@
};
cluster1_core3_watchdog: wdt@c030000 {
- compatible = "arm,sp805-wdt", "arm,primecell";
+ compatible = "arm,sp805", "arm,primecell";
reg = <0x0 0xc030000 0x0 0x1000>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(16)>,
@@ -887,7 +887,7 @@
};
cluster2_core0_watchdog: wdt@c100000 {
- compatible = "arm,sp805-wdt", "arm,primecell";
+ compatible = "arm,sp805", "arm,primecell";
reg = <0x0 0xc100000 0x0 0x1000>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(16)>,
@@ -897,7 +897,7 @@
};
cluster2_core1_watchdog: wdt@c110000 {
- compatible = "arm,sp805-wdt", "arm,primecell";
+ compatible = "arm,sp805", "arm,primecell";
reg = <0x0 0xc110000 0x0 0x1000>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(16)>,
@@ -907,7 +907,7 @@
};
cluster2_core2_watchdog: wdt@c120000 {
- compatible = "arm,sp805-wdt", "arm,primecell";
+ compatible = "arm,sp805", "arm,primecell";
reg = <0x0 0xc120000 0x0 0x1000>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(16)>,
@@ -917,7 +917,7 @@
};
cluster2_core3_watchdog: wdt@c130000 {
- compatible = "arm,sp805-wdt", "arm,primecell";
+ compatible = "arm,sp805", "arm,primecell";
reg = <0x0 0xc130000 0x0 0x1000>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(16)>,
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
index 801ba9612d361..1282b61da8a55 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -387,7 +387,7 @@
};
cluster1_core0_watchdog: wdt@c000000 {
- compatible = "arm,sp805-wdt", "arm,primecell";
+ compatible = "arm,sp805", "arm,primecell";
reg = <0x0 0xc000000 0x0 0x1000>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(4)>,
@@ -397,7 +397,7 @@
};
cluster1_core1_watchdog: wdt@c010000 {
- compatible = "arm,sp805-wdt", "arm,primecell";
+ compatible = "arm,sp805", "arm,primecell";
reg = <0x0 0xc010000 0x0 0x1000>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(4)>,
@@ -407,7 +407,7 @@
};
cluster2_core0_watchdog: wdt@c100000 {
- compatible = "arm,sp805-wdt", "arm,primecell";
+ compatible = "arm,sp805", "arm,primecell";
reg = <0x0 0xc100000 0x0 0x1000>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(4)>,
@@ -417,7 +417,7 @@
};
cluster2_core1_watchdog: wdt@c110000 {
- compatible = "arm,sp805-wdt", "arm,primecell";
+ compatible = "arm,sp805", "arm,primecell";
reg = <0x0 0xc110000 0x0 0x1000>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(4)>,
@@ -427,7 +427,7 @@
};
cluster3_core0_watchdog: wdt@c200000 {
- compatible = "arm,sp805-wdt", "arm,primecell";
+ compatible = "arm,sp805", "arm,primecell";
reg = <0x0 0xc200000 0x0 0x1000>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(4)>,
@@ -437,7 +437,7 @@
};
cluster3_core1_watchdog: wdt@c210000 {
- compatible = "arm,sp805-wdt", "arm,primecell";
+ compatible = "arm,sp805", "arm,primecell";
reg = <0x0 0xc210000 0x0 0x1000>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(4)>,
@@ -447,7 +447,7 @@
};
cluster4_core0_watchdog: wdt@c300000 {
- compatible = "arm,sp805-wdt", "arm,primecell";
+ compatible = "arm,sp805", "arm,primecell";
reg = <0x0 0xc300000 0x0 0x1000>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(4)>,
@@ -457,7 +457,7 @@
};
cluster4_core1_watchdog: wdt@c310000 {
- compatible = "arm,sp805-wdt", "arm,primecell";
+ compatible = "arm,sp805", "arm,primecell";
reg = <0x0 0xc310000 0x0 0x1000>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(4)>,
--
2.33.0
From: Hans de Goede <[email protected]>
[ Upstream commit a7ac783c338bafc04d3259600646350dba989043 ]
Lockdep complains about rtw_free_assoc_resources() taking the sta_hash_lock
followed by it calling rtw_free_stainfo() which takes xmitpriv->lock.
While the rtl8723bs_xmit_thread takes the sta_hash_lock while already
holding the xmitpriv->lock:
[ 103.849756] ======================================================
[ 103.849761] WARNING: possible circular locking dependency detected
[ 103.849767] 5.15.0-rc1+ #470 Tainted: G C E
[ 103.849773] ------------------------------------------------------
[ 103.849776] wpa_supplicant/695 is trying to acquire lock:
[ 103.849781] ffffa5d0c0562b00 (&pxmitpriv->lock){+.-.}-{2:2}, at: rtw_free_stainfo+0x8a/0x510 [r8723bs]
[ 103.849840]
but task is already holding lock:
[ 103.849843] ffffa5d0c05636a8 (&pstapriv->sta_hash_lock){+.-.}-{2:2}, at: rtw_free_assoc_resources+0x48/0x110 [r8723bs]
[ 103.849881]
which lock already depends on the new lock.
[ 103.849884]
the existing dependency chain (in reverse order) is:
[ 103.849887]
-> #1 (&pstapriv->sta_hash_lock){+.-.}-{2:2}:
[ 103.849898] _raw_spin_lock_bh+0x34/0x40
[ 103.849913] rtw_get_stainfo+0x93/0x110 [r8723bs]
[ 103.849948] rtw_make_wlanhdr+0x14a/0x270 [r8723bs]
[ 103.849983] rtw_xmitframe_coalesce+0x5c/0x6c0 [r8723bs]
[ 103.850019] rtl8723bs_xmit_thread+0x4ac/0x620 [r8723bs]
[ 103.850050] kthread+0x143/0x160
[ 103.850058] ret_from_fork+0x22/0x30
[ 103.850067]
-> #0 (&pxmitpriv->lock){+.-.}-{2:2}:
[ 103.850077] __lock_acquire+0x1158/0x1de0
[ 103.850084] lock_acquire+0xb5/0x2b0
[ 103.850090] _raw_spin_lock_bh+0x34/0x40
[ 103.850095] rtw_free_stainfo+0x8a/0x510 [r8723bs]
[ 103.850130] rtw_free_assoc_resources+0x53/0x110 [r8723bs]
[ 103.850159] PHY_IQCalibrate_8723B+0x122b/0x36a0 [r8723bs]
[ 103.850189] cfg80211_disconnect+0x173/0x320 [cfg80211]
[ 103.850331] nl80211_disconnect+0x6e/0xb0 [cfg80211]
[ 103.850422] genl_family_rcv_msg_doit+0xcd/0x110
[ 103.850430] genl_rcv_msg+0xce/0x1c0
[ 103.850435] netlink_rcv_skb+0x50/0xf0
[ 103.850441] genl_rcv+0x24/0x40
[ 103.850446] netlink_unicast+0x16d/0x230
[ 103.850452] netlink_sendmsg+0x22b/0x450
[ 103.850457] sock_sendmsg+0x5e/0x60
[ 103.850465] ____sys_sendmsg+0x22f/0x270
[ 103.850472] ___sys_sendmsg+0x81/0xc0
[ 103.850479] __sys_sendmsg+0x49/0x80
[ 103.850485] do_syscall_64+0x3b/0x90
[ 103.850493] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 103.850500]
other info that might help us debug this:
[ 103.850504] Possible unsafe locking scenario:
[ 103.850507] CPU0 CPU1
[ 103.850510] ---- ----
[ 103.850512] lock(&pstapriv->sta_hash_lock);
[ 103.850518] lock(&pxmitpriv->lock);
[ 103.850524] lock(&pstapriv->sta_hash_lock);
[ 103.850530] lock(&pxmitpriv->lock);
[ 103.850535]
*** DEADLOCK ***
Push the taking of sta_hash_lock down into rtw_free_stainfo(),
where the critical section is, this allows taking the lock after
rtw_free_stainfo() has released pxmitpriv->lock.
This requires changing rtw_free_all_stainfo() so that it does its freeing
in 2 steps, first moving all stainfo-s to free to a local list while
holding the sta_hash_lock and then walking that list to call
rtw_free_stainfo() on them without holding the sta_hash_lock.
Pushing the taking of sta_hash_lock down into rtw_free_stainfo(),
also fixes a whole bunch of callers of rtw_free_stainfo() which
were not holding that lock even though they should.
Note that this also fixes the deadlock from the "remove possible
deadlock when disconnect" patch in a different way. But the
changes from that patch offer a nice locking cleanup regardless.
Signed-off-by: Hans de Goede <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/rtl8723bs/core/rtw_mlme.c | 5 -----
drivers/staging/rtl8723bs/core/rtw_mlme_ext.c | 4 ----
drivers/staging/rtl8723bs/core/rtw_sta_mgt.c | 11 +++++++++--
drivers/staging/rtl8723bs/os_dep/ioctl_linux.c | 2 --
4 files changed, 9 insertions(+), 13 deletions(-)
diff --git a/drivers/staging/rtl8723bs/core/rtw_mlme.c b/drivers/staging/rtl8723bs/core/rtw_mlme.c
index ab6a24d70cc96..1f49c49e10b45 100644
--- a/drivers/staging/rtl8723bs/core/rtw_mlme.c
+++ b/drivers/staging/rtl8723bs/core/rtw_mlme.c
@@ -897,7 +897,6 @@ void rtw_free_assoc_resources(struct adapter *adapter, int lock_scanned_queue)
{
struct mlme_priv *pmlmepriv = &adapter->mlmepriv;
struct wlan_network *tgt_network = &pmlmepriv->cur_network;
- struct sta_priv *pstapriv = &adapter->stapriv;
struct dvobj_priv *psdpriv = adapter->dvobj;
struct debug_priv *pdbgpriv = &psdpriv->drv_dbg;
@@ -905,11 +904,7 @@ void rtw_free_assoc_resources(struct adapter *adapter, int lock_scanned_queue)
struct sta_info *psta;
psta = rtw_get_stainfo(&adapter->stapriv, tgt_network->network.mac_address);
- spin_lock_bh(&(pstapriv->sta_hash_lock));
rtw_free_stainfo(adapter, psta);
-
- spin_unlock_bh(&(pstapriv->sta_hash_lock));
-
}
if (check_fwstate(pmlmepriv, WIFI_ADHOC_STATE|WIFI_ADHOC_MASTER_STATE|WIFI_AP_STATE)) {
diff --git a/drivers/staging/rtl8723bs/core/rtw_mlme_ext.c b/drivers/staging/rtl8723bs/core/rtw_mlme_ext.c
index a1ae16ec69eb6..ad9c237054c4b 100644
--- a/drivers/staging/rtl8723bs/core/rtw_mlme_ext.c
+++ b/drivers/staging/rtl8723bs/core/rtw_mlme_ext.c
@@ -1489,9 +1489,7 @@ unsigned int OnDeAuth(struct adapter *padapter, union recv_frame *precv_frame)
struct sta_info *psta;
struct sta_priv *pstapriv = &padapter->stapriv;
- /* spin_lock_bh(&(pstapriv->sta_hash_lock)); */
/* rtw_free_stainfo(padapter, psta); */
- /* spin_unlock_bh(&(pstapriv->sta_hash_lock)); */
netdev_dbg(padapter->pnetdev,
"ap recv deauth reason code(%d) sta:%pM\n", reason,
@@ -1565,9 +1563,7 @@ unsigned int OnDisassoc(struct adapter *padapter, union recv_frame *precv_frame)
struct sta_info *psta;
struct sta_priv *pstapriv = &padapter->stapriv;
- /* spin_lock_bh(&(pstapriv->sta_hash_lock)); */
/* rtw_free_stainfo(padapter, psta); */
- /* spin_unlock_bh(&(pstapriv->sta_hash_lock)); */
netdev_dbg(padapter->pnetdev,
"ap recv disassoc reason code(%d) sta:%pM\n",
diff --git a/drivers/staging/rtl8723bs/core/rtw_sta_mgt.c b/drivers/staging/rtl8723bs/core/rtw_sta_mgt.c
index c23d0c833ecf8..3d269842677dd 100644
--- a/drivers/staging/rtl8723bs/core/rtw_sta_mgt.c
+++ b/drivers/staging/rtl8723bs/core/rtw_sta_mgt.c
@@ -263,7 +263,6 @@ exit:
return psta;
}
-/* using pstapriv->sta_hash_lock to protect */
u32 rtw_free_stainfo(struct adapter *padapter, struct sta_info *psta)
{
int i;
@@ -334,8 +333,10 @@ u32 rtw_free_stainfo(struct adapter *padapter, struct sta_info *psta)
spin_unlock_bh(&pxmitpriv->lock);
+ spin_lock_bh(&pstapriv->sta_hash_lock);
list_del_init(&psta->hash_list);
pstapriv->asoc_sta_count--;
+ spin_unlock_bh(&pstapriv->sta_hash_lock);
/* re-init sta_info; 20061114 will be init in alloc_stainfo */
/* _rtw_init_sta_xmit_priv(&psta->sta_xmitpriv); */
@@ -430,6 +431,7 @@ void rtw_free_all_stainfo(struct adapter *padapter)
struct sta_info *psta = NULL;
struct sta_priv *pstapriv = &padapter->stapriv;
struct sta_info *pbcmc_stainfo = rtw_get_bcmc_stainfo(padapter);
+ LIST_HEAD(stainfo_free_list);
if (pstapriv->asoc_sta_count == 1)
return;
@@ -442,11 +444,16 @@ void rtw_free_all_stainfo(struct adapter *padapter)
psta = list_entry(plist, struct sta_info, hash_list);
if (pbcmc_stainfo != psta)
- rtw_free_stainfo(padapter, psta);
+ list_move(&psta->hash_list, &stainfo_free_list);
}
}
spin_unlock_bh(&pstapriv->sta_hash_lock);
+
+ list_for_each_safe(plist, tmp, &stainfo_free_list) {
+ psta = list_entry(plist, struct sta_info, hash_list);
+ rtw_free_stainfo(padapter, psta);
+ }
}
/* any station allocated can be searched by hash list */
diff --git a/drivers/staging/rtl8723bs/os_dep/ioctl_linux.c b/drivers/staging/rtl8723bs/os_dep/ioctl_linux.c
index 9d4a233a861e3..295121c268bd4 100644
--- a/drivers/staging/rtl8723bs/os_dep/ioctl_linux.c
+++ b/drivers/staging/rtl8723bs/os_dep/ioctl_linux.c
@@ -835,9 +835,7 @@ static int rtw_add_sta(struct net_device *dev, struct ieee_param *param)
psta = rtw_get_stainfo(pstapriv, param->sta_addr);
if (psta)
{
- spin_lock_bh(&(pstapriv->sta_hash_lock));
rtw_free_stainfo(padapter, psta);
- spin_unlock_bh(&(pstapriv->sta_hash_lock));
psta = NULL;
}
--
2.33.0
From: Kuldeep Singh <[email protected]>
[ Upstream commit 7f31ae6e01da140e34d6513815253e811019f016 ]
U-boot atempts to read serial alias value for ls1012a-rdb but couldn't
do so as it is not initialised and thus, FDT_ERR_NOTFOUND error is
reported while booting linux.
Loading fdt from FIT Image at a0000000 ...
Description: ls1012ardb-dtb
Type: Flat Device Tree
Data Start: 0xab111474
Data Size: 11285 Bytes = 11 KiB
Architecture: AArch64
Load Address: 0x90000000
Loading fdt from 0xab111474 to 0x90000000
Booting using the fdt blob at 0x90000000
Uncompressing Kernel Image
Loading Device Tree to 000000008fffa000, end 000000008ffffc14 ... OK
WARNING: fdt_fixup_stdout: could not read serial0 alias: FDT_ERR_NOTFOUND
NOTICE: RNG: INSTANTIATED
Starting kernel ...
Fix the above error by specifying serial value to duart.
Signed-off-by: Kuldeep Singh <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts
index 79f155dedb2d0..e662677a6e28f 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts
@@ -15,6 +15,7 @@
compatible = "fsl,ls1012a-rdb", "fsl,ls1012a";
aliases {
+ serial0 = &duart0;
mmc0 = &esdhc0;
mmc1 = &esdhc1;
};
--
2.33.0
From: Michael Walle <[email protected]>
[ Upstream commit 894d4f1f77d0e88f1f81af2e1e37333c1c41b631 ]
According to Documentation/devicetree/bindings/watchdog/arm,sp805.yaml
the compatible is:
compatible = "arm,sp805", "arm,primecell";
The current compatible string doesn't exist at all. Fix it.
Signed-off-by: Michael Walle <[email protected]>
Signed-off-by: Wei Xu <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/hisilicon/hi3660.dtsi | 4 ++--
arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 2 +-
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
index 2d5c1a348716a..6eabec2602e23 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
@@ -1087,7 +1087,7 @@
};
watchdog0: watchdog@e8a06000 {
- compatible = "arm,sp805-wdt", "arm,primecell";
+ compatible = "arm,sp805", "arm,primecell";
reg = <0x0 0xe8a06000 0x0 0x1000>;
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&crg_ctrl HI3660_OSC32K>,
@@ -1096,7 +1096,7 @@
};
watchdog1: watchdog@e8a07000 {
- compatible = "arm,sp805-wdt", "arm,primecell";
+ compatible = "arm,sp805", "arm,primecell";
reg = <0x0 0xe8a07000 0x0 0x1000>;
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&crg_ctrl HI3660_OSC32K>,
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
index dde9371dc5451..e4860b8a638ec 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
@@ -840,7 +840,7 @@
};
watchdog0: watchdog@f8005000 {
- compatible = "arm,sp805-wdt", "arm,primecell";
+ compatible = "arm,sp805", "arm,primecell";
reg = <0x0 0xf8005000 0x0 0x1000>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ao_ctrl HI6220_WDT0_PCLK>,
--
2.33.0
From: Bob Pearson <[email protected]>
[ Upstream commit 001345339f4ca85790a1644a74e33ae77ac116be ]
Separate software and simulated hardware lkeys and rkeys for MRs and MWs.
This makes struct ib_mr and struct ib_mw isolated from hardware changes
triggered by executing work requests.
This change fixes a bug seen in blktest.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bob Pearson <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/sw/rxe/rxe_loc.h | 1 +
drivers/infiniband/sw/rxe/rxe_mr.c | 69 ++++++++++++++++++++++-----
drivers/infiniband/sw/rxe/rxe_mw.c | 30 ++++++------
drivers/infiniband/sw/rxe/rxe_req.c | 14 ++----
drivers/infiniband/sw/rxe/rxe_verbs.h | 18 ++-----
5 files changed, 81 insertions(+), 51 deletions(-)
diff --git a/drivers/infiniband/sw/rxe/rxe_loc.h b/drivers/infiniband/sw/rxe/rxe_loc.h
index f0c954575bdec..4fd73b51fabf2 100644
--- a/drivers/infiniband/sw/rxe/rxe_loc.h
+++ b/drivers/infiniband/sw/rxe/rxe_loc.h
@@ -86,6 +86,7 @@ struct rxe_mr *lookup_mr(struct rxe_pd *pd, int access, u32 key,
int mr_check_range(struct rxe_mr *mr, u64 iova, size_t length);
int advance_dma_data(struct rxe_dma_info *dma, unsigned int length);
int rxe_invalidate_mr(struct rxe_qp *qp, u32 rkey);
+int rxe_reg_fast_mr(struct rxe_qp *qp, struct rxe_send_wqe *wqe);
int rxe_dereg_mr(struct ib_mr *ibmr, struct ib_udata *udata);
void rxe_mr_cleanup(struct rxe_pool_entry *arg);
diff --git a/drivers/infiniband/sw/rxe/rxe_mr.c b/drivers/infiniband/sw/rxe/rxe_mr.c
index 5890a82462161..bedcf15aaea75 100644
--- a/drivers/infiniband/sw/rxe/rxe_mr.c
+++ b/drivers/infiniband/sw/rxe/rxe_mr.c
@@ -48,8 +48,14 @@ static void rxe_mr_init(int access, struct rxe_mr *mr)
u32 lkey = mr->pelem.index << 8 | rxe_get_next_key(-1);
u32 rkey = (access & IB_ACCESS_REMOTE) ? lkey : 0;
- mr->ibmr.lkey = lkey;
- mr->ibmr.rkey = rkey;
+ /* set ibmr->l/rkey and also copy into private l/rkey
+ * for user MRs these will always be the same
+ * for cases where caller 'owns' the key portion
+ * they may be different until REG_MR WQE is executed.
+ */
+ mr->lkey = mr->ibmr.lkey = lkey;
+ mr->rkey = mr->ibmr.rkey = rkey;
+
mr->state = RXE_MR_STATE_INVALID;
mr->type = RXE_MR_TYPE_NONE;
mr->map_shift = ilog2(RXE_BUF_PER_MAP);
@@ -191,10 +197,8 @@ int rxe_mr_init_fast(struct rxe_pd *pd, int max_pages, struct rxe_mr *mr)
{
int err;
- rxe_mr_init(0, mr);
-
- /* In fastreg, we also set the rkey */
- mr->ibmr.rkey = mr->ibmr.lkey;
+ /* always allow remote access for FMRs */
+ rxe_mr_init(IB_ACCESS_REMOTE, mr);
err = rxe_mr_alloc(mr, max_pages);
if (err)
@@ -507,8 +511,8 @@ struct rxe_mr *lookup_mr(struct rxe_pd *pd, int access, u32 key,
if (!mr)
return NULL;
- if (unlikely((type == RXE_LOOKUP_LOCAL && mr_lkey(mr) != key) ||
- (type == RXE_LOOKUP_REMOTE && mr_rkey(mr) != key) ||
+ if (unlikely((type == RXE_LOOKUP_LOCAL && mr->lkey != key) ||
+ (type == RXE_LOOKUP_REMOTE && mr->rkey != key) ||
mr_pd(mr) != pd || (access && !(access & mr->access)) ||
mr->state != RXE_MR_STATE_VALID)) {
rxe_drop_ref(mr);
@@ -531,9 +535,9 @@ int rxe_invalidate_mr(struct rxe_qp *qp, u32 rkey)
goto err;
}
- if (rkey != mr->ibmr.rkey) {
- pr_err("%s: rkey (%#x) doesn't match mr->ibmr.rkey (%#x)\n",
- __func__, rkey, mr->ibmr.rkey);
+ if (rkey != mr->rkey) {
+ pr_err("%s: rkey (%#x) doesn't match mr->rkey (%#x)\n",
+ __func__, rkey, mr->rkey);
ret = -EINVAL;
goto err_drop_ref;
}
@@ -554,6 +558,49 @@ err:
return ret;
}
+/* user can (re)register fast MR by executing a REG_MR WQE.
+ * user is expected to hold a reference on the ib mr until the
+ * WQE completes.
+ * Once a fast MR is created this is the only way to change the
+ * private keys. It is the responsibility of the user to maintain
+ * the ib mr keys in sync with rxe mr keys.
+ */
+int rxe_reg_fast_mr(struct rxe_qp *qp, struct rxe_send_wqe *wqe)
+{
+ struct rxe_mr *mr = to_rmr(wqe->wr.wr.reg.mr);
+ u32 key = wqe->wr.wr.reg.key;
+ u32 access = wqe->wr.wr.reg.access;
+
+ /* user can only register MR in free state */
+ if (unlikely(mr->state != RXE_MR_STATE_FREE)) {
+ pr_warn("%s: mr->lkey = 0x%x not free\n",
+ __func__, mr->lkey);
+ return -EINVAL;
+ }
+
+ /* user can only register mr with qp in same protection domain */
+ if (unlikely(qp->ibqp.pd != mr->ibmr.pd)) {
+ pr_warn("%s: qp->pd and mr->pd don't match\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ /* user is only allowed to change key portion of l/rkey */
+ if (unlikely((mr->lkey & ~0xff) != (key & ~0xff))) {
+ pr_warn("%s: key = 0x%x has wrong index mr->lkey = 0x%x\n",
+ __func__, key, mr->lkey);
+ return -EINVAL;
+ }
+
+ mr->access = access;
+ mr->lkey = key;
+ mr->rkey = (access & IB_ACCESS_REMOTE) ? key : 0;
+ mr->iova = wqe->wr.wr.reg.mr->iova;
+ mr->state = RXE_MR_STATE_VALID;
+
+ return 0;
+}
+
int rxe_dereg_mr(struct ib_mr *ibmr, struct ib_udata *udata)
{
struct rxe_mr *mr = to_rmr(ibmr);
diff --git a/drivers/infiniband/sw/rxe/rxe_mw.c b/drivers/infiniband/sw/rxe/rxe_mw.c
index 5ba77df7598ed..a5e2ea7d80f02 100644
--- a/drivers/infiniband/sw/rxe/rxe_mw.c
+++ b/drivers/infiniband/sw/rxe/rxe_mw.c
@@ -21,7 +21,7 @@ int rxe_alloc_mw(struct ib_mw *ibmw, struct ib_udata *udata)
}
rxe_add_index(mw);
- ibmw->rkey = (mw->pelem.index << 8) | rxe_get_next_key(-1);
+ mw->rkey = ibmw->rkey = (mw->pelem.index << 8) | rxe_get_next_key(-1);
mw->state = (mw->ibmw.type == IB_MW_TYPE_2) ?
RXE_MW_STATE_FREE : RXE_MW_STATE_VALID;
spin_lock_init(&mw->lock);
@@ -71,6 +71,8 @@ int rxe_dealloc_mw(struct ib_mw *ibmw)
static int rxe_check_bind_mw(struct rxe_qp *qp, struct rxe_send_wqe *wqe,
struct rxe_mw *mw, struct rxe_mr *mr)
{
+ u32 key = wqe->wr.wr.mw.rkey & 0xff;
+
if (mw->ibmw.type == IB_MW_TYPE_1) {
if (unlikely(mw->state != RXE_MW_STATE_VALID)) {
pr_err_once(
@@ -108,7 +110,7 @@ static int rxe_check_bind_mw(struct rxe_qp *qp, struct rxe_send_wqe *wqe,
}
}
- if (unlikely((wqe->wr.wr.mw.rkey & 0xff) == (mw->ibmw.rkey & 0xff))) {
+ if (unlikely(key == (mw->rkey & 0xff))) {
pr_err_once("attempt to bind MW with same key\n");
return -EINVAL;
}
@@ -161,13 +163,9 @@ static int rxe_check_bind_mw(struct rxe_qp *qp, struct rxe_send_wqe *wqe,
static void rxe_do_bind_mw(struct rxe_qp *qp, struct rxe_send_wqe *wqe,
struct rxe_mw *mw, struct rxe_mr *mr)
{
- u32 rkey;
- u32 new_rkey;
-
- rkey = mw->ibmw.rkey;
- new_rkey = (rkey & 0xffffff00) | (wqe->wr.wr.mw.rkey & 0x000000ff);
+ u32 key = wqe->wr.wr.mw.rkey & 0xff;
- mw->ibmw.rkey = new_rkey;
+ mw->rkey = (mw->rkey & ~0xff) | key;
mw->access = wqe->wr.wr.mw.access;
mw->state = RXE_MW_STATE_VALID;
mw->addr = wqe->wr.wr.mw.addr;
@@ -197,29 +195,29 @@ int rxe_bind_mw(struct rxe_qp *qp, struct rxe_send_wqe *wqe)
struct rxe_mw *mw;
struct rxe_mr *mr;
struct rxe_dev *rxe = to_rdev(qp->ibqp.device);
+ u32 mw_rkey = wqe->wr.wr.mw.mw_rkey;
+ u32 mr_lkey = wqe->wr.wr.mw.mr_lkey;
unsigned long flags;
- mw = rxe_pool_get_index(&rxe->mw_pool,
- wqe->wr.wr.mw.mw_rkey >> 8);
+ mw = rxe_pool_get_index(&rxe->mw_pool, mw_rkey >> 8);
if (unlikely(!mw)) {
ret = -EINVAL;
goto err;
}
- if (unlikely(mw->ibmw.rkey != wqe->wr.wr.mw.mw_rkey)) {
+ if (unlikely(mw->rkey != mw_rkey)) {
ret = -EINVAL;
goto err_drop_mw;
}
if (likely(wqe->wr.wr.mw.length)) {
- mr = rxe_pool_get_index(&rxe->mr_pool,
- wqe->wr.wr.mw.mr_lkey >> 8);
+ mr = rxe_pool_get_index(&rxe->mr_pool, mr_lkey >> 8);
if (unlikely(!mr)) {
ret = -EINVAL;
goto err_drop_mw;
}
- if (unlikely(mr->ibmr.lkey != wqe->wr.wr.mw.mr_lkey)) {
+ if (unlikely(mr->lkey != mr_lkey)) {
ret = -EINVAL;
goto err_drop_mr;
}
@@ -292,7 +290,7 @@ int rxe_invalidate_mw(struct rxe_qp *qp, u32 rkey)
goto err;
}
- if (rkey != mw->ibmw.rkey) {
+ if (rkey != mw->rkey) {
ret = -EINVAL;
goto err_drop_ref;
}
@@ -323,7 +321,7 @@ struct rxe_mw *rxe_lookup_mw(struct rxe_qp *qp, int access, u32 rkey)
if (!mw)
return NULL;
- if (unlikely((rxe_mw_rkey(mw) != rkey) || rxe_mw_pd(mw) != pd ||
+ if (unlikely((mw->rkey != rkey) || rxe_mw_pd(mw) != pd ||
(mw->ibmw.type == IB_MW_TYPE_2 && mw->qp != qp) ||
(mw->length == 0) ||
(access && !(access & mw->access)) ||
diff --git a/drivers/infiniband/sw/rxe/rxe_req.c b/drivers/infiniband/sw/rxe/rxe_req.c
index 3894197a82f62..fc996fd31e589 100644
--- a/drivers/infiniband/sw/rxe/rxe_req.c
+++ b/drivers/infiniband/sw/rxe/rxe_req.c
@@ -572,7 +572,6 @@ static void update_state(struct rxe_qp *qp, struct rxe_send_wqe *wqe,
static int rxe_do_local_ops(struct rxe_qp *qp, struct rxe_send_wqe *wqe)
{
u8 opcode = wqe->wr.opcode;
- struct rxe_mr *mr;
u32 rkey;
int ret;
@@ -590,14 +589,11 @@ static int rxe_do_local_ops(struct rxe_qp *qp, struct rxe_send_wqe *wqe)
}
break;
case IB_WR_REG_MR:
- mr = to_rmr(wqe->wr.wr.reg.mr);
- rxe_add_ref(mr);
- mr->state = RXE_MR_STATE_VALID;
- mr->access = wqe->wr.wr.reg.access;
- mr->ibmr.lkey = wqe->wr.wr.reg.key;
- mr->ibmr.rkey = wqe->wr.wr.reg.key;
- mr->iova = wqe->wr.wr.reg.mr->iova;
- rxe_drop_ref(mr);
+ ret = rxe_reg_fast_mr(qp, wqe);
+ if (unlikely(ret)) {
+ wqe->status = IB_WC_LOC_QP_OP_ERR;
+ return ret;
+ }
break;
case IB_WR_BIND_MW:
ret = rxe_bind_mw(qp, wqe);
diff --git a/drivers/infiniband/sw/rxe/rxe_verbs.h b/drivers/infiniband/sw/rxe/rxe_verbs.h
index ac2a2148027f4..d90b1d77de347 100644
--- a/drivers/infiniband/sw/rxe/rxe_verbs.h
+++ b/drivers/infiniband/sw/rxe/rxe_verbs.h
@@ -313,6 +313,8 @@ struct rxe_mr {
struct ib_umem *umem;
+ u32 lkey;
+ u32 rkey;
enum rxe_mr_state state;
enum rxe_mr_type type;
u64 va;
@@ -350,6 +352,7 @@ struct rxe_mw {
enum rxe_mw_state state;
struct rxe_qp *qp; /* Type 2 only */
struct rxe_mr *mr;
+ u32 rkey;
int access;
u64 addr;
u64 length;
@@ -474,26 +477,11 @@ static inline struct rxe_pd *mr_pd(struct rxe_mr *mr)
return to_rpd(mr->ibmr.pd);
}
-static inline u32 mr_lkey(struct rxe_mr *mr)
-{
- return mr->ibmr.lkey;
-}
-
-static inline u32 mr_rkey(struct rxe_mr *mr)
-{
- return mr->ibmr.rkey;
-}
-
static inline struct rxe_pd *rxe_mw_pd(struct rxe_mw *mw)
{
return to_rpd(mw->ibmw.pd);
}
-static inline u32 rxe_mw_rkey(struct rxe_mw *mw)
-{
- return mw->ibmw.rkey;
-}
-
int rxe_register_device(struct rxe_dev *rxe, const char *ibdev_name);
void rxe_mc_cleanup(struct rxe_pool_entry *arg);
--
2.33.0
From: Hans de Goede <[email protected]>
[ Upstream commit 1cf2aa665901054b140eb71748661ceae99b6b5a ]
Use the new IRQF_NO_AUTOEN flag when requesting the IRQ, rather then
disabling it immediately after requesting it.
This fixes a possible race where the IRQ might trigger between requesting
and disabling it; and this also leads to a small code cleanup.
Signed-off-by: Hans de Goede <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/codecs/es8316.c | 7 ++-----
1 file changed, 2 insertions(+), 5 deletions(-)
diff --git a/sound/soc/codecs/es8316.c b/sound/soc/codecs/es8316.c
index 067757d1d70a3..5fb02635c1406 100644
--- a/sound/soc/codecs/es8316.c
+++ b/sound/soc/codecs/es8316.c
@@ -811,12 +811,9 @@ static int es8316_i2c_probe(struct i2c_client *i2c_client,
mutex_init(&es8316->lock);
ret = devm_request_threaded_irq(dev, es8316->irq, NULL, es8316_irq,
- IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
+ IRQF_TRIGGER_HIGH | IRQF_ONESHOT | IRQF_NO_AUTOEN,
"es8316", es8316);
- if (ret == 0) {
- /* Gets re-enabled by es8316_set_jack() */
- disable_irq(es8316->irq);
- } else {
+ if (ret) {
dev_warn(dev, "Failed to get IRQ %d: %d\n", es8316->irq, ret);
es8316->irq = -ENXIO;
}
--
2.33.0
From: Geraldo Nascimento <[email protected]>
[ Upstream commit 28c369e60827f706cef4604a3e2848198f25bd26 ]
Behringer UFX1204 and UFX1604 have Synchronous endpoints to which
current ALSA code applies implicit feedback sync as if they were
Asynchronous endpoints. This breaks UAC compliance and is unneeded.
The commit 5e35dc0338d85ccebacf3f77eca1e5dea73155e8 and subsequent
1a15718b41df026cffd0e42cfdc38a1384ce19f9 were meant to clear up noise.
Unfortunately, noise persisted for those using higher sample rates and
this was only solved by commit d2e8f641257d0d3af6e45d6ac2d6f9d56b8ea964
Since there are no more reports of noise, let's get rid of the
implicit-fb quirks breaking UAC compliance.
Signed-off-by: Geraldo Nascimento <[email protected]>
Link: https://lore.kernel.org/r/YVYSnoQ7nxLXT0Dq@geday
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/usb/implicit.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/sound/usb/implicit.c b/sound/usb/implicit.c
index 23767a14d1266..70319c822c10b 100644
--- a/sound/usb/implicit.c
+++ b/sound/usb/implicit.c
@@ -54,8 +54,6 @@ static const struct snd_usb_implicit_fb_match playback_implicit_fb_quirks[] = {
/* Fixed EP */
/* FIXME: check the availability of generic matching */
- IMPLICIT_FB_FIXED_DEV(0x1397, 0x0001, 0x81, 1), /* Behringer UFX1604 */
- IMPLICIT_FB_FIXED_DEV(0x1397, 0x0002, 0x81, 1), /* Behringer UFX1204 */
IMPLICIT_FB_FIXED_DEV(0x2466, 0x8010, 0x81, 2), /* Fractal Audio Axe-Fx III */
IMPLICIT_FB_FIXED_DEV(0x31e9, 0x0001, 0x81, 2), /* Solid State Logic SSL2 */
IMPLICIT_FB_FIXED_DEV(0x31e9, 0x0002, 0x81, 2), /* Solid State Logic SSL2+ */
--
2.33.0
From: Stefan Riedmueller <[email protected]>
[ Upstream commit 2f9d61869640f732599ec36b984c2b5c46067519 ]
The csi_sel mux register is located in the CCM register base and not the
CCM_ANALOG register base. So move it to the correct position in code.
Otherwise changing the parent of the csi clock can lead to a complete
system failure due to the CCM_ANALOG_PLL_SYS_TOG register being falsely
modified.
Also remove the SET_RATE_PARENT flag since one possible supply for the
csi_sel mux is the system PLL which we don't want to modify.
Signed-off-by: Stefan Riedmueller <[email protected]>
Reviewed-by: Abel Vesa <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Abel Vesa <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/imx/clk-imx6ul.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/clk/imx/clk-imx6ul.c b/drivers/clk/imx/clk-imx6ul.c
index 5dbb6a9377324..206e4c43f68f8 100644
--- a/drivers/clk/imx/clk-imx6ul.c
+++ b/drivers/clk/imx/clk-imx6ul.c
@@ -161,7 +161,6 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node)
hws[IMX6UL_PLL5_BYPASS] = imx_clk_hw_mux_flags("pll5_bypass", base + 0xa0, 16, 1, pll5_bypass_sels, ARRAY_SIZE(pll5_bypass_sels), CLK_SET_RATE_PARENT);
hws[IMX6UL_PLL6_BYPASS] = imx_clk_hw_mux_flags("pll6_bypass", base + 0xe0, 16, 1, pll6_bypass_sels, ARRAY_SIZE(pll6_bypass_sels), CLK_SET_RATE_PARENT);
hws[IMX6UL_PLL7_BYPASS] = imx_clk_hw_mux_flags("pll7_bypass", base + 0x20, 16, 1, pll7_bypass_sels, ARRAY_SIZE(pll7_bypass_sels), CLK_SET_RATE_PARENT);
- hws[IMX6UL_CLK_CSI_SEL] = imx_clk_hw_mux_flags("csi_sel", base + 0x3c, 9, 2, csi_sels, ARRAY_SIZE(csi_sels), CLK_SET_RATE_PARENT);
/* Do not bypass PLLs initially */
clk_set_parent(hws[IMX6UL_PLL1_BYPASS]->clk, hws[IMX6UL_CLK_PLL1]->clk);
@@ -270,6 +269,7 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node)
hws[IMX6UL_CLK_ECSPI_SEL] = imx_clk_hw_mux("ecspi_sel", base + 0x38, 18, 1, ecspi_sels, ARRAY_SIZE(ecspi_sels));
hws[IMX6UL_CLK_LCDIF_PRE_SEL] = imx_clk_hw_mux_flags("lcdif_pre_sel", base + 0x38, 15, 3, lcdif_pre_sels, ARRAY_SIZE(lcdif_pre_sels), CLK_SET_RATE_PARENT);
hws[IMX6UL_CLK_LCDIF_SEL] = imx_clk_hw_mux("lcdif_sel", base + 0x38, 9, 3, lcdif_sels, ARRAY_SIZE(lcdif_sels));
+ hws[IMX6UL_CLK_CSI_SEL] = imx_clk_hw_mux("csi_sel", base + 0x3c, 9, 2, csi_sels, ARRAY_SIZE(csi_sels));
hws[IMX6UL_CLK_LDB_DI0_DIV_SEL] = imx_clk_hw_mux("ldb_di0", base + 0x20, 10, 1, ldb_di0_div_sels, ARRAY_SIZE(ldb_di0_div_sels));
hws[IMX6UL_CLK_LDB_DI1_DIV_SEL] = imx_clk_hw_mux("ldb_di1", base + 0x20, 11, 1, ldb_di1_div_sels, ARRAY_SIZE(ldb_di1_div_sels));
--
2.33.0
From: Damien Le Moal <[email protected]>
[ Upstream commit 17b49bcbf8351d3dbe57204468ac34f033ed60bc ]
Several problems exist with scsi_mode_sense() buffer length handling:
1) The allocation length field of the MODE SENSE(10) command is 16-bits,
occupying bytes 7 and 8 of the CDB. With this command, access to mode
pages larger than 255 bytes is thus possible. However, the CDB
allocation length field is set by assigning len to byte 8 only, thus
truncating buffer length larger than 255.
2) If scsi_mode_sense() is called with len smaller than 8 with
sdev->use_10_for_ms set, or smaller than 4 otherwise, the buffer length
is increased to 8 and 4 respectively, and the buffer is zero filled
with these increased values, thus corrupting the memory following the
buffer.
Fix these 2 problems by using put_unaligned_be16() to set the allocation
length field of MODE SENSE(10) CDB and by returning an error when len is
too small.
Furthermore, if len is larger than 255B, always try MODE SENSE(10) first,
even if the device driver did not set sdev->use_10_for_ms. In case of
invalid opcode error for MODE SENSE(10), access to mode pages larger than
255 bytes are not retried using MODE SENSE(6). To avoid buffer length
overflows for the MODE_SENSE(10) case, check that len is smaller than 65535
bytes.
While at it, also fix the folowing:
* Use get_unaligned_be16() to retrieve the mode data length and block
descriptor length fields of the mode sense reply header instead of using
an open coded calculation.
* Fix the kdoc dbd argument explanation: the DBD bit stands for Disable
Block Descriptor, which is the opposite of what the dbd argument
description was.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Damien Le Moal <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/scsi_lib.c | 25 +++++++++++++++----------
1 file changed, 15 insertions(+), 10 deletions(-)
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 0e023547ff15a..ef4361b2d1423 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -2074,7 +2074,7 @@ EXPORT_SYMBOL_GPL(scsi_mode_select);
/**
* scsi_mode_sense - issue a mode sense, falling back from 10 to six bytes if necessary.
* @sdev: SCSI device to be queried
- * @dbd: set if mode sense will allow block descriptors to be returned
+ * @dbd: set to prevent mode sense from returning block descriptors
* @modepage: mode page being requested
* @buffer: request buffer (may not be smaller than eight bytes)
* @len: length of request buffer.
@@ -2109,18 +2109,18 @@ scsi_mode_sense(struct scsi_device *sdev, int dbd, int modepage,
sshdr = &my_sshdr;
retry:
- use_10_for_ms = sdev->use_10_for_ms;
+ use_10_for_ms = sdev->use_10_for_ms || len > 255;
if (use_10_for_ms) {
- if (len < 8)
- len = 8;
+ if (len < 8 || len > 65535)
+ return -EINVAL;
cmd[0] = MODE_SENSE_10;
- cmd[8] = len;
+ put_unaligned_be16(len, &cmd[7]);
header_length = 8;
} else {
if (len < 4)
- len = 4;
+ return -EINVAL;
cmd[0] = MODE_SENSE;
cmd[4] = len;
@@ -2144,9 +2144,15 @@ scsi_mode_sense(struct scsi_device *sdev, int dbd, int modepage,
if ((sshdr->sense_key == ILLEGAL_REQUEST) &&
(sshdr->asc == 0x20) && (sshdr->ascq == 0)) {
/*
- * Invalid command operation code
+ * Invalid command operation code: retry using
+ * MODE SENSE(6) if this was a MODE SENSE(10)
+ * request, except if the request mode page is
+ * too large for MODE SENSE single byte
+ * allocation length field.
*/
if (use_10_for_ms) {
+ if (len > 255)
+ return -EIO;
sdev->use_10_for_ms = 0;
goto retry;
}
@@ -2170,12 +2176,11 @@ scsi_mode_sense(struct scsi_device *sdev, int dbd, int modepage,
data->longlba = 0;
data->block_descriptor_length = 0;
} else if (use_10_for_ms) {
- data->length = buffer[0]*256 + buffer[1] + 2;
+ data->length = get_unaligned_be16(&buffer[0]) + 2;
data->medium_type = buffer[2];
data->device_specific = buffer[3];
data->longlba = buffer[4] & 0x01;
- data->block_descriptor_length = buffer[6]*256
- + buffer[7];
+ data->block_descriptor_length = get_unaligned_be16(&buffer[6]);
} else {
data->length = buffer[0] + 1;
data->medium_type = buffer[1];
--
2.33.0
From: Pierre-Louis Bossart <[email protected]>
[ Upstream commit a20f3b10de61add5e14b6ce4df982f4df2a4cbbc ]
The initial hdac_stream code was adapted a third time with the same
locking issues. Move the spin_lock outside the loops and make sure the
fields are protected on read/write.
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Acked-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/sof/intel/hda-dai.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/sound/soc/sof/intel/hda-dai.c b/sound/soc/sof/intel/hda-dai.c
index c1f9f0f584647..6704dbcd101cd 100644
--- a/sound/soc/sof/intel/hda-dai.c
+++ b/sound/soc/sof/intel/hda-dai.c
@@ -68,6 +68,7 @@ static struct hdac_ext_stream *
return NULL;
}
+ spin_lock_irq(&bus->reg_lock);
list_for_each_entry(stream, &bus->stream_list, list) {
struct hdac_ext_stream *hstream =
stream_to_hdac_ext_stream(stream);
@@ -107,12 +108,12 @@ static struct hdac_ext_stream *
* is updated in snd_hdac_ext_stream_decouple().
*/
if (!res->decoupled)
- snd_hdac_ext_stream_decouple(bus, res, true);
- spin_lock_irq(&bus->reg_lock);
+ snd_hdac_ext_stream_decouple_locked(bus, res, true);
+
res->link_locked = 1;
res->link_substream = substream;
- spin_unlock_irq(&bus->reg_lock);
}
+ spin_unlock_irq(&bus->reg_lock);
return res;
}
--
2.33.0
From: Hans de Goede <[email protected]>
[ Upstream commit 6e037b72cf4ea6c28a131ea021d63ee4e7e6fa64 ]
Use the new IRQF_NO_AUTOEN flag when requesting the IRQ, rather then
disabling it immediately after requesting it.
This fixes a possible race where the IRQ might trigger between requesting
and disabling it; and this also leads to a small code cleanup.
Signed-off-by: Hans de Goede <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/codecs/rt5651.c | 7 ++-----
1 file changed, 2 insertions(+), 5 deletions(-)
diff --git a/sound/soc/codecs/rt5651.c b/sound/soc/codecs/rt5651.c
index fc0c83b73f099..93820561b9f5d 100644
--- a/sound/soc/codecs/rt5651.c
+++ b/sound/soc/codecs/rt5651.c
@@ -2261,11 +2261,8 @@ static int rt5651_i2c_probe(struct i2c_client *i2c,
ret = devm_request_irq(&i2c->dev, rt5651->irq, rt5651_irq,
IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING
- | IRQF_ONESHOT, "rt5651", rt5651);
- if (ret == 0) {
- /* Gets re-enabled by rt5651_set_jack() */
- disable_irq(rt5651->irq);
- } else {
+ | IRQF_ONESHOT | IRQF_NO_AUTOEN, "rt5651", rt5651);
+ if (ret) {
dev_warn(&i2c->dev, "Failed to reguest IRQ %d: %d\n",
rt5651->irq, ret);
rt5651->irq = -ENXIO;
--
2.33.0
From: Mahesh Rajashekhara <[email protected]>
[ Upstream commit 9ee5d6e9ac52a3c8625697535f8e35864d9fd38c ]
Correct kdump hangs when controller is locked up.
There are occasions when a controller reboot (controller soft reset) is
issued when a controller firmware crash dump is in progress.
This leads to incomplete controller firmware crash dump:
- When the controller crash dump is in progress, and a kdump is initiated,
the driver issues inbound doorbell reset to bring back the controller in
SIS mode.
- If the controller is in locked up state, the inbound doorbell reset does
not work causing controller initialization failures. This results in the
driver hanging waiting for SIS mode.
To avoid an incomplete controller crash dump, add in a controller crash
dump handshake:
- Controller will indicate start and end of the controller crash dump by
setting some register bits.
- Driver will look these bits when a kdump is initiated. If a controller
crash dump is in progress, the driver will wait for the controller crash
dump to complete before issuing the controller soft reset then complete
driver initialization.
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Scott Benesh <[email protected]>
Reviewed-by: Scott Teel <[email protected]>
Reviewed-by: Mike McGowen <[email protected]>
Acked-by: John Donnelly <[email protected]>
Signed-off-by: Mahesh Rajashekhara <[email protected]>
Signed-off-by: Don Brace <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/smartpqi/smartpqi_init.c | 41 +++++++++++++++++++--
drivers/scsi/smartpqi/smartpqi_sis.c | 51 +++++++++++++++++++++++++++
drivers/scsi/smartpqi/smartpqi_sis.h | 1 +
3 files changed, 91 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/smartpqi/smartpqi_init.c b/drivers/scsi/smartpqi/smartpqi_init.c
index ecb2af3f43ca3..a5453f5e87c3e 100644
--- a/drivers/scsi/smartpqi/smartpqi_init.c
+++ b/drivers/scsi/smartpqi/smartpqi_init.c
@@ -234,15 +234,46 @@ static inline bool pqi_is_hba_lunid(u8 *scsi3addr)
return pqi_scsi3addr_equal(scsi3addr, RAID_CTLR_LUNID);
}
+#define PQI_DRIVER_SCRATCH_PQI_MODE 0x1
+#define PQI_DRIVER_SCRATCH_FW_TRIAGE_SUPPORTED 0x2
+
static inline enum pqi_ctrl_mode pqi_get_ctrl_mode(struct pqi_ctrl_info *ctrl_info)
{
- return sis_read_driver_scratch(ctrl_info);
+ return sis_read_driver_scratch(ctrl_info) & PQI_DRIVER_SCRATCH_PQI_MODE ? PQI_MODE : SIS_MODE;
}
static inline void pqi_save_ctrl_mode(struct pqi_ctrl_info *ctrl_info,
enum pqi_ctrl_mode mode)
{
- sis_write_driver_scratch(ctrl_info, mode);
+ u32 driver_scratch;
+
+ driver_scratch = sis_read_driver_scratch(ctrl_info);
+
+ if (mode == PQI_MODE)
+ driver_scratch |= PQI_DRIVER_SCRATCH_PQI_MODE;
+ else
+ driver_scratch &= ~PQI_DRIVER_SCRATCH_PQI_MODE;
+
+ sis_write_driver_scratch(ctrl_info, driver_scratch);
+}
+
+static inline bool pqi_is_fw_triage_supported(struct pqi_ctrl_info *ctrl_info)
+{
+ return (sis_read_driver_scratch(ctrl_info) & PQI_DRIVER_SCRATCH_FW_TRIAGE_SUPPORTED) != 0;
+}
+
+static inline void pqi_save_fw_triage_setting(struct pqi_ctrl_info *ctrl_info, bool is_supported)
+{
+ u32 driver_scratch;
+
+ driver_scratch = sis_read_driver_scratch(ctrl_info);
+
+ if (is_supported)
+ driver_scratch |= PQI_DRIVER_SCRATCH_FW_TRIAGE_SUPPORTED;
+ else
+ driver_scratch &= ~PQI_DRIVER_SCRATCH_FW_TRIAGE_SUPPORTED;
+
+ sis_write_driver_scratch(ctrl_info, driver_scratch);
}
static inline void pqi_ctrl_block_scan(struct pqi_ctrl_info *ctrl_info)
@@ -7301,6 +7332,7 @@ static void pqi_ctrl_update_feature_flags(struct pqi_ctrl_info *ctrl_info,
ctrl_info->unique_wwid_in_report_phys_lun_supported =
firmware_feature->enabled;
break;
+ pqi_save_fw_triage_setting(ctrl_info, firmware_feature->enabled);
}
pqi_firmware_feature_status(ctrl_info, firmware_feature);
@@ -7627,6 +7659,11 @@ static int pqi_ctrl_init(struct pqi_ctrl_info *ctrl_info)
u32 product_id;
if (reset_devices) {
+ if (pqi_is_fw_triage_supported(ctrl_info)) {
+ rc = sis_wait_for_fw_triage_completion(ctrl_info);
+ if (rc)
+ return rc;
+ }
sis_soft_reset(ctrl_info);
msleep(PQI_POST_RESET_DELAY_SECS * PQI_HZ);
} else {
diff --git a/drivers/scsi/smartpqi/smartpqi_sis.c b/drivers/scsi/smartpqi/smartpqi_sis.c
index d63c46a8e38bb..8acd3a80f5822 100644
--- a/drivers/scsi/smartpqi/smartpqi_sis.c
+++ b/drivers/scsi/smartpqi/smartpqi_sis.c
@@ -51,12 +51,20 @@
#define SIS_BASE_STRUCT_REVISION 9
#define SIS_BASE_STRUCT_ALIGNMENT 16
+#define SIS_CTRL_KERNEL_FW_TRIAGE 0x3
#define SIS_CTRL_KERNEL_UP 0x80
#define SIS_CTRL_KERNEL_PANIC 0x100
#define SIS_CTRL_READY_TIMEOUT_SECS 180
#define SIS_CTRL_READY_RESUME_TIMEOUT_SECS 90
#define SIS_CTRL_READY_POLL_INTERVAL_MSECS 10
+enum sis_fw_triage_status {
+ FW_TRIAGE_NOT_STARTED = 0,
+ FW_TRIAGE_STARTED,
+ FW_TRIAGE_COND_INVALID,
+ FW_TRIAGE_COMPLETED
+};
+
#pragma pack(1)
/* for use with SIS_CMD_INIT_BASE_STRUCT_ADDRESS command */
@@ -419,12 +427,55 @@ u32 sis_read_driver_scratch(struct pqi_ctrl_info *ctrl_info)
return readl(&ctrl_info->registers->sis_driver_scratch);
}
+static inline enum sis_fw_triage_status
+ sis_read_firmware_triage_status(struct pqi_ctrl_info *ctrl_info)
+{
+ return ((enum sis_fw_triage_status)(readl(&ctrl_info->registers->sis_firmware_status) &
+ SIS_CTRL_KERNEL_FW_TRIAGE));
+}
+
void sis_soft_reset(struct pqi_ctrl_info *ctrl_info)
{
writel(SIS_SOFT_RESET,
&ctrl_info->registers->sis_host_to_ctrl_doorbell);
}
+#define SIS_FW_TRIAGE_STATUS_TIMEOUT_SECS 300
+#define SIS_FW_TRIAGE_STATUS_POLL_INTERVAL_SECS 1
+
+int sis_wait_for_fw_triage_completion(struct pqi_ctrl_info *ctrl_info)
+{
+ int rc;
+ enum sis_fw_triage_status status;
+ unsigned long timeout;
+
+ timeout = (SIS_FW_TRIAGE_STATUS_TIMEOUT_SECS * PQI_HZ) + jiffies;
+ while (1) {
+ status = sis_read_firmware_triage_status(ctrl_info);
+ if (status == FW_TRIAGE_COND_INVALID) {
+ dev_err(&ctrl_info->pci_dev->dev,
+ "firmware triage condition invalid\n");
+ rc = -EINVAL;
+ break;
+ } else if (status == FW_TRIAGE_NOT_STARTED ||
+ status == FW_TRIAGE_COMPLETED) {
+ rc = 0;
+ break;
+ }
+
+ if (time_after(jiffies, timeout)) {
+ dev_err(&ctrl_info->pci_dev->dev,
+ "timed out waiting for firmware triage status\n");
+ rc = -ETIMEDOUT;
+ break;
+ }
+
+ ssleep(SIS_FW_TRIAGE_STATUS_POLL_INTERVAL_SECS);
+ }
+
+ return rc;
+}
+
static void __attribute__((unused)) verify_structures(void)
{
BUILD_BUG_ON(offsetof(struct sis_base_struct,
diff --git a/drivers/scsi/smartpqi/smartpqi_sis.h b/drivers/scsi/smartpqi/smartpqi_sis.h
index d29c1352a826a..c1db93054c863 100644
--- a/drivers/scsi/smartpqi/smartpqi_sis.h
+++ b/drivers/scsi/smartpqi/smartpqi_sis.h
@@ -28,5 +28,6 @@ void sis_write_driver_scratch(struct pqi_ctrl_info *ctrl_info, u32 value);
u32 sis_read_driver_scratch(struct pqi_ctrl_info *ctrl_info);
void sis_soft_reset(struct pqi_ctrl_info *ctrl_info);
u32 sis_get_product_id(struct pqi_ctrl_info *ctrl_info);
+int sis_wait_for_fw_triage_completion(struct pqi_ctrl_info *ctrl_info);
#endif /* _SMARTPQI_SIS_H */
--
2.33.0
From: Guo Zhi <[email protected]>
[ Upstream commit d4996c6eac4c81b8872043e9391563f67f13e406 ]
Pointers should be printed with %p or %px rather than cast to 'unsigned
long' and printed with %lx.
Change %lx to %p to print the hashed pointer.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Guo Zhi <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/advansys.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c
index ffb3919675734..97be0765cb9bd 100644
--- a/drivers/scsi/advansys.c
+++ b/drivers/scsi/advansys.c
@@ -3308,8 +3308,8 @@ static void asc_prt_adv_board_info(struct seq_file *m, struct Scsi_Host *shost)
shost->host_no);
seq_printf(m,
- " iop_base 0x%lx, cable_detect: %X, err_code %u\n",
- (unsigned long)v->iop_base,
+ " iop_base 0x%p, cable_detect: %X, err_code %u\n",
+ v->iop_base,
AdvReadWordRegister(iop_base,IOPW_SCSI_CFG1) & CABLE_DETECT,
v->err_code);
--
2.33.0
From: Hans de Goede <[email protected]>
[ Upstream commit 92d3360108f1839ca40451bad20ff67dd24a1964 ]
Add a quirk mechanism to allow specifying that active-high jack-detection
should be used on platforms where this info is not available in devicetree.
And add an entry for the Cyberbook T116 tablet to the DMI table, so that
jack-detection will work properly on this tablet.
Signed-off-by: Hans de Goede <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/codecs/nau8824.c | 40 ++++++++++++++++++++++++++++++++++++++
1 file changed, 40 insertions(+)
diff --git a/sound/soc/codecs/nau8824.c b/sound/soc/codecs/nau8824.c
index f946ef65a4c19..f7018f2dd21fd 100644
--- a/sound/soc/codecs/nau8824.c
+++ b/sound/soc/codecs/nau8824.c
@@ -8,6 +8,7 @@
#include <linux/module.h>
#include <linux/delay.h>
+#include <linux/dmi.h>
#include <linux/init.h>
#include <linux/i2c.h>
#include <linux/regmap.h>
@@ -27,6 +28,12 @@
#include "nau8824.h"
+#define NAU8824_JD_ACTIVE_HIGH BIT(0)
+
+static int nau8824_quirk;
+static int quirk_override = -1;
+module_param_named(quirk, quirk_override, uint, 0444);
+MODULE_PARM_DESC(quirk, "Board-specific quirk override");
static int nau8824_config_sysclk(struct nau8824 *nau8824,
int clk_id, unsigned int freq);
@@ -1845,6 +1852,34 @@ static int nau8824_read_device_properties(struct device *dev,
return 0;
}
+/* Please keep this list alphabetically sorted */
+static const struct dmi_system_id nau8824_quirk_table[] = {
+ {
+ /* Cyberbook T116 rugged tablet */
+ .matches = {
+ DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "Default string"),
+ DMI_EXACT_MATCH(DMI_BOARD_NAME, "Cherry Trail CR"),
+ DMI_EXACT_MATCH(DMI_PRODUCT_SKU, "20170531"),
+ },
+ .driver_data = (void *)(NAU8824_JD_ACTIVE_HIGH),
+ },
+ {}
+};
+
+static void nau8824_check_quirks(void)
+{
+ const struct dmi_system_id *dmi_id;
+
+ if (quirk_override != -1) {
+ nau8824_quirk = quirk_override;
+ return;
+ }
+
+ dmi_id = dmi_first_match(nau8824_quirk_table);
+ if (dmi_id)
+ nau8824_quirk = (unsigned long)dmi_id->driver_data;
+}
+
static int nau8824_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
@@ -1869,6 +1904,11 @@ static int nau8824_i2c_probe(struct i2c_client *i2c,
nau8824->irq = i2c->irq;
sema_init(&nau8824->jd_sem, 1);
+ nau8824_check_quirks();
+
+ if (nau8824_quirk & NAU8824_JD_ACTIVE_HIGH)
+ nau8824->jkdet_polarity = 0;
+
nau8824_print_device_properties(nau8824);
ret = regmap_read(nau8824->regmap, NAU8824_REG_I2C_DEVICE_ID, &value);
--
2.33.0
From: Selvin Xavier <[email protected]>
[ Upstream commit 6bda39149d4b8920fdb8744090653aca3daa792d ]
When VF is configured with default vlan, HW strips the vlan from the
packet and driver receives it in Rx completion. VLAN needs to be reported
for UD work completion only if the vlan is configured on the host. Add a
check for valid vlan in the UD receive path.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Selvin Xavier <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/hw/bnxt_re/ib_verbs.c | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)
diff --git a/drivers/infiniband/hw/bnxt_re/ib_verbs.c b/drivers/infiniband/hw/bnxt_re/ib_verbs.c
index 408dfbcc47b5e..b7ec3a3926785 100644
--- a/drivers/infiniband/hw/bnxt_re/ib_verbs.c
+++ b/drivers/infiniband/hw/bnxt_re/ib_verbs.c
@@ -3354,8 +3354,11 @@ static void bnxt_re_process_res_ud_wc(struct bnxt_re_qp *qp,
struct ib_wc *wc,
struct bnxt_qplib_cqe *cqe)
{
+ struct bnxt_re_dev *rdev;
+ u16 vlan_id = 0;
u8 nw_type;
+ rdev = qp->rdev;
wc->opcode = IB_WC_RECV;
wc->status = __rc_to_ib_wc_status(cqe->status);
@@ -3367,9 +3370,12 @@ static void bnxt_re_process_res_ud_wc(struct bnxt_re_qp *qp,
memcpy(wc->smac, cqe->smac, ETH_ALEN);
wc->wc_flags |= IB_WC_WITH_SMAC;
if (cqe->flags & CQ_RES_UD_FLAGS_META_FORMAT_VLAN) {
- wc->vlan_id = (cqe->cfa_meta & 0xFFF);
- if (wc->vlan_id < 0x1000)
- wc->wc_flags |= IB_WC_WITH_VLAN;
+ vlan_id = (cqe->cfa_meta & 0xFFF);
+ }
+ /* Mark only if vlan_id is non zero */
+ if (vlan_id && bnxt_re_check_if_vlan_valid(rdev, vlan_id)) {
+ wc->vlan_id = vlan_id;
+ wc->wc_flags |= IB_WC_WITH_VLAN;
}
nw_type = (cqe->flags & CQ_RES_UD_FLAGS_ROCE_IP_VER_MASK) >>
CQ_RES_UD_FLAGS_ROCE_IP_VER_SFT;
--
2.33.0
From: Frieder Schrempf <[email protected]>
[ Upstream commit 315e7b884190a6c9c28e95ad3b724dde9e922b99 ]
According to the datasheet the VSC8531 PHY expects a reset pulse of 100 ns
and a delay of 15 ms after the reset has been deasserted. Set the matching
values in the devicetree.
Reported-by: Heiko Thiery <[email protected]>
Signed-off-by: Frieder Schrempf <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts
index e99e7644ff392..49d7470812eef 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts
@@ -123,8 +123,8 @@
ethphy: ethernet-phy@0 {
reg = <0>;
- reset-assert-us = <100>;
- reset-deassert-us = <100>;
+ reset-assert-us = <1>;
+ reset-deassert-us = <15000>;
reset-gpios = <&gpio4 27 GPIO_ACTIVE_LOW>;
};
};
--
2.33.0
From: Pierre-Louis Bossart <[email protected]>
[ Upstream commit 9d36ceab94151f07cf3fcb067213ac87937adf12 ]
These devices are based on an I2C/I2S device, we need to force the use
of the SOF driver otherwise the legacy HDaudio driver will be loaded -
only HDMI will be supported.
Co-developed-by: Huajun Li <[email protected]>
Signed-off-by: Huajun Li <[email protected]>
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Kai Vehmanen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/hda/intel-dsp-config.c | 22 ++++++++++++++++++++--
1 file changed, 20 insertions(+), 2 deletions(-)
diff --git a/sound/hda/intel-dsp-config.c b/sound/hda/intel-dsp-config.c
index c9d0ba353463b..b9ac9e9e45a48 100644
--- a/sound/hda/intel-dsp-config.c
+++ b/sound/hda/intel-dsp-config.c
@@ -31,6 +31,7 @@ struct config_entry {
u16 device;
u8 acpi_hid[ACPI_ID_LEN];
const struct dmi_system_id *dmi_table;
+ u8 codec_hid[ACPI_ID_LEN];
};
/*
@@ -56,7 +57,7 @@ static const struct config_entry config_table[] = {
/*
* Apollolake (Broxton-P)
* the legacy HDAudio driver is used except on Up Squared (SOF) and
- * Chromebooks (SST)
+ * Chromebooks (SST), as well as devices based on the ES8336 codec
*/
#if IS_ENABLED(CONFIG_SND_SOC_SOF_APOLLOLAKE)
{
@@ -73,6 +74,11 @@ static const struct config_entry config_table[] = {
{}
}
},
+ {
+ .flags = FLAG_SOF,
+ .device = 0x5a98,
+ .codec_hid = "ESSX8336",
+ },
#endif
#if IS_ENABLED(CONFIG_SND_SOC_INTEL_APL)
{
@@ -137,7 +143,7 @@ static const struct config_entry config_table[] = {
/*
* Geminilake uses legacy HDAudio driver except for Google
- * Chromebooks
+ * Chromebooks and devices based on the ES8336 codec
*/
/* Geminilake */
#if IS_ENABLED(CONFIG_SND_SOC_SOF_GEMINILAKE)
@@ -154,6 +160,11 @@ static const struct config_entry config_table[] = {
{}
}
},
+ {
+ .flags = FLAG_SOF,
+ .device = 0x3198,
+ .codec_hid = "ESSX8336",
+ },
#endif
/*
@@ -311,6 +322,11 @@ static const struct config_entry config_table[] = {
.flags = FLAG_SOF | FLAG_SOF_ONLY_IF_DMIC_OR_SOUNDWIRE,
.device = 0x43c8,
},
+ {
+ .flags = FLAG_SOF,
+ .device = 0xa0c8,
+ .codec_hid = "ESSX8336",
+ },
#endif
/* Elkhart Lake */
@@ -354,6 +370,8 @@ static const struct config_entry *snd_intel_dsp_find_config
continue;
if (table->dmi_table && !dmi_check_system(table->dmi_table))
continue;
+ if (table->codec_hid[0] && !acpi_dev_present(table->codec_hid, NULL, -1))
+ continue;
return table;
}
return NULL;
--
2.33.0
From: Pierre-Louis Bossart <[email protected]>
[ Upstream commit f2470679b070a77ea22f8b791fae7084c2340c7d ]
We don't have a configuration for a single amp on link1.
BugLink: https://github.com/thesofproject/linux/issues/3161
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Rander Wang <[email protected]>
Reviewed-by: Bard Liao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../intel/common/soc-acpi-intel-tgl-match.c | 41 +++++++++++++++++++
1 file changed, 41 insertions(+)
diff --git a/sound/soc/intel/common/soc-acpi-intel-tgl-match.c b/sound/soc/intel/common/soc-acpi-intel-tgl-match.c
index 785d5f5f8a9c9..11801b905ecc2 100644
--- a/sound/soc/intel/common/soc-acpi-intel-tgl-match.c
+++ b/sound/soc/intel/common/soc-acpi-intel-tgl-match.c
@@ -156,6 +156,15 @@ static const struct snd_soc_acpi_adr_device rt711_sdca_0_adr[] = {
}
};
+static const struct snd_soc_acpi_adr_device rt1316_1_single_adr[] = {
+ {
+ .adr = 0x000131025D131601ull,
+ .num_endpoints = 1,
+ .endpoints = &single_endpoint,
+ .name_prefix = "rt1316-1"
+ }
+};
+
static const struct snd_soc_acpi_adr_device rt1316_1_group1_adr[] = {
{
.adr = 0x000131025D131601ull, /* unique ID is set for some reason */
@@ -320,6 +329,25 @@ static const struct snd_soc_acpi_link_adr tgl_3_in_1_sdca[] = {
{}
};
+static const struct snd_soc_acpi_link_adr tgl_3_in_1_sdca_mono[] = {
+ {
+ .mask = BIT(0),
+ .num_adr = ARRAY_SIZE(rt711_sdca_0_adr),
+ .adr_d = rt711_sdca_0_adr,
+ },
+ {
+ .mask = BIT(1),
+ .num_adr = ARRAY_SIZE(rt1316_1_single_adr),
+ .adr_d = rt1316_1_single_adr,
+ },
+ {
+ .mask = BIT(3),
+ .num_adr = ARRAY_SIZE(rt714_3_adr),
+ .adr_d = rt714_3_adr,
+ },
+ {}
+};
+
static const struct snd_soc_acpi_codecs tgl_max98373_amp = {
.num_codecs = 1,
.codecs = {"MX98373"}
@@ -412,6 +440,19 @@ struct snd_soc_acpi_mach snd_soc_acpi_intel_tgl_sdw_machines[] = {
.drv_name = "sof_sdw",
.sof_tplg_filename = "sof-tgl-rt711-rt1316-rt714.tplg",
},
+ {
+ /*
+ * link_mask should be 0xB, but all links are enabled by BIOS.
+ * This entry will be selected if there is no rt1316 amplifier exposed
+ * on link2 since it will fail to match the above entry.
+ */
+
+ .link_mask = 0xF, /* 4 active links required */
+ .links = tgl_3_in_1_sdca_mono,
+ .drv_name = "sof_sdw",
+ .sof_tplg_filename = "sof-tgl-rt711-l0-rt1316-l1-mono-rt714-l3.tplg",
+ },
+
{
.link_mask = 0x3, /* rt711 on link 0 and 1 rt1308 on link 1 */
.links = tgl_hp,
--
2.33.0
From: Tony Lindgren <[email protected]>
[ Upstream commit 9d881361206ebcf6285c2ec2ef275aff80875347 ]
Some interconnect target modules such as otg and gpmc on am335x need a
re-init after resume. As we also have PM runtime cases where the context
may be lost, let's handle these all with cpu_pm.
For the am335x resume path, we already have cpu_pm_resume() call
cpu_pm_cluster_exit().
Signed-off-by: Tony Lindgren <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/bus/ti-sysc.c | 108 ++++++++++++++++++++++++--
include/linux/platform_data/ti-sysc.h | 1 +
2 files changed, 103 insertions(+), 6 deletions(-)
diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c
index f47c7e20cc271..7c645754a82b1 100644
--- a/drivers/bus/ti-sysc.c
+++ b/drivers/bus/ti-sysc.c
@@ -6,6 +6,7 @@
#include <linux/io.h>
#include <linux/clk.h>
#include <linux/clkdev.h>
+#include <linux/cpu_pm.h>
#include <linux/delay.h>
#include <linux/list.h>
#include <linux/module.h>
@@ -52,11 +53,18 @@ struct sysc_address {
struct list_head node;
};
+struct sysc_module {
+ struct sysc *ddata;
+ struct list_head node;
+};
+
struct sysc_soc_info {
unsigned long general_purpose:1;
enum sysc_soc soc;
- struct mutex list_lock; /* disabled modules list lock */
+ struct mutex list_lock; /* disabled and restored modules list lock */
struct list_head disabled_modules;
+ struct list_head restored_modules;
+ struct notifier_block nb;
};
enum sysc_clocks {
@@ -2442,6 +2450,79 @@ static struct dev_pm_domain sysc_child_pm_domain = {
}
};
+/* Caller needs to take list_lock if ever used outside of cpu_pm */
+static void sysc_reinit_modules(struct sysc_soc_info *soc)
+{
+ struct sysc_module *module;
+ struct list_head *pos;
+ struct sysc *ddata;
+ int error = 0;
+
+ list_for_each(pos, &sysc_soc->restored_modules) {
+ module = list_entry(pos, struct sysc_module, node);
+ ddata = module->ddata;
+ error = sysc_reinit_module(ddata, ddata->enabled);
+ }
+}
+
+/**
+ * sysc_context_notifier - optionally reset and restore module after idle
+ * @nb: notifier block
+ * @cmd: unused
+ * @v: unused
+ *
+ * Some interconnect target modules need to be restored, or reset and restored
+ * on CPU_PM CPU_PM_CLUSTER_EXIT notifier. This is needed at least for am335x
+ * OTG and GPMC target modules even if the modules are unused.
+ */
+static int sysc_context_notifier(struct notifier_block *nb, unsigned long cmd,
+ void *v)
+{
+ struct sysc_soc_info *soc;
+
+ soc = container_of(nb, struct sysc_soc_info, nb);
+
+ switch (cmd) {
+ case CPU_CLUSTER_PM_ENTER:
+ break;
+ case CPU_CLUSTER_PM_ENTER_FAILED: /* No need to restore context */
+ break;
+ case CPU_CLUSTER_PM_EXIT:
+ sysc_reinit_modules(soc);
+ break;
+ }
+
+ return NOTIFY_OK;
+}
+
+/**
+ * sysc_add_restored - optionally add reset and restore quirk hanlling
+ * @ddata: device data
+ */
+static void sysc_add_restored(struct sysc *ddata)
+{
+ struct sysc_module *restored_module;
+
+ restored_module = kzalloc(sizeof(*restored_module), GFP_KERNEL);
+ if (!restored_module)
+ return;
+
+ restored_module->ddata = ddata;
+
+ mutex_lock(&sysc_soc->list_lock);
+
+ list_add(&restored_module->node, &sysc_soc->restored_modules);
+
+ if (sysc_soc->nb.notifier_call)
+ goto out_unlock;
+
+ sysc_soc->nb.notifier_call = sysc_context_notifier;
+ cpu_pm_register_notifier(&sysc_soc->nb);
+
+out_unlock:
+ mutex_unlock(&sysc_soc->list_lock);
+}
+
/**
* sysc_legacy_idle_quirk - handle children in omap_device compatible way
* @ddata: device driver data
@@ -2941,12 +3022,14 @@ static int sysc_add_disabled(unsigned long base)
}
/*
- * One time init to detect the booted SoC and disable unavailable features.
+ * One time init to detect the booted SoC, disable unavailable features
+ * and initialize list for optional cpu_pm notifier.
+ *
* Note that we initialize static data shared across all ti-sysc instances
* so ddata is only used for SoC type. This can be called from module_init
* once we no longer need to rely on platform data.
*/
-static int sysc_init_soc(struct sysc *ddata)
+static int sysc_init_static_data(struct sysc *ddata)
{
const struct soc_device_attribute *match;
struct ti_sysc_platform_data *pdata;
@@ -2962,6 +3045,7 @@ static int sysc_init_soc(struct sysc *ddata)
mutex_init(&sysc_soc->list_lock);
INIT_LIST_HEAD(&sysc_soc->disabled_modules);
+ INIT_LIST_HEAD(&sysc_soc->restored_modules);
sysc_soc->general_purpose = true;
pdata = dev_get_platdata(ddata->dev);
@@ -3026,15 +3110,24 @@ static int sysc_init_soc(struct sysc *ddata)
return 0;
}
-static void sysc_cleanup_soc(void)
+static void sysc_cleanup_static_data(void)
{
+ struct sysc_module *restored_module;
struct sysc_address *disabled_module;
struct list_head *pos, *tmp;
if (!sysc_soc)
return;
+ if (sysc_soc->nb.notifier_call)
+ cpu_pm_unregister_notifier(&sysc_soc->nb);
+
mutex_lock(&sysc_soc->list_lock);
+ list_for_each_safe(pos, tmp, &sysc_soc->restored_modules) {
+ restored_module = list_entry(pos, struct sysc_module, node);
+ list_del(pos);
+ kfree(restored_module);
+ }
list_for_each_safe(pos, tmp, &sysc_soc->disabled_modules) {
disabled_module = list_entry(pos, struct sysc_address, node);
list_del(pos);
@@ -3102,7 +3195,7 @@ static int sysc_probe(struct platform_device *pdev)
ddata->dev = &pdev->dev;
platform_set_drvdata(pdev, ddata);
- error = sysc_init_soc(ddata);
+ error = sysc_init_static_data(ddata);
if (error)
return error;
@@ -3200,6 +3293,9 @@ static int sysc_probe(struct platform_device *pdev)
pm_runtime_put(&pdev->dev);
}
+ if (ddata->cfg.quirks & SYSC_QUIRK_REINIT_ON_CTX_LOST)
+ sysc_add_restored(ddata);
+
return 0;
err:
@@ -3281,7 +3377,7 @@ static void __exit sysc_exit(void)
{
bus_unregister_notifier(&platform_bus_type, &sysc_nb);
platform_driver_unregister(&sysc_driver);
- sysc_cleanup_soc();
+ sysc_cleanup_static_data();
}
module_exit(sysc_exit);
diff --git a/include/linux/platform_data/ti-sysc.h b/include/linux/platform_data/ti-sysc.h
index 9837fb011f2fb..989aa30c598dc 100644
--- a/include/linux/platform_data/ti-sysc.h
+++ b/include/linux/platform_data/ti-sysc.h
@@ -50,6 +50,7 @@ struct sysc_regbits {
s8 emufree_shift;
};
+#define SYSC_QUIRK_REINIT_ON_CTX_LOST BIT(28)
#define SYSC_QUIRK_REINIT_ON_RESUME BIT(27)
#define SYSC_QUIRK_GPMC_DEBUG BIT(26)
#define SYSC_MODULE_QUIRK_ENA_RESETDONE BIT(25)
--
2.33.0
From: Tony Lindgren <[email protected]>
[ Upstream commit 9067839ff45a528bcb015cc2f24f656126b91e3f ]
Let's use SYSC_QUIRK_REINIT_ON_CTX_LOST quirk for am335x otg instead of
SYSC_QUIRK_REINIT_ON_RESUME quirk as we can now handle the context loss
in a more generic way.
Signed-off-by: Tony Lindgren <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/bus/ti-sysc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c
index 7c645754a82b1..bb377bb13564a 100644
--- a/drivers/bus/ti-sysc.c
+++ b/drivers/bus/ti-sysc.c
@@ -1567,7 +1567,7 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = {
0xffffffff, SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_SWSUP_MSTANDBY),
SYSC_QUIRK("usb_otg_hs", 0, 0, 0x10, -ENODEV, 0x4ea2080d, 0xffffffff,
SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_SWSUP_MSTANDBY |
- SYSC_QUIRK_REINIT_ON_RESUME),
+ SYSC_QUIRK_REINIT_ON_CTX_LOST),
SYSC_QUIRK("wdt", 0, 0, 0x10, 0x14, 0x502a0500, 0xfffff0f0,
SYSC_MODULE_QUIRK_WDT),
/* PRUSS on am3, am4 and am5 */
--
2.33.0
From: Luis Chamberlain <[email protected]>
[ Upstream commit f7a07f7b96033df7709042ff38e998720a3f7119 ]
The firmware_loader can be used with a pre-allocated buffer
through the use of the API calls:
o request_firmware_into_buf()
o request_partial_firmware_into_buf()
If the firmware was built-in and present, our current check
for if the built-in firmware fits into the pre-allocated buffer
does not return any errors, and we proceed to tell the caller
that everything worked fine. It's a lie and no firmware would
end up being copied into the pre-allocated buffer. So if the
caller trust the result it may end up writing a bunch of 0's
to a device!
Fix this by making the function that checks for the pre-allocated
buffer return non-void. Since the typical use case is when no
pre-allocated buffer is provided make this return successfully
for that case. If the built-in firmware does *not* fit into the
pre-allocated buffer size return a failure as we should have
been doing before.
I'm not aware of users of the built-in firmware using the API
calls with a pre-allocated buffer, as such I doubt this fixes
any real life issue. But you never know... perhaps some oddball
private tree might use it.
In so far as upstream is concerned this just fixes our code for
correctness.
Signed-off-by: Luis Chamberlain <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/base/firmware_loader/main.c | 13 +++++++------
1 file changed, 7 insertions(+), 6 deletions(-)
diff --git a/drivers/base/firmware_loader/main.c b/drivers/base/firmware_loader/main.c
index bdbedc6660a87..ef904b8b112e6 100644
--- a/drivers/base/firmware_loader/main.c
+++ b/drivers/base/firmware_loader/main.c
@@ -100,12 +100,15 @@ static struct firmware_cache fw_cache;
extern struct builtin_fw __start_builtin_fw[];
extern struct builtin_fw __end_builtin_fw[];
-static void fw_copy_to_prealloc_buf(struct firmware *fw,
+static bool fw_copy_to_prealloc_buf(struct firmware *fw,
void *buf, size_t size)
{
- if (!buf || size < fw->size)
- return;
+ if (!buf)
+ return true;
+ if (size < fw->size)
+ return false;
memcpy(buf, fw->data, fw->size);
+ return true;
}
static bool fw_get_builtin_firmware(struct firmware *fw, const char *name,
@@ -117,9 +120,7 @@ static bool fw_get_builtin_firmware(struct firmware *fw, const char *name,
if (strcmp(name, b_fw->name) == 0) {
fw->size = b_fw->size;
fw->data = b_fw->data;
- fw_copy_to_prealloc_buf(fw, buf, size);
-
- return true;
+ return fw_copy_to_prealloc_buf(fw, buf, size);
}
}
--
2.33.0
From: Pierre-Louis Bossart <[email protected]>
[ Upstream commit 64ba6d2ce72ffde70dc5a1794917bf1573203716 ]
This device is based on SDCA codecs but with a single amplifier
instead of two.
BugLink: https://github.com/thesofproject/linux/issues/3161
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Rander Wang <[email protected]>
Reviewed-by: Bard Liao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/intel/boards/sof_sdw.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/sound/soc/intel/boards/sof_sdw.c b/sound/soc/intel/boards/sof_sdw.c
index 6b06248a9327a..f10496206ceed 100644
--- a/sound/soc/intel/boards/sof_sdw.c
+++ b/sound/soc/intel/boards/sof_sdw.c
@@ -213,6 +213,16 @@ static const struct dmi_system_id sof_sdw_quirk_table[] = {
SOF_RT715_DAI_ID_FIX |
SOF_SDW_FOUR_SPK),
},
+ {
+ .callback = sof_sdw_quirk_cb,
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc"),
+ DMI_EXACT_MATCH(DMI_PRODUCT_SKU, "0A45")
+ },
+ .driver_data = (void *)(SOF_SDW_TGL_HDMI |
+ RT711_JD2 |
+ SOF_RT715_DAI_ID_FIX),
+ },
/* AlderLake devices */
{
.callback = sof_sdw_quirk_cb,
--
2.33.0
From: Yang Yingliang <[email protected]>
[ Upstream commit 14651496a3de6807a17c310f63c894ea0c5d858e ]
It will cause null-ptr-deref if platform_get_resource() returns NULL,
we need check the return value.
Signed-off-by: Yang Yingliang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/musb/tusb6010.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c
index c968ecda42aa8..7ed4cc348d993 100644
--- a/drivers/usb/musb/tusb6010.c
+++ b/drivers/usb/musb/tusb6010.c
@@ -1104,6 +1104,11 @@ static int tusb_musb_init(struct musb *musb)
/* dma address for async dma */
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!mem) {
+ pr_debug("no async dma resource?\n");
+ ret = -ENODEV;
+ goto done;
+ }
musb->async = mem->start;
/* dma address for sync dma */
--
2.33.0
From: Guanghui Feng <[email protected]>
[ Upstream commit 3968ddcf05fb4b9409cd1859feb06a5b0550a1c1 ]
When running ltp testcase(ltp/testcases/kernel/pty/pty04.c) with arm64, there is a soft lockup,
which look like this one:
Workqueue: events_unbound flush_to_ldisc
Call trace:
dump_backtrace+0x0/0x1ec
show_stack+0x24/0x30
dump_stack+0xd0/0x128
panic+0x15c/0x374
watchdog_timer_fn+0x2b8/0x304
__run_hrtimer+0x88/0x2c0
__hrtimer_run_queues+0xa4/0x120
hrtimer_interrupt+0xfc/0x270
arch_timer_handler_phys+0x40/0x50
handle_percpu_devid_irq+0x94/0x220
__handle_domain_irq+0x88/0xf0
gic_handle_irq+0x84/0xfc
el1_irq+0xc8/0x180
slip_unesc+0x80/0x214 [slip]
tty_ldisc_receive_buf+0x64/0x80
tty_port_default_receive_buf+0x50/0x90
flush_to_ldisc+0xbc/0x110
process_one_work+0x1d4/0x4b0
worker_thread+0x180/0x430
kthread+0x11c/0x120
In the testcase pty04, The first process call the write syscall to send
data to the pty master. At the same time, the workqueue will do the
flush_to_ldisc to pop data in a loop until there is no more data left.
When the sender and workqueue running in different core, the sender sends
data fastly in full time which will result in workqueue doing work in loop
for a long time and occuring softlockup in flush_to_ldisc with kernel
configured without preempt. So I add need_resched check and cond_resched
in the flush_to_ldisc loop to avoid it.
Signed-off-by: Guanghui Feng <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/tty/tty_buffer.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index 635d0af229b72..6c7e65b1d9a1c 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -544,6 +544,9 @@ static void flush_to_ldisc(struct work_struct *work)
if (!count)
break;
head->read += count;
+
+ if (need_resched())
+ cond_resched();
}
mutex_unlock(&buf->lock);
--
2.33.0
From: Bixuan Cui <[email protected]>
[ Upstream commit b2fc2c92d2fd34d93268f677e514936f50dd6b5c ]
The platform_node is returned by of_parse_phandle() should have
of_node_put() before return.
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Bixuan Cui <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/mediatek/mt8195/mt8195-mt6359-rt1019-rt5682.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/sound/soc/mediatek/mt8195/mt8195-mt6359-rt1019-rt5682.c b/sound/soc/mediatek/mt8195/mt8195-mt6359-rt1019-rt5682.c
index de09f67c04502..a3fa8efc8f81c 100644
--- a/sound/soc/mediatek/mt8195/mt8195-mt6359-rt1019-rt5682.c
+++ b/sound/soc/mediatek/mt8195/mt8195-mt6359-rt1019-rt5682.c
@@ -1040,8 +1040,10 @@ static int mt8195_mt6359_rt1019_rt5682_dev_probe(struct platform_device *pdev)
}
priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
- if (!priv)
+ if (!priv) {
+ of_node_put(platform_node);
return -ENOMEM;
+ }
snd_soc_card_set_drvdata(card, priv);
@@ -1049,6 +1051,8 @@ static int mt8195_mt6359_rt1019_rt5682_dev_probe(struct platform_device *pdev)
if (ret)
dev_err(&pdev->dev, "%s snd_soc_register_card fail %d\n",
__func__, ret);
+
+ of_node_put(platform_node);
return ret;
}
--
2.33.0
From: Fabio Aiuto <[email protected]>
[ Upstream commit 54659ca026e586bbb33a7e60daa6443a3ac6b5df ]
when turning off a connection, lockdep complains with the
following warning (a modprobe has been done but the same
happens with a disconnection from NetworkManager,
it's enough to trigger a cfg80211_disconnect call):
[ 682.855867] ======================================================
[ 682.855877] WARNING: possible circular locking dependency detected
[ 682.855887] 5.14.0-rc6+ #16 Tainted: G C OE
[ 682.855898] ------------------------------------------------------
[ 682.855906] modprobe/1770 is trying to acquire lock:
[ 682.855916] ffffb6d000332b00 (&pxmitpriv->lock){+.-.}-{2:2},
at: rtw_free_stainfo+0x52/0x4a0 [r8723bs]
[ 682.856073]
but task is already holding lock:
[ 682.856081] ffffb6d0003336a8 (&pstapriv->sta_hash_lock){+.-.}-{2:2},
at: rtw_free_assoc_resources+0x48/0x110 [r8723bs]
[ 682.856207]
which lock already depends on the new lock.
[ 682.856215]
the existing dependency chain (in reverse order) is:
[ 682.856223]
-> #1 (&pstapriv->sta_hash_lock){+.-.}-{2:2}:
[ 682.856247] _raw_spin_lock_bh+0x34/0x40
[ 682.856265] rtw_get_stainfo+0x9a/0x110 [r8723bs]
[ 682.856389] rtw_xmit_classifier+0x27/0x130 [r8723bs]
[ 682.856515] rtw_xmitframe_enqueue+0xa/0x20 [r8723bs]
[ 682.856642] rtl8723bs_hal_xmit+0x3b/0xb0 [r8723bs]
[ 682.856752] rtw_xmit+0x4ef/0x890 [r8723bs]
[ 682.856879] _rtw_xmit_entry+0xba/0x350 [r8723bs]
[ 682.856981] dev_hard_start_xmit+0xee/0x320
[ 682.856999] sch_direct_xmit+0x8c/0x330
[ 682.857014] __dev_queue_xmit+0xba5/0xf00
[ 682.857030] packet_sendmsg+0x981/0x1b80
[ 682.857047] sock_sendmsg+0x5b/0x60
[ 682.857060] __sys_sendto+0xf1/0x160
[ 682.857073] __x64_sys_sendto+0x24/0x30
[ 682.857087] do_syscall_64+0x3a/0x80
[ 682.857102] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 682.857117]
-> #0 (&pxmitpriv->lock){+.-.}-{2:2}:
[ 682.857142] __lock_acquire+0xfd9/0x1b50
[ 682.857158] lock_acquire+0xb4/0x2c0
[ 682.857172] _raw_spin_lock_bh+0x34/0x40
[ 682.857185] rtw_free_stainfo+0x52/0x4a0 [r8723bs]
[ 682.857308] rtw_free_assoc_resources+0x53/0x110 [r8723bs]
[ 682.857415] cfg80211_rtw_disconnect+0x4b/0x70 [r8723bs]
[ 682.857522] cfg80211_disconnect+0x12e/0x2f0 [cfg80211]
[ 682.857759] cfg80211_leave+0x2b/0x40 [cfg80211]
[ 682.857961] cfg80211_netdev_notifier_call+0xa9/0x560 [cfg80211]
[ 682.858163] raw_notifier_call_chain+0x41/0x50
[ 682.858180] __dev_close_many+0x62/0x100
[ 682.858195] dev_close_many+0x7d/0x120
[ 682.858209] unregister_netdevice_many+0x416/0x680
[ 682.858225] unregister_netdevice_queue+0xab/0xf0
[ 682.858240] unregister_netdev+0x18/0x20
[ 682.858255] rtw_unregister_netdevs+0x28/0x40 [r8723bs]
[ 682.858360] rtw_dev_remove+0x24/0xd0 [r8723bs]
[ 682.858463] sdio_bus_remove+0x31/0xd0 [mmc_core]
[ 682.858532] device_release_driver_internal+0xf7/0x1d0
[ 682.858550] driver_detach+0x47/0x90
[ 682.858564] bus_remove_driver+0x77/0xd0
[ 682.858579] rtw_drv_halt+0xc/0x678 [r8723bs]
[ 682.858685] __x64_sys_delete_module+0x13f/0x250
[ 682.858699] do_syscall_64+0x3a/0x80
[ 682.858715] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 682.858729]
other info that might help us debug this:
[ 682.858737] Possible unsafe locking scenario:
[ 682.858744] CPU0 CPU1
[ 682.858751] ---- ----
[ 682.858758] lock(&pstapriv->sta_hash_lock);
[ 682.858772] lock(&pxmitpriv->lock);
[ 682.858786] lock(&pstapriv->sta_hash_lock);
[ 682.858799] lock(&pxmitpriv->lock);
[ 682.858812]
*** DEADLOCK ***
[ 682.858820] 5 locks held by modprobe/1770:
[ 682.858831] #0: ffff8d870697d980 (&dev->mutex){....}-{3:3},
at: device_release_driver_internal+0x1a/0x1d0
[ 682.858869] #1: ffffffffbdbbf1c8 (rtnl_mutex){+.+.}-{3:3},
at: unregister_netdev+0xe/0x20
[ 682.858906] #2: ffff8d87054ee5e8 (&rdev->wiphy.mtx){+.+.}-{3:3},
at: cfg80211_netdev_notifier_call+0x9e/0x560 [cfg80211]
[ 682.859131] #3: ffff8d870f2bc8f0 (&wdev->mtx){+.+.}-{3:3},
at: cfg80211_leave+0x20/0x40 [cfg80211]
[ 682.859354] #4: ffffb6d0003336a8 (&pstapriv->sta_hash_lock){+.-.}-{2:2},
at: rtw_free_assoc_resources+0x48/0x110 [r8723bs]
[ 682.859482]
stack backtrace:
[ 682.859491] CPU: 1 PID: 1770 Comm: modprobe Tainted: G
C OE 5.14.0-rc6+ #16
[ 682.859507] Hardware name: LENOVO 80NR/Madrid, BIOS DACN25WW 08/20/2015
[ 682.859517] Call Trace:
[ 682.859531] dump_stack_lvl+0x56/0x6f
[ 682.859551] check_noncircular+0xdb/0xf0
[ 682.859579] __lock_acquire+0xfd9/0x1b50
[ 682.859606] lock_acquire+0xb4/0x2c0
[ 682.859623] ? rtw_free_stainfo+0x52/0x4a0 [r8723bs]
[ 682.859752] ? mark_held_locks+0x48/0x70
[ 682.859769] ? rtw_free_stainfo+0x4a/0x4a0 [r8723bs]
[ 682.859898] _raw_spin_lock_bh+0x34/0x40
[ 682.859914] ? rtw_free_stainfo+0x52/0x4a0 [r8723bs]
[ 682.860039] rtw_free_stainfo+0x52/0x4a0 [r8723bs]
[ 682.860171] rtw_free_assoc_resources+0x53/0x110 [r8723bs]
[ 682.860286] cfg80211_rtw_disconnect+0x4b/0x70 [r8723bs]
[ 682.860397] cfg80211_disconnect+0x12e/0x2f0 [cfg80211]
[ 682.860629] cfg80211_leave+0x2b/0x40 [cfg80211]
[ 682.860836] cfg80211_netdev_notifier_call+0xa9/0x560 [cfg80211]
[ 682.861048] ? __lock_acquire+0x4dc/0x1b50
[ 682.861070] ? lock_is_held_type+0xa8/0x110
[ 682.861089] ? lock_is_held_type+0xa8/0x110
[ 682.861104] ? find_held_lock+0x2d/0x90
[ 682.861120] ? packet_notifier+0x173/0x300
[ 682.861141] ? lock_release+0xb3/0x250
[ 682.861160] ? packet_notifier+0x192/0x300
[ 682.861184] raw_notifier_call_chain+0x41/0x50
[ 682.861205] __dev_close_many+0x62/0x100
[ 682.861224] dev_close_many+0x7d/0x120
[ 682.861245] unregister_netdevice_many+0x416/0x680
[ 682.861264] ? find_held_lock+0x2d/0x90
[ 682.861284] unregister_netdevice_queue+0xab/0xf0
[ 682.861306] unregister_netdev+0x18/0x20
[ 682.861325] rtw_unregister_netdevs+0x28/0x40 [r8723bs]
[ 682.861434] rtw_dev_remove+0x24/0xd0 [r8723bs]
[ 682.861542] sdio_bus_remove+0x31/0xd0 [mmc_core]
[ 682.861615] device_release_driver_internal+0xf7/0x1d0
[ 682.861637] driver_detach+0x47/0x90
[ 682.861656] bus_remove_driver+0x77/0xd0
[ 682.861674] rtw_drv_halt+0xc/0x678 [r8723bs]
[ 682.861782] __x64_sys_delete_module+0x13f/0x250
[ 682.861801] ? lockdep_hardirqs_on_prepare+0xf3/0x170
[ 682.861817] ? syscall_enter_from_user_mode+0x20/0x70
[ 682.861836] do_syscall_64+0x3a/0x80
[ 682.861855] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 682.861873] RIP: 0033:0x7f6dbe85400b
[ 682.861890] Code: 73 01 c3 48 8b 0d 6d 1e 0c 00 f7 d8 64 89
01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa
b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 3d
1e 0c 00 f7 d8 64 89 01 48
[ 682.861906] RSP: 002b:00007ffe7a82f538 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
[ 682.861923] RAX: ffffffffffffffda RBX: 000055a64693bd20 RCX: 00007f6dbe85400b
[ 682.861935] RDX: 0000000000000000 RSI: 0000000000000800 RDI: 000055a64693bd88
[ 682.861946] RBP: 000055a64693bd20 R08: 0000000000000000 R09: 0000000000000000
[ 682.861957] R10: 00007f6dbe8c7ac0 R11: 0000000000000206 R12: 000055a64693bd88
[ 682.861967] R13: 0000000000000000 R14: 000055a64693bd88 R15: 00007ffe7a831848
This happens because when we enqueue a frame for
transmission we do it under xmit_priv lock, then calling
rtw_get_stainfo (needed for enqueuing) takes sta_hash_lock
and this leads to the following lock dependency:
xmit_priv->lock -> sta_hash_lock
Turning off a connection will bring to call
rtw_free_assoc_resources which will set up
the inverse dependency:
sta_hash_lock -> xmit_priv_lock
This could lead to a deadlock as lockdep complains.
Fix it by removing the xmit_priv->lock around
rtw_xmitframe_enqueue call inside rtl8723bs_hal_xmit
and put it in a smaller critical section inside
rtw_xmit_classifier, the only place where
xmit_priv data are actually accessed.
Replace spin_{lock,unlock}_bh(pxmitpriv->lock)
in other tx paths leading to rtw_xmitframe_enqueue
call with spin_{lock,unlock}_bh(psta->sleep_q.lock)
- it's not clear why accessing a sleep_q was protected
by a spinlock on xmitpriv->lock.
This way is avoided the same faulty lock nesting
order.
Extra changes in v2 by Hans de Goede:
-Lift the taking of the struct __queue.lock spinlock out of
rtw_free_xmitframe_queue() into the callers this allows also
protecting a bunch of related state in rtw_free_stainfo():
-Protect psta->sleepq_len on rtw_free_xmitframe_queue(&psta->sleep_q);
-Protect struct tx_servq.tx_pending and tx_servq.qcnt when
calling rtw_free_xmitframe_queue(&tx_servq.sta_pending)
-This also allows moving the spin_lock_bh(&pxmitpriv->lock); to below
the sleep_q free-ing code, avoiding another ABBA locking issue
CC: Larry Finger <[email protected]>
Co-developed-by: Hans de Goede <[email protected]>
Tested-on: Lenovo Ideapad MiiX 300-10IBY
Signed-off-by: Fabio Aiuto <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/staging/rtl8723bs/core/rtw_mlme_ext.c | 7 ++----
drivers/staging/rtl8723bs/core/rtw_recv.c | 10 +++------
drivers/staging/rtl8723bs/core/rtw_sta_mgt.c | 22 ++++++++++---------
drivers/staging/rtl8723bs/core/rtw_xmit.c | 16 ++++++--------
.../staging/rtl8723bs/hal/rtl8723bs_xmit.c | 2 --
5 files changed, 24 insertions(+), 33 deletions(-)
diff --git a/drivers/staging/rtl8723bs/core/rtw_mlme_ext.c b/drivers/staging/rtl8723bs/core/rtw_mlme_ext.c
index 375d2a742dd2d..a1ae16ec69eb6 100644
--- a/drivers/staging/rtl8723bs/core/rtw_mlme_ext.c
+++ b/drivers/staging/rtl8723bs/core/rtw_mlme_ext.c
@@ -5919,7 +5919,6 @@ u8 chk_bmc_sleepq_hdl(struct adapter *padapter, unsigned char *pbuf)
struct sta_info *psta_bmc;
struct list_head *xmitframe_plist, *xmitframe_phead, *tmp;
struct xmit_frame *pxmitframe = NULL;
- struct xmit_priv *pxmitpriv = &padapter->xmitpriv;
struct sta_priv *pstapriv = &padapter->stapriv;
/* for BC/MC Frames */
@@ -5930,8 +5929,7 @@ u8 chk_bmc_sleepq_hdl(struct adapter *padapter, unsigned char *pbuf)
if ((pstapriv->tim_bitmap&BIT(0)) && (psta_bmc->sleepq_len > 0)) {
msleep(10);/* 10ms, ATIM(HIQ) Windows */
- /* spin_lock_bh(&psta_bmc->sleep_q.lock); */
- spin_lock_bh(&pxmitpriv->lock);
+ spin_lock_bh(&psta_bmc->sleep_q.lock);
xmitframe_phead = get_list_head(&psta_bmc->sleep_q);
list_for_each_safe(xmitframe_plist, tmp, xmitframe_phead) {
@@ -5954,8 +5952,7 @@ u8 chk_bmc_sleepq_hdl(struct adapter *padapter, unsigned char *pbuf)
rtw_hal_xmitframe_enqueue(padapter, pxmitframe);
}
- /* spin_unlock_bh(&psta_bmc->sleep_q.lock); */
- spin_unlock_bh(&pxmitpriv->lock);
+ spin_unlock_bh(&psta_bmc->sleep_q.lock);
/* check hi queue and bmc_sleepq */
rtw_chk_hi_queue_cmd(padapter);
diff --git a/drivers/staging/rtl8723bs/core/rtw_recv.c b/drivers/staging/rtl8723bs/core/rtw_recv.c
index 5b0a596eefb77..3564e2af5741b 100644
--- a/drivers/staging/rtl8723bs/core/rtw_recv.c
+++ b/drivers/staging/rtl8723bs/core/rtw_recv.c
@@ -953,10 +953,8 @@ static signed int validate_recv_ctrl_frame(struct adapter *padapter, union recv_
if ((psta->state&WIFI_SLEEP_STATE) && (pstapriv->sta_dz_bitmap&BIT(psta->aid))) {
struct list_head *xmitframe_plist, *xmitframe_phead;
struct xmit_frame *pxmitframe = NULL;
- struct xmit_priv *pxmitpriv = &padapter->xmitpriv;
- /* spin_lock_bh(&psta->sleep_q.lock); */
- spin_lock_bh(&pxmitpriv->lock);
+ spin_lock_bh(&psta->sleep_q.lock);
xmitframe_phead = get_list_head(&psta->sleep_q);
xmitframe_plist = get_next(xmitframe_phead);
@@ -987,12 +985,10 @@ static signed int validate_recv_ctrl_frame(struct adapter *padapter, union recv_
update_beacon(padapter, WLAN_EID_TIM, NULL, true);
}
- /* spin_unlock_bh(&psta->sleep_q.lock); */
- spin_unlock_bh(&pxmitpriv->lock);
+ spin_unlock_bh(&psta->sleep_q.lock);
} else {
- /* spin_unlock_bh(&psta->sleep_q.lock); */
- spin_unlock_bh(&pxmitpriv->lock);
+ spin_unlock_bh(&psta->sleep_q.lock);
if (pstapriv->tim_bitmap&BIT(psta->aid)) {
if (psta->sleepq_len == 0) {
diff --git a/drivers/staging/rtl8723bs/core/rtw_sta_mgt.c b/drivers/staging/rtl8723bs/core/rtw_sta_mgt.c
index 67ca219f95bf8..c23d0c833ecf8 100644
--- a/drivers/staging/rtl8723bs/core/rtw_sta_mgt.c
+++ b/drivers/staging/rtl8723bs/core/rtw_sta_mgt.c
@@ -289,46 +289,48 @@ u32 rtw_free_stainfo(struct adapter *padapter, struct sta_info *psta)
/* list_del_init(&psta->wakeup_list); */
- spin_lock_bh(&pxmitpriv->lock);
-
+ spin_lock_bh(&psta->sleep_q.lock);
rtw_free_xmitframe_queue(pxmitpriv, &psta->sleep_q);
psta->sleepq_len = 0;
+ spin_unlock_bh(&psta->sleep_q.lock);
+
+ spin_lock_bh(&pxmitpriv->lock);
/* vo */
- /* spin_lock_bh(&(pxmitpriv->vo_pending.lock)); */
+ spin_lock_bh(&pstaxmitpriv->vo_q.sta_pending.lock);
rtw_free_xmitframe_queue(pxmitpriv, &pstaxmitpriv->vo_q.sta_pending);
list_del_init(&(pstaxmitpriv->vo_q.tx_pending));
phwxmit = pxmitpriv->hwxmits;
phwxmit->accnt -= pstaxmitpriv->vo_q.qcnt;
pstaxmitpriv->vo_q.qcnt = 0;
- /* spin_unlock_bh(&(pxmitpriv->vo_pending.lock)); */
+ spin_unlock_bh(&pstaxmitpriv->vo_q.sta_pending.lock);
/* vi */
- /* spin_lock_bh(&(pxmitpriv->vi_pending.lock)); */
+ spin_lock_bh(&pstaxmitpriv->vi_q.sta_pending.lock);
rtw_free_xmitframe_queue(pxmitpriv, &pstaxmitpriv->vi_q.sta_pending);
list_del_init(&(pstaxmitpriv->vi_q.tx_pending));
phwxmit = pxmitpriv->hwxmits+1;
phwxmit->accnt -= pstaxmitpriv->vi_q.qcnt;
pstaxmitpriv->vi_q.qcnt = 0;
- /* spin_unlock_bh(&(pxmitpriv->vi_pending.lock)); */
+ spin_unlock_bh(&pstaxmitpriv->vi_q.sta_pending.lock);
/* be */
- /* spin_lock_bh(&(pxmitpriv->be_pending.lock)); */
+ spin_lock_bh(&pstaxmitpriv->be_q.sta_pending.lock);
rtw_free_xmitframe_queue(pxmitpriv, &pstaxmitpriv->be_q.sta_pending);
list_del_init(&(pstaxmitpriv->be_q.tx_pending));
phwxmit = pxmitpriv->hwxmits+2;
phwxmit->accnt -= pstaxmitpriv->be_q.qcnt;
pstaxmitpriv->be_q.qcnt = 0;
- /* spin_unlock_bh(&(pxmitpriv->be_pending.lock)); */
+ spin_unlock_bh(&pstaxmitpriv->be_q.sta_pending.lock);
/* bk */
- /* spin_lock_bh(&(pxmitpriv->bk_pending.lock)); */
+ spin_lock_bh(&pstaxmitpriv->bk_q.sta_pending.lock);
rtw_free_xmitframe_queue(pxmitpriv, &pstaxmitpriv->bk_q.sta_pending);
list_del_init(&(pstaxmitpriv->bk_q.tx_pending));
phwxmit = pxmitpriv->hwxmits+3;
phwxmit->accnt -= pstaxmitpriv->bk_q.qcnt;
pstaxmitpriv->bk_q.qcnt = 0;
- /* spin_unlock_bh(&(pxmitpriv->bk_pending.lock)); */
+ spin_unlock_bh(&pstaxmitpriv->bk_q.sta_pending.lock);
spin_unlock_bh(&pxmitpriv->lock);
diff --git a/drivers/staging/rtl8723bs/core/rtw_xmit.c b/drivers/staging/rtl8723bs/core/rtw_xmit.c
index 79e4d7df1ef57..6b37b42ec2266 100644
--- a/drivers/staging/rtl8723bs/core/rtw_xmit.c
+++ b/drivers/staging/rtl8723bs/core/rtw_xmit.c
@@ -1723,15 +1723,12 @@ void rtw_free_xmitframe_queue(struct xmit_priv *pxmitpriv, struct __queue *pfram
struct list_head *plist, *phead, *tmp;
struct xmit_frame *pxmitframe;
- spin_lock_bh(&pframequeue->lock);
-
phead = get_list_head(pframequeue);
list_for_each_safe(plist, tmp, phead) {
pxmitframe = list_entry(plist, struct xmit_frame, list);
rtw_free_xmitframe(pxmitpriv, pxmitframe);
}
- spin_unlock_bh(&pframequeue->lock);
}
s32 rtw_xmitframe_enqueue(struct adapter *padapter, struct xmit_frame *pxmitframe)
@@ -1786,6 +1783,7 @@ s32 rtw_xmit_classifier(struct adapter *padapter, struct xmit_frame *pxmitframe)
struct sta_info *psta;
struct tx_servq *ptxservq;
struct pkt_attrib *pattrib = &pxmitframe->attrib;
+ struct xmit_priv *xmit_priv = &padapter->xmitpriv;
struct hw_xmit *phwxmits = padapter->xmitpriv.hwxmits;
signed int res = _SUCCESS;
@@ -1803,12 +1801,14 @@ s32 rtw_xmit_classifier(struct adapter *padapter, struct xmit_frame *pxmitframe)
ptxservq = rtw_get_sta_pending(padapter, psta, pattrib->priority, (u8 *)(&ac_index));
+ spin_lock_bh(&xmit_priv->lock);
if (list_empty(&ptxservq->tx_pending))
list_add_tail(&ptxservq->tx_pending, get_list_head(phwxmits[ac_index].sta_queue));
list_add_tail(&pxmitframe->list, get_list_head(&ptxservq->sta_pending));
ptxservq->qcnt++;
phwxmits[ac_index].accnt++;
+ spin_unlock_bh(&xmit_priv->lock);
exit:
@@ -2191,11 +2191,10 @@ void wakeup_sta_to_xmit(struct adapter *padapter, struct sta_info *psta)
struct list_head *xmitframe_plist, *xmitframe_phead, *tmp;
struct xmit_frame *pxmitframe = NULL;
struct sta_priv *pstapriv = &padapter->stapriv;
- struct xmit_priv *pxmitpriv = &padapter->xmitpriv;
psta_bmc = rtw_get_bcmc_stainfo(padapter);
- spin_lock_bh(&pxmitpriv->lock);
+ spin_lock_bh(&psta->sleep_q.lock);
xmitframe_phead = get_list_head(&psta->sleep_q);
list_for_each_safe(xmitframe_plist, tmp, xmitframe_phead) {
@@ -2296,7 +2295,7 @@ void wakeup_sta_to_xmit(struct adapter *padapter, struct sta_info *psta)
_exit:
- spin_unlock_bh(&pxmitpriv->lock);
+ spin_unlock_bh(&psta->sleep_q.lock);
if (update_mask)
update_beacon(padapter, WLAN_EID_TIM, NULL, true);
@@ -2308,9 +2307,8 @@ void xmit_delivery_enabled_frames(struct adapter *padapter, struct sta_info *pst
struct list_head *xmitframe_plist, *xmitframe_phead, *tmp;
struct xmit_frame *pxmitframe = NULL;
struct sta_priv *pstapriv = &padapter->stapriv;
- struct xmit_priv *pxmitpriv = &padapter->xmitpriv;
- spin_lock_bh(&pxmitpriv->lock);
+ spin_lock_bh(&psta->sleep_q.lock);
xmitframe_phead = get_list_head(&psta->sleep_q);
list_for_each_safe(xmitframe_plist, tmp, xmitframe_phead) {
@@ -2363,7 +2361,7 @@ void xmit_delivery_enabled_frames(struct adapter *padapter, struct sta_info *pst
}
}
- spin_unlock_bh(&pxmitpriv->lock);
+ spin_unlock_bh(&psta->sleep_q.lock);
}
void enqueue_pending_xmitbuf(struct xmit_priv *pxmitpriv, struct xmit_buf *pxmitbuf)
diff --git a/drivers/staging/rtl8723bs/hal/rtl8723bs_xmit.c b/drivers/staging/rtl8723bs/hal/rtl8723bs_xmit.c
index 156d6aba18ca1..5f5c4719b5868 100644
--- a/drivers/staging/rtl8723bs/hal/rtl8723bs_xmit.c
+++ b/drivers/staging/rtl8723bs/hal/rtl8723bs_xmit.c
@@ -507,9 +507,7 @@ s32 rtl8723bs_hal_xmit(
rtw_issue_addbareq_cmd(padapter, pxmitframe);
}
- spin_lock_bh(&pxmitpriv->lock);
err = rtw_xmitframe_enqueue(padapter, pxmitframe);
- spin_unlock_bh(&pxmitpriv->lock);
if (err != _SUCCESS) {
rtw_free_xmitframe(pxmitpriv, pxmitframe);
--
2.33.0
From: James Smart <[email protected]>
[ Upstream commit 79b20beccea3a3938a8500acef4e6b9d7c66142f ]
An error is detected with the following report when unloading the driver:
"KASAN: use-after-free in lpfc_unreg_rpi+0x1b1b"
The NLP_REG_LOGIN_SEND nlp_flag is set in lpfc_reg_fab_ctrl_node(), but the
flag is not cleared upon completion of the login.
This allows a second call to lpfc_unreg_rpi() to proceed with nlp_rpi set
to LPFC_RPI_ALLOW_ERROR. This results in a use after free access when used
as an rpi_ids array index.
Fix by clearing the NLP_REG_LOGIN_SEND nlp_flag in
lpfc_mbx_cmpl_fc_reg_login().
Link: https://lore.kernel.org/r/[email protected]
Co-developed-by: Justin Tee <[email protected]>
Signed-off-by: Justin Tee <[email protected]>
Signed-off-by: James Smart <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/lpfc/lpfc_hbadisc.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index 6f2e07c30f98f..e1c02229c82d9 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -4360,6 +4360,7 @@ lpfc_mbx_cmpl_fc_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
ndlp->nlp_state);
ndlp->nlp_flag |= NLP_RPI_REGISTERED;
+ ndlp->nlp_flag &= ~NLP_REG_LOGIN_SEND;
ndlp->nlp_type |= NLP_FABRIC;
lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNMAPPED_NODE);
--
2.33.0
From: Teng Qi <[email protected]>
[ Upstream commit 94be878c882d8d784ff44c639bf55f3b029f85af ]
The length of hw->settings->odr_table is 2 and ref_sensor->id is an enum
variable whose value is between 0 and 5.
However, the value ST_LSM6DSX_ID_MAX (i.e. 5) is not caught properly in
switch (sensor->id) {
If ref_sensor->id is ST_LSM6DSX_ID_MAX, an array overflow will ocurrs in
function st_lsm6dsx_check_odr():
odr_table = &sensor->hw->settings->odr_table[sensor->id];
and in function st_lsm6dsx_set_odr():
reg = &hw->settings->odr_table[ref_sensor->id].reg;
To avoid this array overflow, handle ST_LSM6DSX_ID_GYRO explicitly and
return -EINVAL for the default case.
The enum value ST_LSM6DSX_ID_MAX is only present as an easy way to check
the limit and as such is never used, however this is not locally obvious.
Reported-by: TOTE Robot <[email protected]>
Signed-off-by: Teng Qi <[email protected]>
Acked-by: Lorenzo Bianconi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
index db45f1fc0b817..8dbf744c5651f 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
@@ -1279,6 +1279,8 @@ st_lsm6dsx_set_odr(struct st_lsm6dsx_sensor *sensor, u32 req_odr)
int err;
switch (sensor->id) {
+ case ST_LSM6DSX_ID_GYRO:
+ break;
case ST_LSM6DSX_ID_EXT0:
case ST_LSM6DSX_ID_EXT1:
case ST_LSM6DSX_ID_EXT2:
@@ -1304,8 +1306,8 @@ st_lsm6dsx_set_odr(struct st_lsm6dsx_sensor *sensor, u32 req_odr)
}
break;
}
- default:
- break;
+ default: /* should never occur */
+ return -EINVAL;
}
if (req_odr > 0) {
--
2.33.0
From: James Smart <[email protected]>
[ Upstream commit 1854f53ccd88ad4e7568ddfafafffe71f1ceb0a6 ]
If an FC link down transition while PLOGIs are outstanding to fabric well
known addresses, outstanding ABTS requests may result in a NULL pointer
dereference. Driver unload requests may hang with repeated "2878" log
messages.
The Link down processing results in ABTS requests for outstanding ELS
requests. The Abort WQEs are sent for the ELSs before the driver had set
the link state to down. Thus the driver is sending the Abort with the
expectation that an ABTS will be sent on the wire. The Abort request is
stalled waiting for the link to come up. In some conditions the driver may
auto-complete the ELSs thus if the link does come up, the Abort completions
may reference an invalid structure.
Fix by ensuring that Abort set the flag to avoid link traffic if issued due
to conditions where the link failed.
Link: https://lore.kernel.org/r/[email protected]
Co-developed-by: Justin Tee <[email protected]>
Signed-off-by: Justin Tee <[email protected]>
Signed-off-by: James Smart <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/lpfc/lpfc_sli.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 8e689f06afc92..9c1f485952ef7 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -12404,17 +12404,17 @@ lpfc_sli_issue_abort_iotag(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
/* ABTS WQE must go to the same WQ as the WQE to be aborted */
abtsiocbp->hba_wqidx = cmdiocb->hba_wqidx;
- if (cmdiocb->iocb_flag & LPFC_IO_FCP) {
- abtsiocbp->iocb_flag |= LPFC_IO_FCP;
- abtsiocbp->iocb_flag |= LPFC_USE_FCPWQIDX;
- }
+ if (cmdiocb->iocb_flag & LPFC_IO_FCP)
+ abtsiocbp->iocb_flag |= (LPFC_IO_FCP | LPFC_USE_FCPWQIDX);
if (cmdiocb->iocb_flag & LPFC_IO_FOF)
abtsiocbp->iocb_flag |= LPFC_IO_FOF;
- if (phba->link_state >= LPFC_LINK_UP)
- iabt->ulpCommand = CMD_ABORT_XRI_CN;
- else
+ if (phba->link_state < LPFC_LINK_UP ||
+ (phba->sli_rev == LPFC_SLI_REV4 &&
+ phba->sli4_hba.link_state.status == LPFC_FC_LA_TYPE_LINK_DOWN))
iabt->ulpCommand = CMD_CLOSE_XRI_CN;
+ else
+ iabt->ulpCommand = CMD_ABORT_XRI_CN;
if (cmpl)
abtsiocbp->iocb_cmpl = cmpl;
--
2.33.0
From: Dmitry Osipenko <[email protected]>
[ Upstream commit 14b43c20c283de36131da0cb44f3170b9ffa7630 ]
Tegra20 EMC driver uses simple devfreq governor. Add simple devfreq
governor to the list of the Tegra20 EMC driver module softdeps to allow
userspace initramfs tools like dracut to automatically pull the devfreq
module into ramfs image together with the EMC module.
Reported-by: Nicolas Chauvet <[email protected]>
Suggested-by: Nicolas Chauvet <[email protected]>
Signed-off-by: Dmitry Osipenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/memory/tegra/tegra20-emc.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/memory/tegra/tegra20-emc.c b/drivers/memory/tegra/tegra20-emc.c
index c3462dbc8c22b..6fc90f2160e93 100644
--- a/drivers/memory/tegra/tegra20-emc.c
+++ b/drivers/memory/tegra/tegra20-emc.c
@@ -1117,4 +1117,5 @@ module_platform_driver(tegra_emc_driver);
MODULE_AUTHOR("Dmitry Osipenko <[email protected]>");
MODULE_DESCRIPTION("NVIDIA Tegra20 EMC driver");
+MODULE_SOFTDEP("pre: governor_simpleondemand");
MODULE_LICENSE("GPL v2");
--
2.33.0
From: David Heidelberg <[email protected]>
[ Upstream commit 14a1f6c9d8017ffbf388e82e1a1f023196d98612 ]
Fixes warnings regarding to memory and mdio nodes and
apply new naming following dt-schema.
Signed-off-by: David Heidelberg <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/qcom-ipq8064-rb3011.dts | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
index f7ea2e5dd1914..971d2e2292600 100644
--- a/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
+++ b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
@@ -19,12 +19,12 @@
stdout-path = "serial0:115200n8";
};
- memory@0 {
+ memory@42000000 {
reg = <0x42000000 0x3e000000>;
device_type = "memory";
};
- mdio0: mdio@0 {
+ mdio0: mdio-0 {
status = "okay";
compatible = "virtual,mdio-gpio";
gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>,
@@ -91,7 +91,7 @@
};
};
- mdio1: mdio@1 {
+ mdio1: mdio-1 {
status = "okay";
compatible = "virtual,mdio-gpio";
gpios = <&qcom_pinmux 11 GPIO_ACTIVE_HIGH>,
--
2.33.0
From: Sven Peter <[email protected]>
[ Upstream commit b7a0a63f3fed57d413bb857de164ea9c3984bc4e ]
Calling tps6598x_block_read with a higher than allowed len can be
handled by just returning an error. There's no need to crash systems
with panic-on-warn enabled.
Reviewed-by: Heikki Krogerus <[email protected]>
Signed-off-by: Sven Peter <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/typec/tipd/core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/typec/tipd/core.c b/drivers/usb/typec/tipd/core.c
index ea4cc0a6e40cc..97f50f301f13b 100644
--- a/drivers/usb/typec/tipd/core.c
+++ b/drivers/usb/typec/tipd/core.c
@@ -117,7 +117,7 @@ tps6598x_block_read(struct tps6598x *tps, u8 reg, void *val, size_t len)
u8 data[TPS_MAX_LEN + 1];
int ret;
- if (WARN_ON(len + 1 > sizeof(data)))
+ if (len + 1 > sizeof(data))
return -EINVAL;
if (!tps->i2c_protocol)
--
2.33.0
From: José Expósito <[email protected]>
[ Upstream commit 08b9a61a87bc339a73c584d8924c86ab36d204a7 ]
When a finger is on the screen, the UPERFECT Y portable touchscreen
monitor reports a contact in the first place. However, after this
initial report, contacts are not reported at the refresh rate of the
screen as required by the Windows 8 specs.
This behaviour triggers the release_timer, removing the fingers even
though they are still present.
To avoid it, add a new class, similar to MT_CLS_WIN_8 but without the
MT_QUIRK_STICKY_FINGERS quirk for this device.
Suggested-by: Benjamin Tissoires <[email protected]>
Signed-off-by: José Expósito <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hid/hid-ids.h | 3 +++
drivers/hid/hid-multitouch.c | 13 +++++++++++++
2 files changed, 16 insertions(+)
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index 29564b370341e..3706c635b12ee 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -1276,6 +1276,9 @@
#define USB_DEVICE_ID_WEIDA_8752 0xC300
#define USB_DEVICE_ID_WEIDA_8755 0xC301
+#define USB_VENDOR_ID_WINBOND 0x0416
+#define USB_DEVICE_ID_TSTP_MTOUCH 0xc168
+
#define USB_VENDOR_ID_WISEGROUP 0x0925
#define USB_DEVICE_ID_SMARTJOY_PLUS 0x0005
#define USB_DEVICE_ID_SUPER_JOY_BOX_3 0x8888
diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c
index 3ea7cb1cda84c..e1afddb7b33d8 100644
--- a/drivers/hid/hid-multitouch.c
+++ b/drivers/hid/hid-multitouch.c
@@ -193,6 +193,7 @@ static void mt_post_parse(struct mt_device *td, struct mt_application *app);
/* reserved 0x0014 */
#define MT_CLS_WIN_8_FORCE_MULTI_INPUT 0x0015
#define MT_CLS_WIN_8_DISABLE_WAKEUP 0x0016
+#define MT_CLS_WIN_8_NO_STICKY_FINGERS 0x0017
/* vendor specific classes */
#define MT_CLS_3M 0x0101
@@ -294,6 +295,13 @@ static const struct mt_class mt_classes[] = {
MT_QUIRK_WIN8_PTP_BUTTONS |
MT_QUIRK_DISABLE_WAKEUP,
.export_all_inputs = true },
+ { .name = MT_CLS_WIN_8_NO_STICKY_FINGERS,
+ .quirks = MT_QUIRK_ALWAYS_VALID |
+ MT_QUIRK_IGNORE_DUPLICATES |
+ MT_QUIRK_HOVERING |
+ MT_QUIRK_CONTACT_CNT_ACCURATE |
+ MT_QUIRK_WIN8_PTP_BUTTONS,
+ .export_all_inputs = true },
/*
* vendor specific classes
@@ -2120,6 +2128,11 @@ static const struct hid_device_id mt_devices[] = {
MT_USB_DEVICE(USB_VENDOR_ID_VTL,
USB_DEVICE_ID_VTL_MULTITOUCH_FF3F) },
+ /* Winbond Electronics Corp. */
+ { .driver_data = MT_CLS_WIN_8_NO_STICKY_FINGERS,
+ HID_DEVICE(HID_BUS_ANY, HID_GROUP_MULTITOUCH_WIN_8,
+ USB_VENDOR_ID_WINBOND, USB_DEVICE_ID_TSTP_MTOUCH) },
+
/* Wistron panels */
{ .driver_data = MT_CLS_NSMU,
MT_USB_DEVICE(USB_VENDOR_ID_WISTRON,
--
2.33.0
From: Bart Van Assche <[email protected]>
[ Upstream commit c91cf42f61dc77b289784ea7b15a8531defa41c0 ]
This patch fixes the following gcc 10 build error:
arch/mips/sni/time.c: In function ‘a20r_set_periodic’:
arch/mips/sni/time.c:15:26: error: unsigned conversion from ‘int’ to ‘u8’ {aka ‘volatile unsigned char’} changes value from ‘576’ to ‘64’ [-Werror=overflow]
15 | #define SNI_COUNTER0_DIV ((SNI_CLOCK_TICK_RATE / SNI_COUNTER2_DIV) / HZ)
| ^
arch/mips/sni/time.c:21:45: note: in expansion of macro ‘SNI_COUNTER0_DIV’
21 | *(volatile u8 *)(A20R_PT_CLOCK_BASE + 0) = SNI_COUNTER0_DIV;
| ^~~~~~~~~~~~~~~~
Cc: [email protected]
Signed-off-by: Bart Van Assche <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/mips/sni/time.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/mips/sni/time.c b/arch/mips/sni/time.c
index 240bb68ec2478..ff3ba7e778901 100644
--- a/arch/mips/sni/time.c
+++ b/arch/mips/sni/time.c
@@ -18,14 +18,14 @@ static int a20r_set_periodic(struct clock_event_device *evt)
{
*(volatile u8 *)(A20R_PT_CLOCK_BASE + 12) = 0x34;
wmb();
- *(volatile u8 *)(A20R_PT_CLOCK_BASE + 0) = SNI_COUNTER0_DIV;
+ *(volatile u8 *)(A20R_PT_CLOCK_BASE + 0) = SNI_COUNTER0_DIV & 0xff;
wmb();
*(volatile u8 *)(A20R_PT_CLOCK_BASE + 0) = SNI_COUNTER0_DIV >> 8;
wmb();
*(volatile u8 *)(A20R_PT_CLOCK_BASE + 12) = 0xb4;
wmb();
- *(volatile u8 *)(A20R_PT_CLOCK_BASE + 8) = SNI_COUNTER2_DIV;
+ *(volatile u8 *)(A20R_PT_CLOCK_BASE + 8) = SNI_COUNTER2_DIV & 0xff;
wmb();
*(volatile u8 *)(A20R_PT_CLOCK_BASE + 8) = SNI_COUNTER2_DIV >> 8;
wmb();
--
2.33.0
From: Linus Walleij <[email protected]>
[ Upstream commit 7aee0288beab72cdfa35af51f62e94373fca595d ]
AUX2 has slightly wrong voltage and AUX5 doesn't need to be
always on.
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/ste-ux500-samsung-skomer.dts | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts
index 264f3e9b5fce5..86e83639fadc1 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts
@@ -292,10 +292,10 @@
};
ab8500_ldo_aux2 {
- /* Supplies the Cypress TMA140 touchscreen only with 3.3V */
+ /* Supplies the Cypress TMA140 touchscreen only with 3.0V */
regulator-name = "AUX2";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
};
ab8500_ldo_aux3 {
@@ -314,9 +314,9 @@
ab8500_ldo_aux5 {
regulator-name = "AUX5";
+ /* Intended for 1V8 for touchscreen but actually left unused */
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <2790000>;
- regulator-always-on;
};
ab8500_ldo_aux6 {
--
2.33.0
From: Ye Bin <[email protected]>
[ Upstream commit 4e3ace0051e7e504b55d239daab8789dd89b863c ]
The following warning was observed running syzkaller:
[ 3813.830724] sg_write: data in/out 65466/242 bytes for SCSI command 0x9e-- guessing data in;
[ 3813.830724] program syz-executor not setting count and/or reply_len properly
[ 3813.836956] ==================================================================
[ 3813.839465] BUG: KASAN: stack-out-of-bounds in sg_copy_buffer+0x157/0x1e0
[ 3813.841773] Read of size 4096 at addr ffff8883cf80f540 by task syz-executor/1549
[ 3813.846612] Call Trace:
[ 3813.846995] dump_stack+0x108/0x15f
[ 3813.847524] print_address_description+0xa5/0x372
[ 3813.848243] kasan_report.cold+0x236/0x2a8
[ 3813.849439] check_memory_region+0x240/0x270
[ 3813.850094] memcpy+0x30/0x80
[ 3813.850553] sg_copy_buffer+0x157/0x1e0
[ 3813.853032] sg_copy_from_buffer+0x13/0x20
[ 3813.853660] fill_from_dev_buffer+0x135/0x370
[ 3813.854329] resp_readcap16+0x1ac/0x280
[ 3813.856917] schedule_resp+0x41f/0x1630
[ 3813.858203] scsi_debug_queuecommand+0xb32/0x17e0
[ 3813.862699] scsi_dispatch_cmd+0x330/0x950
[ 3813.863329] scsi_request_fn+0xd8e/0x1710
[ 3813.863946] __blk_run_queue+0x10b/0x230
[ 3813.864544] blk_execute_rq_nowait+0x1d8/0x400
[ 3813.865220] sg_common_write.isra.0+0xe61/0x2420
[ 3813.871637] sg_write+0x6c8/0xef0
[ 3813.878853] __vfs_write+0xe4/0x800
[ 3813.883487] vfs_write+0x17b/0x530
[ 3813.884008] ksys_write+0x103/0x270
[ 3813.886268] __x64_sys_write+0x77/0xc0
[ 3813.886841] do_syscall_64+0x106/0x360
[ 3813.887415] entry_SYSCALL_64_after_hwframe+0x44/0xa9
This issue can be reproduced with the following syzkaller log:
r0 = openat(0xffffffffffffff9c, &(0x7f0000000040)='./file0\x00', 0x26e1, 0x0)
r1 = syz_open_procfs(0xffffffffffffffff, &(0x7f0000000000)='fd/3\x00')
open_by_handle_at(r1, &(0x7f00000003c0)=ANY=[@ANYRESHEX], 0x602000)
r2 = syz_open_dev$sg(&(0x7f0000000000), 0x0, 0x40782)
write$binfmt_aout(r2, &(0x7f0000000340)=ANY=[@ANYBLOB="00000000deff000000000000000000000000000000000000000000000000000047f007af9e107a41ec395f1bded7be24277a1501ff6196a83366f4e6362bc0ff2b247f68a972989b094b2da4fb3607fcf611a22dd04310d28c75039d"], 0x126)
In resp_readcap16() we get "int alloc_len" value -1104926854, and then pass
the huge arr_len to fill_from_dev_buffer(), but arr is only 32 bytes. This
leads to OOB in sg_copy_buffer().
To solve this issue, define alloc_len as u32.
Link: https://lore.kernel.org/r/[email protected]
Acked-by: Douglas Gilbert <[email protected]>
Signed-off-by: Ye Bin <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/scsi_debug.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c
index 66f507469a31a..be04405457447 100644
--- a/drivers/scsi/scsi_debug.c
+++ b/drivers/scsi/scsi_debug.c
@@ -1856,7 +1856,7 @@ static int resp_readcap16(struct scsi_cmnd *scp,
{
unsigned char *cmd = scp->cmnd;
unsigned char arr[SDEBUG_READCAP16_ARR_SZ];
- int alloc_len;
+ u32 alloc_len;
alloc_len = get_unaligned_be32(cmd + 10);
/* following just in case virtual_gb changed */
@@ -1885,7 +1885,7 @@ static int resp_readcap16(struct scsi_cmnd *scp,
}
return fill_from_dev_buffer(scp, arr,
- min_t(int, alloc_len, SDEBUG_READCAP16_ARR_SZ));
+ min_t(u32, alloc_len, SDEBUG_READCAP16_ARR_SZ));
}
#define SDEBUG_MAX_TGTPGS_ARR_SZ 1412
--
2.33.0
From: Ye Bin <[email protected]>
[ Upstream commit f347c26836c270199de1599c3cd466bb7747caa9 ]
The following issue was observed running syzkaller:
BUG: KASAN: slab-out-of-bounds in memcpy include/linux/string.h:377 [inline]
BUG: KASAN: slab-out-of-bounds in sg_copy_buffer+0x150/0x1c0 lib/scatterlist.c:831
Read of size 2132 at addr ffff8880aea95dc8 by task syz-executor.0/9815
CPU: 0 PID: 9815 Comm: syz-executor.0 Not tainted 4.19.202-00874-gfc0fe04215a9 #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0xe4/0x14a lib/dump_stack.c:118
print_address_description+0x73/0x280 mm/kasan/report.c:253
kasan_report_error mm/kasan/report.c:352 [inline]
kasan_report+0x272/0x370 mm/kasan/report.c:410
memcpy+0x1f/0x50 mm/kasan/kasan.c:302
memcpy include/linux/string.h:377 [inline]
sg_copy_buffer+0x150/0x1c0 lib/scatterlist.c:831
fill_from_dev_buffer+0x14f/0x340 drivers/scsi/scsi_debug.c:1021
resp_report_tgtpgs+0x5aa/0x770 drivers/scsi/scsi_debug.c:1772
schedule_resp+0x464/0x12f0 drivers/scsi/scsi_debug.c:4429
scsi_debug_queuecommand+0x467/0x1390 drivers/scsi/scsi_debug.c:5835
scsi_dispatch_cmd+0x3fc/0x9b0 drivers/scsi/scsi_lib.c:1896
scsi_request_fn+0x1042/0x1810 drivers/scsi/scsi_lib.c:2034
__blk_run_queue_uncond block/blk-core.c:464 [inline]
__blk_run_queue+0x1a4/0x380 block/blk-core.c:484
blk_execute_rq_nowait+0x1c2/0x2d0 block/blk-exec.c:78
sg_common_write.isra.19+0xd74/0x1dc0 drivers/scsi/sg.c:847
sg_write.part.23+0x6e0/0xd00 drivers/scsi/sg.c:716
sg_write+0x64/0xa0 drivers/scsi/sg.c:622
__vfs_write+0xed/0x690 fs/read_write.c:485
kill_bdev:block_device:00000000e138492c
vfs_write+0x184/0x4c0 fs/read_write.c:549
ksys_write+0x107/0x240 fs/read_write.c:599
do_syscall_64+0xc2/0x560 arch/x86/entry/common.c:293
entry_SYSCALL_64_after_hwframe+0x49/0xbe
We get 'alen' from command its type is int. If userspace passes a large
length we will get a negative 'alen'.
Switch n, alen, and rlen to u32.
Link: https://lore.kernel.org/r/[email protected]
Acked-by: Douglas Gilbert <[email protected]>
Signed-off-by: Ye Bin <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/scsi_debug.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c
index be04405457447..ead65cdfb522e 100644
--- a/drivers/scsi/scsi_debug.c
+++ b/drivers/scsi/scsi_debug.c
@@ -1896,8 +1896,9 @@ static int resp_report_tgtpgs(struct scsi_cmnd *scp,
unsigned char *cmd = scp->cmnd;
unsigned char *arr;
int host_no = devip->sdbg_host->shost->host_no;
- int n, ret, alen, rlen;
int port_group_a, port_group_b, port_a, port_b;
+ u32 alen, n, rlen;
+ int ret;
alen = get_unaligned_be32(cmd + 6);
arr = kzalloc(SDEBUG_MAX_TGTPGS_ARR_SZ, GFP_ATOMIC);
@@ -1959,9 +1960,9 @@ static int resp_report_tgtpgs(struct scsi_cmnd *scp,
* - The constructed command length
* - The maximum array size
*/
- rlen = min_t(int, alen, n);
+ rlen = min(alen, n);
ret = fill_from_dev_buffer(scp, arr,
- min_t(int, rlen, SDEBUG_MAX_TGTPGS_ARR_SZ));
+ min_t(u32, rlen, SDEBUG_MAX_TGTPGS_ARR_SZ));
kfree(arr);
return ret;
}
--
2.33.0
From: Mike Christie <[email protected]>
[ Upstream commit ed1227e080990ffec5bf39006ec8a57358e6689a ]
This patch fixes the following bugs:
1. If there are multiple ordered cmds queued and multiple simple cmds
completing, target_restart_delayed_cmds() could be called on different
CPUs and each instance could start a ordered cmd. They could then run in
different orders than they were queued.
2. target_restart_delayed_cmds() and target_handle_task_attr() can race
where:
1. target_handle_task_attr() has passed the simple_cmds == 0 check.
2. transport_complete_task_attr() then decrements simple_cmds to 0.
3. transport_complete_task_attr() runs target_restart_delayed_cmds() and
it does not see any cmds on the delayed_cmd_list.
4. target_handle_task_attr() adds the cmd to the delayed_cmd_list.
The cmd will then end up timing out.
3. If we are sent > 1 ordered cmds and simple_cmds == 0, we can execute
them out of order, because target_handle_task_attr() will hit that
simple_cmds check first and return false for all ordered cmds sent.
4. We run target_restart_delayed_cmds() after every cmd completion, so if
there is more than 1 simple cmd running, we start executing ordered cmds
after that first cmd instead of waiting for all of them to complete.
5. Ordered cmds are not supposed to start until HEAD OF QUEUE and all older
cmds have completed, and not just simple.
6. It's not a bug but it doesn't make sense to take the delayed_cmd_lock
for every cmd completion when ordered cmds are almost never used. Just
replacing that lock with an atomic increases IOPs by up to 10% when
completions are spread over multiple CPUs and there are multiple
sessions/ mqs/thread accessing the same device.
This patch moves the queued delayed handling to a per device work to
serialze the cmd executions for each device and adds a new counter to track
HEAD_OF_QUEUE and SIMPLE cmds. We can then check the new counter to
determine when to run the work on the completion path.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mike Christie <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/target/target_core_device.c | 2 +
drivers/target/target_core_internal.h | 1 +
drivers/target/target_core_transport.c | 76 ++++++++++++++++++--------
include/target/target_core_base.h | 6 +-
4 files changed, 61 insertions(+), 24 deletions(-)
diff --git a/drivers/target/target_core_device.c b/drivers/target/target_core_device.c
index 8cb1fa0c05857..44bb380e7390c 100644
--- a/drivers/target/target_core_device.c
+++ b/drivers/target/target_core_device.c
@@ -772,6 +772,8 @@ struct se_device *target_alloc_device(struct se_hba *hba, const char *name)
INIT_LIST_HEAD(&dev->t10_alua.lba_map_list);
spin_lock_init(&dev->t10_alua.lba_map_lock);
+ INIT_WORK(&dev->delayed_cmd_work, target_do_delayed_work);
+
dev->t10_wwn.t10_dev = dev;
/*
* Use OpenFabrics IEEE Company ID: 00 14 05
diff --git a/drivers/target/target_core_internal.h b/drivers/target/target_core_internal.h
index a343bcfa2180f..a889a6237d9c1 100644
--- a/drivers/target/target_core_internal.h
+++ b/drivers/target/target_core_internal.h
@@ -151,6 +151,7 @@ int transport_dump_vpd_ident(struct t10_vpd *, unsigned char *, int);
void transport_clear_lun_ref(struct se_lun *);
sense_reason_t target_cmd_size_check(struct se_cmd *cmd, unsigned int size);
void target_qf_do_work(struct work_struct *work);
+void target_do_delayed_work(struct work_struct *work);
bool target_check_wce(struct se_device *dev);
bool target_check_fua(struct se_device *dev);
void __target_execute_cmd(struct se_cmd *, bool);
diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c
index e60abd230e90f..72edf5bd75ee6 100644
--- a/drivers/target/target_core_transport.c
+++ b/drivers/target/target_core_transport.c
@@ -2189,32 +2189,35 @@ static bool target_handle_task_attr(struct se_cmd *cmd)
*/
switch (cmd->sam_task_attr) {
case TCM_HEAD_TAG:
+ atomic_inc_mb(&dev->non_ordered);
pr_debug("Added HEAD_OF_QUEUE for CDB: 0x%02x\n",
cmd->t_task_cdb[0]);
return false;
case TCM_ORDERED_TAG:
- atomic_inc_mb(&dev->dev_ordered_sync);
+ atomic_inc_mb(&dev->delayed_cmd_count);
pr_debug("Added ORDERED for CDB: 0x%02x to ordered list\n",
cmd->t_task_cdb[0]);
-
- /*
- * Execute an ORDERED command if no other older commands
- * exist that need to be completed first.
- */
- if (!atomic_read(&dev->simple_cmds))
- return false;
break;
default:
/*
* For SIMPLE and UNTAGGED Task Attribute commands
*/
- atomic_inc_mb(&dev->simple_cmds);
+ atomic_inc_mb(&dev->non_ordered);
+
+ if (atomic_read(&dev->delayed_cmd_count) == 0)
+ return false;
break;
}
- if (atomic_read(&dev->dev_ordered_sync) == 0)
- return false;
+ if (cmd->sam_task_attr != TCM_ORDERED_TAG) {
+ atomic_inc_mb(&dev->delayed_cmd_count);
+ /*
+ * We will account for this when we dequeue from the delayed
+ * list.
+ */
+ atomic_dec_mb(&dev->non_ordered);
+ }
spin_lock(&dev->delayed_cmd_lock);
list_add_tail(&cmd->se_delayed_node, &dev->delayed_cmd_list);
@@ -2222,6 +2225,12 @@ static bool target_handle_task_attr(struct se_cmd *cmd)
pr_debug("Added CDB: 0x%02x Task Attr: 0x%02x to delayed CMD listn",
cmd->t_task_cdb[0], cmd->sam_task_attr);
+ /*
+ * We may have no non ordered cmds when this function started or we
+ * could have raced with the last simple/head cmd completing, so kick
+ * the delayed handler here.
+ */
+ schedule_work(&dev->delayed_cmd_work);
return true;
}
@@ -2259,29 +2268,48 @@ EXPORT_SYMBOL(target_execute_cmd);
* Process all commands up to the last received ORDERED task attribute which
* requires another blocking boundary
*/
-static void target_restart_delayed_cmds(struct se_device *dev)
+void target_do_delayed_work(struct work_struct *work)
{
- for (;;) {
+ struct se_device *dev = container_of(work, struct se_device,
+ delayed_cmd_work);
+
+ spin_lock(&dev->delayed_cmd_lock);
+ while (!dev->ordered_sync_in_progress) {
struct se_cmd *cmd;
- spin_lock(&dev->delayed_cmd_lock);
- if (list_empty(&dev->delayed_cmd_list)) {
- spin_unlock(&dev->delayed_cmd_lock);
+ if (list_empty(&dev->delayed_cmd_list))
break;
- }
cmd = list_entry(dev->delayed_cmd_list.next,
struct se_cmd, se_delayed_node);
+
+ if (cmd->sam_task_attr == TCM_ORDERED_TAG) {
+ /*
+ * Check if we started with:
+ * [ordered] [simple] [ordered]
+ * and we are now at the last ordered so we have to wait
+ * for the simple cmd.
+ */
+ if (atomic_read(&dev->non_ordered) > 0)
+ break;
+
+ dev->ordered_sync_in_progress = true;
+ }
+
list_del(&cmd->se_delayed_node);
+ atomic_dec_mb(&dev->delayed_cmd_count);
spin_unlock(&dev->delayed_cmd_lock);
+ if (cmd->sam_task_attr != TCM_ORDERED_TAG)
+ atomic_inc_mb(&dev->non_ordered);
+
cmd->transport_state |= CMD_T_SENT;
__target_execute_cmd(cmd, true);
- if (cmd->sam_task_attr == TCM_ORDERED_TAG)
- break;
+ spin_lock(&dev->delayed_cmd_lock);
}
+ spin_unlock(&dev->delayed_cmd_lock);
}
/*
@@ -2299,14 +2327,17 @@ static void transport_complete_task_attr(struct se_cmd *cmd)
goto restart;
if (cmd->sam_task_attr == TCM_SIMPLE_TAG) {
- atomic_dec_mb(&dev->simple_cmds);
+ atomic_dec_mb(&dev->non_ordered);
dev->dev_cur_ordered_id++;
} else if (cmd->sam_task_attr == TCM_HEAD_TAG) {
+ atomic_dec_mb(&dev->non_ordered);
dev->dev_cur_ordered_id++;
pr_debug("Incremented dev_cur_ordered_id: %u for HEAD_OF_QUEUE\n",
dev->dev_cur_ordered_id);
} else if (cmd->sam_task_attr == TCM_ORDERED_TAG) {
- atomic_dec_mb(&dev->dev_ordered_sync);
+ spin_lock(&dev->delayed_cmd_lock);
+ dev->ordered_sync_in_progress = false;
+ spin_unlock(&dev->delayed_cmd_lock);
dev->dev_cur_ordered_id++;
pr_debug("Incremented dev_cur_ordered_id: %u for ORDERED\n",
@@ -2315,7 +2346,8 @@ static void transport_complete_task_attr(struct se_cmd *cmd)
cmd->se_cmd_flags &= ~SCF_TASK_ATTR_SET;
restart:
- target_restart_delayed_cmds(dev);
+ if (atomic_read(&dev->delayed_cmd_count) > 0)
+ schedule_work(&dev->delayed_cmd_work);
}
static void transport_complete_qf(struct se_cmd *cmd)
diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h
index fb11c7693b257..2121a323fd6c3 100644
--- a/include/target/target_core_base.h
+++ b/include/target/target_core_base.h
@@ -812,8 +812,9 @@ struct se_device {
atomic_long_t read_bytes;
atomic_long_t write_bytes;
/* Active commands on this virtual SE device */
- atomic_t simple_cmds;
- atomic_t dev_ordered_sync;
+ atomic_t non_ordered;
+ bool ordered_sync_in_progress;
+ atomic_t delayed_cmd_count;
atomic_t dev_qf_count;
u32 export_count;
spinlock_t delayed_cmd_lock;
@@ -834,6 +835,7 @@ struct se_device {
struct list_head dev_sep_list;
struct list_head dev_tmr_list;
struct work_struct qf_work_queue;
+ struct work_struct delayed_cmd_work;
struct list_head delayed_cmd_list;
struct list_head qf_cmd_list;
/* Pointer to associated SE HBA */
--
2.33.0
From: Mike Christie <[email protected]>
[ Upstream commit 1283c0d1a32bb924324481586b5d6e8e76f676ba ]
We can't free the tg_pt_gp in core_alua_set_tg_pt_gp_id() because it's
still accessed via configfs. Its release must go through the normal
configfs/refcount process.
The max alua_tg_pt_gps_count check should probably have been done in
core_alua_allocate_tg_pt_gp(), but with the current code userspace could
have created 0x0000ffff + 1 groups, but only set the id for 0x0000ffff.
Then it could have deleted a group with an ID set, and then set the ID for
that extra group and it would work ok.
It's unlikely, but just in case this patch continues to allow that type of
behavior, and just fixes the kfree() while in use bug.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mike Christie <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/target/target_core_alua.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/target/target_core_alua.c b/drivers/target/target_core_alua.c
index cb1de1ecaaa61..bd0f2ce011dd7 100644
--- a/drivers/target/target_core_alua.c
+++ b/drivers/target/target_core_alua.c
@@ -1674,7 +1674,6 @@ int core_alua_set_tg_pt_gp_id(
pr_err("Maximum ALUA alua_tg_pt_gps_count:"
" 0x0000ffff reached\n");
spin_unlock(&dev->t10_alua.tg_pt_gps_lock);
- kmem_cache_free(t10_alua_tg_pt_gp_cache, tg_pt_gp);
return -ENOSPC;
}
again:
--
2.33.0
From: James Smart <[email protected]>
[ Upstream commit af984c87293b19dccbd0b16afc57c5c9a4a279c7 ]
A link bounce to a slow fabric may observe FDISC response delays lasting
longer than devloss tmo. Current logic decrements the final fabric node
kref during a devloss tmo event. This results in a NULL ptr dereference
crash if the FDISC completes for that fabric node after devloss tmo.
Fix by adding the NLP_IN_RECOV_POST_DEV_LOSS flag, which is set when
devloss tmo triggers and we've noticed that fabric node recovery has
already started or finished in between the time lpfc_dev_loss_tmo_callbk
queues lpfc_dev_loss_tmo_handler. If fabric node recovery succeeds, then
the driver reverses the devloss tmo marked kref put with a kref get. If
fabric node recovery fails, then the final kref put relies on the ELS
timing out or the REG_LOGIN cmpl routine.
Link: https://lore.kernel.org/r/[email protected]
Co-developed-by: Justin Tee <[email protected]>
Signed-off-by: Justin Tee <[email protected]>
Signed-off-by: James Smart <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/lpfc/lpfc_crtn.h | 2 +
drivers/scsi/lpfc/lpfc_disc.h | 12 +++-
drivers/scsi/lpfc/lpfc_els.c | 7 +-
drivers/scsi/lpfc/lpfc_hbadisc.c | 111 ++++++++++++++++++++++++++++++-
drivers/scsi/lpfc/lpfc_init.c | 12 ++--
drivers/scsi/lpfc/lpfc_scsi.c | 10 +--
6 files changed, 139 insertions(+), 15 deletions(-)
diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h
index c512f41991429..c9770b1d2366a 100644
--- a/drivers/scsi/lpfc/lpfc_crtn.h
+++ b/drivers/scsi/lpfc/lpfc_crtn.h
@@ -119,6 +119,8 @@ int lpfc_check_sli_ndlp(struct lpfc_hba *, struct lpfc_sli_ring *,
struct lpfc_nodelist *lpfc_nlp_init(struct lpfc_vport *vport, uint32_t did);
struct lpfc_nodelist *lpfc_nlp_get(struct lpfc_nodelist *);
int lpfc_nlp_put(struct lpfc_nodelist *);
+void lpfc_check_nlp_post_devloss(struct lpfc_vport *vport,
+ struct lpfc_nodelist *ndlp);
void lpfc_ignore_els_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
struct lpfc_iocbq *rspiocb);
int lpfc_nlp_not_used(struct lpfc_nodelist *ndlp);
diff --git a/drivers/scsi/lpfc/lpfc_disc.h b/drivers/scsi/lpfc/lpfc_disc.h
index 871b665bd72e3..37a4b79010bfc 100644
--- a/drivers/scsi/lpfc/lpfc_disc.h
+++ b/drivers/scsi/lpfc/lpfc_disc.h
@@ -85,6 +85,13 @@ enum lpfc_fc4_xpt_flags {
NLP_XPT_HAS_HH = 0x10
};
+enum lpfc_nlp_save_flags {
+ /* devloss occurred during recovery */
+ NLP_IN_RECOV_POST_DEV_LOSS = 0x1,
+ /* wait for outstanding LOGO to cmpl */
+ NLP_WAIT_FOR_LOGO = 0x2,
+};
+
struct lpfc_nodelist {
struct list_head nlp_listp;
struct serv_parm fc_sparam; /* buffer for service params */
@@ -144,8 +151,9 @@ struct lpfc_nodelist {
unsigned long *active_rrqs_xri_bitmap;
struct lpfc_scsicmd_bkt *lat_data; /* Latency data */
uint32_t fc4_prli_sent;
- u32 upcall_flags;
-#define NLP_WAIT_FOR_LOGO 0x2
+
+ /* flags to keep ndlp alive until special conditions are met */
+ enum lpfc_nlp_save_flags save_flags;
enum lpfc_fc4_xpt_flags fc4_xpt_flags;
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index 666b0a1b558ac..1a406df251cbf 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -2898,9 +2898,9 @@ lpfc_cmpl_els_logo(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
irsp = &(rspiocb->iocb);
spin_lock_irq(&ndlp->lock);
ndlp->nlp_flag &= ~NLP_LOGO_SND;
- if (ndlp->upcall_flags & NLP_WAIT_FOR_LOGO) {
+ if (ndlp->save_flags & NLP_WAIT_FOR_LOGO) {
wake_up_waiter = 1;
- ndlp->upcall_flags &= ~NLP_WAIT_FOR_LOGO;
+ ndlp->save_flags &= ~NLP_WAIT_FOR_LOGO;
}
spin_unlock_irq(&ndlp->lock);
@@ -10713,6 +10713,9 @@ lpfc_cmpl_els_fdisc(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
irsp->ulpStatus, irsp->un.ulpWord[4]);
goto fdisc_failed;
}
+
+ lpfc_check_nlp_post_devloss(vport, ndlp);
+
spin_lock_irq(shost->host_lock);
vport->fc_flag &= ~FC_VPORT_CVL_RCVD;
vport->fc_flag &= ~FC_VPORT_LOGO_RCVD;
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index e1c02229c82d9..9ccb904e35fcf 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -209,7 +209,12 @@ lpfc_dev_loss_tmo_callbk(struct fc_rport *rport)
spin_lock_irqsave(&ndlp->lock, iflags);
ndlp->nlp_flag |= NLP_IN_DEV_LOSS;
- ndlp->nlp_flag &= ~NLP_NPR_2B_DISC;
+
+ /* If there is a PLOGI in progress, and we are in a
+ * NLP_NPR_2B_DISC state, don't turn off the flag.
+ */
+ if (ndlp->nlp_state != NLP_STE_PLOGI_ISSUE)
+ ndlp->nlp_flag &= ~NLP_NPR_2B_DISC;
/*
* The backend does not expect any more calls associated with this
@@ -340,6 +345,37 @@ static void lpfc_check_inactive_vmid(struct lpfc_hba *phba)
lpfc_destroy_vport_work_array(phba, vports);
}
+/**
+ * lpfc_check_nlp_post_devloss - Check to restore ndlp refcnt after devloss
+ * @vport: Pointer to vport object.
+ * @ndlp: Pointer to remote node object.
+ *
+ * If NLP_IN_RECOV_POST_DEV_LOSS flag was set due to outstanding recovery of
+ * node during dev_loss_tmo processing, then this function restores the nlp_put
+ * kref decrement from lpfc_dev_loss_tmo_handler.
+ **/
+void
+lpfc_check_nlp_post_devloss(struct lpfc_vport *vport,
+ struct lpfc_nodelist *ndlp)
+{
+ unsigned long iflags;
+
+ spin_lock_irqsave(&ndlp->lock, iflags);
+ if (ndlp->save_flags & NLP_IN_RECOV_POST_DEV_LOSS) {
+ ndlp->save_flags &= ~NLP_IN_RECOV_POST_DEV_LOSS;
+ spin_unlock_irqrestore(&ndlp->lock, iflags);
+ lpfc_nlp_get(ndlp);
+ lpfc_printf_vlog(vport, KERN_INFO, LOG_DISCOVERY | LOG_NODE,
+ "8438 Devloss timeout reversed on DID x%x "
+ "refcnt %d ndlp %p flag x%x "
+ "port_state = x%x\n",
+ ndlp->nlp_DID, kref_read(&ndlp->kref), ndlp,
+ ndlp->nlp_flag, vport->port_state);
+ spin_lock_irqsave(&ndlp->lock, iflags);
+ }
+ spin_unlock_irqrestore(&ndlp->lock, iflags);
+}
+
/**
* lpfc_dev_loss_tmo_handler - Remote node devloss timeout handler
* @ndlp: Pointer to remote node object.
@@ -358,6 +394,8 @@ lpfc_dev_loss_tmo_handler(struct lpfc_nodelist *ndlp)
uint8_t *name;
int warn_on = 0;
int fcf_inuse = 0;
+ bool recovering = false;
+ struct fc_vport *fc_vport = NULL;
unsigned long iflags;
vport = ndlp->vport;
@@ -394,6 +432,64 @@ lpfc_dev_loss_tmo_handler(struct lpfc_nodelist *ndlp)
/* Fabric nodes are done. */
if (ndlp->nlp_type & NLP_FABRIC) {
+ spin_lock_irqsave(&ndlp->lock, iflags);
+ /* In massive vport configuration settings, it's possible
+ * dev_loss_tmo fired during node recovery. So, check if
+ * fabric nodes are in discovery states outstanding.
+ */
+ switch (ndlp->nlp_DID) {
+ case Fabric_DID:
+ fc_vport = vport->fc_vport;
+ if (fc_vport &&
+ fc_vport->vport_state == FC_VPORT_INITIALIZING)
+ recovering = true;
+ break;
+ case Fabric_Cntl_DID:
+ if (ndlp->nlp_flag & NLP_REG_LOGIN_SEND)
+ recovering = true;
+ break;
+ case FDMI_DID:
+ fallthrough;
+ case NameServer_DID:
+ if (ndlp->nlp_state >= NLP_STE_PLOGI_ISSUE &&
+ ndlp->nlp_state <= NLP_STE_REG_LOGIN_ISSUE)
+ recovering = true;
+ break;
+ }
+ spin_unlock_irqrestore(&ndlp->lock, iflags);
+
+ /* Mark an NLP_IN_RECOV_POST_DEV_LOSS flag to know if reversing
+ * the following lpfc_nlp_put is necessary after fabric node is
+ * recovered.
+ */
+ if (recovering) {
+ lpfc_printf_vlog(vport, KERN_INFO,
+ LOG_DISCOVERY | LOG_NODE,
+ "8436 Devloss timeout marked on "
+ "DID x%x refcnt %d ndlp %p "
+ "flag x%x port_state = x%x\n",
+ ndlp->nlp_DID, kref_read(&ndlp->kref),
+ ndlp, ndlp->nlp_flag,
+ vport->port_state);
+ spin_lock_irqsave(&ndlp->lock, iflags);
+ ndlp->save_flags |= NLP_IN_RECOV_POST_DEV_LOSS;
+ spin_unlock_irqrestore(&ndlp->lock, iflags);
+ } else if (ndlp->nlp_state == NLP_STE_UNMAPPED_NODE) {
+ /* Fabric node fully recovered before this dev_loss_tmo
+ * queue work is processed. Thus, ignore the
+ * dev_loss_tmo event.
+ */
+ lpfc_printf_vlog(vport, KERN_INFO,
+ LOG_DISCOVERY | LOG_NODE,
+ "8437 Devloss timeout ignored on "
+ "DID x%x refcnt %d ndlp %p "
+ "flag x%x port_state = x%x\n",
+ ndlp->nlp_DID, kref_read(&ndlp->kref),
+ ndlp, ndlp->nlp_flag,
+ vport->port_state);
+ return fcf_inuse;
+ }
+
lpfc_nlp_put(ndlp);
return fcf_inuse;
}
@@ -423,6 +519,14 @@ lpfc_dev_loss_tmo_handler(struct lpfc_nodelist *ndlp)
ndlp->nlp_state, ndlp->nlp_rpi);
}
+ /* If we are devloss, but we are in the process of rediscovering the
+ * ndlp, don't issue a NLP_EVT_DEVICE_RM event.
+ */
+ if (ndlp->nlp_state >= NLP_STE_PLOGI_ISSUE &&
+ ndlp->nlp_state <= NLP_STE_PRLI_ISSUE) {
+ return fcf_inuse;
+ }
+
if (!(ndlp->fc4_xpt_flags & NVME_XPT_REGD))
lpfc_disc_state_machine(vport, ndlp, NULL, NLP_EVT_DEVICE_RM);
@@ -4351,6 +4455,8 @@ lpfc_mbx_cmpl_fc_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
goto out;
}
+ lpfc_check_nlp_post_devloss(vport, ndlp);
+
if (phba->sli_rev < LPFC_SLI_REV4)
ndlp->nlp_rpi = mb->un.varWords[0];
@@ -4528,9 +4634,10 @@ lpfc_nlp_counters(struct lpfc_vport *vport, int state, int count)
void
lpfc_nlp_reg_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
{
-
unsigned long iflags;
+ lpfc_check_nlp_post_devloss(vport, ndlp);
+
spin_lock_irqsave(&ndlp->lock, iflags);
if (ndlp->fc4_xpt_flags & NLP_XPT_REGD) {
/* Already registered with backend, trigger rescan */
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 195169badb372..0fee8d590b0c4 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -3694,12 +3694,16 @@ lpfc_offline_prep(struct lpfc_hba *phba, int mbx_action)
lpfc_disc_state_machine(vports[i], ndlp,
NULL, NLP_EVT_DEVICE_RECOVERY);
- /* Don't remove the node unless the
+ /* Don't remove the node unless the node
* has been unregistered with the
- * transport. If so, let dev_loss
- * take care of the node.
+ * transport, and we're not in recovery
+ * before dev_loss_tmo triggered.
+ * Otherwise, let dev_loss take care of
+ * the node.
*/
- if (!(ndlp->fc4_xpt_flags &
+ if (!(ndlp->save_flags &
+ NLP_IN_RECOV_POST_DEV_LOSS) &&
+ !(ndlp->fc4_xpt_flags &
(NVME_XPT_REGD | SCSI_XPT_REGD)))
lpfc_disc_state_machine
(vports[i], ndlp,
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index 364c8a9b99095..3d9175f1b6787 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -6455,28 +6455,28 @@ lpfc_target_reset_handler(struct scsi_cmnd *cmnd)
/* Issue LOGO, if no LOGO is outstanding */
spin_lock_irqsave(&pnode->lock, flags);
- if (!(pnode->upcall_flags & NLP_WAIT_FOR_LOGO) &&
+ if (!(pnode->save_flags & NLP_WAIT_FOR_LOGO) &&
!pnode->logo_waitq) {
pnode->logo_waitq = &waitq;
pnode->nlp_fcp_info &= ~NLP_FCP_2_DEVICE;
pnode->nlp_flag |= NLP_ISSUE_LOGO;
- pnode->upcall_flags |= NLP_WAIT_FOR_LOGO;
+ pnode->save_flags |= NLP_WAIT_FOR_LOGO;
spin_unlock_irqrestore(&pnode->lock, flags);
lpfc_unreg_rpi(vport, pnode);
wait_event_timeout(waitq,
- (!(pnode->upcall_flags &
+ (!(pnode->save_flags &
NLP_WAIT_FOR_LOGO)),
msecs_to_jiffies(dev_loss_tmo *
1000));
- if (pnode->upcall_flags & NLP_WAIT_FOR_LOGO) {
+ if (pnode->save_flags & NLP_WAIT_FOR_LOGO) {
lpfc_printf_vlog(vport, KERN_ERR, logit,
"0725 SCSI layer TGTRST "
"failed & LOGO TMO (%d, %llu) "
"return x%x\n",
tgt_id, lun_id, status);
spin_lock_irqsave(&pnode->lock, flags);
- pnode->upcall_flags &= ~NLP_WAIT_FOR_LOGO;
+ pnode->save_flags &= ~NLP_WAIT_FOR_LOGO;
} else {
spin_lock_irqsave(&pnode->lock, flags);
}
--
2.33.0
From: William Overton <[email protected]>
[ Upstream commit 6d27788160362a7ee6c0d317636fe4b1ddbe59a7 ]
The kernel already has support for very similar Pioneer djm products
and this work is based on that.
Added device to quirks-table.h and added control info to
mixer_quirks.c.
Tested on my hardware and all working.
Signed-off-by: William Overton <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/usb/mixer_quirks.c | 34 +++++++++++++++++++++++
sound/usb/quirks-table.h | 58 ++++++++++++++++++++++++++++++++++++++++
2 files changed, 92 insertions(+)
diff --git a/sound/usb/mixer_quirks.c b/sound/usb/mixer_quirks.c
index 46082dc57be09..d489c1de3baec 100644
--- a/sound/usb/mixer_quirks.c
+++ b/sound/usb/mixer_quirks.c
@@ -2795,6 +2795,7 @@ static int snd_bbfpro_controls_create(struct usb_mixer_interface *mixer)
#define SND_DJM_750_IDX 0x1
#define SND_DJM_850_IDX 0x2
#define SND_DJM_900NXS2_IDX 0x3
+#define SND_DJM_750MK2_IDX 0x4
#define SND_DJM_CTL(_name, suffix, _default_value, _windex) { \
@@ -2984,10 +2985,40 @@ static const struct snd_djm_ctl snd_djm_ctls_900nxs2[] = {
SND_DJM_CTL("Ch5 Input", 900nxs2_cap5, 3, SND_DJM_WINDEX_CAP)
};
+// DJM-750MK2
+static const u16 snd_djm_opts_750mk2_cap1[] = {
+ 0x0100, 0x0102, 0x0103, 0x0106, 0x0107, 0x0108, 0x0109, 0x010a };
+static const u16 snd_djm_opts_750mk2_cap2[] = {
+ 0x0200, 0x0202, 0x0203, 0x0206, 0x0207, 0x0208, 0x0209, 0x020a };
+static const u16 snd_djm_opts_750mk2_cap3[] = {
+ 0x0300, 0x0302, 0x0303, 0x0306, 0x0307, 0x0308, 0x0309, 0x030a };
+static const u16 snd_djm_opts_750mk2_cap4[] = {
+ 0x0400, 0x0402, 0x0403, 0x0406, 0x0407, 0x0408, 0x0409, 0x040a };
+static const u16 snd_djm_opts_750mk2_cap5[] = {
+ 0x0507, 0x0508, 0x0509, 0x050a, 0x0511, 0x0512, 0x0513, 0x0514 };
+
+static const u16 snd_djm_opts_750mk2_pb1[] = { 0x0100, 0x0101, 0x0104 };
+static const u16 snd_djm_opts_750mk2_pb2[] = { 0x0200, 0x0201, 0x0204 };
+static const u16 snd_djm_opts_750mk2_pb3[] = { 0x0300, 0x0301, 0x0304 };
+
+
+static const struct snd_djm_ctl snd_djm_ctls_750mk2[] = {
+ SND_DJM_CTL("Capture Level", cap_level, 0, SND_DJM_WINDEX_CAPLVL),
+ SND_DJM_CTL("Ch1 Input", 750mk2_cap1, 2, SND_DJM_WINDEX_CAP),
+ SND_DJM_CTL("Ch2 Input", 750mk2_cap2, 2, SND_DJM_WINDEX_CAP),
+ SND_DJM_CTL("Ch3 Input", 750mk2_cap3, 2, SND_DJM_WINDEX_CAP),
+ SND_DJM_CTL("Ch4 Input", 750mk2_cap4, 2, SND_DJM_WINDEX_CAP),
+ SND_DJM_CTL("Ch5 Input", 750mk2_cap5, 3, SND_DJM_WINDEX_CAP),
+ SND_DJM_CTL("Ch1 Output", 750mk2_pb1, 0, SND_DJM_WINDEX_PB),
+ SND_DJM_CTL("Ch2 Output", 750mk2_pb2, 1, SND_DJM_WINDEX_PB),
+ SND_DJM_CTL("Ch3 Output", 750mk2_pb3, 2, SND_DJM_WINDEX_PB)
+};
+
static const struct snd_djm_device snd_djm_devices[] = {
SND_DJM_DEVICE(250mk2),
SND_DJM_DEVICE(750),
+ SND_DJM_DEVICE(750mk2),
SND_DJM_DEVICE(850),
SND_DJM_DEVICE(900nxs2)
};
@@ -3235,6 +3266,9 @@ int snd_usb_mixer_apply_create_quirk(struct usb_mixer_interface *mixer)
case USB_ID(0x08e4, 0x017f): /* Pioneer DJ DJM-750 */
err = snd_djm_controls_create(mixer, SND_DJM_750_IDX);
break;
+ case USB_ID(0x2b73, 0x001b): /* Pioneer DJ DJM-750MK2 */
+ err = snd_djm_controls_create(mixer, SND_DJM_750MK2_IDX);
+ break;
case USB_ID(0x08e4, 0x0163): /* Pioneer DJ DJM-850 */
err = snd_djm_controls_create(mixer, SND_DJM_850_IDX);
break;
diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h
index 2af8c68fac275..b1522e43173e1 100644
--- a/sound/usb/quirks-table.h
+++ b/sound/usb/quirks-table.h
@@ -3892,6 +3892,64 @@ YAMAHA_DEVICE(0x7010, "UB99"),
}
}
},
+{
+ /*
+ * Pioneer DJ DJM-750MK2
+ * 10 channels playback & 12 channels capture @ 48kHz S24LE
+ */
+ USB_DEVICE_VENDOR_SPEC(0x2b73, 0x001b),
+ .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) {
+ .ifnum = QUIRK_ANY_INTERFACE,
+ .type = QUIRK_COMPOSITE,
+ .data = (const struct snd_usb_audio_quirk[]) {
+ {
+ .ifnum = 0,
+ .type = QUIRK_AUDIO_FIXED_ENDPOINT,
+ .data = &(const struct audioformat) {
+ .formats = SNDRV_PCM_FMTBIT_S24_3LE,
+ .channels = 10,
+ .iface = 0,
+ .altsetting = 1,
+ .altset_idx = 1,
+ .endpoint = 0x01,
+ .ep_attr = USB_ENDPOINT_XFER_ISOC|
+ USB_ENDPOINT_SYNC_ASYNC,
+ .rates = SNDRV_PCM_RATE_48000,
+ .rate_min = 48000,
+ .rate_max = 48000,
+ .nr_rates = 1,
+ .rate_table = (unsigned int[]) {
+ 48000
+ }
+ }
+ },
+ {
+ .ifnum = 0,
+ .type = QUIRK_AUDIO_FIXED_ENDPOINT,
+ .data = &(const struct audioformat) {
+ .formats = SNDRV_PCM_FMTBIT_S24_3LE,
+ .channels = 12,
+ .iface = 0,
+ .altsetting = 1,
+ .altset_idx = 1,
+ .endpoint = 0x82,
+ .ep_idx = 1,
+ .ep_attr = USB_ENDPOINT_XFER_ISOC|
+ USB_ENDPOINT_SYNC_ASYNC|
+ USB_ENDPOINT_USAGE_IMPLICIT_FB,
+ .rates = SNDRV_PCM_RATE_48000,
+ .rate_min = 48000,
+ .rate_max = 48000,
+ .nr_rates = 1,
+ .rate_table = (unsigned int[]) { 48000 }
+ }
+ },
+ {
+ .ifnum = -1
+ }
+ }
+ }
+},
{
/*
* Pioneer DJ DJM-850
--
2.33.0
From: Anatolij Gustschin <[email protected]>
[ Upstream commit aed2886a5e9ffc8269a4220bff1e9e030d3d2eb1 ]
Fixes build warnings:
Warning (unit_address_vs_reg): /memory: node has a reg or ranges property, but no unit name
Signed-off-by: Anatolij Gustschin <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/boot/dts/charon.dts | 2 +-
arch/powerpc/boot/dts/digsy_mtc.dts | 2 +-
arch/powerpc/boot/dts/lite5200.dts | 2 +-
arch/powerpc/boot/dts/lite5200b.dts | 2 +-
arch/powerpc/boot/dts/media5200.dts | 2 +-
arch/powerpc/boot/dts/mpc5200b.dtsi | 2 +-
arch/powerpc/boot/dts/o2d.dts | 2 +-
arch/powerpc/boot/dts/o2d.dtsi | 2 +-
arch/powerpc/boot/dts/o2dnt2.dts | 2 +-
arch/powerpc/boot/dts/o3dnt.dts | 2 +-
arch/powerpc/boot/dts/pcm032.dts | 2 +-
arch/powerpc/boot/dts/tqm5200.dts | 2 +-
12 files changed, 12 insertions(+), 12 deletions(-)
diff --git a/arch/powerpc/boot/dts/charon.dts b/arch/powerpc/boot/dts/charon.dts
index 408b486b13dff..cd589539f313f 100644
--- a/arch/powerpc/boot/dts/charon.dts
+++ b/arch/powerpc/boot/dts/charon.dts
@@ -35,7 +35,7 @@
};
};
- memory {
+ memory@0 {
device_type = "memory";
reg = <0x00000000 0x08000000>; // 128MB
};
diff --git a/arch/powerpc/boot/dts/digsy_mtc.dts b/arch/powerpc/boot/dts/digsy_mtc.dts
index 0e5e9d3acf79f..19a14e62e65f4 100644
--- a/arch/powerpc/boot/dts/digsy_mtc.dts
+++ b/arch/powerpc/boot/dts/digsy_mtc.dts
@@ -16,7 +16,7 @@
model = "intercontrol,digsy-mtc";
compatible = "intercontrol,digsy-mtc";
- memory {
+ memory@0 {
reg = <0x00000000 0x02000000>; // 32MB
};
diff --git a/arch/powerpc/boot/dts/lite5200.dts b/arch/powerpc/boot/dts/lite5200.dts
index cb2782dd6132c..e7b194775d783 100644
--- a/arch/powerpc/boot/dts/lite5200.dts
+++ b/arch/powerpc/boot/dts/lite5200.dts
@@ -32,7 +32,7 @@
};
};
- memory {
+ memory@0 {
device_type = "memory";
reg = <0x00000000 0x04000000>; // 64MB
};
diff --git a/arch/powerpc/boot/dts/lite5200b.dts b/arch/powerpc/boot/dts/lite5200b.dts
index 2b86c81f90485..547cbe726ff23 100644
--- a/arch/powerpc/boot/dts/lite5200b.dts
+++ b/arch/powerpc/boot/dts/lite5200b.dts
@@ -31,7 +31,7 @@
led4 { gpios = <&gpio_simple 2 1>; };
};
- memory {
+ memory@0 {
reg = <0x00000000 0x10000000>; // 256MB
};
diff --git a/arch/powerpc/boot/dts/media5200.dts b/arch/powerpc/boot/dts/media5200.dts
index 61cae9dcddef4..f3188018faceb 100644
--- a/arch/powerpc/boot/dts/media5200.dts
+++ b/arch/powerpc/boot/dts/media5200.dts
@@ -32,7 +32,7 @@
};
};
- memory {
+ memory@0 {
reg = <0x00000000 0x08000000>; // 128MB RAM
};
diff --git a/arch/powerpc/boot/dts/mpc5200b.dtsi b/arch/powerpc/boot/dts/mpc5200b.dtsi
index 648fe31795f49..8b796f3b11da7 100644
--- a/arch/powerpc/boot/dts/mpc5200b.dtsi
+++ b/arch/powerpc/boot/dts/mpc5200b.dtsi
@@ -33,7 +33,7 @@
};
};
- memory: memory {
+ memory: memory@0 {
device_type = "memory";
reg = <0x00000000 0x04000000>; // 64MB
};
diff --git a/arch/powerpc/boot/dts/o2d.dts b/arch/powerpc/boot/dts/o2d.dts
index 24a46f65e5299..e0a8d3034417f 100644
--- a/arch/powerpc/boot/dts/o2d.dts
+++ b/arch/powerpc/boot/dts/o2d.dts
@@ -12,7 +12,7 @@
model = "ifm,o2d";
compatible = "ifm,o2d";
- memory {
+ memory@0 {
reg = <0x00000000 0x08000000>; // 128MB
};
diff --git a/arch/powerpc/boot/dts/o2d.dtsi b/arch/powerpc/boot/dts/o2d.dtsi
index 6661955a2be47..b55a9e5bd828c 100644
--- a/arch/powerpc/boot/dts/o2d.dtsi
+++ b/arch/powerpc/boot/dts/o2d.dtsi
@@ -19,7 +19,7 @@
model = "ifm,o2d";
compatible = "ifm,o2d";
- memory {
+ memory@0 {
reg = <0x00000000 0x04000000>; // 64MB
};
diff --git a/arch/powerpc/boot/dts/o2dnt2.dts b/arch/powerpc/boot/dts/o2dnt2.dts
index eeba7f5507d5d..c2eedbd1f5fcb 100644
--- a/arch/powerpc/boot/dts/o2dnt2.dts
+++ b/arch/powerpc/boot/dts/o2dnt2.dts
@@ -12,7 +12,7 @@
model = "ifm,o2dnt2";
compatible = "ifm,o2d";
- memory {
+ memory@0 {
reg = <0x00000000 0x08000000>; // 128MB
};
diff --git a/arch/powerpc/boot/dts/o3dnt.dts b/arch/powerpc/boot/dts/o3dnt.dts
index fd00396b0593e..e4c1bdd412716 100644
--- a/arch/powerpc/boot/dts/o3dnt.dts
+++ b/arch/powerpc/boot/dts/o3dnt.dts
@@ -12,7 +12,7 @@
model = "ifm,o3dnt";
compatible = "ifm,o2d";
- memory {
+ memory@0 {
reg = <0x00000000 0x04000000>; // 64MB
};
diff --git a/arch/powerpc/boot/dts/pcm032.dts b/arch/powerpc/boot/dts/pcm032.dts
index 780e13d99e7b8..1895bc95900cc 100644
--- a/arch/powerpc/boot/dts/pcm032.dts
+++ b/arch/powerpc/boot/dts/pcm032.dts
@@ -20,7 +20,7 @@
model = "phytec,pcm032";
compatible = "phytec,pcm032";
- memory {
+ memory@0 {
reg = <0x00000000 0x08000000>; // 128MB
};
diff --git a/arch/powerpc/boot/dts/tqm5200.dts b/arch/powerpc/boot/dts/tqm5200.dts
index 9ed0bc78967e1..5bb25a9e40a01 100644
--- a/arch/powerpc/boot/dts/tqm5200.dts
+++ b/arch/powerpc/boot/dts/tqm5200.dts
@@ -32,7 +32,7 @@
};
};
- memory {
+ memory@0 {
device_type = "memory";
reg = <0x00000000 0x04000000>; // 64MB
};
--
2.33.0
From: wangyugui <[email protected]>
[ Upstream commit 911a81c9c7092bfd75432ce79b2ef879127ea065 ]
The 'struct attribute' flex array contains some struct lock_class_key's
which become big when lockdep is turned on. Big enough that some drivers
will not load when CONFIG_PROVE_LOCKING=y because they cannot allocate
enough memory:
WARNING: CPU: 36 PID: 8 at mm/page_alloc.c:5350 __alloc_pages+0x27e/0x3e0
Call Trace:
kmalloc_order+0x2a/0xb0
kmalloc_order_trace+0x19/0xf0
__kmalloc+0x231/0x270
ib_setup_port_attrs+0xd8/0x870 [ib_core]
ib_register_device+0x419/0x4e0 [ib_core]
bnxt_re_task+0x208/0x2d0 [bnxt_re]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: wangyugui <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/core/sysfs.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/infiniband/core/sysfs.c b/drivers/infiniband/core/sysfs.c
index 6146c3c1cbe5c..8d709986b88c7 100644
--- a/drivers/infiniband/core/sysfs.c
+++ b/drivers/infiniband/core/sysfs.c
@@ -757,7 +757,7 @@ static void ib_port_release(struct kobject *kobj)
if (port->hw_stats_data)
kfree(port->hw_stats_data->stats);
kfree(port->hw_stats_data);
- kfree(port);
+ kvfree(port);
}
static void ib_port_gid_attr_release(struct kobject *kobj)
@@ -1189,7 +1189,7 @@ static struct ib_port *setup_port(struct ib_core_device *coredev, int port_num,
struct ib_port *p;
int ret;
- p = kzalloc(struct_size(p, attrs_list,
+ p = kvzalloc(struct_size(p, attrs_list,
attr->gid_tbl_len + attr->pkey_tbl_len),
GFP_KERNEL);
if (!p)
--
2.33.0
From: Stephan Gerhold <[email protected]>
[ Upstream commit 179811bebc7b91e0f9d0adee9bfa3d2af9c43869 ]
According to the new DT schema for qcom,rpm-msg-ram the node name
should be sram@. memory@ is reserved for definition of physical RAM
(usable by Linux).
This fixes the following dtbs_check error on various device trees:
memory@60000: 'device_type' is a required property
From schema: dtschema/schemas/memory.yaml
Signed-off-by: Stephan Gerhold <[email protected]>
Signed-off-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/qcom/msm8916.dtsi | 2 +-
arch/arm64/boot/dts/qcom/msm8994.dtsi | 2 +-
arch/arm64/boot/dts/qcom/msm8996.dtsi | 2 +-
arch/arm64/boot/dts/qcom/msm8998.dtsi | 2 +-
arch/arm64/boot/dts/qcom/qcs404.dtsi | 2 +-
arch/arm64/boot/dts/qcom/sdm630.dtsi | 2 +-
arch/arm64/boot/dts/qcom/sm6125.dtsi | 2 +-
7 files changed, 7 insertions(+), 7 deletions(-)
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -445,7 +445,7 @@
};
};
- rpm_msg_ram: memory@60000 {
+ rpm_msg_ram: sram@60000 {
compatible = "qcom,rpm-msg-ram";
reg = <0x00060000 0x8000>;
};
--- a/arch/arm64/boot/dts/qcom/msm8994.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi
@@ -715,7 +715,7 @@
reg = <0xfc400000 0x2000>;
};
- rpm_msg_ram: memory@fc428000 {
+ rpm_msg_ram: sram@fc428000 {
compatible = "qcom,rpm-msg-ram";
reg = <0xfc428000 0x4000>;
};
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -638,7 +638,7 @@
};
};
- rpm_msg_ram: memory@68000 {
+ rpm_msg_ram: sram@68000 {
compatible = "qcom,rpm-msg-ram";
reg = <0x00068000 0x6000>;
};
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -861,7 +861,7 @@
reg = <0x00100000 0xb0000>;
};
- rpm_msg_ram: memory@778000 {
+ rpm_msg_ram: sram@778000 {
compatible = "qcom,rpm-msg-ram";
reg = <0x00778000 0x7000>;
};
--- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
@@ -318,7 +318,7 @@
status = "disabled";
};
- rpm_msg_ram: memory@60000 {
+ rpm_msg_ram: sram@60000 {
compatible = "qcom,rpm-msg-ram";
reg = <0x00060000 0x6000>;
};
--- a/arch/arm64/boot/dts/qcom/sdm630.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi
@@ -541,7 +541,7 @@
<&sleep_clk>;
};
- rpm_msg_ram: memory@778000 {
+ rpm_msg_ram: sram@778000 {
compatible = "qcom,rpm-msg-ram";
reg = <0x00778000 0x7000>;
};
--- a/arch/arm64/boot/dts/qcom/sm6125.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi
@@ -380,7 +380,7 @@
status = "disabled";
};
- rpm_msg_ram: memory@45f0000 {
+ rpm_msg_ram: sram@45f0000 {
compatible = "qcom,rpm-msg-ram";
reg = <0x045f0000 0x7000>;
};
From: Chengfeng Ye <[email protected]>
[ Upstream commit a0d21bb3279476c777434c40d969ea88ca64f9aa ]
The pointer block return from snd_gf1_dma_next_block could be
null, so there is a potential null pointer dereference issue.
Fix this by adding a null check before dereference.
Signed-off-by: Chengfeng Ye <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/isa/gus/gus_dma.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/sound/isa/gus/gus_dma.c b/sound/isa/gus/gus_dma.c
index a1c770d826dda..6d664dd8dde0b 100644
--- a/sound/isa/gus/gus_dma.c
+++ b/sound/isa/gus/gus_dma.c
@@ -126,6 +126,8 @@ static void snd_gf1_dma_interrupt(struct snd_gus_card * gus)
}
block = snd_gf1_dma_next_block(gus);
spin_unlock(&gus->dma_lock);
+ if (!block)
+ return;
snd_gf1_dma_program(gus, block->addr, block->buf_addr, block->count, (unsigned short) block->cmd);
kfree(block);
#if 0
--
2.33.0
From: Claudiu Beznea <[email protected]>
[ Upstream commit facb87ad75603813bc3b1314f5a87377f020fcb8 ]
On SAMA7G5 the prescaler part of master clock has been implemented as a
changeable one. Everytime the prescaler is changed the PMC_SR.MCKRDY bit
must be polled. Value 1 for PMC_SR.MCKRDY means the prescaler update is
done. Driver polls for this bit until it becomes 1. On SAMA7G5 it has
been discovered that in some conditions the PMC_SR.MCKRDY is not rising
but the rate it provides it's stable. The workaround is to add a timeout
when polling for PMC_SR.MCKRDY. At the moment, for SAMA7G5, the prescaler
will be removed from Linux clock tree as all the frequencies for CPU could
be obtained from PLL and also there will be less overhead when changing
frequency via DVFS.
Signed-off-by: Claudiu Beznea <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Acked-by: Nicolas Ferre <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/at91/sama7g5.c | 11 +----------
1 file changed, 1 insertion(+), 10 deletions(-)
diff --git a/drivers/clk/at91/sama7g5.c b/drivers/clk/at91/sama7g5.c
index cf8c079aa086a..019e712f90d6f 100644
--- a/drivers/clk/at91/sama7g5.c
+++ b/drivers/clk/at91/sama7g5.c
@@ -982,16 +982,7 @@ static void __init sama7g5_pmc_setup(struct device_node *np)
}
parent_names[0] = "cpupll_divpmcck";
- hw = at91_clk_register_master_pres(regmap, "cpuck", 1, parent_names,
- &mck0_layout, &mck0_characteristics,
- &pmc_mck0_lock,
- CLK_SET_RATE_PARENT, 0);
- if (IS_ERR(hw))
- goto err_free;
-
- sama7g5_pmc->chws[PMC_CPU] = hw;
-
- hw = at91_clk_register_master_div(regmap, "mck0", "cpuck",
+ hw = at91_clk_register_master_div(regmap, "mck0", "cpupll_divpmcck",
&mck0_layout, &mck0_characteristics,
&pmc_mck0_lock, 0);
if (IS_ERR(hw))
--
2.33.0
From: Chengfeng Ye <[email protected]>
[ Upstream commit b97053df0f04747c3c1e021ecbe99db675342954 ]
The pointer cs_desc return from snd_usb_find_clock_source could
be null, so there is a potential null pointer dereference issue.
Fix this by adding a null check before dereference.
Signed-off-by: Chengfeng Ye <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/usb/clock.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/sound/usb/clock.c b/sound/usb/clock.c
index 81d5ce07d548b..98345a695dccb 100644
--- a/sound/usb/clock.c
+++ b/sound/usb/clock.c
@@ -496,6 +496,10 @@ int snd_usb_set_sample_rate_v2v3(struct snd_usb_audio *chip,
union uac23_clock_source_desc *cs_desc;
cs_desc = snd_usb_find_clock_source(chip, clock, fmt->protocol);
+
+ if (!cs_desc)
+ return 0;
+
if (fmt->protocol == UAC_VERSION_3)
bmControls = le32_to_cpu(cs_desc->v3.bmControls);
else
--
2.33.0
From: Sven Peter <[email protected]>
[ Upstream commit 5a009fc1364170b240a4d351b345e69bb3728b3e ]
DART has an additional global register to control which streams are
isolated. This register is a bit redundant since DART_TCR can already
be used to control isolation and is usually initialized to DART_STREAM_ALL
by the time we get control. Some DARTs (namely the one used for the audio
controller) however have some streams disabled initially. Make sure those
work by initializing DART_STREAMS_ENABLE during reset.
Reported-by: Martin Povišer <[email protected]>
Signed-off-by: Sven Peter <[email protected]>
Reviewed-by: Hector Martin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joerg Roedel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/iommu/apple-dart.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/iommu/apple-dart.c b/drivers/iommu/apple-dart.c
index fdfa39ec2a4d4..ad69eeb5ac5ba 100644
--- a/drivers/iommu/apple-dart.c
+++ b/drivers/iommu/apple-dart.c
@@ -70,6 +70,8 @@
#define DART_ERROR_ADDR_HI 0x54
#define DART_ERROR_ADDR_LO 0x50
+#define DART_STREAMS_ENABLE 0xfc
+
#define DART_TCR(sid) (0x100 + 4 * (sid))
#define DART_TCR_TRANSLATE_ENABLE BIT(7)
#define DART_TCR_BYPASS0_ENABLE BIT(8)
@@ -301,6 +303,9 @@ static int apple_dart_hw_reset(struct apple_dart *dart)
apple_dart_hw_disable_dma(&stream_map);
apple_dart_hw_clear_all_ttbrs(&stream_map);
+ /* enable all streams globally since TCR is used to control isolation */
+ writel(DART_STREAM_ALL, dart->regs + DART_STREAMS_ENABLE);
+
/* clear any pending errors before the interrupt is unmasked */
writel(readl(dart->regs + DART_ERROR), dart->regs + DART_ERROR);
--
2.33.0
From: Michael Ellerman <[email protected]>
[ Upstream commit fef071be57dc43679a32d5b0e6ee176d6f12e9f2 ]
In dcr-low.S we use cmpli with three arguments, instead of four
arguments as defined in the ISA:
cmpli cr0,r3,1024
This appears to be a PPC440-ism, looking at the "PPC440x5 CPU Core
User’s Manual" it shows cmpli having no L field, but implied to be 0 due
to the core being 32-bit. It mentions that the ISA defines four
arguments and recommends using cmplwi.
It also corresponds to the old POWER instruction set, which had no L
field there, a reserved bit instead.
dcr-low.S is only built 32-bit, because it is only built when
DCR_NATIVE=y, which is only selected by 40x and 44x. Looking at the
generated code (with gcc/gas) we see cmplwi as expected.
Although gas is happy with the 3-argument version when building for
32-bit, the LLVM assembler is not and errors out with:
arch/powerpc/sysdev/dcr-low.S:27:10: error: invalid operand for instruction
cmpli 0,%r3,1024; ...
^
Switch to the cmplwi extended opcode, which avoids any confusion when
reading the ISA, fixes the issue with the LLVM assembler, and also means
the code could be built 64-bit in future (though that's very unlikely).
Reported-by: Nick Desaulniers <[email protected]>
Reviewed-by: Nick Desaulniers <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
BugLink: https://github.com/ClangBuiltLinux/linux/issues/1419
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/sysdev/dcr-low.S | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/powerpc/sysdev/dcr-low.S b/arch/powerpc/sysdev/dcr-low.S
index efeeb1b885a17..329b9c4ae5429 100644
--- a/arch/powerpc/sysdev/dcr-low.S
+++ b/arch/powerpc/sysdev/dcr-low.S
@@ -11,7 +11,7 @@
#include <asm/export.h>
#define DCR_ACCESS_PROLOG(table) \
- cmpli cr0,r3,1024; \
+ cmplwi cr0,r3,1024; \
rlwinm r3,r3,4,18,27; \
lis r5,table@h; \
ori r5,r5,table@l; \
--
2.33.0
From: Christophe Leroy <[email protected]>
[ Upstream commit c12ab8dbc492b992e1ea717db933cee568780c47 ]
Until now, all tests involving CONFIG_STRICT_KERNEL_RWX were done with
DEBUG_RODATA_TEST to check the result. But now that
CONFIG_STRICT_KERNEL_RWX is selected by default, it came without
CONFIG_DEBUG_RODATA_TEST and led to the following Oops
[ 6.830908] Freeing unused kernel image (initmem) memory: 352K
[ 6.840077] BUG: Unable to handle kernel data access on write at 0xc1285200
[ 6.846836] Faulting instruction address: 0xc0004b6c
[ 6.851745] Oops: Kernel access of bad area, sig: 11 [#1]
[ 6.857075] BE PAGE_SIZE=16K PREEMPT CMPC885
[ 6.861348] SAF3000 DIE NOTIFICATION
[ 6.864830] CPU: 0 PID: 1 Comm: swapper Not tainted 5.15.0-rc5-s3k-dev-02255-g2747d7b7916f #451
[ 6.873429] NIP: c0004b6c LR: c0004b60 CTR: 00000000
[ 6.878419] REGS: c902be60 TRAP: 0300 Not tainted (5.15.0-rc5-s3k-dev-02255-g2747d7b7916f)
[ 6.886852] MSR: 00009032 <EE,ME,IR,DR,RI> CR: 53000335 XER: 8000ff40
[ 6.893564] DAR: c1285200 DSISR: 82000000
[ 6.893564] GPR00: 0c000000 c902bf20 c20f4000 08000000 00000001 04001f00 c1800000 00000035
[ 6.893564] GPR08: ff0001ff c1280000 00000002 c0004b60 00001000 00000000 c0004b1c 00000000
[ 6.893564] GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 6.893564] GPR24: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 c1060000
[ 6.932034] NIP [c0004b6c] kernel_init+0x50/0x138
[ 6.936682] LR [c0004b60] kernel_init+0x44/0x138
[ 6.941245] Call Trace:
[ 6.943653] [c902bf20] [c0004b60] kernel_init+0x44/0x138 (unreliable)
[ 6.950022] [c902bf30] [c001122c] ret_from_kernel_thread+0x5c/0x64
[ 6.956135] Instruction dump:
[ 6.959060] 48ffc521 48045469 4800d8cd 3d20c086 89295fa0 2c090000 41820058 480796c9
[ 6.966890] 4800e48d 3d20c128 39400002 3fe0c106 <91495200> 3bff8000 4806fa1d 481f7d75
[ 6.974902] ---[ end trace 1e397bacba4aa610 ]---
0xc1285200 corresponds to 'system_state' global var that the kernel is trying to set to
SYSTEM_RUNNING. This var is above the RO/RW limit so it shouldn't Oops.
It oopses because the dirty bit is missing.
Signed-off-by: Christophe Leroy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/3d5800b0bbcd7b19761b98f50421358667b45331.1635520232.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/kernel/head_8xx.S | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S
index 9bdb95f5694f7..2d596881b70e7 100644
--- a/arch/powerpc/kernel/head_8xx.S
+++ b/arch/powerpc/kernel/head_8xx.S
@@ -755,7 +755,7 @@ _GLOBAL(mmu_pin_tlb)
cmplw r6, r9
bdnzt lt, 2b
-4: LOAD_REG_IMMEDIATE(r8, 0xf0 | _PAGE_SPS | _PAGE_SH | _PAGE_PRESENT)
+4: LOAD_REG_IMMEDIATE(r8, 0xf0 | _PAGE_DIRTY | _PAGE_SPS | _PAGE_SH | _PAGE_PRESENT)
2: ori r0, r6, MD_EVALID
mtspr SPRN_MD_CTR, r5
mtspr SPRN_MD_EPN, r0
--
2.33.0
From: Roger Quadros <[email protected]>
[ Upstream commit 51b9e22ffd3c4c56cbb7caae9750f70e55ffa603 ]
gpmc,mux-add-data is not boolean.
Fixes the below errors flagged by dtbs_check.
"ethernet@4,0:gpmc,mux-add-data: True is not of type 'array'"
Signed-off-by: Roger Quadros <[email protected]>
Signed-off-by: Tony Lindgren <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi | 2 +-
arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi b/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi
index 7f6aefd134514..e7534fe9c53cf 100644
--- a/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi
+++ b/arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi
@@ -29,7 +29,7 @@
compatible = "smsc,lan9221","smsc,lan9115";
bank-width = <2>;
- gpmc,mux-add-data;
+ gpmc,mux-add-data = <0>;
gpmc,cs-on-ns = <0>;
gpmc,cs-rd-off-ns = <42>;
gpmc,cs-wr-off-ns = <36>;
diff --git a/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi b/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi
index e5da3bc6f1050..218a10c0d8159 100644
--- a/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi
+++ b/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi
@@ -22,7 +22,7 @@
compatible = "smsc,lan9221","smsc,lan9115";
bank-width = <2>;
- gpmc,mux-add-data;
+ gpmc,mux-add-data = <0>;
gpmc,cs-on-ns = <0>;
gpmc,cs-rd-off-ns = <42>;
gpmc,cs-wr-off-ns = <36>;
--
2.33.0
From: Nick Desaulniers <[email protected]>
[ Upstream commit 0e38225c92c7964482a8bb6b3e37fde4319e965c ]
request_irq is marked __must_check, but the call in shx3_prepare_cpus
has a void return type, so it can't propagate failure to the caller.
Follow cues from hexagon and just print an error.
Fixes: c7936b9abcf5 ("sh: smp: Hook in to the generic IPI handler for SH-X3 SMP.")
Cc: Miguel Ojeda <[email protected]>
Cc: Paul Mundt <[email protected]>
Reported-by: Guenter Roeck <[email protected]>
Signed-off-by: Nick Desaulniers <[email protected]>
Tested-by: John Paul Adrian Glaubitz <[email protected]>
Reviewed-by: Miguel Ojeda <[email protected]>
Signed-off-by: Rich Felker <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/sh/kernel/cpu/sh4a/smp-shx3.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/arch/sh/kernel/cpu/sh4a/smp-shx3.c b/arch/sh/kernel/cpu/sh4a/smp-shx3.c
index f8a2bec0f260b..1261dc7b84e8b 100644
--- a/arch/sh/kernel/cpu/sh4a/smp-shx3.c
+++ b/arch/sh/kernel/cpu/sh4a/smp-shx3.c
@@ -73,8 +73,9 @@ static void shx3_prepare_cpus(unsigned int max_cpus)
BUILD_BUG_ON(SMP_MSG_NR >= 8);
for (i = 0; i < SMP_MSG_NR; i++)
- request_irq(104 + i, ipi_interrupt_handler,
- IRQF_PERCPU, "IPI", (void *)(long)i);
+ if (request_irq(104 + i, ipi_interrupt_handler,
+ IRQF_PERCPU, "IPI", (void *)(long)i))
+ pr_err("Failed to request irq %d\n", i);
for (i = 0; i < max_cpus; i++)
set_cpu_present(i, true);
--
2.33.0
From: Lu Wei <[email protected]>
[ Upstream commit bde82ee391fa6d3ad054313c4aa7b726d32515ce ]
If KMEM_CACHE or maple_alloc_dev failed, the maple_bus_init() will return 0
rather than error, because the retval is not changed after KMEM_CACHE or
maple_alloc_dev failed.
Fixes: 17be2d2b1c33 ("sh: Add maple bus support for the SEGA Dreamcast.")
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Lu Wei <[email protected]>
Acked-by: John Paul Adrian Glaubitz <[email protected]>
Signed-off-by: Rich Felker <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/sh/maple/maple.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/sh/maple/maple.c b/drivers/sh/maple/maple.c
index bd0fbcdbdefe9..e24e220e56eea 100644
--- a/drivers/sh/maple/maple.c
+++ b/drivers/sh/maple/maple.c
@@ -834,8 +834,10 @@ static int __init maple_bus_init(void)
maple_queue_cache = KMEM_CACHE(maple_buffer, SLAB_HWCACHE_ALIGN);
- if (!maple_queue_cache)
+ if (!maple_queue_cache) {
+ retval = -ENOMEM;
goto cleanup_bothirqs;
+ }
INIT_LIST_HEAD(&maple_waitq);
INIT_LIST_HEAD(&maple_sentq);
@@ -848,6 +850,7 @@ static int __init maple_bus_init(void)
if (!mdev[i]) {
while (i-- > 0)
maple_free_dev(mdev[i]);
+ retval = -ENOMEM;
goto cleanup_cache;
}
baseunits[i] = mdev[i];
--
2.33.0
From: Gao Xiang <[email protected]>
[ Upstream commit 70a9ac36ffd807ac506ed0b849f3e8ce3c6623f2 ]
Fix up a misuse that the filename pointer isn't always valid in
the ring buffer, and we should copy the content instead.
Fixes: 0c5e36db17f5 ("f2fs: trace f2fs_lookup")
Signed-off-by: Gao Xiang <[email protected]>
Signed-off-by: Jaegeuk Kim <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/trace/events/f2fs.h | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/include/trace/events/f2fs.h b/include/trace/events/f2fs.h
index 4e881d91c8744..4cb055af1ec0b 100644
--- a/include/trace/events/f2fs.h
+++ b/include/trace/events/f2fs.h
@@ -807,20 +807,20 @@ TRACE_EVENT(f2fs_lookup_start,
TP_STRUCT__entry(
__field(dev_t, dev)
__field(ino_t, ino)
- __field(const char *, name)
+ __string(name, dentry->d_name.name)
__field(unsigned int, flags)
),
TP_fast_assign(
__entry->dev = dir->i_sb->s_dev;
__entry->ino = dir->i_ino;
- __entry->name = dentry->d_name.name;
+ __assign_str(name, dentry->d_name.name);
__entry->flags = flags;
),
TP_printk("dev = (%d,%d), pino = %lu, name:%s, flags:%u",
show_dev_ino(__entry),
- __entry->name,
+ __get_str(name),
__entry->flags)
);
@@ -834,7 +834,7 @@ TRACE_EVENT(f2fs_lookup_end,
TP_STRUCT__entry(
__field(dev_t, dev)
__field(ino_t, ino)
- __field(const char *, name)
+ __string(name, dentry->d_name.name)
__field(nid_t, cino)
__field(int, err)
),
@@ -842,14 +842,14 @@ TRACE_EVENT(f2fs_lookup_end,
TP_fast_assign(
__entry->dev = dir->i_sb->s_dev;
__entry->ino = dir->i_ino;
- __entry->name = dentry->d_name.name;
+ __assign_str(name, dentry->d_name.name);
__entry->cino = ino;
__entry->err = err;
),
TP_printk("dev = (%d,%d), pino = %lu, name:%s, ino:%u, err:%d",
show_dev_ino(__entry),
- __entry->name,
+ __get_str(name),
__entry->cino,
__entry->err)
);
--
2.33.0
From: Keoseong Park <[email protected]>
[ Upstream commit 011e0868e0cf1237675b22e36fffa958fb08f46e ]
Since active_logs can be set to 2 or 4 or NR_CURSEG_PERSIST_TYPE(6),
it cannot be set to NR_CURSEG_TYPE(8).
That is, whint_mode is always off.
Therefore, the condition is changed from NR_CURSEG_TYPE to NR_CURSEG_PERSIST_TYPE.
Cc: Chao Yu <[email protected]>
Fixes: d0b9e42ab615 (f2fs: introduce inmem curseg)
Reported-by: tanghuan <[email protected]>
Signed-off-by: Keoseong Park <[email protected]>
Signed-off-by: Fengnan Chang <[email protected]>
Reviewed-by: Chao Yu <[email protected]>
Signed-off-by: Jaegeuk Kim <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/f2fs/super.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/f2fs/super.c b/fs/f2fs/super.c
index dbe040b66802c..4d24146b4f471 100644
--- a/fs/f2fs/super.c
+++ b/fs/f2fs/super.c
@@ -1292,7 +1292,7 @@ default_check:
/* Not pass down write hints if the number of active logs is lesser
* than NR_CURSEG_PERSIST_TYPE.
*/
- if (F2FS_OPTION(sbi).active_logs != NR_CURSEG_TYPE)
+ if (F2FS_OPTION(sbi).active_logs != NR_CURSEG_PERSIST_TYPE)
F2FS_OPTION(sbi).whint_mode = WHINT_MODE_OFF;
if (f2fs_sb_has_readonly(sbi) && !f2fs_readonly(sbi->sb)) {
--
2.33.0
From: Li Yang <[email protected]>
[ Upstream commit 05e63b48b20fa70726be505a7660d1a07bc1cffb ]
We cannot list all the possible chips used in different board revisions,
just use the generic "jedec,spi-nor" compatible instead. This also
fixes dtbs_check error:
['jedec,spi-nor', 's25fl256s1', 's25fl512s'] is too long
Signed-off-by: Li Yang <[email protected]>
Reviewed-by: Kuldeep Singh <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/ls1021a-tsn.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/ls1021a-tsn.dts b/arch/arm/boot/dts/ls1021a-tsn.dts
index 9d8f0c2a8aba3..aca78b5eddf20 100644
--- a/arch/arm/boot/dts/ls1021a-tsn.dts
+++ b/arch/arm/boot/dts/ls1021a-tsn.dts
@@ -251,7 +251,7 @@
flash@0 {
/* Rev. A uses 64MB flash, Rev. B & C use 32MB flash */
- compatible = "jedec,spi-nor", "s25fl256s1", "s25fl512s";
+ compatible = "jedec,spi-nor";
spi-max-frequency = <20000000>;
#address-cells = <1>;
#size-cells = <1>;
--
2.33.0
From: Randy Dunlap <[email protected]>
[ Upstream commit 3c05f1477e62ea5a0a8797ba6a545b1dc751fb31 ]
On m68k, compiling drivers under SND_ISA causes build errors:
../sound/core/isadma.c: In function 'snd_dma_program':
../sound/core/isadma.c:33:17: error: implicit declaration of function 'claim_dma_lock' [-Werror=implicit-function-declaration]
33 | flags = claim_dma_lock();
| ^~~~~~~~~~~~~~
../sound/core/isadma.c:41:9: error: implicit declaration of function 'release_dma_lock' [-Werror=implicit-function-declaration]
41 | release_dma_lock(flags);
| ^~~~~~~~~~~~~~~~
../sound/isa/sb/sb16_main.c: In function 'snd_sb16_playback_prepare':
../sound/isa/sb/sb16_main.c:253:72: error: 'DMA_AUTOINIT' undeclared (first use in this function)
253 | snd_dma_program(dma, runtime->dma_addr, size, DMA_MODE_WRITE | DMA_AUTOINIT);
| ^~~~~~~~~~~~
../sound/isa/sb/sb16_main.c:253:72: note: each undeclared identifier is reported only once for each function it appears in
../sound/isa/sb/sb16_main.c: In function 'snd_sb16_capture_prepare':
../sound/isa/sb/sb16_main.c:322:71: error: 'DMA_AUTOINIT' undeclared (first use in this function)
322 | snd_dma_program(dma, runtime->dma_addr, size, DMA_MODE_READ | DMA_AUTOINIT);
| ^~~~~~~~~~~~
and more...
Signed-off-by: Randy Dunlap <[email protected]>
Cc: Jaroslav Kysela <[email protected]>
Cc: Takashi Iwai <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: Geert Uytterhoeven <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/core/Makefile | 2 ++
sound/isa/Kconfig | 2 +-
sound/pci/Kconfig | 1 +
3 files changed, 4 insertions(+), 1 deletion(-)
diff --git a/sound/core/Makefile b/sound/core/Makefile
index d774792850f31..79e1407cd0de7 100644
--- a/sound/core/Makefile
+++ b/sound/core/Makefile
@@ -9,7 +9,9 @@ ifneq ($(CONFIG_SND_PROC_FS),)
snd-y += info.o
snd-$(CONFIG_SND_OSSEMUL) += info_oss.o
endif
+ifneq ($(CONFIG_M68K),y)
snd-$(CONFIG_ISA_DMA_API) += isadma.o
+endif
snd-$(CONFIG_SND_OSSEMUL) += sound_oss.o
snd-$(CONFIG_SND_VMASTER) += vmaster.o
snd-$(CONFIG_SND_JACK) += ctljack.o jack.o
diff --git a/sound/isa/Kconfig b/sound/isa/Kconfig
index 6ffa48dd59830..570b88e0b2018 100644
--- a/sound/isa/Kconfig
+++ b/sound/isa/Kconfig
@@ -22,7 +22,7 @@ config SND_SB16_DSP
menuconfig SND_ISA
bool "ISA sound devices"
depends on ISA || COMPILE_TEST
- depends on ISA_DMA_API
+ depends on ISA_DMA_API && !M68K
default y
help
Support for sound devices connected via the ISA bus.
diff --git a/sound/pci/Kconfig b/sound/pci/Kconfig
index 93bc9bef7641f..41ce125971777 100644
--- a/sound/pci/Kconfig
+++ b/sound/pci/Kconfig
@@ -279,6 +279,7 @@ config SND_CS46XX_NEW_DSP
config SND_CS5530
tristate "CS5530 Audio"
depends on ISA_DMA_API && (X86_32 || COMPILE_TEST)
+ depends on !M68K
select SND_SB16_DSP
help
Say Y here to include support for audio on Cyrix/NatSemi CS5530 chips.
--
2.33.0
From: Tvrtko Ursulin <[email protected]>
[ Upstream commit 5240aed2cd2594fb392239f11b9681e5e1591619 ]
Handling of intel_iommu kernel command line option should return "true" to
indicate option is valid and so avoid logging it as unknown by the core
parsing code.
Also log unknown sub-options at the notice level to let user know of
potential typos or similar.
Reported-by: Eero Tamminen <[email protected]>
Signed-off-by: Tvrtko Ursulin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Lu Baolu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joerg Roedel <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/iommu/intel/iommu.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c
index d75f59ae28e6e..9a356075d3450 100644
--- a/drivers/iommu/intel/iommu.c
+++ b/drivers/iommu/intel/iommu.c
@@ -412,6 +412,7 @@ static int __init intel_iommu_setup(char *str)
{
if (!str)
return -EINVAL;
+
while (*str) {
if (!strncmp(str, "on", 2)) {
dmar_disabled = 0;
@@ -441,13 +442,16 @@ static int __init intel_iommu_setup(char *str)
} else if (!strncmp(str, "tboot_noforce", 13)) {
pr_info("Intel-IOMMU: not forcing on after tboot. This could expose security risk for tboot\n");
intel_iommu_tboot_noforce = 1;
+ } else {
+ pr_notice("Unknown option - '%s'\n", str);
}
str += strcspn(str, ",");
while (*str == ',')
str++;
}
- return 0;
+
+ return 1;
}
__setup("intel_iommu=", intel_iommu_setup);
--
2.33.0
From: Derek Fang <[email protected]>
[ Upstream commit 4b19e4a77cc6baa0f840e8bae62ab974667f6207 ]
A little pop can be heard obviously from HP while playing a silent.
This patch fixes it by using two functions:
1. Enable HP 1bit output mode.
2. Change the charge pump switch size during playback on and off.
Signed-off-by: Derek Fang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/soc/codecs/rt5682.c | 56 +++++++++++++++++++++++++++++++++------
sound/soc/codecs/rt5682.h | 20 ++++++++++++++
2 files changed, 68 insertions(+), 8 deletions(-)
diff --git a/sound/soc/codecs/rt5682.c b/sound/soc/codecs/rt5682.c
index 4a64cab99c55b..d550c0705c28b 100644
--- a/sound/soc/codecs/rt5682.c
+++ b/sound/soc/codecs/rt5682.c
@@ -46,6 +46,8 @@ static const struct reg_sequence patch_list[] = {
{RT5682_SAR_IL_CMD_1, 0x22b7},
{RT5682_SAR_IL_CMD_3, 0x0365},
{RT5682_SAR_IL_CMD_6, 0x0110},
+ {RT5682_CHARGE_PUMP_1, 0x0210},
+ {RT5682_HP_LOGIC_CTRL_2, 0x0007},
};
void rt5682_apply_patch_list(struct rt5682_priv *rt5682, struct device *dev)
@@ -1515,21 +1517,29 @@ static int rt5682_hp_event(struct snd_soc_dapm_widget *w,
switch (event) {
case SND_SOC_DAPM_PRE_PMU:
- snd_soc_component_write(component,
- RT5682_HP_LOGIC_CTRL_2, 0x0012);
- snd_soc_component_write(component,
- RT5682_HP_CTRL_2, 0x6000);
+ snd_soc_component_update_bits(component, RT5682_HP_CTRL_2,
+ RT5682_HP_C2_DAC_AMP_MUTE, 0);
+ snd_soc_component_update_bits(component, RT5682_HP_LOGIC_CTRL_2,
+ RT5682_HP_LC2_SIG_SOUR2_MASK, RT5682_HP_LC2_SIG_SOUR2_REG);
snd_soc_component_update_bits(component,
RT5682_DEPOP_1, 0x60, 0x60);
snd_soc_component_update_bits(component,
RT5682_DAC_ADC_DIG_VOL1, 0x00c0, 0x0080);
+ snd_soc_component_update_bits(component, RT5682_HP_CTRL_2,
+ RT5682_HP_C2_DAC_L_EN | RT5682_HP_C2_DAC_R_EN,
+ RT5682_HP_C2_DAC_L_EN | RT5682_HP_C2_DAC_R_EN);
+ usleep_range(5000, 10000);
+ snd_soc_component_update_bits(component, RT5682_CHARGE_PUMP_1,
+ RT5682_CP_SW_SIZE_MASK, RT5682_CP_SW_SIZE_L);
break;
case SND_SOC_DAPM_POST_PMD:
+ snd_soc_component_update_bits(component, RT5682_HP_CTRL_2,
+ RT5682_HP_C2_DAC_L_EN | RT5682_HP_C2_DAC_R_EN, 0);
+ snd_soc_component_update_bits(component, RT5682_CHARGE_PUMP_1,
+ RT5682_CP_SW_SIZE_MASK, RT5682_CP_SW_SIZE_M);
snd_soc_component_update_bits(component,
RT5682_DEPOP_1, 0x60, 0x0);
- snd_soc_component_write(component,
- RT5682_HP_CTRL_2, 0x0000);
snd_soc_component_update_bits(component,
RT5682_DAC_ADC_DIG_VOL1, 0x00c0, 0x0000);
break;
@@ -1637,6 +1647,23 @@ static SOC_VALUE_ENUM_SINGLE_DECL(rt5682_adcdat_pin_enum,
static const struct snd_kcontrol_new rt5682_adcdat_pin_ctrl =
SOC_DAPM_ENUM("ADCDAT", rt5682_adcdat_pin_enum);
+static const unsigned int rt5682_hpo_sig_out_values[] = {
+ 2,
+ 7,
+};
+
+static const char * const rt5682_hpo_sig_out_mode[] = {
+ "Legacy",
+ "OneBit",
+};
+
+static SOC_VALUE_ENUM_SINGLE_DECL(rt5682_hpo_sig_out_enum,
+ RT5682_HP_LOGIC_CTRL_2, 0, RT5682_HP_LC2_SIG_SOUR1_MASK,
+ rt5682_hpo_sig_out_mode, rt5682_hpo_sig_out_values);
+
+static const struct snd_kcontrol_new rt5682_hpo_sig_demux =
+ SOC_DAPM_ENUM("HPO Signal Demux", rt5682_hpo_sig_out_enum);
+
static const struct snd_soc_dapm_widget rt5682_dapm_widgets[] = {
SND_SOC_DAPM_SUPPLY("LDO2", RT5682_PWR_ANLG_3, RT5682_PWR_LDO2_BIT,
0, NULL, 0),
@@ -1820,6 +1847,10 @@ static const struct snd_soc_dapm_widget rt5682_dapm_widgets[] = {
SND_SOC_DAPM_SWITCH("HPOR Playback", SND_SOC_NOPM, 0, 0,
&hpor_switch),
+ SND_SOC_DAPM_OUT_DRV("HPO Legacy", SND_SOC_NOPM, 0, 0, NULL, 0),
+ SND_SOC_DAPM_OUT_DRV("HPO OneBit", SND_SOC_NOPM, 0, 0, NULL, 0),
+ SND_SOC_DAPM_DEMUX("HPO Signal Demux", SND_SOC_NOPM, 0, 0, &rt5682_hpo_sig_demux),
+
/* CLK DET */
SND_SOC_DAPM_SUPPLY("CLKDET SYS", RT5682_CLK_DET,
RT5682_SYS_CLK_DET_SFT, 0, NULL, 0),
@@ -1987,10 +2018,19 @@ static const struct snd_soc_dapm_route rt5682_dapm_routes[] = {
{"HP Amp", NULL, "Charge Pump"},
{"HP Amp", NULL, "CLKDET SYS"},
{"HP Amp", NULL, "Vref1"},
- {"HPOL Playback", "Switch", "HP Amp"},
- {"HPOR Playback", "Switch", "HP Amp"},
+
+ {"HPO Signal Demux", NULL, "HP Amp"},
+
+ {"HPO Legacy", "Legacy", "HPO Signal Demux"},
+ {"HPO OneBit", "OneBit", "HPO Signal Demux"},
+
+ {"HPOL Playback", "Switch", "HPO Legacy"},
+ {"HPOR Playback", "Switch", "HPO Legacy"},
+
{"HPOL", NULL, "HPOL Playback"},
{"HPOR", NULL, "HPOR Playback"},
+ {"HPOL", NULL, "HPO OneBit"},
+ {"HPOR", NULL, "HPO OneBit"},
};
static int rt5682_set_tdm_slot(struct snd_soc_dai *dai, unsigned int tx_mask,
diff --git a/sound/soc/codecs/rt5682.h b/sound/soc/codecs/rt5682.h
index b59221048ebf9..8e3244a62c160 100644
--- a/sound/soc/codecs/rt5682.h
+++ b/sound/soc/codecs/rt5682.h
@@ -375,6 +375,14 @@
#define RT5682_R_VOL_MASK (0x3f)
#define RT5682_R_VOL_SFT 0
+/* Headphone Amp Control 2 (0x0003) */
+#define RT5682_HP_C2_DAC_AMP_MUTE_SFT 15
+#define RT5682_HP_C2_DAC_AMP_MUTE (0x1 << 15)
+#define RT5682_HP_C2_DAC_L_EN_SFT 14
+#define RT5682_HP_C2_DAC_L_EN (0x1 << 14)
+#define RT5682_HP_C2_DAC_R_EN_SFT 13
+#define RT5682_HP_C2_DAC_R_EN (0x1 << 13)
+
/*Headphone Amp L/R Analog Gain and Digital NG2 Gain Control (0x0005 0x0006)*/
#define RT5682_G_HP (0xf << 8)
#define RT5682_G_HP_SFT 8
@@ -1265,6 +1273,10 @@
#define RT5682_HPA_CP_BIAS_6UA (0x3 << 2)
/* Charge Pump Internal Register1 (0x0125) */
+#define RT5682_CP_SW_SIZE_MASK (0x7 << 8)
+#define RT5682_CP_SW_SIZE_L (0x4 << 8)
+#define RT5682_CP_SW_SIZE_M (0x2 << 8)
+#define RT5682_CP_SW_SIZE_S (0x1 << 8)
#define RT5682_CP_CLK_HP_MASK (0x3 << 4)
#define RT5682_CP_CLK_HP_100KHZ (0x0 << 4)
#define RT5682_CP_CLK_HP_200KHZ (0x1 << 4)
@@ -1315,6 +1327,14 @@
#define RT5682_DEB_STO_DAC_MASK (0x7 << 4)
#define RT5682_DEB_80_MS (0x0 << 4)
+/* HP Behavior Logic Control 2 (0x01db) */
+#define RT5682_HP_LC2_SIG_SOUR2_MASK (0x1 << 4)
+#define RT5682_HP_LC2_SIG_SOUR2_REG (0x1 << 4)
+#define RT5682_HP_LC2_SIG_SOUR2_DC_CAL (0x0 << 4)
+#define RT5682_HP_LC2_SIG_SOUR1_MASK (0x7)
+#define RT5682_HP_LC2_SIG_SOUR1_1BIT (0x7)
+#define RT5682_HP_LC2_SIG_SOUR1_LEGA (0x2)
+
/* SAR ADC Inline Command Control 1 (0x0210) */
#define RT5682_SAR_BUTT_DET_MASK (0x1 << 15)
#define RT5682_SAR_BUTT_DET_EN (0x1 << 15)
--
2.33.0
From: Randy Dunlap <[email protected]>
[ Upstream commit fda1bc533094a7db68b11e7503d2c6c73993d12a ]
FRAME_POINTER depends on DEBUG_KERNEL so DWARF_UNWINDER should
depend on DEBUG_KERNEL before selecting FRAME_POINTER.
WARNING: unmet direct dependencies detected for FRAME_POINTER
Depends on [n]: DEBUG_KERNEL [=n] && (M68K || UML || SUPERH [=y]) || ARCH_WANT_FRAME_POINTERS [=n]
Selected by [y]:
- DWARF_UNWINDER [=y]
Fixes: bd353861c735 ("sh: dwarf unwinder support.")
Signed-off-by: Randy Dunlap <[email protected]>
Cc: Matt Fleming <[email protected]>
Cc: Matt Fleming <[email protected]>
Cc: Yoshinori Sato <[email protected]>
Cc: John Paul Adrian Glaubitz <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Tested-by: John Paul Adrian Glaubitz <[email protected]>
Signed-off-by: Rich Felker <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/sh/Kconfig.debug | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug
index 958f790273ab9..10290e5c1f438 100644
--- a/arch/sh/Kconfig.debug
+++ b/arch/sh/Kconfig.debug
@@ -54,6 +54,7 @@ config DUMP_CODE
config DWARF_UNWINDER
bool "Enable the DWARF unwinder for stacktraces"
+ depends on DEBUG_KERNEL
select FRAME_POINTER
default n
help
--
2.33.0
From: Randy Dunlap <[email protected]>
[ Upstream commit e2f4b3be1d3c73176db734565b160250cc1300dd ]
For MIPS pre-boot, when CONFIG_KERNEL_ZSTD=y, the decompressor
function uses __bswapdi2(), so this object file should be added to
the target object file.
Fixes these build errors:
mips-linux-ld: arch/mips/boot/compressed/decompress.o: in function `xxh64':
decompress.c:(.text+0x8be0): undefined reference to `__bswapdi2'
mips-linux-ld: decompress.c:(.text+0x8c78): undefined reference to `__bswapdi2'
mips-linux-ld: decompress.c:(.text+0x8d04): undefined reference to `__bswapdi2'
mips-linux-ld: arch/mips/boot/compressed/decompress.o:decompress.c:(.text+0xa010): more undefined references to `__bswapdi2' follow
Fixes: 0652035a5794 ("asm-generic: unaligned: remove byteshift helpers")
Fixes: cddc40f5617e ("mips: always link byteswap helpers into decompressor")
Signed-off-by: Randy Dunlap <[email protected]>
Reported-by: kernel test robot <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Thomas Bogendoerfer <[email protected]>
Cc: [email protected]
Acked-by: Arnd Bergmann <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/mips/boot/compressed/Makefile | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/mips/boot/compressed/Makefile b/arch/mips/boot/compressed/Makefile
index 3548b3b452699..9112bdb86be45 100644
--- a/arch/mips/boot/compressed/Makefile
+++ b/arch/mips/boot/compressed/Makefile
@@ -56,6 +56,8 @@ $(obj)/uart-ath79.c: $(srctree)/arch/mips/ath79/early_printk.c
vmlinuzobjs-$(CONFIG_KERNEL_XZ) += $(obj)/ashldi3.o
+vmlinuzobjs-$(CONFIG_KERNEL_ZSTD) += $(obj)/bswapdi.o
+
extra-y += ashldi3.c
$(obj)/ashldi3.c: $(obj)/%.c: $(srctree)/lib/%.c FORCE
$(call if_changed,shipped)
@@ -64,6 +66,10 @@ extra-y += bswapsi.c
$(obj)/bswapsi.c: $(obj)/%.c: $(srctree)/arch/mips/lib/%.c FORCE
$(call if_changed,shipped)
+extra-y += bswapdi.c
+$(obj)/bswapdi.c: $(obj)/%.c: $(srctree)/arch/mips/lib/%.c FORCE
+ $(call if_changed,shipped)
+
targets := $(notdir $(vmlinuzobjs-y))
targets += vmlinux.bin
--
2.33.0
From: Randy Dunlap <[email protected]>
[ Upstream commit 5eeaafc8d69373c095e461bdb39e5c9b62228ac5 ]
Several header files need info on CONFIG_32BIT or CONFIG_64BIT,
but kconfig symbol BCM63XX does not provide that info. This leads
to many build errors, e.g.:
arch/mips/include/asm/page.h:196:13: error: use of undeclared identifier 'CAC_BASE'
return x - PAGE_OFFSET + PHYS_OFFSET;
arch/mips/include/asm/mach-generic/spaces.h:91:23: note: expanded from macro 'PAGE_OFFSET'
#define PAGE_OFFSET (CAC_BASE + PHYS_OFFSET)
arch/mips/include/asm/io.h:134:28: error: use of undeclared identifier 'CAC_BASE'
return (void *)(address + PAGE_OFFSET - PHYS_OFFSET);
arch/mips/include/asm/mach-generic/spaces.h:91:23: note: expanded from macro 'PAGE_OFFSET'
#define PAGE_OFFSET (CAC_BASE + PHYS_OFFSET)
arch/mips/include/asm/uaccess.h:82:10: error: use of undeclared identifier '__UA_LIMIT'
return (__UA_LIMIT & (addr | (addr + size) | __ua_size(size))) == 0;
Selecting the SYS_HAS_CPU_BMIPS* symbols causes SYS_HAS_CPU_BMIPS to be
set, which then selects CPU_SUPPORT_32BIT_KERNEL, which causes
CONFIG_32BIT to be set. (a bit more indirect than v1 [RFC].)
Fixes: e7300d04bd08 ("MIPS: BCM63xx: Add support for the Broadcom BCM63xx family of SOCs.")
Signed-off-by: Randy Dunlap <[email protected]>
Reported-by: kernel test robot <[email protected]>
Cc: Thomas Bogendoerfer <[email protected]>
Cc: Florian Fainelli <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: Paul Burton <[email protected]>
Cc: Maxime Bizon <[email protected]>
Cc: Ralf Baechle <[email protected]>
Suggested-by: Florian Fainelli <[email protected]>
Acked-by: Florian Fainelli <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/mips/Kconfig | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index cbbb302a460eb..a917d408d27d8 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -332,6 +332,9 @@ config BCM63XX
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_HAS_EARLY_PRINTK
+ select SYS_HAS_CPU_BMIPS32_3300
+ select SYS_HAS_CPU_BMIPS4350
+ select SYS_HAS_CPU_BMIPS4380
select SWAP_IO_SPACE
select GPIOLIB
select MIPS_L1_CACHE_SHIFT_4
--
2.33.0
From: Ian Rogers <[email protected]>
[ Upstream commit 4924b1f7c46711762fd0e65c135ccfbcfd6ded1f ]
perf_env__insert_btf() doesn't insert if a duplicate BTF id is
encountered and this causes a memory leak. Modify the function to return
a success/error value and then free the memory if insertion didn't
happen.
v2. Adds a return -1 when the insertion error occurs in
perf_env__fetch_btf. This doesn't affect anything as the result is
never checked.
Fixes: 3792cb2ff43b1b19 ("perf bpf: Save BTF in a rbtree in perf_env")
Signed-off-by: Ian Rogers <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexei Starovoitov <[email protected]>
Cc: Andrii Nakryiko <[email protected]>
Cc: Daniel Borkmann <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Fastabend <[email protected]>
Cc: KP Singh <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Martin KaFai Lau <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Tiezhu Yang <[email protected]>
Cc: Yonghong Song <[email protected]>
Cc: [email protected]
Cc: [email protected]
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/perf/util/bpf-event.c | 6 +++++-
tools/perf/util/env.c | 5 ++++-
tools/perf/util/env.h | 2 +-
3 files changed, 10 insertions(+), 3 deletions(-)
diff --git a/tools/perf/util/bpf-event.c b/tools/perf/util/bpf-event.c
index a410b3968b3af..16ad0e6e9e9c5 100644
--- a/tools/perf/util/bpf-event.c
+++ b/tools/perf/util/bpf-event.c
@@ -120,7 +120,11 @@ static int perf_env__fetch_btf(struct perf_env *env,
node->data_size = data_size;
memcpy(node->data, data, data_size);
- perf_env__insert_btf(env, node);
+ if (!perf_env__insert_btf(env, node)) {
+ /* Insertion failed because of a duplicate. */
+ free(node);
+ return -1;
+ }
return 0;
}
diff --git a/tools/perf/util/env.c b/tools/perf/util/env.c
index cf773f0dec384..5b24eb010336c 100644
--- a/tools/perf/util/env.c
+++ b/tools/perf/util/env.c
@@ -74,12 +74,13 @@ out:
return node;
}
-void perf_env__insert_btf(struct perf_env *env, struct btf_node *btf_node)
+bool perf_env__insert_btf(struct perf_env *env, struct btf_node *btf_node)
{
struct rb_node *parent = NULL;
__u32 btf_id = btf_node->id;
struct btf_node *node;
struct rb_node **p;
+ bool ret = true;
down_write(&env->bpf_progs.lock);
p = &env->bpf_progs.btfs.rb_node;
@@ -93,6 +94,7 @@ void perf_env__insert_btf(struct perf_env *env, struct btf_node *btf_node)
p = &(*p)->rb_right;
} else {
pr_debug("duplicated btf %u\n", btf_id);
+ ret = false;
goto out;
}
}
@@ -102,6 +104,7 @@ void perf_env__insert_btf(struct perf_env *env, struct btf_node *btf_node)
env->bpf_progs.btfs_cnt++;
out:
up_write(&env->bpf_progs.lock);
+ return ret;
}
struct btf_node *perf_env__find_btf(struct perf_env *env, __u32 btf_id)
diff --git a/tools/perf/util/env.h b/tools/perf/util/env.h
index 1383876f72b37..163e5ec503a26 100644
--- a/tools/perf/util/env.h
+++ b/tools/perf/util/env.h
@@ -167,7 +167,7 @@ void perf_env__insert_bpf_prog_info(struct perf_env *env,
struct bpf_prog_info_node *info_node);
struct bpf_prog_info_node *perf_env__find_bpf_prog_info(struct perf_env *env,
__u32 prog_id);
-void perf_env__insert_btf(struct perf_env *env, struct btf_node *btf_node);
+bool perf_env__insert_btf(struct perf_env *env, struct btf_node *btf_node);
struct btf_node *perf_env__find_btf(struct perf_env *env, __u32 btf_id);
int perf_env__numa_node(struct perf_env *env, int cpu);
--
2.33.0
From: Mathias Krause <[email protected]>
[ Upstream commit b027789e5e50494c2325cc70c8642e7fd6059479 ]
Kevin is reporting crashes which point to a use-after-free of a cfs_rq
in update_blocked_averages(). Initial debugging revealed that we've
live cfs_rq's (on_list=1) in an about to be kfree()'d task group in
free_fair_sched_group(). However, it was unclear how that can happen.
His kernel config happened to lead to a layout of struct sched_entity
that put the 'my_q' member directly into the middle of the object
which makes it incidentally overlap with SLUB's freelist pointer.
That, in combination with SLAB_FREELIST_HARDENED's freelist pointer
mangling, leads to a reliable access violation in form of a #GP which
made the UAF fail fast.
Michal seems to have run into the same issue[1]. He already correctly
diagnosed that commit a7b359fc6a37 ("sched/fair: Correctly insert
cfs_rq's to list on unthrottle") is causing the preconditions for the
UAF to happen by re-adding cfs_rq's also to task groups that have no
more running tasks, i.e. also to dead ones. His analysis, however,
misses the real root cause and it cannot be seen from the crash
backtrace only, as the real offender is tg_unthrottle_up() getting
called via sched_cfs_period_timer() via the timer interrupt at an
inconvenient time.
When unregister_fair_sched_group() unlinks all cfs_rq's from the dying
task group, it doesn't protect itself from getting interrupted. If the
timer interrupt triggers while we iterate over all CPUs or after
unregister_fair_sched_group() has finished but prior to unlinking the
task group, sched_cfs_period_timer() will execute and walk the list of
task groups, trying to unthrottle cfs_rq's, i.e. re-add them to the
dying task group. These will later -- in free_fair_sched_group() -- be
kfree()'ed while still being linked, leading to the fireworks Kevin
and Michal are seeing.
To fix this race, ensure the dying task group gets unlinked first.
However, simply switching the order of unregistering and unlinking the
task group isn't sufficient, as concurrent RCU walkers might still see
it, as can be seen below:
CPU1: CPU2:
: timer IRQ:
: do_sched_cfs_period_timer():
: :
: distribute_cfs_runtime():
: rcu_read_lock();
: :
: unthrottle_cfs_rq():
sched_offline_group(): :
: walk_tg_tree_from(…,tg_unthrottle_up,…):
list_del_rcu(&tg->list); :
(1) : list_for_each_entry_rcu(child, &parent->children, siblings)
: :
(2) list_del_rcu(&tg->siblings); :
: tg_unthrottle_up():
unregister_fair_sched_group(): struct cfs_rq *cfs_rq = tg->cfs_rq[cpu_of(rq)];
: :
list_del_leaf_cfs_rq(tg->cfs_rq[cpu]); :
: :
: if (!cfs_rq_is_decayed(cfs_rq) || cfs_rq->nr_running)
(3) : list_add_leaf_cfs_rq(cfs_rq);
: :
: :
: :
: :
: :
(4) : rcu_read_unlock();
CPU 2 walks the task group list in parallel to sched_offline_group(),
specifically, it'll read the soon to be unlinked task group entry at
(1). Unlinking it on CPU 1 at (2) therefore won't prevent CPU 2 from
still passing it on to tg_unthrottle_up(). CPU 1 now tries to unlink
all cfs_rq's via list_del_leaf_cfs_rq() in
unregister_fair_sched_group(). Meanwhile CPU 2 will re-add some of
these at (3), which is the cause of the UAF later on.
To prevent this additional race from happening, we need to wait until
walk_tg_tree_from() has finished traversing the task groups, i.e.
after the RCU read critical section ends in (4). Afterwards we're safe
to call unregister_fair_sched_group(), as each new walk won't see the
dying task group any more.
On top of that, we need to wait yet another RCU grace period after
unregister_fair_sched_group() to ensure print_cfs_stats(), which might
run concurrently, always sees valid objects, i.e. not already free'd
ones.
This patch survives Michal's reproducer[2] for 8h+ now, which used to
trigger within minutes before.
[1] https://lore.kernel.org/lkml/[email protected]/
[2] https://lore.kernel.org/lkml/[email protected]/
Fixes: a7b359fc6a37 ("sched/fair: Correctly insert cfs_rq's to list on unthrottle")
[peterz: shuffle code around a bit]
Reported-by: Kevin Tanguy <[email protected]>
Signed-off-by: Mathias Krause <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/sched/autogroup.c | 2 +-
kernel/sched/core.c | 44 ++++++++++++++++++++++++++++++++--------
kernel/sched/fair.c | 4 ++--
kernel/sched/rt.c | 12 ++++++++---
kernel/sched/sched.h | 3 ++-
5 files changed, 49 insertions(+), 16 deletions(-)
diff --git a/kernel/sched/autogroup.c b/kernel/sched/autogroup.c
index 2067080bb2358..8629b37d118e7 100644
--- a/kernel/sched/autogroup.c
+++ b/kernel/sched/autogroup.c
@@ -31,7 +31,7 @@ static inline void autogroup_destroy(struct kref *kref)
ag->tg->rt_se = NULL;
ag->tg->rt_rq = NULL;
#endif
- sched_offline_group(ag->tg);
+ sched_release_group(ag->tg);
sched_destroy_group(ag->tg);
}
diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index 2c34c7bd559f2..779f27a4b46ac 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -9720,6 +9720,22 @@ static void sched_free_group(struct task_group *tg)
kmem_cache_free(task_group_cache, tg);
}
+static void sched_free_group_rcu(struct rcu_head *rcu)
+{
+ sched_free_group(container_of(rcu, struct task_group, rcu));
+}
+
+static void sched_unregister_group(struct task_group *tg)
+{
+ unregister_fair_sched_group(tg);
+ unregister_rt_sched_group(tg);
+ /*
+ * We have to wait for yet another RCU grace period to expire, as
+ * print_cfs_stats() might run concurrently.
+ */
+ call_rcu(&tg->rcu, sched_free_group_rcu);
+}
+
/* allocate runqueue etc for a new task group */
struct task_group *sched_create_group(struct task_group *parent)
{
@@ -9763,25 +9779,35 @@ void sched_online_group(struct task_group *tg, struct task_group *parent)
}
/* rcu callback to free various structures associated with a task group */
-static void sched_free_group_rcu(struct rcu_head *rhp)
+static void sched_unregister_group_rcu(struct rcu_head *rhp)
{
/* Now it should be safe to free those cfs_rqs: */
- sched_free_group(container_of(rhp, struct task_group, rcu));
+ sched_unregister_group(container_of(rhp, struct task_group, rcu));
}
void sched_destroy_group(struct task_group *tg)
{
/* Wait for possible concurrent references to cfs_rqs complete: */
- call_rcu(&tg->rcu, sched_free_group_rcu);
+ call_rcu(&tg->rcu, sched_unregister_group_rcu);
}
-void sched_offline_group(struct task_group *tg)
+void sched_release_group(struct task_group *tg)
{
unsigned long flags;
- /* End participation in shares distribution: */
- unregister_fair_sched_group(tg);
-
+ /*
+ * Unlink first, to avoid walk_tg_tree_from() from finding us (via
+ * sched_cfs_period_timer()).
+ *
+ * For this to be effective, we have to wait for all pending users of
+ * this task group to leave their RCU critical section to ensure no new
+ * user will see our dying task group any more. Specifically ensure
+ * that tg_unthrottle_up() won't add decayed cfs_rq's to it.
+ *
+ * We therefore defer calling unregister_fair_sched_group() to
+ * sched_unregister_group() which is guarantied to get called only after the
+ * current RCU grace period has expired.
+ */
spin_lock_irqsave(&task_group_lock, flags);
list_del_rcu(&tg->list);
list_del_rcu(&tg->siblings);
@@ -9900,7 +9926,7 @@ static void cpu_cgroup_css_released(struct cgroup_subsys_state *css)
{
struct task_group *tg = css_tg(css);
- sched_offline_group(tg);
+ sched_release_group(tg);
}
static void cpu_cgroup_css_free(struct cgroup_subsys_state *css)
@@ -9910,7 +9936,7 @@ static void cpu_cgroup_css_free(struct cgroup_subsys_state *css)
/*
* Relies on the RCU grace period between css_released() and this.
*/
- sched_free_group(tg);
+ sched_unregister_group(tg);
}
/*
diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c
index f6a05d9b54436..6f16dfb742462 100644
--- a/kernel/sched/fair.c
+++ b/kernel/sched/fair.c
@@ -11358,8 +11358,6 @@ void free_fair_sched_group(struct task_group *tg)
{
int i;
- destroy_cfs_bandwidth(tg_cfs_bandwidth(tg));
-
for_each_possible_cpu(i) {
if (tg->cfs_rq)
kfree(tg->cfs_rq[i]);
@@ -11436,6 +11434,8 @@ void unregister_fair_sched_group(struct task_group *tg)
struct rq *rq;
int cpu;
+ destroy_cfs_bandwidth(tg_cfs_bandwidth(tg));
+
for_each_possible_cpu(cpu) {
if (tg->se[cpu])
remove_entity_load_avg(tg->se[cpu]);
diff --git a/kernel/sched/rt.c b/kernel/sched/rt.c
index 3daf42a0f4623..bfef3f39b5552 100644
--- a/kernel/sched/rt.c
+++ b/kernel/sched/rt.c
@@ -137,13 +137,17 @@ static inline struct rq *rq_of_rt_se(struct sched_rt_entity *rt_se)
return rt_rq->rq;
}
-void free_rt_sched_group(struct task_group *tg)
+void unregister_rt_sched_group(struct task_group *tg)
{
- int i;
-
if (tg->rt_se)
destroy_rt_bandwidth(&tg->rt_bandwidth);
+}
+
+void free_rt_sched_group(struct task_group *tg)
+{
+ int i;
+
for_each_possible_cpu(i) {
if (tg->rt_rq)
kfree(tg->rt_rq[i]);
@@ -250,6 +254,8 @@ static inline struct rt_rq *rt_rq_of_se(struct sched_rt_entity *rt_se)
return &rq->rt;
}
+void unregister_rt_sched_group(struct task_group *tg) { }
+
void free_rt_sched_group(struct task_group *tg) { }
int alloc_rt_sched_group(struct task_group *tg, struct task_group *parent)
diff --git a/kernel/sched/sched.h b/kernel/sched/sched.h
index 3d3e5793e1172..4f432826933da 100644
--- a/kernel/sched/sched.h
+++ b/kernel/sched/sched.h
@@ -486,6 +486,7 @@ extern void __refill_cfs_bandwidth_runtime(struct cfs_bandwidth *cfs_b);
extern void start_cfs_bandwidth(struct cfs_bandwidth *cfs_b);
extern void unthrottle_cfs_rq(struct cfs_rq *cfs_rq);
+extern void unregister_rt_sched_group(struct task_group *tg);
extern void free_rt_sched_group(struct task_group *tg);
extern int alloc_rt_sched_group(struct task_group *tg, struct task_group *parent);
extern void init_tg_rt_entry(struct task_group *tg, struct rt_rq *rt_rq,
@@ -501,7 +502,7 @@ extern struct task_group *sched_create_group(struct task_group *parent);
extern void sched_online_group(struct task_group *tg,
struct task_group *parent);
extern void sched_destroy_group(struct task_group *tg);
-extern void sched_offline_group(struct task_group *tg);
+extern void sched_release_group(struct task_group *tg);
extern void sched_move_task(struct task_struct *tsk);
--
2.33.0
From: Laibin Qiu <[email protected]>
[ Upstream commit b781d8db580c058ecd54ed7d5dde7f8270b25f5b ]
KASAN reports a use-after-free report when doing block test:
==================================================================
[10050.967049] BUG: KASAN: use-after-free in
submit_bio_checks+0x1539/0x1550
[10050.977638] Call Trace:
[10050.978190] dump_stack+0x9b/0xce
[10050.979674] print_address_description.constprop.6+0x3e/0x60
[10050.983510] kasan_report.cold.9+0x22/0x3a
[10050.986089] submit_bio_checks+0x1539/0x1550
[10050.989576] submit_bio_noacct+0x83/0xc80
[10050.993714] submit_bio+0xa7/0x330
[10050.994435] mpage_readahead+0x380/0x500
[10050.998009] read_pages+0x1c1/0xbf0
[10051.002057] page_cache_ra_unbounded+0x4c2/0x6f0
[10051.007413] do_page_cache_ra+0xda/0x110
[10051.008207] force_page_cache_ra+0x23d/0x3d0
[10051.009087] page_cache_sync_ra+0xca/0x300
[10051.009970] generic_file_buffered_read+0xbea/0x2130
[10051.012685] generic_file_read_iter+0x315/0x490
[10051.014472] blkdev_read_iter+0x113/0x1b0
[10051.015300] aio_read+0x2ad/0x450
[10051.023786] io_submit_one+0xc8e/0x1d60
[10051.029855] __se_sys_io_submit+0x125/0x350
[10051.033442] do_syscall_64+0x2d/0x40
[10051.034156] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[10051.048733] Allocated by task 18598:
[10051.049482] kasan_save_stack+0x19/0x40
[10051.050263] __kasan_kmalloc.constprop.1+0xc1/0xd0
[10051.051230] kmem_cache_alloc+0x146/0x440
[10051.052060] mempool_alloc+0x125/0x2f0
[10051.052818] bio_alloc_bioset+0x353/0x590
[10051.053658] mpage_alloc+0x3b/0x240
[10051.054382] do_mpage_readpage+0xddf/0x1ef0
[10051.055250] mpage_readahead+0x264/0x500
[10051.056060] read_pages+0x1c1/0xbf0
[10051.056758] page_cache_ra_unbounded+0x4c2/0x6f0
[10051.057702] do_page_cache_ra+0xda/0x110
[10051.058511] force_page_cache_ra+0x23d/0x3d0
[10051.059373] page_cache_sync_ra+0xca/0x300
[10051.060198] generic_file_buffered_read+0xbea/0x2130
[10051.061195] generic_file_read_iter+0x315/0x490
[10051.062189] blkdev_read_iter+0x113/0x1b0
[10051.063015] aio_read+0x2ad/0x450
[10051.063686] io_submit_one+0xc8e/0x1d60
[10051.064467] __se_sys_io_submit+0x125/0x350
[10051.065318] do_syscall_64+0x2d/0x40
[10051.066082] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[10051.067455] Freed by task 13307:
[10051.068136] kasan_save_stack+0x19/0x40
[10051.068931] kasan_set_track+0x1c/0x30
[10051.069726] kasan_set_free_info+0x1b/0x30
[10051.070621] __kasan_slab_free+0x111/0x160
[10051.071480] kmem_cache_free+0x94/0x460
[10051.072256] mempool_free+0xd6/0x320
[10051.072985] bio_free+0xe0/0x130
[10051.073630] bio_put+0xab/0xe0
[10051.074252] bio_endio+0x3a6/0x5d0
[10051.074984] blk_update_request+0x590/0x1370
[10051.075870] scsi_end_request+0x7d/0x400
[10051.076667] scsi_io_completion+0x1aa/0xe50
[10051.077503] scsi_softirq_done+0x11b/0x240
[10051.078344] blk_mq_complete_request+0xd4/0x120
[10051.079275] scsi_mq_done+0xf0/0x200
[10051.080036] virtscsi_vq_done+0xbc/0x150
[10051.080850] vring_interrupt+0x179/0x390
[10051.081650] __handle_irq_event_percpu+0xf7/0x490
[10051.082626] handle_irq_event_percpu+0x7b/0x160
[10051.083527] handle_irq_event+0xcc/0x170
[10051.084297] handle_edge_irq+0x215/0xb20
[10051.085122] asm_call_irq_on_stack+0xf/0x20
[10051.085986] common_interrupt+0xae/0x120
[10051.086830] asm_common_interrupt+0x1e/0x40
==================================================================
Bio will be checked at beginning of submit_bio_noacct(). If bio needs
to be throttled, it will start the timer and stop submit bio directly.
Bio will submit in blk_throtl_dispatch_work_fn() when the timer expires.
But in the current process, if bio is throttled, it will still set bio
issue->value by blkcg_bio_issue_init(). This is redundant and may cause
the above use-after-free.
CPU0 CPU1
submit_bio
submit_bio_noacct
submit_bio_checks
blk_throtl_bio()
<=mod_timer(&sq->pending_timer
blk_throtl_dispatch_work_fn
submit_bio_noacct() <= bio have
throttle tag, will throw directly
and bio issue->value will be set
here
bio_endio()
bio_put()
bio_free() <= free this bio
blkcg_bio_issue_init(bio)
<= bio has been freed and
will lead to UAF
return BLK_QC_T_NONE
Fix this by remove extra blkcg_bio_issue_init.
Fixes: e439bedf6b24 (blkcg: consolidate bio_issue_init() to be a part of core)
Signed-off-by: Laibin Qiu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
block/blk-core.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/block/blk-core.c b/block/blk-core.c
index 4d8f5fe915887..12aa8c1da6003 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -887,10 +887,8 @@ static noinline_for_stack bool submit_bio_checks(struct bio *bio)
if (unlikely(!current->io_context))
create_task_io_context(current, GFP_ATOMIC, q->node);
- if (blk_throtl_bio(bio)) {
- blkcg_bio_issue_init(bio);
+ if (blk_throtl_bio(bio))
return false;
- }
blk_cgroup_bio_start(bio);
blkcg_bio_issue_init(bio);
--
2.33.0
From: Vincent Donnefort <[email protected]>
[ Upstream commit 42dc938a590c96eeb429e1830123fef2366d9c80 ]
Nothing protects the access to the per_cpu variable sd_llc_id. When testing
the same CPU (i.e. this_cpu == that_cpu), a race condition exists with
update_top_cache_domain(). One scenario being:
CPU1 CPU2
==================================================================
per_cpu(sd_llc_id, CPUX) => 0
partition_sched_domains_locked()
detach_destroy_domains()
cpus_share_cache(CPUX, CPUX) update_top_cache_domain(CPUX)
per_cpu(sd_llc_id, CPUX) => 0
per_cpu(sd_llc_id, CPUX) = CPUX
per_cpu(sd_llc_id, CPUX) => CPUX
return false
ttwu_queue_cond() wouldn't catch smp_processor_id() == cpu and the result
is a warning triggered from ttwu_queue_wakelist().
Avoid a such race in cpus_share_cache() by always returning true when
this_cpu == that_cpu.
Fixes: 518cd6234178 ("sched: Only queue remote wakeups when crossing cache boundaries")
Reported-by: Jing-Ting Wu <[email protected]>
Signed-off-by: Vincent Donnefort <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Valentin Schneider <[email protected]>
Reviewed-by: Vincent Guittot <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/sched/core.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index aea60eae21a7f..2c34c7bd559f2 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -3707,6 +3707,9 @@ out:
bool cpus_share_cache(int this_cpu, int that_cpu)
{
+ if (this_cpu == that_cpu)
+ return true;
+
return per_cpu(sd_llc_id, this_cpu) == per_cpu(sd_llc_id, that_cpu);
}
--
2.33.0
From: Sohaib Mohamed <[email protected]>
[ Upstream commit 88e48238d53682281c9de2a0b65d24d3b64542a0 ]
ASan reports memory leaks while running:
$ sudo ./perf bench futex all
The leaks are caused by perf_cpu_map__new not being freed.
This patch adds the missing perf_cpu_map__put since it calls
cpu_map_delete implicitly.
Fixes: 9c3516d1b850ea93 ("libperf: Add perf_cpu_map__new()/perf_cpu_map__read() functions")
Signed-off-by: Sohaib Mohamed <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: André Almeida <[email protected]>
Cc: Darren Hart <[email protected]>
Cc: Davidlohr Bueso <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Sohaib Mohamed <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/perf/bench/futex-lock-pi.c | 1 +
tools/perf/bench/futex-requeue.c | 1 +
tools/perf/bench/futex-wake-parallel.c | 1 +
tools/perf/bench/futex-wake.c | 1 +
4 files changed, 4 insertions(+)
diff --git a/tools/perf/bench/futex-lock-pi.c b/tools/perf/bench/futex-lock-pi.c
index 5d1fe9c35807a..137890f78e17a 100644
--- a/tools/perf/bench/futex-lock-pi.c
+++ b/tools/perf/bench/futex-lock-pi.c
@@ -233,6 +233,7 @@ int bench_futex_lock_pi(int argc, const char **argv)
print_summary();
free(worker);
+ perf_cpu_map__put(cpu);
return ret;
err:
usage_with_options(bench_futex_lock_pi_usage, options);
diff --git a/tools/perf/bench/futex-requeue.c b/tools/perf/bench/futex-requeue.c
index 97fe31fd3a236..f7a5ffebb9408 100644
--- a/tools/perf/bench/futex-requeue.c
+++ b/tools/perf/bench/futex-requeue.c
@@ -294,6 +294,7 @@ int bench_futex_requeue(int argc, const char **argv)
print_summary();
free(worker);
+ perf_cpu_map__put(cpu);
return ret;
err:
usage_with_options(bench_futex_requeue_usage, options);
diff --git a/tools/perf/bench/futex-wake-parallel.c b/tools/perf/bench/futex-wake-parallel.c
index e970e6b9ad535..0983f40b4b408 100644
--- a/tools/perf/bench/futex-wake-parallel.c
+++ b/tools/perf/bench/futex-wake-parallel.c
@@ -329,6 +329,7 @@ int bench_futex_wake_parallel(int argc, const char **argv)
print_summary();
free(blocked_worker);
+ perf_cpu_map__put(cpu);
return ret;
}
#endif /* HAVE_PTHREAD_BARRIER */
diff --git a/tools/perf/bench/futex-wake.c b/tools/perf/bench/futex-wake.c
index 77f058a477903..2226a475e782b 100644
--- a/tools/perf/bench/futex-wake.c
+++ b/tools/perf/bench/futex-wake.c
@@ -222,5 +222,6 @@ int bench_futex_wake(int argc, const char **argv)
print_summary();
free(worker);
+ perf_cpu_map__put(cpu);
return ret;
}
--
2.33.0
From: James Clark <[email protected]>
[ Upstream commit a9cdc1c5e3700a5200e5ca1f90b6958b6483845b ]
Commit 463538a383a2 ("perf tests: Fix test 68 zstd compression for
s390") inadvertently removed the -g flag from all platforms rather than
just s390, because the [[ ]] construct fails in sh. Changing to single
brackets restores testing of call graphs and removes the following error
from the output:
$ ./perf test -v 85
85: Zstd perf.data compression/decompression :
--- start ---
test child forked, pid 50643
Collecting compressed record file:
./tests/shell/record+zstd_comp_decomp.sh: 15: [[: not found
Fixes: 463538a383a2 ("perf tests: Fix test 68 zstd compression for s390")
Signed-off-by: James Clark <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Florian Fainelli <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Fastabend <[email protected]>
Cc: KP Singh <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Martin KaFai Lau <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Sumanth Korikkar <[email protected]>
Cc: Thomas Richter <[email protected]>
Cc: Yonghong Song <[email protected]>
Cc: [email protected]
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/perf/tests/shell/record+zstd_comp_decomp.sh | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/perf/tests/shell/record+zstd_comp_decomp.sh b/tools/perf/tests/shell/record+zstd_comp_decomp.sh
index 8a168cf8bacca..49bd875d51227 100755
--- a/tools/perf/tests/shell/record+zstd_comp_decomp.sh
+++ b/tools/perf/tests/shell/record+zstd_comp_decomp.sh
@@ -12,7 +12,7 @@ skip_if_no_z_record() {
collect_z_record() {
echo "Collecting compressed record file:"
- [[ "$(uname -m)" != s390x ]] && gflag='-g'
+ [ "$(uname -m)" != s390x ] && gflag='-g'
$perf_tool record -o $trace_file $gflag -z -F 5000 -- \
dd count=500 if=/dev/urandom of=/dev/null
}
--
2.33.0
From: Randy Dunlap <[email protected]>
[ Upstream commit e25c252a9b033523c626f039d4b9a304f12f6775 ]
Delete ieee_fpe_handler() since it is not used. After that is done,
delete denormal_to_double() since it is not used:
.../arch/sh/math-emu/math.c:505:12: error: 'ieee_fpe_handler' defined but not used [-Werror=unused-function]
505 | static int ieee_fpe_handler(struct pt_regs *regs)
.../arch/sh/math-emu/math.c:477:13: error: 'denormal_to_double' defined but not used [-Werror=unused-function]
477 | static void denormal_to_double(struct sh_fpu_soft_struct *fpu, int n)
Fixes: 7caf62de25554da3 ("sh: remove unused do_fpu_error")
Signed-off-by: Randy Dunlap <[email protected]>
Cc: Takashi YOSHII <[email protected]>
Cc: Yoshinori Sato <[email protected]>
Cc: John Paul Adrian Glaubitz <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Rich Felker <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/sh/math-emu/math.c | 103 ----------------------------------------
1 file changed, 103 deletions(-)
diff --git a/arch/sh/math-emu/math.c b/arch/sh/math-emu/math.c
index e8be0eca0444a..615ba932c398e 100644
--- a/arch/sh/math-emu/math.c
+++ b/arch/sh/math-emu/math.c
@@ -467,109 +467,6 @@ static int fpu_emulate(u16 code, struct sh_fpu_soft_struct *fregs, struct pt_reg
return id_sys(fregs, regs, code);
}
-/**
- * denormal_to_double - Given denormalized float number,
- * store double float
- *
- * @fpu: Pointer to sh_fpu_soft structure
- * @n: Index to FP register
- */
-static void denormal_to_double(struct sh_fpu_soft_struct *fpu, int n)
-{
- unsigned long du, dl;
- unsigned long x = fpu->fpul;
- int exp = 1023 - 126;
-
- if (x != 0 && (x & 0x7f800000) == 0) {
- du = (x & 0x80000000);
- while ((x & 0x00800000) == 0) {
- x <<= 1;
- exp--;
- }
- x &= 0x007fffff;
- du |= (exp << 20) | (x >> 3);
- dl = x << 29;
-
- fpu->fp_regs[n] = du;
- fpu->fp_regs[n+1] = dl;
- }
-}
-
-/**
- * ieee_fpe_handler - Handle denormalized number exception
- *
- * @regs: Pointer to register structure
- *
- * Returns 1 when it's handled (should not cause exception).
- */
-static int ieee_fpe_handler(struct pt_regs *regs)
-{
- unsigned short insn = *(unsigned short *)regs->pc;
- unsigned short finsn;
- unsigned long nextpc;
- int nib[4] = {
- (insn >> 12) & 0xf,
- (insn >> 8) & 0xf,
- (insn >> 4) & 0xf,
- insn & 0xf};
-
- if (nib[0] == 0xb ||
- (nib[0] == 0x4 && nib[2] == 0x0 && nib[3] == 0xb)) /* bsr & jsr */
- regs->pr = regs->pc + 4;
-
- if (nib[0] == 0xa || nib[0] == 0xb) { /* bra & bsr */
- nextpc = regs->pc + 4 + ((short) ((insn & 0xfff) << 4) >> 3);
- finsn = *(unsigned short *) (regs->pc + 2);
- } else if (nib[0] == 0x8 && nib[1] == 0xd) { /* bt/s */
- if (regs->sr & 1)
- nextpc = regs->pc + 4 + ((char) (insn & 0xff) << 1);
- else
- nextpc = regs->pc + 4;
- finsn = *(unsigned short *) (regs->pc + 2);
- } else if (nib[0] == 0x8 && nib[1] == 0xf) { /* bf/s */
- if (regs->sr & 1)
- nextpc = regs->pc + 4;
- else
- nextpc = regs->pc + 4 + ((char) (insn & 0xff) << 1);
- finsn = *(unsigned short *) (regs->pc + 2);
- } else if (nib[0] == 0x4 && nib[3] == 0xb &&
- (nib[2] == 0x0 || nib[2] == 0x2)) { /* jmp & jsr */
- nextpc = regs->regs[nib[1]];
- finsn = *(unsigned short *) (regs->pc + 2);
- } else if (nib[0] == 0x0 && nib[3] == 0x3 &&
- (nib[2] == 0x0 || nib[2] == 0x2)) { /* braf & bsrf */
- nextpc = regs->pc + 4 + regs->regs[nib[1]];
- finsn = *(unsigned short *) (regs->pc + 2);
- } else if (insn == 0x000b) { /* rts */
- nextpc = regs->pr;
- finsn = *(unsigned short *) (regs->pc + 2);
- } else {
- nextpc = regs->pc + 2;
- finsn = insn;
- }
-
- if ((finsn & 0xf1ff) == 0xf0ad) { /* fcnvsd */
- struct task_struct *tsk = current;
-
- if ((tsk->thread.xstate->softfpu.fpscr & (1 << 17))) {
- /* FPU error */
- denormal_to_double (&tsk->thread.xstate->softfpu,
- (finsn >> 8) & 0xf);
- tsk->thread.xstate->softfpu.fpscr &=
- ~(FPSCR_CAUSE_MASK | FPSCR_FLAG_MASK);
- task_thread_info(tsk)->status |= TS_USEDFPU;
- } else {
- force_sig_fault(SIGFPE, FPE_FLTINV,
- (void __user *)regs->pc);
- }
-
- regs->pc = nextpc;
- return 1;
- }
-
- return 0;
-}
-
/**
* fpu_init - Initialize FPU registers
* @fpu: Pointer to software emulated FPU registers.
--
2.33.0
From: Steven Rostedt (VMware) <[email protected]>
[ Upstream commit 938aa33f14657c9ed9deea348b7d6f14b6d69cb7 ]
The string copies to the histogram storage has a max size of 256 bytes
(defined by MAX_FILTER_STR_VAL). Only the string size of the event field
needs to be copied to the event storage, but no more than what is in the
event storage. Although nothing should be bigger than 256 bytes, there's
no protection against overwriting of the storage if one day there is.
Copy no more than the destination size, and enforce it.
Also had to turn MAX_FILTER_STR_VAL into an unsigned int, to keep the
min() comparison of the string sizes of comparable types.
Link: https://lore.kernel.org/all/CAHk-=wjREUihCGrtRBwfX47y_KrLCGjiq3t6QtoNJpmVrAEb1w@mail.gmail.com/
Link: https://lkml.kernel.org/r/[email protected]
Cc: Ingo Molnar <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Tom Zanussi <[email protected]>
Reported-by: Linus Torvalds <[email protected]>
Reviewed-by: Masami Hiramatsu <[email protected]>
Fixes: 63f84ae6b82b ("tracing/histogram: Do not copy the fixed-size char array field over the field size")
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/linux/trace_events.h | 2 +-
kernel/trace/trace_events_hist.c | 9 +++++++--
2 files changed, 8 insertions(+), 3 deletions(-)
diff --git a/include/linux/trace_events.h b/include/linux/trace_events.h
index 3e475eeb5a995..57113190448c6 100644
--- a/include/linux/trace_events.h
+++ b/include/linux/trace_events.h
@@ -673,7 +673,7 @@ struct trace_event_file {
#define PERF_MAX_TRACE_SIZE 2048
-#define MAX_FILTER_STR_VAL 256 /* Should handle KSYM_SYMBOL_LEN */
+#define MAX_FILTER_STR_VAL 256U /* Should handle KSYM_SYMBOL_LEN */
enum event_trigger_type {
ETT_NONE = (0),
diff --git a/kernel/trace/trace_events_hist.c b/kernel/trace/trace_events_hist.c
index de37664ef0476..d860351b9dea6 100644
--- a/kernel/trace/trace_events_hist.c
+++ b/kernel/trace/trace_events_hist.c
@@ -2691,8 +2691,10 @@ static inline void __update_field_vars(struct tracing_map_elt *elt,
if (val->flags & HIST_FIELD_FL_STRING) {
char *str = elt_data->field_var_str[j++];
char *val_str = (char *)(uintptr_t)var_val;
+ unsigned int size;
- strscpy(str, val_str, val->size);
+ size = min(val->size, STR_VAR_LEN_MAX);
+ strscpy(str, val_str, size);
var_val = (u64)(uintptr_t)str;
}
tracing_map_set_var(elt, var_idx, var_val);
@@ -4579,6 +4581,7 @@ static void hist_trigger_elt_update(struct hist_trigger_data *hist_data,
if (hist_field->flags & HIST_FIELD_FL_STRING) {
unsigned int str_start, var_str_idx, idx;
char *str, *val_str;
+ unsigned int size;
str_start = hist_data->n_field_var_str +
hist_data->n_save_var_str;
@@ -4587,7 +4590,9 @@ static void hist_trigger_elt_update(struct hist_trigger_data *hist_data,
str = elt_data->field_var_str[idx];
val_str = (char *)(uintptr_t)hist_val;
- strscpy(str, val_str, hist_field->size);
+
+ size = min(hist_field->size, STR_VAR_LEN_MAX);
+ strscpy(str, val_str, size);
hist_val = (u64)(uintptr_t)str;
}
--
2.33.0
From: Jakub Kicinski <[email protected]>
[ Upstream commit 0cda7d4bac5fd29dceb13df26083333fa99d6bb4 ]
Commit a985442fdecb ("selftests: net: properly support IPv6 in GSO GRE test")
is not compatible with:
Ncat: Version 7.80 ( https://nmap.org/ncat )
(which is distributed with Fedora/Red Hat), tests fail with:
nc: invalid option -- 'N'
Let's switch to socat which is far more dependable.
Fixes: 025efa0a82df ("selftests: add simple GSO GRE test")
Fixes: a985442fdecb ("selftests: net: properly support IPv6 in GSO GRE test")
Tested-by: Andrea Righi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/net/gre_gso.sh | 16 +++++++++-------
1 file changed, 9 insertions(+), 7 deletions(-)
diff --git a/tools/testing/selftests/net/gre_gso.sh b/tools/testing/selftests/net/gre_gso.sh
index fdeb44d621eb9..3224651db97b8 100755
--- a/tools/testing/selftests/net/gre_gso.sh
+++ b/tools/testing/selftests/net/gre_gso.sh
@@ -118,16 +118,18 @@ gre_gst_test_checks()
local addr=$2
local proto=$3
- $NS_EXEC nc $proto -kl $port >/dev/null &
+ [ "$proto" == 6 ] && addr="[$addr]"
+
+ $NS_EXEC socat - tcp${proto}-listen:$port,reuseaddr,fork >/dev/null &
PID=$!
while ! $NS_EXEC ss -ltn | grep -q $port; do ((i++)); sleep 0.01; done
- cat $TMPFILE | timeout 1 nc $proto -N $addr $port
+ cat $TMPFILE | timeout 1 socat -u STDIN TCP:$addr:$port
log_test $? 0 "$name - copy file w/ TSO"
ethtool -K veth0 tso off
- cat $TMPFILE | timeout 1 nc $proto -N $addr $port
+ cat $TMPFILE | timeout 1 socat -u STDIN TCP:$addr:$port
log_test $? 0 "$name - copy file w/ GSO"
ethtool -K veth0 tso on
@@ -155,8 +157,8 @@ gre6_gso_test()
sleep 2
- gre_gst_test_checks GREv6/v4 172.16.2.2
- gre_gst_test_checks GREv6/v6 2001:db8:1::2 -6
+ gre_gst_test_checks GREv6/v4 172.16.2.2 4
+ gre_gst_test_checks GREv6/v6 2001:db8:1::2 6
cleanup
}
@@ -212,8 +214,8 @@ if [ ! -x "$(command -v ip)" ]; then
exit $ksft_skip
fi
-if [ ! -x "$(command -v nc)" ]; then
- echo "SKIP: Could not run test without nc tool"
+if [ ! -x "$(command -v socat)" ]; then
+ echo "SKIP: Could not run test without socat tool"
exit $ksft_skip
fi
--
2.33.0
From: Alex Elder <[email protected]>
[ Upstream commit 6e228d8cbb1cc6ba78022d406340e901e08d26e0 ]
Starting with IPA v4.5, the HOL_BLOCK_EN register must be written
twice when enabling head-of-line blocking avoidance.
Fixes: 84f9bd12d46db ("soc: qcom: ipa: IPA endpoints")
Signed-off-by: Alex Elder <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ipa/ipa_endpoint.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/net/ipa/ipa_endpoint.c b/drivers/net/ipa/ipa_endpoint.c
index 5528d97110d56..006da4642a0ba 100644
--- a/drivers/net/ipa/ipa_endpoint.c
+++ b/drivers/net/ipa/ipa_endpoint.c
@@ -868,6 +868,9 @@ ipa_endpoint_init_hol_block_enable(struct ipa_endpoint *endpoint, bool enable)
val = enable ? HOL_BLOCK_EN_FMASK : 0;
offset = IPA_REG_ENDP_INIT_HOL_BLOCK_EN_N_OFFSET(endpoint_id);
iowrite32(val, endpoint->ipa->reg_virt + offset);
+ /* When enabling, the register must be written twice for IPA v4.5+ */
+ if (enable && endpoint->ipa->version >= IPA_VERSION_4_5)
+ iowrite32(val, endpoint->ipa->reg_virt + offset);
}
void ipa_endpoint_modem_hol_block_clear_all(struct ipa *ipa)
--
2.33.0
From: Randy Dunlap <[email protected]>
[ Upstream commit b929926f01f2d14635345d22eafcf60feed1085e ]
Fix this by defining both ENDIAN macros in
<asm/sfp-machine.h> so that they can be utilized in
<math-emu/soft-fp.h> according to the latter's comment:
/* Allow sfp-machine to have its own byte order definitions. */
(This is what is done in arch/nds32/include/asm/sfp-machine.h.)
This placates these build warnings:
In file included from ../arch/sh/math-emu/math.c:23:
.../include/math-emu/single.h:50:21: warning: "__BIG_ENDIAN" is not defined, evaluates to 0 [-Wundef]
50 | #if __BYTE_ORDER == __BIG_ENDIAN
In file included from ../arch/sh/math-emu/math.c:24:
.../include/math-emu/double.h:59:21: warning: "__BIG_ENDIAN" is not defined, evaluates to 0 [-Wundef]
59 | #if __BYTE_ORDER == __BIG_ENDIAN
Fixes: 4b565680d163 ("sh: math-emu support")
Signed-off-by: Randy Dunlap <[email protected]>
Cc: Yoshinori Sato <[email protected]>
Cc: John Paul Adrian Glaubitz <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Tested-by: John Paul Adrian Glaubitz <[email protected]>
Signed-off-by: Rich Felker <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/sh/include/asm/sfp-machine.h | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/sh/include/asm/sfp-machine.h b/arch/sh/include/asm/sfp-machine.h
index cbc7cf8c97ce6..2d2423478b71d 100644
--- a/arch/sh/include/asm/sfp-machine.h
+++ b/arch/sh/include/asm/sfp-machine.h
@@ -13,6 +13,14 @@
#ifndef _SFP_MACHINE_H
#define _SFP_MACHINE_H
+#ifdef __BIG_ENDIAN__
+#define __BYTE_ORDER __BIG_ENDIAN
+#define __LITTLE_ENDIAN 0
+#else
+#define __BYTE_ORDER __LITTLE_ENDIAN
+#define __BIG_ENDIAN 0
+#endif
+
#define _FP_W_TYPE_SIZE 32
#define _FP_W_TYPE unsigned long
#define _FP_WS_TYPE signed long
--
2.33.0
From: Yang Yingliang <[email protected]>
[ Upstream commit 9eff2b2e59fda25051ab36cd1cb5014661df657b ]
It will cause null-ptr-deref if platform_get_resource() returns NULL,
we need check the return value.
Acked-by: Alan Stern <[email protected]>
Signed-off-by: Yang Yingliang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/host/ohci-tmio.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/host/ohci-tmio.c b/drivers/usb/host/ohci-tmio.c
index 08ec2ab0d95a5..3f3d62dc06746 100644
--- a/drivers/usb/host/ohci-tmio.c
+++ b/drivers/usb/host/ohci-tmio.c
@@ -199,7 +199,7 @@ static int ohci_hcd_tmio_drv_probe(struct platform_device *dev)
if (usb_disabled())
return -ENODEV;
- if (!cell)
+ if (!cell || !regs || !config || !sram)
return -EINVAL;
if (irq < 0)
--
2.33.0
From: Li Yang <[email protected]>
[ Upstream commit 1ee1500ef717eefb5d9bdaf97905cb81b4e69aa4 ]
This fixes dtbs-check error from simple-bus schema:
soc: thermal-zones: {'type': 'object'} is not allowed for {'cpu-thermal': ..... }
From schema: /home/leo/.local/lib/python3.8/site-packages/dtschema/schemas/simple-bus.yaml
Signed-off-by: Li Yang <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm/boot/dts/ls1021a.dtsi | 66 +++++++++++++++++-----------------
1 file changed, 33 insertions(+), 33 deletions(-)
diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index 4fce81422943b..f3b8540750b61 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -329,39 +329,6 @@
#thermal-sensor-cells = <1>;
};
- thermal-zones {
- cpu_thermal: cpu-thermal {
- polling-delay-passive = <1000>;
- polling-delay = <5000>;
-
- thermal-sensors = <&tmu 0>;
-
- trips {
- cpu_alert: cpu-alert {
- temperature = <85000>;
- hysteresis = <2000>;
- type = "passive";
- };
- cpu_crit: cpu-crit {
- temperature = <95000>;
- hysteresis = <2000>;
- type = "critical";
- };
- };
-
- cooling-maps {
- map0 {
- trip = <&cpu_alert>;
- cooling-device =
- <&cpu0 THERMAL_NO_LIMIT
- THERMAL_NO_LIMIT>,
- <&cpu1 THERMAL_NO_LIMIT
- THERMAL_NO_LIMIT>;
- };
- };
- };
- };
-
dspi0: spi@2100000 {
compatible = "fsl,ls1021a-v1.0-dspi";
#address-cells = <1>;
@@ -1016,4 +983,37 @@
big-endian;
};
};
+
+ thermal-zones {
+ cpu_thermal: cpu-thermal {
+ polling-delay-passive = <1000>;
+ polling-delay = <5000>;
+
+ thermal-sensors = <&tmu 0>;
+
+ trips {
+ cpu_alert: cpu-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ cpu_crit: cpu-crit {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert>;
+ cooling-device =
+ <&cpu0 THERMAL_NO_LIMIT
+ THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT
+ THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+ };
};
--
2.33.0
From: Dmitry Osipenko <[email protected]>
[ Upstream commit bdb1ffdad3b73e4d0538098fc02e2ea87a6b27cd ]
Check whether PMC is ready before proceeding with the cpuidle registration.
This fixes racing with the PMC driver probe order, which results in a
disabled deepest CC6 idling state if cpuidle driver is probed before the
PMC.
Acked-by: Daniel Lezcano <[email protected]>
Signed-off-by: Dmitry Osipenko <[email protected]>
Signed-off-by: Thierry Reding <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/cpuidle/cpuidle-tegra.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/cpuidle/cpuidle-tegra.c b/drivers/cpuidle/cpuidle-tegra.c
index 508bd9f237929..9845629aeb6d4 100644
--- a/drivers/cpuidle/cpuidle-tegra.c
+++ b/drivers/cpuidle/cpuidle-tegra.c
@@ -337,6 +337,9 @@ static void tegra_cpuidle_setup_tegra114_c7_state(void)
static int tegra_cpuidle_probe(struct platform_device *pdev)
{
+ if (tegra_pmc_get_suspend_mode() == TEGRA_SUSPEND_NOT_READY)
+ return -EPROBE_DEFER;
+
/* LP2 could be disabled in device-tree */
if (tegra_pmc_get_suspend_mode() < TEGRA_SUSPEND_LP2)
tegra_cpuidle_disable_state(TEGRA_CC6);
--
2.33.0
From: Like Xu <[email protected]>
[ Upstream commit 5863702561e625903ec678551cb056a4b19e0b8a ]
Just like what we do in the x86_get_event_constraints(), the
PERF_X86_EVENT_LBR_SELECT flag should also be propagated
to event->hw.flags so that the host lbr driver can save/restore
MSR_LBR_SELECT for the special vlbr event created by KVM or BPF.
Fixes: 097e4311cda9 ("perf/x86: Add constraint to create guest LBR event without hw counter")
Reported-by: Wanpeng Li <[email protected]>
Signed-off-by: Like Xu <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Tested-by: Wanpeng Li <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/events/intel/core.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/arch/x86/events/intel/core.c b/arch/x86/events/intel/core.c
index bc3f97f834011..c7f1cc433a6aa 100644
--- a/arch/x86/events/intel/core.c
+++ b/arch/x86/events/intel/core.c
@@ -2999,8 +2999,10 @@ intel_vlbr_constraints(struct perf_event *event)
{
struct event_constraint *c = &vlbr_constraint;
- if (unlikely(constraint_match(c, event->hw.config)))
+ if (unlikely(constraint_match(c, event->hw.config))) {
+ event->hw.flags |= c->flags;
return c;
+ }
return NULL;
}
--
2.33.0
From: Masami Hiramatsu <[email protected]>
[ Upstream commit 63f84ae6b82bb4dff672f76f30c6fd7b9d3766bc ]
Do not copy the fixed-size char array field of the events over
the field size. The histogram treats char array as a string and
there are 2 types of char array in the event, fixed-size and
dynamic string. The dynamic string (__data_loc) field must be
null terminated, but the fixed-size char array field may not
be null terminated (not a string, but just a data).
In that case, histogram can copy the data after the field.
This uses the original field size for fixed-size char array
field to restrict the histogram not to access over the original
field size.
Link: https://lkml.kernel.org/r/163673292822.195747.3696966210526410250.stgit@devnote2
Fixes: 02205a6752f2 (tracing: Add support for 'field variables')
Signed-off-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/trace/trace_events_hist.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/kernel/trace/trace_events_hist.c b/kernel/trace/trace_events_hist.c
index f01e442716e2f..de37664ef0476 100644
--- a/kernel/trace/trace_events_hist.c
+++ b/kernel/trace/trace_events_hist.c
@@ -1733,9 +1733,10 @@ static struct hist_field *create_hist_field(struct hist_trigger_data *hist_data,
if (!hist_field->type)
goto free;
- if (field->filter_type == FILTER_STATIC_STRING)
+ if (field->filter_type == FILTER_STATIC_STRING) {
hist_field->fn = hist_field_string;
- else if (field->filter_type == FILTER_DYN_STRING)
+ hist_field->size = field->size;
+ } else if (field->filter_type == FILTER_DYN_STRING)
hist_field->fn = hist_field_dynstring;
else
hist_field->fn = hist_field_pstring;
@@ -2691,7 +2692,7 @@ static inline void __update_field_vars(struct tracing_map_elt *elt,
char *str = elt_data->field_var_str[j++];
char *val_str = (char *)(uintptr_t)var_val;
- strscpy(str, val_str, STR_VAR_LEN_MAX);
+ strscpy(str, val_str, val->size);
var_val = (u64)(uintptr_t)str;
}
tracing_map_set_var(elt, var_idx, var_val);
@@ -4586,7 +4587,7 @@ static void hist_trigger_elt_update(struct hist_trigger_data *hist_data,
str = elt_data->field_var_str[idx];
val_str = (char *)(uintptr_t)hist_val;
- strscpy(str, val_str, STR_VAR_LEN_MAX);
+ strscpy(str, val_str, hist_field->size);
hist_val = (u64)(uintptr_t)str;
}
--
2.33.0
From: Johannes Berg <[email protected]>
[ Upstream commit 6dd2360334f3cb3b45fc1b8194c670090474b87c ]
Since commit a05829a7222e ("cfg80211: avoid holding the RTNL when
calling the driver") we've not only been protecting the pointer
to monitor_sdata with the RTNL, but also with the wiphy->mtx. This
is relevant in a number of lockdep assertions, e.g. the one we hit
in ieee80211_set_monitor_channel(). However, we're now protecting
all the assignments/dereferences, even the one in interface iter,
with the wiphy->mtx, so switch over the lockdep assertions to that
lock.
Fixes: a05829a7222e ("cfg80211: avoid holding the RTNL when calling the driver")
Signed-off-by: Johannes Berg <[email protected]>
Link: https://lore.kernel.org/r/20211112135143.cb8e8ceffef3.Iaa210f16f6904c8a7a24954fb3396da0ef86ec08@changeid
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/mac80211/cfg.c | 12 ++++++++----
net/mac80211/iface.c | 4 +++-
net/mac80211/util.c | 7 ++++---
3 files changed, 15 insertions(+), 8 deletions(-)
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index d69b31c20fe28..d3f62fd12f0b5 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -80,7 +80,8 @@ static int ieee80211_set_mon_options(struct ieee80211_sub_if_data *sdata,
}
/* also validate MU-MIMO change */
- monitor_sdata = rtnl_dereference(local->monitor_sdata);
+ monitor_sdata = wiphy_dereference(local->hw.wiphy,
+ local->monitor_sdata);
if (!monitor_sdata &&
(params->vht_mumimo_groups || params->vht_mumimo_follow_addr))
@@ -810,7 +811,8 @@ static int ieee80211_set_monitor_channel(struct wiphy *wiphy,
mutex_lock(&local->mtx);
if (local->use_chanctx) {
- sdata = rtnl_dereference(local->monitor_sdata);
+ sdata = wiphy_dereference(local->hw.wiphy,
+ local->monitor_sdata);
if (sdata) {
ieee80211_vif_release_channel(sdata);
ret = ieee80211_vif_use_channel(sdata, chandef,
@@ -2669,7 +2671,8 @@ static int ieee80211_set_tx_power(struct wiphy *wiphy,
sdata = IEEE80211_WDEV_TO_SUB_IF(wdev);
if (sdata->vif.type == NL80211_IFTYPE_MONITOR) {
- sdata = rtnl_dereference(local->monitor_sdata);
+ sdata = wiphy_dereference(local->hw.wiphy,
+ local->monitor_sdata);
if (!sdata)
return -EOPNOTSUPP;
}
@@ -2729,7 +2732,8 @@ static int ieee80211_set_tx_power(struct wiphy *wiphy,
mutex_unlock(&local->iflist_mtx);
if (has_monitor) {
- sdata = rtnl_dereference(local->monitor_sdata);
+ sdata = wiphy_dereference(local->hw.wiphy,
+ local->monitor_sdata);
if (sdata) {
sdata->user_power_level = local->user_power_level;
if (txp_type != sdata->vif.bss_conf.txpower_type)
diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index 62c95597704b4..041859b5b71d0 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -588,7 +588,7 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata, bool going_do
*/
if (local->suspended) {
WARN_ON(local->wowlan);
- WARN_ON(rtnl_dereference(local->monitor_sdata));
+ WARN_ON(rcu_access_pointer(local->monitor_sdata));
return;
}
@@ -932,6 +932,7 @@ int ieee80211_add_virtual_monitor(struct ieee80211_local *local)
return 0;
ASSERT_RTNL();
+ lockdep_assert_wiphy(local->hw.wiphy);
if (local->monitor_sdata)
return 0;
@@ -999,6 +1000,7 @@ void ieee80211_del_virtual_monitor(struct ieee80211_local *local)
return;
ASSERT_RTNL();
+ lockdep_assert_wiphy(local->hw.wiphy);
mutex_lock(&local->iflist_mtx);
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index 49cb96d251695..03ea4f929b997 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -796,7 +796,7 @@ static void __iterate_interfaces(struct ieee80211_local *local,
sdata = rcu_dereference_check(local->monitor_sdata,
lockdep_is_held(&local->iflist_mtx) ||
- lockdep_rtnl_is_held());
+ lockdep_is_held(&local->hw.wiphy->mtx));
if (sdata &&
(iter_flags & IEEE80211_IFACE_ITER_RESUME_ALL || !active_only ||
sdata->flags & IEEE80211_SDATA_IN_DRIVER))
@@ -2379,7 +2379,7 @@ int ieee80211_reconfig(struct ieee80211_local *local)
IEEE80211_TPT_LEDTRIG_FL_RADIO, 0);
/* add interfaces */
- sdata = rtnl_dereference(local->monitor_sdata);
+ sdata = wiphy_dereference(local->hw.wiphy, local->monitor_sdata);
if (sdata) {
/* in HW restart it exists already */
WARN_ON(local->resuming);
@@ -2424,7 +2424,8 @@ int ieee80211_reconfig(struct ieee80211_local *local)
WARN_ON(drv_add_chanctx(local, ctx));
mutex_unlock(&local->chanctx_mtx);
- sdata = rtnl_dereference(local->monitor_sdata);
+ sdata = wiphy_dereference(local->hw.wiphy,
+ local->monitor_sdata);
if (sdata && ieee80211_sdata_running(sdata))
ieee80211_assign_chanctx(local, sdata);
}
--
2.33.0
From: Alex Elder <[email protected]>
[ Upstream commit 816316cacad2b5abd5b41423cf04e4845239abd4 ]
The head-of-line blocking timer should only be modified when
head-of-line drop is disabled.
One of the steps in recovering from a modem crash is to enable
dropping of packets with timeout of 0 (immediate). We don't know
how the modem configured its endpoints, so before we program the
timer, we need to ensure HOL_BLOCK is disabled.
Fixes: 84f9bd12d46db ("soc: qcom: ipa: IPA endpoints")
Signed-off-by: Alex Elder <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ipa/ipa_endpoint.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/ipa/ipa_endpoint.c b/drivers/net/ipa/ipa_endpoint.c
index 006da4642a0ba..ef790fd0ab56a 100644
--- a/drivers/net/ipa/ipa_endpoint.c
+++ b/drivers/net/ipa/ipa_endpoint.c
@@ -853,6 +853,7 @@ static void ipa_endpoint_init_hol_block_timer(struct ipa_endpoint *endpoint,
u32 offset;
u32 val;
+ /* This should only be changed when HOL_BLOCK_EN is disabled */
offset = IPA_REG_ENDP_INIT_HOL_BLOCK_TIMER_N_OFFSET(endpoint_id);
val = hol_block_timer_val(ipa, microseconds);
iowrite32(val, ipa->reg_virt + offset);
@@ -883,6 +884,7 @@ void ipa_endpoint_modem_hol_block_clear_all(struct ipa *ipa)
if (endpoint->toward_ipa || endpoint->ee_id != GSI_EE_MODEM)
continue;
+ ipa_endpoint_init_hol_block_enable(endpoint, false);
ipa_endpoint_init_hol_block_timer(endpoint, 0);
ipa_endpoint_init_hol_block_enable(endpoint, true);
}
--
2.33.0
From: Li Zhijian <[email protected]>
[ Upstream commit 92a59d7f381d2caf69385bfa00590028e32eea26 ]
The gpio selftests build against the system includes rather than the
headers from the linux tree. This results in the compile failing if
the system includes are outdated.
Prefer the headers from the linux tree, as per other selftests.
Fixes: 8bc395a6a2e2 ("selftests: gpio: rework and simplify test implementation")
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Li Zhijian <[email protected]>
[Kent: reworded commit comment and added Fixes:]
Signed-off-by: Kent Gibson <[email protected]>
Signed-off-by: Bartosz Golaszewski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/gpio/Makefile | 1 +
1 file changed, 1 insertion(+)
diff --git a/tools/testing/selftests/gpio/Makefile b/tools/testing/selftests/gpio/Makefile
index 39f2bbe8dd3df..42ea7d2aa8440 100644
--- a/tools/testing/selftests/gpio/Makefile
+++ b/tools/testing/selftests/gpio/Makefile
@@ -3,5 +3,6 @@
TEST_PROGS := gpio-mockup.sh
TEST_FILES := gpio-mockup-sysfs.sh
TEST_GEN_PROGS_EXTENDED := gpio-mockup-cdev
+CFLAGS += -I../../../../usr/include
include ../lib.mk
--
2.33.0
From: Pavel Skripkin <[email protected]>
[ Upstream commit f8885ac89ce310570e5391fe0bf0ec9c7c9b4fdc ]
Smatch says:
bnx2x_init_ops.h:640 bnx2x_ilt_client_mem_op()
warn: variable dereferenced before check 'ilt' (see line 638)
Move ilt_cli variable initialization _after_ ilt validation, because
it's unsafe to deref the pointer before validation check.
Fixes: 523224a3b3cd ("bnx2x, cnic, bnx2i: use new FW/HSI")
Signed-off-by: Pavel Skripkin <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/broadcom/bnx2x/bnx2x_init_ops.h | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init_ops.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init_ops.h
index 1835d2e451c01..fc7fce642666c 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init_ops.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init_ops.h
@@ -635,11 +635,13 @@ static int bnx2x_ilt_client_mem_op(struct bnx2x *bp, int cli_num,
{
int i, rc;
struct bnx2x_ilt *ilt = BP_ILT(bp);
- struct ilt_client_info *ilt_cli = &ilt->clients[cli_num];
+ struct ilt_client_info *ilt_cli;
if (!ilt || !ilt->lines)
return -1;
+ ilt_cli = &ilt->clients[cli_num];
+
if (ilt_cli->flags & (ILT_CLIENT_SKIP_INIT | ILT_CLIENT_SKIP_MEM))
return 0;
--
2.33.0
From: Hyeong-Jun Kim <[email protected]>
[ Upstream commit 02d58cd253d7536c412993573fc6b3b4454960eb ]
Compresse file and normal file has differ in i_addr addressing,
specifically addrs per inode/block. So, we will face data loss, if we
disable the compression flag on non-empty files. Therefore we should
disallow not only enabling but disabling the compression flag on
non-empty files.
Fixes: 4c8ff7095bef ("f2fs: support data compression")
Signed-off-by: Sungjong Seo <[email protected]>
Signed-off-by: Hyeong-Jun Kim <[email protected]>
Reviewed-by: Chao Yu <[email protected]>
Signed-off-by: Jaegeuk Kim <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/f2fs/f2fs.h | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/fs/f2fs/f2fs.h b/fs/f2fs/f2fs.h
index b339ae89c1ad1..c242274e3479b 100644
--- a/fs/f2fs/f2fs.h
+++ b/fs/f2fs/f2fs.h
@@ -4152,8 +4152,7 @@ static inline bool f2fs_disable_compressed_file(struct inode *inode)
if (!f2fs_compressed_file(inode))
return true;
- if (S_ISREG(inode->i_mode) &&
- (get_dirty_pages(inode) || atomic_read(&fi->i_compr_blocks)))
+ if (S_ISREG(inode->i_mode) && F2FS_HAS_BLOCKS(inode))
return false;
fi->i_flags &= ~F2FS_COMPR_FL;
--
2.33.0
From: Sriharsha Basavapatna <[email protected]>
[ Upstream commit b0757491a118ae5727cf9f1c3a11544397d46596 ]
The driver does not check if hw-tc-offload is enabled for the device
before offloading a flow in the context of indirect block callback.
Fix this by checking NETIF_F_HW_TC in the features flag and rejecting
the offload request. This will avoid unnecessary dmesg error logs when
hw-tc-offload is disabled, such as these:
bnxt_en 0000:19:00.1 eno2np1: dev(ifindex=294) not on same switch
bnxt_en 0000:19:00.1 eno2np1: Error: bnxt_tc_add_flow: cookie=0xffff8dace1c88000 error=-22
bnxt_en 0000:19:00.0 eno1np0: dev(ifindex=294) not on same switch
bnxt_en 0000:19:00.0 eno1np0: Error: bnxt_tc_add_flow: cookie=0xffff8dace1c88000 error=-22
Reported-by: Marcelo Ricardo Leitner <[email protected]>
Fixes: 627c89d00fb9 ("bnxt_en: flow_offload: offload tunnel decap rules via indirect callbacks")
Signed-off-by: Sriharsha Basavapatna <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/broadcom/bnxt/bnxt_tc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_tc.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_tc.c
index e6a4a768b10b2..1471b6130a2b9 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_tc.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_tc.c
@@ -1868,7 +1868,7 @@ static int bnxt_tc_setup_indr_block_cb(enum tc_setup_type type,
struct flow_cls_offload *flower = type_data;
struct bnxt *bp = priv->bp;
- if (flower->common.chain_index)
+ if (!tc_cls_can_offload_and_chain0(bp->dev, type_data))
return -EOPNOTSUPP;
switch (type) {
--
2.33.0
From: Paul Cercueil <[email protected]>
[ Upstream commit ed84ef1cd7eddf933d4ffce2caa8161d6f947245 ]
Two fixes in one:
- In the "impose hardware constraints" block, the "logical" divider
value (aka. not translated to the hardware) was clamped to fit in the
register area, but this totally ignored the fact that the divider
value can itself have a fixed divider.
- The code that made sure that the divider value returned by the
function was a multiple of its own fixed divider could result in a
wrong value being calculated, because it was rounded down instead of
rounded up.
Fixes: 4afe2d1a6ed5 ("clk: ingenic: Allow divider value to be divided")
Co-developed-by: Artur Rojek <[email protected]>
Signed-off-by: Artur Rojek <[email protected]>
Signed-off-by: Paul Cercueil <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/ingenic/cgu.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/clk/ingenic/cgu.c b/drivers/clk/ingenic/cgu.c
index 266c7595d3302..af31633a8862e 100644
--- a/drivers/clk/ingenic/cgu.c
+++ b/drivers/clk/ingenic/cgu.c
@@ -453,15 +453,15 @@ ingenic_clk_calc_div(struct clk_hw *hw,
}
/* Impose hardware constraints */
- div = min_t(unsigned, div, 1 << clk_info->div.bits);
- div = max_t(unsigned, div, 1);
+ div = clamp_t(unsigned int, div, clk_info->div.div,
+ clk_info->div.div << clk_info->div.bits);
/*
* If the divider value itself must be divided before being written to
* the divider register, we must ensure we don't have any bits set that
* would be lost as a result of doing so.
*/
- div /= clk_info->div.div;
+ div = DIV_ROUND_UP(div, clk_info->div.div);
div *= clk_info->div.div;
return div;
--
2.33.0
From: Hans Verkuil <[email protected]>
[ Upstream commit 3cc1ae1fa70ab369e4645e38ce335a19438093ad ]
gv100_hdmi_ctrl() writes vendor_infoframe.subpack0_high to 0x6f0110, and
then overwrites it with 0. Just drop the overwrite with 0, that's clearly
a mistake.
Because of this issue the HDMI VIC is 0 instead of 1 in the HDMI Vendor
InfoFrame when transmitting 4kp30.
Signed-off-by: Hans Verkuil <[email protected]>
Fixes: 290ffeafcc1a ("drm/nouveau/disp/gv100: initial support")
Reviewed-by: Ben Skeggs <[email protected]>
Signed-off-by: Karol Herbst <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpu/drm/nouveau/nvkm/engine/disp/hdmigv100.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/gpu/drm/nouveau/nvkm/engine/disp/hdmigv100.c b/drivers/gpu/drm/nouveau/nvkm/engine/disp/hdmigv100.c
index 6e3c450eaacef..3ff49344abc77 100644
--- a/drivers/gpu/drm/nouveau/nvkm/engine/disp/hdmigv100.c
+++ b/drivers/gpu/drm/nouveau/nvkm/engine/disp/hdmigv100.c
@@ -62,7 +62,6 @@ gv100_hdmi_ctrl(struct nvkm_ior *ior, int head, bool enable, u8 max_ac_packet,
nvkm_wr32(device, 0x6f0108 + hdmi, vendor_infoframe.header);
nvkm_wr32(device, 0x6f010c + hdmi, vendor_infoframe.subpack0_low);
nvkm_wr32(device, 0x6f0110 + hdmi, vendor_infoframe.subpack0_high);
- nvkm_wr32(device, 0x6f0110 + hdmi, 0x00000000);
nvkm_wr32(device, 0x6f0114 + hdmi, 0x00000000);
nvkm_wr32(device, 0x6f0118 + hdmi, 0x00000000);
nvkm_wr32(device, 0x6f011c + hdmi, 0x00000000);
--
2.33.0
From: Dmitry Baryshkov <[email protected]>
[ Upstream commit 05cf3ec00d460b50088d421fb878a0f83f57e262 ]
The gcc_aggre1_pnoc_ahb_clk is crucial for the proper MSM8996/APQ8096
functioning. If it gets disabled, several subsytems will stop working
(including eMMC/SDCC and USB). There are no in-kernel users of this
clock, so it is much simpler to remove from the kernel.
The clock was first removed in the commit 9e60de1cf270 ("clk: qcom:
Remove gcc_aggre1_pnoc_ahb_clk from msm8996") by Stephen Boyd, but got
added back in the commit b567752144e3 ("clk: qcom: Add some missing gcc
clks for msm8996") by Rajendra Nayak.
Let's remove it again in hope that nobody adds it back.
Reported-by: Vladimir Zapolskiy <[email protected]>
Cc: Rajendra Nayak <[email protected]>
Cc: Konrad Dybcio <[email protected]>
Fixes: b567752144e3 ("clk: qcom: Add some missing gcc clks for msm8996")
Signed-off-by: Dmitry Baryshkov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/qcom/gcc-msm8996.c | 15 ---------------
1 file changed, 15 deletions(-)
diff --git a/drivers/clk/qcom/gcc-msm8996.c b/drivers/clk/qcom/gcc-msm8996.c
index 3c3a7ff045621..9b1674b28d45d 100644
--- a/drivers/clk/qcom/gcc-msm8996.c
+++ b/drivers/clk/qcom/gcc-msm8996.c
@@ -2937,20 +2937,6 @@ static struct clk_branch gcc_smmu_aggre0_ahb_clk = {
},
};
-static struct clk_branch gcc_aggre1_pnoc_ahb_clk = {
- .halt_reg = 0x82014,
- .clkr = {
- .enable_reg = 0x82014,
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gcc_aggre1_pnoc_ahb_clk",
- .parent_names = (const char *[]){ "periph_noc_clk_src" },
- .num_parents = 1,
- .ops = &clk_branch2_ops,
- },
- },
-};
-
static struct clk_branch gcc_aggre2_ufs_axi_clk = {
.halt_reg = 0x83014,
.clkr = {
@@ -3474,7 +3460,6 @@ static struct clk_regmap *gcc_msm8996_clocks[] = {
[GCC_AGGRE0_CNOC_AHB_CLK] = &gcc_aggre0_cnoc_ahb_clk.clkr,
[GCC_SMMU_AGGRE0_AXI_CLK] = &gcc_smmu_aggre0_axi_clk.clkr,
[GCC_SMMU_AGGRE0_AHB_CLK] = &gcc_smmu_aggre0_ahb_clk.clkr,
- [GCC_AGGRE1_PNOC_AHB_CLK] = &gcc_aggre1_pnoc_ahb_clk.clkr,
[GCC_AGGRE2_UFS_AXI_CLK] = &gcc_aggre2_ufs_axi_clk.clkr,
[GCC_AGGRE2_USB3_AXI_CLK] = &gcc_aggre2_usb3_axi_clk.clkr,
[GCC_QSPI_AHB_CLK] = &gcc_qspi_ahb_clk.clkr,
--
2.33.0
From: Quentin Perret <[email protected]>
[ Upstream commit 50a8d3315960c74095c59e204db44abd937d4b5d ]
We currently walk the hypervisor stage-1 page-table towards the end of
hyp init in nVHE protected mode and adjust the host page ownership
attributes in its stage-2 in order to get a consistent state from both
point of views. The walk is done on the entire hyp VA space, and expects
to only ever find page-level mappings. While this expectation is
reasonable in the half of hyp VA space that maps memory with a fixed
offset (see the loop in pkvm_create_mappings_locked()), it can be
incorrect in the other half where nothing prevents the usage of block
mappings. For instance, on systems where memory is physically aligned at
an address that happens to maps to a PMD aligned VA in the hyp_vmemmap,
kvm_pgtable_hyp_map() will install block mappings when backing the
hyp_vmemmap, which will later cause finalize_host_mappings() to fail.
Furthermore, it should be noted that all pages backing the hyp_vmemmap
are also mapped in the 'fixed offset range' of the hypervisor, which
implies that finalize_host_mappings() will walk both aliases and update
the host stage-2 attributes twice. The order in which this happens is
unpredictable, though, since the hyp VA layout is highly dependent on
the position of the idmap page, hence resulting in a fragile mess at
best.
In order to fix all of this, let's restrict the finalization walk to
only cover memory regions in the 'fixed-offset range' of the hyp VA
space and nothing else. This not only fixes a correctness issue, but
will also result in a slighlty faster hyp initialization overall.
Fixes: 2c50166c62ba ("KVM: arm64: Mark host bss and rodata section as shared")
Signed-off-by: Quentin Perret <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/kvm/hyp/nvhe/setup.c | 14 ++++++++++++--
1 file changed, 12 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/kvm/hyp/nvhe/setup.c b/arch/arm64/kvm/hyp/nvhe/setup.c
index 57c27846320f4..58ad9c5ba3112 100644
--- a/arch/arm64/kvm/hyp/nvhe/setup.c
+++ b/arch/arm64/kvm/hyp/nvhe/setup.c
@@ -177,7 +177,7 @@ static int finalize_host_mappings_walker(u64 addr, u64 end, u32 level,
phys = kvm_pte_to_phys(pte);
if (!addr_is_memory(phys))
- return 0;
+ return -EINVAL;
/*
* Adjust the host stage-2 mappings to match the ownership attributes
@@ -206,8 +206,18 @@ static int finalize_host_mappings(void)
.cb = finalize_host_mappings_walker,
.flags = KVM_PGTABLE_WALK_LEAF,
};
+ int i, ret;
+
+ for (i = 0; i < hyp_memblock_nr; i++) {
+ struct memblock_region *reg = &hyp_memory[i];
+ u64 start = (u64)hyp_phys_to_virt(reg->base);
+
+ ret = kvm_pgtable_walk(&pkvm_pgtable, start, reg->size, &walker);
+ if (ret)
+ return ret;
+ }
- return kvm_pgtable_walk(&pkvm_pgtable, 0, BIT(pkvm_pgtable.ia_bits), &walker);
+ return 0;
}
void __noreturn __pkvm_init_finalise(void)
--
2.33.0
From: Chao Yu <[email protected]>
[ Upstream commit cd6d697a6e2013a0a85f8b261b16c8cfd50c1f5f ]
In f2fs_balance_fs_bg(), it needs to check both NAT_ENTRIES and INO_ENTRIES
memory usage to decide whether we should skip background checkpoint, otherwise
we may always skip checking INO_ENTRIES memory usage, so that INO_ENTRIES may
potentially cause high memory footprint.
Fixes: 493720a48543 ("f2fs: fix to avoid REQ_TIME and CP_TIME collision")
Signed-off-by: Chao Yu <[email protected]>
Signed-off-by: Jaegeuk Kim <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/f2fs/segment.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/f2fs/segment.c b/fs/f2fs/segment.c
index a135d22474154..d716553bdc025 100644
--- a/fs/f2fs/segment.c
+++ b/fs/f2fs/segment.c
@@ -561,7 +561,7 @@ void f2fs_balance_fs_bg(struct f2fs_sb_info *sbi, bool from_bg)
goto do_sync;
/* checkpoint is the only way to shrink partial cached entries */
- if (f2fs_available_free_memory(sbi, NAT_ENTRIES) ||
+ if (f2fs_available_free_memory(sbi, NAT_ENTRIES) &&
f2fs_available_free_memory(sbi, INO_ENTRIES))
return;
--
2.33.0
From: Surabhi Boob <[email protected]>
[ Upstream commit 321421b57a12e933f92b228e0e6d0b2c6541f41d ]
While issuing VF Reset from the guest OS, the VF driver prints
logs about critical / Overflow error detection. This is not an
actual error since the VF_MBX_ARQLEN register is set to all FF's
for a short period of time and the VF would catch the bits set if
it was reading the register during that spike of time.
This patch introduces an additional check to ignore this condition
since the VF is in reset.
Fixes: 19b73d8efaa4 ("i40evf: Add additional check for reset")
Signed-off-by: Surabhi Boob <[email protected]>
Tested-by: Tony Brelinski <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/iavf/iavf_main.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/intel/iavf/iavf_main.c b/drivers/net/ethernet/intel/iavf/iavf_main.c
index 43c33effd4177..d537d50525e3f 100644
--- a/drivers/net/ethernet/intel/iavf/iavf_main.c
+++ b/drivers/net/ethernet/intel/iavf/iavf_main.c
@@ -2355,7 +2355,7 @@ static void iavf_adminq_task(struct work_struct *work)
/* check for error indications */
val = rd32(hw, hw->aq.arq.len);
- if (val == 0xdeadbeef) /* indicates device in reset */
+ if (val == 0xdeadbeef || val == 0xffffffff) /* device in reset */
goto freedom;
oldval = val;
if (val & IAVF_VF_ARQLEN1_ARQVFE_MASK) {
--
2.33.0
From: Tetsuo Handa <[email protected]>
[ Upstream commit 938cca9e4109b30ee1d476904538225a825e54eb ]
sk_clone_lock() needs to call sock_inuse_add(1) before entering the
sk_free_unlock_clone() error path, for __sk_free() from sk_free() from
sk_free_unlock_clone() calls sock_inuse_add(-1).
Signed-off-by: Tetsuo Handa <[email protected]>
Fixes: 648845ab7e200993 ("sock: Move the socket inuse to namespace.")
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/core/sock.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/net/core/sock.c b/net/core/sock.c
index c1601f75ec4b3..1b31e10181629 100644
--- a/net/core/sock.c
+++ b/net/core/sock.c
@@ -2043,8 +2043,10 @@ struct sock *sk_clone_lock(const struct sock *sk, const gfp_t priority)
newsk->sk_prot_creator = prot;
/* SANITY */
- if (likely(newsk->sk_net_refcnt))
+ if (likely(newsk->sk_net_refcnt)) {
get_net(sock_net(newsk));
+ sock_inuse_add(sock_net(newsk), 1);
+ }
sk_node_init(&newsk->sk_node);
sock_lock_init(newsk);
bh_lock_sock(newsk);
@@ -2115,8 +2117,6 @@ struct sock *sk_clone_lock(const struct sock *sk, const gfp_t priority)
newsk->sk_err_soft = 0;
newsk->sk_priority = 0;
newsk->sk_incoming_cpu = raw_smp_processor_id();
- if (likely(newsk->sk_net_refcnt))
- sock_inuse_add(sock_net(newsk), 1);
/* Before updating sk_refcnt, we must commit prior changes to memory
* (Documentation/RCU/rculist_nulls.rst for details)
--
2.33.0
From: Mitch Williams <[email protected]>
[ Upstream commit 131b0edc4028bb88bb472456b1ddba526cfb7036 ]
In some cases, the ethtool get_rxfh handler may be called with a null
key or indir parameter. So check these pointers, or you will have a very
bad day.
Fixes: 43a3d9ba34c9 ("i40evf: Allow PF driver to configure RSS")
Signed-off-by: Mitch Williams <[email protected]>
Tested-by: Tony Brelinski <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/iavf/iavf_ethtool.c | 13 ++++++-------
1 file changed, 6 insertions(+), 7 deletions(-)
diff --git a/drivers/net/ethernet/intel/iavf/iavf_ethtool.c b/drivers/net/ethernet/intel/iavf/iavf_ethtool.c
index 136c801f5584a..25ee0606e625f 100644
--- a/drivers/net/ethernet/intel/iavf/iavf_ethtool.c
+++ b/drivers/net/ethernet/intel/iavf/iavf_ethtool.c
@@ -1859,14 +1859,13 @@ static int iavf_get_rxfh(struct net_device *netdev, u32 *indir, u8 *key,
if (hfunc)
*hfunc = ETH_RSS_HASH_TOP;
- if (!indir)
- return 0;
-
- memcpy(key, adapter->rss_key, adapter->rss_key_size);
+ if (key)
+ memcpy(key, adapter->rss_key, adapter->rss_key_size);
- /* Each 32 bits pointed by 'indir' is stored with a lut entry */
- for (i = 0; i < adapter->rss_lut_size; i++)
- indir[i] = (u32)adapter->rss_lut[i];
+ if (indir)
+ /* Each 32 bits pointed by 'indir' is stored with a lut entry */
+ for (i = 0; i < adapter->rss_lut_size; i++)
+ indir[i] = (u32)adapter->rss_lut[i];
return 0;
}
--
2.33.0
From: Akeem G Abodunrin <[email protected]>
[ Upstream commit 4293014230b887d94b68aa460ff00153454a3709 ]
Restore VLAN filters after the link is brought down, and up - since all
filters are deleted from HW during the netdev link down routine.
Fixes: ed1f5b58ea01 ("i40evf: remove VLAN filters on close")
Signed-off-by: Akeem G Abodunrin <[email protected]>
Tested-by: George Kuruvinakunnel <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/iavf/iavf.h | 1 +
drivers/net/ethernet/intel/iavf/iavf_main.c | 35 ++++++++++++++++++---
2 files changed, 31 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ethernet/intel/iavf/iavf.h b/drivers/net/ethernet/intel/iavf/iavf.h
index 68c80f04113c8..46312a4415baf 100644
--- a/drivers/net/ethernet/intel/iavf/iavf.h
+++ b/drivers/net/ethernet/intel/iavf/iavf.h
@@ -39,6 +39,7 @@
#include "iavf_txrx.h"
#include "iavf_fdir.h"
#include "iavf_adv_rss.h"
+#include <linux/bitmap.h>
#define DEFAULT_DEBUG_LEVEL_SHIFT 3
#define PFX "iavf: "
diff --git a/drivers/net/ethernet/intel/iavf/iavf_main.c b/drivers/net/ethernet/intel/iavf/iavf_main.c
index d537d50525e3f..aaf8a2f396e46 100644
--- a/drivers/net/ethernet/intel/iavf/iavf_main.c
+++ b/drivers/net/ethernet/intel/iavf/iavf_main.c
@@ -687,6 +687,23 @@ static void iavf_del_vlan(struct iavf_adapter *adapter, u16 vlan)
spin_unlock_bh(&adapter->mac_vlan_list_lock);
}
+/**
+ * iavf_restore_filters
+ * @adapter: board private structure
+ *
+ * Restore existing non MAC filters when VF netdev comes back up
+ **/
+static void iavf_restore_filters(struct iavf_adapter *adapter)
+{
+ /* re-add all VLAN filters */
+ if (VLAN_ALLOWED(adapter)) {
+ u16 vid;
+
+ for_each_set_bit(vid, adapter->vsi.active_vlans, VLAN_N_VID)
+ iavf_add_vlan(adapter, vid);
+ }
+}
+
/**
* iavf_vlan_rx_add_vid - Add a VLAN filter to a device
* @netdev: network device struct
@@ -700,8 +717,11 @@ static int iavf_vlan_rx_add_vid(struct net_device *netdev,
if (!VLAN_ALLOWED(adapter))
return -EIO;
+
if (iavf_add_vlan(adapter, vid) == NULL)
return -ENOMEM;
+
+ set_bit(vid, adapter->vsi.active_vlans);
return 0;
}
@@ -716,11 +736,13 @@ static int iavf_vlan_rx_kill_vid(struct net_device *netdev,
{
struct iavf_adapter *adapter = netdev_priv(netdev);
- if (VLAN_ALLOWED(adapter)) {
- iavf_del_vlan(adapter, vid);
- return 0;
- }
- return -EIO;
+ if (!VLAN_ALLOWED(adapter))
+ return -EIO;
+
+ iavf_del_vlan(adapter, vid);
+ clear_bit(vid, adapter->vsi.active_vlans);
+
+ return 0;
}
/**
@@ -3248,6 +3270,9 @@ static int iavf_open(struct net_device *netdev)
spin_unlock_bh(&adapter->mac_vlan_list_lock);
+ /* Restore VLAN filters that were removed with IFF_DOWN */
+ iavf_restore_filters(adapter);
+
iavf_configure(adapter);
iavf_up_complete(adapter);
--
2.33.0
From: Randy Dunlap <[email protected]>
[ Upstream commit e8f67482e5a4bc8d0b65d606d08cb60ee123b468 ]
BCM63XX selects HAVE_LEGACY_CLK but does not provide/support
clk_get_parent(), so add a simple implementation of that
function so that callers of it will build without errors.
Fixes these build errors:
mips-linux-ld: drivers/iio/adc/ingenic-adc.o: in function `jz4770_adc_init_clk_div':
ingenic-adc.c:(.text+0xe4): undefined reference to `clk_get_parent'
mips-linux-ld: drivers/iio/adc/ingenic-adc.o: in function `jz4725b_adc_init_clk_div':
ingenic-adc.c:(.text+0x1b8): undefined reference to `clk_get_parent'
Fixes: e7300d04bd08 ("MIPS: BCM63xx: Add support for the Broadcom BCM63xx family of SOCs." )
Signed-off-by: Randy Dunlap <[email protected]>
Reported-by: kernel test robot <[email protected]>
Suggested-by: Russell King (Oracle) <[email protected]>
Cc: Artur Rojek <[email protected]>
Cc: Paul Cercueil <[email protected]>
Cc: [email protected]
Cc: Jonathan Cameron <[email protected]>
Cc: Lars-Peter Clausen <[email protected]>
Cc: [email protected]
Cc: Florian Fainelli <[email protected]>
Cc: Andy Shevchenko <[email protected]>
Cc: Russell King <[email protected]>
Cc: [email protected]
Cc: Jonas Gorski <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Acked-by: Jonathan Cameron <[email protected]>
Acked-by: Russell King (Oracle) <[email protected]>
Acked-by: Florian Fainelli <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/mips/bcm63xx/clk.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/mips/bcm63xx/clk.c b/arch/mips/bcm63xx/clk.c
index 5a3e325275d0d..1c91064cb448b 100644
--- a/arch/mips/bcm63xx/clk.c
+++ b/arch/mips/bcm63xx/clk.c
@@ -381,6 +381,12 @@ void clk_disable(struct clk *clk)
EXPORT_SYMBOL(clk_disable);
+struct clk *clk_get_parent(struct clk *clk)
+{
+ return NULL;
+}
+EXPORT_SYMBOL(clk_get_parent);
+
unsigned long clk_get_rate(struct clk *clk)
{
if (!clk)
--
2.33.0
From: Randy Dunlap <[email protected]>
[ Upstream commit fc1aabb088860d6cf9dd03612b7a6f0de91ccac2 ]
Provide a simple implementation of clk_get_parent() in the
lantiq subarch so that callers of it will build without errors.
Fixes this build error:
ERROR: modpost: "clk_get_parent" [drivers/iio/adc/ingenic-adc.ko] undefined!
Fixes: 171bb2f19ed6 ("MIPS: Lantiq: Add initial support for Lantiq SoCs")
Signed-off-by: Randy Dunlap <[email protected]>
Suggested-by: Russell King (Oracle) <[email protected]>
Cc: [email protected]
Cc: John Crispin <[email protected]>
Cc: Thomas Bogendoerfer <[email protected]>
Cc: Jonathan Cameron <[email protected]>
Cc: [email protected]
Cc: Russell King <[email protected]>
Cc: Andy Shevchenko <[email protected]>
Acked-by: Jonathan Cameron <[email protected]>
Acked-by: John Crispin <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/mips/lantiq/clk.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/mips/lantiq/clk.c b/arch/mips/lantiq/clk.c
index dd819e31fcbbf..4916cccf378fd 100644
--- a/arch/mips/lantiq/clk.c
+++ b/arch/mips/lantiq/clk.c
@@ -158,6 +158,12 @@ void clk_deactivate(struct clk *clk)
}
EXPORT_SYMBOL(clk_deactivate);
+struct clk *clk_get_parent(struct clk *clk)
+{
+ return NULL;
+}
+EXPORT_SYMBOL(clk_get_parent);
+
static inline u32 get_counter_resolution(void)
{
u32 res;
--
2.33.0
From: Wen Gu <[email protected]>
[ Upstream commit cf4f5530bb55ef7d5a91036b26676643b80b1616 ]
The link_id is supposed to be unique, but smcr_next_link_id() doesn't
skip the used link_id as expected. So the patch fixes this.
Fixes: 026c381fb477 ("net/smc: introduce link_idx for link group array")
Signed-off-by: Wen Gu <[email protected]>
Reviewed-by: Tony Lu <[email protected]>
Acked-by: Karsten Graul <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/smc/smc_core.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/net/smc/smc_core.c b/net/smc/smc_core.c
index d2206743dc714..d672c0f0e247f 100644
--- a/net/smc/smc_core.c
+++ b/net/smc/smc_core.c
@@ -665,13 +665,14 @@ static u8 smcr_next_link_id(struct smc_link_group *lgr)
int i;
while (1) {
+again:
link_id = ++lgr->next_link_id;
if (!link_id) /* skip zero as link_id */
link_id = ++lgr->next_link_id;
for (i = 0; i < SMC_LINKS_PER_LGR_MAX; i++) {
if (smc_link_usable(&lgr->lnk[i]) &&
lgr->lnk[i].link_id == link_id)
- continue;
+ goto again;
}
break;
}
--
2.33.0
From: Cong Wang <[email protected]>
[ Upstream commit 099f896f498a2b26d84f4ddae039b2c542c18b48 ]
It turns out the skb's in sock receive queue could have bad checksums, as
both ->poll() and ->recvmsg() validate checksums. We have to do the same
for ->read_sock() path too before they are redirected in sockmap.
Fixes: d7f571188ecf ("udp: Implement ->read_sock() for sockmap")
Reported-by: Daniel Borkmann <[email protected]>
Signed-off-by: Cong Wang <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: John Fastabend <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
net/ipv4/udp.c | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c
index 2fffcf2b54f3f..2ce3fca545d37 100644
--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -1808,6 +1808,17 @@ int udp_read_sock(struct sock *sk, read_descriptor_t *desc,
skb = skb_recv_udp(sk, 0, 1, &err);
if (!skb)
return err;
+
+ if (udp_lib_checksum_complete(skb)) {
+ __UDP_INC_STATS(sock_net(sk), UDP_MIB_CSUMERRORS,
+ IS_UDPLITE(sk));
+ __UDP_INC_STATS(sock_net(sk), UDP_MIB_INERRORS,
+ IS_UDPLITE(sk));
+ atomic_inc(&sk->sk_drops);
+ kfree_skb(skb);
+ continue;
+ }
+
used = recv_actor(desc, skb, 0, skb->len);
if (used <= 0) {
if (!copied)
--
2.33.0
From: Alex Williamson <[email protected]>
[ Upstream commit 812fcc609502096e98cc3918a4b807722dba8fd9 ]
A Lenovo ThinkStation S20 (4157CTO BIOS 60KT41AUS) fails to boot on
recent kernels including the think-lmi driver, due to the fact that
errors returned by the tlmi_analyze() function are ignored by
tlmi_probe(), where tlmi_sysfs_init() is called unconditionally.
This results in making use of an array of already freed, non-null
pointers and other uninitialized globals, causing all sorts of nasty
kobject and memory faults.
Make use of the analyze function return value, free a couple leaked
allocations, and remove the settings_count field, which is incremented
but never consumed.
Fixes: a40cd7ef22fb ("platform/x86: think-lmi: Add WMI interface support on Lenovo platforms")
Signed-off-by: Alex Williamson <[email protected]>
Reviewed-by: Mark Gross <[email protected]>
Reviewed-by: Mark Pearson <[email protected]>
Link: https://lore.kernel.org/r/163639463588.1330483.15850167112490200219.stgit@omen
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/platform/x86/think-lmi.c | 13 ++++++++++---
drivers/platform/x86/think-lmi.h | 1 -
2 files changed, 10 insertions(+), 4 deletions(-)
diff --git a/drivers/platform/x86/think-lmi.c b/drivers/platform/x86/think-lmi.c
index 9472aae72df29..c4d9c45350f7c 100644
--- a/drivers/platform/x86/think-lmi.c
+++ b/drivers/platform/x86/think-lmi.c
@@ -888,8 +888,10 @@ static int tlmi_analyze(void)
break;
if (!item)
break;
- if (!*item)
+ if (!*item) {
+ kfree(item);
continue;
+ }
/* It is not allowed to have '/' for file name. Convert it into '\'. */
strreplace(item, '/', '\\');
@@ -902,6 +904,7 @@ static int tlmi_analyze(void)
setting = kzalloc(sizeof(*setting), GFP_KERNEL);
if (!setting) {
ret = -ENOMEM;
+ kfree(item);
goto fail_clear_attr;
}
setting->index = i;
@@ -916,7 +919,6 @@ static int tlmi_analyze(void)
}
kobject_init(&setting->kobj, &tlmi_attr_setting_ktype);
tlmi_priv.setting[i] = setting;
- tlmi_priv.settings_count++;
kfree(item);
}
@@ -983,7 +985,12 @@ static void tlmi_remove(struct wmi_device *wdev)
static int tlmi_probe(struct wmi_device *wdev, const void *context)
{
- tlmi_analyze();
+ int ret;
+
+ ret = tlmi_analyze();
+ if (ret)
+ return ret;
+
return tlmi_sysfs_init();
}
diff --git a/drivers/platform/x86/think-lmi.h b/drivers/platform/x86/think-lmi.h
index f8e26823075fd..2ce5086a5af27 100644
--- a/drivers/platform/x86/think-lmi.h
+++ b/drivers/platform/x86/think-lmi.h
@@ -55,7 +55,6 @@ struct tlmi_attr_setting {
struct think_lmi {
struct wmi_device *wmi_device;
- int settings_count;
bool can_set_bios_settings;
bool can_get_bios_selections;
bool can_set_bios_password;
--
2.33.0
From: Johannes Berg <[email protected]>
[ Upstream commit ce6b69749961426c6d822215ded9e67154e1ad4f ]
Even if userspace specifies the NL80211_ATTR_SURVEY_RADIO_STATS
attribute, we cannot get the statistics because we're not really
parsing the incoming attributes properly any more.
Fix this by passing the attrbuf to nl80211_prepare_wdev_dump()
and filling it there, if given, and using a local version only
if no output is desired.
Since I'm touching it anyway, make nl80211_prepare_wdev_dump()
static.
Fixes: 50508d941c18 ("cfg80211: use parallel_ops for genl")
Reported-by: Jan Fuchs <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
Tested-by: Sven Eckelmann <[email protected]>
Link: https://lore.kernel.org/r/20211029092539.2851b4799386.If9736d4575ee79420cbec1bd930181e1d53c7317@changeid
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/wireless/nl80211.c | 34 +++++++++++++++++++---------------
net/wireless/nl80211.h | 6 +-----
2 files changed, 20 insertions(+), 20 deletions(-)
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index bf7cd47525472..16b3d0cc0bdb0 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -922,33 +922,37 @@ nl80211_packet_pattern_policy[MAX_NL80211_PKTPAT + 1] = {
[NL80211_PKTPAT_OFFSET] = { .type = NLA_U32 },
};
-int nl80211_prepare_wdev_dump(struct netlink_callback *cb,
- struct cfg80211_registered_device **rdev,
- struct wireless_dev **wdev)
+static int nl80211_prepare_wdev_dump(struct netlink_callback *cb,
+ struct cfg80211_registered_device **rdev,
+ struct wireless_dev **wdev,
+ struct nlattr **attrbuf)
{
int err;
if (!cb->args[0]) {
- struct nlattr **attrbuf;
+ struct nlattr **attrbuf_free = NULL;
- attrbuf = kcalloc(NUM_NL80211_ATTR, sizeof(*attrbuf),
- GFP_KERNEL);
- if (!attrbuf)
- return -ENOMEM;
+ if (!attrbuf) {
+ attrbuf = kcalloc(NUM_NL80211_ATTR, sizeof(*attrbuf),
+ GFP_KERNEL);
+ if (!attrbuf)
+ return -ENOMEM;
+ attrbuf_free = attrbuf;
+ }
err = nlmsg_parse_deprecated(cb->nlh,
GENL_HDRLEN + nl80211_fam.hdrsize,
attrbuf, nl80211_fam.maxattr,
nl80211_policy, NULL);
if (err) {
- kfree(attrbuf);
+ kfree(attrbuf_free);
return err;
}
rtnl_lock();
*wdev = __cfg80211_wdev_from_attrs(NULL, sock_net(cb->skb->sk),
attrbuf);
- kfree(attrbuf);
+ kfree(attrbuf_free);
if (IS_ERR(*wdev)) {
rtnl_unlock();
return PTR_ERR(*wdev);
@@ -6001,7 +6005,7 @@ static int nl80211_dump_station(struct sk_buff *skb,
int sta_idx = cb->args[2];
int err;
- err = nl80211_prepare_wdev_dump(cb, &rdev, &wdev);
+ err = nl80211_prepare_wdev_dump(cb, &rdev, &wdev, NULL);
if (err)
return err;
/* nl80211_prepare_wdev_dump acquired it in the successful case */
@@ -6896,7 +6900,7 @@ static int nl80211_dump_mpath(struct sk_buff *skb,
int path_idx = cb->args[2];
int err;
- err = nl80211_prepare_wdev_dump(cb, &rdev, &wdev);
+ err = nl80211_prepare_wdev_dump(cb, &rdev, &wdev, NULL);
if (err)
return err;
/* nl80211_prepare_wdev_dump acquired it in the successful case */
@@ -7096,7 +7100,7 @@ static int nl80211_dump_mpp(struct sk_buff *skb,
int path_idx = cb->args[2];
int err;
- err = nl80211_prepare_wdev_dump(cb, &rdev, &wdev);
+ err = nl80211_prepare_wdev_dump(cb, &rdev, &wdev, NULL);
if (err)
return err;
/* nl80211_prepare_wdev_dump acquired it in the successful case */
@@ -9518,7 +9522,7 @@ static int nl80211_dump_scan(struct sk_buff *skb, struct netlink_callback *cb)
int start = cb->args[2], idx = 0;
int err;
- err = nl80211_prepare_wdev_dump(cb, &rdev, &wdev);
+ err = nl80211_prepare_wdev_dump(cb, &rdev, &wdev, NULL);
if (err)
return err;
/* nl80211_prepare_wdev_dump acquired it in the successful case */
@@ -9651,7 +9655,7 @@ static int nl80211_dump_survey(struct sk_buff *skb, struct netlink_callback *cb)
if (!attrbuf)
return -ENOMEM;
- res = nl80211_prepare_wdev_dump(cb, &rdev, &wdev);
+ res = nl80211_prepare_wdev_dump(cb, &rdev, &wdev, attrbuf);
if (res) {
kfree(attrbuf);
return res;
diff --git a/net/wireless/nl80211.h b/net/wireless/nl80211.h
index a3f387770f1bf..d642e3be4ee78 100644
--- a/net/wireless/nl80211.h
+++ b/net/wireless/nl80211.h
@@ -1,7 +1,7 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Portions of this file
- * Copyright (C) 2018, 2020 Intel Corporation
+ * Copyright (C) 2018, 2020-2021 Intel Corporation
*/
#ifndef __NET_WIRELESS_NL80211_H
#define __NET_WIRELESS_NL80211_H
@@ -22,10 +22,6 @@ static inline u64 wdev_id(struct wireless_dev *wdev)
((u64)wiphy_to_rdev(wdev->wiphy)->wiphy_idx << 32);
}
-int nl80211_prepare_wdev_dump(struct netlink_callback *cb,
- struct cfg80211_registered_device **rdev,
- struct wireless_dev **wdev);
-
int nl80211_parse_chandef(struct cfg80211_registered_device *rdev,
struct genl_info *info,
struct cfg80211_chan_def *chandef);
--
2.33.0
From: Konrad Dybcio <[email protected]>
[ Upstream commit 27df68d579c67ef6c39a5047559b6a7c08c96219 ]
The source group count was mistakenly assigned to both dst and src loops.
Fix it to make IPA probe and work again.
Fixes: 4fd704b3608a ("net: ipa: record number of groups in data")
Acked-by: AngeloGioacchino Del Regno <[email protected]>
Reviewed-by: Marijn Suijten <[email protected]>
Signed-off-by: Konrad Dybcio <[email protected]>
Reviewed-by: Alex Elder <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ipa/ipa_resource.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ipa/ipa_resource.c b/drivers/net/ipa/ipa_resource.c
index e3da95d694099..06cec71993823 100644
--- a/drivers/net/ipa/ipa_resource.c
+++ b/drivers/net/ipa/ipa_resource.c
@@ -52,7 +52,7 @@ static bool ipa_resource_limits_valid(struct ipa *ipa,
return false;
}
- group_count = data->rsrc_group_src_count;
+ group_count = data->rsrc_group_dst_count;
if (!group_count || group_count > IPA_RESOURCE_GROUP_MAX)
return false;
--
2.33.0
From: Kumar Kartikeya Dwivedi <[email protected]>
[ Upstream commit 2453afe3845523d9dfe89dbfb3d71abfa095e260 ]
Commit b599015f044d ("samples/bpf: Fix application of sizeof to pointer")
tried to fix a bug where sizeof was incorrectly applied to a pointer instead
of the array string was being copied to, to find the destination buffer size,
but ended up using strlen, which is still incorrect. However, on closer look
ifname_buf has no other use, hence directly use optarg.
Fixes: b599015f044d ("samples/bpf: Fix application of sizeof to pointer")
Fixes: e531a220cc59 ("samples: bpf: Convert xdp_redirect_cpu to XDP samples helper")
Signed-off-by: Kumar Kartikeya Dwivedi <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Reviewed-by: Alexander Lobakin <[email protected]>
Tested-by: Alexander Lobakin <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
samples/bpf/xdp_redirect_cpu_user.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/samples/bpf/xdp_redirect_cpu_user.c b/samples/bpf/xdp_redirect_cpu_user.c
index d84e6949007cc..a81704d3317ba 100644
--- a/samples/bpf/xdp_redirect_cpu_user.c
+++ b/samples/bpf/xdp_redirect_cpu_user.c
@@ -309,7 +309,6 @@ int main(int argc, char **argv)
const char *mprog_filename = NULL, *mprog_name = NULL;
struct xdp_redirect_cpu *skel;
struct bpf_map_info info = {};
- char ifname_buf[IF_NAMESIZE];
struct bpf_cpumap_val value;
__u32 infosz = sizeof(info);
int ret = EXIT_FAIL_OPTION;
@@ -390,10 +389,10 @@ int main(int argc, char **argv)
case 'd':
if (strlen(optarg) >= IF_NAMESIZE) {
fprintf(stderr, "-d/--dev name too long\n");
+ usage(argv, long_options, __doc__, mask, true, skel->obj);
goto end_cpu;
}
- safe_strncpy(ifname_buf, optarg, strlen(ifname_buf));
- ifindex = if_nametoindex(ifname_buf);
+ ifindex = if_nametoindex(optarg);
if (!ifindex)
ifindex = strtoul(optarg, NULL, 0);
if (!ifindex) {
--
2.33.0
From: Arjun Roy <[email protected]>
[ Upstream commit 70701b83e208767f2720d8cd3e6a62cddafb3a30 ]
TCP Receive zerocopy iterates through the SKB queue via
tcp_recv_skb(), acquiring a pointer to an SKB and an offset within
that SKB to read from. From there, it iterates the SKB frags array to
determine which offset to start remapping pages from.
However, this is built on the assumption that the offset read so far
within the SKB is smaller than the SKB length. If this assumption is
violated, we can attempt to read an invalid frags array element, which
would cause a fault.
tcp_recv_skb() can cause such an SKB to be returned when the TCP FIN
flag is set. Therefore, we must guard against this occurrence inside
skb_advance_frag().
One way that we can reproduce this error follows:
1) In a receiver program, call getsockopt(TCP_ZEROCOPY_RECEIVE) with:
char some_array[32 * 1024];
struct tcp_zerocopy_receive zc = {
.copybuf_address = (__u64) &some_array[0],
.copybuf_len = 32 * 1024,
};
2) In a sender program, after a TCP handshake, send the following
sequence of packets:
i) Seq = [X, X+4000]
ii) Seq = [X+4000, X+5000]
iii) Seq = [X+4000, X+5000], Flags = FIN | URG, urgptr=1000
(This can happen without URG, if we have a signal pending, but URG is
a convenient way to reproduce the behaviour).
In this case, the following event sequence will occur on the receiver:
tcp_zerocopy_receive():
-> receive_fallback_to_copy() // copybuf_len >= inq
-> tcp_recvmsg_locked() // reads 5000 bytes, then breaks due to URG
-> tcp_recv_skb() // yields skb with skb->len == offset
-> tcp_zerocopy_set_hint_for_skb()
-> skb_advance_to_frag() // will returns a frags ptr. >= nr_frags
-> find_next_mappable_frag() // will dereference this bad frags ptr.
With this patch, skb_advance_to_frag() will no longer return an
invalid frags pointer, and will return NULL instead, fixing the issue.
Signed-off-by: Arjun Roy <[email protected]>
Signed-off-by: Eric Dumazet <[email protected]>
Fixes: 05255b823a61 ("tcp: add TCP_ZEROCOPY_RECEIVE support for zerocopy receive")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/ipv4/tcp.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index 8affba5909bdf..844c6e5a82891 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -1776,6 +1776,9 @@ static skb_frag_t *skb_advance_to_frag(struct sk_buff *skb, u32 offset_skb,
{
skb_frag_t *frag;
+ if (unlikely(offset_skb >= skb->len))
+ return NULL;
+
offset_skb -= skb_headlen(skb);
if ((int)offset_skb < 0 || skb_has_frag_list(skb))
return NULL;
--
2.33.0
From: Chao Yu <[email protected]>
[ Upstream commit ca98d72141dd81f42893a9a43d7ededab3355fba ]
As Pavel Machek reported in [1]
This code looks quite confused: part of function returns 1 on
corruption, part returns -errno. The problem is not stable-specific.
[1] https://lkml.org/lkml/2021/9/19/207
Let's fix to make 'insane cp_payload case' to return 1 rater than
EFSCORRUPTED, so that return value can be kept consistent for all
error cases, it can avoid confusion of code logic.
Fixes: 65ddf6564843 ("f2fs: fix to do sanity check for sb/cp fields correctly")
Reported-by: Pavel Machek <[email protected]>
Reviewed-by: Pavel Machek <[email protected]>
Signed-off-by: Chao Yu <[email protected]>
Signed-off-by: Jaegeuk Kim <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/f2fs/super.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/f2fs/super.c b/fs/f2fs/super.c
index 4d24146b4f471..8795a5a8d4e89 100644
--- a/fs/f2fs/super.c
+++ b/fs/f2fs/super.c
@@ -3487,7 +3487,7 @@ skip_cross:
NR_CURSEG_PERSIST_TYPE + nat_bits_blocks >= blocks_per_seg)) {
f2fs_warn(sbi, "Insane cp_payload: %u, nat_bits_blocks: %u)",
cp_payload, nat_bits_blocks);
- return -EFSCORRUPTED;
+ return 1;
}
if (unlikely(f2fs_cp_error(sbi))) {
--
2.33.0
From: Joel Stanley <[email protected]>
[ Upstream commit f45c5b1c27293f834682e89003f88b3512329ab4 ]
Move the soc revision parsing to the initial probe, saving the driver
from parsing the register multiple times.
Use this variable to select the correct divisor table for the AHB clock.
Before this fix the A2 would have used the A0 table.
Fixes: 2d491066ccd4 ("clk: ast2600: Fix AHB clock divider for A1")
Signed-off-by: Joel Stanley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Andrew Jeffery <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/clk/clk-ast2600.c | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
diff --git a/drivers/clk/clk-ast2600.c b/drivers/clk/clk-ast2600.c
index bc3be5f3eae15..24dab2312bc6f 100644
--- a/drivers/clk/clk-ast2600.c
+++ b/drivers/clk/clk-ast2600.c
@@ -51,6 +51,8 @@ static DEFINE_SPINLOCK(aspeed_g6_clk_lock);
static struct clk_hw_onecell_data *aspeed_g6_clk_data;
static void __iomem *scu_g6_base;
+/* AST2600 revision: A0, A1, A2, etc */
+static u8 soc_rev;
/*
* Clocks marked with CLK_IS_CRITICAL:
@@ -191,9 +193,8 @@ static struct clk_hw *ast2600_calc_pll(const char *name, u32 val)
static struct clk_hw *ast2600_calc_apll(const char *name, u32 val)
{
unsigned int mult, div;
- u32 chip_id = readl(scu_g6_base + ASPEED_G6_SILICON_REV);
- if (((chip_id & CHIP_REVISION_ID) >> 16) >= 2) {
+ if (soc_rev >= 2) {
if (val & BIT(24)) {
/* Pass through mode */
mult = div = 1;
@@ -707,7 +708,7 @@ static const u32 ast2600_a1_axi_ahb200_tbl[] = {
static void __init aspeed_g6_cc(struct regmap *map)
{
struct clk_hw *hw;
- u32 val, div, divbits, chip_id, axi_div, ahb_div;
+ u32 val, div, divbits, axi_div, ahb_div;
clk_hw_register_fixed_rate(NULL, "clkin", NULL, 0, 25000000);
@@ -738,8 +739,7 @@ static void __init aspeed_g6_cc(struct regmap *map)
axi_div = 2;
divbits = (val >> 11) & 0x3;
- regmap_read(map, ASPEED_G6_SILICON_REV, &chip_id);
- if (chip_id & BIT(16)) {
+ if (soc_rev >= 1) {
if (!divbits) {
ahb_div = ast2600_a1_axi_ahb200_tbl[(val >> 8) & 0x3];
if (val & BIT(16))
@@ -784,6 +784,8 @@ static void __init aspeed_g6_cc_init(struct device_node *np)
if (!scu_g6_base)
return;
+ soc_rev = (readl(scu_g6_base + ASPEED_G6_SILICON_REV) & CHIP_REVISION_ID) >> 16;
+
aspeed_g6_clk_data = kzalloc(struct_size(aspeed_g6_clk_data, hws,
ASPEED_G6_NUM_CLKS), GFP_KERNEL);
if (!aspeed_g6_clk_data)
--
2.33.0
From: Alexander Lobakin <[email protected]>
[ Upstream commit dc14ca4644f48b1cfa93631e35c28bdc011ad109 ]
sample_summary_print() uses accumulated period to calculate and display
per-sec averages. This period gets incremented by sampling interval each
time a new sample is formed, and thus equals to the number of samples
collected multiplied by this interval.
However, the totals are being calculated differently, they receive current
sample statistics already divided by the interval gotten as a difference
between sample timestamps for better precision -- in other words, they are
being incremented by the per-sec values each sample.
This leads to the excessive division of summary per-secs when interval != 1
sec. It is obvious pps couldn't become two times lower just from picking a
different sampling interval value:
$ samples/bpf/xdp_redirect_cpu -p xdp_prognum_n1_inverse_qnum -c all
-s -d 6 -i 1
< snip >
Packets received : 2,197,230,321
Average packets/s : 22,887,816
Packets redirected : 2,197,230,472
Average redir/s : 22,887,817
$ samples/bpf/xdp_redirect_cpu -p xdp_prognum_n1_inverse_qnum -c all
-s -d 6 -i 2
< snip >
Packets received : 159,566,498
Average packets/s : 11,397,607
Packets redirected : 159,566,995
Average redir/s : 11,397,642
This can be easily fixed by treating the divisor not as a period, but rather
as a total number of samples, and thus incrementing it by 1 instead of
interval. As a nice side effect, we can now remove so-named argument from a
couple of functions. Let us also create an "alias" for sample_output::rx_cnt::pps
named 'num' using a union since this field is used to store this number (period
previously) as well, and the resulting counter-intuitive code might've been a
reason for this bug.
Fixes: 156f886cf697 ("samples: bpf: Add basic infrastructure for XDP samples")
Signed-off-by: Alexander Lobakin <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Reviewed-by: Jesse Brandeburg <[email protected]>
Reviewed-by: Kumar Kartikeya Dwivedi <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
samples/bpf/xdp_sample_user.c | 28 +++++++++++++++-------------
1 file changed, 15 insertions(+), 13 deletions(-)
diff --git a/samples/bpf/xdp_sample_user.c b/samples/bpf/xdp_sample_user.c
index b32d821781990..8740838e77679 100644
--- a/samples/bpf/xdp_sample_user.c
+++ b/samples/bpf/xdp_sample_user.c
@@ -120,7 +120,10 @@ struct sample_output {
__u64 xmit;
} totals;
struct {
- __u64 pps;
+ union {
+ __u64 pps;
+ __u64 num;
+ };
__u64 drop;
__u64 err;
} rx_cnt;
@@ -1322,7 +1325,7 @@ int sample_install_xdp(struct bpf_program *xdp_prog, int ifindex, bool generic,
static void sample_summary_print(void)
{
- double period = sample_out.rx_cnt.pps;
+ double num = sample_out.rx_cnt.num;
if (sample_out.totals.rx) {
double pkts = sample_out.totals.rx;
@@ -1330,7 +1333,7 @@ static void sample_summary_print(void)
print_always(" Packets received : %'-10llu\n",
sample_out.totals.rx);
print_always(" Average packets/s : %'-10.0f\n",
- sample_round(pkts / period));
+ sample_round(pkts / num));
}
if (sample_out.totals.redir) {
double pkts = sample_out.totals.redir;
@@ -1338,7 +1341,7 @@ static void sample_summary_print(void)
print_always(" Packets redirected : %'-10llu\n",
sample_out.totals.redir);
print_always(" Average redir/s : %'-10.0f\n",
- sample_round(pkts / period));
+ sample_round(pkts / num));
}
if (sample_out.totals.drop)
print_always(" Rx dropped : %'-10llu\n",
@@ -1355,7 +1358,7 @@ static void sample_summary_print(void)
print_always(" Packets transmitted : %'-10llu\n",
sample_out.totals.xmit);
print_always(" Average transmit/s : %'-10.0f\n",
- sample_round(pkts / period));
+ sample_round(pkts / num));
}
}
@@ -1422,7 +1425,7 @@ static int sample_stats_collect(struct stats_record *rec)
return 0;
}
-static void sample_summary_update(struct sample_output *out, int interval)
+static void sample_summary_update(struct sample_output *out)
{
sample_out.totals.rx += out->totals.rx;
sample_out.totals.redir += out->totals.redir;
@@ -1430,12 +1433,11 @@ static void sample_summary_update(struct sample_output *out, int interval)
sample_out.totals.drop_xmit += out->totals.drop_xmit;
sample_out.totals.err += out->totals.err;
sample_out.totals.xmit += out->totals.xmit;
- sample_out.rx_cnt.pps += interval;
+ sample_out.rx_cnt.num++;
}
static void sample_stats_print(int mask, struct stats_record *cur,
- struct stats_record *prev, char *prog_name,
- int interval)
+ struct stats_record *prev, char *prog_name)
{
struct sample_output out = {};
@@ -1452,7 +1454,7 @@ static void sample_stats_print(int mask, struct stats_record *cur,
else if (mask & SAMPLE_DEVMAP_XMIT_CNT_MULTI)
stats_get_devmap_xmit_multi(cur, prev, 0, &out,
mask & SAMPLE_DEVMAP_XMIT_CNT);
- sample_summary_update(&out, interval);
+ sample_summary_update(&out);
stats_print(prog_name, mask, cur, prev, &out);
}
@@ -1495,7 +1497,7 @@ static void swap(struct stats_record **a, struct stats_record **b)
}
static int sample_timer_cb(int timerfd, struct stats_record **rec,
- struct stats_record **prev, int interval)
+ struct stats_record **prev)
{
char line[64] = "Summary";
int ret;
@@ -1524,7 +1526,7 @@ static int sample_timer_cb(int timerfd, struct stats_record **rec,
snprintf(line, sizeof(line), "%s->%s", f ?: "?", t ?: "?");
}
- sample_stats_print(sample_mask, *rec, *prev, line, interval);
+ sample_stats_print(sample_mask, *rec, *prev, line);
return 0;
}
@@ -1579,7 +1581,7 @@ int sample_run(int interval, void (*post_cb)(void *), void *ctx)
if (pfd[0].revents & POLLIN)
ret = sample_signal_cb();
else if (pfd[1].revents & POLLIN)
- ret = sample_timer_cb(timerfd, &rec, &prev, interval);
+ ret = sample_timer_cb(timerfd, &rec, &prev);
if (ret)
break;
--
2.33.0
From: Alexei Starovoitov <[email protected]>
[ Upstream commit 34d11a440c6167133201b7374065b59f259730d7 ]
Introduction of map_uid made two lookups from outer map to be distinct.
That distinction is only necessary when inner map has an embedded timer.
Otherwise it will make the verifier state pruning to be conservative
which will cause complex programs to hit 1M insn_processed limit.
Tighten map_uid logic to apply to inner maps with timers only.
Fixes: 3e8ce29850f1 ("bpf: Prevent pointer mismatch in bpf_timer_init.")
Reported-by: Lorenz Bauer <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Tested-by: Lorenz Bauer <[email protected]>
Link: https://lore.kernel.org/bpf/CACAyw99hVEJFoiBH_ZGyy=+oO-jyydoz6v1DeKPKs2HVsUH28w@mail.gmail.com
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/bpf/verifier.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c
index ddba80554fef3..cba37d83451eb 100644
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -1143,7 +1143,8 @@ static void mark_ptr_not_null_reg(struct bpf_reg_state *reg)
/* transfer reg's id which is unique for every map_lookup_elem
* as UID of the inner map.
*/
- reg->map_uid = reg->id;
+ if (map_value_has_timer(map->inner_map_meta))
+ reg->map_uid = reg->id;
} else if (map->map_type == BPF_MAP_TYPE_XSKMAP) {
reg->type = PTR_TO_XDP_SOCK;
} else if (map->map_type == BPF_MAP_TYPE_SOCKMAP ||
--
2.33.0
From: Colin Ian King <[email protected]>
[ Upstream commit d08e38b62327961295be1c63b562cd46ec97cd07 ]
The bitfields have_csum and io_error are currently signed which is not
recommended as the representation is an implementation defined
behaviour. Fix this by making the bit-fields unsigned ints.
Fixes: 2c36395430b0 ("btrfs: scrub: remove the anonymous structure from scrub_page")
Reviewed-by: Josef Bacik <[email protected]>
Reviewed-by: Qu Wenruo <[email protected]>
Signed-off-by: Colin Ian King <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/btrfs/scrub.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/fs/btrfs/scrub.c b/fs/btrfs/scrub.c
index 088641ba7a8e6..62f4bafbe54bb 100644
--- a/fs/btrfs/scrub.c
+++ b/fs/btrfs/scrub.c
@@ -73,8 +73,8 @@ struct scrub_page {
u64 physical_for_dev_replace;
atomic_t refs;
u8 mirror_num;
- int have_csum:1;
- int io_error:1;
+ unsigned int have_csum:1;
+ unsigned int io_error:1;
u8 csum[BTRFS_CSUM_SIZE];
struct scrub_recover *recover;
--
2.33.0
From: Leon Romanovsky <[email protected]>
[ Upstream commit 6cd7397d01c4a3e09757840299e4f114f0aa5fa0 ]
Preset both receive and send CQ pointers prior to call to the drivers and
overwrite it later again till the mlx4 is going to be changed do not
overwrite ibqp properties.
This change is needed for mlx5, because in case of QP creation failure, it
will go to the path of QP destroy which relies on proper CQ pointers.
BUG: KASAN: use-after-free in create_qp.cold+0x164/0x16e [mlx5_ib]
Write of size 8 at addr ffff8880064c55c0 by task a.out/246
CPU: 0 PID: 246 Comm: a.out Not tainted 5.15.0+ #291
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Call Trace:
dump_stack_lvl+0x45/0x59
print_address_description.constprop.0+0x1f/0x140
kasan_report.cold+0x83/0xdf
create_qp.cold+0x164/0x16e [mlx5_ib]
mlx5_ib_create_qp+0x358/0x28a0 [mlx5_ib]
create_qp.part.0+0x45b/0x6a0 [ib_core]
ib_create_qp_user+0x97/0x150 [ib_core]
ib_uverbs_handler_UVERBS_METHOD_QP_CREATE+0x92c/0x1250 [ib_uverbs]
ib_uverbs_cmd_verbs+0x1c38/0x3150 [ib_uverbs]
ib_uverbs_ioctl+0x169/0x260 [ib_uverbs]
__x64_sys_ioctl+0x866/0x14d0
do_syscall_64+0x3d/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
Allocated by task 246:
kasan_save_stack+0x1b/0x40
__kasan_kmalloc+0xa4/0xd0
create_qp.part.0+0x92/0x6a0 [ib_core]
ib_create_qp_user+0x97/0x150 [ib_core]
ib_uverbs_handler_UVERBS_METHOD_QP_CREATE+0x92c/0x1250 [ib_uverbs]
ib_uverbs_cmd_verbs+0x1c38/0x3150 [ib_uverbs]
ib_uverbs_ioctl+0x169/0x260 [ib_uverbs]
__x64_sys_ioctl+0x866/0x14d0
do_syscall_64+0x3d/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
Freed by task 246:
kasan_save_stack+0x1b/0x40
kasan_set_track+0x1c/0x30
kasan_set_free_info+0x20/0x30
__kasan_slab_free+0x10c/0x150
slab_free_freelist_hook+0xb4/0x1b0
kfree+0xe7/0x2a0
create_qp.part.0+0x52b/0x6a0 [ib_core]
ib_create_qp_user+0x97/0x150 [ib_core]
ib_uverbs_handler_UVERBS_METHOD_QP_CREATE+0x92c/0x1250 [ib_uverbs]
ib_uverbs_cmd_verbs+0x1c38/0x3150 [ib_uverbs]
ib_uverbs_ioctl+0x169/0x260 [ib_uverbs]
__x64_sys_ioctl+0x866/0x14d0
do_syscall_64+0x3d/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
Fixes: 514aee660df4 ("RDMA: Globally allocate and release QP memory")
Link: https://lore.kernel.org/r/2dbb2e2cbb1efb188a500e5634be1d71956424ce.1636631035.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/core/verbs.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/infiniband/core/verbs.c b/drivers/infiniband/core/verbs.c
index 89a2b21976d63..20a46d8731455 100644
--- a/drivers/infiniband/core/verbs.c
+++ b/drivers/infiniband/core/verbs.c
@@ -1232,6 +1232,9 @@ static struct ib_qp *create_qp(struct ib_device *dev, struct ib_pd *pd,
INIT_LIST_HEAD(&qp->rdma_mrs);
INIT_LIST_HEAD(&qp->sig_mrs);
+ qp->send_cq = attr->send_cq;
+ qp->recv_cq = attr->recv_cq;
+
rdma_restrack_new(&qp->res, RDMA_RESTRACK_QP);
WARN_ONCE(!udata && !caller, "Missing kernel QP owner");
rdma_restrack_set_name(&qp->res, udata ? NULL : caller);
--
2.33.0
From: Tariq Toukan <[email protected]>
[ Upstream commit cc4a9cc03faa6d8db1a6954bb536f2c1e63bdff6 ]
For the TLS RX resync flow, we maintain a list of TLS contexts
that require some attention, to communicate their resync information
to the HW.
Here we fix list corruptions, by protecting the entries against
movements coming from resync_handle_seq_match(), until their resync
handling in napi is fully completed.
Fixes: e9ce991bce5b ("net/mlx5e: kTLS, Add resiliency to RX resync failures")
Signed-off-by: Tariq Toukan <[email protected]>
Reviewed-by: Maxim Mikityanskiy <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../mellanox/mlx5/core/en_accel/ktls_rx.c | 23 ++++++++++++++-----
1 file changed, 17 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ktls_rx.c b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ktls_rx.c
index 62abce008c7b8..a2a9f68579dd8 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ktls_rx.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ktls_rx.c
@@ -55,6 +55,7 @@ struct mlx5e_ktls_offload_context_rx {
DECLARE_BITMAP(flags, MLX5E_NUM_PRIV_RX_FLAGS);
/* resync */
+ spinlock_t lock; /* protects resync fields */
struct mlx5e_ktls_rx_resync_ctx resync;
struct list_head list;
};
@@ -386,14 +387,18 @@ static void resync_handle_seq_match(struct mlx5e_ktls_offload_context_rx *priv_r
struct mlx5e_icosq *sq;
bool trigger_poll;
- memcpy(info->rec_seq, &priv_rx->resync.sw_rcd_sn_be, sizeof(info->rec_seq));
-
sq = &c->async_icosq;
ktls_resync = sq->ktls_resync;
+ trigger_poll = false;
spin_lock_bh(&ktls_resync->lock);
- list_add_tail(&priv_rx->list, &ktls_resync->list);
- trigger_poll = !test_and_set_bit(MLX5E_SQ_STATE_PENDING_TLS_RX_RESYNC, &sq->state);
+ spin_lock_bh(&priv_rx->lock);
+ memcpy(info->rec_seq, &priv_rx->resync.sw_rcd_sn_be, sizeof(info->rec_seq));
+ if (list_empty(&priv_rx->list)) {
+ list_add_tail(&priv_rx->list, &ktls_resync->list);
+ trigger_poll = !test_and_set_bit(MLX5E_SQ_STATE_PENDING_TLS_RX_RESYNC, &sq->state);
+ }
+ spin_unlock_bh(&priv_rx->lock);
spin_unlock_bh(&ktls_resync->lock);
if (!trigger_poll)
@@ -617,6 +622,8 @@ int mlx5e_ktls_add_rx(struct net_device *netdev, struct sock *sk,
if (err)
goto err_create_key;
+ INIT_LIST_HEAD(&priv_rx->list);
+ spin_lock_init(&priv_rx->lock);
priv_rx->crypto_info =
*(struct tls12_crypto_info_aes_gcm_128 *)crypto_info;
@@ -730,10 +737,14 @@ bool mlx5e_ktls_rx_handle_resync_list(struct mlx5e_channel *c, int budget)
priv_rx = list_first_entry(&local_list,
struct mlx5e_ktls_offload_context_rx,
list);
+ spin_lock(&priv_rx->lock);
cseg = post_static_params(sq, priv_rx);
- if (IS_ERR(cseg))
+ if (IS_ERR(cseg)) {
+ spin_unlock(&priv_rx->lock);
break;
- list_del(&priv_rx->list);
+ }
+ list_del_init(&priv_rx->list);
+ spin_unlock(&priv_rx->lock);
db_cseg = cseg;
}
if (db_cseg)
--
2.33.0
From: Christophe JAILLET <[email protected]>
[ Upstream commit c961a7d2aa23ae19e0099fbcdf1040fb760eea83 ]
If 'led_classdev_register()' fails, some additional resources should be
released.
Add the missing 'i8042_remove_filter()' and 'lis3lv02d_remove_fs()' calls
that are already in the remove function but are missing here.
Fixes: a4c724d0723b ("platform: hp_accel: add a i8042 filter to remove HPQ6000 data from kb bus stream")
Fixes: 9e0c79782143 ("lis3lv02d: merge with leds hp disk")
Signed-off-by: Christophe JAILLET <[email protected]>
Link: https://lore.kernel.org/r/5a4f218f8f16d2e3a7906b7ca3654ffa946895f8.1636314074.git.christophe.jaillet@wanadoo.fr
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/platform/x86/hp_accel.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/platform/x86/hp_accel.c b/drivers/platform/x86/hp_accel.c
index cc53f725c0419..ef24f53753c6e 100644
--- a/drivers/platform/x86/hp_accel.c
+++ b/drivers/platform/x86/hp_accel.c
@@ -331,9 +331,11 @@ static int lis3lv02d_probe(struct platform_device *device)
INIT_WORK(&hpled_led.work, delayed_set_status_worker);
ret = led_classdev_register(NULL, &hpled_led.led_classdev);
if (ret) {
+ i8042_remove_filter(hp_accel_i8042_filter);
lis3lv02d_joystick_disable(&lis3_dev);
lis3lv02d_poweroff(&lis3_dev);
flush_work(&hpled_led.work);
+ lis3lv02d_remove_fs(&lis3_dev);
return ret;
}
--
2.33.0
From: Randy Dunlap <[email protected]>
[ Upstream commit d6912b1251b47e6b04ea8c8881dfb35a6e7a3e29 ]
gpio-rockchip uses interfaces that are provided by the Kconfig
symbol GENERIC_IRQ_CHIP, so the driver should select that symbol
in order to prevent build errors.
Fixes these build errors (and more):
aarch64-linux-ld: drivers/gpio/gpio-rockchip.o: in function `rockchip_irq_disable':
gpio-rockchip.c:(.text+0x454): undefined reference to `irq_gc_mask_set_bit'
aarch64-linux-ld: drivers/gpio/gpio-rockchip.o: in function `rockchip_irq_enable':
gpio-rockchip.c:(.text+0x478): undefined reference to `irq_gc_mask_clr_bit'
aarch64-linux-ld: drivers/gpio/gpio-rockchip.o: in function `rockchip_interrupts_register':
gpio-rockchip.c:(.text+0x518): undefined reference to `irq_generic_chip_ops'
aarch64-linux-ld: gpio-rockchip.c:(.text+0x594): undefined reference to `__irq_alloc_domain_generic_chips'
aarch64-linux-ld: gpio-rockchip.c:(.text+0x5cc): undefined reference to `irq_get_domain_generic_chip'
aarch64-linux-ld: gpio-rockchip.c:(.text+0x5e0): undefined reference to `irq_gc_ack_set_bit'
aarch64-linux-ld: gpio-rockchip.c:(.text+0x604): undefined reference to `irq_gc_set_wake'
Fixes: 936ee2675eee ("gpio/rockchip: add driver for rockchip gpio")
Signed-off-by: Randy Dunlap <[email protected]>
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Bartosz Golaszewski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/gpio/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index fae5141251e5d..947474f6abb45 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -523,6 +523,7 @@ config GPIO_REG
config GPIO_ROCKCHIP
tristate "Rockchip GPIO support"
depends on ARCH_ROCKCHIP || COMPILE_TEST
+ select GENERIC_IRQ_CHIP
select GPIOLIB_IRQCHIP
default ARCH_ROCKCHIP
help
--
2.33.0
From: Colin Ian King <[email protected]>
[ Upstream commit 255e51da15baed47531beefd02f222e4dc01f1c1 ]
In the case where fw_getenv returns an error when fetching values
for ememsizea and memsize then variable phys_memsize is not assigned
a variable and will be uninitialized on a zero check of phys_memsize.
Fix this by initializing phys_memsize to zero.
Cleans up cppcheck error:
arch/mips/generic/yamon-dt.c:100:7: error: Uninitialized variable: phys_memsize [uninitvar]
Fixes: f41d2430bbd6 ("MIPS: generic/yamon-dt: Support > 256MB of RAM")
Signed-off-by: Colin Ian King <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/mips/generic/yamon-dt.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/mips/generic/yamon-dt.c b/arch/mips/generic/yamon-dt.c
index a3aa22c77cadc..a07a5edbcda78 100644
--- a/arch/mips/generic/yamon-dt.c
+++ b/arch/mips/generic/yamon-dt.c
@@ -75,7 +75,7 @@ static unsigned int __init gen_fdt_mem_array(
__init int yamon_dt_append_memory(void *fdt,
const struct yamon_mem_region *regions)
{
- unsigned long phys_memsize, memsize;
+ unsigned long phys_memsize = 0, memsize;
__be32 mem_array[2 * MAX_MEM_ARRAY_ENTRIES];
unsigned int mem_entries;
int i, err, mem_off;
--
2.33.0
From: Daniel Borkmann <[email protected]>
[ Upstream commit 353050be4c19e102178ccc05988101887c25ae53 ]
Commit a23740ec43ba ("bpf: Track contents of read-only maps as scalars") is
checking whether maps are read-only both from BPF program side and user space
side, and then, given their content is constant, reading out their data via
map->ops->map_direct_value_addr() which is then subsequently used as known
scalar value for the register, that is, it is marked as __mark_reg_known()
with the read value at verification time. Before a23740ec43ba, the register
content was marked as an unknown scalar so the verifier could not make any
assumptions about the map content.
The current implementation however is prone to a TOCTOU race, meaning, the
value read as known scalar for the register is not guaranteed to be exactly
the same at a later point when the program is executed, and as such, the
prior made assumptions of the verifier with regards to the program will be
invalid which can cause issues such as OOB access, etc.
While the BPF_F_RDONLY_PROG map flag is always fixed and required to be
specified at map creation time, the map->frozen property is initially set to
false for the map given the map value needs to be populated, e.g. for global
data sections. Once complete, the loader "freezes" the map from user space
such that no subsequent updates/deletes are possible anymore. For the rest
of the lifetime of the map, this freeze one-time trigger cannot be undone
anymore after a successful BPF_MAP_FREEZE cmd return. Meaning, any new BPF_*
cmd calls which would update/delete map entries will be rejected with -EPERM
since map_get_sys_perms() removes the FMODE_CAN_WRITE permission. This also
means that pending update/delete map entries must still complete before this
guarantee is given. This corner case is not an issue for loaders since they
create and prepare such program private map in successive steps.
However, a malicious user is able to trigger this TOCTOU race in two different
ways: i) via userfaultfd, and ii) via batched updates. For i) userfaultfd is
used to expand the competition interval, so that map_update_elem() can modify
the contents of the map after map_freeze() and bpf_prog_load() were executed.
This works, because userfaultfd halts the parallel thread which triggered a
map_update_elem() at the time where we copy key/value from the user buffer and
this already passed the FMODE_CAN_WRITE capability test given at that time the
map was not "frozen". Then, the main thread performs the map_freeze() and
bpf_prog_load(), and once that had completed successfully, the other thread
is woken up to complete the pending map_update_elem() which then changes the
map content. For ii) the idea of the batched update is similar, meaning, when
there are a large number of updates to be processed, it can increase the
competition interval between the two. It is therefore possible in practice to
modify the contents of the map after executing map_freeze() and bpf_prog_load().
One way to fix both i) and ii) at the same time is to expand the use of the
map's map->writecnt. The latter was introduced in fc9702273e2e ("bpf: Add mmap()
support for BPF_MAP_TYPE_ARRAY") and further refined in 1f6cb19be2e2 ("bpf:
Prevent re-mmap()'ing BPF map as writable for initially r/o mapping") with
the rationale to make a writable mmap()'ing of a map mutually exclusive with
read-only freezing. The counter indicates writable mmap() mappings and then
prevents/fails the freeze operation. Its semantics can be expanded beyond
just mmap() by generally indicating ongoing write phases. This would essentially
span any parallel regular and batched flavor of update/delete operation and
then also have map_freeze() fail with -EBUSY. For the check_mem_access() in
the verifier we expand upon the bpf_map_is_rdonly() check ensuring that all
last pending writes have completed via bpf_map_write_active() test. Once the
map->frozen is set and bpf_map_write_active() indicates a map->writecnt of 0
only then we are really guaranteed to use the map's data as known constants.
For map->frozen being set and pending writes in process of still being completed
we fall back to marking that register as unknown scalar so we don't end up
making assumptions about it. With this, both TOCTOU reproducers from i) and
ii) are fixed.
Note that the map->writecnt has been converted into a atomic64 in the fix in
order to avoid a double freeze_mutex mutex_{un,}lock() pair when updating
map->writecnt in the various map update/delete BPF_* cmd flavors. Spanning
the freeze_mutex over entire map update/delete operations in syscall side
would not be possible due to then causing everything to be serialized.
Similarly, something like synchronize_rcu() after setting map->frozen to wait
for update/deletes to complete is not possible either since it would also
have to span the user copy which can sleep. On the libbpf side, this won't
break d66562fba1ce ("libbpf: Add BPF object skeleton support") as the
anonymous mmap()-ed "map initialization image" is remapped as a BPF map-backed
mmap()-ed memory where for .rodata it's non-writable.
Fixes: a23740ec43ba ("bpf: Track contents of read-only maps as scalars")
Reported-by: [email protected]
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/linux/bpf.h | 3 ++-
kernel/bpf/syscall.c | 57 +++++++++++++++++++++++++++----------------
kernel/bpf/verifier.c | 17 ++++++++++++-
3 files changed, 54 insertions(+), 23 deletions(-)
diff --git a/include/linux/bpf.h b/include/linux/bpf.h
index 3db6f6c95489e..bca11ac818c1f 100644
--- a/include/linux/bpf.h
+++ b/include/linux/bpf.h
@@ -190,7 +190,7 @@ struct bpf_map {
atomic64_t usercnt;
struct work_struct work;
struct mutex freeze_mutex;
- u64 writecnt; /* writable mmap cnt; protected by freeze_mutex */
+ atomic64_t writecnt;
};
static inline bool map_value_has_spin_lock(const struct bpf_map *map)
@@ -1387,6 +1387,7 @@ void bpf_map_put(struct bpf_map *map);
void *bpf_map_area_alloc(u64 size, int numa_node);
void *bpf_map_area_mmapable_alloc(u64 size, int numa_node);
void bpf_map_area_free(void *base);
+bool bpf_map_write_active(const struct bpf_map *map);
void bpf_map_init_from_attr(struct bpf_map *map, union bpf_attr *attr);
int generic_map_lookup_batch(struct bpf_map *map,
const union bpf_attr *attr,
diff --git a/kernel/bpf/syscall.c b/kernel/bpf/syscall.c
index 1cad6979a0d0f..ecd51a8a8680c 100644
--- a/kernel/bpf/syscall.c
+++ b/kernel/bpf/syscall.c
@@ -132,6 +132,21 @@ static struct bpf_map *find_and_alloc_map(union bpf_attr *attr)
return map;
}
+static void bpf_map_write_active_inc(struct bpf_map *map)
+{
+ atomic64_inc(&map->writecnt);
+}
+
+static void bpf_map_write_active_dec(struct bpf_map *map)
+{
+ atomic64_dec(&map->writecnt);
+}
+
+bool bpf_map_write_active(const struct bpf_map *map)
+{
+ return atomic64_read(&map->writecnt) != 0;
+}
+
static u32 bpf_map_value_size(const struct bpf_map *map)
{
if (map->map_type == BPF_MAP_TYPE_PERCPU_HASH ||
@@ -596,11 +611,8 @@ static void bpf_map_mmap_open(struct vm_area_struct *vma)
{
struct bpf_map *map = vma->vm_file->private_data;
- if (vma->vm_flags & VM_MAYWRITE) {
- mutex_lock(&map->freeze_mutex);
- map->writecnt++;
- mutex_unlock(&map->freeze_mutex);
- }
+ if (vma->vm_flags & VM_MAYWRITE)
+ bpf_map_write_active_inc(map);
}
/* called for all unmapped memory region (including initial) */
@@ -608,11 +620,8 @@ static void bpf_map_mmap_close(struct vm_area_struct *vma)
{
struct bpf_map *map = vma->vm_file->private_data;
- if (vma->vm_flags & VM_MAYWRITE) {
- mutex_lock(&map->freeze_mutex);
- map->writecnt--;
- mutex_unlock(&map->freeze_mutex);
- }
+ if (vma->vm_flags & VM_MAYWRITE)
+ bpf_map_write_active_dec(map);
}
static const struct vm_operations_struct bpf_map_default_vmops = {
@@ -663,7 +672,7 @@ static int bpf_map_mmap(struct file *filp, struct vm_area_struct *vma)
goto out;
if (vma->vm_flags & VM_MAYWRITE)
- map->writecnt++;
+ bpf_map_write_active_inc(map);
out:
mutex_unlock(&map->freeze_mutex);
return err;
@@ -1122,6 +1131,7 @@ static int map_update_elem(union bpf_attr *attr, bpfptr_t uattr)
map = __bpf_map_get(f);
if (IS_ERR(map))
return PTR_ERR(map);
+ bpf_map_write_active_inc(map);
if (!(map_get_sys_perms(map, f) & FMODE_CAN_WRITE)) {
err = -EPERM;
goto err_put;
@@ -1157,6 +1167,7 @@ free_value:
free_key:
kvfree(key);
err_put:
+ bpf_map_write_active_dec(map);
fdput(f);
return err;
}
@@ -1179,6 +1190,7 @@ static int map_delete_elem(union bpf_attr *attr)
map = __bpf_map_get(f);
if (IS_ERR(map))
return PTR_ERR(map);
+ bpf_map_write_active_inc(map);
if (!(map_get_sys_perms(map, f) & FMODE_CAN_WRITE)) {
err = -EPERM;
goto err_put;
@@ -1209,6 +1221,7 @@ static int map_delete_elem(union bpf_attr *attr)
out:
kvfree(key);
err_put:
+ bpf_map_write_active_dec(map);
fdput(f);
return err;
}
@@ -1516,6 +1529,7 @@ static int map_lookup_and_delete_elem(union bpf_attr *attr)
map = __bpf_map_get(f);
if (IS_ERR(map))
return PTR_ERR(map);
+ bpf_map_write_active_inc(map);
if (!(map_get_sys_perms(map, f) & FMODE_CAN_READ) ||
!(map_get_sys_perms(map, f) & FMODE_CAN_WRITE)) {
err = -EPERM;
@@ -1580,6 +1594,7 @@ free_value:
free_key:
kvfree(key);
err_put:
+ bpf_map_write_active_dec(map);
fdput(f);
return err;
}
@@ -1607,8 +1622,7 @@ static int map_freeze(const union bpf_attr *attr)
}
mutex_lock(&map->freeze_mutex);
-
- if (map->writecnt) {
+ if (bpf_map_write_active(map)) {
err = -EBUSY;
goto err_put;
}
@@ -4143,6 +4157,9 @@ static int bpf_map_do_batch(const union bpf_attr *attr,
union bpf_attr __user *uattr,
int cmd)
{
+ bool has_read = cmd == BPF_MAP_LOOKUP_BATCH ||
+ cmd == BPF_MAP_LOOKUP_AND_DELETE_BATCH;
+ bool has_write = cmd != BPF_MAP_LOOKUP_BATCH;
struct bpf_map *map;
int err, ufd;
struct fd f;
@@ -4155,16 +4172,13 @@ static int bpf_map_do_batch(const union bpf_attr *attr,
map = __bpf_map_get(f);
if (IS_ERR(map))
return PTR_ERR(map);
-
- if ((cmd == BPF_MAP_LOOKUP_BATCH ||
- cmd == BPF_MAP_LOOKUP_AND_DELETE_BATCH) &&
- !(map_get_sys_perms(map, f) & FMODE_CAN_READ)) {
+ if (has_write)
+ bpf_map_write_active_inc(map);
+ if (has_read && !(map_get_sys_perms(map, f) & FMODE_CAN_READ)) {
err = -EPERM;
goto err_put;
}
-
- if (cmd != BPF_MAP_LOOKUP_BATCH &&
- !(map_get_sys_perms(map, f) & FMODE_CAN_WRITE)) {
+ if (has_write && !(map_get_sys_perms(map, f) & FMODE_CAN_WRITE)) {
err = -EPERM;
goto err_put;
}
@@ -4177,8 +4191,9 @@ static int bpf_map_do_batch(const union bpf_attr *attr,
BPF_DO_BATCH(map->ops->map_update_batch);
else
BPF_DO_BATCH(map->ops->map_delete_batch);
-
err_put:
+ if (has_write)
+ bpf_map_write_active_dec(map);
fdput(f);
return err;
}
diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c
index cba37d83451eb..2105b57c9c23a 100644
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -3885,7 +3885,22 @@ static void coerce_reg_to_size(struct bpf_reg_state *reg, int size)
static bool bpf_map_is_rdonly(const struct bpf_map *map)
{
- return (map->map_flags & BPF_F_RDONLY_PROG) && map->frozen;
+ /* A map is considered read-only if the following condition are true:
+ *
+ * 1) BPF program side cannot change any of the map content. The
+ * BPF_F_RDONLY_PROG flag is throughout the lifetime of a map
+ * and was set at map creation time.
+ * 2) The map value(s) have been initialized from user space by a
+ * loader and then "frozen", such that no new map update/delete
+ * operations from syscall side are possible for the rest of
+ * the map's lifetime from that point onwards.
+ * 3) Any parallel/pending map update/delete operations from syscall
+ * side have been completed. Only after that point, it's safe to
+ * assume that map value(s) are immutable.
+ */
+ return (map->map_flags & BPF_F_RDONLY_PROG) &&
+ READ_ONCE(map->frozen) &&
+ !bpf_map_write_active(map);
}
static int bpf_map_direct_read(struct bpf_map *map, int off, int size, u64 *val)
--
2.33.0
From: Grzegorz Szczurek <[email protected]>
[ Upstream commit 9a6e9e483a9684a34573fd9f9e30ecfb047cb8cb ]
Now setting combine to 0 will be rejected with the
appropriate error code.
This has been implemented by adding a condition that checks
the value of combine equal to zero.
Without this patch, when the user requested it, no error was
returned and combine was set to the default value for VF.
Fixes: 5520deb15326 ("iavf: Enable support for up to 16 queues")
Signed-off-by: Grzegorz Szczurek <[email protected]>
Tested-by: Tony Brelinski <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/iavf/iavf_ethtool.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/intel/iavf/iavf_ethtool.c b/drivers/net/ethernet/intel/iavf/iavf_ethtool.c
index 25ee0606e625f..144a776793597 100644
--- a/drivers/net/ethernet/intel/iavf/iavf_ethtool.c
+++ b/drivers/net/ethernet/intel/iavf/iavf_ethtool.c
@@ -1787,7 +1787,7 @@ static int iavf_set_channels(struct net_device *netdev,
/* All of these should have already been checked by ethtool before this
* even gets to us, but just to be sure.
*/
- if (num_req > adapter->vsi_res->num_queue_pairs)
+ if (num_req == 0 || num_req > adapter->vsi_res->num_queue_pairs)
return -EINVAL;
if (num_req == adapter->num_active_queues)
--
2.33.0
From: Mark Bloch <[email protected]>
[ Upstream commit 2eb0cb31bc4ce2ede5460cf3ef433b40cf5f040d ]
A user can enable VFs without changing E-Switch mode, this can happen
when a user moves straight to switchdev mode and only once in switchdev
VFs are enabled via the sysfs interface.
The cited commit assumed this isn't possible and exposed a single
API function where the E-switch calls into the lag code, breaks the lag
and prevents any other lag operations to take place until the
E-switch update has ended.
Breaking the hardware lag when it isn't needed can make it such that
hardware lag can't be enabled again.
In the sysfs call path check if the current E-Switch mode is NONE,
in the context of the function it can only mean the E-Switch is moving
out of NONE mode and the hardware lag should be disabled and enabled
once the mode change has ended. If the mode isn't NONE it means
VFs are about to be enabled and such operation doesn't require
toggling the hardware lag.
Fixes: cac1eb2cf2e3 ("net/mlx5: Lag, properly lock eswitch if needed")
Signed-off-by: Mark Bloch <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/mellanox/mlx5/core/eswitch.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
index 5872cc8bf9532..51a8cecc4a7ce 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
@@ -1305,12 +1305,17 @@ abort:
*/
int mlx5_eswitch_enable(struct mlx5_eswitch *esw, int num_vfs)
{
+ bool toggle_lag;
int ret;
if (!mlx5_esw_allowed(esw))
return 0;
- mlx5_lag_disable_change(esw->dev);
+ toggle_lag = esw->mode == MLX5_ESWITCH_NONE;
+
+ if (toggle_lag)
+ mlx5_lag_disable_change(esw->dev);
+
down_write(&esw->mode_lock);
if (esw->mode == MLX5_ESWITCH_NONE) {
ret = mlx5_eswitch_enable_locked(esw, MLX5_ESWITCH_LEGACY, num_vfs);
@@ -1324,7 +1329,10 @@ int mlx5_eswitch_enable(struct mlx5_eswitch *esw, int num_vfs)
esw->esw_funcs.num_vfs = num_vfs;
}
up_write(&esw->mode_lock);
- mlx5_lag_enable_change(esw->dev);
+
+ if (toggle_lag)
+ mlx5_lag_enable_change(esw->dev);
+
return ret;
}
--
2.33.0
From: Chuck Lever <[email protected]>
[ Upstream commit c0019b7db1d7ac62c711cda6b357a659d46428fe ]
[email protected] reports:
> nfsd4_decode_bitmap4() will write beyond bmval[bmlen-1] if the RPC
> directs it to do so. This can cause nfsd4_decode_state_protect4_a()
> to write client-supplied data beyond the end of
> nfsd4_exchange_id.spo_must_allow[] when called by
> nfsd4_decode_exchange_id().
Rewrite the loops so nfsd4_decode_bitmap() cannot iterate beyond
@bmlen.
Reported by: [email protected]
Fixes: d1c263a031e8 ("NFSD: Replace READ* macros in nfsd4_decode_fattr()")
Signed-off-by: Chuck Lever <[email protected]>
Signed-off-by: J. Bruce Fields <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/nfsd/nfs4xdr.c | 7 ++-----
1 file changed, 2 insertions(+), 5 deletions(-)
diff --git a/fs/nfsd/nfs4xdr.c b/fs/nfsd/nfs4xdr.c
index cf030ebe28275..266d5152c3216 100644
--- a/fs/nfsd/nfs4xdr.c
+++ b/fs/nfsd/nfs4xdr.c
@@ -288,11 +288,8 @@ nfsd4_decode_bitmap4(struct nfsd4_compoundargs *argp, u32 *bmval, u32 bmlen)
p = xdr_inline_decode(argp->xdr, count << 2);
if (!p)
return nfserr_bad_xdr;
- i = 0;
- while (i < count)
- bmval[i++] = be32_to_cpup(p++);
- while (i < bmlen)
- bmval[i++] = 0;
+ for (i = 0; i < bmlen; i++)
+ bmval[i] = (i < count) ? be32_to_cpup(p++) : 0;
return nfs_ok;
}
--
2.33.0
From: Mateusz Palczewski <[email protected]>
[ Upstream commit 4e5e6b5d9d1334d3490326b6922a2daaf56a867f ]
Fixed return correct code from set the new channel count.
Implemented by check if reset is done in appropriate time.
This solution give a extra time to pf for reset vf in case
when user want set new channel count for all vfs.
Without this patch it is possible to return misleading output
code to user and vf reset not to be correctly performed by pf.
Fixes: 5520deb15326 ("iavf: Enable support for up to 16 queues")
Signed-off-by: Grzegorz Szczurek <[email protected]>
Signed-off-by: Mateusz Palczewski <[email protected]>
Tested-by: Konrad Jankowski <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/iavf/iavf_ethtool.c | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/drivers/net/ethernet/intel/iavf/iavf_ethtool.c b/drivers/net/ethernet/intel/iavf/iavf_ethtool.c
index 5a359a0a20ecc..136c801f5584a 100644
--- a/drivers/net/ethernet/intel/iavf/iavf_ethtool.c
+++ b/drivers/net/ethernet/intel/iavf/iavf_ethtool.c
@@ -1776,6 +1776,7 @@ static int iavf_set_channels(struct net_device *netdev,
{
struct iavf_adapter *adapter = netdev_priv(netdev);
u32 num_req = ch->combined_count;
+ int i;
if ((adapter->vf_res->vf_cap_flags & VIRTCHNL_VF_OFFLOAD_ADQ) &&
adapter->num_tc) {
@@ -1798,6 +1799,20 @@ static int iavf_set_channels(struct net_device *netdev,
adapter->num_req_queues = num_req;
adapter->flags |= IAVF_FLAG_REINIT_ITR_NEEDED;
iavf_schedule_reset(adapter);
+
+ /* wait for the reset is done */
+ for (i = 0; i < IAVF_RESET_WAIT_COMPLETE_COUNT; i++) {
+ msleep(IAVF_RESET_WAIT_MS);
+ if (adapter->flags & IAVF_FLAG_RESET_PENDING)
+ continue;
+ break;
+ }
+ if (i == IAVF_RESET_WAIT_COMPLETE_COUNT) {
+ adapter->flags &= ~IAVF_FLAG_REINIT_ITR_NEEDED;
+ adapter->num_active_queues = num_req;
+ return -EOPNOTSUPP;
+ }
+
return 0;
}
--
2.33.0
From: Nicholas Nunley <[email protected]>
[ Upstream commit 2135a8d5c8186bc92901dc00f179ffd50e54c2ac ]
In iavf_configure_clsflower() the function will bail out if it is unable
to obtain the crit_section lock in a reasonable time. However, it will
clear the lock when exiting, so fix this.
Fixes: 640a8af5841f ("i40evf: Reorder configure_clsflower to avoid deadlock on error")
Signed-off-by: Nicholas Nunley <[email protected]>
Tested-by: Tony Brelinski <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/iavf/iavf_main.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/intel/iavf/iavf_main.c b/drivers/net/ethernet/intel/iavf/iavf_main.c
index 5664a1905e8bb..f64ccf6286ec1 100644
--- a/drivers/net/ethernet/intel/iavf/iavf_main.c
+++ b/drivers/net/ethernet/intel/iavf/iavf_main.c
@@ -3041,8 +3041,10 @@ static int iavf_configure_clsflower(struct iavf_adapter *adapter,
return -ENOMEM;
while (!mutex_trylock(&adapter->crit_lock)) {
- if (--count == 0)
- goto err;
+ if (--count == 0) {
+ kfree(filter);
+ return err;
+ }
udelay(1);
}
--
2.33.0
From: Raed Salem <[email protected]>
[ Upstream commit c4c3176739dfa6efcc5b1d1de4b3fd2b51b048c7 ]
On regular ConnectX HCAs getting encap mode isn't supported when the
E-Switch is in NONE mode. Current code would return no error code when
trying to get encap mode in such case which is wrong.
Fix by returning error value to indicate failure to caller in such case.
Fixes: 8e0aa4bc959c ("net/mlx5: E-switch, Protect eswitch mode changes")
Signed-off-by: Raed Salem <[email protected]>
Reviewed-by: Mark Bloch <[email protected]>
Reviewed-by: Maor Dickman <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
index 08534d562d5a9..0c79e11339362 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
@@ -3581,7 +3581,7 @@ int mlx5_devlink_eswitch_encap_mode_get(struct devlink *devlink,
*encap = esw->offloads.encap;
unlock:
up_write(&esw->mode_lock);
- return 0;
+ return err;
}
static bool
--
2.33.0
From: Maher Sanalla <[email protected]>
[ Upstream commit ae396d85c01c7bdc9eeceecde1f493d03f793465 ]
Currently, In NETDEV_CHANGELOWERSTATE/NETDEV_CHANGEUPPERSTATE events
handling, tracking is not fully completed if the LAG device is not ready
at the time the events occur. But, we must keep track of the upper and
lower states after receiving the events because RoCE needs this info in
mlx5_lag_get_roce_netdev() - in order to return the corresponding port
that its running on. Returning the wrong (not most recent) port will lead
to gids table being incorrect.
For example: If during the attachment of a slave to the bond, the other
non-attached port performs pci_reload, then the LAG device is not ready,
but that should not result in dismissing attached slave tracker update
automatically (which is performed in mlx5_handle_changelowerstate()), Since
these events might not come later, which can lead to both bond ports
having tx_enabled=0 - which is not a valid state of LAG bond.
Fixes: 9b412cc35f00 ("net/mlx5e: Add LAG warning if bond slave is not lag master")
Signed-off-by: Maher Sanalla <[email protected]>
Reviewed-by: Mark Bloch <[email protected]>
Reviewed-by: Jianbo Liu <[email protected]>
Reviewed-by: Roi Dayan <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/mellanox/mlx5/core/lag.c | 28 +++++++++----------
1 file changed, 13 insertions(+), 15 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lag.c b/drivers/net/ethernet/mellanox/mlx5/core/lag.c
index d2105c1635c34..c19d9327095b2 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/lag.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/lag.c
@@ -565,6 +565,7 @@ static int mlx5_handle_changeupper_event(struct mlx5_lag *ldev,
bool is_bonded, is_in_lag, mode_supported;
int bond_status = 0;
int num_slaves = 0;
+ int changed = 0;
int idx;
if (!netif_is_lag_master(upper))
@@ -601,27 +602,27 @@ static int mlx5_handle_changeupper_event(struct mlx5_lag *ldev,
*/
is_in_lag = num_slaves == MLX5_MAX_PORTS && bond_status == 0x3;
- if (!mlx5_lag_is_ready(ldev) && is_in_lag) {
- NL_SET_ERR_MSG_MOD(info->info.extack,
- "Can't activate LAG offload, PF is configured with more than 64 VFs");
- return 0;
- }
-
/* Lag mode must be activebackup or hash. */
mode_supported = tracker->tx_type == NETDEV_LAG_TX_TYPE_ACTIVEBACKUP ||
tracker->tx_type == NETDEV_LAG_TX_TYPE_HASH;
- if (is_in_lag && !mode_supported)
- NL_SET_ERR_MSG_MOD(info->info.extack,
- "Can't activate LAG offload, TX type isn't supported");
-
is_bonded = is_in_lag && mode_supported;
if (tracker->is_bonded != is_bonded) {
tracker->is_bonded = is_bonded;
- return 1;
+ changed = 1;
}
- return 0;
+ if (!is_in_lag)
+ return changed;
+
+ if (!mlx5_lag_is_ready(ldev))
+ NL_SET_ERR_MSG_MOD(info->info.extack,
+ "Can't activate LAG offload, PF is configured with more than 64 VFs");
+ else if (!mode_supported)
+ NL_SET_ERR_MSG_MOD(info->info.extack,
+ "Can't activate LAG offload, TX type isn't supported");
+
+ return changed;
}
static int mlx5_handle_changelowerstate_event(struct mlx5_lag *ldev,
@@ -664,9 +665,6 @@ static int mlx5_lag_netdev_event(struct notifier_block *this,
ldev = container_of(this, struct mlx5_lag, nb);
- if (!mlx5_lag_is_ready(ldev) && event == NETDEV_CHANGELOWERSTATE)
- return NOTIFY_DONE;
-
tracker = ldev->tracker;
switch (event) {
--
2.33.0
From: Jacob Keller <[email protected]>
[ Upstream commit 4f0400803818f2642f066d3eacaf013f23554cc7 ]
In iavf_config_clsflower, the filter structure could be accidentally
released at the end, if iavf_parse_cls_flower or iavf_handle_tclass ever
return a non-zero but positive value.
In this case, the function continues through to the end, and will call
kfree() on the filter structure even though it has been added to the
linked list.
This can actually happen because iavf_parse_cls_flower will return
a positive IAVF_ERR_CONFIG value instead of the traditional negative
error codes.
Fix this by ensuring that the kfree() check and error checks are
similar. Use the more idiomatic "if (err)" to catch all non-zero error
codes.
Fixes: 0075fa0fadd0 ("i40evf: Add support to apply cloud filters")
Signed-off-by: Jacob Keller <[email protected]>
Tested-by: Tony Brelinski <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/iavf/iavf_main.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/intel/iavf/iavf_main.c b/drivers/net/ethernet/intel/iavf/iavf_main.c
index 44ea67cb3716b..43c33effd4177 100644
--- a/drivers/net/ethernet/intel/iavf/iavf_main.c
+++ b/drivers/net/ethernet/intel/iavf/iavf_main.c
@@ -3054,11 +3054,11 @@ static int iavf_configure_clsflower(struct iavf_adapter *adapter,
/* start out with flow type and eth type IPv4 to begin with */
filter->f.flow_type = VIRTCHNL_TCP_V4_FLOW;
err = iavf_parse_cls_flower(adapter, cls_flower, filter);
- if (err < 0)
+ if (err)
goto err;
err = iavf_handle_tclass(adapter, tc, filter);
- if (err < 0)
+ if (err)
goto err;
/* add filter to the list */
--
2.33.0
From: Nicholas Nunley <[email protected]>
[ Upstream commit 8a4a126f4be88eb8b5f00a165ab58c35edf4ef76 ]
If the driver has lost contact with the PF then it enters a disabled state
and frees adapter->vf_res. However, ndo_fix_features can still be called on
the interface, so we need to check for this condition first. Since we have
no information on the features at this time simply leave them unmodified
and return.
Fixes: c4445aedfe09 ("i40evf: Fix VLAN features")
Signed-off-by: Nicholas Nunley <[email protected]>
Tested-by: Tony Brelinski <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/iavf/iavf_main.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/intel/iavf/iavf_main.c b/drivers/net/ethernet/intel/iavf/iavf_main.c
index cada4e0e40b48..12976ccca1b6e 100644
--- a/drivers/net/ethernet/intel/iavf/iavf_main.c
+++ b/drivers/net/ethernet/intel/iavf/iavf_main.c
@@ -3442,7 +3442,8 @@ static netdev_features_t iavf_fix_features(struct net_device *netdev,
{
struct iavf_adapter *adapter = netdev_priv(netdev);
- if (!(adapter->vf_res->vf_cap_flags & VIRTCHNL_VF_OFFLOAD_VLAN))
+ if (adapter->vf_res &&
+ !(adapter->vf_res->vf_cap_flags & VIRTCHNL_VF_OFFLOAD_VLAN))
features &= ~(NETIF_F_HW_VLAN_CTAG_TX |
NETIF_F_HW_VLAN_CTAG_RX |
NETIF_F_HW_VLAN_CTAG_FILTER);
--
2.33.0
From: Jack Wang <[email protected]>
[ Upstream commit 378c67413de18b69fb3bb78d8c4f0f1192cfa973 ]
If the FW doesn't support MLX4_DEV_CAP_FLAG2_DIAG_PER_PORT, mlx4 driver
will fail the ib_setup_port_attrs, which is called from
ib_register_device()/enable_device_and_get(), in the end leads to device
not detected[1][2]
To fix it, add a new mlx4_ib_hw_stats_ops1, w/o alloc_hw_port_stats if FW
does not support MLX4_DEV_CAP_FLAG2_DIAG_PER_PORT.
[1] https://bugzilla.redhat.com/show_bug.cgi?id=2014094
[2] https://lore.kernel.org/linux-rdma/CAMGffEn2wvEnmzc0xe=xYiCLqpphiHDBxCxqAELrBofbUAMQxw@mail.gmail.com
Fixes: 4b5f4d3fb408 ("RDMA: Split the alloc_hw_stats() ops to port and device variants")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jack Wang <[email protected]>
Reviewed-by: Leon Romanovsky <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/infiniband/hw/mlx4/main.c | 18 +++++++++++++++---
1 file changed, 15 insertions(+), 3 deletions(-)
diff --git a/drivers/infiniband/hw/mlx4/main.c b/drivers/infiniband/hw/mlx4/main.c
index f367f4a4abffc..aec2e1851fa70 100644
--- a/drivers/infiniband/hw/mlx4/main.c
+++ b/drivers/infiniband/hw/mlx4/main.c
@@ -2217,6 +2217,11 @@ static const struct ib_device_ops mlx4_ib_hw_stats_ops = {
.get_hw_stats = mlx4_ib_get_hw_stats,
};
+static const struct ib_device_ops mlx4_ib_hw_stats_ops1 = {
+ .alloc_hw_device_stats = mlx4_ib_alloc_hw_device_stats,
+ .get_hw_stats = mlx4_ib_get_hw_stats,
+};
+
static int mlx4_ib_alloc_diag_counters(struct mlx4_ib_dev *ibdev)
{
struct mlx4_ib_diag_counters *diag = ibdev->diag_counters;
@@ -2229,9 +2234,16 @@ static int mlx4_ib_alloc_diag_counters(struct mlx4_ib_dev *ibdev)
return 0;
for (i = 0; i < MLX4_DIAG_COUNTERS_TYPES; i++) {
- /* i == 1 means we are building port counters */
- if (i && !per_port)
- continue;
+ /*
+ * i == 1 means we are building port counters, set a different
+ * stats ops without port stats callback.
+ */
+ if (i && !per_port) {
+ ib_set_device_ops(&ibdev->ib_dev,
+ &mlx4_ib_hw_stats_ops1);
+
+ return 0;
+ }
ret = __mlx4_ib_alloc_diag_counters(ibdev, &diag[i].name,
&diag[i].offset,
--
2.33.0
From: Nicholas Nunley <[email protected]>
[ Upstream commit 89f22f129696ab53cfbc608e0a2184d0fea46ac1 ]
iavf_free_queues() clears adapter->num_active_queues, which
iavf_free_q_vectors() relies on, so swap the order of these two function
calls in iavf_disable_vf(). This resolves a panic encountered when the
interface is disabled and then later brought up again after PF
communication is restored.
Fixes: 65c7006f234c ("i40evf: assign num_active_queues inside i40evf_alloc_queues")
Signed-off-by: Nicholas Nunley <[email protected]>
Tested-by: Tony Brelinski <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/iavf/iavf_main.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/intel/iavf/iavf_main.c b/drivers/net/ethernet/intel/iavf/iavf_main.c
index 12976ccca1b6e..5664a1905e8bb 100644
--- a/drivers/net/ethernet/intel/iavf/iavf_main.c
+++ b/drivers/net/ethernet/intel/iavf/iavf_main.c
@@ -2074,8 +2074,8 @@ static void iavf_disable_vf(struct iavf_adapter *adapter)
iavf_free_misc_irq(adapter);
iavf_reset_interrupt_capability(adapter);
- iavf_free_queues(adapter);
iavf_free_q_vectors(adapter);
+ iavf_free_queues(adapter);
memset(adapter->vf_res, 0, IAVF_VIRTCHNL_VF_RESOURCE_SIZE);
iavf_shutdown_adminq(&adapter->hw);
adapter->netdev->flags &= ~IFF_UP;
--
2.33.0
From: Roi Dayan <[email protected]>
[ Upstream commit 806401c20a0f9c51b6c8fd7035671e6ca841f6c2 ]
CT clear action offload adds additional mod hdr actions to the
flow's original mod actions in order to clear the registers which
hold ct_state.
When such flow also includes encap action, a neigh update event
can cause the driver to unoffload the flow and then reoffload it.
Each time this happens, the ct clear handling adds that same set
of mod hdr actions to reset ct_state until the max of mod hdr
actions is reached.
Also the driver never releases the allocated mod hdr actions and
causing a memleak.
Fix above two issues by moving CT clear mod acts allocation
into the parsing actions phase and only use it when offloading the rule.
The release of mod acts will be done in the normal flow_put().
backtrace:
[<000000007316e2f3>] krealloc+0x83/0xd0
[<00000000ef157de1>] mlx5e_mod_hdr_alloc+0x147/0x300 [mlx5_core]
[<00000000970ce4ae>] mlx5e_tc_match_to_reg_set_and_get_id+0xd7/0x240 [mlx5_core]
[<0000000067c5fa17>] mlx5e_tc_match_to_reg_set+0xa/0x20 [mlx5_core]
[<00000000d032eb98>] mlx5_tc_ct_entry_set_registers.isra.0+0x36/0xc0 [mlx5_core]
[<00000000fd23b869>] mlx5_tc_ct_flow_offload+0x272/0x1f10 [mlx5_core]
[<000000004fc24acc>] mlx5e_tc_offload_fdb_rules.part.0+0x150/0x620 [mlx5_core]
[<00000000dc741c17>] mlx5e_tc_encap_flows_add+0x489/0x690 [mlx5_core]
[<00000000e92e49d7>] mlx5e_rep_update_flows+0x6e4/0x9b0 [mlx5_core]
[<00000000f60f5602>] mlx5e_rep_neigh_update+0x39a/0x5d0 [mlx5_core]
Fixes: 1ef3018f5af3 ("net/mlx5e: CT: Support clear action")
Signed-off-by: Roi Dayan <[email protected]>
Reviewed-by: Paul Blakey <[email protected]>
Reviewed-by: Maor Dickman <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../ethernet/mellanox/mlx5/core/en/tc_ct.c | 26 ++++++++++++-------
.../ethernet/mellanox/mlx5/core/en/tc_ct.h | 2 ++
.../net/ethernet/mellanox/mlx5/core/en_tc.c | 8 ++++--
3 files changed, 25 insertions(+), 11 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/tc_ct.c b/drivers/net/ethernet/mellanox/mlx5/core/en/tc_ct.c
index 6c949abcd2e14..bc65151321ec2 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en/tc_ct.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en/tc_ct.c
@@ -1356,9 +1356,13 @@ mlx5_tc_ct_match_add(struct mlx5_tc_ct_priv *priv,
int
mlx5_tc_ct_parse_action(struct mlx5_tc_ct_priv *priv,
struct mlx5_flow_attr *attr,
+ struct mlx5e_tc_mod_hdr_acts *mod_acts,
const struct flow_action_entry *act,
struct netlink_ext_ack *extack)
{
+ bool clear_action = act->ct.action & TCA_CT_ACT_CLEAR;
+ int err;
+
if (!priv) {
NL_SET_ERR_MSG_MOD(extack,
"offload of ct action isn't available");
@@ -1369,6 +1373,17 @@ mlx5_tc_ct_parse_action(struct mlx5_tc_ct_priv *priv,
attr->ct_attr.ct_action = act->ct.action;
attr->ct_attr.nf_ft = act->ct.flow_table;
+ if (!clear_action)
+ goto out;
+
+ err = mlx5_tc_ct_entry_set_registers(priv, mod_acts, 0, 0, 0, 0);
+ if (err) {
+ NL_SET_ERR_MSG_MOD(extack, "Failed to set registers for ct clear");
+ return err;
+ }
+ attr->action |= MLX5_FLOW_CONTEXT_ACTION_MOD_HDR;
+
+out:
return 0;
}
@@ -1898,23 +1913,16 @@ __mlx5_tc_ct_flow_offload_clear(struct mlx5_tc_ct_priv *ct_priv,
memcpy(pre_ct_attr, attr, attr_sz);
- err = mlx5_tc_ct_entry_set_registers(ct_priv, mod_acts, 0, 0, 0, 0);
- if (err) {
- ct_dbg("Failed to set register for ct clear");
- goto err_set_registers;
- }
-
mod_hdr = mlx5_modify_header_alloc(priv->mdev, ct_priv->ns_type,
mod_acts->num_actions,
mod_acts->actions);
if (IS_ERR(mod_hdr)) {
err = PTR_ERR(mod_hdr);
ct_dbg("Failed to add create ct clear mod hdr");
- goto err_set_registers;
+ goto err_mod_hdr;
}
pre_ct_attr->modify_hdr = mod_hdr;
- pre_ct_attr->action |= MLX5_FLOW_CONTEXT_ACTION_MOD_HDR;
rule = mlx5_tc_rule_insert(priv, orig_spec, pre_ct_attr);
if (IS_ERR(rule)) {
@@ -1930,7 +1938,7 @@ __mlx5_tc_ct_flow_offload_clear(struct mlx5_tc_ct_priv *ct_priv,
err_insert:
mlx5_modify_header_dealloc(priv->mdev, mod_hdr);
-err_set_registers:
+err_mod_hdr:
netdev_warn(priv->netdev,
"Failed to offload ct clear flow, err %d\n", err);
kfree(pre_ct_attr);
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/tc_ct.h b/drivers/net/ethernet/mellanox/mlx5/core/en/tc_ct.h
index 363329f4aac61..99662af1e41a7 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en/tc_ct.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en/tc_ct.h
@@ -110,6 +110,7 @@ int mlx5_tc_ct_add_no_trk_match(struct mlx5_flow_spec *spec);
int
mlx5_tc_ct_parse_action(struct mlx5_tc_ct_priv *priv,
struct mlx5_flow_attr *attr,
+ struct mlx5e_tc_mod_hdr_acts *mod_acts,
const struct flow_action_entry *act,
struct netlink_ext_ack *extack);
@@ -172,6 +173,7 @@ mlx5_tc_ct_add_no_trk_match(struct mlx5_flow_spec *spec)
static inline int
mlx5_tc_ct_parse_action(struct mlx5_tc_ct_priv *priv,
struct mlx5_flow_attr *attr,
+ struct mlx5e_tc_mod_hdr_acts *mod_acts,
const struct flow_action_entry *act,
struct netlink_ext_ack *extack)
{
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
index d2e7b099b83ab..e3b320b6d85b9 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
@@ -3458,7 +3458,9 @@ static int parse_tc_nic_actions(struct mlx5e_priv *priv,
attr->dest_chain = act->chain_index;
break;
case FLOW_ACTION_CT:
- err = mlx5_tc_ct_parse_action(get_ct_priv(priv), attr, act, extack);
+ err = mlx5_tc_ct_parse_action(get_ct_priv(priv), attr,
+ &parse_attr->mod_hdr_acts,
+ act, extack);
if (err)
return err;
@@ -4009,7 +4011,9 @@ static int parse_tc_fdb_actions(struct mlx5e_priv *priv,
NL_SET_ERR_MSG_MOD(extack, "Sample action with connection tracking is not supported");
return -EOPNOTSUPP;
}
- err = mlx5_tc_ct_parse_action(get_ct_priv(priv), attr, act, extack);
+ err = mlx5_tc_ct_parse_action(get_ct_priv(priv), attr,
+ &parse_attr->mod_hdr_acts,
+ act, extack);
if (err)
return err;
--
2.33.0
From: Xin Long <[email protected]>
[ Upstream commit 271351d255b09e39c7f6437738cba595f9b235be ]
The MSG_CRYPTO msgs are always encrypted and sent to other nodes
for keys' deployment. But when receiving in peers, if those nodes
do not validate it and make sure it's encrypted, one could craft
a malicious MSG_CRYPTO msg to deploy its key with no need to know
other nodes' keys.
This patch is to do that by checking TIPC_SKB_CB(skb)->decrypted
and discard it if this packet never got decrypted.
Note that this is also a supplementary fix to CVE-2021-43267 that
can be triggered by an unencrypted malicious MSG_CRYPTO msg.
Fixes: 1ef6f7c9390f ("tipc: add automatic session key exchange")
Acked-by: Ying Xue <[email protected]>
Acked-by: Jon Maloy <[email protected]>
Signed-off-by: Xin Long <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/tipc/link.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/net/tipc/link.c b/net/tipc/link.c
index 1b7a487c88419..09ae8448f394f 100644
--- a/net/tipc/link.c
+++ b/net/tipc/link.c
@@ -1298,8 +1298,11 @@ static bool tipc_data_input(struct tipc_link *l, struct sk_buff *skb,
return false;
#ifdef CONFIG_TIPC_CRYPTO
case MSG_CRYPTO:
- tipc_crypto_msg_rcv(l->net, skb);
- return true;
+ if (TIPC_SKB_CB(skb)->decrypted) {
+ tipc_crypto_msg_rcv(l->net, skb);
+ return true;
+ }
+ fallthrough;
#endif
default:
pr_warn("Dropping received illegal msg type\n");
--
2.33.0
From: Adrian Hunter <[email protected]>
[ Upstream commit 5cb37a26355d79ab290220677b1b57d28e99a895 ]
hba->outstanding_tasks, which is read under host_lock spinlock, tells the
interrupt handler what task management tags are in use by the driver. The
doorbell register bits indicate which tags are in use by the hardware. A
doorbell bit that is 0 is because the bit has yet to be set by the driver,
or because the task is complete. It is only possible to disambiguate the 2
cases, if reading/writing the doorbell register is synchronized with
reading/writing hba->outstanding_tasks.
For that reason, reading REG_UTP_TASK_REQ_DOOR_BELL must be done under
spinlock.
Link: https://lore.kernel.org/r/[email protected]
Fixes: f5ef336fd2e4 ("scsi: ufs: core: Fix task management completion")
Reviewed-by: Bart Van Assche <[email protected]>
Signed-off-by: Adrian Hunter <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/ufs/ufshcd.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 3d0da8b3fed8a..55f2e4d6f10b7 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -6382,9 +6382,8 @@ static irqreturn_t ufshcd_tmc_handler(struct ufs_hba *hba)
irqreturn_t ret = IRQ_NONE;
int tag;
- pending = ufshcd_readl(hba, REG_UTP_TASK_REQ_DOOR_BELL);
-
spin_lock_irqsave(hba->host->host_lock, flags);
+ pending = ufshcd_readl(hba, REG_UTP_TASK_REQ_DOOR_BELL);
issued = hba->outstanding_tasks & ~pending;
for_each_set_bit(tag, &issued, hba->nutmrs) {
struct request *req = hba->tmf_rqs[tag];
--
2.33.0
From: Piotr Marczak <[email protected]>
[ Upstream commit 8905072a192fffe9389255489db250c73ecab008 ]
The driver could only quit allmulti when allmulti and promisc modes are
turn on at the same time. If promisc had been off there was no way to turn
off allmulti mode.
The patch corrects this behavior. Switching allmulti does not depends on
promisc state mode anymore
Fixes: f42a5c74da99 ("i40e: Add allmulti support for the VF")
Signed-off-by: Piotr Marczak <[email protected]>
Tested-by: Tony Brelinski <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/iavf/iavf_main.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/intel/iavf/iavf_main.c b/drivers/net/ethernet/intel/iavf/iavf_main.c
index f64ccf6286ec1..44ea67cb3716b 100644
--- a/drivers/net/ethernet/intel/iavf/iavf_main.c
+++ b/drivers/net/ethernet/intel/iavf/iavf_main.c
@@ -1630,8 +1630,7 @@ static int iavf_process_aq_command(struct iavf_adapter *adapter)
iavf_set_promiscuous(adapter, FLAG_VF_MULTICAST_PROMISC);
return 0;
}
-
- if ((adapter->aq_required & IAVF_FLAG_AQ_RELEASE_PROMISC) &&
+ if ((adapter->aq_required & IAVF_FLAG_AQ_RELEASE_PROMISC) ||
(adapter->aq_required & IAVF_FLAG_AQ_RELEASE_ALLMULTI)) {
iavf_set_promiscuous(adapter, 0);
return 0;
--
2.33.0
From: Dan Carpenter <[email protected]>
[ Upstream commit c7521d3aa2fa7fc785682758c99b5bcae503f6be ]
The ptp_ocp_get_mem() function does not return NULL, it returns error
pointers.
Fixes: 773bda964921 ("ptp: ocp: Expose various resources on the timecard.")
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/ptp/ptp_ocp.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/ptp/ptp_ocp.c b/drivers/ptp/ptp_ocp.c
index caf9b37c5eb1e..e238ae8e94709 100644
--- a/drivers/ptp/ptp_ocp.c
+++ b/drivers/ptp/ptp_ocp.c
@@ -1049,10 +1049,11 @@ ptp_ocp_register_ext(struct ptp_ocp *bp, struct ocp_resource *r)
if (!ext)
return -ENOMEM;
- err = -EINVAL;
ext->mem = ptp_ocp_get_mem(bp, r);
- if (!ext->mem)
+ if (IS_ERR(ext->mem)) {
+ err = PTR_ERR(ext->mem);
goto out;
+ }
ext->bp = bp;
ext->info = r->extra;
@@ -1122,8 +1123,8 @@ ptp_ocp_register_mem(struct ptp_ocp *bp, struct ocp_resource *r)
void __iomem *mem;
mem = ptp_ocp_get_mem(bp, r);
- if (!mem)
- return -EINVAL;
+ if (IS_ERR(mem))
+ return PTR_ERR(mem);
bp_assign_entry(bp, r, mem);
--
2.33.0
From: Sohaib Mohamed <[email protected]>
[ Upstream commit 92723ea0f11d92496687db8c9725248e9d1e5e1d ]
ASan reports memory leaks while running:
$ perf bench sched all
Fixes: e27454cc6352c422 ("perf bench: Add sched-messaging.c: Benchmark for scheduler and IPC mechanisms based on hackbench")
Signed-off-by: Sohaib Mohamed <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Hitoshi Mitake <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Paul Russel <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Pierre Gondois <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/perf/bench/sched-messaging.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/tools/perf/bench/sched-messaging.c b/tools/perf/bench/sched-messaging.c
index 488f6e6ba1a55..fa0ff4ce2b749 100644
--- a/tools/perf/bench/sched-messaging.c
+++ b/tools/perf/bench/sched-messaging.c
@@ -223,6 +223,8 @@ static unsigned int group(pthread_t *pth,
snd_ctx->out_fds[i] = fds[1];
if (!thread_mode)
close(fds[0]);
+
+ free(ctx);
}
/* Now we have all the fds, fork the senders */
@@ -239,6 +241,8 @@ static unsigned int group(pthread_t *pth,
for (i = 0; i < num_fds; i++)
close(snd_ctx->out_fds[i]);
+ free(snd_ctx);
+
/* Return number of children to reap */
return num_fds * 2;
}
--
2.33.0
From: Andreas Schwab <[email protected]>
[ Upstream commit 5a19c7e06236a9c55dfc001bb4d1a8f1950d23e7 ]
When building external modules, vdso_prepare should not be run. If the
kernel sources are read-only, it will fail.
Fixes: fde9c59aebaf ("riscv: explicitly use symbol offsets for VDSO")
Signed-off-by: Andreas Schwab <[email protected]>
Reviewed-by: Nathan Chancellor <[email protected]>
Tested-by: Nathan Chancellor <[email protected]>
Signed-off-by: Palmer Dabbelt <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/riscv/Makefile | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile
index 0eb4568fbd290..41f3a75fe2ec8 100644
--- a/arch/riscv/Makefile
+++ b/arch/riscv/Makefile
@@ -108,11 +108,13 @@ PHONY += vdso_install
vdso_install:
$(Q)$(MAKE) $(build)=arch/riscv/kernel/vdso $@
+ifeq ($(KBUILD_EXTMOD),)
ifeq ($(CONFIG_MMU),y)
prepare: vdso_prepare
vdso_prepare: prepare0
$(Q)$(MAKE) $(build)=arch/riscv/kernel/vdso include/generated/vdso-offsets.h
endif
+endif
ifneq ($(CONFIG_XIP_KERNEL),y)
ifeq ($(CONFIG_RISCV_M_MODE)$(CONFIG_SOC_CANAAN),yy)
--
2.33.0
From: Masahiro Yamada <[email protected]>
[ Upstream commit 964c33cd0be621b291b5d253d8731eb2680082cb ]
Since commit bce74491c300 ("powerpc/vdso: fix unnecessary rebuilds of
vgettimeofday.o"), "make ARCH=powerpc clean" does not clean up the
arch/powerpc/kernel/{vdso32,vdso64} directories.
Use the subdir- trick to let "make clean" descend into them.
Fixes: bce74491c300 ("powerpc/vdso: fix unnecessary rebuilds of vgettimeofday.o")
Signed-off-by: Masahiro Yamada <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/kernel/Makefile | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index 7be36c1e1db6d..86e40db2dec56 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -196,3 +196,6 @@ clean-files := vmlinux.lds
# Force dependency (incbin is bad)
$(obj)/vdso32_wrapper.o : $(obj)/vdso32/vdso32.so.dbg
$(obj)/vdso64_wrapper.o : $(obj)/vdso64/vdso64.so.dbg
+
+# for cleaning
+subdir- += vdso32 vdso64
--
2.33.0
From: Mike Christie <[email protected]>
[ Upstream commit 4edd8cd4e86dd3047e5294bbefcc0a08f66a430f ]
This fixes a regression added with:
commit f0f82e2476f6 ("scsi: core: Fix capacity set to zero after
offlinining device")
The problem is that after iSCSI recovery, iscsid will call into the kernel
to set the dev's state to running, and with that patch we now call
scsi_rescan_device() with the state_mutex held. If the SCSI error handler
thread is just starting to test the device in scsi_send_eh_cmnd() then it's
going to try to grab the state_mutex.
We are then stuck, because when scsi_rescan_device() tries to send its I/O
scsi_queue_rq() calls -> scsi_host_queue_ready() -> scsi_host_in_recovery()
which will return true (the host state is still in recovery) and I/O will
just be requeued. scsi_send_eh_cmnd() will then never be able to grab the
state_mutex to finish error handling.
To prevent the deadlock move the rescan-related code to after we drop the
state_mutex.
This also adds a check for if we are already in the running state. This
prevents extra scans and helps the iscsid case where if the transport class
has already onlined the device during its recovery process then we don't
need userspace to do it again plus possibly block that daemon.
Link: https://lore.kernel.org/r/[email protected]
Fixes: f0f82e2476f6 ("scsi: core: Fix capacity set to zero after offlinining device")
Cc: Bart Van Assche <[email protected]>
Cc: lijinlin <[email protected]>
Cc: Wu Bo <[email protected]>
Reviewed-by: Lee Duncan <[email protected]>
Reviewed-by: Wu Bo <[email protected]>
Signed-off-by: Mike Christie <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/scsi_sysfs.c | 30 +++++++++++++++++++-----------
1 file changed, 19 insertions(+), 11 deletions(-)
diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
index 8bb79ccc9a8b5..9527e734a999a 100644
--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -797,6 +797,7 @@ store_state_field(struct device *dev, struct device_attribute *attr,
int i, ret;
struct scsi_device *sdev = to_scsi_device(dev);
enum scsi_device_state state = 0;
+ bool rescan_dev = false;
for (i = 0; i < ARRAY_SIZE(sdev_states); i++) {
const int len = strlen(sdev_states[i].name);
@@ -815,20 +816,27 @@ store_state_field(struct device *dev, struct device_attribute *attr,
}
mutex_lock(&sdev->state_mutex);
- ret = scsi_device_set_state(sdev, state);
- /*
- * If the device state changes to SDEV_RUNNING, we need to
- * run the queue to avoid I/O hang, and rescan the device
- * to revalidate it. Running the queue first is necessary
- * because another thread may be waiting inside
- * blk_mq_freeze_queue_wait() and because that call may be
- * waiting for pending I/O to finish.
- */
- if (ret == 0 && state == SDEV_RUNNING) {
+ if (sdev->sdev_state == SDEV_RUNNING && state == SDEV_RUNNING) {
+ ret = count;
+ } else {
+ ret = scsi_device_set_state(sdev, state);
+ if (ret == 0 && state == SDEV_RUNNING)
+ rescan_dev = true;
+ }
+ mutex_unlock(&sdev->state_mutex);
+
+ if (rescan_dev) {
+ /*
+ * If the device state changes to SDEV_RUNNING, we need to
+ * run the queue to avoid I/O hang, and rescan the device
+ * to revalidate it. Running the queue first is necessary
+ * because another thread may be waiting inside
+ * blk_mq_freeze_queue_wait() and because that call may be
+ * waiting for pending I/O to finish.
+ */
blk_mq_run_hw_queues(sdev->request_queue, true);
scsi_rescan_device(dev);
}
- mutex_unlock(&sdev->state_mutex);
return ret == 0 ? count : -EINVAL;
}
--
2.33.0
From: Bart Van Assche <[email protected]>
[ Upstream commit 3ff1f6b6ba6f97f50862aa50e79959cc8ddc2566 ]
The following has been observed on a test setup:
WARNING: CPU: 4 PID: 250 at drivers/scsi/ufs/ufshcd.c:2737 ufshcd_queuecommand+0x468/0x65c
Call trace:
ufshcd_queuecommand+0x468/0x65c
scsi_send_eh_cmnd+0x224/0x6a0
scsi_eh_test_devices+0x248/0x418
scsi_eh_ready_devs+0xc34/0xe58
scsi_error_handler+0x204/0x80c
kthread+0x150/0x1b4
ret_from_fork+0x10/0x30
That warning is triggered by the following statement:
WARN_ON(lrbp->cmd);
Fix this warning by clearing lrbp->cmd from the abort handler.
Link: https://lore.kernel.org/r/[email protected]
Fixes: 7a3e97b0dc4b ("[SCSI] ufshcd: UFS Host controller driver")
Reviewed-by: Bean Huo <[email protected]>
Reviewed-by: Stanley Chu <[email protected]>
Signed-off-by: Bart Van Assche <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/ufs/ufshcd.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 20705cec83c55..325a15186e950 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -7040,6 +7040,7 @@ static int ufshcd_abort(struct scsi_cmnd *cmd)
goto release;
}
+ lrbp->cmd = NULL;
err = SUCCESS;
release:
--
2.33.0
From: Jedrzej Jagielski <[email protected]>
[ Upstream commit 2e6d218c1ec6fb9cd70693b78134cbc35ae0b5a9 ]
Reject TCs creation with proper message if the first queue
assignment is not equal to the power of two.
The first queue number was checked too late in the second queue
iteration, if second queue was configured at all. Now if first queue value
is not a power of two, then trying to create qdisc will be rejected.
Fixes: 8f88b3034db3 ("i40e: Add infrastructure for queue channel support")
Signed-off-by: Grzegorz Szczurek <[email protected]>
Signed-off-by: Jedrzej Jagielski <[email protected]>
Tested-by: Tony Brelinski <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/i40e/i40e_main.c | 59 +++++++--------------
1 file changed, 19 insertions(+), 40 deletions(-)
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 42e26ee5b6d5f..83413999902e5 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -5786,24 +5786,6 @@ static void i40e_remove_queue_channels(struct i40e_vsi *vsi)
INIT_LIST_HEAD(&vsi->ch_list);
}
-/**
- * i40e_is_any_channel - channel exist or not
- * @vsi: ptr to VSI to which channels are associated with
- *
- * Returns true or false if channel(s) exist for associated VSI or not
- **/
-static bool i40e_is_any_channel(struct i40e_vsi *vsi)
-{
- struct i40e_channel *ch, *ch_tmp;
-
- list_for_each_entry_safe(ch, ch_tmp, &vsi->ch_list, list) {
- if (ch->initialized)
- return true;
- }
-
- return false;
-}
-
/**
* i40e_get_max_queues_for_channel
* @vsi: ptr to VSI to which channels are associated with
@@ -6310,26 +6292,15 @@ int i40e_create_queue_channel(struct i40e_vsi *vsi,
/* By default we are in VEPA mode, if this is the first VF/VMDq
* VSI to be added switch to VEB mode.
*/
- if ((!(pf->flags & I40E_FLAG_VEB_MODE_ENABLED)) ||
- (!i40e_is_any_channel(vsi))) {
- if (!is_power_of_2(vsi->tc_config.tc_info[0].qcount)) {
- dev_dbg(&pf->pdev->dev,
- "Failed to create channel. Override queues (%u) not power of 2\n",
- vsi->tc_config.tc_info[0].qcount);
- return -EINVAL;
- }
- if (!(pf->flags & I40E_FLAG_VEB_MODE_ENABLED)) {
- pf->flags |= I40E_FLAG_VEB_MODE_ENABLED;
+ if (!(pf->flags & I40E_FLAG_VEB_MODE_ENABLED)) {
+ pf->flags |= I40E_FLAG_VEB_MODE_ENABLED;
- if (vsi->type == I40E_VSI_MAIN) {
- if (pf->flags & I40E_FLAG_TC_MQPRIO)
- i40e_do_reset(pf, I40E_PF_RESET_FLAG,
- true);
- else
- i40e_do_reset_safe(pf,
- I40E_PF_RESET_FLAG);
- }
+ if (vsi->type == I40E_VSI_MAIN) {
+ if (pf->flags & I40E_FLAG_TC_MQPRIO)
+ i40e_do_reset(pf, I40E_PF_RESET_FLAG, true);
+ else
+ i40e_do_reset_safe(pf, I40E_PF_RESET_FLAG);
}
/* now onwards for main VSI, number of queues will be value
* of TC0's queue count
@@ -7982,12 +7953,20 @@ config_tc:
vsi->seid);
need_reset = true;
goto exit;
- } else {
- dev_info(&vsi->back->pdev->dev,
- "Setup channel (id:%u) utilizing num_queues %d\n",
- vsi->seid, vsi->tc_config.tc_info[0].qcount);
+ } else if (enabled_tc &&
+ (!is_power_of_2(vsi->tc_config.tc_info[0].qcount))) {
+ netdev_info(netdev,
+ "Failed to create channel. Override queues (%u) not power of 2\n",
+ vsi->tc_config.tc_info[0].qcount);
+ ret = -EINVAL;
+ need_reset = true;
+ goto exit;
}
+ dev_info(&vsi->back->pdev->dev,
+ "Setup channel (id:%u) utilizing num_queues %d\n",
+ vsi->seid, vsi->tc_config.tc_info[0].qcount);
+
if (pf->flags & I40E_FLAG_TC_MQPRIO) {
if (vsi->mqprio_qopt.max_rate[0]) {
u64 max_tx_rate = vsi->mqprio_qopt.max_rate[0];
--
2.33.0
From: Jesse Brandeburg <[email protected]>
[ Upstream commit 5d2ca2e12dfb2aff3388ca57b06f570fa6206ced ]
As reported in [1], e100 was no longer working for suspend/resume
cycles. The previous commit mentioned in the fixes appears to have
broken things and this attempts to practice best known methods for
device power management and keep wake-up working while allowing
suspend/resume to work. To do this, I reorder a little bit of code
and fix the resume path to make sure the device is enabled.
[1] https://bugzilla.kernel.org/show_bug.cgi?id=214933
Fixes: 69a74aef8a18 ("e100: use generic power management")
Cc: Vaibhav Gupta <[email protected]>
Reported-by: Alexey Kuznetsov <[email protected]>
Signed-off-by: Jesse Brandeburg <[email protected]>
Tested-by: Alexey Kuznetsov <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/e100.c | 18 +++++++++++++-----
1 file changed, 13 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ethernet/intel/e100.c b/drivers/net/ethernet/intel/e100.c
index 09ae1939e6db4..36d52246bdc66 100644
--- a/drivers/net/ethernet/intel/e100.c
+++ b/drivers/net/ethernet/intel/e100.c
@@ -3003,9 +3003,10 @@ static void __e100_shutdown(struct pci_dev *pdev, bool *enable_wake)
struct net_device *netdev = pci_get_drvdata(pdev);
struct nic *nic = netdev_priv(netdev);
+ netif_device_detach(netdev);
+
if (netif_running(netdev))
e100_down(nic);
- netif_device_detach(netdev);
if ((nic->flags & wol_magic) | e100_asf(nic)) {
/* enable reverse auto-negotiation */
@@ -3022,7 +3023,7 @@ static void __e100_shutdown(struct pci_dev *pdev, bool *enable_wake)
*enable_wake = false;
}
- pci_clear_master(pdev);
+ pci_disable_device(pdev);
}
static int __e100_power_off(struct pci_dev *pdev, bool wake)
@@ -3042,8 +3043,6 @@ static int __maybe_unused e100_suspend(struct device *dev_d)
__e100_shutdown(to_pci_dev(dev_d), &wake);
- device_wakeup_disable(dev_d);
-
return 0;
}
@@ -3051,6 +3050,14 @@ static int __maybe_unused e100_resume(struct device *dev_d)
{
struct net_device *netdev = dev_get_drvdata(dev_d);
struct nic *nic = netdev_priv(netdev);
+ int err;
+
+ err = pci_enable_device(to_pci_dev(dev_d));
+ if (err) {
+ netdev_err(netdev, "Resume cannot enable PCI device, aborting\n");
+ return err;
+ }
+ pci_set_master(to_pci_dev(dev_d));
/* disable reverse auto-negotiation */
if (nic->phy == phy_82552_v) {
@@ -3062,10 +3069,11 @@ static int __maybe_unused e100_resume(struct device *dev_d)
smartspeed & ~(E100_82552_REV_ANEG));
}
- netif_device_attach(netdev);
if (netif_running(netdev))
e100_up(nic);
+ netif_device_attach(netdev);
+
return 0;
}
--
2.33.0
From: Arnaldo Carvalho de Melo <[email protected]>
[ Upstream commit e8c04ea0fef5731dbcaabac86d65254c227aedf4 ]
The patch removing the feature-sync-compare-and-swap feature detection
didn't remove the call to main_test_sync_compare_and_swap(), making the
'test-all' case fail an all the feature tests to be performed
individually:
$ cat /tmp/build/perf/feature/test-all.make.output
In file included from test-all.c:18:
test-libpython-version.c:5:10: error: #error
5 | #error
| ^~~~~
test-all.c: In function ‘main’:
test-all.c:203:9: error: implicit declaration of function ‘main_test_sync_compare_and_swap’ [-Werror=implicit-function-declaration]
203 | main_test_sync_compare_and_swap(argc, argv);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
$
Fix it, now to figure out what is that test-libpython-version.c
problem...
Fixes: 60fa754b2a5a4e0c ("tools: Remove feature-sync-compare-and-swap feature detection")
Cc: Jiri Olsa <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mathieu Poirier <[email protected]>
Cc: Mike Leach <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/build/feature/test-all.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/tools/build/feature/test-all.c b/tools/build/feature/test-all.c
index 9204395272912..0b243ce842be3 100644
--- a/tools/build/feature/test-all.c
+++ b/tools/build/feature/test-all.c
@@ -200,7 +200,6 @@ int main(int argc, char *argv[])
main_test_timerfd();
main_test_stackprotector_all();
main_test_libdw_dwarf_unwind();
- main_test_sync_compare_and_swap(argc, argv);
main_test_zlib();
main_test_pthread_attr_setaffinity_np();
main_test_pthread_barrier();
--
2.33.0
From: Marcin Wojtas <[email protected]>
[ Upstream commit 2460386bef0b9b98b71728d3c173e15558b78d82 ]
The kernel test robot reported a following issue:
>> drivers/net/ethernet/marvell/mvmdio.c:426:36: warning:
unused variable 'orion_mdio_acpi_match' [-Wunused-const-variable]
static const struct acpi_device_id orion_mdio_acpi_match[] = {
^
1 warning generated.
Fix that by surrounding the variable by appropriate ifdef.
Fixes: c54da4c1acb1 ("net: mvmdio: add ACPI support")
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Marcin Wojtas <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/marvell/mvmdio.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/ethernet/marvell/mvmdio.c b/drivers/net/ethernet/marvell/mvmdio.c
index 62a97c46fba05..ef878973b8597 100644
--- a/drivers/net/ethernet/marvell/mvmdio.c
+++ b/drivers/net/ethernet/marvell/mvmdio.c
@@ -429,12 +429,14 @@ static const struct of_device_id orion_mdio_match[] = {
};
MODULE_DEVICE_TABLE(of, orion_mdio_match);
+#ifdef CONFIG_ACPI
static const struct acpi_device_id orion_mdio_acpi_match[] = {
{ "MRVL0100", BUS_TYPE_SMI },
{ "MRVL0101", BUS_TYPE_XSMI },
{ },
};
MODULE_DEVICE_TABLE(acpi, orion_mdio_acpi_match);
+#endif
static struct platform_driver orion_mdio_driver = {
.probe = orion_mdio_probe,
--
2.33.0
From: Lin Ma <[email protected]>
[ Upstream commit 3e3b5dfcd16a3e254aab61bd1e8c417dd4503102 ]
There is a potential UAF between the unregistration routine and the NFC
netlink operations.
The race that cause that UAF can be shown as below:
(FREE) | (USE)
nfcmrvl_nci_unregister_dev | nfc_genl_dev_up
nci_close_device |
nci_unregister_device | nfc_get_device
nfc_unregister_device | nfc_dev_up
rfkill_destory |
device_del | rfkill_blocked
... | ...
The root cause for this race is concluded below:
1. The rfkill_blocked (USE) in nfc_dev_up is supposed to be placed after
the device_is_registered check.
2. Since the netlink operations are possible just after the device_add
in nfc_register_device, the nfc_dev_up() can happen anywhere during the
rfkill creation process, which leads to data race.
This patch reorder these actions to permit
1. Once device_del is finished, the nfc_dev_up cannot dereference the
rfkill object.
2. The rfkill_register need to be placed after the device_add of nfc_dev
because the parent device need to be created first. So this patch keeps
the order but inject device_lock to prevent the data race.
Signed-off-by: Lin Ma <[email protected]>
Fixes: be055b2f89b5 ("NFC: RFKILL support")
Reviewed-by: Jakub Kicinski <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/nfc/core.c | 32 ++++++++++++++++++--------------
1 file changed, 18 insertions(+), 14 deletions(-)
diff --git a/net/nfc/core.c b/net/nfc/core.c
index 3c645c1d99c9b..dc7a2404efdf9 100644
--- a/net/nfc/core.c
+++ b/net/nfc/core.c
@@ -94,13 +94,13 @@ int nfc_dev_up(struct nfc_dev *dev)
device_lock(&dev->dev);
- if (dev->rfkill && rfkill_blocked(dev->rfkill)) {
- rc = -ERFKILL;
+ if (!device_is_registered(&dev->dev)) {
+ rc = -ENODEV;
goto error;
}
- if (!device_is_registered(&dev->dev)) {
- rc = -ENODEV;
+ if (dev->rfkill && rfkill_blocked(dev->rfkill)) {
+ rc = -ERFKILL;
goto error;
}
@@ -1125,11 +1125,7 @@ int nfc_register_device(struct nfc_dev *dev)
if (rc)
pr_err("Could not register llcp device\n");
- rc = nfc_genl_device_added(dev);
- if (rc)
- pr_debug("The userspace won't be notified that the device %s was added\n",
- dev_name(&dev->dev));
-
+ device_lock(&dev->dev);
dev->rfkill = rfkill_alloc(dev_name(&dev->dev), &dev->dev,
RFKILL_TYPE_NFC, &nfc_rfkill_ops, dev);
if (dev->rfkill) {
@@ -1138,6 +1134,12 @@ int nfc_register_device(struct nfc_dev *dev)
dev->rfkill = NULL;
}
}
+ device_unlock(&dev->dev);
+
+ rc = nfc_genl_device_added(dev);
+ if (rc)
+ pr_debug("The userspace won't be notified that the device %s was added\n",
+ dev_name(&dev->dev));
return 0;
}
@@ -1154,10 +1156,17 @@ void nfc_unregister_device(struct nfc_dev *dev)
pr_debug("dev_name=%s\n", dev_name(&dev->dev));
+ rc = nfc_genl_device_removed(dev);
+ if (rc)
+ pr_debug("The userspace won't be notified that the device %s "
+ "was removed\n", dev_name(&dev->dev));
+
+ device_lock(&dev->dev);
if (dev->rfkill) {
rfkill_unregister(dev->rfkill);
rfkill_destroy(dev->rfkill);
}
+ device_unlock(&dev->dev);
if (dev->ops->check_presence) {
device_lock(&dev->dev);
@@ -1167,11 +1176,6 @@ void nfc_unregister_device(struct nfc_dev *dev)
cancel_work_sync(&dev->check_pres_work);
}
- rc = nfc_genl_device_removed(dev);
- if (rc)
- pr_debug("The userspace won't be notified that the device %s "
- "was removed\n", dev_name(&dev->dev));
-
nfc_llcp_unregister_device(dev);
mutex_lock(&nfc_devlist_mutex);
--
2.33.0
From: Lin Ma <[email protected]>
[ Upstream commit 86cdf8e38792545161dbe3350a7eced558ba4d15 ]
There is a possible data race as shown below:
thread-A in nci_request() | thread-B in nci_close_device()
| mutex_lock(&ndev->req_lock);
test_bit(NCI_UP, &ndev->flags); |
... | test_and_clear_bit(NCI_UP, &ndev->flags)
mutex_lock(&ndev->req_lock); |
|
This race will allow __nci_request() to be awaked while the device is
getting removed.
Similar to commit e2cb6b891ad2 ("bluetooth: eliminate the potential race
condition when removing the HCI controller"). this patch alters the
function sequence in nci_request() to prevent the data races between the
nci_close_device().
Signed-off-by: Lin Ma <[email protected]>
Fixes: 6a2968aaf50c ("NFC: basic NCI protocol implementation")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/nfc/nci/core.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
diff --git a/net/nfc/nci/core.c b/net/nfc/nci/core.c
index 82ab39d80726e..39994dbb6a55b 100644
--- a/net/nfc/nci/core.c
+++ b/net/nfc/nci/core.c
@@ -144,12 +144,15 @@ inline int nci_request(struct nci_dev *ndev,
{
int rc;
- if (!test_bit(NCI_UP, &ndev->flags))
- return -ENETDOWN;
-
/* Serialize all requests */
mutex_lock(&ndev->req_lock);
- rc = __nci_request(ndev, req, opt, timeout);
+ /* check the state after obtaing the lock against any races
+ * from nci_close_device when the device gets removed.
+ */
+ if (test_bit(NCI_UP, &ndev->flags))
+ rc = __nci_request(ndev, req, opt, timeout);
+ else
+ rc = -ENETDOWN;
mutex_unlock(&ndev->req_lock);
return rc;
--
2.33.0
From: Nicholas Piggin <[email protected]>
[ Upstream commit 302039466f6a3b9421ecb9a6a2c528801dc24a86 ]
In case the FORM2 distance table from firmware is not the expected size,
there is fallback code that just populates the lookup table as local vs
remote.
However it then continues on to use the distance table. Fix.
Fixes: 1c6b5a7e7405 ("powerpc/pseries: Add support for FORM2 associativity")
Signed-off-by: Nicholas Piggin <[email protected]>
Reviewed-by: Aneesh Kumar K.V <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/mm/numa.c | 28 ++++++++++++----------------
1 file changed, 12 insertions(+), 16 deletions(-)
diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index 53e9901409163..59d3cfcd78879 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -407,30 +407,26 @@ static void initialize_form2_numa_distance_lookup_table(void)
if (form2_distances_length != max_numa_index * max_numa_index) {
WARN(1, "Wrong NUMA distance information\n");
- /* consider everybody else just remote. */
- for (i = 0; i < max_numa_index; i++) {
- for (j = 0; j < max_numa_index; j++) {
- int nodeA = numa_id_index_table[i];
- int nodeB = numa_id_index_table[j];
-
- if (nodeA == nodeB)
- numa_distance_table[nodeA][nodeB] = LOCAL_DISTANCE;
- else
- numa_distance_table[nodeA][nodeB] = REMOTE_DISTANCE;
- }
- }
+ form2_distances = NULL; // don't use it
}
-
distance_index = 0;
for (i = 0; i < max_numa_index; i++) {
for (j = 0; j < max_numa_index; j++) {
int nodeA = numa_id_index_table[i];
int nodeB = numa_id_index_table[j];
-
- numa_distance_table[nodeA][nodeB] = form2_distances[distance_index++];
- pr_debug("dist[%d][%d]=%d ", nodeA, nodeB, numa_distance_table[nodeA][nodeB]);
+ int dist;
+
+ if (form2_distances)
+ dist = form2_distances[distance_index++];
+ else if (nodeA == nodeB)
+ dist = LOCAL_DISTANCE;
+ else
+ dist = REMOTE_DISTANCE;
+ numa_distance_table[nodeA][nodeB] = dist;
+ pr_debug("dist[%d][%d]=%d ", nodeA, nodeB, dist);
}
}
+
of_node_put(root);
}
--
2.33.0
From: Nicholas Piggin <[email protected]>
[ Upstream commit 0bd81274e3f1195ee7c820ef02d62f31077c42c3 ]
The name of the local variable holding the "form2" property address
conflicts with the numa_distance_table global.
This patch does 's/numa_dist_table/form2_distances/g' over the function,
which also renames numa_dist_table_length to form2_distances_length.
Suggested-by: Michael Ellerman <[email protected]>
Signed-off-by: Nicholas Piggin <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/mm/numa.c | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index 6f14c8fb6359d..53e9901409163 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -376,9 +376,9 @@ static void initialize_form2_numa_distance_lookup_table(void)
{
int i, j;
struct device_node *root;
- const __u8 *numa_dist_table;
+ const __u8 *form2_distances;
const __be32 *numa_lookup_index;
- int numa_dist_table_length;
+ int form2_distances_length;
int max_numa_index, distance_index;
if (firmware_has_feature(FW_FEATURE_OPAL))
@@ -392,20 +392,20 @@ static void initialize_form2_numa_distance_lookup_table(void)
max_numa_index = of_read_number(&numa_lookup_index[0], 1);
/* first element of the array is the size and is encode-int */
- numa_dist_table = of_get_property(root, "ibm,numa-distance-table", NULL);
- numa_dist_table_length = of_read_number((const __be32 *)&numa_dist_table[0], 1);
+ form2_distances = of_get_property(root, "ibm,numa-distance-table", NULL);
+ form2_distances_length = of_read_number((const __be32 *)&form2_distances[0], 1);
/* Skip the size which is encoded int */
- numa_dist_table += sizeof(__be32);
+ form2_distances += sizeof(__be32);
- pr_debug("numa_dist_table_len = %d, numa_dist_indexes_len = %d\n",
- numa_dist_table_length, max_numa_index);
+ pr_debug("form2_distances_len = %d, numa_dist_indexes_len = %d\n",
+ form2_distances_length, max_numa_index);
for (i = 0; i < max_numa_index; i++)
/* +1 skip the max_numa_index in the property */
numa_id_index_table[i] = of_read_number(&numa_lookup_index[i + 1], 1);
- if (numa_dist_table_length != max_numa_index * max_numa_index) {
+ if (form2_distances_length != max_numa_index * max_numa_index) {
WARN(1, "Wrong NUMA distance information\n");
/* consider everybody else just remote. */
for (i = 0; i < max_numa_index; i++) {
@@ -427,7 +427,7 @@ static void initialize_form2_numa_distance_lookup_table(void)
int nodeA = numa_id_index_table[i];
int nodeB = numa_id_index_table[j];
- numa_distance_table[nodeA][nodeB] = numa_dist_table[distance_index++];
+ numa_distance_table[nodeA][nodeB] = form2_distances[distance_index++];
pr_debug("dist[%d][%d]=%d ", nodeA, nodeB, numa_distance_table[nodeA][nodeB]);
}
}
--
2.33.0
From: Michael Ellerman <[email protected]>
[ Upstream commit dae581864609d36fb58855fd59880b4941ce9d14 ]
kvmppc_h_set_dabr(), and kvmppc_h_set_xdabr() which jumps into
it, need to use _GLOBAL_TOC to setup the kernel TOC pointer, because
kvmppc_h_set_dabr() uses LOAD_REG_ADDR() to load dawr_force_enable.
When called from hcall_try_real_mode() we have the kernel TOC in r2,
established near the start of kvmppc_interrupt_hv(), so there is no
issue.
But they can also be called from kvmppc_pseries_do_hcall() which is
module code, so the access ends up happening with the kvm-hv module's
r2, which will not point at dawr_force_enable and could even cause a
fault.
With the current code layout and compilers we haven't observed a fault
in practice, the load hits somewhere in kvm-hv.ko and silently returns
some bogus value.
Note that we we expect p8/p9 guests to use the DAWR, but SLOF uses
h_set_dabr() to test if sc1 works correctly, see SLOF's
lib/libhvcall/brokensc1.c.
Fixes: c1fe190c0672 ("powerpc: Add force enable of DAWR on P9 option")
Signed-off-by: Michael Ellerman <[email protected]>
Reviewed-by: Daniel Axtens <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/powerpc/kvm/book3s_hv_rmhandlers.S | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
index eb776d0c5d8e9..32a4b4d412b92 100644
--- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S
+++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
@@ -2005,7 +2005,7 @@ hcall_real_table:
.globl hcall_real_table_end
hcall_real_table_end:
-_GLOBAL(kvmppc_h_set_xdabr)
+_GLOBAL_TOC(kvmppc_h_set_xdabr)
EXPORT_SYMBOL_GPL(kvmppc_h_set_xdabr)
andi. r0, r5, DABRX_USER | DABRX_KERNEL
beq 6f
@@ -2015,7 +2015,7 @@ EXPORT_SYMBOL_GPL(kvmppc_h_set_xdabr)
6: li r3, H_PARAMETER
blr
-_GLOBAL(kvmppc_h_set_dabr)
+_GLOBAL_TOC(kvmppc_h_set_dabr)
EXPORT_SYMBOL_GPL(kvmppc_h_set_dabr)
li r5, DABRX_USER | DABRX_KERNEL
3:
--
2.33.0
From: Bjorn Andersson <[email protected]>
[ Upstream commit 3a3a100473d2f6ebf9bdfe6efedd7e18de724388 ]
It has been observed that dual edge triggered wakeirq GPIOs on SDM845
doesn't trigger interrupts on the falling edge.
Enabling wakeirq_dual_edge_errata for SDM845 indicates that the PDC in
SDM845 suffers from the same problem described, and worked around, by
Doug in 'c3c0c2e18d94 ("pinctrl: qcom: Handle broken/missing PDC dual
edge IRQs on sc7180")', so enable the workaround for SDM845 as well.
The specific problem seen without this is that gpio-keys does not detect
the falling edge of the LID gpio on the Lenovo Yoga C630 and as such
consistently reports the LID as closed.
Fixes: e35a6ae0eb3a ("pinctrl/msm: Setup GPIO chip in hierarchy")
Signed-off-by: Bjorn Andersson <[email protected]>
Tested-By: Steev Klimaszewski <[email protected]>
Reviewed-by: Douglas Anderson <[email protected]>
Reviewed-by: Stephen Boyd <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pinctrl/qcom/pinctrl-sdm845.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/pinctrl/qcom/pinctrl-sdm845.c b/drivers/pinctrl/qcom/pinctrl-sdm845.c
index c51793f6546f1..fdfd7b8f3a76d 100644
--- a/drivers/pinctrl/qcom/pinctrl-sdm845.c
+++ b/drivers/pinctrl/qcom/pinctrl-sdm845.c
@@ -1310,6 +1310,7 @@ static const struct msm_pinctrl_soc_data sdm845_pinctrl = {
.ngpios = 151,
.wakeirq_map = sdm845_pdc_map,
.nwakeirq_map = ARRAY_SIZE(sdm845_pdc_map),
+ .wakeirq_dual_edge_errata = true,
};
static const struct msm_pinctrl_soc_data sdm845_acpi_pinctrl = {
--
2.33.0
From: Bjorn Andersson <[email protected]>
[ Upstream commit 62209e805b5c68577602a5803a71d8e2e11ee0d3 ]
The downstream TLMM binding covers a group of TLMM-related hardware
blocks, but the upstream binding only captures the particular block
related to controlling the TLMM pins from an OS. In the translation of
the driver from downstream, the offset of 0x100000 was lost for the UFS
and SDC pingroups.
Fixes: d5d348a3271f ("pinctrl: qcom: Add SM8350 pinctrl driver")
Signed-off-by: Bjorn Andersson <[email protected]>
Reviewed-by: Vinod Koul <[email protected]>
Reviewed-by: Vladimir Zapolskiy <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/pinctrl/qcom/pinctrl-sm8350.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/pinctrl/qcom/pinctrl-sm8350.c b/drivers/pinctrl/qcom/pinctrl-sm8350.c
index 4d8f8636c2b39..1c042d39380c6 100644
--- a/drivers/pinctrl/qcom/pinctrl-sm8350.c
+++ b/drivers/pinctrl/qcom/pinctrl-sm8350.c
@@ -1597,10 +1597,10 @@ static const struct msm_pingroup sm8350_groups[] = {
[200] = PINGROUP(200, qdss_gpio, _, _, _, _, _, _, _, _),
[201] = PINGROUP(201, _, _, _, _, _, _, _, _, _),
[202] = PINGROUP(202, _, _, _, _, _, _, _, _, _),
- [203] = UFS_RESET(ufs_reset, 0x1d8000),
- [204] = SDC_PINGROUP(sdc2_clk, 0x1cf000, 14, 6),
- [205] = SDC_PINGROUP(sdc2_cmd, 0x1cf000, 11, 3),
- [206] = SDC_PINGROUP(sdc2_data, 0x1cf000, 9, 0),
+ [203] = UFS_RESET(ufs_reset, 0xd8000),
+ [204] = SDC_PINGROUP(sdc2_clk, 0xcf000, 14, 6),
+ [205] = SDC_PINGROUP(sdc2_cmd, 0xcf000, 11, 3),
+ [206] = SDC_PINGROUP(sdc2_data, 0xcf000, 9, 0),
};
static const struct msm_gpio_wakeirq_map sm8350_pdc_map[] = {
--
2.33.0
From: Alexander Antonov <[email protected]>
[ Upstream commit e324234e0aa881b7841c7c713306403e12b069ff ]
According Uncore Reference Manual: any of the CHA events may be filtered
by Thread/Core-ID by using tid modifier in CHA Filter 0 Register.
Update skx_cha_hw_config() to follow Uncore Guide.
Fixes: cd34cd97b7b4 ("perf/x86/intel/uncore: Add Skylake server uncore support")
Signed-off-by: Alexander Antonov <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Kan Liang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/events/intel/uncore_snbep.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/x86/events/intel/uncore_snbep.c b/arch/x86/events/intel/uncore_snbep.c
index eb2c6cea9d0d5..e5ee6bb62ef50 100644
--- a/arch/x86/events/intel/uncore_snbep.c
+++ b/arch/x86/events/intel/uncore_snbep.c
@@ -3608,6 +3608,9 @@ static int skx_cha_hw_config(struct intel_uncore_box *box, struct perf_event *ev
struct hw_perf_event_extra *reg1 = &event->hw.extra_reg;
struct extra_reg *er;
int idx = 0;
+ /* Any of the CHA events may be filtered by Thread/Core-ID.*/
+ if (event->hw.config & SNBEP_CBO_PMON_CTL_TID_EN)
+ idx = SKX_CHA_MSR_PMON_BOX_FILTER_TID;
for (er = skx_uncore_cha_extra_regs; er->msr; er++) {
if (er->event != (event->hw.config & er->config_mask))
--
2.33.0
From: Neta Ostrovsky <[email protected]>
[ Upstream commit ba50cd9451f6c49cf0841c0a4a146ff6a2822699 ]
In the fast unload flow, the device state is set to internal error,
which indicates that the driver started the destroy process.
In this case, when a destroy command is being executed, it should return
MLX5_CMD_STAT_OK.
Fix MLX5_CMD_OP_DESTROY_UCTX and MLX5_CMD_OP_DESTROY_UMEM to return OK
instead of EIO.
This fixes a call trace in the umem release process -
[ 2633.536695] Call Trace:
[ 2633.537518] ib_uverbs_remove_one+0xc3/0x140 [ib_uverbs]
[ 2633.538596] remove_client_context+0x8b/0xd0 [ib_core]
[ 2633.539641] disable_device+0x8c/0x130 [ib_core]
[ 2633.540615] __ib_unregister_device+0x35/0xa0 [ib_core]
[ 2633.541640] ib_unregister_device+0x21/0x30 [ib_core]
[ 2633.542663] __mlx5_ib_remove+0x38/0x90 [mlx5_ib]
[ 2633.543640] auxiliary_bus_remove+0x1e/0x30 [auxiliary]
[ 2633.544661] device_release_driver_internal+0x103/0x1f0
[ 2633.545679] bus_remove_device+0xf7/0x170
[ 2633.546640] device_del+0x181/0x410
[ 2633.547606] mlx5_rescan_drivers_locked.part.10+0x63/0x160 [mlx5_core]
[ 2633.548777] mlx5_unregister_device+0x27/0x40 [mlx5_core]
[ 2633.549841] mlx5_uninit_one+0x21/0xc0 [mlx5_core]
[ 2633.550864] remove_one+0x69/0xe0 [mlx5_core]
[ 2633.551819] pci_device_remove+0x3b/0xc0
[ 2633.552731] device_release_driver_internal+0x103/0x1f0
[ 2633.553746] unbind_store+0xf6/0x130
[ 2633.554657] kernfs_fop_write+0x116/0x190
[ 2633.555567] vfs_write+0xa5/0x1a0
[ 2633.556407] ksys_write+0x4f/0xb0
[ 2633.557233] do_syscall_64+0x5b/0x1a0
[ 2633.558071] entry_SYSCALL_64_after_hwframe+0x65/0xca
[ 2633.559018] RIP: 0033:0x7f9977132648
[ 2633.559821] Code: 89 02 48 c7 c0 ff ff ff ff eb b3 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 8d 05 55 6f 2d 00 8b 00 85 c0 75 17 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 41 54 49 89 d4 55
[ 2633.562332] RSP: 002b:00007fffb1a83888 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[ 2633.563472] RAX: ffffffffffffffda RBX: 000000000000000c RCX: 00007f9977132648
[ 2633.564541] RDX: 000000000000000c RSI: 000055b90546e230 RDI: 0000000000000001
[ 2633.565596] RBP: 000055b90546e230 R08: 00007f9977406860 R09: 00007f9977a54740
[ 2633.566653] R10: 0000000000000000 R11: 0000000000000246 R12: 00007f99774056e0
[ 2633.567692] R13: 000000000000000c R14: 00007f9977400880 R15: 000000000000000c
[ 2633.568725] ---[ end trace 10b4fe52945e544d ]---
Fixes: 6a6fabbfa3e8 ("net/mlx5: Update pci error handler entries and command translation")
Signed-off-by: Neta Ostrovsky <[email protected]>
Reviewed-by: Leon Romanovsky <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/mellanox/mlx5/core/cmd.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c
index db5dfff585c99..c698e4b5381d7 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/cmd.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/cmd.c
@@ -334,6 +334,8 @@ static int mlx5_internal_err_ret_value(struct mlx5_core_dev *dev, u16 op,
case MLX5_CMD_OP_PAGE_FAULT_RESUME:
case MLX5_CMD_OP_QUERY_ESW_FUNCTIONS:
case MLX5_CMD_OP_DEALLOC_SF:
+ case MLX5_CMD_OP_DESTROY_UCTX:
+ case MLX5_CMD_OP_DESTROY_UMEM:
return MLX5_CMD_STAT_OK;
case MLX5_CMD_OP_QUERY_HCA_CAP:
@@ -459,9 +461,7 @@ static int mlx5_internal_err_ret_value(struct mlx5_core_dev *dev, u16 op,
case MLX5_CMD_OP_MODIFY_GENERAL_OBJECT:
case MLX5_CMD_OP_QUERY_GENERAL_OBJECT:
case MLX5_CMD_OP_CREATE_UCTX:
- case MLX5_CMD_OP_DESTROY_UCTX:
case MLX5_CMD_OP_CREATE_UMEM:
- case MLX5_CMD_OP_DESTROY_UMEM:
case MLX5_CMD_OP_ALLOC_MEMIC:
case MLX5_CMD_OP_MODIFY_XRQ:
case MLX5_CMD_OP_RELEASE_XRQ_ERROR:
--
2.33.0
From: Valentine Fatiev <[email protected]>
[ Upstream commit 76ded29d3fcda4928da8849ffc446ea46871c1c2 ]
Prior to this patch in case mlx5_core_destroy_cq() failed it proceeds
to rest of destroy operations. mlx5_core_destroy_cq() could be called again
by user and cause additional call of mlx5_debug_cq_remove().
cq->dbg was not nullify in previous call and cause the crash.
Fix it by nullify cq->dbg pointer after removal.
Also proceed to destroy operations only if FW return 0
for MLX5_CMD_OP_DESTROY_CQ command.
general protection fault, probably for non-canonical address 0x2000300004058: 0000 [#1] SMP PTI
CPU: 5 PID: 1228 Comm: python Not tainted 5.15.0-rc5_for_upstream_min_debug_2021_10_14_11_06 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:lockref_get+0x1/0x60
Code: 5d e9 53 ff ff ff 48 8d 7f 70 e8 0a 2e 48 00 c7 85 d0 00 00 00 02
00 00 00 c6 45 70 00 fb 5d c3 c3 cc cc cc cc cc cc cc cc 53 <48> 8b 17
48 89 fb 85 d2 75 3d 48 89 d0 bf 64 00 00 00 48 89 c1 48
RSP: 0018:ffff888137dd7a38 EFLAGS: 00010206
RAX: 0000000000000000 RBX: ffff888107d5f458 RCX: 00000000fffffffe
RDX: 000000000002c2b0 RSI: ffffffff8155e2e0 RDI: 0002000300004058
RBP: ffff888137dd7a88 R08: 0002000300004058 R09: ffff8881144a9f88
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8881141d4000
R13: ffff888137dd7c68 R14: ffff888137dd7d58 R15: ffff888137dd7cc0
FS: 00007f4644f2a4c0(0000) GS:ffff8887a2d40000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055b4500f4380 CR3: 0000000114f7a003 CR4: 0000000000170ea0
Call Trace:
simple_recursive_removal+0x33/0x2e0
? debugfs_remove+0x60/0x60
debugfs_remove+0x40/0x60
mlx5_debug_cq_remove+0x32/0x70 [mlx5_core]
mlx5_core_destroy_cq+0x41/0x1d0 [mlx5_core]
devx_obj_cleanup+0x151/0x330 [mlx5_ib]
? __pollwait+0xd0/0xd0
? xas_load+0x5/0x70
? xa_load+0x62/0xa0
destroy_hw_idr_uobject+0x20/0x80 [ib_uverbs]
uverbs_destroy_uobject+0x3b/0x360 [ib_uverbs]
uobj_destroy+0x54/0xa0 [ib_uverbs]
ib_uverbs_cmd_verbs+0xaf2/0x1160 [ib_uverbs]
? uverbs_finalize_object+0xd0/0xd0 [ib_uverbs]
ib_uverbs_ioctl+0xc4/0x1b0 [ib_uverbs]
__x64_sys_ioctl+0x3e4/0x8e0
Fixes: 94b960b9deff ("net/mlx5e: Fix memory leak in mlx5_core_destroy_cq() error path")
Signed-off-by: Valentine Fatiev <[email protected]>
Reviewed-by: Leon Romanovsky <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/mellanox/mlx5/core/cq.c | 5 +++--
drivers/net/ethernet/mellanox/mlx5/core/debugfs.c | 4 +++-
2 files changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/cq.c b/drivers/net/ethernet/mellanox/mlx5/core/cq.c
index 02e77ffe5c3e4..5371ad0a12eb5 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/cq.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/cq.c
@@ -164,13 +164,14 @@ int mlx5_core_destroy_cq(struct mlx5_core_dev *dev, struct mlx5_core_cq *cq)
MLX5_SET(destroy_cq_in, in, cqn, cq->cqn);
MLX5_SET(destroy_cq_in, in, uid, cq->uid);
err = mlx5_cmd_exec_in(dev, destroy_cq, in);
+ if (err)
+ return err;
synchronize_irq(cq->irqn);
-
mlx5_cq_put(cq);
wait_for_completion(&cq->free);
- return err;
+ return 0;
}
EXPORT_SYMBOL(mlx5_core_destroy_cq);
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/debugfs.c b/drivers/net/ethernet/mellanox/mlx5/core/debugfs.c
index 07c8d9811bc81..10d195042ab55 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/debugfs.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/debugfs.c
@@ -507,6 +507,8 @@ void mlx5_debug_cq_remove(struct mlx5_core_dev *dev, struct mlx5_core_cq *cq)
if (!mlx5_debugfs_root)
return;
- if (cq->dbg)
+ if (cq->dbg) {
rem_res_tree(cq->dbg);
+ cq->dbg = NULL;
+ }
}
--
2.33.0
From: Paul Blakey <[email protected]>
[ Upstream commit d7751d6476185ff754b9dad2cba0c0a6e43ecadc ]
E-Switch encap mode is relevant only when in switchdev mode.
The RDMA driver can query the encap configuration via
mlx5_eswitch_get_encap_mode(). Make sure it returns the currently
used mode and not the set one.
This reverts the cited commit which reset the encap mode
on entering switchdev and fixes the original issue properly.
Fixes: 9a64144d683a ("net/mlx5: E-Switch, Fix default encap mode")
Signed-off-by: Paul Blakey <[email protected]>
Reviewed-by: Mark Bloch <[email protected]>
Reviewed-by: Maor Dickman <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/mellanox/mlx5/core/eswitch.c | 9 +++++++--
.../net/ethernet/mellanox/mlx5/core/eswitch_offloads.c | 7 -------
include/linux/mlx5/eswitch.h | 4 ++--
3 files changed, 9 insertions(+), 11 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
index ec136b4992045..5872cc8bf9532 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
@@ -1572,6 +1572,11 @@ int mlx5_eswitch_init(struct mlx5_core_dev *dev)
esw->enabled_vports = 0;
esw->mode = MLX5_ESWITCH_NONE;
esw->offloads.inline_mode = MLX5_INLINE_MODE_NONE;
+ if (MLX5_CAP_ESW_FLOWTABLE_FDB(dev, reformat) &&
+ MLX5_CAP_ESW_FLOWTABLE_FDB(dev, decap))
+ esw->offloads.encap = DEVLINK_ESWITCH_ENCAP_MODE_BASIC;
+ else
+ esw->offloads.encap = DEVLINK_ESWITCH_ENCAP_MODE_NONE;
dev->priv.eswitch = esw;
BLOCKING_INIT_NOTIFIER_HEAD(&esw->n_head);
@@ -1934,7 +1939,7 @@ free_out:
return err;
}
-u8 mlx5_eswitch_mode(struct mlx5_core_dev *dev)
+u8 mlx5_eswitch_mode(const struct mlx5_core_dev *dev)
{
struct mlx5_eswitch *esw = dev->priv.eswitch;
@@ -1948,7 +1953,7 @@ mlx5_eswitch_get_encap_mode(const struct mlx5_core_dev *dev)
struct mlx5_eswitch *esw;
esw = dev->priv.eswitch;
- return mlx5_esw_allowed(esw) ? esw->offloads.encap :
+ return (mlx5_eswitch_mode(dev) == MLX5_ESWITCH_OFFLOADS) ? esw->offloads.encap :
DEVLINK_ESWITCH_ENCAP_MODE_NONE;
}
EXPORT_SYMBOL(mlx5_eswitch_get_encap_mode);
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
index 0d461e38add37..08534d562d5a9 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
@@ -3141,12 +3141,6 @@ int esw_offloads_enable(struct mlx5_eswitch *esw)
u64 mapping_id;
int err;
- if (MLX5_CAP_ESW_FLOWTABLE_FDB(esw->dev, reformat) &&
- MLX5_CAP_ESW_FLOWTABLE_FDB(esw->dev, decap))
- esw->offloads.encap = DEVLINK_ESWITCH_ENCAP_MODE_BASIC;
- else
- esw->offloads.encap = DEVLINK_ESWITCH_ENCAP_MODE_NONE;
-
mutex_init(&esw->offloads.termtbl_mutex);
mlx5_rdma_enable_roce(esw->dev);
@@ -3244,7 +3238,6 @@ void esw_offloads_disable(struct mlx5_eswitch *esw)
esw_offloads_metadata_uninit(esw);
mlx5_rdma_disable_roce(esw->dev);
mutex_destroy(&esw->offloads.termtbl_mutex);
- esw->offloads.encap = DEVLINK_ESWITCH_ENCAP_MODE_NONE;
}
static int esw_mode_from_devlink(u16 mode, u16 *mlx5_mode)
diff --git a/include/linux/mlx5/eswitch.h b/include/linux/mlx5/eswitch.h
index 4ab5c1fc1270d..a09ed4c8361b6 100644
--- a/include/linux/mlx5/eswitch.h
+++ b/include/linux/mlx5/eswitch.h
@@ -136,13 +136,13 @@ u32 mlx5_eswitch_get_vport_metadata_for_set(struct mlx5_eswitch *esw,
ESW_TUN_OPTS_SLOW_TABLE_GOTO_VPORT)
#define ESW_TUN_SLOW_TABLE_GOTO_VPORT_MARK ESW_TUN_OPTS_MASK
-u8 mlx5_eswitch_mode(struct mlx5_core_dev *dev);
+u8 mlx5_eswitch_mode(const struct mlx5_core_dev *dev);
u16 mlx5_eswitch_get_total_vports(const struct mlx5_core_dev *dev);
struct mlx5_core_dev *mlx5_eswitch_get_core_dev(struct mlx5_eswitch *esw);
#else /* CONFIG_MLX5_ESWITCH */
-static inline u8 mlx5_eswitch_mode(struct mlx5_core_dev *dev)
+static inline u8 mlx5_eswitch_mode(const struct mlx5_core_dev *dev)
{
return MLX5_ESWITCH_NONE;
}
--
2.33.0
From: Alexander Antonov <[email protected]>
[ Upstream commit 3866ae319c846a612109c008f43cba80b8c15e86 ]
According to the latest uncore document, COMP_BUF_OCCUPANCY (0xd5) event
can be collected on 2-3 counters. Update uncore IIO event constraints for
Skylake Server.
Fixes: cd34cd97b7b4 ("perf/x86/intel/uncore: Add Skylake server uncore support")
Signed-off-by: Alexander Antonov <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Kan Liang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/events/intel/uncore_snbep.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/x86/events/intel/uncore_snbep.c b/arch/x86/events/intel/uncore_snbep.c
index e5ee6bb62ef50..9aba4ef77b13b 100644
--- a/arch/x86/events/intel/uncore_snbep.c
+++ b/arch/x86/events/intel/uncore_snbep.c
@@ -3678,6 +3678,7 @@ static struct event_constraint skx_uncore_iio_constraints[] = {
UNCORE_EVENT_CONSTRAINT(0xc0, 0xc),
UNCORE_EVENT_CONSTRAINT(0xc5, 0xc),
UNCORE_EVENT_CONSTRAINT(0xd4, 0xc),
+ UNCORE_EVENT_CONSTRAINT(0xd5, 0xc),
EVENT_CONSTRAINT_END
};
--
2.33.0
From: Vlad Buslov <[email protected]>
[ Upstream commit 362980eada85b5ea691e5e0d9257a991aa7ade47 ]
Function mlx5e_take_tmp_flow() skips flows with zero reference count. This
can cause syndrome 0x179e84 when the called from neigh or route update code
and the skipped flow is not removed from the hardware by the time
underlying encap/decap resource is deleted. Add new completion
'del_hw_done' that is completed when flow is unoffloaded. This is safe to
do because flow with reference count zero needs to be detached from
encap/decap entry before its memory is deallocated, which requires taking
the encap_tbl_lock mutex that is held by the event handlers code.
Fixes: 8914add2c9e5 ("net/mlx5e: Handle FIB events to update tunnel endpoint device")
Signed-off-by: Vlad Buslov <[email protected]>
Reviewed-by: Roi Dayan <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/mellanox/mlx5/core/en/tc_priv.h | 1 +
drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_encap.c | 8 +++++++-
drivers/net/ethernet/mellanox/mlx5/core/en_tc.c | 2 ++
3 files changed, 10 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/tc_priv.h b/drivers/net/ethernet/mellanox/mlx5/core/en/tc_priv.h
index d1599b7b944bf..c340bf90354a0 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en/tc_priv.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en/tc_priv.h
@@ -102,6 +102,7 @@ struct mlx5e_tc_flow {
refcount_t refcnt;
struct rcu_head rcu_head;
struct completion init_done;
+ struct completion del_hw_done;
int tunnel_id; /* the mapped tunnel id of this flow */
struct mlx5_flow_attr *attr;
};
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_encap.c b/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_encap.c
index 1c44c6c345f5d..ec0163d75dd25 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_encap.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun_encap.c
@@ -221,8 +221,14 @@ static void mlx5e_take_tmp_flow(struct mlx5e_tc_flow *flow,
struct list_head *flow_list,
int index)
{
- if (IS_ERR(mlx5e_flow_get(flow)))
+ if (IS_ERR(mlx5e_flow_get(flow))) {
+ /* Flow is being deleted concurrently. Wait for it to be
+ * unoffloaded from hardware, otherwise deleting encap will
+ * fail.
+ */
+ wait_for_completion(&flow->del_hw_done);
return;
+ }
wait_for_completion(&flow->init_done);
flow->tmp_entry_index = index;
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
index 129ff7e0d65cc..d2e7b099b83ab 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
@@ -1544,6 +1544,7 @@ static void mlx5e_tc_del_fdb_flow(struct mlx5e_priv *priv,
else
mlx5e_tc_unoffload_fdb_rules(esw, flow, attr);
}
+ complete_all(&flow->del_hw_done);
if (mlx5_flow_has_geneve_opt(flow))
mlx5_geneve_tlv_option_del(priv->mdev->geneve);
@@ -4222,6 +4223,7 @@ mlx5e_alloc_flow(struct mlx5e_priv *priv, int attr_size,
INIT_LIST_HEAD(&flow->l3_to_l2_reformat);
refcount_set(&flow->refcnt, 1);
init_completion(&flow->init_done);
+ init_completion(&flow->del_hw_done);
*__flow = flow;
*__parse_attr = parse_attr;
--
2.33.0
From: Xin Long <[email protected]>
[ Upstream commit f799ada6bf2397c351220088b9b0980125c77280 ]
Without dropping dst, the packets sent from local mirred/redirected
to ingress will may still use the old dst. ip_rcv() will drop it as
the old dst is for output and its .input is dst_discard.
This patch is to fix by also dropping dst for those packets that are
mirred or redirected from egress to ingress in act_mirred.
Note that we don't drop it for the direction change from ingress to
egress, as on which there might be a user case attaching a metadata
dst by act_tunnel_key that would be used later.
Fixes: b57dc7c13ea9 ("net/sched: Introduce action ct")
Signed-off-by: Xin Long <[email protected]>
Acked-by: Cong Wang <[email protected]>
Reviewed-by: Marcelo Ricardo Leitner <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
net/sched/act_mirred.c | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
diff --git a/net/sched/act_mirred.c b/net/sched/act_mirred.c
index d64b0eeccbe4d..efc963ab995a3 100644
--- a/net/sched/act_mirred.c
+++ b/net/sched/act_mirred.c
@@ -19,6 +19,7 @@
#include <linux/if_arp.h>
#include <net/net_namespace.h>
#include <net/netlink.h>
+#include <net/dst.h>
#include <net/pkt_sched.h>
#include <net/pkt_cls.h>
#include <linux/tc_act/tc_mirred.h>
@@ -228,6 +229,7 @@ static int tcf_mirred_act(struct sk_buff *skb, const struct tc_action *a,
bool want_ingress;
bool is_redirect;
bool expects_nh;
+ bool at_ingress;
int m_eaction;
int mac_len;
bool at_nh;
@@ -263,7 +265,8 @@ static int tcf_mirred_act(struct sk_buff *skb, const struct tc_action *a,
* ingress - that covers the TC S/W datapath.
*/
is_redirect = tcf_mirred_is_act_redirect(m_eaction);
- use_reinsert = skb_at_tc_ingress(skb) && is_redirect &&
+ at_ingress = skb_at_tc_ingress(skb);
+ use_reinsert = at_ingress && is_redirect &&
tcf_mirred_can_reinsert(retval);
if (!use_reinsert) {
skb2 = skb_clone(skb, GFP_ATOMIC);
@@ -271,10 +274,12 @@ static int tcf_mirred_act(struct sk_buff *skb, const struct tc_action *a,
goto out;
}
+ want_ingress = tcf_mirred_act_wants_ingress(m_eaction);
+
/* All mirred/redirected skbs should clear previous ct info */
nf_reset_ct(skb2);
-
- want_ingress = tcf_mirred_act_wants_ingress(m_eaction);
+ if (want_ingress && !at_ingress) /* drop dst for egress -> ingress */
+ skb_dst_drop(skb2);
expects_nh = want_ingress || !m_mac_header_xmit;
at_nh = skb->data == skb_network_header(skb);
--
2.33.0
From: Alexander Antonov <[email protected]>
[ Upstream commit bdc0feee05174418dec1fa68de2af19e1750b99f ]
According to the latest uncore document, DATA_REQ_OF_CPU (0x83),
DATA_REQ_BY_CPU (0xc0) and COMP_BUF_OCCUPANCY (0xd5) events have
constraints. Add uncore IIO constraints for Snowridge.
Fixes: 210cc5f9db7a ("perf/x86/intel/uncore: Add uncore support for Snow Ridge server")
Signed-off-by: Alexander Antonov <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Kan Liang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/events/intel/uncore_snbep.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/x86/events/intel/uncore_snbep.c b/arch/x86/events/intel/uncore_snbep.c
index 9aba4ef77b13b..3660f698fb2aa 100644
--- a/arch/x86/events/intel/uncore_snbep.c
+++ b/arch/x86/events/intel/uncore_snbep.c
@@ -4529,6 +4529,13 @@ static void snr_iio_cleanup_mapping(struct intel_uncore_type *type)
pmu_iio_cleanup_mapping(type, &snr_iio_mapping_group);
}
+static struct event_constraint snr_uncore_iio_constraints[] = {
+ UNCORE_EVENT_CONSTRAINT(0x83, 0x3),
+ UNCORE_EVENT_CONSTRAINT(0xc0, 0xc),
+ UNCORE_EVENT_CONSTRAINT(0xd5, 0xc),
+ EVENT_CONSTRAINT_END
+};
+
static struct intel_uncore_type snr_uncore_iio = {
.name = "iio",
.num_counters = 4,
@@ -4540,6 +4547,7 @@ static struct intel_uncore_type snr_uncore_iio = {
.event_mask_ext = SNR_IIO_PMON_RAW_EVENT_MASK_EXT,
.box_ctl = SNR_IIO_MSR_PMON_BOX_CTL,
.msr_offset = SNR_IIO_MSR_OFFSET,
+ .constraints = snr_uncore_iio_constraints,
.ops = &ivbep_uncore_msr_ops,
.format_group = &snr_uncore_iio_format_group,
.attr_update = snr_iio_attr_update,
--
2.33.0
From: Heiko Carstens <[email protected]>
[ Upstream commit 20c76e242e7025bd355619ba67beb243ba1a1e95 ]
kexec_file_add_ipl_report ignores that ipl_report_finish may fail and
can return an error pointer instead of a valid pointer.
Fix this and simplify by returning NULL in case of an error and let
the only caller handle this case.
Fixes: 99feaa717e55 ("s390/kexec_file: Create ipl report and pass to next kernel")
Signed-off-by: Heiko Carstens <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/s390/kernel/ipl.c | 3 ++-
arch/s390/kernel/machine_kexec_file.c | 8 +++++++-
2 files changed, 9 insertions(+), 2 deletions(-)
diff --git a/arch/s390/kernel/ipl.c b/arch/s390/kernel/ipl.c
index e2cc35775b996..5ad1dde23dc59 100644
--- a/arch/s390/kernel/ipl.c
+++ b/arch/s390/kernel/ipl.c
@@ -2156,7 +2156,7 @@ void *ipl_report_finish(struct ipl_report *report)
buf = vzalloc(report->size);
if (!buf)
- return ERR_PTR(-ENOMEM);
+ goto out;
ptr = buf;
memcpy(ptr, report->ipib, report->ipib->hdr.len);
@@ -2195,6 +2195,7 @@ void *ipl_report_finish(struct ipl_report *report)
}
BUG_ON(ptr > buf + report->size);
+out:
return buf;
}
diff --git a/arch/s390/kernel/machine_kexec_file.c b/arch/s390/kernel/machine_kexec_file.c
index f9e4baa64b675..c1090f0b1f6a6 100644
--- a/arch/s390/kernel/machine_kexec_file.c
+++ b/arch/s390/kernel/machine_kexec_file.c
@@ -170,6 +170,7 @@ static int kexec_file_add_ipl_report(struct kimage *image,
struct kexec_buf buf;
unsigned long addr;
void *ptr, *end;
+ int ret;
buf.image = image;
@@ -199,7 +200,10 @@ static int kexec_file_add_ipl_report(struct kimage *image,
ptr += len;
}
+ ret = -ENOMEM;
buf.buffer = ipl_report_finish(data->report);
+ if (!buf.buffer)
+ goto out;
buf.bufsz = data->report->size;
buf.memsz = buf.bufsz;
@@ -209,7 +213,9 @@ static int kexec_file_add_ipl_report(struct kimage *image,
data->kernel_buf + offsetof(struct lowcore, ipl_parmblock_ptr);
*lc_ipl_parmblock_ptr = (__u32)buf.mem;
- return kexec_add_buffer(&buf);
+ ret = kexec_add_buffer(&buf);
+out:
+ return ret;
}
void *kexec_file_add_components(struct kimage *image,
--
2.33.0
From: Yu Kuai <[email protected]>
[ Upstream commit 15c30104965101b8e76b24d27035569d6613a7d6 ]
If blk_queue_enter() failed due to queue is dying, the
blkdev_put_no_open() is needed because blkcg_conf_open_bdev() succeeded.
Fixes: 0c9d338c8443 ("blk-cgroup: synchronize blkg creation against policy deactivation")
Signed-off-by: Yu Kuai <[email protected]>
Acked-by: Tejun Heo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
block/blk-cgroup.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/block/blk-cgroup.c b/block/blk-cgroup.c
index ebff1af402e5b..0eec59e4df65c 100644
--- a/block/blk-cgroup.c
+++ b/block/blk-cgroup.c
@@ -639,7 +639,7 @@ int blkg_conf_prep(struct blkcg *blkcg, const struct blkcg_policy *pol,
*/
ret = blk_queue_enter(q, 0);
if (ret)
- return ret;
+ goto fail;
rcu_read_lock();
spin_lock_irq(&q->queue_lock);
@@ -675,13 +675,13 @@ int blkg_conf_prep(struct blkcg *blkcg, const struct blkcg_policy *pol,
new_blkg = blkg_alloc(pos, q, GFP_KERNEL);
if (unlikely(!new_blkg)) {
ret = -ENOMEM;
- goto fail;
+ goto fail_exit_queue;
}
if (radix_tree_preload(GFP_KERNEL)) {
blkg_free(new_blkg);
ret = -ENOMEM;
- goto fail;
+ goto fail_exit_queue;
}
rcu_read_lock();
@@ -721,9 +721,10 @@ fail_preloaded:
fail_unlock:
spin_unlock_irq(&q->queue_lock);
rcu_read_unlock();
+fail_exit_queue:
+ blk_queue_exit(q);
fail:
blkdev_put_no_open(bdev);
- blk_queue_exit(q);
/*
* If queue was bypassing, we should retry. Do so after a
* short msleep(). It isn't strictly necessary but queue
--
2.33.0
From: Pavel Skripkin <[email protected]>
[ Upstream commit 9b5a333272a48c2f8b30add7a874e46e8b26129c ]
Access to netdev after free_netdev() will cause use-after-free bug.
Move debug log before free_netdev() call to avoid it.
Fixes: 7472dd9f6499 ("staging: fsl-dpaa2/eth: Move print message")
Signed-off-by: Pavel Skripkin <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
index 7065c71ed7b86..f3e443f2d9cf9 100644
--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
@@ -4538,10 +4538,10 @@ static int dpaa2_eth_remove(struct fsl_mc_device *ls_dev)
fsl_mc_portal_free(priv->mc_io);
- free_netdev(net_dev);
-
dev_dbg(net_dev->dev.parent, "Removed interface %s\n", net_dev->name);
+ free_netdev(net_dev);
+
return 0;
}
--
2.33.0
From: Eryk Rybak <[email protected]>
[ Upstream commit 6afbd7b3c53cb7417189f476e99d431daccb85b0 ]
Setting VLAN port increasing RX queue max_pkt_size
by 4 bytes to take VLAN tag into account.
Trigger the VF reset when setting port VLAN for
VF to renegotiate its capabilities and reinitialize.
Fixes: ba4e003d29c1 ("i40e: don't hold spinlock while resetting VF")
Signed-off-by: Sylwester Dziedziuch <[email protected]>
Signed-off-by: Aleksandr Loktionov <[email protected]>
Signed-off-by: Eryk Rybak <[email protected]>
Tested-by: Konrad Jankowski <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../ethernet/intel/i40e/i40e_virtchnl_pf.c | 53 ++++---------------
1 file changed, 9 insertions(+), 44 deletions(-)
diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
index 472f56b360b8c..815661632e7a7 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
@@ -674,14 +674,13 @@ static int i40e_config_vsi_rx_queue(struct i40e_vf *vf, u16 vsi_id,
u16 vsi_queue_id,
struct virtchnl_rxq_info *info)
{
+ u16 pf_queue_id = i40e_vc_get_pf_queue_id(vf, vsi_id, vsi_queue_id);
struct i40e_pf *pf = vf->pf;
+ struct i40e_vsi *vsi = pf->vsi[vf->lan_vsi_idx];
struct i40e_hw *hw = &pf->hw;
struct i40e_hmc_obj_rxq rx_ctx;
- u16 pf_queue_id;
int ret = 0;
- pf_queue_id = i40e_vc_get_pf_queue_id(vf, vsi_id, vsi_queue_id);
-
/* clear the context structure first */
memset(&rx_ctx, 0, sizeof(struct i40e_hmc_obj_rxq));
@@ -719,6 +718,10 @@ static int i40e_config_vsi_rx_queue(struct i40e_vf *vf, u16 vsi_id,
}
rx_ctx.rxmax = info->max_pkt_size;
+ /* if port VLAN is configured increase the max packet size */
+ if (vsi->info.pvid)
+ rx_ctx.rxmax += VLAN_HLEN;
+
/* enable 32bytes desc always */
rx_ctx.dsize = 1;
@@ -4169,34 +4172,6 @@ error_param:
return ret;
}
-/**
- * i40e_vsi_has_vlans - True if VSI has configured VLANs
- * @vsi: pointer to the vsi
- *
- * Check if a VSI has configured any VLANs. False if we have a port VLAN or if
- * we have no configured VLANs. Do not call while holding the
- * mac_filter_hash_lock.
- */
-static bool i40e_vsi_has_vlans(struct i40e_vsi *vsi)
-{
- bool have_vlans;
-
- /* If we have a port VLAN, then the VSI cannot have any VLANs
- * configured, as all MAC/VLAN filters will be assigned to the PVID.
- */
- if (vsi->info.pvid)
- return false;
-
- /* Since we don't have a PVID, we know that if the device is in VLAN
- * mode it must be because of a VLAN filter configured on this VSI.
- */
- spin_lock_bh(&vsi->mac_filter_hash_lock);
- have_vlans = i40e_is_vsi_in_vlan(vsi);
- spin_unlock_bh(&vsi->mac_filter_hash_lock);
-
- return have_vlans;
-}
-
/**
* i40e_ndo_set_vf_port_vlan
* @netdev: network interface device structure
@@ -4253,19 +4228,9 @@ int i40e_ndo_set_vf_port_vlan(struct net_device *netdev, int vf_id,
/* duplicate request, so just return success */
goto error_pvid;
- if (i40e_vsi_has_vlans(vsi)) {
- dev_err(&pf->pdev->dev,
- "VF %d has already configured VLAN filters and the administrator is requesting a port VLAN override.\nPlease unload and reload the VF driver for this change to take effect.\n",
- vf_id);
- /* Administrator Error - knock the VF offline until he does
- * the right thing by reconfiguring his network correctly
- * and then reloading the VF driver.
- */
- i40e_vc_disable_vf(vf);
- /* During reset the VF got a new VSI, so refresh the pointer. */
- vsi = pf->vsi[vf->lan_vsi_idx];
- }
-
+ i40e_vc_disable_vf(vf);
+ /* During reset the VF got a new VSI, so refresh a pointer. */
+ vsi = pf->vsi[vf->lan_vsi_idx];
/* Locked once because multiple functions below iterate list */
spin_lock_bh(&vsi->mac_filter_hash_lock);
--
2.33.0
From: Eryk Rybak <[email protected]>
[ Upstream commit d2a69fefd75683004ffe87166de5635b3267ee07 ]
Currently, the i40e_vsi_setup_queue_map is basing the count of queues in
TCs on a VSI's alloc_queue_pairs member which is not changed throughout
any user's action (for example via ethtool's set_channels callback).
This implies that vsi->tc_config.tc_info[n].qcount value that is given
to the kernel via netdev_set_tc_queue() that notifies about the count of
queues per particular traffic class is constant even if user has changed
the total count of queues.
This in turn caused the kernel warning after setting the queue count to
the lower value than the initial one:
$ ethtool -l ens801f0
Channel parameters for ens801f0:
Pre-set maximums:
RX: 0
TX: 0
Other: 1
Combined: 64
Current hardware settings:
RX: 0
TX: 0
Other: 1
Combined: 64
$ ethtool -L ens801f0 combined 40
[dmesg]
Number of in use tx queues changed invalidating tc mappings. Priority
traffic classification disabled!
Reason was that vsi->alloc_queue_pairs stayed at 64 value which was used
to set the qcount on TC0 (by default only TC0 exists so all of the
existing queues are assigned to TC0). we update the offset/qcount via
netdev_set_tc_queue() back to the old value but then the
netif_set_real_num_tx_queues() is using the vsi->num_queue_pairs as a
value which got set to 40.
Fix it by using vsi->req_queue_pairs as a queue count that will be
distributed across TCs. Do it only for non-zero values, which implies
that user actually requested the new count of queues.
For VSIs other than main, stay with the vsi->alloc_queue_pairs as we
only allow manipulating the queue count on main VSI.
Fixes: bc6d33c8d93f ("i40e: Fix the number of queues available to be mapped for use")
Co-developed-by: Maciej Fijalkowski <[email protected]>
Signed-off-by: Maciej Fijalkowski <[email protected]>
Co-developed-by: Przemyslaw Patynowski <[email protected]>
Signed-off-by: Przemyslaw Patynowski <[email protected]>
Signed-off-by: Eryk Rybak <[email protected]>
Tested-by: Tony Brelinski <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/i40e/i40e_main.c | 35 ++++++++++++++-------
1 file changed, 23 insertions(+), 12 deletions(-)
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 9777fa3535830..dc78ffac10371 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -1790,6 +1790,7 @@ static void i40e_vsi_setup_queue_map(struct i40e_vsi *vsi,
bool is_add)
{
struct i40e_pf *pf = vsi->back;
+ u16 num_tc_qps = 0;
u16 sections = 0;
u8 netdev_tc = 0;
u16 numtc = 1;
@@ -1797,13 +1798,29 @@ static void i40e_vsi_setup_queue_map(struct i40e_vsi *vsi,
u8 offset;
u16 qmap;
int i;
- u16 num_tc_qps = 0;
sections = I40E_AQ_VSI_PROP_QUEUE_MAP_VALID;
offset = 0;
+ if (vsi->type == I40E_VSI_MAIN) {
+ /* This code helps add more queue to the VSI if we have
+ * more cores than RSS can support, the higher cores will
+ * be served by ATR or other filters. Furthermore, the
+ * non-zero req_queue_pairs says that user requested a new
+ * queue count via ethtool's set_channels, so use this
+ * value for queues distribution across traffic classes
+ */
+ if (vsi->req_queue_pairs > 0)
+ vsi->num_queue_pairs = vsi->req_queue_pairs;
+ else if (pf->flags & I40E_FLAG_MSIX_ENABLED)
+ vsi->num_queue_pairs = pf->num_lan_msix;
+ }
+
/* Number of queues per enabled TC */
- num_tc_qps = vsi->alloc_queue_pairs;
+ if (vsi->type == I40E_VSI_MAIN)
+ num_tc_qps = vsi->num_queue_pairs;
+ else
+ num_tc_qps = vsi->alloc_queue_pairs;
if (enabled_tc && (vsi->back->flags & I40E_FLAG_DCB_ENABLED)) {
/* Find numtc from enabled TC bitmap */
for (i = 0, numtc = 0; i < I40E_MAX_TRAFFIC_CLASS; i++) {
@@ -1881,16 +1898,10 @@ static void i40e_vsi_setup_queue_map(struct i40e_vsi *vsi,
}
ctxt->info.tc_mapping[i] = cpu_to_le16(qmap);
}
-
- /* Set actual Tx/Rx queue pairs */
- vsi->num_queue_pairs = offset;
- if ((vsi->type == I40E_VSI_MAIN) && (numtc == 1)) {
- if (vsi->req_queue_pairs > 0)
- vsi->num_queue_pairs = vsi->req_queue_pairs;
- else if (pf->flags & I40E_FLAG_MSIX_ENABLED)
- vsi->num_queue_pairs = pf->num_lan_msix;
- }
-
+ /* Do not change previously set num_queue_pairs for PFs */
+ if ((vsi->type == I40E_VSI_MAIN && numtc != 1) ||
+ vsi->type != I40E_VSI_MAIN)
+ vsi->num_queue_pairs = offset;
/* Scheduler section valid can only be set for ADD VSI */
if (is_add) {
sections |= I40E_AQ_VSI_PROP_SCHED_VALID;
--
2.33.0
From: Michal Maloszewski <[email protected]>
[ Upstream commit 37d9e304acd903a445df8208b8a13d707902dea6 ]
Remove the reason of null pointer dereference in sync VSI filters.
Added new I40E_VSI_RELEASING flag to signalize deleting and releasing
of VSI resources to sync this thread with sync filters subtask.
Without this patch it is possible to start update the VSI filter list
after VSI is removed, that's causing a kernel oops.
Fixes: 41c445ff0f48 ("i40e: main driver core")
Signed-off-by: Grzegorz Szczurek <[email protected]>
Signed-off-by: Michal Maloszewski <[email protected]>
Reviewed-by: Przemyslaw Patynowski <[email protected]>
Reviewed-by: Witold Fijalkowski <[email protected]>
Reviewed-by: Jaroslaw Gawin <[email protected]>
Reviewed-by: Aleksandr Loktionov <[email protected]>
Tested-by: Tony Brelinski <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/i40e/i40e.h | 1 +
drivers/net/ethernet/intel/i40e/i40e_main.c | 5 +++--
2 files changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/intel/i40e/i40e.h b/drivers/net/ethernet/intel/i40e/i40e.h
index 39fb3d57c0574..d7db443abeafa 100644
--- a/drivers/net/ethernet/intel/i40e/i40e.h
+++ b/drivers/net/ethernet/intel/i40e/i40e.h
@@ -161,6 +161,7 @@ enum i40e_vsi_state_t {
__I40E_VSI_OVERFLOW_PROMISC,
__I40E_VSI_REINIT_REQUESTED,
__I40E_VSI_DOWN_REQUESTED,
+ __I40E_VSI_RELEASING,
/* This must be last as it determines the size of the BITMAP */
__I40E_VSI_STATE_SIZE__,
};
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index e04b540cedc85..9777fa3535830 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -2623,7 +2623,8 @@ static void i40e_sync_filters_subtask(struct i40e_pf *pf)
for (v = 0; v < pf->num_alloc_vsi; v++) {
if (pf->vsi[v] &&
- (pf->vsi[v]->flags & I40E_VSI_FLAG_FILTER_CHANGED)) {
+ (pf->vsi[v]->flags & I40E_VSI_FLAG_FILTER_CHANGED) &&
+ !test_bit(__I40E_VSI_RELEASING, pf->vsi[v]->state)) {
int ret = i40e_sync_vsi_filters(pf->vsi[v]);
if (ret) {
@@ -13771,7 +13772,7 @@ int i40e_vsi_release(struct i40e_vsi *vsi)
dev_info(&pf->pdev->dev, "Can't remove PF VSI\n");
return -ENODEV;
}
-
+ set_bit(__I40E_VSI_RELEASING, vsi->state);
uplink_seid = vsi->uplink_seid;
if (vsi->type != I40E_VSI_SRIOV) {
if (vsi->netdev_registered) {
--
2.33.0
From: Eryk Rybak <[email protected]>
[ Upstream commit 9e0a603cb7dce2a19d98116d42de84b6db26d716 ]
Properly reconfigure VF VSIs after VF request ADQ.
Created new function to update queue mapping and queue pairs per TC
with AQ update VSI. This sets proper RSS size on NIC.
VFs num_queue_pairs should not be changed during setup of queue maps.
Previously, VF main VSI in ADQ had configured too many queues and had
wrong RSS size, which lead to packets not being consumed and drops in
connectivity.
Fixes: bc6d33c8d93f ("i40e: Fix the number of queues available to be mapped for use")
Co-developed-by: Przemyslaw Patynowski <[email protected]>
Signed-off-by: Przemyslaw Patynowski <[email protected]>
Signed-off-by: Eryk Rybak <[email protected]>
Tested-by: Tony Brelinski <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/i40e/i40e.h | 1 +
drivers/net/ethernet/intel/i40e/i40e_main.c | 64 ++++++++++++++++++-
.../ethernet/intel/i40e/i40e_virtchnl_pf.c | 17 +++--
3 files changed, 74 insertions(+), 8 deletions(-)
diff --git a/drivers/net/ethernet/intel/i40e/i40e.h b/drivers/net/ethernet/intel/i40e/i40e.h
index d7db443abeafa..b10bc59c5700f 100644
--- a/drivers/net/ethernet/intel/i40e/i40e.h
+++ b/drivers/net/ethernet/intel/i40e/i40e.h
@@ -1248,6 +1248,7 @@ void i40e_ptp_restore_hw_time(struct i40e_pf *pf);
void i40e_ptp_init(struct i40e_pf *pf);
void i40e_ptp_stop(struct i40e_pf *pf);
int i40e_ptp_alloc_pins(struct i40e_pf *pf);
+int i40e_update_adq_vsi_queues(struct i40e_vsi *vsi, int vsi_offset);
int i40e_is_vsi_uplink_mode_veb(struct i40e_vsi *vsi);
i40e_status i40e_get_partition_bw_setting(struct i40e_pf *pf);
i40e_status i40e_set_partition_bw_setting(struct i40e_pf *pf);
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index dc78ffac10371..42e26ee5b6d5f 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -1801,6 +1801,8 @@ static void i40e_vsi_setup_queue_map(struct i40e_vsi *vsi,
sections = I40E_AQ_VSI_PROP_QUEUE_MAP_VALID;
offset = 0;
+ /* zero out queue mapping, it will get updated on the end of the function */
+ memset(ctxt->info.queue_mapping, 0, sizeof(ctxt->info.queue_mapping));
if (vsi->type == I40E_VSI_MAIN) {
/* This code helps add more queue to the VSI if we have
@@ -1817,10 +1819,12 @@ static void i40e_vsi_setup_queue_map(struct i40e_vsi *vsi,
}
/* Number of queues per enabled TC */
- if (vsi->type == I40E_VSI_MAIN)
+ if (vsi->type == I40E_VSI_MAIN ||
+ (vsi->type == I40E_VSI_SRIOV && vsi->num_queue_pairs != 0))
num_tc_qps = vsi->num_queue_pairs;
else
num_tc_qps = vsi->alloc_queue_pairs;
+
if (enabled_tc && (vsi->back->flags & I40E_FLAG_DCB_ENABLED)) {
/* Find numtc from enabled TC bitmap */
for (i = 0, numtc = 0; i < I40E_MAX_TRAFFIC_CLASS; i++) {
@@ -1898,10 +1902,12 @@ static void i40e_vsi_setup_queue_map(struct i40e_vsi *vsi,
}
ctxt->info.tc_mapping[i] = cpu_to_le16(qmap);
}
- /* Do not change previously set num_queue_pairs for PFs */
+ /* Do not change previously set num_queue_pairs for PFs and VFs*/
if ((vsi->type == I40E_VSI_MAIN && numtc != 1) ||
- vsi->type != I40E_VSI_MAIN)
+ (vsi->type == I40E_VSI_SRIOV && vsi->num_queue_pairs == 0) ||
+ (vsi->type != I40E_VSI_MAIN && vsi->type != I40E_VSI_SRIOV))
vsi->num_queue_pairs = offset;
+
/* Scheduler section valid can only be set for ADD VSI */
if (is_add) {
sections |= I40E_AQ_VSI_PROP_SCHED_VALID;
@@ -5438,6 +5444,58 @@ static void i40e_vsi_update_queue_map(struct i40e_vsi *vsi,
sizeof(vsi->info.tc_mapping));
}
+/**
+ * i40e_update_adq_vsi_queues - update queue mapping for ADq VSI
+ * @vsi: the VSI being reconfigured
+ * @vsi_offset: offset from main VF VSI
+ */
+int i40e_update_adq_vsi_queues(struct i40e_vsi *vsi, int vsi_offset)
+{
+ struct i40e_vsi_context ctxt = {};
+ struct i40e_pf *pf;
+ struct i40e_hw *hw;
+ int ret;
+
+ if (!vsi)
+ return I40E_ERR_PARAM;
+ pf = vsi->back;
+ hw = &pf->hw;
+
+ ctxt.seid = vsi->seid;
+ ctxt.pf_num = hw->pf_id;
+ ctxt.vf_num = vsi->vf_id + hw->func_caps.vf_base_id + vsi_offset;
+ ctxt.uplink_seid = vsi->uplink_seid;
+ ctxt.connection_type = I40E_AQ_VSI_CONN_TYPE_NORMAL;
+ ctxt.flags = I40E_AQ_VSI_TYPE_VF;
+ ctxt.info = vsi->info;
+
+ i40e_vsi_setup_queue_map(vsi, &ctxt, vsi->tc_config.enabled_tc,
+ false);
+ if (vsi->reconfig_rss) {
+ vsi->rss_size = min_t(int, pf->alloc_rss_size,
+ vsi->num_queue_pairs);
+ ret = i40e_vsi_config_rss(vsi);
+ if (ret) {
+ dev_info(&pf->pdev->dev, "Failed to reconfig rss for num_queues\n");
+ return ret;
+ }
+ vsi->reconfig_rss = false;
+ }
+
+ ret = i40e_aq_update_vsi_params(hw, &ctxt, NULL);
+ if (ret) {
+ dev_info(&pf->pdev->dev, "Update vsi config failed, err %s aq_err %s\n",
+ i40e_stat_str(hw, ret),
+ i40e_aq_str(hw, hw->aq.asq_last_status));
+ return ret;
+ }
+ /* update the local VSI info with updated queue map */
+ i40e_vsi_update_queue_map(vsi, &ctxt);
+ vsi->info.valid_sections = 0;
+
+ return ret;
+}
+
/**
* i40e_vsi_config_tc - Configure VSI Tx Scheduler for given TC map
* @vsi: VSI to be configured
diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
index 815661632e7a7..2102db11972a7 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
@@ -2220,11 +2220,12 @@ static int i40e_vc_config_queues_msg(struct i40e_vf *vf, u8 *msg)
struct virtchnl_vsi_queue_config_info *qci =
(struct virtchnl_vsi_queue_config_info *)msg;
struct virtchnl_queue_pair_info *qpi;
- struct i40e_pf *pf = vf->pf;
u16 vsi_id, vsi_queue_id = 0;
- u16 num_qps_all = 0;
+ struct i40e_pf *pf = vf->pf;
i40e_status aq_ret = 0;
int i, j = 0, idx = 0;
+ struct i40e_vsi *vsi;
+ u16 num_qps_all = 0;
if (!test_bit(I40E_VF_STATE_ACTIVE, &vf->vf_states)) {
aq_ret = I40E_ERR_PARAM;
@@ -2313,9 +2314,15 @@ static int i40e_vc_config_queues_msg(struct i40e_vf *vf, u8 *msg)
pf->vsi[vf->lan_vsi_idx]->num_queue_pairs =
qci->num_queue_pairs;
} else {
- for (i = 0; i < vf->num_tc; i++)
- pf->vsi[vf->ch[i].vsi_idx]->num_queue_pairs =
- vf->ch[i].num_qps;
+ for (i = 0; i < vf->num_tc; i++) {
+ vsi = pf->vsi[vf->ch[i].vsi_idx];
+ vsi->num_queue_pairs = vf->ch[i].num_qps;
+
+ if (i40e_update_adq_vsi_queues(vsi, i)) {
+ aq_ret = I40E_ERR_CONFIG;
+ goto error_param;
+ }
+ }
}
error_param:
--
2.33.0
From: Adrian Hunter <[email protected]>
[ Upstream commit 886fe2915cce6658b0fc19e64b82879325de61ea ]
__ufshcd_issue_tm_cmd() clears req->end_io_data after timing out, which
races with the completion function ufshcd_tmc_handler() which expects
req->end_io_data to have a value.
Note __ufshcd_issue_tm_cmd() and ufshcd_tmc_handler() are already
synchronized using hba->tmf_rqs and hba->outstanding_tasks under the
host_lock spinlock.
It is also not necessary (nor typical) to clear req->end_io_data because
the block layer does it before allocating out requests e.g. via
blk_get_request().
So fix by not clearing it.
Link: https://lore.kernel.org/r/[email protected]
Fixes: f5ef336fd2e4 ("scsi: ufs: core: Fix task management completion")
Reviewed-by: Bart Van Assche <[email protected]>
Signed-off-by: Adrian Hunter <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/ufs/ufshcd.c | 5 -----
1 file changed, 5 deletions(-)
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 325a15186e950..3d0da8b3fed8a 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -6541,11 +6541,6 @@ static int __ufshcd_issue_tm_cmd(struct ufs_hba *hba,
err = wait_for_completion_io_timeout(&wait,
msecs_to_jiffies(TM_CMD_TIMEOUT));
if (!err) {
- /*
- * Make sure that ufshcd_compl_tm() does not trigger a
- * use-after-free.
- */
- req->end_io_data = NULL;
ufshcd_add_tm_upiu_trace(hba, task_tag, UFS_TM_ERR);
dev_err(hba->dev, "%s: task management cmd 0x%.2x timed-out\n",
__func__, tm_function);
--
2.33.0
From: SeongJae Park <[email protected]>
commit d78f3853f831eee46c6dbe726debf3be9e9c0d05 upstream.
DAMON debugfs is supposed to protect dbgfs_ctxs, dbgfs_nr_ctxs, and
dbgfs_dirs using damon_dbgfs_lock. However, some of the code is
accessing the variables without the protection. This fixes it by
protecting all such accesses.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 75c1c2b53c78 ("mm/damon/dbgfs: support multiple contexts")
Signed-off-by: SeongJae Park <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/damon/dbgfs.c | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
--- a/mm/damon/dbgfs.c
+++ b/mm/damon/dbgfs.c
@@ -538,12 +538,14 @@ static ssize_t dbgfs_monitor_on_write(st
return -EINVAL;
}
+ mutex_lock(&damon_dbgfs_lock);
if (!strncmp(kbuf, "on", count))
err = damon_start(dbgfs_ctxs, dbgfs_nr_ctxs);
else if (!strncmp(kbuf, "off", count))
err = damon_stop(dbgfs_ctxs, dbgfs_nr_ctxs);
else
err = -EINVAL;
+ mutex_unlock(&damon_dbgfs_lock);
if (err)
ret = err;
@@ -596,15 +598,16 @@ static int __init __damon_dbgfs_init(voi
static int __init damon_dbgfs_init(void)
{
- int rc;
+ int rc = -ENOMEM;
+ mutex_lock(&damon_dbgfs_lock);
dbgfs_ctxs = kmalloc(sizeof(*dbgfs_ctxs), GFP_KERNEL);
if (!dbgfs_ctxs)
- return -ENOMEM;
+ goto out;
dbgfs_ctxs[0] = dbgfs_new_ctx();
if (!dbgfs_ctxs[0]) {
kfree(dbgfs_ctxs);
- return -ENOMEM;
+ goto out;
}
dbgfs_nr_ctxs = 1;
@@ -615,6 +618,8 @@ static int __init damon_dbgfs_init(void)
pr_err("%s: dbgfs init failed\n", __func__);
}
+out:
+ mutex_unlock(&damon_dbgfs_lock);
return rc;
}
From: SeongJae Park <[email protected]>
commit db7a347b26fe05d2e8c115bb24dfd908d0252bc3 upstream.
Patch series "DAMON fixes".
This patch (of 2):
DAMON users can trigger below warning in '__alloc_pages()' by invoking
write() to some DAMON debugfs files with arbitrarily high count
argument, because DAMON debugfs interface allocates some buffers based
on the user-specified 'count'.
if (unlikely(order >= MAX_ORDER)) {
WARN_ON_ONCE(!(gfp & __GFP_NOWARN));
return NULL;
}
Because the DAMON debugfs interface code checks failure of the
'kmalloc()', this commit simply suppresses the warnings by adding
'__GFP_NOWARN' flag.
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 4bc05954d007 ("mm/damon: implement a debugfs-based user space interface")
Signed-off-by: SeongJae Park <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/damon/dbgfs.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/mm/damon/dbgfs.c
+++ b/mm/damon/dbgfs.c
@@ -32,7 +32,7 @@ static char *user_input_str(const char _
if (*ppos)
return ERR_PTR(-EINVAL);
- kbuf = kmalloc(count + 1, GFP_KERNEL);
+ kbuf = kmalloc(count + 1, GFP_KERNEL | __GFP_NOWARN);
if (!kbuf)
return ERR_PTR(-ENOMEM);
@@ -247,7 +247,7 @@ static ssize_t dbgfs_kdamond_pid_read(st
char *kbuf;
ssize_t len;
- kbuf = kmalloc(count, GFP_KERNEL);
+ kbuf = kmalloc(count, GFP_KERNEL | __GFP_NOWARN);
if (!kbuf)
return -ENOMEM;
From: Geert Uytterhoeven <[email protected]>
commit 61eb495c83bf6ebde490992bf888ca15b9babc39 upstream.
On 32-bit:
fs/pstore/blk.c: In function ‘__best_effort_init’:
include/linux/kern_levels.h:5:18: warning: format ‘%zu’ expects argument of type ‘size_t’, but argument 3 has type ‘long unsigned int’ [-Wformat=]
5 | #define KERN_SOH "\001" /* ASCII Start Of Header */
| ^~~~~~
include/linux/kern_levels.h:14:19: note: in expansion of macro ‘KERN_SOH’
14 | #define KERN_INFO KERN_SOH "6" /* informational */
| ^~~~~~~~
include/linux/printk.h:373:9: note: in expansion of macro ‘KERN_INFO’
373 | printk(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__)
| ^~~~~~~~~
fs/pstore/blk.c:314:3: note: in expansion of macro ‘pr_info’
314 | pr_info("attached %s (%zu) (no dedicated panic_write!)\n",
| ^~~~~~~
Cc: [email protected]
Fixes: 7bb9557b48fcabaa ("pstore/blk: Use the normal block device I/O path")
Signed-off-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: Jens Axboe <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/pstore/blk.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/pstore/blk.c
+++ b/fs/pstore/blk.c
@@ -311,7 +311,7 @@ static int __init __best_effort_init(voi
if (ret)
kfree(best_effort_dev);
else
- pr_info("attached %s (%zu) (no dedicated panic_write!)\n",
+ pr_info("attached %s (%lu) (no dedicated panic_write!)\n",
blkdev, best_effort_dev->zone.total_size);
return ret;
From: Jonathan Davies <[email protected]>
[ Upstream commit cf9acc90c80ecbee00334aa85d92f4e74014bcff ]
virtio_net_hdr_to_skb does not set the skb's gso_size and gso_type
correctly for UFO packets received via virtio-net that are a little over
the GSO size. This can lead to problems elsewhere in the networking
stack, e.g. ovs_vport_send dropping over-sized packets if gso_size is
not set.
This is due to the comparison
if (skb->len - p_off > gso_size)
not properly accounting for the transport layer header.
p_off includes the size of the transport layer header (thlen), so
skb->len - p_off is the size of the TCP/UDP payload.
gso_size is read from the virtio-net header. For UFO, fragmentation
happens at the IP level so does not need to include the UDP header.
Hence the calculation could be comparing a TCP/UDP payload length with
an IP payload length, causing legitimate virtio-net packets to have
lack gso_type/gso_size information.
Example: a UDP packet with payload size 1473 has IP payload size 1481.
If the guest used UFO, it is not fragmented and the virtio-net header's
flags indicate that it is a GSO frame (VIRTIO_NET_HDR_GSO_UDP), with
gso_size = 1480 for an MTU of 1500. skb->len will be 1515 and p_off
will be 42, so skb->len - p_off = 1473. Hence the comparison fails, and
shinfo->gso_size and gso_type are not set as they should be.
Instead, add the UDP header length before comparing to gso_size when
using UFO. In this way, it is the size of the IP payload that is
compared to gso_size.
Fixes: 6dd912f82680 ("net: check untrusted gso_size at kernel entry")
Signed-off-by: Jonathan Davies <[email protected]>
Reviewed-by: Willem de Bruijn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/linux/virtio_net.h | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/include/linux/virtio_net.h b/include/linux/virtio_net.h
index b465f8f3e554f..04e87f4b9417c 100644
--- a/include/linux/virtio_net.h
+++ b/include/linux/virtio_net.h
@@ -120,10 +120,15 @@ retry:
if (hdr->gso_type != VIRTIO_NET_HDR_GSO_NONE) {
u16 gso_size = __virtio16_to_cpu(little_endian, hdr->gso_size);
+ unsigned int nh_off = p_off;
struct skb_shared_info *shinfo = skb_shinfo(skb);
+ /* UFO may not include transport header in gso_size. */
+ if (gso_type & SKB_GSO_UDP)
+ nh_off -= thlen;
+
/* Too small packets are not really GSO ones. */
- if (skb->len - p_off > gso_size) {
+ if (skb->len - nh_off > gso_size) {
shinfo->gso_size = gso_size;
shinfo->gso_type = gso_type;
--
2.33.0
From: Nicolas Dichtel <[email protected]>
commit a31d27fbed5d518734cb60956303eb15089a7634 upstream.
As stated in the bonding doc, trans_start must be set manually for drivers
using NETIF_F_LLTX:
Drivers that use NETIF_F_LLTX flag must also update
netdev_queue->trans_start. If they do not, then the ARP monitor will
immediately fail any slaves using that driver, and those slaves will stay
down.
Link: https://www.kernel.org/doc/html/v5.15/networking/bonding.html#arp-monitor-operation
Signed-off-by: Nicolas Dichtel <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/tun.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -1010,6 +1010,7 @@ static netdev_tx_t tun_net_xmit(struct s
{
struct tun_struct *tun = netdev_priv(dev);
int txq = skb->queue_mapping;
+ struct netdev_queue *queue;
struct tun_file *tfile;
int len = skb->len;
@@ -1054,6 +1055,10 @@ static netdev_tx_t tun_net_xmit(struct s
if (ptr_ring_produce(&tfile->tx_ring, skb))
goto drop;
+ /* NETIF_F_LLTX requires to do our own update of trans_start */
+ queue = netdev_get_tx_queue(dev, txq);
+ queue->trans_start = jiffies;
+
/* Notify and wake up reader process */
if (tfile->flags & TUN_FASYNC)
kill_fasync(&tfile->fasync, SIGIO, POLL_IN);
From: Borislav Petkov <[email protected]>
commit 8d48bf8206f77aa8687f0e241e901e5197e52423 upstream.
Dan reports that Anjaneya Chagam can no longer use the efi=nosoftreserve
kernel command line parameter to suppress "soft reservation" behavior.
This is due to the fact that the following call-chain happens at boot:
early_reserve_memory
|-> efi_memblock_x86_reserve_range
|-> efi_fake_memmap_early
which does
if (!efi_soft_reserve_enabled())
return;
and that would have set EFI_MEM_NO_SOFT_RESERVE after having parsed
"nosoftreserve".
However, parse_early_param() gets called *after* it, leading to the boot
cmdline not being taken into account.
Therefore, carve out the command line preparation into a separate
function which does the early param parsing too. So that it all goes
together.
And then call that function before early_reserve_memory() so that the
params would have been parsed by then.
Fixes: 8aa83e6395ce ("x86/setup: Call early_reserve_memory() earlier")
Reported-by: Dan Williams <[email protected]>
Reviewed-by: Dan Williams <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Tested-by: Anjaneya Chagam <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kernel/setup.c | 66 ++++++++++++++++++++++++++++--------------------
1 file changed, 39 insertions(+), 27 deletions(-)
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -742,6 +742,28 @@ dump_kernel_offset(struct notifier_block
return 0;
}
+static char *prepare_command_line(void)
+{
+#ifdef CONFIG_CMDLINE_BOOL
+#ifdef CONFIG_CMDLINE_OVERRIDE
+ strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
+#else
+ if (builtin_cmdline[0]) {
+ /* append boot loader cmdline to builtin */
+ strlcat(builtin_cmdline, " ", COMMAND_LINE_SIZE);
+ strlcat(builtin_cmdline, boot_command_line, COMMAND_LINE_SIZE);
+ strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
+ }
+#endif
+#endif
+
+ strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
+
+ parse_early_param();
+
+ return command_line;
+}
+
/*
* Determine if we were loaded by an EFI loader. If so, then we have also been
* passed the efi memmap, systab, etc., so we should use these data structures
@@ -831,6 +853,23 @@ void __init setup_arch(char **cmdline_p)
x86_init.oem.arch_setup();
/*
+ * x86_configure_nx() is called before parse_early_param() (called by
+ * prepare_command_line()) to detect whether hardware doesn't support
+ * NX (so that the early EHCI debug console setup can safely call
+ * set_fixmap()). It may then be called again from within noexec_setup()
+ * during parsing early parameters to honor the respective command line
+ * option.
+ */
+ x86_configure_nx();
+
+ /*
+ * This parses early params and it needs to run before
+ * early_reserve_memory() because latter relies on such settings
+ * supplied as early params.
+ */
+ *cmdline_p = prepare_command_line();
+
+ /*
* Do some memory reservations *before* memory is added to memblock, so
* memblock allocations won't overwrite it.
*
@@ -863,33 +902,6 @@ void __init setup_arch(char **cmdline_p)
bss_resource.start = __pa_symbol(__bss_start);
bss_resource.end = __pa_symbol(__bss_stop)-1;
-#ifdef CONFIG_CMDLINE_BOOL
-#ifdef CONFIG_CMDLINE_OVERRIDE
- strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
-#else
- if (builtin_cmdline[0]) {
- /* append boot loader cmdline to builtin */
- strlcat(builtin_cmdline, " ", COMMAND_LINE_SIZE);
- strlcat(builtin_cmdline, boot_command_line, COMMAND_LINE_SIZE);
- strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
- }
-#endif
-#endif
-
- strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
- *cmdline_p = command_line;
-
- /*
- * x86_configure_nx() is called before parse_early_param() to detect
- * whether hardware doesn't support NX (so that the early EHCI debug
- * console setup can safely call set_fixmap()). It may then be called
- * again from within noexec_setup() during parsing early parameters
- * to honor the respective command line option.
- */
- x86_configure_nx();
-
- parse_early_param();
-
#ifdef CONFIG_MEMORY_HOTPLUG
/*
* Memory used by the kernel cannot be hot-removed because Linux
From: Arnd Bergmann <[email protected]>
commit b3b180e735409ca0c76642014304b59482e0e653 upstream.
The ptdma driver has added debugfs support, but this fails to build
when debugfs is disabled:
drivers/dma/ptdma/ptdma-debugfs.c: In function 'ptdma_debugfs_setup':
drivers/dma/ptdma/ptdma-debugfs.c:93:54: error: 'struct dma_device' has no member named 'dbg_dev_root'
93 | debugfs_create_file("info", 0400, pt->dma_dev.dbg_dev_root, pt,
| ^
drivers/dma/ptdma/ptdma-debugfs.c:96:55: error: 'struct dma_device' has no member named 'dbg_dev_root'
96 | debugfs_create_file("stats", 0400, pt->dma_dev.dbg_dev_root, pt,
| ^
drivers/dma/ptdma/ptdma-debugfs.c:102:52: error: 'struct dma_device' has no member named 'dbg_dev_root'
102 | debugfs_create_dir("q", pt->dma_dev.dbg_dev_root);
| ^
Remove the #ifdef in the header, as this only saves a few bytes,
but would require ugly #ifdefs in each driver using it.
Simplify the other user while we're at it.
Fixes: e2fb2e2a33fa ("dmaengine: ptdma: Add debugfs entries for PTDMA")
Fixes: 26cf132de6f7 ("dmaengine: Create debug directories for DMA devices")
Signed-off-by: Arnd Bergmann <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/dma/xilinx/xilinx_dpdma.c | 15 +--------------
include/linux/dmaengine.h | 2 --
2 files changed, 1 insertion(+), 16 deletions(-)
--- a/drivers/dma/xilinx/xilinx_dpdma.c
+++ b/drivers/dma/xilinx/xilinx_dpdma.c
@@ -271,9 +271,6 @@ struct xilinx_dpdma_device {
/* -----------------------------------------------------------------------------
* DebugFS
*/
-
-#ifdef CONFIG_DEBUG_FS
-
#define XILINX_DPDMA_DEBUGFS_READ_MAX_SIZE 32
#define XILINX_DPDMA_DEBUGFS_UINT16_MAX_STR "65535"
@@ -299,7 +296,7 @@ struct xilinx_dpdma_debugfs_request {
static void xilinx_dpdma_debugfs_desc_done_irq(struct xilinx_dpdma_chan *chan)
{
- if (chan->id == dpdma_debugfs.chan_id)
+ if (IS_ENABLED(CONFIG_DEBUG_FS) && chan->id == dpdma_debugfs.chan_id)
dpdma_debugfs.xilinx_dpdma_irq_done_count++;
}
@@ -462,16 +459,6 @@ static void xilinx_dpdma_debugfs_init(st
dev_err(xdev->dev, "Failed to create debugfs testcase file\n");
}
-#else
-static void xilinx_dpdma_debugfs_init(struct xilinx_dpdma_device *xdev)
-{
-}
-
-static void xilinx_dpdma_debugfs_desc_done_irq(struct xilinx_dpdma_chan *chan)
-{
-}
-#endif /* CONFIG_DEBUG_FS */
-
/* -----------------------------------------------------------------------------
* I/O Accessors
*/
--- a/include/linux/dmaengine.h
+++ b/include/linux/dmaengine.h
@@ -944,10 +944,8 @@ struct dma_device {
void (*device_issue_pending)(struct dma_chan *chan);
void (*device_release)(struct dma_device *dev);
/* debugfs support */
-#ifdef CONFIG_DEBUG_FS
void (*dbg_summary_show)(struct seq_file *s, struct dma_device *dev);
struct dentry *dbg_dev_root;
-#endif
};
static inline int dmaengine_slave_config(struct dma_chan *chan,
From: Reinette Chatre <[email protected]>
commit ac5d272a0ad0419f52e08c91953356e32b075af7 upstream.
The SGX driver maintains a single global free page counter,
sgx_nr_free_pages, that reflects the number of free pages available
across all NUMA nodes. Correspondingly, a list of free pages is
associated with each NUMA node and sgx_nr_free_pages is updated
every time a page is added or removed from any of the free page
lists. The main usage of sgx_nr_free_pages is by the reclaimer
that runs when it (sgx_nr_free_pages) goes below a watermark
to ensure that there are always some free pages available to, for
example, support efficient page faults.
With sgx_nr_free_pages accessed and modified from a few places
it is essential to ensure that these accesses are done safely but
this is not the case. sgx_nr_free_pages is read without any
protection and updated with inconsistent protection by any one
of the spin locks associated with the individual NUMA nodes.
For example:
CPU_A CPU_B
----- -----
spin_lock(&nodeA->lock); spin_lock(&nodeB->lock);
... ...
sgx_nr_free_pages--; /* NOT SAFE */ sgx_nr_free_pages--;
spin_unlock(&nodeA->lock); spin_unlock(&nodeB->lock);
Since sgx_nr_free_pages may be protected by different spin locks
while being modified from different CPUs, the following scenario
is possible:
CPU_A CPU_B
----- -----
{sgx_nr_free_pages = 100}
spin_lock(&nodeA->lock); spin_lock(&nodeB->lock);
sgx_nr_free_pages--; sgx_nr_free_pages--;
/* LOAD sgx_nr_free_pages = 100 */ /* LOAD sgx_nr_free_pages = 100 */
/* sgx_nr_free_pages-- */ /* sgx_nr_free_pages-- */
/* STORE sgx_nr_free_pages = 99 */ /* STORE sgx_nr_free_pages = 99 */
spin_unlock(&nodeA->lock); spin_unlock(&nodeB->lock);
In the above scenario, sgx_nr_free_pages is decremented from two CPUs
but instead of sgx_nr_free_pages ending with a value that is two less
than it started with, it was only decremented by one while the number
of free pages were actually reduced by two. The consequence of
sgx_nr_free_pages not being protected is that its value may not
accurately reflect the actual number of free pages on the system,
impacting the availability of free pages in support of many flows.
The problematic scenario is when the reclaimer does not run because it
believes there to be sufficient free pages while any attempt to allocate
a page fails because there are no free pages available. In the SGX driver
the reclaimer's watermark is only 32 pages so after encountering the
above example scenario 32 times a user space hang is possible when there
are no more free pages because of repeated page faults caused by no
free pages made available.
The following flow was encountered:
asm_exc_page_fault
...
sgx_vma_fault()
sgx_encl_load_page()
sgx_encl_eldu() // Encrypted page needs to be loaded from backing
// storage into newly allocated SGX memory page
sgx_alloc_epc_page() // Allocate a page of SGX memory
__sgx_alloc_epc_page() // Fails, no free SGX memory
...
if (sgx_should_reclaim(SGX_NR_LOW_PAGES)) // Wake reclaimer
wake_up(&ksgxd_waitq);
return -EBUSY; // Return -EBUSY giving reclaimer time to run
return -EBUSY;
return -EBUSY;
return VM_FAULT_NOPAGE;
The reclaimer is triggered in above flow with the following code:
static bool sgx_should_reclaim(unsigned long watermark)
{
return sgx_nr_free_pages < watermark &&
!list_empty(&sgx_active_page_list);
}
In the problematic scenario there were no free pages available yet the
value of sgx_nr_free_pages was above the watermark. The allocation of
SGX memory thus always failed because of a lack of free pages while no
free pages were made available because the reclaimer is never started
because of sgx_nr_free_pages' incorrect value. The consequence was that
user space kept encountering VM_FAULT_NOPAGE that caused the same
address to be accessed repeatedly with the same result.
Change the global free page counter to an atomic type that
ensures simultaneous updates are done safely. While doing so, move
the updating of the variable outside of the spin lock critical
section to which it does not belong.
Cc: [email protected]
Fixes: 901ddbb9ecf5 ("x86/sgx: Add a basic NUMA allocation scheme to sgx_alloc_epc_page()")
Suggested-by: Dave Hansen <[email protected]>
Signed-off-by: Reinette Chatre <[email protected]>
Signed-off-by: Dave Hansen <[email protected]>
Reviewed-by: Tony Luck <[email protected]>
Acked-by: Jarkko Sakkinen <[email protected]>
Link: https://lkml.kernel.org/r/a95a40743bbd3f795b465f30922dde7f1ea9e0eb.1637004094.git.reinette.chatre@intel.com
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kernel/cpu/sgx/main.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
--- a/arch/x86/kernel/cpu/sgx/main.c
+++ b/arch/x86/kernel/cpu/sgx/main.c
@@ -28,8 +28,7 @@ static DECLARE_WAIT_QUEUE_HEAD(ksgxd_wai
static LIST_HEAD(sgx_active_page_list);
static DEFINE_SPINLOCK(sgx_reclaimer_lock);
-/* The free page list lock protected variables prepend the lock. */
-static unsigned long sgx_nr_free_pages;
+static atomic_long_t sgx_nr_free_pages = ATOMIC_LONG_INIT(0);
/* Nodes with one or more EPC sections. */
static nodemask_t sgx_numa_mask;
@@ -403,14 +402,15 @@ skip:
spin_lock(&node->lock);
list_add_tail(&epc_page->list, &node->free_page_list);
- sgx_nr_free_pages++;
spin_unlock(&node->lock);
+ atomic_long_inc(&sgx_nr_free_pages);
}
}
static bool sgx_should_reclaim(unsigned long watermark)
{
- return sgx_nr_free_pages < watermark && !list_empty(&sgx_active_page_list);
+ return atomic_long_read(&sgx_nr_free_pages) < watermark &&
+ !list_empty(&sgx_active_page_list);
}
static int ksgxd(void *p)
@@ -471,9 +471,9 @@ static struct sgx_epc_page *__sgx_alloc_
page = list_first_entry(&node->free_page_list, struct sgx_epc_page, list);
list_del_init(&page->list);
- sgx_nr_free_pages--;
spin_unlock(&node->lock);
+ atomic_long_dec(&sgx_nr_free_pages);
return page;
}
@@ -625,9 +625,9 @@ void sgx_free_epc_page(struct sgx_epc_pa
spin_lock(&node->lock);
list_add_tail(&page->list, &node->free_page_list);
- sgx_nr_free_pages++;
spin_unlock(&node->lock);
+ atomic_long_inc(&sgx_nr_free_pages);
}
static bool __init sgx_setup_epc_section(u64 phys_addr, u64 size,
From: Sean Christopherson <[email protected]>
commit daf972118c517b91f74ff1731417feb4270625a4 upstream.
Check for a valid hv_vp_index array prior to derefencing hv_vp_index when
setting Hyper-V's TSC change callback. If Hyper-V setup failed in
hyperv_init(), the kernel will still report that it's running under
Hyper-V, but will have silently disabled nearly all functionality.
BUG: kernel NULL pointer dereference, address: 0000000000000010
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] SMP
CPU: 4 PID: 1 Comm: swapper/0 Not tainted 5.15.0-rc2+ #75
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:set_hv_tscchange_cb+0x15/0xa0
Code: <8b> 04 82 8b 15 12 17 85 01 48 c1 e0 20 48 0d ee 00 01 00 f6 c6 08
...
Call Trace:
kvm_arch_init+0x17c/0x280
kvm_init+0x31/0x330
vmx_init+0xba/0x13a
do_one_initcall+0x41/0x1c0
kernel_init_freeable+0x1f2/0x23b
kernel_init+0x16/0x120
ret_from_fork+0x22/0x30
Fixes: 93286261de1b ("x86/hyperv: Reenlightenment notifications support")
Cc: [email protected]
Cc: Vitaly Kuznetsov <[email protected]>
Signed-off-by: Sean Christopherson <[email protected]>
Reviewed-by: Vitaly Kuznetsov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Wei Liu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/hyperv/hv_init.c | 3 +++
1 file changed, 3 insertions(+)
--- a/arch/x86/hyperv/hv_init.c
+++ b/arch/x86/hyperv/hv_init.c
@@ -147,6 +147,9 @@ void set_hv_tscchange_cb(void (*cb)(void
return;
}
+ if (!hv_vp_index)
+ return;
+
hv_reenlightenment_cb = cb;
/* Make sure callback is registered before we write to MSRs */
From: Tom Lendacky <[email protected]>
commit b5aead0064f33ae5e693a364e3204fe1c0ac9af2 upstream.
When processing a hypercall for a guest with protected state, currently
SEV-ES guests, the guest CS segment register can't be checked to
determine if the guest is in 64-bit mode. For an SEV-ES guest, it is
expected that communication between the guest and the hypervisor is
performed to shared memory using the GHCB. In order to use the GHCB, the
guest must have been in long mode, otherwise writes by the guest to the
GHCB would be encrypted and not be able to be comprehended by the
hypervisor.
Create a new helper function, is_64_bit_hypercall(), that assumes the
guest is in 64-bit mode when the guest has protected state, and returns
true, otherwise invoking is_64_bit_mode() to determine the mode. Update
the hypercall related routines to use is_64_bit_hypercall() instead of
is_64_bit_mode().
Add a WARN_ON_ONCE() to is_64_bit_mode() to catch occurences of calls to
this helper function for a guest running with protected state.
Fixes: f1c6366e3043 ("KVM: SVM: Add required changes to support intercepts under SEV-ES")
Reported-by: Sean Christopherson <[email protected]>
Signed-off-by: Tom Lendacky <[email protected]>
Message-Id: <e0b20c770c9d0d1403f23d83e785385104211f74.1621878537.git.thomas.lendacky@amd.com>
Cc: [email protected]
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kvm/hyperv.c | 4 ++--
arch/x86/kvm/x86.c | 2 +-
arch/x86/kvm/x86.h | 12 ++++++++++++
arch/x86/kvm/xen.c | 2 +-
4 files changed, 16 insertions(+), 4 deletions(-)
--- a/arch/x86/kvm/hyperv.c
+++ b/arch/x86/kvm/hyperv.c
@@ -2022,7 +2022,7 @@ static void kvm_hv_hypercall_set_result(
{
bool longmode;
- longmode = is_64_bit_mode(vcpu);
+ longmode = is_64_bit_hypercall(vcpu);
if (longmode)
kvm_rax_write(vcpu, result);
else {
@@ -2171,7 +2171,7 @@ int kvm_hv_hypercall(struct kvm_vcpu *vc
}
#ifdef CONFIG_X86_64
- if (is_64_bit_mode(vcpu)) {
+ if (is_64_bit_hypercall(vcpu)) {
hc.param = kvm_rcx_read(vcpu);
hc.ingpa = kvm_rdx_read(vcpu);
hc.outgpa = kvm_r8_read(vcpu);
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -8737,7 +8737,7 @@ int kvm_emulate_hypercall(struct kvm_vcp
trace_kvm_hypercall(nr, a0, a1, a2, a3);
- op_64_bit = is_64_bit_mode(vcpu);
+ op_64_bit = is_64_bit_hypercall(vcpu);
if (!op_64_bit) {
nr &= 0xFFFFFFFF;
a0 &= 0xFFFFFFFF;
--- a/arch/x86/kvm/x86.h
+++ b/arch/x86/kvm/x86.h
@@ -153,12 +153,24 @@ static inline bool is_64_bit_mode(struct
{
int cs_db, cs_l;
+ WARN_ON_ONCE(vcpu->arch.guest_state_protected);
+
if (!is_long_mode(vcpu))
return false;
static_call(kvm_x86_get_cs_db_l_bits)(vcpu, &cs_db, &cs_l);
return cs_l;
}
+static inline bool is_64_bit_hypercall(struct kvm_vcpu *vcpu)
+{
+ /*
+ * If running with protected guest state, the CS register is not
+ * accessible. The hypercall register values will have had to been
+ * provided in 64-bit mode, so assume the guest is in 64-bit.
+ */
+ return vcpu->arch.guest_state_protected || is_64_bit_mode(vcpu);
+}
+
static inline bool x86_exception_has_error_code(unsigned int vector)
{
static u32 exception_has_error_code = BIT(DF_VECTOR) | BIT(TS_VECTOR) |
--- a/arch/x86/kvm/xen.c
+++ b/arch/x86/kvm/xen.c
@@ -698,7 +698,7 @@ int kvm_xen_hypercall(struct kvm_vcpu *v
kvm_hv_hypercall_enabled(vcpu))
return kvm_hv_hypercall(vcpu);
- longmode = is_64_bit_mode(vcpu);
+ longmode = is_64_bit_hypercall(vcpu);
if (!longmode) {
params[0] = (u32)kvm_rbx_read(vcpu);
params[1] = (u32)kvm_rcx_read(vcpu);
From: David Woodhouse <[email protected]>
commit 4e8436479ad3be76a3823e6ce466ae464ce71300 upstream.
In commit 319afe68567b ("KVM: xen: do not use struct gfn_to_hva_cache") we
stopped storing this in-kernel as a GPA, and started storing it as a GFN.
Which means we probably should have stopped calling gpa_to_gfn() on it
when userspace asks for it back.
Cc: [email protected]
Fixes: 319afe68567b ("KVM: xen: do not use struct gfn_to_hva_cache")
Signed-off-by: David Woodhouse <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kvm/xen.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/x86/kvm/xen.c
+++ b/arch/x86/kvm/xen.c
@@ -299,7 +299,7 @@ int kvm_xen_hvm_get_attr(struct kvm *kvm
break;
case KVM_XEN_ATTR_TYPE_SHARED_INFO:
- data->u.shared_info.gfn = gpa_to_gfn(kvm->arch.xen.shinfo_gfn);
+ data->u.shared_info.gfn = kvm->arch.xen.shinfo_gfn;
r = 0;
break;
From: Christophe Leroy <[email protected]>
commit 5499802b2284331788a440585869590f1bd63f7f upstream.
The conversion from __copy_from_user() to __get_user() by
commit d3ccc9781560 ("powerpc/signal: Use __get_user() to copy
sigset_t") introduced a regression in __get_user_sigset() for
powerpc/32. The bug was subsequently moved into
unsafe_get_user_sigset().
The bug is due to the copied 64 bit value being truncated to
32 bits while being assigned to dst->sig[0]
The regression was reported by users of the Xorg packages distributed in
Debian/powerpc --
"The symptoms are that the fb screen goes blank, with the backlight
remaining on and no errors logged in /var/log; wdm (or startx) run
with no effect (I tried logging in in the blind, with no effect).
And they are hard to kill, requiring 'kill -KILL ...'"
Fix the regression by copying each word of the sigset, not only the
first one.
__get_user_sigset() was tentatively optimised to copy 64 bits at once
in order to minimise KUAP unlock/lock impact, but the unsafe variant
doesn't suffer that, so it can just copy words.
Fixes: 887f3ceb51cd ("powerpc/signal32: Convert do_setcontext[_tm]() to user access block")
Cc: [email protected] # v5.13+
Reported-by: Finn Thain <[email protected]>
Reported-and-tested-by: Stan Johnson <[email protected]>
Signed-off-by: Christophe Leroy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/99ef38d61c0eb3f79c68942deb0c35995a93a777.1636966353.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/kernel/signal.h | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
--- a/arch/powerpc/kernel/signal.h
+++ b/arch/powerpc/kernel/signal.h
@@ -25,8 +25,14 @@ static inline int __get_user_sigset(sigs
return __get_user(dst->sig[0], (u64 __user *)&src->sig[0]);
}
-#define unsafe_get_user_sigset(dst, src, label) \
- unsafe_get_user((dst)->sig[0], (u64 __user *)&(src)->sig[0], label)
+#define unsafe_get_user_sigset(dst, src, label) do { \
+ sigset_t *__dst = dst; \
+ const sigset_t __user *__src = src; \
+ int i; \
+ \
+ for (i = 0; i < _NSIG_WORDS; i++) \
+ unsafe_get_user(__dst->sig[i], &__src->sig[i], label); \
+} while (0)
#ifdef CONFIG_VSX
extern unsigned long copy_vsx_to_user(void __user *to,
From: Cédric Le Goater <[email protected]>
commit 8e80a73fa9a7747e3e8255cb149c543aabf65a24 upstream.
Commit 4f86a06e2d6e ("irqdomain: Make normal and nomap irqdomains
exclusive") introduced an IRQ_DOMAIN_FLAG_NO_MAP flag to isolate the
'nomap' domains still in use under the powerpc arch. With this new
flag, the revmap_tree of the IRQ domain is not used anymore. This
change broke the support of shared LSIs [1] in the XIVE driver because
it was relying on a lookup in the revmap_tree to query previously
mapped interrupts. Linux now creates two distinct IRQ mappings on the
same HW IRQ which can lead to unexpected behavior in the drivers.
The XIVE IRQ domain is not a direct mapping domain and its HW IRQ
interrupt number space is rather large : 1M/socket on POWER9 and
POWER10, change the XIVE driver to use a 'tree' domain type instead.
[1] For instance, a linux KVM guest with virtio-rng and virtio-balloon
devices.
Fixes: 4f86a06e2d6e ("irqdomain: Make normal and nomap irqdomains exclusive")
Cc: [email protected] # v5.14+
Signed-off-by: Cédric Le Goater <[email protected]>
Tested-by: Greg Kurz <[email protected]>
Acked-by: Marc Zyngier <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/sysdev/xive/Kconfig | 1 -
arch/powerpc/sysdev/xive/common.c | 3 +--
2 files changed, 1 insertion(+), 3 deletions(-)
--- a/arch/powerpc/sysdev/xive/Kconfig
+++ b/arch/powerpc/sysdev/xive/Kconfig
@@ -3,7 +3,6 @@ config PPC_XIVE
bool
select PPC_SMP_MUXED_IPI
select HARDIRQS_SW_RESEND
- select IRQ_DOMAIN_NOMAP
config PPC_XIVE_NATIVE
bool
--- a/arch/powerpc/sysdev/xive/common.c
+++ b/arch/powerpc/sysdev/xive/common.c
@@ -1443,8 +1443,7 @@ static const struct irq_domain_ops xive_
static void __init xive_init_host(struct device_node *np)
{
- xive_irq_domain = irq_domain_add_nomap(np, XIVE_MAX_IRQ,
- &xive_irq_domain_ops, NULL);
+ xive_irq_domain = irq_domain_add_tree(np, &xive_irq_domain_ops, NULL);
if (WARN_ON(xive_irq_domain == NULL))
return;
irq_set_default_host(xive_irq_domain);
From: Damien Le Moal <[email protected]>
commit 23ef63d5e14f916c5bba39128ebef395859d7c0f upstream.
If ata_read_log_page() fails to read a log page, the ata_dev_err() error
message only print the page number, omitting the log number. In case of
error, facilitate debugging by also printing the log number.
Cc: [email protected] # 5.15
Signed-off-by: Damien Le Moal <[email protected]>
Tested-by: Matthew Perkowski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/ata/libata-core.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -2031,8 +2031,9 @@ retry:
dev->horkage |= ATA_HORKAGE_NO_DMA_LOG;
goto retry;
}
- ata_dev_err(dev, "Read log page 0x%02x failed, Emask 0x%x\n",
- (unsigned int)page, err_mask);
+ ata_dev_err(dev,
+ "Read log 0x%02x page 0x%02x failed, Emask 0x%x\n",
+ (unsigned int)log, (unsigned int)page, err_mask);
}
return err_mask;
From: Sergio Paracuellos <[email protected]>
commit a5b9703fe11cd1d6d7a60102aa2abe686dc1867f upstream.
mt7620.h, included by pinctrl-mt7620.c, mentions MT762X_SOC_MT7628AN
declared in ralink_regs.h.
Fixes: 745ec436de72 ("pinctrl: ralink: move MT7620 SoC pinmux config into a new 'pinctrl-mt7620.c' file")
Cc: [email protected]
Signed-off-by: Luiz Angelo Daros de Luca <[email protected]>
Signed-off-by: Sergio Paracuellos <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pinctrl/ralink/pinctrl-mt7620.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/pinctrl/ralink/pinctrl-mt7620.c
+++ b/drivers/pinctrl/ralink/pinctrl-mt7620.c
@@ -1,5 +1,6 @@
// SPDX-License-Identifier: GPL-2.0-only
+#include <asm/mach-ralink/ralink_regs.h>
#include <asm/mach-ralink/mt7620.h>
#include <linux/module.h>
#include <linux/platform_device.h>
From: Nathan Chancellor <[email protected]>
commit 51f2ec593441d3d1ebc0d478fac3ea329c7c93ac upstream.
When building allmodconfig, there is a warning about TIMER_ENABLE being
redefined:
drivers/clocksource/timer-oxnas-rps.c:39:9: error: 'TIMER_ENABLE' macro redefined [-Werror,-Wmacro-redefined]
#define TIMER_ENABLE BIT(7)
^
arch/hexagon/include/asm/timer-regs.h:13:9: note: previous definition is here
#define TIMER_ENABLE 0
^
1 error generated.
The values in this header are only used in one file each, if they are
used at all. Remove the header and sink all of the constants into their
respective files.
TCX0_CLK_RATE is only used in arch/hexagon/include/asm/timex.h
TIMER_ENABLE, RTOS_TIMER_INT, RTOS_TIMER_REGS_ADDR are only used in
arch/hexagon/kernel/time.c.
SLEEP_CLK_RATE and TIMER_CLR_ON_MATCH have both been unused since the
file's introduction in commit 71e4a47f32f4 ("Hexagon: Add time and timer
functions").
TIMER_ENABLE is redefined as BIT(0) so the shift is moved into the
definition, rather than its use.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Nathan Chancellor <[email protected]>
Acked-by: Brian Cain <[email protected]>
Cc: Nick Desaulniers <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/hexagon/include/asm/timer-regs.h | 26 --------------------------
arch/hexagon/include/asm/timex.h | 3 +--
arch/hexagon/kernel/time.c | 12 ++++++++++--
3 files changed, 11 insertions(+), 30 deletions(-)
delete mode 100644 arch/hexagon/include/asm/timer-regs.h
--- a/arch/hexagon/include/asm/timer-regs.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Timer support for Hexagon
- *
- * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
- */
-
-#ifndef _ASM_TIMER_REGS_H
-#define _ASM_TIMER_REGS_H
-
-/* This stuff should go into a platform specific file */
-#define TCX0_CLK_RATE 19200
-#define TIMER_ENABLE 0
-#define TIMER_CLR_ON_MATCH 1
-
-/*
- * 8x50 HDD Specs 5-8. Simulator co-sim not fixed until
- * release 1.1, and then it's "adjustable" and probably not defaulted.
- */
-#define RTOS_TIMER_INT 3
-#ifdef CONFIG_HEXAGON_COMET
-#define RTOS_TIMER_REGS_ADDR 0xAB000000UL
-#endif
-#define SLEEP_CLK_RATE 32000
-
-#endif
--- a/arch/hexagon/include/asm/timex.h
+++ b/arch/hexagon/include/asm/timex.h
@@ -7,11 +7,10 @@
#define _ASM_TIMEX_H
#include <asm-generic/timex.h>
-#include <asm/timer-regs.h>
#include <asm/hexagon_vm.h>
/* Using TCX0 as our clock. CLOCK_TICK_RATE scheduled to be removed. */
-#define CLOCK_TICK_RATE TCX0_CLK_RATE
+#define CLOCK_TICK_RATE 19200
#define ARCH_HAS_READ_CURRENT_TIMER
--- a/arch/hexagon/kernel/time.c
+++ b/arch/hexagon/kernel/time.c
@@ -17,9 +17,10 @@
#include <linux/of_irq.h>
#include <linux/module.h>
-#include <asm/timer-regs.h>
#include <asm/hexagon_vm.h>
+#define TIMER_ENABLE BIT(0)
+
/*
* For the clocksource we need:
* pcycle frequency (600MHz)
@@ -33,6 +34,13 @@ cycles_t pcycle_freq_mhz;
cycles_t thread_freq_mhz;
cycles_t sleep_clk_freq;
+/*
+ * 8x50 HDD Specs 5-8. Simulator co-sim not fixed until
+ * release 1.1, and then it's "adjustable" and probably not defaulted.
+ */
+#define RTOS_TIMER_INT 3
+#define RTOS_TIMER_REGS_ADDR 0xAB000000UL
+
static struct resource rtos_timer_resources[] = {
{
.start = RTOS_TIMER_REGS_ADDR,
@@ -80,7 +88,7 @@ static int set_next_event(unsigned long
iowrite32(0, &rtos_timer->clear);
iowrite32(delta, &rtos_timer->match);
- iowrite32(1 << TIMER_ENABLE, &rtos_timer->enable);
+ iowrite32(TIMER_ENABLE, &rtos_timer->enable);
return 0;
}
From: Alistair Delva <[email protected]>
commit 94c4b4fd25e6c3763941bdec3ad54f2204afa992 upstream.
Booting to Android userspace on 5.14 or newer triggers the following
SELinux denial:
avc: denied { sys_nice } for comm="init" capability=23
scontext=u:r:init:s0 tcontext=u:r:init:s0 tclass=capability
permissive=0
Init is PID 0 running as root, so it already has CAP_SYS_ADMIN. For
better compatibility with older SEPolicy, check ADMIN before NICE.
Fixes: 9d3a39a5f1e4 ("block: grant IOPRIO_CLASS_RT to CAP_SYS_NICE")
Signed-off-by: Alistair Delva <[email protected]>
Cc: Khazhismel Kumykov <[email protected]>
Cc: Bart Van Assche <[email protected]>
Cc: Serge Hallyn <[email protected]>
Cc: Jens Axboe <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Paul Moore <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected] # v5.14+
Reviewed-by: Bart Van Assche <[email protected]>
Acked-by: Serge Hallyn <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
block/ioprio.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
--- a/block/ioprio.c
+++ b/block/ioprio.c
@@ -69,7 +69,14 @@ int ioprio_check_cap(int ioprio)
switch (class) {
case IOPRIO_CLASS_RT:
- if (!capable(CAP_SYS_NICE) && !capable(CAP_SYS_ADMIN))
+ /*
+ * Originally this only checked for CAP_SYS_ADMIN,
+ * which was implicitly allowed for pid 0 by security
+ * modules such as SELinux. Make sure we check
+ * CAP_SYS_ADMIN first to avoid a denial/avc for
+ * possibly missing CAP_SYS_NICE permission.
+ */
+ if (!capable(CAP_SYS_ADMIN) && !capable(CAP_SYS_NICE))
return -EPERM;
fallthrough;
/* rt has prio field too */
From: Alexander Egorenkov <[email protected]>
commit 3b90954419d4c05651de9cce6d7632bcf6977678 upstream.
This commit fixes a bug introduced by commit e9e7870f90e3 ("s390/dump:
introduce boot data 'oldmem_data'").
OLDMEM_BASE was mistakenly replaced by oldmem_data.size instead of
oldmem_data.start.
This bug caused the following error during kdump:
kdump.sh[878]: No program header covering vaddr 0x3434f5245found kexec bug?
Fixes: e9e7870f90e3 ("s390/dump: introduce boot data 'oldmem_data'")
Cc: [email protected] # 5.15+
Signed-off-by: Alexander Egorenkov <[email protected]>
Reviewed-by: Marc Hartmayer <[email protected]>
Reviewed-by: Heiko Carstens <[email protected]>
Signed-off-by: Heiko Carstens <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/s390/kernel/crash_dump.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/arch/s390/kernel/crash_dump.c
+++ b/arch/s390/kernel/crash_dump.c
@@ -191,8 +191,8 @@ static int copy_oldmem_user(void __user
return rc;
} else {
/* Check for swapped kdump oldmem areas */
- if (oldmem_data.start && from - oldmem_data.size < oldmem_data.size) {
- from -= oldmem_data.size;
+ if (oldmem_data.start && from - oldmem_data.start < oldmem_data.size) {
+ from -= oldmem_data.start;
len = min(count, oldmem_data.size - from);
} else if (oldmem_data.start && from < oldmem_data.size) {
len = min(count, oldmem_data.size - from);
From: Javier Martinez Canillas <[email protected]>
commit fb561bf9abde49f7e00fdbf9ed2ccf2d86cac8ee upstream.
The efifb and simplefb drivers just render to a pre-allocated frame buffer
and rely on the display hardware being initialized before the kernel boots.
But if another driver already probed correctly and registered a fbdev, the
generic drivers shouldn't be probed since an actual driver for the display
hardware is already present.
This is more likely to occur after commit d391c5827107 ("drivers/firmware:
move x86 Generic System Framebuffers support") since the "efi-framebuffer"
and "simple-framebuffer" platform devices are registered at a later time.
Link: https://lore.kernel.org/r/20211110200253.rfudkt3edbd3nsyj@lahvuun/
Fixes: d391c5827107 ("drivers/firmware: move x86 Generic System Framebuffers support")
Reported-by: Ilya Trukhanov <[email protected]>
Cc: <[email protected]> # 5.15.x
Signed-off-by: Javier Martinez Canillas <[email protected]>
Reviewed-by: Daniel Vetter <[email protected]>
Tested-by: Ilya Trukhanov <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/video/fbdev/efifb.c | 11 +++++++++++
drivers/video/fbdev/simplefb.c | 11 +++++++++++
2 files changed, 22 insertions(+)
--- a/drivers/video/fbdev/efifb.c
+++ b/drivers/video/fbdev/efifb.c
@@ -351,6 +351,17 @@ static int efifb_probe(struct platform_d
char *option = NULL;
efi_memory_desc_t md;
+ /*
+ * Generic drivers must not be registered if a framebuffer exists.
+ * If a native driver was probed, the display hardware was already
+ * taken and attempting to use the system framebuffer is dangerous.
+ */
+ if (num_registered_fb > 0) {
+ dev_err(&dev->dev,
+ "efifb: a framebuffer is already registered\n");
+ return -EINVAL;
+ }
+
if (screen_info.orig_video_isVGA != VIDEO_TYPE_EFI || pci_dev_disabled)
return -ENODEV;
--- a/drivers/video/fbdev/simplefb.c
+++ b/drivers/video/fbdev/simplefb.c
@@ -407,6 +407,17 @@ static int simplefb_probe(struct platfor
struct simplefb_par *par;
struct resource *mem;
+ /*
+ * Generic drivers must not be registered if a framebuffer exists.
+ * If a native driver was probed, the display hardware was already
+ * taken and attempting to use the system framebuffer is dangerous.
+ */
+ if (num_registered_fb > 0) {
+ dev_err(&pdev->dev,
+ "simplefb: a framebuffer is already registered\n");
+ return -EINVAL;
+ }
+
if (fb_get_options("simplefb", NULL))
return -ENODEV;
From: Sean Christopherson <[email protected]>
commit 79b11142763791bdead8b6460052cbdde8e08e2f upstream.
Reject COPY_ENC_CONTEXT_FROM if the destination VM has created vCPUs.
KVM relies on SEV activation to occur before vCPUs are created, e.g. to
set VMCB flags and intercepts correctly.
Fixes: 54526d1fd593 ("KVM: x86: Support KVM VMs sharing SEV context")
Cc: [email protected]
Cc: Peter Gonda <[email protected]>
Cc: Marc Orr <[email protected]>
Cc: Sean Christopherson <[email protected]>
Cc: Nathan Tempelman <[email protected]>
Cc: Brijesh Singh <[email protected]>
Cc: Tom Lendacky <[email protected]>
Signed-off-by: Sean Christopherson <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kvm/svm/sev.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
--- a/arch/x86/kvm/svm/sev.c
+++ b/arch/x86/kvm/svm/sev.c
@@ -1787,7 +1787,12 @@ int svm_vm_copy_asid_from(struct kvm *kv
mutex_unlock(&source_kvm->lock);
mutex_lock(&kvm->lock);
- if (sev_guest(kvm)) {
+ /*
+ * Disallow out-of-band SEV/SEV-ES init if the target is already an
+ * SEV guest, or if vCPUs have been created. KVM relies on vCPUs being
+ * created after SEV/SEV-ES initialization, e.g. to init intercepts.
+ */
+ if (sev_guest(kvm) || kvm->created_vcpus) {
ret = -EINVAL;
goto e_mirror_unlock;
}
From: Vasily Gorbik <[email protected]>
commit 420f48f636b98fd685f44a3acc4c0a7c0840910d upstream.
Such reserved memory region, if not cleaned up later causes problems when
memblock_free_all() is called to release free pages to the buddy allocator
and those reserved regions are carried over to reserve_bootmem_region()
which marks the pages as PageReserved.
Instead use memblock_set_current_limit() to make sure memblock allocations
do not go over identity mapping (which could happen when "mem=" option
is used or during kdump).
Cc: [email protected]
Fixes: 73045a08cf55 ("s390: unify identity mapping limits handling")
Reported-by: Gerald Schaefer <[email protected]>
Reviewed-by: Heiko Carstens <[email protected]>
Signed-off-by: Vasily Gorbik <[email protected]>
Signed-off-by: Heiko Carstens <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/s390/kernel/setup.c | 10 +---------
1 file changed, 1 insertion(+), 9 deletions(-)
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -634,14 +634,6 @@ static struct notifier_block kdump_mem_n
#endif
/*
- * Make sure that the area above identity mapping is protected
- */
-static void __init reserve_above_ident_map(void)
-{
- memblock_reserve(ident_map_size, ULONG_MAX);
-}
-
-/*
* Reserve memory for kdump kernel to be loaded with kexec
*/
static void __init reserve_crashkernel(void)
@@ -1005,11 +997,11 @@ void __init setup_arch(char **cmdline_p)
setup_control_program_code();
/* Do some memory reservations *before* memory is added to memblock */
- reserve_above_ident_map();
reserve_kernel();
reserve_initrd();
reserve_certificate_list();
reserve_mem_detect_info();
+ memblock_set_current_limit(ident_map_size);
memblock_allow_resize();
/* Get information about *all* installed memory */
From: Vandita Kulkarni <[email protected]>
commit f15863b27752682bb700c21de5f83f613a0fb77e upstream.
This reverts commit 991d9557b0c4 ("drm/i915/tgl/dsi: Gate the ddi clocks
after pll mapping"). The Bspec was updated recently with the pll ungate
sequence similar to that of icl dsi enable sequence. Hence reverting.
Bspec: 49187
Fixes: 991d9557b0c4 ("drm/i915/tgl/dsi: Gate the ddi clocks after pll mapping")
Cc: <[email protected]> # v5.4+
Signed-off-by: Vandita Kulkarni <[email protected]>
Signed-off-by: Jani Nikula <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 4579509ef181480f4e4510d436c691519167c5c2)
Signed-off-by: Rodrigo Vivi <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/i915/display/icl_dsi.c | 10 ++--------
1 file changed, 2 insertions(+), 8 deletions(-)
--- a/drivers/gpu/drm/i915/display/icl_dsi.c
+++ b/drivers/gpu/drm/i915/display/icl_dsi.c
@@ -711,10 +711,7 @@ static void gen11_dsi_map_pll(struct int
intel_de_write(dev_priv, ICL_DPCLKA_CFGCR0, val);
for_each_dsi_phy(phy, intel_dsi->phys) {
- if (DISPLAY_VER(dev_priv) >= 12)
- val |= ICL_DPCLKA_CFGCR0_DDI_CLK_OFF(phy);
- else
- val &= ~ICL_DPCLKA_CFGCR0_DDI_CLK_OFF(phy);
+ val &= ~ICL_DPCLKA_CFGCR0_DDI_CLK_OFF(phy);
}
intel_de_write(dev_priv, ICL_DPCLKA_CFGCR0, val);
@@ -1150,8 +1147,6 @@ static void
gen11_dsi_enable_port_and_phy(struct intel_encoder *encoder,
const struct intel_crtc_state *crtc_state)
{
- struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
-
/* step 4a: power up all lanes of the DDI used by DSI */
gen11_dsi_power_up_lanes(encoder);
@@ -1177,8 +1172,7 @@ gen11_dsi_enable_port_and_phy(struct int
gen11_dsi_configure_transcoder(encoder, crtc_state);
/* Step 4l: Gate DDI clocks */
- if (DISPLAY_VER(dev_priv) == 11)
- gen11_dsi_gate_clocks(encoder);
+ gen11_dsi_gate_clocks(encoder);
}
static void gen11_dsi_powerup_panel(struct intel_encoder *encoder)
From: Helge Deller <[email protected]>
commit 79df39d535c7a3770856fe9f5aba8c0ad1eebdb6 upstream.
This reverts commit e4f2006f1287e7ea17660490569cff323772dac4.
This patch shows problems with signal handling. Revert it for now.
Signed-off-by: Helge Deller <[email protected]>
Cc: <[email protected]> # v5.15
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/parisc/include/asm/rt_sigframe.h | 2 +-
arch/parisc/kernel/signal.c | 13 +++++++------
arch/parisc/kernel/signal32.h | 2 +-
3 files changed, 9 insertions(+), 8 deletions(-)
--- a/arch/parisc/include/asm/rt_sigframe.h
+++ b/arch/parisc/include/asm/rt_sigframe.h
@@ -2,7 +2,7 @@
#ifndef _ASM_PARISC_RT_SIGFRAME_H
#define _ASM_PARISC_RT_SIGFRAME_H
-#define SIGRETURN_TRAMP 3
+#define SIGRETURN_TRAMP 4
#define SIGRESTARTBLOCK_TRAMP 5
#define TRAMP_SIZE (SIGRETURN_TRAMP + SIGRESTARTBLOCK_TRAMP)
--- a/arch/parisc/kernel/signal.c
+++ b/arch/parisc/kernel/signal.c
@@ -288,21 +288,22 @@ setup_rt_frame(struct ksignal *ksig, sig
already in userspace. The first words of tramp are used to
save the previous sigrestartblock trampoline that might be
on the stack. We start the sigreturn trampoline at
- SIGRESTARTBLOCK_TRAMP. */
+ SIGRESTARTBLOCK_TRAMP+X. */
err |= __put_user(in_syscall ? INSN_LDI_R25_1 : INSN_LDI_R25_0,
&frame->tramp[SIGRESTARTBLOCK_TRAMP+0]);
- err |= __put_user(INSN_BLE_SR2_R0,
+ err |= __put_user(INSN_LDI_R20,
&frame->tramp[SIGRESTARTBLOCK_TRAMP+1]);
- err |= __put_user(INSN_LDI_R20,
+ err |= __put_user(INSN_BLE_SR2_R0,
&frame->tramp[SIGRESTARTBLOCK_TRAMP+2]);
+ err |= __put_user(INSN_NOP, &frame->tramp[SIGRESTARTBLOCK_TRAMP+3]);
- start = (unsigned long) &frame->tramp[SIGRESTARTBLOCK_TRAMP+0];
- end = (unsigned long) &frame->tramp[SIGRESTARTBLOCK_TRAMP+3];
+ start = (unsigned long) &frame->tramp[0];
+ end = (unsigned long) &frame->tramp[TRAMP_SIZE];
flush_user_dcache_range_asm(start, end);
flush_user_icache_range_asm(start, end);
/* TRAMP Words 0-4, Length 5 = SIGRESTARTBLOCK_TRAMP
- * TRAMP Words 5-7, Length 3 = SIGRETURN_TRAMP
+ * TRAMP Words 5-9, Length 4 = SIGRETURN_TRAMP
* So the SIGRETURN_TRAMP is at the end of SIGRESTARTBLOCK_TRAMP
*/
rp = (unsigned long) &frame->tramp[SIGRESTARTBLOCK_TRAMP];
--- a/arch/parisc/kernel/signal32.h
+++ b/arch/parisc/kernel/signal32.h
@@ -36,7 +36,7 @@ struct compat_regfile {
compat_int_t rf_sar;
};
-#define COMPAT_SIGRETURN_TRAMP 3
+#define COMPAT_SIGRETURN_TRAMP 4
#define COMPAT_SIGRESTARTBLOCK_TRAMP 5
#define COMPAT_TRAMP_SIZE (COMPAT_SIGRETURN_TRAMP + \
COMPAT_SIGRESTARTBLOCK_TRAMP)
From: Rustam Kovhaev <[email protected]>
commit 34dbc3aaf5d9e89ba6cc5e24add9458c21ab1950 upstream.
When kmemleak is enabled for SLOB, system does not boot and does not
print anything to the console. At the very early stage in the boot
process we hit infinite recursion from kmemleak_init() and eventually
kernel crashes.
kmemleak_init() specifies SLAB_NOLEAKTRACE for KMEM_CACHE(), but
kmem_cache_create_usercopy() removes it because CACHE_CREATE_MASK is not
valid for SLOB.
Let's fix CACHE_CREATE_MASK and make kmemleak work with SLOB
Link: https://lkml.kernel.org/r/[email protected]
Fixes: d8843922fba4 ("slab: Ignore internal flags in cache creation")
Signed-off-by: Rustam Kovhaev <[email protected]>
Acked-by: Vlastimil Babka <[email protected]>
Reviewed-by: Muchun Song <[email protected]>
Cc: Christoph Lameter <[email protected]>
Cc: Pekka Enberg <[email protected]>
Cc: David Rientjes <[email protected]>
Cc: Joonsoo Kim <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Glauber Costa <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/slab.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/mm/slab.h
+++ b/mm/slab.h
@@ -147,7 +147,7 @@ static inline slab_flags_t kmem_cache_fl
#define SLAB_CACHE_FLAGS (SLAB_NOLEAKTRACE | SLAB_RECLAIM_ACCOUNT | \
SLAB_TEMPORARY | SLAB_ACCOUNT)
#else
-#define SLAB_CACHE_FLAGS (0)
+#define SLAB_CACHE_FLAGS (SLAB_NOLEAKTRACE)
#endif
/* Common flags available with current configuration */
From: Alexander Mikhalitsyn <[email protected]>
commit 85b6d24646e4125c591639841169baa98a2da503 upstream.
Currently, the exit_shm() function not designed to work properly when
task->sysvshm.shm_clist holds shm objects from different IPC namespaces.
This is a real pain when sysctl kernel.shm_rmid_forced = 1, because it
leads to use-after-free (reproducer exists).
This is an attempt to fix the problem by extending exit_shm mechanism to
handle shm's destroy from several IPC ns'es.
To achieve that we do several things:
1. add a namespace (non-refcounted) pointer to the struct shmid_kernel
2. during new shm object creation (newseg()/shmget syscall) we
initialize this pointer by current task IPC ns
3. exit_shm() fully reworked such that it traverses over all shp's in
task->sysvshm.shm_clist and gets IPC namespace not from current task
as it was before but from shp's object itself, then call
shm_destroy(shp, ns).
Note: We need to be really careful here, because as it was said before
(1), our pointer to IPC ns non-refcnt'ed. To be on the safe side we
using special helper get_ipc_ns_not_zero() which allows to get IPC ns
refcounter only if IPC ns not in the "state of destruction".
Q/A
Q: Why can we access shp->ns memory using non-refcounted pointer?
A: Because shp object lifetime is always shorther than IPC namespace
lifetime, so, if we get shp object from the task->sysvshm.shm_clist
while holding task_lock(task) nobody can steal our namespace.
Q: Does this patch change semantics of unshare/setns/clone syscalls?
A: No. It's just fixes non-covered case when process may leave IPC
namespace without getting task->sysvshm.shm_clist list cleaned up.
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Fixes: ab602f79915 ("shm: make exit_shm work proportional to task activity")
Co-developed-by: Manfred Spraul <[email protected]>
Signed-off-by: Manfred Spraul <[email protected]>
Signed-off-by: Alexander Mikhalitsyn <[email protected]>
Cc: "Eric W. Biederman" <[email protected]>
Cc: Davidlohr Bueso <[email protected]>
Cc: Greg KH <[email protected]>
Cc: Andrei Vagin <[email protected]>
Cc: Pavel Tikhomirov <[email protected]>
Cc: Vasily Averin <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/linux/ipc_namespace.h | 15 +++
include/linux/sched/task.h | 2
ipc/shm.c | 189 +++++++++++++++++++++++++++++++-----------
3 files changed, 159 insertions(+), 47 deletions(-)
--- a/include/linux/ipc_namespace.h
+++ b/include/linux/ipc_namespace.h
@@ -131,6 +131,16 @@ static inline struct ipc_namespace *get_
return ns;
}
+static inline struct ipc_namespace *get_ipc_ns_not_zero(struct ipc_namespace *ns)
+{
+ if (ns) {
+ if (refcount_inc_not_zero(&ns->ns.count))
+ return ns;
+ }
+
+ return NULL;
+}
+
extern void put_ipc_ns(struct ipc_namespace *ns);
#else
static inline struct ipc_namespace *copy_ipcs(unsigned long flags,
@@ -146,6 +156,11 @@ static inline struct ipc_namespace *get_
{
return ns;
}
+
+static inline struct ipc_namespace *get_ipc_ns_not_zero(struct ipc_namespace *ns)
+{
+ return ns;
+}
static inline void put_ipc_ns(struct ipc_namespace *ns)
{
--- a/include/linux/sched/task.h
+++ b/include/linux/sched/task.h
@@ -158,7 +158,7 @@ static inline struct vm_struct *task_sta
* Protects ->fs, ->files, ->mm, ->group_info, ->comm, keyring
* subscriptions and synchronises with wait4(). Also used in procfs. Also
* pins the final release of task.io_context. Also protects ->cpuset and
- * ->cgroup.subsys[]. And ->vfork_done.
+ * ->cgroup.subsys[]. And ->vfork_done. And ->sysvshm.shm_clist.
*
* Nests both inside and outside of read_lock(&tasklist_lock).
* It must not be nested with write_lock_irq(&tasklist_lock),
--- a/ipc/shm.c
+++ b/ipc/shm.c
@@ -62,9 +62,18 @@ struct shmid_kernel /* private to the ke
struct pid *shm_lprid;
struct ucounts *mlock_ucounts;
- /* The task created the shm object. NULL if the task is dead. */
+ /*
+ * The task created the shm object, for
+ * task_lock(shp->shm_creator)
+ */
struct task_struct *shm_creator;
- struct list_head shm_clist; /* list by creator */
+
+ /*
+ * List by creator. task_lock(->shm_creator) required for read/write.
+ * If list_empty(), then the creator is dead already.
+ */
+ struct list_head shm_clist;
+ struct ipc_namespace *ns;
} __randomize_layout;
/* shm_mode upper byte flags */
@@ -115,6 +124,7 @@ static void do_shm_rmid(struct ipc_names
struct shmid_kernel *shp;
shp = container_of(ipcp, struct shmid_kernel, shm_perm);
+ WARN_ON(ns != shp->ns);
if (shp->shm_nattch) {
shp->shm_perm.mode |= SHM_DEST;
@@ -225,10 +235,43 @@ static void shm_rcu_free(struct rcu_head
kfree(shp);
}
-static inline void shm_rmid(struct ipc_namespace *ns, struct shmid_kernel *s)
+/*
+ * It has to be called with shp locked.
+ * It must be called before ipc_rmid()
+ */
+static inline void shm_clist_rm(struct shmid_kernel *shp)
+{
+ struct task_struct *creator;
+
+ /* ensure that shm_creator does not disappear */
+ rcu_read_lock();
+
+ /*
+ * A concurrent exit_shm may do a list_del_init() as well.
+ * Just do nothing if exit_shm already did the work
+ */
+ if (!list_empty(&shp->shm_clist)) {
+ /*
+ * shp->shm_creator is guaranteed to be valid *only*
+ * if shp->shm_clist is not empty.
+ */
+ creator = shp->shm_creator;
+
+ task_lock(creator);
+ /*
+ * list_del_init() is a nop if the entry was already removed
+ * from the list.
+ */
+ list_del_init(&shp->shm_clist);
+ task_unlock(creator);
+ }
+ rcu_read_unlock();
+}
+
+static inline void shm_rmid(struct shmid_kernel *s)
{
- list_del(&s->shm_clist);
- ipc_rmid(&shm_ids(ns), &s->shm_perm);
+ shm_clist_rm(s);
+ ipc_rmid(&shm_ids(s->ns), &s->shm_perm);
}
@@ -283,7 +326,7 @@ static void shm_destroy(struct ipc_names
shm_file = shp->shm_file;
shp->shm_file = NULL;
ns->shm_tot -= (shp->shm_segsz + PAGE_SIZE - 1) >> PAGE_SHIFT;
- shm_rmid(ns, shp);
+ shm_rmid(shp);
shm_unlock(shp);
if (!is_file_hugepages(shm_file))
shmem_lock(shm_file, 0, shp->mlock_ucounts);
@@ -306,10 +349,10 @@ static void shm_destroy(struct ipc_names
*
* 2) sysctl kernel.shm_rmid_forced is set to 1.
*/
-static bool shm_may_destroy(struct ipc_namespace *ns, struct shmid_kernel *shp)
+static bool shm_may_destroy(struct shmid_kernel *shp)
{
return (shp->shm_nattch == 0) &&
- (ns->shm_rmid_forced ||
+ (shp->ns->shm_rmid_forced ||
(shp->shm_perm.mode & SHM_DEST));
}
@@ -340,7 +383,7 @@ static void shm_close(struct vm_area_str
ipc_update_pid(&shp->shm_lprid, task_tgid(current));
shp->shm_dtim = ktime_get_real_seconds();
shp->shm_nattch--;
- if (shm_may_destroy(ns, shp))
+ if (shm_may_destroy(shp))
shm_destroy(ns, shp);
else
shm_unlock(shp);
@@ -361,10 +404,10 @@ static int shm_try_destroy_orphaned(int
*
* As shp->* are changed under rwsem, it's safe to skip shp locking.
*/
- if (shp->shm_creator != NULL)
+ if (!list_empty(&shp->shm_clist))
return 0;
- if (shm_may_destroy(ns, shp)) {
+ if (shm_may_destroy(shp)) {
shm_lock_by_ptr(shp);
shm_destroy(ns, shp);
}
@@ -382,48 +425,97 @@ void shm_destroy_orphaned(struct ipc_nam
/* Locking assumes this will only be called with task == current */
void exit_shm(struct task_struct *task)
{
- struct ipc_namespace *ns = task->nsproxy->ipc_ns;
- struct shmid_kernel *shp, *n;
+ for (;;) {
+ struct shmid_kernel *shp;
+ struct ipc_namespace *ns;
- if (list_empty(&task->sysvshm.shm_clist))
- return;
+ task_lock(task);
+
+ if (list_empty(&task->sysvshm.shm_clist)) {
+ task_unlock(task);
+ break;
+ }
+
+ shp = list_first_entry(&task->sysvshm.shm_clist, struct shmid_kernel,
+ shm_clist);
- /*
- * If kernel.shm_rmid_forced is not set then only keep track of
- * which shmids are orphaned, so that a later set of the sysctl
- * can clean them up.
- */
- if (!ns->shm_rmid_forced) {
- down_read(&shm_ids(ns).rwsem);
- list_for_each_entry(shp, &task->sysvshm.shm_clist, shm_clist)
- shp->shm_creator = NULL;
/*
- * Only under read lock but we are only called on current
- * so no entry on the list will be shared.
+ * 1) Get pointer to the ipc namespace. It is worth to say
+ * that this pointer is guaranteed to be valid because
+ * shp lifetime is always shorter than namespace lifetime
+ * in which shp lives.
+ * We taken task_lock it means that shp won't be freed.
*/
- list_del(&task->sysvshm.shm_clist);
- up_read(&shm_ids(ns).rwsem);
- return;
- }
+ ns = shp->ns;
- /*
- * Destroy all already created segments, that were not yet mapped,
- * and mark any mapped as orphan to cover the sysctl toggling.
- * Destroy is skipped if shm_may_destroy() returns false.
- */
- down_write(&shm_ids(ns).rwsem);
- list_for_each_entry_safe(shp, n, &task->sysvshm.shm_clist, shm_clist) {
- shp->shm_creator = NULL;
+ /*
+ * 2) If kernel.shm_rmid_forced is not set then only keep track of
+ * which shmids are orphaned, so that a later set of the sysctl
+ * can clean them up.
+ */
+ if (!ns->shm_rmid_forced)
+ goto unlink_continue;
- if (shm_may_destroy(ns, shp)) {
- shm_lock_by_ptr(shp);
- shm_destroy(ns, shp);
+ /*
+ * 3) get a reference to the namespace.
+ * The refcount could be already 0. If it is 0, then
+ * the shm objects will be free by free_ipc_work().
+ */
+ ns = get_ipc_ns_not_zero(ns);
+ if (!ns) {
+unlink_continue:
+ list_del_init(&shp->shm_clist);
+ task_unlock(task);
+ continue;
}
- }
- /* Remove the list head from any segments still attached. */
- list_del(&task->sysvshm.shm_clist);
- up_write(&shm_ids(ns).rwsem);
+ /*
+ * 4) get a reference to shp.
+ * This cannot fail: shm_clist_rm() is called before
+ * ipc_rmid(), thus the refcount cannot be 0.
+ */
+ WARN_ON(!ipc_rcu_getref(&shp->shm_perm));
+
+ /*
+ * 5) unlink the shm segment from the list of segments
+ * created by current.
+ * This must be done last. After unlinking,
+ * only the refcounts obtained above prevent IPC_RMID
+ * from destroying the segment or the namespace.
+ */
+ list_del_init(&shp->shm_clist);
+
+ task_unlock(task);
+
+ /*
+ * 6) we have all references
+ * Thus lock & if needed destroy shp.
+ */
+ down_write(&shm_ids(ns).rwsem);
+ shm_lock_by_ptr(shp);
+ /*
+ * rcu_read_lock was implicitly taken in shm_lock_by_ptr, it's
+ * safe to call ipc_rcu_putref here
+ */
+ ipc_rcu_putref(&shp->shm_perm, shm_rcu_free);
+
+ if (ipc_valid_object(&shp->shm_perm)) {
+ if (shm_may_destroy(shp))
+ shm_destroy(ns, shp);
+ else
+ shm_unlock(shp);
+ } else {
+ /*
+ * Someone else deleted the shp from namespace
+ * idr/kht while we have waited.
+ * Just unlock and continue.
+ */
+ shm_unlock(shp);
+ }
+
+ up_write(&shm_ids(ns).rwsem);
+ put_ipc_ns(ns); /* paired with get_ipc_ns_not_zero */
+ }
}
static vm_fault_t shm_fault(struct vm_fault *vmf)
@@ -680,7 +772,11 @@ static int newseg(struct ipc_namespace *
if (error < 0)
goto no_id;
+ shp->ns = ns;
+
+ task_lock(current);
list_add(&shp->shm_clist, ¤t->sysvshm.shm_clist);
+ task_unlock(current);
/*
* shmid gets reported as "inode#" in /proc/pid/maps.
@@ -1573,7 +1669,8 @@ out_nattch:
down_write(&shm_ids(ns).rwsem);
shp = shm_lock(ns, shmid);
shp->shm_nattch--;
- if (shm_may_destroy(ns, shp))
+
+ if (shm_may_destroy(shp))
shm_destroy(ns, shp);
else
shm_unlock(shp);
From: Nguyen Dinh Phi <[email protected]>
commit 563fbefed46ae4c1f70cffb8eb54c02df480b2c2 upstream.
If the userspace tools switch from NL80211_IFTYPE_P2P_GO to
NL80211_IFTYPE_ADHOC via send_msg(NL80211_CMD_SET_INTERFACE), it
does not call the cleanup cfg80211_stop_ap(), this leads to the
initialization of in-use data. For example, this path re-init the
sdata->assigned_chanctx_list while it is still an element of
assigned_vifs list, and makes that linked list corrupt.
Signed-off-by: Nguyen Dinh Phi <[email protected]>
Reported-by: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Cc: [email protected]
Fixes: ac800140c20e ("cfg80211: .stop_ap when interface is going down")
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/wireless/util.c | 1 +
1 file changed, 1 insertion(+)
--- a/net/wireless/util.c
+++ b/net/wireless/util.c
@@ -1044,6 +1044,7 @@ int cfg80211_change_iface(struct cfg8021
switch (otype) {
case NL80211_IFTYPE_AP:
+ case NL80211_IFTYPE_P2P_GO:
cfg80211_stop_ap(rdev, dev, true);
break;
case NL80211_IFTYPE_ADHOC:
From: Alvin Lee <[email protected]>
commit 58065a1e524de30df9a2d8214661d5d7eed0a2d9 upstream.
[Why]
Swizzle mode enum for DC_SW_VAR_R_X was existing,
but not mapped correctly.
[How]
Update mapping and conversion for DC_SW_VAR_R_X.
Reviewed-by: XiangBing Foo <[email protected]>
Reviewed-by: Martin Leung <[email protected]>
Acked-by: Qingqing Zhuo <[email protected]>
Signed-off-by: Alvin Lee <[email protected]>
Cc: [email protected]
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c | 4 +++-
drivers/gpu/drm/amd/display/dc/dml/display_mode_enums.h | 4 ++--
2 files changed, 5 insertions(+), 3 deletions(-)
--- a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_resource.c
@@ -1854,7 +1854,9 @@ static void swizzle_to_dml_params(
case DC_SW_VAR_D_X:
*sw_mode = dm_sw_var_d_x;
break;
-
+ case DC_SW_VAR_R_X:
+ *sw_mode = dm_sw_var_r_x;
+ break;
default:
ASSERT(0); /* Not supported */
break;
--- a/drivers/gpu/drm/amd/display/dc/dml/display_mode_enums.h
+++ b/drivers/gpu/drm/amd/display/dc/dml/display_mode_enums.h
@@ -80,11 +80,11 @@ enum dm_swizzle_mode {
dm_sw_SPARE_13 = 24,
dm_sw_64kb_s_x = 25,
dm_sw_64kb_d_x = 26,
- dm_sw_SPARE_14 = 27,
+ dm_sw_64kb_r_x = 27,
dm_sw_SPARE_15 = 28,
dm_sw_var_s_x = 29,
dm_sw_var_d_x = 30,
- dm_sw_64kb_r_x,
+ dm_sw_var_r_x = 31,
dm_sw_gfx7_2d_thin_l_vp,
dm_sw_gfx7_2d_thin_gl,
};
From: Matthew Brost <[email protected]>
commit 669b949c1a44d0cb2bcd18ff6ab4fd0c21e7cf6f upstream.
A small race that could result in incorrect accounting of the number
of outstanding G2H. Basically prior to this patch we did not increment
the number of outstanding G2H if we encoutered a GT reset while sending
a H2G. This was incorrect as the context state had already been updated
to anticipate a G2H response thus the counter should be incremented.
As part of this change we remove a legacy (now unused) path that was the
last caller requiring a G2H response that was not guaranteed to loop.
This allows us to simplify the accounting as we don't need to handle the
case where the send fails due to the channel being busy.
Also always use helper when decrementing this value.
v2 (Daniele): update GEM_BUG_ON check, pull in dead code removal from
later patch, remove loop param from context_deregister.
Fixes: f4eb1f3fe946 ("drm/i915/guc: Ensure G2H response has space in buffer")
Signed-off-by: Matthew Brost <[email protected]>
Signed-off-by: Daniele Ceraolo Spurio <[email protected]>
Cc: <[email protected]>
Reviewed-by: John Harrison <[email protected]>
Signed-off-by: John Harrison <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c | 79 ++++++++++------------
1 file changed, 37 insertions(+), 42 deletions(-)
--- a/drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c
+++ b/drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c
@@ -352,20 +352,29 @@ static inline void set_lrc_desc_register
xa_unlock_irqrestore(&guc->context_lookup, flags);
}
+static void decr_outstanding_submission_g2h(struct intel_guc *guc)
+{
+ if (atomic_dec_and_test(&guc->outstanding_submission_g2h))
+ wake_up_all(&guc->ct.wq);
+}
+
static int guc_submission_send_busy_loop(struct intel_guc *guc,
const u32 *action,
u32 len,
u32 g2h_len_dw,
bool loop)
{
- int err;
-
- err = intel_guc_send_busy_loop(guc, action, len, g2h_len_dw, loop);
+ /*
+ * We always loop when a send requires a reply (i.e. g2h_len_dw > 0),
+ * so we don't handle the case where we don't get a reply because we
+ * aborted the send due to the channel being busy.
+ */
+ GEM_BUG_ON(g2h_len_dw && !loop);
- if (!err && g2h_len_dw)
+ if (g2h_len_dw)
atomic_inc(&guc->outstanding_submission_g2h);
- return err;
+ return intel_guc_send_busy_loop(guc, action, len, g2h_len_dw, loop);
}
int intel_guc_wait_for_pending_msg(struct intel_guc *guc,
@@ -616,7 +625,7 @@ static void scrub_guc_desc_for_outstandi
init_sched_state(ce);
if (pending_enable || destroyed || deregister) {
- atomic_dec(&guc->outstanding_submission_g2h);
+ decr_outstanding_submission_g2h(guc);
if (deregister)
guc_signal_context_fence(ce);
if (destroyed) {
@@ -635,7 +644,7 @@ static void scrub_guc_desc_for_outstandi
intel_engine_signal_breadcrumbs(ce->engine);
}
intel_context_sched_disable_unpin(ce);
- atomic_dec(&guc->outstanding_submission_g2h);
+ decr_outstanding_submission_g2h(guc);
spin_lock_irqsave(&ce->guc_state.lock, flags);
guc_blocked_fence_complete(ce);
spin_unlock_irqrestore(&ce->guc_state.lock, flags);
@@ -1233,8 +1242,7 @@ static int register_context(struct intel
}
static int __guc_action_deregister_context(struct intel_guc *guc,
- u32 guc_id,
- bool loop)
+ u32 guc_id)
{
u32 action[] = {
INTEL_GUC_ACTION_DEREGISTER_CONTEXT,
@@ -1243,16 +1251,16 @@ static int __guc_action_deregister_conte
return guc_submission_send_busy_loop(guc, action, ARRAY_SIZE(action),
G2H_LEN_DW_DEREGISTER_CONTEXT,
- loop);
+ true);
}
-static int deregister_context(struct intel_context *ce, u32 guc_id, bool loop)
+static int deregister_context(struct intel_context *ce, u32 guc_id)
{
struct intel_guc *guc = ce_to_guc(ce);
trace_intel_context_deregister(ce);
- return __guc_action_deregister_context(guc, guc_id, loop);
+ return __guc_action_deregister_context(guc, guc_id);
}
static intel_engine_mask_t adjust_engine_mask(u8 class, intel_engine_mask_t mask)
@@ -1340,26 +1348,23 @@ static int guc_lrc_desc_pin(struct intel
* registering this context.
*/
if (context_registered) {
+ bool disabled;
+ unsigned long flags;
+
trace_intel_context_steal_guc_id(ce);
- if (!loop) {
+ GEM_BUG_ON(!loop);
+
+ /* Seal race with Reset */
+ spin_lock_irqsave(&ce->guc_state.lock, flags);
+ disabled = submission_disabled(guc);
+ if (likely(!disabled)) {
set_context_wait_for_deregister_to_register(ce);
intel_context_get(ce);
- } else {
- bool disabled;
- unsigned long flags;
-
- /* Seal race with Reset */
- spin_lock_irqsave(&ce->guc_state.lock, flags);
- disabled = submission_disabled(guc);
- if (likely(!disabled)) {
- set_context_wait_for_deregister_to_register(ce);
- intel_context_get(ce);
- }
- spin_unlock_irqrestore(&ce->guc_state.lock, flags);
- if (unlikely(disabled)) {
- reset_lrc_desc(guc, desc_idx);
- return 0; /* Will get registered later */
- }
+ }
+ spin_unlock_irqrestore(&ce->guc_state.lock, flags);
+ if (unlikely(disabled)) {
+ reset_lrc_desc(guc, desc_idx);
+ return 0; /* Will get registered later */
}
/*
@@ -1367,13 +1372,9 @@ static int guc_lrc_desc_pin(struct intel
* context whose guc_id was stolen.
*/
with_intel_runtime_pm(runtime_pm, wakeref)
- ret = deregister_context(ce, ce->guc_id, loop);
- if (unlikely(ret == -EBUSY)) {
- clr_context_wait_for_deregister_to_register(ce);
- intel_context_put(ce);
- } else if (unlikely(ret == -ENODEV)) {
+ ret = deregister_context(ce, ce->guc_id);
+ if (unlikely(ret == -ENODEV))
ret = 0; /* Will get registered later */
- }
} else {
with_intel_runtime_pm(runtime_pm, wakeref)
ret = register_context(ce, loop);
@@ -1730,7 +1731,7 @@ static inline void guc_lrc_desc_unpin(st
GEM_BUG_ON(context_enabled(ce));
clr_context_registered(ce);
- deregister_context(ce, ce->guc_id, true);
+ deregister_context(ce, ce->guc_id);
}
static void __guc_context_destroy(struct intel_context *ce)
@@ -2583,12 +2584,6 @@ g2h_context_lookup(struct intel_guc *guc
return ce;
}
-static void decr_outstanding_submission_g2h(struct intel_guc *guc)
-{
- if (atomic_dec_and_test(&guc->outstanding_submission_g2h))
- wake_up_all(&guc->ct.wq);
-}
-
int intel_guc_deregister_done_process_msg(struct intel_guc *guc,
const u32 *msg,
u32 len)
From: Matthew Brost <[email protected]>
commit 9888beaaf118b6878347e1fe2b369fc66d756d18 upstream.
When unblocking a context, do not enable scheduling if the context is
banned, guc_id invalid, or not registered.
v2:
(Daniele)
- Add helper for unblock
Fixes: 62eaf0ae217d ("drm/i915/guc: Support request cancellation")
Signed-off-by: Matthew Brost <[email protected]>
Reviewed-by: Daniele Ceraolo Spurio <[email protected]>
Cc: <[email protected]>
Signed-off-by: John Harrison <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c | 22 +++++++++++++++++++---
1 file changed, 19 insertions(+), 3 deletions(-)
--- a/drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c
+++ b/drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c
@@ -148,6 +148,7 @@ static inline void clr_context_registere
#define SCHED_STATE_BLOCKED_SHIFT 4
#define SCHED_STATE_BLOCKED BIT(SCHED_STATE_BLOCKED_SHIFT)
#define SCHED_STATE_BLOCKED_MASK (0xfff << SCHED_STATE_BLOCKED_SHIFT)
+
static inline void init_sched_state(struct intel_context *ce)
{
/* Only should be called from guc_lrc_desc_pin() */
@@ -1549,6 +1550,23 @@ static struct i915_sw_fence *guc_context
return &ce->guc_blocked;
}
+#define SCHED_STATE_MULTI_BLOCKED_MASK \
+ (SCHED_STATE_BLOCKED_MASK & ~SCHED_STATE_BLOCKED)
+#define SCHED_STATE_NO_UNBLOCK \
+ (SCHED_STATE_MULTI_BLOCKED_MASK | \
+ SCHED_STATE_PENDING_DISABLE | \
+ SCHED_STATE_BANNED)
+
+static bool context_cant_unblock(struct intel_context *ce)
+{
+ lockdep_assert_held(&ce->guc_state.lock);
+
+ return (ce->guc_state.sched_state & SCHED_STATE_NO_UNBLOCK) ||
+ context_guc_id_invalid(ce) ||
+ !lrc_desc_registered(ce_to_guc(ce), ce->guc_id) ||
+ !intel_context_is_pinned(ce);
+}
+
static void guc_context_unblock(struct intel_context *ce)
{
struct intel_guc *guc = ce_to_guc(ce);
@@ -1563,9 +1581,7 @@ static void guc_context_unblock(struct i
spin_lock_irqsave(&ce->guc_state.lock, flags);
if (unlikely(submission_disabled(guc) ||
- !intel_context_is_pinned(ce) ||
- context_pending_disable(ce) ||
- context_blocked(ce) > 1)) {
+ context_cant_unblock(ce))) {
enable = false;
} else {
enable = true;
From: Matthew Brost <[email protected]>
commit 1ca36cff0166b0483fe3b99e711e9c800ebbfaa4 upstream.
If the context is reset as a result of the request cancellation the
context reset G2H is received after schedule disable done G2H which is
the wrong order. The schedule disable done G2H release the waiting
request cancellation code which resubmits the context. This races
with the context reset G2H which also wants to resubmit the context but
in this case it really should be a NOP as request cancellation code owns
the resubmit. Use some clever tricks of checking the context state to
seal this race until the GuC firmware is fixed.
v2:
(Checkpatch)
- Fix typos
v3:
(Daniele)
- State that is a bug in the GuC firmware
Fixes: 62eaf0ae217d ("drm/i915/guc: Support request cancellation")
Signed-off-by: Matthew Brost <[email protected]>
Cc: <[email protected]>
Reviewed-by: Daniele Ceraolo Spurio <[email protected]>
Signed-off-by: John Harrison <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c | 41 ++++++++++++++++++----
1 file changed, 35 insertions(+), 6 deletions(-)
--- a/drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c
+++ b/drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c
@@ -838,17 +838,33 @@ __unwind_incomplete_requests(struct inte
static void __guc_reset_context(struct intel_context *ce, bool stalled)
{
struct i915_request *rq;
+ unsigned long flags;
u32 head;
+ bool skip = false;
intel_context_get(ce);
/*
- * GuC will implicitly mark the context as non-schedulable
- * when it sends the reset notification. Make sure our state
- * reflects this change. The context will be marked enabled
- * on resubmission.
+ * GuC will implicitly mark the context as non-schedulable when it sends
+ * the reset notification. Make sure our state reflects this change. The
+ * context will be marked enabled on resubmission.
+ *
+ * XXX: If the context is reset as a result of the request cancellation
+ * this G2H is received after the schedule disable complete G2H which is
+ * wrong as this creates a race between the request cancellation code
+ * re-submitting the context and this G2H handler. This is a bug in the
+ * GuC but can be worked around in the meantime but converting this to a
+ * NOP if a pending enable is in flight as this indicates that a request
+ * cancellation has occurred.
*/
- clr_context_enabled(ce);
+ spin_lock_irqsave(&ce->guc_state.lock, flags);
+ if (likely(!context_pending_enable(ce)))
+ clr_context_enabled(ce);
+ else
+ skip = true;
+ spin_unlock_irqrestore(&ce->guc_state.lock, flags);
+ if (unlikely(skip))
+ goto out_put;
rq = intel_context_find_active_request(ce);
if (!rq) {
@@ -867,6 +883,7 @@ static void __guc_reset_context(struct i
out_replay:
guc_reset_state(ce, head, stalled);
__unwind_incomplete_requests(ce);
+out_put:
intel_context_put(ce);
}
@@ -1618,6 +1635,13 @@ static void guc_context_cancel_request(s
guc_reset_state(ce, intel_ring_wrap(ce->ring, rq->head),
true);
}
+
+ /*
+ * XXX: Racey if context is reset, see comment in
+ * __guc_reset_context().
+ */
+ flush_work(&ce_to_guc(ce)->ct.requests.worker);
+
guc_context_unblock(ce);
}
}
@@ -2732,7 +2756,12 @@ static void guc_handle_context_reset(str
{
trace_intel_context_reset(ce);
- if (likely(!intel_context_is_banned(ce))) {
+ /*
+ * XXX: Racey if request cancellation has occurred, see comment in
+ * __guc_reset_context().
+ */
+ if (likely(!intel_context_is_banned(ce) &&
+ !context_blocked(ce))) {
capture_error_state(guc, ce);
guc_context_replay(ce);
}
From: Matthew Brost <[email protected]>
commit 88209a8ecb8b8752322908a3c3362a001bdc3a39 upstream.
Don't drop ce->guc_active.lock when unwinding a context after reset.
At one point we had to drop this because of a lock inversion but that is
no longer the case. It is much safer to hold the lock so let's do that.
Fixes: eb5e7da736f3 ("drm/i915/guc: Reset implementation for new GuC interface")
Reviewed-by: Daniele Ceraolo Spurio <[email protected]>
Signed-off-by: Matthew Brost <[email protected]>
Cc: <[email protected]>
Signed-off-by: John Harrison <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c | 4 ----
1 file changed, 4 deletions(-)
--- a/drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c
+++ b/drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c
@@ -814,8 +814,6 @@ __unwind_incomplete_requests(struct inte
continue;
list_del_init(&rq->sched.link);
- spin_unlock(&ce->guc_active.lock);
-
__i915_request_unsubmit(rq);
/* Push the request back into the queue for later resubmission. */
@@ -828,8 +826,6 @@ __unwind_incomplete_requests(struct inte
list_add_tail(&rq->sched.link, pl);
set_bit(I915_FENCE_FLAG_PQUEUE, &rq->fence.flags);
-
- spin_lock(&ce->guc_active.lock);
}
spin_unlock(&ce->guc_active.lock);
spin_unlock_irqrestore(&sched_engine->lock, flags);
From: Baoquan He <[email protected]>
commit 4aa9340584e37debef06fa99b56d064beb723891 upstream.
unreferenced object 0x38000195000 (size 4096):
comm "kexec", pid 8548, jiffies 4294953647 (age 32443.270s)
hex dump (first 32 bytes):
00 00 00 c8 20 00 00 00 00 00 00 c0 02 80 00 00 .... ...........
40 40 40 40 40 40 40 40 00 00 00 00 00 00 00 00 @@@@@@@@........
backtrace:
[<0000000011a2f199>] __vmalloc_node_range+0xc0/0x140
[<0000000081fa2752>] vzalloc+0x5a/0x70
[<0000000063a4c92d>] ipl_report_finish+0x2c/0x180
[<00000000553304da>] kexec_file_add_ipl_report+0xf4/0x150
[<00000000862d033f>] kexec_file_add_components+0x124/0x160
[<000000000d2717bb>] arch_kexec_kernel_image_load+0x62/0x90
[<000000002e0373b6>] kimage_file_alloc_init+0x1aa/0x2e0
[<0000000060f2d14f>] __do_sys_kexec_file_load+0x17c/0x2c0
[<000000008c86fe5a>] __s390x_sys_kexec_file_load+0x40/0x50
[<000000001fdb9dac>] __do_syscall+0x1bc/0x1f0
[<000000003ee4258d>] system_call+0x78/0xa0
Signed-off-by: Baoquan He <[email protected]>
Reviewed-by: Philipp Rudo <[email protected]>
Fixes: 99feaa717e55 ("s390/kexec_file: Create ipl report and pass to next kernel")
Cc: <[email protected]> # v5.2: 20c76e242e70: s390/kexec: fix return code handling
Cc: <[email protected]> # v5.2
Link: https://lore.kernel.org/r/20211116033101.GD21646@MiWiFi-R3L-srv
Signed-off-by: Heiko Carstens <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/s390/include/asm/kexec.h | 6 ++++++
arch/s390/kernel/machine_kexec_file.c | 10 ++++++++++
2 files changed, 16 insertions(+)
--- a/arch/s390/include/asm/kexec.h
+++ b/arch/s390/include/asm/kexec.h
@@ -74,6 +74,12 @@ void *kexec_file_add_components(struct k
int arch_kexec_do_relocs(int r_type, void *loc, unsigned long val,
unsigned long addr);
+#define ARCH_HAS_KIMAGE_ARCH
+
+struct kimage_arch {
+ void *ipl_buf;
+};
+
extern const struct kexec_file_ops s390_kexec_image_ops;
extern const struct kexec_file_ops s390_kexec_elf_ops;
--- a/arch/s390/kernel/machine_kexec_file.c
+++ b/arch/s390/kernel/machine_kexec_file.c
@@ -12,6 +12,7 @@
#include <linux/kexec.h>
#include <linux/module_signature.h>
#include <linux/verification.h>
+#include <linux/vmalloc.h>
#include <asm/boot_data.h>
#include <asm/ipl.h>
#include <asm/setup.h>
@@ -206,6 +207,7 @@ static int kexec_file_add_ipl_report(str
goto out;
buf.bufsz = data->report->size;
buf.memsz = buf.bufsz;
+ image->arch.ipl_buf = buf.buffer;
data->memsz += buf.memsz;
@@ -327,3 +329,11 @@ int arch_kexec_kernel_image_probe(struct
return kexec_image_probe_default(image, buf, buf_len);
}
+
+int arch_kimage_file_post_load_cleanup(struct kimage *image)
+{
+ vfree(image->arch.ipl_buf);
+ image->arch.ipl_buf = NULL;
+
+ return kexec_image_post_load_cleanup_default(image);
+}
From: Sven Schnelle <[email protected]>
commit 00b55eaf45549ce26424224d069a091c7e5d8bac upstream.
When CONFIG_VMAP_STACK is disabled, the user can enable CONFIG_STACK_CHECK,
which adds a stack overflow check to each C function in the kernel. This is
also done for functions in the vdso page. These functions are run in user
context and user stack sizes are usually different to what the kernel uses.
This might trigger the stack check although the stack size is valid.
Therefore filter the -mstack-guard and -mstack-size flags when compiling
vdso C files.
Cc: [email protected] # 5.10+
Fixes: 4bff8cb54502 ("s390: convert to GENERIC_VDSO")
Reported-by: Janosch Frank <[email protected]>
Signed-off-by: Sven Schnelle <[email protected]>
Reviewed-by: Heiko Carstens <[email protected]>
Signed-off-by: Heiko Carstens <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/s390/Makefile | 10 ++++++----
arch/s390/kernel/vdso64/Makefile | 5 +++--
2 files changed, 9 insertions(+), 6 deletions(-)
--- a/arch/s390/Makefile
+++ b/arch/s390/Makefile
@@ -79,10 +79,12 @@ KBUILD_AFLAGS_DECOMPRESSOR += $(aflags-y
KBUILD_CFLAGS_DECOMPRESSOR += $(cflags-y)
ifneq ($(call cc-option,-mstack-size=8192 -mstack-guard=128),)
-cflags-$(CONFIG_CHECK_STACK) += -mstack-size=$(STACK_SIZE)
-ifeq ($(call cc-option,-mstack-size=8192),)
-cflags-$(CONFIG_CHECK_STACK) += -mstack-guard=$(CONFIG_STACK_GUARD)
-endif
+ CC_FLAGS_CHECK_STACK := -mstack-size=$(STACK_SIZE)
+ ifeq ($(call cc-option,-mstack-size=8192),)
+ CC_FLAGS_CHECK_STACK += -mstack-guard=$(CONFIG_STACK_GUARD)
+ endif
+ export CC_FLAGS_CHECK_STACK
+ cflags-$(CONFIG_CHECK_STACK) += $(CC_FLAGS_CHECK_STACK)
endif
ifdef CONFIG_EXPOLINE
--- a/arch/s390/kernel/vdso64/Makefile
+++ b/arch/s390/kernel/vdso64/Makefile
@@ -8,8 +8,9 @@ ARCH_REL_TYPE_ABS += R_390_GOT|R_390_PLT
include $(srctree)/lib/vdso/Makefile
obj-vdso64 = vdso_user_wrapper.o note.o
obj-cvdso64 = vdso64_generic.o getcpu.o
-CFLAGS_REMOVE_getcpu.o = -pg $(CC_FLAGS_FTRACE) $(CC_FLAGS_EXPOLINE)
-CFLAGS_REMOVE_vdso64_generic.o = -pg $(CC_FLAGS_FTRACE) $(CC_FLAGS_EXPOLINE)
+VDSO_CFLAGS_REMOVE := -pg $(CC_FLAGS_FTRACE) $(CC_FLAGS_EXPOLINE) $(CC_FLAGS_CHECK_STACK)
+CFLAGS_REMOVE_getcpu.o = $(VDSO_CFLAGS_REMOVE)
+CFLAGS_REMOVE_vdso64_generic.o = $(VDSO_CFLAGS_REMOVE)
# Build rules
From: Tadeusz Struk <[email protected]>
commit 3e6db079751afd527bf3db32314ae938dc571916 upstream.
kmemdup can return a null pointer so need to check for it, otherwise
the null key will be dereferenced later in tipc_crypto_key_xmit as
can be seen in the trace [1].
Cc: [email protected]
Cc: [email protected] # 5.15, 5.14, 5.10
[1] https://syzkaller.appspot.com/bug?id=bca180abb29567b189efdbdb34cbf7ba851c2a58
Reported-by: Dmitry Vyukov <[email protected]>
Signed-off-by: Tadeusz Struk <[email protected]>
Acked-by: Ying Xue <[email protected]>
Acked-by: Jon Maloy <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/tipc/crypto.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/net/tipc/crypto.c
+++ b/net/tipc/crypto.c
@@ -597,6 +597,10 @@ static int tipc_aead_init(struct tipc_ae
tmp->cloned = NULL;
tmp->authsize = TIPC_AES_GCM_TAG_SIZE;
tmp->key = kmemdup(ukey, tipc_aead_key_size(ukey), GFP_KERNEL);
+ if (!tmp->key) {
+ tipc_aead_free(&tmp->rcu);
+ return -ENOMEM;
+ }
memcpy(&tmp->salt, ukey->key + keylen, TIPC_AES_GCM_SALT_SIZE);
atomic_set(&tmp->users, 0);
atomic64_set(&tmp->seqno, 0);
From: Vasily Gorbik <[email protected]>
commit 9a39abb7c9aab50eec4ac4421e9ee7f3de013d24 upstream.
Initial KASAN shadow memory range was picked to preserve original kernel
modules area position. With protected execution support, which might
impose addressing limitation on vmalloc area and hence affect modules
area position, current fixed KASAN shadow memory range is only making
kernel memory layout setup more complex. So move it to the very end of
available virtual space and simplify calculations.
At the same time return to previous kernel address space split. In
particular commit 0c4f2623b957 ("s390: setup kernel memory layout
early") introduced precise identity map size calculation and keeping
vmemmap left most starting from a fresh region table entry. This didn't
take into account additional mapping region requirement for potential
DCSS mapping above available physical memory. So go back to virtual
space split between 1:1 mapping & vmemmap array once vmalloc area size
is subtracted.
Cc: [email protected]
Fixes: 0c4f2623b957 ("s390: setup kernel memory layout early")
Reported-by: Gerald Schaefer <[email protected]>
Reviewed-by: Heiko Carstens <[email protected]>
Reviewed-by: Alexander Gordeev <[email protected]>
Signed-off-by: Vasily Gorbik <[email protected]>
Signed-off-by: Heiko Carstens <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/s390/Kconfig | 2 -
arch/s390/boot/startup.c | 88 ++++++++++++++++-------------------------------
2 files changed, 32 insertions(+), 58 deletions(-)
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -47,7 +47,7 @@ config ARCH_SUPPORTS_UPROBES
config KASAN_SHADOW_OFFSET
hex
depends on KASAN
- default 0x18000000000000
+ default 0x1C000000000000
config S390
def_bool y
--- a/arch/s390/boot/startup.c
+++ b/arch/s390/boot/startup.c
@@ -148,82 +148,56 @@ static void setup_ident_map_size(unsigne
static void setup_kernel_memory_layout(void)
{
- bool vmalloc_size_verified = false;
- unsigned long vmemmap_off;
- unsigned long vspace_left;
+ unsigned long vmemmap_start;
unsigned long rte_size;
unsigned long pages;
- unsigned long vmax;
pages = ident_map_size / PAGE_SIZE;
/* vmemmap contains a multiple of PAGES_PER_SECTION struct pages */
vmemmap_size = SECTION_ALIGN_UP(pages) * sizeof(struct page);
/* choose kernel address space layout: 4 or 3 levels. */
- vmemmap_off = round_up(ident_map_size, _REGION3_SIZE);
+ vmemmap_start = round_up(ident_map_size, _REGION3_SIZE);
if (IS_ENABLED(CONFIG_KASAN) ||
vmalloc_size > _REGION2_SIZE ||
- vmemmap_off + vmemmap_size + vmalloc_size + MODULES_LEN > _REGION2_SIZE)
- vmax = _REGION1_SIZE;
- else
- vmax = _REGION2_SIZE;
-
- /* keep vmemmap_off aligned to a top level region table entry */
- rte_size = vmax == _REGION1_SIZE ? _REGION2_SIZE : _REGION3_SIZE;
- MODULES_END = vmax;
- if (is_prot_virt_host()) {
- /*
- * forcing modules and vmalloc area under the ultravisor
- * secure storage limit, so that any vmalloc allocation
- * we do could be used to back secure guest storage.
- */
- adjust_to_uv_max(&MODULES_END);
- }
-
-#ifdef CONFIG_KASAN
- if (MODULES_END < vmax) {
- /* force vmalloc and modules below kasan shadow */
- MODULES_END = min(MODULES_END, KASAN_SHADOW_START);
+ vmemmap_start + vmemmap_size + vmalloc_size + MODULES_LEN >
+ _REGION2_SIZE) {
+ MODULES_END = _REGION1_SIZE;
+ rte_size = _REGION2_SIZE;
} else {
- /*
- * leave vmalloc and modules above kasan shadow but make
- * sure they don't overlap with it
- */
- vmalloc_size = min(vmalloc_size, vmax - KASAN_SHADOW_END - MODULES_LEN);
- vmalloc_size_verified = true;
- vspace_left = KASAN_SHADOW_START;
+ MODULES_END = _REGION2_SIZE;
+ rte_size = _REGION3_SIZE;
}
+ /*
+ * forcing modules and vmalloc area under the ultravisor
+ * secure storage limit, so that any vmalloc allocation
+ * we do could be used to back secure guest storage.
+ */
+ adjust_to_uv_max(&MODULES_END);
+#ifdef CONFIG_KASAN
+ /* force vmalloc and modules below kasan shadow */
+ MODULES_END = min(MODULES_END, KASAN_SHADOW_START);
#endif
MODULES_VADDR = MODULES_END - MODULES_LEN;
VMALLOC_END = MODULES_VADDR;
- if (vmalloc_size_verified) {
- VMALLOC_START = VMALLOC_END - vmalloc_size;
- } else {
- vmemmap_off = round_up(ident_map_size, rte_size);
-
- if (vmemmap_off + vmemmap_size > VMALLOC_END ||
- vmalloc_size > VMALLOC_END - vmemmap_off - vmemmap_size) {
- /*
- * allow vmalloc area to occupy up to 1/2 of
- * the rest virtual space left.
- */
- vmalloc_size = min(vmalloc_size, VMALLOC_END / 2);
- }
- VMALLOC_START = VMALLOC_END - vmalloc_size;
- vspace_left = VMALLOC_START;
- }
+ /* allow vmalloc area to occupy up to about 1/2 of the rest virtual space left */
+ vmalloc_size = min(vmalloc_size, round_down(VMALLOC_END / 2, _REGION3_SIZE));
+ VMALLOC_START = VMALLOC_END - vmalloc_size;
- pages = vspace_left / (PAGE_SIZE + sizeof(struct page));
+ /* split remaining virtual space between 1:1 mapping & vmemmap array */
+ pages = VMALLOC_START / (PAGE_SIZE + sizeof(struct page));
pages = SECTION_ALIGN_UP(pages);
- vmemmap_off = round_up(vspace_left - pages * sizeof(struct page), rte_size);
- /* keep vmemmap left most starting from a fresh region table entry */
- vmemmap_off = min(vmemmap_off, round_up(ident_map_size, rte_size));
- /* take care that identity map is lower then vmemmap */
- ident_map_size = min(ident_map_size, vmemmap_off);
+ /* keep vmemmap_start aligned to a top level region table entry */
+ vmemmap_start = round_down(VMALLOC_START - pages * sizeof(struct page), rte_size);
+ /* vmemmap_start is the future VMEM_MAX_PHYS, make sure it is within MAX_PHYSMEM */
+ vmemmap_start = min(vmemmap_start, 1UL << MAX_PHYSMEM_BITS);
+ /* make sure identity map doesn't overlay with vmemmap */
+ ident_map_size = min(ident_map_size, vmemmap_start);
vmemmap_size = SECTION_ALIGN_UP(ident_map_size / PAGE_SIZE) * sizeof(struct page);
- VMALLOC_START = max(vmemmap_off + vmemmap_size, VMALLOC_START);
- vmemmap = (struct page *)vmemmap_off;
+ /* make sure vmemmap doesn't overlay with vmalloc area */
+ VMALLOC_START = max(vmemmap_start + vmemmap_size, VMALLOC_START);
+ vmemmap = (struct page *)vmemmap_start;
}
/*
From: Ewan D. Milne <[email protected]>
commit 392006871bb26166bcfafa56faf49431c2cfaaa8 upstream.
The SCM changes set the flags in mcp->out_mb instead of mcp->in_mb so the
data was not actually being read into the mcp->mb[] array from the adapter.
Link: https://lore.kernel.org/r/[email protected]
Fixes: 9f2475fe7406 ("scsi: qla2xxx: SAN congestion management implementation")
Cc: [email protected]
Reviewed-by: Himanshu Madhani <[email protected]>
Reviewed-by: Arun Easi <[email protected]>
Signed-off-by: Ewan D. Milne <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/scsi/qla2xxx/qla_mbx.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -1695,10 +1695,8 @@ qla2x00_get_adapter_id(scsi_qla_host_t *
mcp->in_mb |= MBX_13|MBX_12|MBX_11|MBX_10;
if (IS_FWI2_CAPABLE(vha->hw))
mcp->in_mb |= MBX_19|MBX_18|MBX_17|MBX_16;
- if (IS_QLA27XX(vha->hw) || IS_QLA28XX(vha->hw)) {
- mcp->in_mb |= MBX_15;
- mcp->out_mb |= MBX_7|MBX_21|MBX_22|MBX_23;
- }
+ if (IS_QLA27XX(vha->hw) || IS_QLA28XX(vha->hw))
+ mcp->in_mb |= MBX_15|MBX_21|MBX_22|MBX_23;
mcp->tov = MBX_TOV_SECONDS;
mcp->flags = 0;
From: Damien Le Moal <[email protected]>
commit 06f6c4c6c3e8354dceddd77bd58f9a7a84c67246 upstream.
ata_dev_config_ncq_prio() and ata_dev_config_devslp() both access pages
of the IDENTIFY DEVICE data log. Before calling ata_read_log_page(),
make sure to check for the existence of the IDENTIFY DEVICE data log and
of the log page accessed using ata_identify_page_supported(). This
avoids useless error messages from ata_read_log_page() and failures with
some LLDD scsi drivers using libsas.
Reported-by: Nikolay <[email protected]>
Cc: [email protected] # 5.15
Signed-off-by: Damien Le Moal <[email protected]>
Tested-by: Matthew Perkowski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/ata/libata-core.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -2167,6 +2167,9 @@ static void ata_dev_config_ncq_prio(stru
struct ata_port *ap = dev->link->ap;
unsigned int err_mask;
+ if (!ata_identify_page_supported(dev, ATA_LOG_SATA_SETTINGS))
+ return;
+
err_mask = ata_read_log_page(dev,
ATA_LOG_IDENTIFY_DEVICE,
ATA_LOG_SATA_SETTINGS,
@@ -2443,7 +2446,8 @@ static void ata_dev_config_devslp(struct
* Check device sleep capability. Get DevSlp timing variables
* from SATA Settings page of Identify Device Data Log.
*/
- if (!ata_id_has_devslp(dev->id))
+ if (!ata_id_has_devslp(dev->id) ||
+ !ata_identify_page_supported(dev, ATA_LOG_SATA_SETTINGS))
return;
err_mask = ata_read_log_page(dev,
From: Maxim Levitsky <[email protected]>
commit b8453cdcf26020030da182f0156d7bf59ae5719f upstream.
Incorporate EFER.LMA into kvm_mmu_extended_role, as it used to compute the
guest root level and is not reflected in kvm_mmu_page_role.level when TDP
is in use. When simply running the guest, it is impossible for EFER.LMA
and kvm_mmu.root_level to get out of sync, as the guest cannot transition
from PAE paging to 64-bit paging without toggling CR0.PG, i.e. without
first bouncing through a different MMU context. And stuffing guest state
via KVM_SET_SREGS{,2} also ensures a full MMU context reset.
However, if KVM_SET_SREGS{,2} is followed by KVM_SET_NESTED_STATE, e.g. to
set guest state when migrating the VM while L2 is active, the vCPU state
will reflect L2, not L1. If L1 is using TDP for L2, then root_mmu will
have been configured using L2's state, despite not being used for L2. If
L2.EFER.LMA != L1.EFER.LMA, and L2 is using PAE paging, then root_mmu will
be configured for guest PAE paging, but will match the mmu_role for 64-bit
paging and cause KVM to not reconfigure root_mmu on the next nested VM-Exit.
Alternatively, the root_mmu's role could be invalidated after a successful
KVM_SET_NESTED_STATE that yields vcpu->arch.mmu != vcpu->arch.root_mmu,
i.e. that switches the active mmu to guest_mmu, but doing so is unnecessarily
tricky, and not even needed if L1 and L2 do have the same role (e.g., they
are both 64-bit guests and run with the same CR4).
Suggested-by: Sean Christopherson <[email protected]>
Signed-off-by: Maxim Levitsky <[email protected]>
Message-Id: <[email protected]>
Cc: [email protected]
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/include/asm/kvm_host.h | 1 +
arch/x86/kvm/mmu/mmu.c | 1 +
2 files changed, 2 insertions(+)
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -364,6 +364,7 @@ union kvm_mmu_extended_role {
unsigned int cr4_smap:1;
unsigned int cr4_smep:1;
unsigned int cr4_la57:1;
+ unsigned int efer_lma:1;
};
};
--- a/arch/x86/kvm/mmu/mmu.c
+++ b/arch/x86/kvm/mmu/mmu.c
@@ -4679,6 +4679,7 @@ static union kvm_mmu_extended_role kvm_c
/* PKEY and LA57 are active iff long mode is active. */
ext.cr4_pke = ____is_efer_lma(regs) && ____is_cr4_pke(regs);
ext.cr4_la57 = ____is_efer_lma(regs) && ____is_cr4_la57(regs);
+ ext.efer_lma = ____is_efer_lma(regs);
}
ext.valid = 1;
From: Christophe Leroy <[email protected]>
commit 1e35eba4055149c578baf0318d2f2f89ea3c44a0 upstream.
As spotted and explained in commit c12ab8dbc492 ("powerpc/8xx: Fix
Oops with STRICT_KERNEL_RWX without DEBUG_RODATA_TEST"), the selection
of STRICT_KERNEL_RWX without selecting DEBUG_RODATA_TEST has spotted
the lack of the DIRTY bit in the pinned kernel data TLBs.
This problem should have been detected a lot earlier if things had
been working as expected. But due to an incredible level of chance or
mishap, this went undetected because of a set of bugs: In fact the
DTLBs were not pinned, because instead of setting the reserve bit
in MD_CTR, it was set in MI_CTR that is the register for ITLBs.
But then, another huge bug was there: the physical address was
reset to 0 at the boundary between RO and RW areas, leading to the
same physical space being mapped at both 0xc0000000 and 0xc8000000.
This had by miracle no consequence until now because the entry was
not really pinned so it was overwritten soon enough to go undetected.
Of course, now that we really pin the DTLBs, it must be fixed as well.
Fixes: f76c8f6d257c ("powerpc/8xx: Add function to set pinned TLBs")
Cc: [email protected] # v5.8+
Signed-off-by: Christophe Leroy <[email protected]>
Depends-on: c12ab8dbc492 ("powerpc/8xx: Fix Oops with STRICT_KERNEL_RWX without DEBUG_RODATA_TEST")
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/a21e9a057fe2d247a535aff0d157a54eefee017a.1636963688.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/kernel/head_8xx.S | 13 +++++++------
1 file changed, 7 insertions(+), 6 deletions(-)
--- a/arch/powerpc/kernel/head_8xx.S
+++ b/arch/powerpc/kernel/head_8xx.S
@@ -733,6 +733,7 @@ _GLOBAL(mmu_pin_tlb)
#ifdef CONFIG_PIN_TLB_DATA
LOAD_REG_IMMEDIATE(r6, PAGE_OFFSET)
LOAD_REG_IMMEDIATE(r7, MI_SVALID | MI_PS8MEG | _PMD_ACCESSED)
+ li r8, 0
#ifdef CONFIG_PIN_TLB_IMMR
li r0, 3
#else
@@ -741,26 +742,26 @@ _GLOBAL(mmu_pin_tlb)
mtctr r0
cmpwi r4, 0
beq 4f
- LOAD_REG_IMMEDIATE(r8, 0xf0 | _PAGE_RO | _PAGE_SPS | _PAGE_SH | _PAGE_PRESENT)
LOAD_REG_ADDR(r9, _sinittext)
2: ori r0, r6, MD_EVALID
+ ori r12, r8, 0xf0 | _PAGE_RO | _PAGE_SPS | _PAGE_SH | _PAGE_PRESENT
mtspr SPRN_MD_CTR, r5
mtspr SPRN_MD_EPN, r0
mtspr SPRN_MD_TWC, r7
- mtspr SPRN_MD_RPN, r8
+ mtspr SPRN_MD_RPN, r12
addi r5, r5, 0x100
addis r6, r6, SZ_8M@h
addis r8, r8, SZ_8M@h
cmplw r6, r9
bdnzt lt, 2b
-
-4: LOAD_REG_IMMEDIATE(r8, 0xf0 | _PAGE_DIRTY | _PAGE_SPS | _PAGE_SH | _PAGE_PRESENT)
+4:
2: ori r0, r6, MD_EVALID
+ ori r12, r8, 0xf0 | _PAGE_DIRTY | _PAGE_SPS | _PAGE_SH | _PAGE_PRESENT
mtspr SPRN_MD_CTR, r5
mtspr SPRN_MD_EPN, r0
mtspr SPRN_MD_TWC, r7
- mtspr SPRN_MD_RPN, r8
+ mtspr SPRN_MD_RPN, r12
addi r5, r5, 0x100
addis r6, r6, SZ_8M@h
addis r8, r8, SZ_8M@h
@@ -781,7 +782,7 @@ _GLOBAL(mmu_pin_tlb)
#endif
#if defined(CONFIG_PIN_TLB_IMMR) || defined(CONFIG_PIN_TLB_DATA)
lis r0, (MD_RSV4I | MD_TWAM)@h
- mtspr SPRN_MI_CTR, r0
+ mtspr SPRN_MD_CTR, r0
#endif
mtspr SPRN_SRR1, r10
mtspr SPRN_SRR0, r11
From: Nathan Chancellor <[email protected]>
commit ffb92ce826fd801acb0f4e15b75e4ddf0d189bde upstream.
Patch series "Fixes for ARCH=hexagon allmodconfig", v2.
This series fixes some issues noticed with ARCH=hexagon allmodconfig.
This patch (of 3):
When building ARCH=hexagon allmodconfig, the following errors occur:
ERROR: modpost: "__raw_readsl" [drivers/i3c/master/svc-i3c-master.ko] undefined!
ERROR: modpost: "__raw_writesl" [drivers/i3c/master/dw-i3c-master.ko] undefined!
ERROR: modpost: "__raw_readsl" [drivers/i3c/master/dw-i3c-master.ko] undefined!
ERROR: modpost: "__raw_writesl" [drivers/i3c/master/i3c-master-cdns.ko] undefined!
ERROR: modpost: "__raw_readsl" [drivers/i3c/master/i3c-master-cdns.ko] undefined!
Export these symbols so that modules can use them without any errors.
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 013bf24c3829 ("Hexagon: Provide basic implementation and/or stubs for I/O routines.")
Signed-off-by: Nathan Chancellor <[email protected]>
Acked-by: Brian Cain <[email protected]>
Cc: Nick Desaulniers <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/hexagon/lib/io.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/arch/hexagon/lib/io.c
+++ b/arch/hexagon/lib/io.c
@@ -27,6 +27,7 @@ void __raw_readsw(const void __iomem *ad
*dst++ = *src;
}
+EXPORT_SYMBOL(__raw_readsw);
/*
* __raw_writesw - read words a short at a time
@@ -47,6 +48,7 @@ void __raw_writesw(void __iomem *addr, c
}
+EXPORT_SYMBOL(__raw_writesw);
/* Pretty sure len is pre-adjusted for the length of the access already */
void __raw_readsl(const void __iomem *addr, void *data, int len)
@@ -62,6 +64,7 @@ void __raw_readsl(const void __iomem *ad
}
+EXPORT_SYMBOL(__raw_readsl);
void __raw_writesl(void __iomem *addr, const void *data, int len)
{
@@ -76,3 +79,4 @@ void __raw_writesl(void __iomem *addr, c
}
+EXPORT_SYMBOL(__raw_writesl);
From: Alexander Mikhalitsyn <[email protected]>
commit 126e8bee943e9926238c891e2df5b5573aee76bc upstream.
Patch series "shm: shm_rmid_forced feature fixes".
Some time ago I met kernel crash after CRIU restore procedure,
fortunately, it was CRIU restore, so, I had dump files and could do
restore many times and crash reproduced easily. After some
investigation I've constructed the minimal reproducer. It was found
that it's use-after-free and it happens only if sysctl
kernel.shm_rmid_forced = 1.
The key of the problem is that the exit_shm() function not handles shp's
object destroy when task->sysvshm.shm_clist contains items from
different IPC namespaces. In most cases this list will contain only
items from one IPC namespace.
How can this list contain object from different namespaces? The
exit_shm() function is designed to clean up this list always when
process leaves IPC namespace. But we made a mistake a long time ago and
did not add a exit_shm() call into the setns() syscall procedures.
The first idea was just to add this call to setns() syscall but it
obviously changes semantics of setns() syscall and that's
userspace-visible change. So, I gave up on this idea.
The first real attempt to address the issue was just to omit forced
destroy if we meet shp object not from current task IPC namespace [1].
But that was not the best idea because task->sysvshm.shm_clist was
protected by rwsem which belongs to current task IPC namespace. It
means that list corruption may occur.
Second approach is just extend exit_shm() to properly handle shp's from
different IPC namespaces [2]. This is really non-trivial thing, I've
put a lot of effort into that but not believed that it's possible to
make it fully safe, clean and clear.
Thanks to the efforts of Manfred Spraul working an elegant solution was
designed. Thanks a lot, Manfred!
Eric also suggested the way to address the issue in ("[RFC][PATCH] shm:
In shm_exit destroy all created and never attached segments") Eric's
idea was to maintain a list of shm_clists one per IPC namespace, use
lock-less lists. But there is some extra memory consumption-related
concerns.
An alternative solution which was suggested by me was implemented in
("shm: reset shm_clist on setns but omit forced shm destroy"). The idea
is pretty simple, we add exit_shm() syscall to setns() but DO NOT
destroy shm segments even if sysctl kernel.shm_rmid_forced = 1, we just
clean up the task->sysvshm.shm_clist list.
This chages semantics of setns() syscall a little bit but in comparision
to the "naive" solution when we just add exit_shm() without any special
exclusions this looks like a safer option.
[1] https://lkml.org/lkml/2021/7/6/1108
[2] https://lkml.org/lkml/2021/7/14/736
This patch (of 2):
Let's produce a warning if we trying to remove non-existing IPC object
from IPC namespace kht/idr structures.
This allows us to catch possible bugs when the ipc_rmid() function was
called with inconsistent struct ipc_ids*, struct kern_ipc_perm*
arguments.
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Co-developed-by: Manfred Spraul <[email protected]>
Signed-off-by: Manfred Spraul <[email protected]>
Signed-off-by: Alexander Mikhalitsyn <[email protected]>
Cc: "Eric W. Biederman" <[email protected]>
Cc: Davidlohr Bueso <[email protected]>
Cc: Greg KH <[email protected]>
Cc: Andrei Vagin <[email protected]>
Cc: Pavel Tikhomirov <[email protected]>
Cc: Vasily Averin <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
ipc/util.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/ipc/util.c
+++ b/ipc/util.c
@@ -447,8 +447,8 @@ static int ipcget_public(struct ipc_name
static void ipc_kht_remove(struct ipc_ids *ids, struct kern_ipc_perm *ipcp)
{
if (ipcp->key != IPC_PRIVATE)
- rhashtable_remove_fast(&ids->key_ht, &ipcp->khtnode,
- ipc_kht_params);
+ WARN_ON_ONCE(rhashtable_remove_fast(&ids->key_ht, &ipcp->khtnode,
+ ipc_kht_params));
}
/**
@@ -498,7 +498,7 @@ void ipc_rmid(struct ipc_ids *ids, struc
{
int idx = ipcid_to_idx(ipcp->id);
- idr_remove(&ids->ipcs_idr, idx);
+ WARN_ON_ONCE(idr_remove(&ids->ipcs_idr, idx) != ipcp);
ipc_kht_remove(ids, ipcp);
ids->in_use--;
ipcp->deleted = true;
From: Sven Schnelle <[email protected]>
commit bec05f33ebc1006899c6d3e59a00c58881fe7626 upstream.
sticon_build_attr() checked the reverse argument and flipped
background and foreground color, but returned the non-reverse
value afterwards. Fix this and also add two local variables
for foreground and background color to make the code easier
to read.
Signed-off-by: Sven Schnelle <[email protected]>
Cc: <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/video/console/sticon.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
--- a/drivers/video/console/sticon.c
+++ b/drivers/video/console/sticon.c
@@ -332,13 +332,13 @@ static u8 sticon_build_attr(struct vc_da
bool blink, bool underline, bool reverse,
bool italic)
{
- u8 attr = ((color & 0x70) >> 1) | ((color & 7));
+ u8 fg = color & 7;
+ u8 bg = (color & 0x70) >> 4;
- if (reverse) {
- color = ((color >> 3) & 0x7) | ((color & 0x7) << 3);
- }
-
- return attr;
+ if (reverse)
+ return (fg << 3) | bg;
+ else
+ return (bg << 3) | fg;
}
static void sticon_invert_region(struct vc_data *conp, u16 *p, int count)
From: Ard Biesheuvel <[email protected]>
commit 825c43f50e3aa811a291ffcb40e02fbf6d91ba86 upstream.
The kmap_local conversion broke the ARM architecture, because the new
code assumes that all PTEs used for creating kmaps form a linear array
in memory, and uses array indexing to look up the kmap PTE belonging to
a certain kmap index.
On ARM, this cannot work, not only because the PTE pages may be
non-adjacent in memory, but also because ARM/!LPAE interleaves hardware
entries and extended entries (carrying software-only bits) in a way that
is not compatible with array indexing.
Fortunately, this only seems to affect configurations with more than 8
CPUs, due to the way the per-CPU kmap slots are organized in memory.
Work around this by permitting an architecture to set a Kconfig symbol
that signifies that the kmap PTEs do not form a lineary array in memory,
and so the only way to locate the appropriate one is to walk the page
tables.
Link: https://lore.kernel.org/linux-arm-kernel/[email protected]/
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 2a15ba82fa6c ("ARM: highmem: Switch to generic kmap atomic")
Signed-off-by: Ard Biesheuvel <[email protected]>
Reported-by: Quanyang Wang <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Acked-by: Russell King (Oracle) <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arm/Kconfig | 1 +
mm/Kconfig | 3 +++
mm/highmem.c | 32 +++++++++++++++++++++-----------
3 files changed, 25 insertions(+), 11 deletions(-)
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1455,6 +1455,7 @@ config HIGHMEM
bool "High Memory Support"
depends on MMU
select KMAP_LOCAL
+ select KMAP_LOCAL_NON_LINEAR_PTE_ARRAY
help
The address space of ARM processors is only 4 Gigabytes large
and it has to accommodate user address space, kernel address
--- a/mm/Kconfig
+++ b/mm/Kconfig
@@ -887,6 +887,9 @@ config MAPPING_DIRTY_HELPERS
config KMAP_LOCAL
bool
+config KMAP_LOCAL_NON_LINEAR_PTE_ARRAY
+ bool
+
# struct io_mapping based helper. Selected by drivers that need them
config IO_MAPPING
bool
--- a/mm/highmem.c
+++ b/mm/highmem.c
@@ -504,16 +504,22 @@ static inline int kmap_local_calc_idx(in
static pte_t *__kmap_pte;
-static pte_t *kmap_get_pte(void)
+static pte_t *kmap_get_pte(unsigned long vaddr, int idx)
{
+ if (IS_ENABLED(CONFIG_KMAP_LOCAL_NON_LINEAR_PTE_ARRAY))
+ /*
+ * Set by the arch if __kmap_pte[-idx] does not produce
+ * the correct entry.
+ */
+ return virt_to_kpte(vaddr);
if (!__kmap_pte)
__kmap_pte = virt_to_kpte(__fix_to_virt(FIX_KMAP_BEGIN));
- return __kmap_pte;
+ return &__kmap_pte[-idx];
}
void *__kmap_local_pfn_prot(unsigned long pfn, pgprot_t prot)
{
- pte_t pteval, *kmap_pte = kmap_get_pte();
+ pte_t pteval, *kmap_pte;
unsigned long vaddr;
int idx;
@@ -525,9 +531,10 @@ void *__kmap_local_pfn_prot(unsigned lon
preempt_disable();
idx = arch_kmap_local_map_idx(kmap_local_idx_push(), pfn);
vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
- BUG_ON(!pte_none(*(kmap_pte - idx)));
+ kmap_pte = kmap_get_pte(vaddr, idx);
+ BUG_ON(!pte_none(*kmap_pte));
pteval = pfn_pte(pfn, prot);
- arch_kmap_local_set_pte(&init_mm, vaddr, kmap_pte - idx, pteval);
+ arch_kmap_local_set_pte(&init_mm, vaddr, kmap_pte, pteval);
arch_kmap_local_post_map(vaddr, pteval);
current->kmap_ctrl.pteval[kmap_local_idx()] = pteval;
preempt_enable();
@@ -560,7 +567,7 @@ EXPORT_SYMBOL(__kmap_local_page_prot);
void kunmap_local_indexed(void *vaddr)
{
unsigned long addr = (unsigned long) vaddr & PAGE_MASK;
- pte_t *kmap_pte = kmap_get_pte();
+ pte_t *kmap_pte;
int idx;
if (addr < __fix_to_virt(FIX_KMAP_END) ||
@@ -585,8 +592,9 @@ void kunmap_local_indexed(void *vaddr)
idx = arch_kmap_local_unmap_idx(kmap_local_idx(), addr);
WARN_ON_ONCE(addr != __fix_to_virt(FIX_KMAP_BEGIN + idx));
+ kmap_pte = kmap_get_pte(addr, idx);
arch_kmap_local_pre_unmap(addr);
- pte_clear(&init_mm, addr, kmap_pte - idx);
+ pte_clear(&init_mm, addr, kmap_pte);
arch_kmap_local_post_unmap(addr);
current->kmap_ctrl.pteval[kmap_local_idx()] = __pte(0);
kmap_local_idx_pop();
@@ -608,7 +616,7 @@ EXPORT_SYMBOL(kunmap_local_indexed);
void __kmap_local_sched_out(void)
{
struct task_struct *tsk = current;
- pte_t *kmap_pte = kmap_get_pte();
+ pte_t *kmap_pte;
int i;
/* Clear kmaps */
@@ -635,8 +643,9 @@ void __kmap_local_sched_out(void)
idx = arch_kmap_local_map_idx(i, pte_pfn(pteval));
addr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
+ kmap_pte = kmap_get_pte(addr, idx);
arch_kmap_local_pre_unmap(addr);
- pte_clear(&init_mm, addr, kmap_pte - idx);
+ pte_clear(&init_mm, addr, kmap_pte);
arch_kmap_local_post_unmap(addr);
}
}
@@ -644,7 +653,7 @@ void __kmap_local_sched_out(void)
void __kmap_local_sched_in(void)
{
struct task_struct *tsk = current;
- pte_t *kmap_pte = kmap_get_pte();
+ pte_t *kmap_pte;
int i;
/* Restore kmaps */
@@ -664,7 +673,8 @@ void __kmap_local_sched_in(void)
/* See comment in __kmap_local_sched_out() */
idx = arch_kmap_local_map_idx(i, pte_pfn(pteval));
addr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
- set_pte_at(&init_mm, addr, kmap_pte - idx, pteval);
+ kmap_pte = kmap_get_pte(addr, idx);
+ set_pte_at(&init_mm, addr, kmap_pte, pteval);
arch_kmap_local_post_map(addr, pteval);
}
}
From: Thomas Zimmermann <[email protected]>
commit 995f54ea962e03ec08b8bc6a4fe11a32b420edd3 upstream.
The GEM CMA helpers allocate non-coherent (i.e., cached) backing storage
with dma_alloc_noncoherent(), but release it with dma_free_wc(). Fix this
with a call to dma_free_noncoherent(). Writecombining storage is still
released with dma_free_wc().
Signed-off-by: Thomas Zimmermann <[email protected]>
Fixes: cf8ccbc72d61 ("drm: Add support for GEM buffers backed by non-coherent memory")
Acked-by: Paul Cercueil <[email protected]>
Cc: Thomas Zimmermann <[email protected]>
Cc: Maarten Lankhorst <[email protected]>
Cc: Maxime Ripard <[email protected]>
Cc: David Airlie <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: [email protected]
Cc: <[email protected]> # v5.14+
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/drm_gem_cma_helper.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
--- a/drivers/gpu/drm/drm_gem_cma_helper.c
+++ b/drivers/gpu/drm/drm_gem_cma_helper.c
@@ -210,8 +210,13 @@ void drm_gem_cma_free_object(struct drm_
dma_buf_vunmap(gem_obj->import_attach->dmabuf, &map);
drm_prime_gem_destroy(gem_obj, cma_obj->sgt);
} else if (cma_obj->vaddr) {
- dma_free_wc(gem_obj->dev->dev, cma_obj->base.size,
- cma_obj->vaddr, cma_obj->paddr);
+ if (cma_obj->map_noncoherent)
+ dma_free_noncoherent(gem_obj->dev->dev, cma_obj->base.size,
+ cma_obj->vaddr, cma_obj->paddr,
+ DMA_TO_DEVICE);
+ else
+ dma_free_wc(gem_obj->dev->dev, cma_obj->base.size,
+ cma_obj->vaddr, cma_obj->paddr);
}
drm_gem_object_release(gem_obj);
From: Mina Almasry <[email protected]>
commit cc30042df6fcc82ea18acf0dace831503e60a0b7 upstream.
Currently in the is_continue case in hugetlb_mcopy_atomic_pte(), if we
bail out using "goto out_release_unlock;" in the cases where idx >=
size, or !huge_pte_none(), the code will detect that new_pagecache_page
== false, and so call restore_reserve_on_error(). In this case I see
restore_reserve_on_error() delete the reservation, and the following
call to remove_inode_hugepages() will increment h->resv_hugepages
causing a 100% reproducible leak.
We should treat the is_continue case similar to adding a page into the
pagecache and set new_pagecache_page to true, to indicate that there is
no reservation to restore on the error path, and we need not call
restore_reserve_on_error(). Rename new_pagecache_page to
page_in_pagecache to make that clear.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: c7b1850dfb41 ("hugetlb: don't pass page cache pages to restore_reserve_on_error")
Signed-off-by: Mina Almasry <[email protected]>
Reported-by: James Houghton <[email protected]>
Reviewed-by: Mike Kravetz <[email protected]>
Cc: Wei Xu <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/hugetlb.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -5236,13 +5236,14 @@ int hugetlb_mcopy_atomic_pte(struct mm_s
int ret = -ENOMEM;
struct page *page;
int writable;
- bool new_pagecache_page = false;
+ bool page_in_pagecache = false;
if (is_continue) {
ret = -EFAULT;
page = find_lock_page(mapping, idx);
if (!page)
goto out;
+ page_in_pagecache = true;
} else if (!*pagep) {
/* If a page already exists, then it's UFFDIO_COPY for
* a non-missing case. Return -EEXIST.
@@ -5330,7 +5331,7 @@ int hugetlb_mcopy_atomic_pte(struct mm_s
ret = huge_add_to_page_cache(page, mapping, idx);
if (ret)
goto out_release_nounlock;
- new_pagecache_page = true;
+ page_in_pagecache = true;
}
ptl = huge_pte_lockptr(h, dst_mm, dst_pte);
@@ -5394,7 +5395,7 @@ out_release_unlock:
if (vm_shared || is_continue)
unlock_page(page);
out_release_nounlock:
- if (!new_pagecache_page)
+ if (!page_in_pagecache)
restore_reserve_on_error(h, dst_vma, dst_addr, page);
put_page(page);
goto out;
From: Kees Cook <[email protected]>
commit d1faacbf67b1944f0e0c618dc581d929263f6fe9 upstream.
This reverts commit d07f3b081ee632268786601f55e1334d1f68b997.
pstore-blk was fixed to avoid the unwanted APIs in commit 7bb9557b48fc
("pstore/blk: Use the normal block device I/O path"), which landed in
the same release as the commit adding BROKEN.
Cc: Jens Axboe <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: [email protected]
Signed-off-by: Kees Cook <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/pstore/Kconfig | 1 -
1 file changed, 1 deletion(-)
--- a/fs/pstore/Kconfig
+++ b/fs/pstore/Kconfig
@@ -173,7 +173,6 @@ config PSTORE_BLK
tristate "Log panic/oops to a block device"
depends on PSTORE
depends on BLOCK
- depends on BROKEN
select PSTORE_ZONE
default n
help
From: Johannes Berg <[email protected]>
commit c033a38a81bc539d6c0db8c5387e0b14d819a0cf upstream.
In commit 8c89f7b3d3f2 ("mac80211: Use flex-array for radiotap header
bitmap") we accidentally pointed the position to the wrong place, so
we overwrite a present bitmap, and thus cause all kinds of trouble.
To see the issue, note that the previous code read:
pos = (void *)(it_present + 1);
The requirement now is that we need to calculate pos via it_optional,
to not trigger the compiler hardening checks, as:
pos = (void *)&rthdr->it_optional[...];
Rewriting the original expression, we get (obviously, since that just
adds "+ x - x" terms):
pos = (void *)(it_present + 1 + rthdr->it_optional - rthdr->it_optional)
and moving the "+ rthdr->it_optional" outside to be used as an array:
pos = (void *)&rthdr->it_optional[it_present + 1 - rthdr->it_optional];
The original is off by one, fix it.
Cc: [email protected]
Fixes: 8c89f7b3d3f2 ("mac80211: Use flex-array for radiotap header bitmap")
Reported-by: Sid Hayn <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
Tested-by: Sid Hayn <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Link: https://lore.kernel.org/r/20211109100203.c61007433ed6.I1dade57aba7de9c4f48d68249adbae62636fd98c@changeid
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/mac80211/rx.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -364,7 +364,7 @@ ieee80211_add_rx_radiotap_header(struct
* the compiler to think we have walked past the end of the
* struct member.
*/
- pos = (void *)&rthdr->it_optional[it_present - rthdr->it_optional];
+ pos = (void *)&rthdr->it_optional[it_present + 1 - rthdr->it_optional];
/* the order of the following fields is important */
From: Roman Li <[email protected]>
commit 55eea8ef98641f6e1e1c202bd3a49a57c1dd4059 upstream.
[Why]
Some monitors exhibit corruption at 16bpp DSC.
[How]
- Add helpers for patching edid caps.
- Use it for limiting DSC target bitrate to 15bpp for known monitors
Reviewed-by: Rodrigo Siqueira <[email protected]>
Acked-by: Qingqing Zhuo <[email protected]>
Signed-off-by: Roman Li <[email protected]>
Cc: [email protected]
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c | 35 ++++++++++++++
1 file changed, 35 insertions(+)
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c
@@ -40,6 +40,39 @@
#include "dm_helpers.h"
+struct monitor_patch_info {
+ unsigned int manufacturer_id;
+ unsigned int product_id;
+ void (*patch_func)(struct dc_edid_caps *edid_caps, unsigned int param);
+ unsigned int patch_param;
+};
+static void set_max_dsc_bpp_limit(struct dc_edid_caps *edid_caps, unsigned int param);
+
+static const struct monitor_patch_info monitor_patch_table[] = {
+{0x6D1E, 0x5BBF, set_max_dsc_bpp_limit, 15},
+{0x6D1E, 0x5B9A, set_max_dsc_bpp_limit, 15},
+};
+
+static void set_max_dsc_bpp_limit(struct dc_edid_caps *edid_caps, unsigned int param)
+{
+ if (edid_caps)
+ edid_caps->panel_patch.max_dsc_target_bpp_limit = param;
+}
+
+static int amdgpu_dm_patch_edid_caps(struct dc_edid_caps *edid_caps)
+{
+ int i, ret = 0;
+
+ for (i = 0; i < ARRAY_SIZE(monitor_patch_table); i++)
+ if ((edid_caps->manufacturer_id == monitor_patch_table[i].manufacturer_id)
+ && (edid_caps->product_id == monitor_patch_table[i].product_id)) {
+ monitor_patch_table[i].patch_func(edid_caps, monitor_patch_table[i].patch_param);
+ ret++;
+ }
+
+ return ret;
+}
+
/* dm_helpers_parse_edid_caps
*
* Parse edid caps
@@ -125,6 +158,8 @@ enum dc_edid_status dm_helpers_parse_edi
kfree(sads);
kfree(sadb);
+ amdgpu_dm_patch_edid_caps(edid_caps);
+
return result;
}
From: Felix Fietkau <[email protected]>
commit f6ab25d41b18f3d26883cb9c20875e1a85c4f05b upstream.
When __ieee80211_select_queue is called, skb->cb has not been cleared yet,
which means that info->control.flags can contain garbage.
In some cases this leads to IEEE80211_TX_CTRL_DONT_REORDER being set, causing
packets marked for other queues to randomly end up in BE instead.
This flag only needs to be checked in ieee80211_select_queue_80211, since
the radiotap parser is the only piece of code that sets it
Fixes: 66d06c84730c ("mac80211: adhere to Tx control flag that prevents frame reordering")
Cc: [email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/mac80211/wme.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
--- a/net/mac80211/wme.c
+++ b/net/mac80211/wme.c
@@ -143,7 +143,6 @@ u16 ieee80211_select_queue_80211(struct
u16 __ieee80211_select_queue(struct ieee80211_sub_if_data *sdata,
struct sta_info *sta, struct sk_buff *skb)
{
- struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
struct mac80211_qos_map *qos_map;
bool qos;
@@ -156,7 +155,7 @@ u16 __ieee80211_select_queue(struct ieee
else
qos = false;
- if (!qos || (info->control.flags & IEEE80211_TX_CTRL_DONT_REORDER)) {
+ if (!qos) {
skb->priority = 0; /* required for correct WPA/11i MIC */
return IEEE80211_AC_BE;
}
From: 黄乐 <[email protected]>
commit c5adbb3af051079f35abfa26551107e2c653087f upstream.
In vcpu_load_eoi_exitmap(), currently the eoi_exit_bitmap[4] array is
initialized only when Hyper-V context is available, in other path it is
just passed to kvm_x86_ops.load_eoi_exitmap() directly from on the stack,
which would cause unexpected interrupt delivery/handling issues, e.g. an
*old* linux kernel that relies on PIT to do clock calibration on KVM might
randomly fail to boot.
Fix it by passing ioapic_handled_vectors to load_eoi_exitmap() when Hyper-V
context is not available.
Fixes: f2bc14b69c38 ("KVM: x86: hyper-v: Prepare to meet unallocated Hyper-V context")
Cc: [email protected]
Reviewed-by: Vitaly Kuznetsov <[email protected]>
Signed-off-by: Huang Le <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kvm/x86.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -9429,12 +9429,16 @@ static void vcpu_load_eoi_exitmap(struct
if (!kvm_apic_hw_enabled(vcpu->arch.apic))
return;
- if (to_hv_vcpu(vcpu))
+ if (to_hv_vcpu(vcpu)) {
bitmap_or((ulong *)eoi_exit_bitmap,
vcpu->arch.ioapic_handled_vectors,
to_hv_synic(vcpu)->vec_bitmap, 256);
+ static_call(kvm_x86_load_eoi_exitmap)(vcpu, eoi_exit_bitmap);
+ return;
+ }
- static_call(kvm_x86_load_eoi_exitmap)(vcpu, eoi_exit_bitmap);
+ static_call(kvm_x86_load_eoi_exitmap)(
+ vcpu, (u64 *)vcpu->arch.ioapic_handled_vectors);
}
void kvm_arch_mmu_notifier_invalidate_range(struct kvm *kvm,
From: Nicholas Piggin <[email protected]>
commit 5d5e4522a7f404d1a96fd6c703989d32a9c9568d upstream.
printk from NMI context relies on irq work being raised on the local CPU
to print to console. This can be a problem if the NMI was raised by a
lockup detector to print lockup stack and regs, because the CPU may not
enable irqs (because it is locked up).
Introduce printk_trigger_flush() that can be called another CPU to try
to get those messages to the console, call that where printk_safe_flush
was previously called.
Fixes: 93d102f094be ("printk: remove safe buffers")
Cc: [email protected] # 5.15
Signed-off-by: Nicholas Piggin <[email protected]>
Reviewed-by: Petr Mladek <[email protected]>
Reviewed-by: John Ogness <[email protected]>
Signed-off-by: Petr Mladek <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/kernel/watchdog.c | 6 ++++++
include/linux/printk.h | 4 ++++
kernel/printk/printk.c | 5 +++++
lib/nmi_backtrace.c | 6 ++++++
4 files changed, 21 insertions(+)
--- a/arch/powerpc/kernel/watchdog.c
+++ b/arch/powerpc/kernel/watchdog.c
@@ -187,6 +187,12 @@ static void watchdog_smp_panic(int cpu,
if (sysctl_hardlockup_all_cpu_backtrace)
trigger_allbutself_cpu_backtrace();
+ /*
+ * Force flush any remote buffers that might be stuck in IRQ context
+ * and therefore could not run their irq_work.
+ */
+ printk_trigger_flush();
+
if (hardlockup_panic)
nmi_panic(NULL, "Hard LOCKUP");
--- a/include/linux/printk.h
+++ b/include/linux/printk.h
@@ -198,6 +198,7 @@ void dump_stack_print_info(const char *l
void show_regs_print_info(const char *log_lvl);
extern asmlinkage void dump_stack_lvl(const char *log_lvl) __cold;
extern asmlinkage void dump_stack(void) __cold;
+void printk_trigger_flush(void);
#else
static inline __printf(1, 0)
int vprintk(const char *s, va_list args)
@@ -274,6 +275,9 @@ static inline void dump_stack_lvl(const
static inline void dump_stack(void)
{
}
+static inline void printk_trigger_flush(void)
+{
+}
#endif
#ifdef CONFIG_SMP
--- a/kernel/printk/printk.c
+++ b/kernel/printk/printk.c
@@ -3252,6 +3252,11 @@ void defer_console_output(void)
preempt_enable();
}
+void printk_trigger_flush(void)
+{
+ defer_console_output();
+}
+
int vprintk_deferred(const char *fmt, va_list args)
{
int r;
--- a/lib/nmi_backtrace.c
+++ b/lib/nmi_backtrace.c
@@ -75,6 +75,12 @@ void nmi_trigger_cpumask_backtrace(const
touch_softlockup_watchdog();
}
+ /*
+ * Force flush any remote buffers that might be stuck in IRQ context
+ * and therefore could not run their irq_work.
+ */
+ printk_trigger_flush();
+
clear_bit_unlock(0, &backtrace_flag);
put_cpu();
}
From: Matthew Brost <[email protected]>
commit c39f51cc980dd918c5b3da61d54c4725785e766e upstream.
When unwinding requests on a reset context, if other requests in the
context are in the priority list the requests could be resubmitted out
of seqno order. Traverse the list of active requests in reverse and
append to the head of the priority list to fix this.
Fixes: eb5e7da736f3 ("drm/i915/guc: Reset implementation for new GuC interface")
Signed-off-by: Matthew Brost <[email protected]>
Reviewed-by: Daniele Ceraolo Spurio <[email protected]>
Cc: <[email protected]>
Signed-off-by: John Harrison <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c
+++ b/drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c
@@ -807,9 +807,9 @@ __unwind_incomplete_requests(struct inte
spin_lock_irqsave(&sched_engine->lock, flags);
spin_lock(&ce->guc_active.lock);
- list_for_each_entry_safe(rq, rn,
- &ce->guc_active.requests,
- sched.link) {
+ list_for_each_entry_safe_reverse(rq, rn,
+ &ce->guc_active.requests,
+ sched.link) {
if (i915_request_completed(rq))
continue;
@@ -824,7 +824,7 @@ __unwind_incomplete_requests(struct inte
}
GEM_BUG_ON(i915_sched_engine_is_empty(sched_engine));
- list_add_tail(&rq->sched.link, pl);
+ list_add(&rq->sched.link, pl);
set_bit(I915_FENCE_FLAG_PQUEUE, &rq->fence.flags);
}
spin_unlock(&ce->guc_active.lock);
From: Johan Hovold <[email protected]>
commit 5591c8f79db1729d9c5ac7f5b4d3a5c26e262d93 upstream.
USB control-message timeouts are specified in milliseconds and should
specifically not vary with CONFIG_HZ.
Fixes: 5320918b9a87 ("drm/udl: initial UDL driver (v4)")
Cc: [email protected] # 3.4
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/udl/udl_connector.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/gpu/drm/udl/udl_connector.c
+++ b/drivers/gpu/drm/udl/udl_connector.c
@@ -30,7 +30,7 @@ static int udl_get_edid_block(void *data
int bval = (i + block * EDID_LENGTH) << 8;
ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
0x02, (0x80 | (0x02 << 5)), bval,
- 0xA1, read_buff, 2, HZ);
+ 0xA1, read_buff, 2, 1000);
if (ret < 1) {
DRM_ERROR("Read EDID byte %d failed err %x\n", i, ret);
kfree(read_buff);
From: Anand K Mistry <[email protected]>
commit 8244a3bc27b3efd057da154b8d7e414670d5044f upstream.
drm_gem_ttm_mmap() drops a reference to the gem object on success. If
the gem object's refcount == 1 on entry to drm_gem_prime_mmap(), that
drop will free the gem object, and the subsequent drm_gem_object_get()
will be a UAF. Fix by grabbing a reference before calling the mmap
helper.
This issue was forseen when the reference dropping was adding in
commit 9786b65bc61ac ("drm/ttm: fix mmap refcounting"):
"For that to work properly the drm_gem_object_get() call in
drm_gem_ttm_mmap() must be moved so it happens before calling
obj->funcs->mmap(), otherwise the gem refcount would go down
to zero."
Signed-off-by: Anand K Mistry <[email protected]>
Fixes: 9786b65bc61a ("drm/ttm: fix mmap refcounting")
Cc: Gerd Hoffmann <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: Maarten Lankhorst <[email protected]>
Cc: Maxime Ripard <[email protected]>
Cc: Thomas Zimmermann <[email protected]>
Cc: David Airlie <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: [email protected]
Cc: <[email protected]> # v5.5+
Signed-off-by: Thomas Zimmermann <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20210930085932.1.I8043d61cc238e0168e2f4ca5f4783223434aa587@changeid
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/drm_prime.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/drivers/gpu/drm/drm_prime.c
+++ b/drivers/gpu/drm/drm_prime.c
@@ -719,11 +719,13 @@ int drm_gem_prime_mmap(struct drm_gem_ob
if (obj->funcs && obj->funcs->mmap) {
vma->vm_ops = obj->funcs->vm_ops;
+ drm_gem_object_get(obj);
ret = obj->funcs->mmap(obj, vma);
- if (ret)
+ if (ret) {
+ drm_gem_object_put(obj);
return ret;
+ }
vma->vm_private_data = obj;
- drm_gem_object_get(obj);
return 0;
}
From: Jeremy Cline <[email protected]>
commit abae9164a421bc4a41a3769f01ebcd1f9d955e0e upstream.
Rather than protecting the nouveau_drm clients list with the lock within
the "client" nouveau_cli, add a dedicated lock to serialize access to
the list. This is both clearer and necessary to avoid lockdep being
upset with us when we need to iterate through all the clients in the
list and potentially lock their mutex, which is the same class as the
lock protecting the entire list.
Cc: [email protected] # 5.4+
Signed-off-by: Jeremy Cline <[email protected]>
Reviewed-by: Lyude Paul <[email protected]>
Reviewed-by: Ben Skeggs <[email protected]>
Tested-by: Karol Herbst <[email protected]>
Signed-off-by: Karol Herbst <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Link: https://gitlab.freedesktop.org/drm/nouveau/-/merge_requests/14
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/nouveau/nouveau_drm.c | 10 ++++++----
drivers/gpu/drm/nouveau/nouveau_drv.h | 5 +++++
2 files changed, 11 insertions(+), 4 deletions(-)
--- a/drivers/gpu/drm/nouveau/nouveau_drm.c
+++ b/drivers/gpu/drm/nouveau/nouveau_drm.c
@@ -562,6 +562,7 @@ nouveau_drm_device_init(struct drm_devic
nvkm_dbgopt(nouveau_debug, "DRM");
INIT_LIST_HEAD(&drm->clients);
+ mutex_init(&drm->clients_lock);
spin_lock_init(&drm->tile.lock);
/* workaround an odd issue on nvc1 by disabling the device's
@@ -659,6 +660,7 @@ nouveau_drm_device_fini(struct drm_devic
nouveau_cli_fini(&drm->client);
nouveau_cli_fini(&drm->master);
nvif_parent_dtor(&drm->parent);
+ mutex_destroy(&drm->clients_lock);
kfree(drm);
}
@@ -1090,9 +1092,9 @@ nouveau_drm_open(struct drm_device *dev,
fpriv->driver_priv = cli;
- mutex_lock(&drm->client.mutex);
+ mutex_lock(&drm->clients_lock);
list_add(&cli->head, &drm->clients);
- mutex_unlock(&drm->client.mutex);
+ mutex_unlock(&drm->clients_lock);
done:
if (ret && cli) {
@@ -1118,9 +1120,9 @@ nouveau_drm_postclose(struct drm_device
nouveau_abi16_fini(cli->abi16);
mutex_unlock(&cli->mutex);
- mutex_lock(&drm->client.mutex);
+ mutex_lock(&drm->clients_lock);
list_del(&cli->head);
- mutex_unlock(&drm->client.mutex);
+ mutex_unlock(&drm->clients_lock);
nouveau_cli_fini(cli);
kfree(cli);
--- a/drivers/gpu/drm/nouveau/nouveau_drv.h
+++ b/drivers/gpu/drm/nouveau/nouveau_drv.h
@@ -139,6 +139,11 @@ struct nouveau_drm {
struct list_head clients;
+ /**
+ * @clients_lock: Protects access to the @clients list of &struct nouveau_cli.
+ */
+ struct mutex clients_lock;
+
u8 old_pm_cap;
struct {
From: Jeremy Cline <[email protected]>
commit f55aaf63bde0d0336c3823bb3713bd4a464abbcf upstream.
The postclose handler can run after the device has been removed (or the
driver has been unbound) since userspace clients are free to hold the
file open as long as they want. Because the device removal callback
frees the entire nouveau_drm structure, any reference to it in the
postclose handler will result in a use-after-free.
To reproduce this, one must simply open the device file, unbind the
driver (or physically remove the device), and then close the device
file. This was found and can be reproduced easily with the IGT
core_hotunplug tests.
To avoid this, all clients are cleaned up in the device finalization
rather than deferring it to the postclose handler, and the postclose
handler is protected by a critical section which ensures the
drm_dev_unplug() and the postclose handler won't race.
This is not an ideal fix, since as I understand the proposed plan for
the kernel<->userspace interface for hotplug support, destroying the
client before the file is closed will cause problems. However, I believe
to properly fix this issue, the lifetime of the nouveau_drm structure
needs to be extended to match the drm_device, and this proved to be a
rather invasive change. Thus, I've broken this out so the fix can be
easily backported.
This fixes with the two previous commits CVE-2020-27820 (Karol).
Cc: [email protected] # 5.4+
Signed-off-by: Jeremy Cline <[email protected]>
Reviewed-by: Lyude Paul <[email protected]>
Reviewed-by: Ben Skeggs <[email protected]>
Tested-by: Karol Herbst <[email protected]>
Signed-off-by: Karol Herbst <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Link: https://gitlab.freedesktop.org/drm/nouveau/-/merge_requests/14
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/nouveau/nouveau_drm.c | 30 ++++++++++++++++++++++++++++++
1 file changed, 30 insertions(+)
--- a/drivers/gpu/drm/nouveau/nouveau_drm.c
+++ b/drivers/gpu/drm/nouveau/nouveau_drm.c
@@ -633,6 +633,7 @@ fail_alloc:
static void
nouveau_drm_device_fini(struct drm_device *dev)
{
+ struct nouveau_cli *cli, *temp_cli;
struct nouveau_drm *drm = nouveau_drm(dev);
if (nouveau_pmops_runtime()) {
@@ -657,6 +658,24 @@ nouveau_drm_device_fini(struct drm_devic
nouveau_ttm_fini(drm);
nouveau_vga_fini(drm);
+ /*
+ * There may be existing clients from as-yet unclosed files. For now,
+ * clean them up here rather than deferring until the file is closed,
+ * but this likely not correct if we want to support hot-unplugging
+ * properly.
+ */
+ mutex_lock(&drm->clients_lock);
+ list_for_each_entry_safe(cli, temp_cli, &drm->clients, head) {
+ list_del(&cli->head);
+ mutex_lock(&cli->mutex);
+ if (cli->abi16)
+ nouveau_abi16_fini(cli->abi16);
+ mutex_unlock(&cli->mutex);
+ nouveau_cli_fini(cli);
+ kfree(cli);
+ }
+ mutex_unlock(&drm->clients_lock);
+
nouveau_cli_fini(&drm->client);
nouveau_cli_fini(&drm->master);
nvif_parent_dtor(&drm->parent);
@@ -1112,6 +1131,16 @@ nouveau_drm_postclose(struct drm_device
{
struct nouveau_cli *cli = nouveau_cli(fpriv);
struct nouveau_drm *drm = nouveau_drm(dev);
+ int dev_index;
+
+ /*
+ * The device is gone, and as it currently stands all clients are
+ * cleaned up in the removal codepath. In the future this may change
+ * so that we can support hot-unplugging, but for now we immediately
+ * return to avoid a double-free situation.
+ */
+ if (!drm_dev_enter(dev, &dev_index))
+ return;
pm_runtime_get_sync(dev->dev);
@@ -1128,6 +1157,7 @@ nouveau_drm_postclose(struct drm_device
kfree(cli);
pm_runtime_mark_last_busy(dev->dev);
pm_runtime_put_autosuspend(dev->dev);
+ drm_dev_exit(dev_index);
}
static const struct drm_ioctl_desc
From: Jeremy Cline <[email protected]>
commit aff2299e0d81b26304ccc6a1ec0170e437f38efc upstream.
Nouveau does not currently support hot-unplugging, but it still makes
sense to switch from drm_dev_unregister() to drm_dev_unplug().
drm_dev_unplug() calls drm_dev_unregister() after marking the device as
unplugged, but only after any device critical sections are finished.
Since nouveau isn't using drm_dev_enter() and drm_dev_exit(), there are
no critical sections so this is nearly functionally equivalent. However,
the DRM layer does check to see if the device is unplugged, and if it is
returns appropriate error codes.
In the future nouveau can add critical sections in order to truly
support hot-unplugging.
Cc: [email protected] # 5.4+
Signed-off-by: Jeremy Cline <[email protected]>
Reviewed-by: Lyude Paul <[email protected]>
Reviewed-by: Ben Skeggs <[email protected]>
Tested-by: Karol Herbst <[email protected]>
Signed-off-by: Karol Herbst <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Link: https://gitlab.freedesktop.org/drm/nouveau/-/merge_requests/14
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/nouveau/nouveau_drm.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/gpu/drm/nouveau/nouveau_drm.c
+++ b/drivers/gpu/drm/nouveau/nouveau_drm.c
@@ -798,7 +798,7 @@ nouveau_drm_device_remove(struct drm_dev
struct nvkm_client *client;
struct nvkm_device *device;
- drm_dev_unregister(dev);
+ drm_dev_unplug(dev);
client = nvxx_client(&drm->client.base);
device = nvkm_device_find(client->device);
From: Jan Kara <[email protected]>
commit a48fc69fe6588b48d878d69de223b91a386a7cb4 upstream.
udf_readdir() didn't validate the directory position it should start
reading from. Thus when user uses lseek(2) on directory file descriptor
it can trick udf_readdir() into reading from a position in the middle of
directory entry which then upsets directory parsing code resulting in
errors or even possible kernel crashes. Similarly when the directory is
modified between two readdir calls, the directory position need not be
valid anymore.
Add code to validate current offset in the directory. This is actually
rather expensive for UDF as we need to read from the beginning of the
directory and parse all directory entries. This is because in UDF a
directory is just a stream of data containing directory entries and
since file names are fully under user's control we cannot depend on
detecting magic numbers and checksums in the header of directory entry
as a malicious attacker could fake them. We skip this step if we detect
that nothing changed since the last readdir call.
Reported-by: Nathan Wilson <[email protected]>
CC: [email protected]
Signed-off-by: Jan Kara <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/udf/dir.c | 32 ++++++++++++++++++++++++++++++--
fs/udf/namei.c | 3 +++
fs/udf/super.c | 2 ++
3 files changed, 35 insertions(+), 2 deletions(-)
--- a/fs/udf/dir.c
+++ b/fs/udf/dir.c
@@ -31,6 +31,7 @@
#include <linux/mm.h>
#include <linux/slab.h>
#include <linux/bio.h>
+#include <linux/iversion.h>
#include "udf_i.h"
#include "udf_sb.h"
@@ -43,7 +44,7 @@ static int udf_readdir(struct file *file
struct fileIdentDesc *fi = NULL;
struct fileIdentDesc cfi;
udf_pblk_t block, iblock;
- loff_t nf_pos;
+ loff_t nf_pos, emit_pos = 0;
int flen;
unsigned char *fname = NULL, *copy_name = NULL;
unsigned char *nameptr;
@@ -57,6 +58,7 @@ static int udf_readdir(struct file *file
int i, num, ret = 0;
struct extent_position epos = { NULL, 0, {0, 0} };
struct super_block *sb = dir->i_sb;
+ bool pos_valid = false;
if (ctx->pos == 0) {
if (!dir_emit_dot(file, ctx))
@@ -67,6 +69,21 @@ static int udf_readdir(struct file *file
if (nf_pos >= size)
goto out;
+ /*
+ * Something changed since last readdir (either lseek was called or dir
+ * changed)? We need to verify the position correctly points at the
+ * beginning of some dir entry so that the directory parsing code does
+ * not get confused. Since UDF does not have any reliable way of
+ * identifying beginning of dir entry (names are under user control),
+ * we need to scan the directory from the beginning.
+ */
+ if (!inode_eq_iversion(dir, file->f_version)) {
+ emit_pos = nf_pos;
+ nf_pos = 0;
+ } else {
+ pos_valid = true;
+ }
+
fname = kmalloc(UDF_NAME_LEN, GFP_NOFS);
if (!fname) {
ret = -ENOMEM;
@@ -122,13 +139,21 @@ static int udf_readdir(struct file *file
while (nf_pos < size) {
struct kernel_lb_addr tloc;
+ loff_t cur_pos = nf_pos;
- ctx->pos = (nf_pos >> 2) + 1;
+ /* Update file position only if we got past the current one */
+ if (nf_pos >= emit_pos) {
+ ctx->pos = (nf_pos >> 2) + 1;
+ pos_valid = true;
+ }
fi = udf_fileident_read(dir, &nf_pos, &fibh, &cfi, &epos, &eloc,
&elen, &offset);
if (!fi)
goto out;
+ /* Still not at offset where user asked us to read from? */
+ if (cur_pos < emit_pos)
+ continue;
liu = le16_to_cpu(cfi.lengthOfImpUse);
lfi = cfi.lengthFileIdent;
@@ -186,8 +211,11 @@ static int udf_readdir(struct file *file
} /* end while */
ctx->pos = (nf_pos >> 2) + 1;
+ pos_valid = true;
out:
+ if (pos_valid)
+ file->f_version = inode_query_iversion(dir);
if (fibh.sbh != fibh.ebh)
brelse(fibh.ebh);
brelse(fibh.sbh);
--- a/fs/udf/namei.c
+++ b/fs/udf/namei.c
@@ -30,6 +30,7 @@
#include <linux/sched.h>
#include <linux/crc-itu-t.h>
#include <linux/exportfs.h>
+#include <linux/iversion.h>
static inline int udf_match(int len1, const unsigned char *name1, int len2,
const unsigned char *name2)
@@ -134,6 +135,8 @@ int udf_write_fi(struct inode *inode, st
mark_buffer_dirty_inode(fibh->ebh, inode);
mark_buffer_dirty_inode(fibh->sbh, inode);
}
+ inode_inc_iversion(inode);
+
return 0;
}
--- a/fs/udf/super.c
+++ b/fs/udf/super.c
@@ -57,6 +57,7 @@
#include <linux/crc-itu-t.h>
#include <linux/log2.h>
#include <asm/byteorder.h>
+#include <linux/iversion.h>
#include "udf_sb.h"
#include "udf_i.h"
@@ -149,6 +150,7 @@ static struct inode *udf_alloc_inode(str
init_rwsem(&ei->i_data_sem);
ei->cached_extent.lstart = -1;
spin_lock_init(&ei->i_extent_cache_lock);
+ inode_set_iversion(&ei->vfs_inode, 1);
return &ei->vfs_inode;
}
From: hongao <[email protected]>
commit bf552083916a7f8800477b5986940d1c9a31b953 upstream.
amdgpu_connector_vga_get_modes missed function amdgpu_get_native_mode
which assign amdgpu_encoder->native_mode with *preferred_mode result in
amdgpu_encoder->native_mode.clock always be 0. That will cause
amdgpu_connector_set_property returned early on:
if ((rmx_type != DRM_MODE_SCALE_NONE) &&
(amdgpu_encoder->native_mode.clock == 0))
when we try to set scaling mode Full/Full aspect/Center.
Add the missing function to amdgpu_connector_vga_get_mode can fix this.
It also works on dvi connectors because
amdgpu_connector_dvi_helper_funcs.get_mode use the same method.
Signed-off-by: hongao <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c
@@ -827,6 +827,7 @@ static int amdgpu_connector_vga_get_mode
amdgpu_connector_get_edid(connector);
ret = amdgpu_connector_ddc_get_modes(connector);
+ amdgpu_get_native_mode(connector);
return ret;
}
From: Imre Deak <[email protected]>
commit 6c34bd4532a3f39952952ddc102737595729afc4 upstream.
Atm, there are no sink rate values set for DP (vs. eDP) sinks until the
DPCD capabilities are successfully read from the sink. During this time
intel_dp->num_common_rates is 0 which can lead to a
intel_dp->common_rates[-1] (*)
access, which is an undefined behaviour, in the following cases:
- In intel_dp_sync_state(), if the encoder is enabled without a sink
connected to the encoder's connector (BIOS enabled a monitor, but the
user unplugged the monitor until the driver loaded).
- In intel_dp_sync_state() if the encoder is enabled with a sink
connected, but for some reason the DPCD read has failed.
- In intel_dp_compute_link_config() if modesetting a connector without
a sink connected on it.
- In intel_dp_compute_link_config() if modesetting a connector with a
a sink connected on it, but before probing the connector first.
To avoid the (*) access in all the above cases, make sure that the sink
rate table - and hence the common rate table - is always valid, by
setting a default minimum sink rate when registering the connector
before anything could use it.
I also considered setting all the DP link rates by default, so that
modesetting with higher resolution modes also succeeds in the last two
cases above. However in case a sink is not connected that would stop
working after the first modeset, due to the LT fallback logic. So this
would need more work, beyond the scope of this fix.
As I mentioned in the previous patch, I don't think the issue this patch
fixes is user visible, however it is an undefined behaviour by
definition and triggers a BUG() in CONFIG_UBSAN builds, hence CC:stable.
v2: Clear the default sink rates, before initializing these for eDP.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/4297
Suggested-by: Ville Syrjälä <[email protected]>
Cc: Ville Syrjälä <[email protected]>
Cc: <[email protected]>
Signed-off-by: Imre Deak <[email protected]>
Reviewed-by: Ville Syrjälä <[email protected]>
Acked-by: Jani Nikula <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 3f61ef9777c0ab0f03f4af0ed6fd3e5250537a8d)
Signed-off-by: Rodrigo Vivi <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/i915/display/intel_dp.c | 11 +++++++++++
1 file changed, 11 insertions(+)
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -111,6 +111,12 @@ bool intel_dp_is_edp(struct intel_dp *in
static void intel_dp_unset_edid(struct intel_dp *intel_dp);
static int intel_dp_dsc_compute_bpp(struct intel_dp *intel_dp, u8 dsc_max_bpc);
+static void intel_dp_set_default_sink_rates(struct intel_dp *intel_dp)
+{
+ intel_dp->sink_rates[0] = 162000;
+ intel_dp->num_sink_rates = 1;
+}
+
/* update sink rates from dpcd */
static void intel_dp_set_sink_rates(struct intel_dp *intel_dp)
{
@@ -2462,6 +2468,9 @@ intel_edp_init_dpcd(struct intel_dp *int
*/
intel_psr_init_dpcd(intel_dp);
+ /* Clear the default sink rates */
+ intel_dp->num_sink_rates = 0;
+
/* Read the eDP 1.4+ supported link rates. */
if (intel_dp->edp_dpcd[0] >= DP_EDP_14) {
__le16 sink_rates[DP_MAX_SUPPORTED_RATES];
@@ -5296,6 +5305,8 @@ intel_dp_init_connector(struct intel_dig
return false;
intel_dp_set_source_rates(intel_dp);
+ intel_dp_set_default_sink_rates(intel_dp);
+ intel_dp_set_common_rates(intel_dp);
intel_dp->reset_link_params = true;
intel_dp->pps.pps_pipe = INVALID_PIPE;
From: Evan Quan <[email protected]>
commit 6ee27ee27ba8b2e725886951ba2d2d87f113bece upstream.
Just bail out if the target IP block is already in the desired
powergate/ungate state. This can avoid some duplicate settings
which sometimes may cause unexpected issues.
Link: https://lore.kernel.org/all/[email protected]/
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=214921
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=215025
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1789
Fixes: bf756fb833cb ("drm/amdgpu: add missing cleanups for Polaris12 UVD/VCE on suspend")
Signed-off-by: Evan Quan <[email protected]>
Tested-by: Borislav Petkov <[email protected]>
Reviewed-by: Lijo Lazar <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 3 +++
drivers/gpu/drm/amd/include/amd_shared.h | 3 ++-
drivers/gpu/drm/amd/pm/amdgpu_dpm.c | 10 ++++++++++
drivers/gpu/drm/amd/pm/inc/amdgpu_dpm.h | 8 ++++++++
4 files changed, 23 insertions(+), 1 deletion(-)
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
@@ -3532,6 +3532,9 @@ int amdgpu_device_init(struct amdgpu_dev
adev->rmmio_size = pci_resource_len(adev->pdev, 2);
}
+ for (i = 0; i < AMD_IP_BLOCK_TYPE_NUM; i++)
+ atomic_set(&adev->pm.pwr_state[i], POWER_STATE_UNKNOWN);
+
adev->rmmio = ioremap(adev->rmmio_base, adev->rmmio_size);
if (adev->rmmio == NULL) {
return -ENOMEM;
--- a/drivers/gpu/drm/amd/include/amd_shared.h
+++ b/drivers/gpu/drm/amd/include/amd_shared.h
@@ -98,7 +98,8 @@ enum amd_ip_block_type {
AMD_IP_BLOCK_TYPE_ACP,
AMD_IP_BLOCK_TYPE_VCN,
AMD_IP_BLOCK_TYPE_MES,
- AMD_IP_BLOCK_TYPE_JPEG
+ AMD_IP_BLOCK_TYPE_JPEG,
+ AMD_IP_BLOCK_TYPE_NUM,
};
enum amd_clockgating_state {
--- a/drivers/gpu/drm/amd/pm/amdgpu_dpm.c
+++ b/drivers/gpu/drm/amd/pm/amdgpu_dpm.c
@@ -927,6 +927,13 @@ int amdgpu_dpm_set_powergating_by_smu(st
{
int ret = 0;
const struct amd_pm_funcs *pp_funcs = adev->powerplay.pp_funcs;
+ enum ip_power_state pwr_state = gate ? POWER_STATE_OFF : POWER_STATE_ON;
+
+ if (atomic_read(&adev->pm.pwr_state[block_type]) == pwr_state) {
+ dev_dbg(adev->dev, "IP block%d already in the target %s state!",
+ block_type, gate ? "gate" : "ungate");
+ return 0;
+ }
switch (block_type) {
case AMD_IP_BLOCK_TYPE_UVD:
@@ -979,6 +986,9 @@ int amdgpu_dpm_set_powergating_by_smu(st
break;
}
+ if (!ret)
+ atomic_set(&adev->pm.pwr_state[block_type], pwr_state);
+
return ret;
}
--- a/drivers/gpu/drm/amd/pm/inc/amdgpu_dpm.h
+++ b/drivers/gpu/drm/amd/pm/inc/amdgpu_dpm.h
@@ -417,6 +417,12 @@ struct amdgpu_dpm {
enum amd_dpm_forced_level forced_level;
};
+enum ip_power_state {
+ POWER_STATE_UNKNOWN,
+ POWER_STATE_ON,
+ POWER_STATE_OFF,
+};
+
struct amdgpu_pm {
struct mutex mutex;
u32 current_sclk;
@@ -452,6 +458,8 @@ struct amdgpu_pm {
struct i2c_adapter smu_i2c;
struct mutex smu_i2c_mutex;
struct list_head pm_attr_list;
+
+ atomic_t pwr_state[AMD_IP_BLOCK_TYPE_NUM];
};
#define R600_SSTU_DFLT 0
From: Eric W. Biederman <[email protected]>
commit 26d5badbccddcc063dc5174a2baffd13a23322aa upstream.
Add a simple helper force_fatal_sig that causes a signal to be
delivered to a process as if the signal handler was set to SIG_DFL.
Reimplement force_sigsegv based upon this new helper. This fixes
force_sigsegv so that when it forces the default signal handler
to be used the code now forces the signal to be unblocked as well.
Reusing the tested logic in force_sig_info_to_task that was built for
force_sig_seccomp this makes the implementation trivial.
This is interesting both because it makes force_sigsegv simpler and
because there are a couple of buggy places in the kernel that call
do_exit(SIGILL) or do_exit(SIGSYS) because there is no straight
forward way today for those places to simply force the exit of a
process with the chosen signal. Creating force_fatal_sig allows
those places to be implemented with normal signal exits.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Eric W. Biederman <[email protected]>
Cc: Thomas Backlund <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/linux/sched/signal.h | 1 +
kernel/signal.c | 26 +++++++++++++++++---------
2 files changed, 18 insertions(+), 9 deletions(-)
--- a/include/linux/sched/signal.h
+++ b/include/linux/sched/signal.h
@@ -338,6 +338,7 @@ extern int kill_pid(struct pid *pid, int
extern __must_check bool do_notify_parent(struct task_struct *, int);
extern void __wake_up_parent(struct task_struct *p, struct task_struct *parent);
extern void force_sig(int);
+extern void force_fatal_sig(int);
extern int send_sig(int, struct task_struct *, int);
extern int zap_other_threads(struct task_struct *p);
extern struct sigqueue *sigqueue_alloc(void);
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -1650,6 +1650,19 @@ void force_sig(int sig)
}
EXPORT_SYMBOL(force_sig);
+void force_fatal_sig(int sig)
+{
+ struct kernel_siginfo info;
+
+ clear_siginfo(&info);
+ info.si_signo = sig;
+ info.si_errno = 0;
+ info.si_code = SI_KERNEL;
+ info.si_pid = 0;
+ info.si_uid = 0;
+ force_sig_info_to_task(&info, current, true);
+}
+
/*
* When things go south during signal handling, we
* will force a SIGSEGV. And if the signal that caused
@@ -1658,15 +1671,10 @@ EXPORT_SYMBOL(force_sig);
*/
void force_sigsegv(int sig)
{
- struct task_struct *p = current;
-
- if (sig == SIGSEGV) {
- unsigned long flags;
- spin_lock_irqsave(&p->sighand->siglock, flags);
- p->sighand->action[sig - 1].sa.sa_handler = SIG_DFL;
- spin_unlock_irqrestore(&p->sighand->siglock, flags);
- }
- force_sig(SIGSEGV);
+ if (sig == SIGSEGV)
+ force_fatal_sig(SIGSEGV);
+ else
+ force_sig(SIGSEGV);
}
int force_sig_fault_to_task(int sig, int code, void __user *addr
From: Eric W. Biederman <[email protected]>
commit 941edc5bf174b67f94db19817cbeab0a93e0c32a upstream.
Use force_fatal_sig instead of calling do_exit directly. This ensures
the ordinary signal handling path gets invoked, core dumps as
appropriate get created, and for multi-threaded processes all of the
threads are terminated not just a single thread.
When asked Gabriel Krisman Bertazi <[email protected]> said [1]:
> [email protected] (Eric W. Biederman) asked:
>
> > Why does do_syscal_user_dispatch call do_exit(SIGSEGV) and
> > do_exit(SIGSYS) instead of force_sig(SIGSEGV) and force_sig(SIGSYS)?
> >
> > Looking at the code these cases are not expected to happen, so I would
> > be surprised if userspace depends on any particular behaviour on the
> > failure path so I think we can change this.
>
> Hi Eric,
>
> There is not really a good reason, and the use case that originated the
> feature doesn't rely on it.
>
> Unless I'm missing yet another problem and others correct me, I think
> it makes sense to change it as you described.
>
> > Is using do_exit in this way something you copied from seccomp?
>
> I'm not sure, its been a while, but I think it might be just that. The
> first prototype of SUD was implemented as a seccomp mode.
If at some point it becomes interesting we could relax
"force_fatal_sig(SIGSEGV)" to instead say
"force_sig_fault(SIGSEGV, SEGV_MAPERR, sd->selector)".
I avoid doing that in this patch to avoid making it possible
to catch currently uncatchable signals.
Cc: Gabriel Krisman Bertazi <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Andy Lutomirski <[email protected]>
[1] https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Eric W. Biederman <[email protected]>
Cc: Thomas Backlund <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/entry/syscall_user_dispatch.c | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)
--- a/kernel/entry/syscall_user_dispatch.c
+++ b/kernel/entry/syscall_user_dispatch.c
@@ -47,14 +47,18 @@ bool syscall_user_dispatch(struct pt_reg
* access_ok() is performed once, at prctl time, when
* the selector is loaded by userspace.
*/
- if (unlikely(__get_user(state, sd->selector)))
- do_exit(SIGSEGV);
+ if (unlikely(__get_user(state, sd->selector))) {
+ force_fatal_sig(SIGSEGV);
+ return true;
+ }
if (likely(state == SYSCALL_DISPATCH_FILTER_ALLOW))
return false;
- if (state != SYSCALL_DISPATCH_FILTER_BLOCK)
- do_exit(SIGSYS);
+ if (state != SYSCALL_DISPATCH_FILTER_BLOCK) {
+ force_fatal_sig(SIGSYS);
+ return true;
+ }
}
sd->on_dispatch = true;
From: Eric W. Biederman <[email protected]>
commit 83a1f27ad773b1d8f0460d3a676114c7651918cc upstream.
If the register state may be partial and corrupted instead of calling
do_exit, call force_sigsegv(SIGSEGV). Which properly kills the
process with SIGSEGV and does not let any more userspace code execute,
instead of just killing one thread of the process and potentially
confusing everything.
Cc: Michael Ellerman <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: [email protected]
History-tree: git://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git
Fixes: 756f1ae8a44e ("PPC32: Rework signal code and add a swapcontext system call.")
Fixes: 04879b04bf50 ("[PATCH] ppc64: VMX (Altivec) support & signal32 rework, from Ben Herrenschmidt")
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Eric W. Biederman <[email protected]>
Cc: Thomas Backlund <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/powerpc/kernel/signal_32.c | 6 ++++--
arch/powerpc/kernel/signal_64.c | 9 ++++++---
2 files changed, 10 insertions(+), 5 deletions(-)
--- a/arch/powerpc/kernel/signal_32.c
+++ b/arch/powerpc/kernel/signal_32.c
@@ -1062,8 +1062,10 @@ SYSCALL_DEFINE3(swapcontext, struct ucon
* or if another thread unmaps the region containing the context.
* We kill the task with a SIGSEGV in this situation.
*/
- if (do_setcontext(new_ctx, regs, 0))
- do_exit(SIGSEGV);
+ if (do_setcontext(new_ctx, regs, 0)) {
+ force_sigsegv(SIGSEGV);
+ return -EFAULT;
+ }
set_thread_flag(TIF_RESTOREALL);
return 0;
--- a/arch/powerpc/kernel/signal_64.c
+++ b/arch/powerpc/kernel/signal_64.c
@@ -703,15 +703,18 @@ SYSCALL_DEFINE3(swapcontext, struct ucon
* We kill the task with a SIGSEGV in this situation.
*/
- if (__get_user_sigset(&set, &new_ctx->uc_sigmask))
- do_exit(SIGSEGV);
+ if (__get_user_sigset(&set, &new_ctx->uc_sigmask)) {
+ force_sigsegv(SIGSEGV);
+ return -EFAULT;
+ }
set_current_blocked(&set);
if (!user_read_access_begin(new_ctx, ctx_size))
return -EFAULT;
if (__unsafe_restore_sigcontext(current, NULL, 0, &new_ctx->uc_mcontext)) {
user_read_access_end();
- do_exit(SIGSEGV);
+ force_sigsegv(SIGSEGV);
+ return -EFAULT;
}
user_read_access_end();
From: Eric W. Biederman <[email protected]>
commit 9bc508cf0791c8e5a37696de1a046d746fcbd9d8 upstream.
Reading the history it is unclear why default_trap_handler calls
do_exit. It is not even menthioned in the commit where the change
happened. My best guess is that because it is unknown why the
exception happened it was desired to guarantee the process never
returned to userspace.
Using do_exit(SIGSEGV) has the problem that it will only terminate one
thread of a process, leaving the process in an undefined state.
Use force_sigsegv(SIGSEGV) instead which effectively has the same
behavior except that is uses the ordinary signal mechanism and
terminates all threads of a process and is generally well defined.
Cc: Heiko Carstens <[email protected]>
Cc: Vasily Gorbik <[email protected]>
Cc: Christian Borntraeger <[email protected]>
Cc: [email protected]
Fixes: ca2ab03237ec ("[PATCH] s390: core changes")
History Tree: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git
Reviewed-by: Christian Borntraeger <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Eric W. Biederman <[email protected]>
Cc: Thomas Backlund <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/s390/kernel/traps.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/s390/kernel/traps.c
+++ b/arch/s390/kernel/traps.c
@@ -84,7 +84,7 @@ static void default_trap_handler(struct
{
if (user_mode(regs)) {
report_user_fault(regs, SIGSEGV, 0);
- do_exit(SIGSEGV);
+ force_sigsegv(SIGSEGV);
} else
die(regs, "Unknown program exception");
}
From: Boqun Feng <[email protected]>
commit 8a7eb2d476c6823cd44d8c25a6230a52417d7ef8 upstream.
Baihua reported an error when boot an ARM64 guest with PAGE_SIZE=64k and
BALLOON is enabled:
hv_vmbus: registering driver hv_balloon
hv_vmbus: probe failed for device 1eccfd72-4b41-45ef-b73a-4a6e44c12924 (-22)
The cause of this is that the ringbuffer size for hv_balloon is not
adjusted with VMBUS_RING_SIZE(), which makes the size not large enough
for ringbuffers on guest with PAGE_SIZE=64k. Therefore use
VMBUS_RING_SIZE() to calculate the ringbuffer size. Note that the old
size (20 * 1024) counts a 4k header in the total size, while
VMBUS_RING_SIZE() expects the parameter as the payload size, so use
16 * 1024.
Cc: <[email protected]> # 5.15.x
Reported-by: Baihua Lu <[email protected]>
Signed-off-by: Boqun Feng <[email protected]>
Tested-by: Vitaly Kuznetsov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Wei Liu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/hv/hv_balloon.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/hv/hv_balloon.c
+++ b/drivers/hv/hv_balloon.c
@@ -480,7 +480,7 @@ module_param(pressure_report_delay, uint
MODULE_PARM_DESC(pressure_report_delay, "Delay in secs in reporting pressure");
static atomic_t trans_id = ATOMIC_INIT(0);
-static int dm_ring_size = 20 * 1024;
+static int dm_ring_size = VMBUS_RING_SIZE(16 * 1024);
/*
* Driver specific state.
From: Meng Li <[email protected]>
commit 9119570039481d56350af1c636f040fb300b8cf3 upstream.
According to upstream commit 5ec55823438e("net: stmmac:
add clocks management for gmac driver"), it improve clocks
management for stmmac driver. So, it is necessary to implement
the runtime callback in dwmac-socfpga driver because it doesn't
use the common stmmac_pltfr_pm_ops instance. Otherwise, clocks
are not disabled when system enters suspend status.
Fixes: 5ec55823438e ("net: stmmac: add clocks management for gmac driver")
Cc: [email protected]
Signed-off-by: Meng Li <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c | 24 ++++++++++++++++++--
1 file changed, 22 insertions(+), 2 deletions(-)
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
@@ -485,8 +485,28 @@ static int socfpga_dwmac_resume(struct d
}
#endif /* CONFIG_PM_SLEEP */
-static SIMPLE_DEV_PM_OPS(socfpga_dwmac_pm_ops, stmmac_suspend,
- socfpga_dwmac_resume);
+static int __maybe_unused socfpga_dwmac_runtime_suspend(struct device *dev)
+{
+ struct net_device *ndev = dev_get_drvdata(dev);
+ struct stmmac_priv *priv = netdev_priv(ndev);
+
+ stmmac_bus_clks_config(priv, false);
+
+ return 0;
+}
+
+static int __maybe_unused socfpga_dwmac_runtime_resume(struct device *dev)
+{
+ struct net_device *ndev = dev_get_drvdata(dev);
+ struct stmmac_priv *priv = netdev_priv(ndev);
+
+ return stmmac_bus_clks_config(priv, true);
+}
+
+static const struct dev_pm_ops socfpga_dwmac_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(stmmac_suspend, socfpga_dwmac_resume)
+ SET_RUNTIME_PM_OPS(socfpga_dwmac_runtime_suspend, socfpga_dwmac_runtime_resume, NULL)
+};
static const struct socfpga_dwmac_ops socfpga_gen5_ops = {
.set_phy_mode = socfpga_gen5_set_phy_mode,
From: Nikolay Borisov <[email protected]>
commit 45da9c1767ac31857df572f0a909fbe88fd5a7e9 upstream.
Ordered work functions aren't guaranteed to be handled by the same thread
which executed the normal work functions. The only way execution between
normal/ordered functions is synchronized is via the WORK_DONE_BIT,
unfortunately the used bitops don't guarantee any ordering whatsoever.
This manifested as seemingly inexplicable crashes on ARM64, where
async_chunk::inode is seen as non-null in async_cow_submit which causes
submit_compressed_extents to be called and crash occurs because
async_chunk::inode suddenly became NULL. The call trace was similar to:
pc : submit_compressed_extents+0x38/0x3d0
lr : async_cow_submit+0x50/0xd0
sp : ffff800015d4bc20
<registers omitted for brevity>
Call trace:
submit_compressed_extents+0x38/0x3d0
async_cow_submit+0x50/0xd0
run_ordered_work+0xc8/0x280
btrfs_work_helper+0x98/0x250
process_one_work+0x1f0/0x4ac
worker_thread+0x188/0x504
kthread+0x110/0x114
ret_from_fork+0x10/0x18
Fix this by adding respective barrier calls which ensure that all
accesses preceding setting of WORK_DONE_BIT are strictly ordered before
setting the flag. At the same time add a read barrier after reading of
WORK_DONE_BIT in run_ordered_work which ensures all subsequent loads
would be strictly ordered after reading the bit. This in turn ensures
are all accesses before WORK_DONE_BIT are going to be strictly ordered
before any access that can occur in ordered_func.
Reported-by: Chris Murphy <[email protected]>
Fixes: 08a9ff326418 ("btrfs: Added btrfs_workqueue_struct implemented ordered execution based on kernel workqueue")
CC: [email protected] # 4.4+
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2011928
Reviewed-by: Josef Bacik <[email protected]>
Tested-by: Chris Murphy <[email protected]>
Signed-off-by: Nikolay Borisov <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/btrfs/async-thread.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)
--- a/fs/btrfs/async-thread.c
+++ b/fs/btrfs/async-thread.c
@@ -234,6 +234,13 @@ static void run_ordered_work(struct __bt
ordered_list);
if (!test_bit(WORK_DONE_BIT, &work->flags))
break;
+ /*
+ * Orders all subsequent loads after reading WORK_DONE_BIT,
+ * paired with the smp_mb__before_atomic in btrfs_work_helper
+ * this guarantees that the ordered function will see all
+ * updates from ordinary work function.
+ */
+ smp_rmb();
/*
* we are going to call the ordered done function, but
@@ -317,6 +324,13 @@ static void btrfs_work_helper(struct wor
thresh_exec_hook(wq);
work->func(work);
if (need_order) {
+ /*
+ * Ensures all memory accesses done in the work function are
+ * ordered before setting the WORK_DONE_BIT. Ensuring the thread
+ * which is going to executed the ordered work sees them.
+ * Pairs with the smp_rmb in run_ordered_work.
+ */
+ smp_mb__before_atomic();
set_bit(WORK_DONE_BIT, &work->flags);
run_ordered_work(wq, work);
} else {
From: Ville Syrjälä <[email protected]>
commit 1977e8eb40ed53f0cac7db1a78295726f4ac0b24 upstream.
Looks like we never updated intel_bios_is_port_dp_dual_mode() when
the VBT port mapping became erratic on modern platforms. This
is causing us to look up the wrong child device and thus throwing
the heuristic off (ie. we might end looking at a child device for
a genuine DP++ port when we were supposed to look at one for a
native HDMI port).
Fix it up by not using the outdated port_mapping[] in
intel_bios_is_port_dp_dual_mode() and rely on
intel_bios_encoder_data_lookup() instead.
Cc: [email protected]
Tested-by: Randy Dunlap <[email protected]>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/4138
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Jani Nikula <[email protected]>
(cherry picked from commit 32c2bc89c7420fad2959ee23ef5b6be8b05d2bde)
Signed-off-by: Rodrigo Vivi <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/i915/display/intel_bios.c | 85 ++++++++++++++++++++++--------
1 file changed, 63 insertions(+), 22 deletions(-)
--- a/drivers/gpu/drm/i915/display/intel_bios.c
+++ b/drivers/gpu/drm/i915/display/intel_bios.c
@@ -1692,6 +1692,39 @@ static u8 map_ddc_pin(struct drm_i915_pr
return 0;
}
+static u8 dvo_port_type(u8 dvo_port)
+{
+ switch (dvo_port) {
+ case DVO_PORT_HDMIA:
+ case DVO_PORT_HDMIB:
+ case DVO_PORT_HDMIC:
+ case DVO_PORT_HDMID:
+ case DVO_PORT_HDMIE:
+ case DVO_PORT_HDMIF:
+ case DVO_PORT_HDMIG:
+ case DVO_PORT_HDMIH:
+ case DVO_PORT_HDMII:
+ return DVO_PORT_HDMIA;
+ case DVO_PORT_DPA:
+ case DVO_PORT_DPB:
+ case DVO_PORT_DPC:
+ case DVO_PORT_DPD:
+ case DVO_PORT_DPE:
+ case DVO_PORT_DPF:
+ case DVO_PORT_DPG:
+ case DVO_PORT_DPH:
+ case DVO_PORT_DPI:
+ return DVO_PORT_DPA;
+ case DVO_PORT_MIPIA:
+ case DVO_PORT_MIPIB:
+ case DVO_PORT_MIPIC:
+ case DVO_PORT_MIPID:
+ return DVO_PORT_MIPIA;
+ default:
+ return dvo_port;
+ }
+}
+
static enum port __dvo_port_to_port(int n_ports, int n_dvo,
const int port_mapping[][3], u8 dvo_port)
{
@@ -2622,35 +2655,17 @@ bool intel_bios_is_port_edp(struct drm_i
return false;
}
-static bool child_dev_is_dp_dual_mode(const struct child_device_config *child,
- enum port port)
+static bool child_dev_is_dp_dual_mode(const struct child_device_config *child)
{
- static const struct {
- u16 dp, hdmi;
- } port_mapping[] = {
- /*
- * Buggy VBTs may declare DP ports as having
- * HDMI type dvo_port :( So let's check both.
- */
- [PORT_B] = { DVO_PORT_DPB, DVO_PORT_HDMIB, },
- [PORT_C] = { DVO_PORT_DPC, DVO_PORT_HDMIC, },
- [PORT_D] = { DVO_PORT_DPD, DVO_PORT_HDMID, },
- [PORT_E] = { DVO_PORT_DPE, DVO_PORT_HDMIE, },
- [PORT_F] = { DVO_PORT_DPF, DVO_PORT_HDMIF, },
- };
-
- if (port == PORT_A || port >= ARRAY_SIZE(port_mapping))
- return false;
-
if ((child->device_type & DEVICE_TYPE_DP_DUAL_MODE_BITS) !=
(DEVICE_TYPE_DP_DUAL_MODE & DEVICE_TYPE_DP_DUAL_MODE_BITS))
return false;
- if (child->dvo_port == port_mapping[port].dp)
+ if (dvo_port_type(child->dvo_port) == DVO_PORT_DPA)
return true;
/* Only accept a HDMI dvo_port as DP++ if it has an AUX channel */
- if (child->dvo_port == port_mapping[port].hdmi &&
+ if (dvo_port_type(child->dvo_port) == DVO_PORT_HDMIA &&
child->aux_channel != 0)
return true;
@@ -2660,10 +2675,36 @@ static bool child_dev_is_dp_dual_mode(co
bool intel_bios_is_port_dp_dual_mode(struct drm_i915_private *i915,
enum port port)
{
+ static const struct {
+ u16 dp, hdmi;
+ } port_mapping[] = {
+ /*
+ * Buggy VBTs may declare DP ports as having
+ * HDMI type dvo_port :( So let's check both.
+ */
+ [PORT_B] = { DVO_PORT_DPB, DVO_PORT_HDMIB, },
+ [PORT_C] = { DVO_PORT_DPC, DVO_PORT_HDMIC, },
+ [PORT_D] = { DVO_PORT_DPD, DVO_PORT_HDMID, },
+ [PORT_E] = { DVO_PORT_DPE, DVO_PORT_HDMIE, },
+ [PORT_F] = { DVO_PORT_DPF, DVO_PORT_HDMIF, },
+ };
const struct intel_bios_encoder_data *devdata;
+ if (HAS_DDI(i915)) {
+ const struct intel_bios_encoder_data *devdata;
+
+ devdata = intel_bios_encoder_data_lookup(i915, port);
+
+ return devdata && child_dev_is_dp_dual_mode(&devdata->child);
+ }
+
+ if (port == PORT_A || port >= ARRAY_SIZE(port_mapping))
+ return false;
+
list_for_each_entry(devdata, &i915->vbt.display_devices, node) {
- if (child_dev_is_dp_dual_mode(&devdata->child, port))
+ if ((devdata->child.dvo_port == port_mapping[port].dp ||
+ devdata->child.dvo_port == port_mapping[port].hdmi) &&
+ child_dev_is_dp_dual_mode(&devdata->child))
return true;
}
From: Imre Deak <[email protected]>
commit cc99bc62ff6902688ee7bd3a7b25eefc620fbb6a upstream.
Atm until the DPCD for a connector is read the max link rate and lane
count params are invalid. If the connector is modeset, in
intel_dp_compute_config(), intel_dp_common_len_rate_limit(max_link_rate)
will return 0, leading to a intel_dp->common_rates[-1] access.
Fix the above by making sure the max link params are always valid.
The above access leads to an undefined behaviour by definition, though
not causing a user visible problem to my best knowledge, see the previous
patch why. Nevertheless it is an undefined behaviour and it triggers a
BUG() in CONFIG_UBSAN builds, hence CC:stable.
Cc: Ville Syrjälä <[email protected]>
Cc: <[email protected]>
Signed-off-by: Imre Deak <[email protected]>
Reviewed-by: Ville Syrjälä <[email protected]>
Acked-by: Jani Nikula <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 9ad87de4735620ffc555592e8c5f580478fa3ed0)
Signed-off-by: Rodrigo Vivi <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/i915/display/intel_dp.c | 18 ++++++++++--------
1 file changed, 10 insertions(+), 8 deletions(-)
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -1773,6 +1773,12 @@ void intel_dp_set_link_params(struct int
intel_dp->lane_count = lane_count;
}
+static void intel_dp_reset_max_link_params(struct intel_dp *intel_dp)
+{
+ intel_dp->max_link_lane_count = intel_dp_max_common_lane_count(intel_dp);
+ intel_dp->max_link_rate = intel_dp_max_common_rate(intel_dp);
+}
+
/* Enable backlight PWM and backlight PP control. */
void intel_edp_backlight_on(const struct intel_crtc_state *crtc_state,
const struct drm_connector_state *conn_state)
@@ -1932,8 +1938,7 @@ void intel_dp_sync_state(struct intel_en
if (intel_dp->dpcd[DP_DPCD_REV] == 0)
intel_dp_get_dpcd(intel_dp);
- intel_dp->max_link_lane_count = intel_dp_max_common_lane_count(intel_dp);
- intel_dp->max_link_rate = intel_dp_max_common_rate(intel_dp);
+ intel_dp_reset_max_link_params(intel_dp);
}
bool intel_dp_initial_fastset_check(struct intel_encoder *encoder,
@@ -2506,6 +2511,7 @@ intel_edp_init_dpcd(struct intel_dp *int
intel_dp_set_sink_rates(intel_dp);
intel_dp_set_common_rates(intel_dp);
+ intel_dp_reset_max_link_params(intel_dp);
/* Read the eDP DSC DPCD registers */
if (DISPLAY_VER(dev_priv) >= 10)
@@ -4249,12 +4255,7 @@ intel_dp_detect(struct drm_connector *co
* supports link training fallback params.
*/
if (intel_dp->reset_link_params || intel_dp->is_mst) {
- /* Initial max link lane count */
- intel_dp->max_link_lane_count = intel_dp_max_common_lane_count(intel_dp);
-
- /* Initial max link rate */
- intel_dp->max_link_rate = intel_dp_max_common_rate(intel_dp);
-
+ intel_dp_reset_max_link_params(intel_dp);
intel_dp->reset_link_params = false;
}
@@ -5307,6 +5308,7 @@ intel_dp_init_connector(struct intel_dig
intel_dp_set_source_rates(intel_dp);
intel_dp_set_default_sink_rates(intel_dp);
intel_dp_set_common_rates(intel_dp);
+ intel_dp_reset_max_link_params(intel_dp);
intel_dp->reset_link_params = true;
intel_dp->pps.pps_pipe = INVALID_PIPE;
From: Michael Walle <[email protected]>
commit 6c53b45c71b4920b5e62f0ea8079a1da382b9434 upstream.
Commit 6098475d4cb4 ("spi: Fix deadlock when adding SPI controllers on
SPI buses") introduced a per-controller mutex. But mutex_unlock() of
said lock is called after the controller is already freed:
spi_unregister_controller(ctlr)
-> put_device(&ctlr->dev)
-> spi_controller_release(dev)
-> mutex_unlock(&ctrl->add_lock)
Move the put_device() after the mutex_unlock().
Fixes: 6098475d4cb4 ("spi: Fix deadlock when adding SPI controllers on SPI buses")
Signed-off-by: Michael Walle <[email protected]>
Reviewed-by: Uwe Kleine-König <[email protected]>
Reviewed-by: Lukas Wunner <[email protected]>
Cc: [email protected] # v5.15
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/spi/spi.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -3020,12 +3020,6 @@ void spi_unregister_controller(struct sp
device_del(&ctlr->dev);
- /* Release the last reference on the controller if its driver
- * has not yet been converted to devm_spi_alloc_master/slave().
- */
- if (!ctlr->devm_allocated)
- put_device(&ctlr->dev);
-
/* free bus id */
mutex_lock(&board_lock);
if (found == ctlr)
@@ -3034,6 +3028,12 @@ void spi_unregister_controller(struct sp
if (IS_ENABLED(CONFIG_SPI_DYNAMIC))
mutex_unlock(&ctlr->add_lock);
+
+ /* Release the last reference on the controller if its driver
+ * has not yet been converted to devm_spi_alloc_master/slave().
+ */
+ if (!ctlr->devm_allocated)
+ put_device(&ctlr->dev);
}
EXPORT_SYMBOL_GPL(spi_unregister_controller);
From: Christian Brauner <[email protected]>
commit 968219708108440b23bc292e0486e3cc1d9a1bed upstream.
When calling setattr_prepare() to determine the validity of the attributes the
ia_{g,u}id fields contain the value that will be written to inode->i_{g,u}id.
When the {g,u}id attribute of the file isn't altered and the caller's fs{g,u}id
matches the current {g,u}id attribute the attribute change is allowed.
The value in ia_{g,u}id does already account for idmapped mounts and will have
taken the relevant idmapping into account. So in order to verify that the
{g,u}id attribute isn't changed we simple need to compare the ia_{g,u}id value
against the inode's i_{g,u}id value.
This only has any meaning for idmapped mounts as idmapping helpers are
idempotent without them. And for idmapped mounts this really only has a meaning
when circular idmappings are used, i.e. mappings where e.g. id 1000 is mapped
to id 1001 and id 1001 is mapped to id 1000. Such ciruclar mappings can e.g. be
useful when sharing the same home directory between multiple users at the same
time.
As an example consider a directory with two files: /source/file1 owned by
{g,u}id 1000 and /source/file2 owned by {g,u}id 1001. Assume we create an
idmapped mount at /target with an idmapping that maps files owned by {g,u}id
1000 to being owned by {g,u}id 1001 and files owned by {g,u}id 1001 to being
owned by {g,u}id 1000. In effect, the idmapped mount at /target switches the
ownership of /source/file1 and source/file2, i.e. /target/file1 will be owned
by {g,u}id 1001 and /target/file2 will be owned by {g,u}id 1000.
This means that a user with fs{g,u}id 1000 must be allowed to setattr
/target/file2 from {g,u}id 1000 to {g,u}id 1000. Similar, a user with fs{g,u}id
1001 must be allowed to setattr /target/file1 from {g,u}id 1001 to {g,u}id
1001. Conversely, a user with fs{g,u}id 1000 must fail to setattr /target/file1
from {g,u}id 1001 to {g,u}id 1000. And a user with fs{g,u}id 1001 must fail to
setattr /target/file2 from {g,u}id 1000 to {g,u}id 1000. Both cases must fail
with EPERM for non-capable callers.
Before this patch we could end up denying legitimate attribute changes and
allowing invalid attribute changes when circular mappings are used. To even get
into this situation the caller must've been privileged both to create that
mapping and to create that idmapped mount.
This hasn't been seen in the wild anywhere but came up when expanding the
testsuite during work on a series of hardening patches. All idmapped fstests
pass without any regressions and we add new tests to verify the behavior of
circular mappings.
Link: https://lore.kernel.org/r/[email protected]
Fixes: 2f221d6f7b88 ("attr: handle idmapped mounts")
Cc: Seth Forshee <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Al Viro <[email protected]>
Cc: [email protected]
CC: [email protected]
Reviewed-by: Christoph Hellwig <[email protected]>
Acked-by: Seth Forshee <[email protected]>
Signed-off-by: Christian Brauner <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/attr.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/fs/attr.c
+++ b/fs/attr.c
@@ -35,7 +35,7 @@ static bool chown_ok(struct user_namespa
kuid_t uid)
{
kuid_t kuid = i_uid_into_mnt(mnt_userns, inode);
- if (uid_eq(current_fsuid(), kuid) && uid_eq(uid, kuid))
+ if (uid_eq(current_fsuid(), kuid) && uid_eq(uid, inode->i_uid))
return true;
if (capable_wrt_inode_uidgid(mnt_userns, inode, CAP_CHOWN))
return true;
@@ -62,7 +62,7 @@ static bool chgrp_ok(struct user_namespa
{
kgid_t kgid = i_gid_into_mnt(mnt_userns, inode);
if (uid_eq(current_fsuid(), i_uid_into_mnt(mnt_userns, inode)) &&
- (in_group_p(gid) || gid_eq(gid, kgid)))
+ (in_group_p(gid) || gid_eq(gid, inode->i_gid)))
return true;
if (capable_wrt_inode_uidgid(mnt_userns, inode, CAP_CHOWN))
return true;
From: Thomas Gleixner <[email protected]>
commit 3751c3d34cd5a750c86d1c8eaf217d8faf7f9325 upstream.
The recent addition of timestamp correction to compensate the CDC error
introduced a subtle signed/unsigned bug in stmmac_get_tx_hwtstamp() while
it managed for some obscure reason to avoid that in stmmac_get_rx_hwtstamp().
The issue is:
s64 adjust = 0;
u64 ns;
adjust += -(2 * (NSEC_PER_SEC / priv->plat->clk_ptp_rate));
ns += adjust;
works by chance on 64bit, but falls apart on 32bit because the compiler
knows that adjust fits into 32bit and then treats the addition as a u64 +
u32 resulting in an off by ~2 seconds failure.
The RX variant uses an u64 for adjust and does the adjustment via
ns -= adjust;
because consistency is obviously overrated.
Get rid of the pointless zero initialized adjust variable and do:
ns -= (2 * NSEC_PER_SEC) / priv->plat->clk_ptp_rate;
which is obviously correct and spares the adjust obfuscation. Aside of that
it yields a more accurate result because the multiplication takes place
before the integer divide truncation and not afterwards.
Stick the calculation into an inline so it can't be accidentally
disimproved. Return an u32 from that inline as the result is guaranteed
to fit which lets the compiler optimize the substraction.
Cc: [email protected]
Fixes: 3600be5f58c1 ("net: stmmac: add timestamp correction to rid CDC sync error")
Reported-by: Benedikt Spranger <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Tested-by: Benedikt Spranger <[email protected]>
Tested-by: Kurt Kanzenbach <[email protected]> # Intel EHL
Link: https://lore.kernel.org/r/87mtm578cs.ffs@tglx
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 23 +++++++++-------------
1 file changed, 10 insertions(+), 13 deletions(-)
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -511,6 +511,14 @@ bool stmmac_eee_init(struct stmmac_priv
return true;
}
+static inline u32 stmmac_cdc_adjust(struct stmmac_priv *priv)
+{
+ /* Correct the clk domain crossing(CDC) error */
+ if (priv->plat->has_gmac4 && priv->plat->clk_ptp_rate)
+ return (2 * NSEC_PER_SEC) / priv->plat->clk_ptp_rate;
+ return 0;
+}
+
/* stmmac_get_tx_hwtstamp - get HW TX timestamps
* @priv: driver private structure
* @p : descriptor pointer
@@ -524,7 +532,6 @@ static void stmmac_get_tx_hwtstamp(struc
{
struct skb_shared_hwtstamps shhwtstamp;
bool found = false;
- s64 adjust = 0;
u64 ns = 0;
if (!priv->hwts_tx_en)
@@ -543,12 +550,7 @@ static void stmmac_get_tx_hwtstamp(struc
}
if (found) {
- /* Correct the clk domain crossing(CDC) error */
- if (priv->plat->has_gmac4 && priv->plat->clk_ptp_rate) {
- adjust += -(2 * (NSEC_PER_SEC /
- priv->plat->clk_ptp_rate));
- ns += adjust;
- }
+ ns -= stmmac_cdc_adjust(priv);
memset(&shhwtstamp, 0, sizeof(struct skb_shared_hwtstamps));
shhwtstamp.hwtstamp = ns_to_ktime(ns);
@@ -573,7 +575,6 @@ static void stmmac_get_rx_hwtstamp(struc
{
struct skb_shared_hwtstamps *shhwtstamp = NULL;
struct dma_desc *desc = p;
- u64 adjust = 0;
u64 ns = 0;
if (!priv->hwts_rx_en)
@@ -586,11 +587,7 @@ static void stmmac_get_rx_hwtstamp(struc
if (stmmac_get_rx_timestamp_status(priv, p, np, priv->adv_ts)) {
stmmac_get_timestamp(priv, desc, priv->adv_ts, &ns);
- /* Correct the clk domain crossing(CDC) error */
- if (priv->plat->has_gmac4 && priv->plat->clk_ptp_rate) {
- adjust += 2 * (NSEC_PER_SEC / priv->plat->clk_ptp_rate);
- ns -= adjust;
- }
+ ns -= stmmac_cdc_adjust(priv);
netdev_dbg(priv->dev, "get valid RX hw timestamp %llu\n", ns);
shhwtstamp = skb_hwtstamps(skb);
From: Maxim Levitsky <[email protected]>
commit af957eebfcc17433ee83ab85b1195a933ab5049c upstream.
When loading nested state, don't use check vcpu->arch.efer to get the
L1 host's 64-bit vs. 32-bit state and don't check it for consistency
with respect to VM_EXIT_HOST_ADDR_SPACE_SIZE, as register state in vCPU
may be stale when KVM_SET_NESTED_STATE is called---and architecturally
does not exist. When restoring L2 state in KVM, the CPU is placed in
non-root where nested VMX code has no snapshot of L1 host state: VMX
(conditionally) loads host state fields loaded on VM-exit, but they need
not correspond to the state before entry. A simple case occurs in KVM
itself, where the host RIP field points to vmx_vmexit rather than the
instruction following vmlaunch/vmresume.
However, for the particular case of L1 being in 32- or 64-bit mode
on entry, the exit controls can be treated instead as the source of
truth regarding the state of L1 on entry, and can be used to check
that vmcs12.VM_EXIT_HOST_ADDR_SPACE_SIZE matches vmcs12.HOST_EFER if
vmcs12.VM_EXIT_LOAD_IA32_EFER is set. The consistency check on CPU
EFER vs. vmcs12.VM_EXIT_HOST_ADDR_SPACE_SIZE, instead, happens only
on VM-Enter. That's because, again, there's conceptually no "current"
L1 EFER to check on KVM_SET_NESTED_STATE.
Suggested-by: Paolo Bonzini <[email protected]>
Signed-off-by: Maxim Levitsky <[email protected]>
Message-Id: <[email protected]>
Cc: [email protected]
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kvm/vmx/nested.c | 22 +++++++++++++++++-----
1 file changed, 17 insertions(+), 5 deletions(-)
--- a/arch/x86/kvm/vmx/nested.c
+++ b/arch/x86/kvm/vmx/nested.c
@@ -2854,6 +2854,17 @@ static int nested_vmx_check_controls(str
return 0;
}
+static int nested_vmx_check_address_space_size(struct kvm_vcpu *vcpu,
+ struct vmcs12 *vmcs12)
+{
+#ifdef CONFIG_X86_64
+ if (CC(!!(vmcs12->vm_exit_controls & VM_EXIT_HOST_ADDR_SPACE_SIZE) !=
+ !!(vcpu->arch.efer & EFER_LMA)))
+ return -EINVAL;
+#endif
+ return 0;
+}
+
static int nested_vmx_check_host_state(struct kvm_vcpu *vcpu,
struct vmcs12 *vmcs12)
{
@@ -2878,18 +2889,16 @@ static int nested_vmx_check_host_state(s
return -EINVAL;
#ifdef CONFIG_X86_64
- ia32e = !!(vcpu->arch.efer & EFER_LMA);
+ ia32e = !!(vmcs12->vm_exit_controls & VM_EXIT_HOST_ADDR_SPACE_SIZE);
#else
ia32e = false;
#endif
if (ia32e) {
- if (CC(!(vmcs12->vm_exit_controls & VM_EXIT_HOST_ADDR_SPACE_SIZE)) ||
- CC(!(vmcs12->host_cr4 & X86_CR4_PAE)))
+ if (CC(!(vmcs12->host_cr4 & X86_CR4_PAE)))
return -EINVAL;
} else {
- if (CC(vmcs12->vm_exit_controls & VM_EXIT_HOST_ADDR_SPACE_SIZE) ||
- CC(vmcs12->vm_entry_controls & VM_ENTRY_IA32E_MODE) ||
+ if (CC(vmcs12->vm_entry_controls & VM_ENTRY_IA32E_MODE) ||
CC(vmcs12->host_cr4 & X86_CR4_PCIDE) ||
CC((vmcs12->host_rip) >> 32))
return -EINVAL;
@@ -3559,6 +3568,9 @@ static int nested_vmx_run(struct kvm_vcp
if (nested_vmx_check_controls(vcpu, vmcs12))
return nested_vmx_fail(vcpu, VMXERR_ENTRY_INVALID_CONTROL_FIELD);
+ if (nested_vmx_check_address_space_size(vcpu, vmcs12))
+ return nested_vmx_fail(vcpu, VMXERR_ENTRY_INVALID_HOST_STATE_FIELD);
+
if (nested_vmx_check_host_state(vcpu, vmcs12))
return nested_vmx_fail(vcpu, VMXERR_ENTRY_INVALID_HOST_STATE_FIELD);
From: Ondrej Mosnacek <[email protected]>
commit dc27f3c5d10c58069672215787a96b4fae01818b upstream.
When the hash table slot array allocation fails in hashtab_init(),
h->size is left initialized with a non-zero value, but the h->htable
pointer is NULL. This may then cause a NULL pointer dereference, since
the policydb code relies on the assumption that even after a failed
hashtab_init(), hashtab_map() and hashtab_destroy() can be safely called
on it. Yet, these detect an empty hashtab only by looking at the size.
Fix this by making sure that hashtab_init() always leaves behind a valid
empty hashtab when the allocation fails.
Cc: [email protected]
Fixes: 03414a49ad5f ("selinux: do not allocate hashtabs dynamically")
Signed-off-by: Ondrej Mosnacek <[email protected]>
Signed-off-by: Paul Moore <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
security/selinux/ss/hashtab.c | 17 ++++++++++++-----
1 file changed, 12 insertions(+), 5 deletions(-)
--- a/security/selinux/ss/hashtab.c
+++ b/security/selinux/ss/hashtab.c
@@ -30,13 +30,20 @@ static u32 hashtab_compute_size(u32 nel)
int hashtab_init(struct hashtab *h, u32 nel_hint)
{
- h->size = hashtab_compute_size(nel_hint);
+ u32 size = hashtab_compute_size(nel_hint);
+
+ /* should already be zeroed, but better be safe */
h->nel = 0;
- if (!h->size)
- return 0;
+ h->size = 0;
+ h->htable = NULL;
- h->htable = kcalloc(h->size, sizeof(*h->htable), GFP_KERNEL);
- return h->htable ? 0 : -ENOMEM;
+ if (size) {
+ h->htable = kcalloc(size, sizeof(*h->htable), GFP_KERNEL);
+ if (!h->htable)
+ return -ENOMEM;
+ h->size = size;
+ }
+ return 0;
}
int __hashtab_insert(struct hashtab *h, struct hashtab_node **dst,
From: Josef Bacik <[email protected]>
commit 54fde91f52f515e0b1514f0f0fa146e87a672227 upstream.
Christoph pointed out that I'm updating bdev->bd_inode for the device
time when we remove block devices from a btrfs file system, however this
isn't actually exposed to anything. The inode we want to update is the
one that's associated with the path to the device, usually on devtmpfs,
so that blkid notices the difference.
We still don't want to do the blkdev_open, so use kern_path() to get the
path to the given device and do the update time on that inode.
Fixes: 8f96a5bfa150 ("btrfs: update the bdev time directly when closing")
Reported-by: Christoph Hellwig <[email protected]>
Signed-off-by: Josef Bacik <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/btrfs/volumes.c | 21 +++++++++++++--------
1 file changed, 13 insertions(+), 8 deletions(-)
--- a/fs/btrfs/volumes.c
+++ b/fs/btrfs/volumes.c
@@ -14,6 +14,7 @@
#include <linux/semaphore.h>
#include <linux/uuid.h>
#include <linux/list_sort.h>
+#include <linux/namei.h>
#include "misc.h"
#include "ctree.h"
#include "extent_map.h"
@@ -1884,18 +1885,22 @@ out:
/*
* Function to update ctime/mtime for a given device path.
* Mainly used for ctime/mtime based probe like libblkid.
+ *
+ * We don't care about errors here, this is just to be kind to userspace.
*/
-static void update_dev_time(struct block_device *bdev)
+static void update_dev_time(const char *device_path)
{
- struct inode *inode = bdev->bd_inode;
+ struct path path;
struct timespec64 now;
+ int ret;
- /* Shouldn't happen but just in case. */
- if (!inode)
+ ret = kern_path(device_path, LOOKUP_FOLLOW, &path);
+ if (ret)
return;
- now = current_time(inode);
- generic_update_time(inode, &now, S_MTIME | S_CTIME);
+ now = current_time(d_inode(path.dentry));
+ inode_update_time(d_inode(path.dentry), &now, S_MTIME | S_CTIME);
+ path_put(&path);
}
static int btrfs_rm_dev_item(struct btrfs_device *device)
@@ -2071,7 +2076,7 @@ void btrfs_scratch_superblocks(struct bt
btrfs_kobject_uevent(bdev, KOBJ_CHANGE);
/* Update ctime/mtime for device path for libblkid */
- update_dev_time(bdev);
+ update_dev_time(device_path);
}
int btrfs_rm_device(struct btrfs_fs_info *fs_info, const char *device_path,
@@ -2735,7 +2740,7 @@ int btrfs_init_new_device(struct btrfs_f
btrfs_forget_devices(device_path);
/* Update ctime/mtime for blkid or udev */
- update_dev_time(bdev);
+ update_dev_time(device_path);
return ret;
From: Kuninori Morimoto <[email protected]>
commit 2ce1b21cb3326e12af3c72c47e1d294b19d73947 upstream.
commit d5bb69dc54ec1 ("ASoC: sh: rcar: dma: : use proper DMAENGINE
API for termination") updated DMAEngine API _all() to _sync(),
but it should be _async().
_all() and _async() are almost same, the difference is only return
error code. _sync() will call dmaengine_synchronize() and will be
kernel panic.
This patch is needed for v5.15 or later.
[ 27.293264] BUG: scheduling while atomic: irq/130-ec70000/131/0x00000003
[ 27.300084] 2 locks held by irq/130-ec70000/131:
[ 27.304743] #0: ffff0004c274d908 (&group->lock){....}-{2:2}, at: _snd_pcm_stream_lock_irqsave+0x48/0x54
[ 27.314344] #1: ffff0004c1788c60 (&priv->lock#2){....}-{2:2}, at: rsnd_soc_dai_trigger+0x70/0x7bc
[ 27.323409] irq event stamp: 206
[ 27.326664] hardirqs last enabled at (205): [<ffff80001082de50>] _raw_spin_unlock_irq+0x50/0xa0
[ 27.335529] hardirqs last disabled at (206): [<ffff80001082d9e4>] _raw_spin_lock_irqsave+0xc4/0xd0
[ 27.344564] softirqs last enabled at (0): [<ffff800010037324>] copy_process+0x644/0x1b10
[ 27.352819] softirqs last disabled at (0): [<0000000000000000>] 0x0
[ 27.359142] CPU: 0 PID: 131 Comm: irq/130-ec70000 Not tainted 5.14.0-rc1+ #918
[ 27.366429] Hardware name: Renesas H3ULCB Kingfisher board based on r8a77950 (DT)
[ 27.373975] Call trace:
[ 27.376442] dump_backtrace+0x0/0x1b4
[ 27.380141] show_stack+0x24/0x30
[ 27.383488] dump_stack_lvl+0x8c/0xb8
[ 27.387184] dump_stack+0x18/0x34
[ 27.390528] __schedule_bug+0x8c/0x9c
[ 27.394224] __schedule+0x790/0x8dc
[ 27.397746] schedule+0x7c/0x110
[ 27.401003] synchronize_irq+0x94/0xd0
[ 27.404786] rcar_dmac_device_synchronize+0x20/0x2c
[ 27.409710] rsnd_dmaen_stop+0x50/0x64
[ 27.413495] rsnd_soc_dai_trigger+0x554/0x7bc
[ 27.417890] snd_soc_pcm_dai_trigger+0xe8/0x264
Cc: <[email protected]>
Fixes: commit d5bb69dc54ec1 ("ASoC: sh: rcar: dma: : use proper DMAENGINE API for termination")
Link: https://lore.kernel.org/r/TY2PR01MB3692889E1A7476C4322CC296D8AE9@TY2PR01MB3692.jpnprd01.prod.outlook.com
Reported-by: Yoshihiro Shimoda <[email protected]>
Acked-by: Wolfram Sang <[email protected]>
Signed-off-by: Kuninori Morimoto <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/soc/sh/rcar/dma.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/sound/soc/sh/rcar/dma.c
+++ b/sound/soc/sh/rcar/dma.c
@@ -102,7 +102,7 @@ static int rsnd_dmaen_stop(struct rsnd_m
struct rsnd_dmaen *dmaen = rsnd_dma_to_dmaen(dma);
if (dmaen->chan)
- dmaengine_terminate_sync(dmaen->chan);
+ dmaengine_terminate_async(dmaen->chan);
return 0;
}
From: Randy Dunlap <[email protected]>
commit ef775a0e36c6a81c5b07cb228c02f967133fe768 upstream.
When CONFIG_PROC_FS is not set, there is a build warning (turned
into an error):
../drivers/hwmon/dell-smm-hwmon.c: In function 'i8k_init_procfs':
../drivers/hwmon/dell-smm-hwmon.c:624:24: error: unused variable 'data' [-Werror=unused-variable]
struct dell_smm_data *data = dev_get_drvdata(dev);
Make I8K depend on PROC_FS and HWMON (instead of selecting HWMON -- it
is strongly preferred to not select entire subsystems).
Build tested in all possible combinations of SENSORS_DELL_SMM, I8K, and
PROC_FS.
Fixes: 039ae58503f3 ("hwmon: Allow to compile dell-smm-hwmon driver without /proc/i8k")
Reported-by: Arnd Bergmann <[email protected]>
Signed-off-by: Randy Dunlap <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Reviewed-by: Arnd Bergmann <[email protected]>
Acked-by: Guenter Roeck <[email protected]>
Acked-by: Pali Rohár <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/Kconfig | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -1256,7 +1256,8 @@ config TOSHIBA
config I8K
tristate "Dell i8k legacy laptop support"
- select HWMON
+ depends on HWMON
+ depends on PROC_FS
select SENSORS_DELL_SMM
help
This option enables legacy /proc/i8k userspace interface in hwmon
From: Eric Dumazet <[email protected]>
commit c4777efa751d293e369aec464ce6875e957be255 upstream.
While commit 097b9146c0e2 ("net: fix up truesize of cloned
skb in skb_prepare_for_shift()") fixed immediate issues found
when KFENCE was enabled/tested, there are still similar issues,
when tcp_trim_head() hits KFENCE while the master skb
is cloned.
This happens under heavy networking TX workloads,
when the TX completion might be delayed after incoming ACK.
This patch fixes the WARNING in sk_stream_kill_queues
when sk->sk_mem_queued/sk->sk_forward_alloc are not zero.
Fixes: d3fb45f370d9 ("mm, kfence: insert KFENCE hooks for SLAB")
Signed-off-by: Eric Dumazet <[email protected]>
Acked-by: Marco Elver <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/linux/skbuff.h | 16 ++++++++++++++++
net/core/skbuff.c | 14 +-------------
net/ipv4/tcp_output.c | 6 +++---
3 files changed, 20 insertions(+), 16 deletions(-)
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -1671,6 +1671,22 @@ static inline int skb_unclone(struct sk_
return 0;
}
+/* This variant of skb_unclone() makes sure skb->truesize is not changed */
+static inline int skb_unclone_keeptruesize(struct sk_buff *skb, gfp_t pri)
+{
+ might_sleep_if(gfpflags_allow_blocking(pri));
+
+ if (skb_cloned(skb)) {
+ unsigned int save = skb->truesize;
+ int res;
+
+ res = pskb_expand_head(skb, 0, 0, pri);
+ skb->truesize = save;
+ return res;
+ }
+ return 0;
+}
+
/**
* skb_header_cloned - is the header a clone
* @skb: buffer to check
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -3449,19 +3449,7 @@ EXPORT_SYMBOL(skb_split);
*/
static int skb_prepare_for_shift(struct sk_buff *skb)
{
- int ret = 0;
-
- if (skb_cloned(skb)) {
- /* Save and restore truesize: pskb_expand_head() may reallocate
- * memory where ksize(kmalloc(S)) != ksize(kmalloc(S)), but we
- * cannot change truesize at this point.
- */
- unsigned int save_truesize = skb->truesize;
-
- ret = pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
- skb->truesize = save_truesize;
- }
- return ret;
+ return skb_unclone_keeptruesize(skb, GFP_ATOMIC);
}
/**
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -1562,7 +1562,7 @@ int tcp_fragment(struct sock *sk, enum t
return -ENOMEM;
}
- if (skb_unclone(skb, gfp))
+ if (skb_unclone_keeptruesize(skb, gfp))
return -ENOMEM;
/* Get a new skb... force flag on. */
@@ -1672,7 +1672,7 @@ int tcp_trim_head(struct sock *sk, struc
{
u32 delta_truesize;
- if (skb_unclone(skb, GFP_ATOMIC))
+ if (skb_unclone_keeptruesize(skb, GFP_ATOMIC))
return -ENOMEM;
delta_truesize = __pskb_trim_head(skb, len);
@@ -3184,7 +3184,7 @@ int __tcp_retransmit_skb(struct sock *sk
cur_mss, GFP_ATOMIC))
return -ENOMEM; /* We'll try again later. */
} else {
- if (skb_unclone(skb, GFP_ATOMIC))
+ if (skb_unclone_keeptruesize(skb, GFP_ATOMIC))
return -ENOMEM;
diff = tcp_skb_pcount(skb);
From: Eric W. Biederman <[email protected]>
commit 1fbd60df8a852d9c55de8cd3621899cf4c72a5b7 upstream.
Update save_v86_state to always complete all of it's work except
possibly some of the copies to userspace even if save_v86_state takes
a fault. This ensures that the kernel is always in a sane state, even
if userspace has done something silly.
When save_v86_state takes a fault update it to force userspace to take
a SIGSEGV and terminate the userspace application.
As Andy pointed out in review of the first version of this change
there are races between sigaction and the application terinating. Now
that the code has been modified to always perform all save_v86_state's
work (except possibly copying to userspace) those races do not matter
from a kernel perspective.
Forcing the userspace application to terminate (by resetting it's
handler to SIGDFL) is there to keep everything as close to the current
behavior as possible while removing the unique (and difficult to
maintain) use of do_exit.
If this new SIGSEGV happens during handle_signal the next time around
the exit_to_user_mode_loop, SIGSEGV will be delivered to userspace.
All of the callers of handle_vm86_trap and handle_vm86_fault run the
exit_to_user_mode_loop before they return to userspace any signal sent
to the current task during their execution will be delivered to the
current task before that tasks exits to usermode.
Cc: Andy Lutomirski <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: [email protected]
Cc: H Peter Anvin <[email protected]>
v1: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/877de1xcr6.fsf_-_@disp2133
Signed-off-by: Eric W. Biederman <[email protected]>
Cc: Thomas Backlund <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kernel/vm86_32.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/arch/x86/kernel/vm86_32.c
+++ b/arch/x86/kernel/vm86_32.c
@@ -142,6 +142,7 @@ void save_v86_state(struct kernel_vm86_r
user_access_end();
+exit_vm86:
preempt_disable();
tsk->thread.sp0 = vm86->saved_sp0;
tsk->thread.sysenter_cs = __KERNEL_CS;
@@ -161,7 +162,8 @@ Efault_end:
user_access_end();
Efault:
pr_alert("could not access userspace vm86 info\n");
- do_exit(SIGSEGV);
+ force_sigsegv(SIGSEGV);
+ goto exit_vm86;
}
static int do_vm86_irq_handling(int subfunction, int irqnumber);
From: Eric W. Biederman <[email protected]>
commit 695dd0d634df8903e5ead8aa08d326f63b23368a upstream.
Directly calling do_exit with a signal number has the problem that
all of the side effects of the signal don't happen, such as
killing all of the threads of a process instead of just the
calling thread.
So replace do_exit(SIGSYS) with force_fatal_sig(SIGSYS) which
causes the signal handling to take it's normal path and work
as expected.
Cc: Andy Lutomirski <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Eric W. Biederman <[email protected]>
Cc: Thomas Backlund <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/entry/vsyscall/vsyscall_64.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/arch/x86/entry/vsyscall/vsyscall_64.c
+++ b/arch/x86/entry/vsyscall/vsyscall_64.c
@@ -226,7 +226,8 @@ bool emulate_vsyscall(unsigned long erro
if ((!tmp && regs->orig_ax != syscall_nr) || regs->ip != address) {
warn_bad_vsyscall(KERN_DEBUG, regs,
"seccomp tried to change syscall nr or ip");
- do_exit(SIGSYS);
+ force_fatal_sig(SIGSYS);
+ return true;
}
regs->orig_ax = -1;
if (tmp)
From: Eric W. Biederman <[email protected]>
commit e21294a7aaae32c5d7154b187113a04db5852e37 upstream.
Now that force_fatal_sig exists it is unnecessary and a bit confusing
to use force_sigsegv in cases where the simpler force_fatal_sig is
wanted. So change every instance we can to make the code clearer.
Acked-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Philippe Mathieu-Daudé <[email protected]>
Link: https://lkml.kernel.org/r/877de7jrev.fsf@disp2133
Signed-off-by: "Eric W. Biederman" <[email protected]>
Cc: Thomas Backlund <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/arc/kernel/process.c | 2 +-
arch/m68k/kernel/traps.c | 2 +-
arch/powerpc/kernel/signal_32.c | 2 +-
arch/powerpc/kernel/signal_64.c | 4 ++--
arch/s390/kernel/traps.c | 2 +-
arch/um/kernel/trap.c | 2 +-
arch/x86/kernel/vm86_32.c | 2 +-
fs/exec.c | 2 +-
8 files changed, 9 insertions(+), 9 deletions(-)
--- a/arch/arc/kernel/process.c
+++ b/arch/arc/kernel/process.c
@@ -294,7 +294,7 @@ int elf_check_arch(const struct elf32_hd
eflags = x->e_flags;
if ((eflags & EF_ARC_OSABI_MSK) != EF_ARC_OSABI_CURRENT) {
pr_err("ABI mismatch - you need newer toolchain\n");
- force_sigsegv(SIGSEGV);
+ force_fatal_sig(SIGSEGV);
return 0;
}
--- a/arch/m68k/kernel/traps.c
+++ b/arch/m68k/kernel/traps.c
@@ -1145,7 +1145,7 @@ asmlinkage void set_esp0(unsigned long s
*/
asmlinkage void fpsp040_die(void)
{
- force_sigsegv(SIGSEGV);
+ force_fatal_sig(SIGSEGV);
}
#ifdef CONFIG_M68KFPU_EMU
--- a/arch/powerpc/kernel/signal_32.c
+++ b/arch/powerpc/kernel/signal_32.c
@@ -1063,7 +1063,7 @@ SYSCALL_DEFINE3(swapcontext, struct ucon
* We kill the task with a SIGSEGV in this situation.
*/
if (do_setcontext(new_ctx, regs, 0)) {
- force_sigsegv(SIGSEGV);
+ force_fatal_sig(SIGSEGV);
return -EFAULT;
}
--- a/arch/powerpc/kernel/signal_64.c
+++ b/arch/powerpc/kernel/signal_64.c
@@ -704,7 +704,7 @@ SYSCALL_DEFINE3(swapcontext, struct ucon
*/
if (__get_user_sigset(&set, &new_ctx->uc_sigmask)) {
- force_sigsegv(SIGSEGV);
+ force_fatal_sig(SIGSEGV);
return -EFAULT;
}
set_current_blocked(&set);
@@ -713,7 +713,7 @@ SYSCALL_DEFINE3(swapcontext, struct ucon
return -EFAULT;
if (__unsafe_restore_sigcontext(current, NULL, 0, &new_ctx->uc_mcontext)) {
user_read_access_end();
- force_sigsegv(SIGSEGV);
+ force_fatal_sig(SIGSEGV);
return -EFAULT;
}
user_read_access_end();
--- a/arch/s390/kernel/traps.c
+++ b/arch/s390/kernel/traps.c
@@ -84,7 +84,7 @@ static void default_trap_handler(struct
{
if (user_mode(regs)) {
report_user_fault(regs, SIGSEGV, 0);
- force_sigsegv(SIGSEGV);
+ force_fatal_sig(SIGSEGV);
} else
die(regs, "Unknown program exception");
}
--- a/arch/um/kernel/trap.c
+++ b/arch/um/kernel/trap.c
@@ -158,7 +158,7 @@ static void bad_segv(struct faultinfo fi
void fatal_sigsegv(void)
{
- force_sigsegv(SIGSEGV);
+ force_fatal_sig(SIGSEGV);
do_signal(¤t->thread.regs);
/*
* This is to tell gcc that we're not returning - do_signal
--- a/arch/x86/kernel/vm86_32.c
+++ b/arch/x86/kernel/vm86_32.c
@@ -162,7 +162,7 @@ Efault_end:
user_access_end();
Efault:
pr_alert("could not access userspace vm86 info\n");
- force_sigsegv(SIGSEGV);
+ force_fatal_sig(SIGSEGV);
goto exit_vm86;
}
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -1852,7 +1852,7 @@ out:
* SIGSEGV.
*/
if (bprm->point_of_no_return && !fatal_signal_pending(current))
- force_sigsegv(SIGSEGV);
+ force_fatal_sig(SIGSEGV);
out_unmark:
current->fs->in_exec = 0;
From: Nadav Amit <[email protected]>
commit a4a118f2eead1d6c49e00765de89878288d4b890 upstream.
When __unmap_hugepage_range() calls to huge_pmd_unshare() succeed, a TLB
flush is missing. This TLB flush must be performed before releasing the
i_mmap_rwsem, in order to prevent an unshared PMDs page from being
released and reused before the TLB flush took place.
Arguably, a comprehensive solution would use mmu_gather interface to
batch the TLB flushes and the PMDs page release, however it is not an
easy solution: (1) try_to_unmap_one() and try_to_migrate_one() also call
huge_pmd_unshare() and they cannot use the mmu_gather interface; and (2)
deferring the release of the page reference for the PMDs page until
after i_mmap_rwsem is dropeed can confuse huge_pmd_unshare() into
thinking PMDs are shared when they are not.
Fix __unmap_hugepage_range() by adding the missing TLB flush, and
forcing a flush when unshare is successful.
Fixes: 24669e58477e ("hugetlb: use mmu_gather instead of a temporary linked list for accumulating pages)" # 3.6
Signed-off-by: Nadav Amit <[email protected]>
Reviewed-by: Mike Kravetz <[email protected]>
Cc: Aneesh Kumar K.V <[email protected]>
Cc: KAMEZAWA Hiroyuki <[email protected]>
Cc: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/hugetlb.c | 23 +++++++++++++++++++----
1 file changed, 19 insertions(+), 4 deletions(-)
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -4439,6 +4439,7 @@ void __unmap_hugepage_range(struct mmu_g
struct hstate *h = hstate_vma(vma);
unsigned long sz = huge_page_size(h);
struct mmu_notifier_range range;
+ bool force_flush = false;
WARN_ON(!is_vm_hugetlb_page(vma));
BUG_ON(start & ~huge_page_mask(h));
@@ -4467,10 +4468,8 @@ void __unmap_hugepage_range(struct mmu_g
ptl = huge_pte_lock(h, mm, ptep);
if (huge_pmd_unshare(mm, vma, &address, ptep)) {
spin_unlock(ptl);
- /*
- * We just unmapped a page of PMDs by clearing a PUD.
- * The caller's TLB flush range should cover this area.
- */
+ tlb_flush_pmd_range(tlb, address & PUD_MASK, PUD_SIZE);
+ force_flush = true;
continue;
}
@@ -4527,6 +4526,22 @@ void __unmap_hugepage_range(struct mmu_g
}
mmu_notifier_invalidate_range_end(&range);
tlb_end_vma(tlb, vma);
+
+ /*
+ * If we unshared PMDs, the TLB flush was not recorded in mmu_gather. We
+ * could defer the flush until now, since by holding i_mmap_rwsem we
+ * guaranteed that the last refernece would not be dropped. But we must
+ * do the flushing before we return, as otherwise i_mmap_rwsem will be
+ * dropped and the last reference to the shared PMDs page might be
+ * dropped as well.
+ *
+ * In theory we could defer the freeing of the PMD pages as well, but
+ * huge_pmd_unshare() relies on the exact page_count for the PMD page to
+ * detect sharing, so we cannot defer the release of the page either.
+ * Instead, do flush now.
+ */
+ if (force_flush)
+ tlb_flush_mmu_tlbonly(tlb);
}
void __unmap_hugepage_range_final(struct mmu_gather *tlb,
From: Leon Romanovsky <[email protected]>
commit 83dde7498fefeb920b1def317421262317d178e5 upstream.
Like other commits in the tree add __maybe_unused to a static inline in a
C file because some clang compilers will complain about unused code:
>> drivers/infiniband/core/nldev.c:2543:1: warning: unused function '__chk_RDMA_NL_NLDEV'
MODULE_ALIAS_RDMA_NETLINK(RDMA_NL_NLDEV, 5);
^
Fixes: e3bf14bdc17a ("rdma: Autoload netlink client modules")
Link: https://lore.kernel.org/r/4a8101919b765e01d7fde6f27fd572c958deeb4a.1636267207.git.leonro@nvidia.com
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Leon Romanovsky <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/rdma/rdma_netlink.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/include/rdma/rdma_netlink.h
+++ b/include/rdma/rdma_netlink.h
@@ -30,7 +30,7 @@ enum rdma_nl_flags {
* constant as well and the compiler checks they are the same.
*/
#define MODULE_ALIAS_RDMA_NETLINK(_index, _val) \
- static inline void __chk_##_index(void) \
+ static inline void __maybe_unused __chk_##_index(void) \
{ \
BUILD_BUG_ON(_index != _val); \
} \
From: Eric W. Biederman <[email protected]>
commit c317d306d55079525c9610267fdaf3a8a6d2f08b upstream.
The function try_to_clear_window_buffer is only called from
rtrap_32.c. After it is called the signal pending state is retested,
and signals are handled if TIF_SIGPENDING is set. This allows
try_to_clear_window_buffer to call force_fatal_signal and then rely on
the signal being delivered to kill the process, without any danger of
returning to userspace, or otherwise using possible corrupt state on
failure.
The functional difference between force_fatal_sig and do_exit is that
do_exit will only terminate a single thread, and will never trigger a
core-dump. A multi-threaded program for which a single thread
terminates unexpectedly is hard to reason about. Calling force_fatal_sig
does not give userspace a chance to catch the signal, but otherwise
is an ordinary fatal signal exit, and it will trigger a coredump
of the offending process if core dumps are enabled.
Cc: David Miller <[email protected]>
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Eric W. Biederman <[email protected]>
Cc: Thomas Backlund <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/sparc/kernel/windows.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/arch/sparc/kernel/windows.c
+++ b/arch/sparc/kernel/windows.c
@@ -121,8 +121,10 @@ void try_to_clear_window_buffer(struct p
if ((sp & 7) ||
copy_to_user((char __user *) sp, &tp->reg_window[window],
- sizeof(struct reg_window32)))
- do_exit(SIGILL);
+ sizeof(struct reg_window32))) {
+ force_fatal_sig(SIGILL);
+ return;
+ }
}
tp->w_saved = 0;
}
From: Josef Bacik <[email protected]>
commit e60feb445fce9e51c1558a6aa7faf9dd5ded533b upstream.
If you already have an inode and need to update the time on the inode
there is no way to do this properly. Export this helper to allow file
systems to update time on the inode so the appropriate handler is
called, either ->update_time or generic_update_time.
Signed-off-by: Josef Bacik <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/inode.c | 7 ++++---
include/linux/fs.h | 2 ++
2 files changed, 6 insertions(+), 3 deletions(-)
--- a/fs/inode.c
+++ b/fs/inode.c
@@ -1782,12 +1782,13 @@ EXPORT_SYMBOL(generic_update_time);
* This does the actual work of updating an inodes time or version. Must have
* had called mnt_want_write() before calling this.
*/
-static int update_time(struct inode *inode, struct timespec64 *time, int flags)
+int inode_update_time(struct inode *inode, struct timespec64 *time, int flags)
{
if (inode->i_op->update_time)
return inode->i_op->update_time(inode, time, flags);
return generic_update_time(inode, time, flags);
}
+EXPORT_SYMBOL(inode_update_time);
/**
* atime_needs_update - update the access time
@@ -1857,7 +1858,7 @@ void touch_atime(const struct path *path
* of the fs read only, e.g. subvolumes in Btrfs.
*/
now = current_time(inode);
- update_time(inode, &now, S_ATIME);
+ inode_update_time(inode, &now, S_ATIME);
__mnt_drop_write(mnt);
skip_update:
sb_end_write(inode->i_sb);
@@ -2002,7 +2003,7 @@ int file_update_time(struct file *file)
if (__mnt_want_write_file(file))
return 0;
- ret = update_time(inode, &now, sync_it);
+ ret = inode_update_time(inode, &now, sync_it);
__mnt_drop_write_file(file);
return ret;
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -2498,6 +2498,8 @@ enum file_time_flags {
extern bool atime_needs_update(const struct path *, struct inode *);
extern void touch_atime(const struct path *);
+int inode_update_time(struct inode *inode, struct timespec64 *time, int flags);
+
static inline void file_accessed(struct file *file)
{
if (!(file->f_flags & O_NOATIME))
From: Brett Creeley <[email protected]>
commit 1a8c7778bcde5981463a5b9f9b2caa44a327ff93 upstream.
When a VF requests promiscuous mode and it's trusted and true promiscuous
mode is enabled the PF driver attempts to enable unicast and/or
multicast promiscuous mode filters based on the request. This is fine,
but there are a couple issues with the current code.
[1] The define to configure the unicast promiscuous mode mask also
includes bits to configure the multicast promiscuous mode mask, which
causes multicast to be set/cleared unintentionally.
[2] All 4 cases for enable/disable unicast/multicast mode are not
handled in the promiscuous mode message handler, which causes
unexpected results regarding the current promiscuous mode settings.
To fix [1] make sure any promiscuous mask defines include the correct
bits for each of the promiscuous modes.
To fix [2] make sure that all 4 cases are handled since there are 2 bits
(FLAG_VF_UNICAST_PROMISC and FLAG_VF_MULTICAST_PROMISC) that can be
either set or cleared. Also, since either unicast and/or multicast
promiscuous configuration can fail, introduce two separate error values
to handle each of these cases.
Fixes: 01b5e89aab49 ("ice: Add VF promiscuous support")
Signed-off-by: Brett Creeley <[email protected]>
Tested-by: Tony Brelinski <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/intel/ice/ice.h | 5 -
drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c | 78 +++++++++++------------
2 files changed, 40 insertions(+), 43 deletions(-)
--- a/drivers/net/ethernet/intel/ice/ice.h
+++ b/drivers/net/ethernet/intel/ice/ice.h
@@ -139,13 +139,10 @@
#define ice_for_each_q_vector(vsi, i) \
for ((i) = 0; (i) < (vsi)->num_q_vectors; (i)++)
-#define ICE_UCAST_PROMISC_BITS (ICE_PROMISC_UCAST_TX | ICE_PROMISC_MCAST_TX | \
- ICE_PROMISC_UCAST_RX | ICE_PROMISC_MCAST_RX)
+#define ICE_UCAST_PROMISC_BITS (ICE_PROMISC_UCAST_TX | ICE_PROMISC_UCAST_RX)
#define ICE_UCAST_VLAN_PROMISC_BITS (ICE_PROMISC_UCAST_TX | \
- ICE_PROMISC_MCAST_TX | \
ICE_PROMISC_UCAST_RX | \
- ICE_PROMISC_MCAST_RX | \
ICE_PROMISC_VLAN_TX | \
ICE_PROMISC_VLAN_RX)
--- a/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c
+++ b/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c
@@ -2952,6 +2952,7 @@ bool ice_is_any_vf_in_promisc(struct ice
static int ice_vc_cfg_promiscuous_mode_msg(struct ice_vf *vf, u8 *msg)
{
enum virtchnl_status_code v_ret = VIRTCHNL_STATUS_SUCCESS;
+ enum ice_status mcast_status = 0, ucast_status = 0;
bool rm_promisc, alluni = false, allmulti = false;
struct virtchnl_promisc_info *info =
(struct virtchnl_promisc_info *)msg;
@@ -3041,52 +3042,51 @@ static int ice_vc_cfg_promiscuous_mode_m
goto error_param;
}
} else {
- enum ice_status status;
- u8 promisc_m;
+ u8 mcast_m, ucast_m;
- if (alluni) {
- if (vf->port_vlan_info || vsi->num_vlan)
- promisc_m = ICE_UCAST_VLAN_PROMISC_BITS;
- else
- promisc_m = ICE_UCAST_PROMISC_BITS;
- } else if (allmulti) {
- if (vf->port_vlan_info || vsi->num_vlan)
- promisc_m = ICE_MCAST_VLAN_PROMISC_BITS;
- else
- promisc_m = ICE_MCAST_PROMISC_BITS;
+ if (vf->port_vlan_info || vsi->num_vlan > 1) {
+ mcast_m = ICE_MCAST_VLAN_PROMISC_BITS;
+ ucast_m = ICE_UCAST_VLAN_PROMISC_BITS;
} else {
- if (vf->port_vlan_info || vsi->num_vlan)
- promisc_m = ICE_UCAST_VLAN_PROMISC_BITS;
- else
- promisc_m = ICE_UCAST_PROMISC_BITS;
+ mcast_m = ICE_MCAST_PROMISC_BITS;
+ ucast_m = ICE_UCAST_PROMISC_BITS;
}
- /* Configure multicast/unicast with or without VLAN promiscuous
- * mode
- */
- status = ice_vf_set_vsi_promisc(vf, vsi, promisc_m, rm_promisc);
- if (status) {
- dev_err(dev, "%sable Tx/Rx filter promiscuous mode on VF-%d failed, error: %s\n",
- rm_promisc ? "dis" : "en", vf->vf_id,
- ice_stat_str(status));
- v_ret = ice_err_to_virt_err(status);
- goto error_param;
- } else {
- dev_dbg(dev, "%sable Tx/Rx filter promiscuous mode on VF-%d succeeded\n",
- rm_promisc ? "dis" : "en", vf->vf_id);
+ ucast_status = ice_vf_set_vsi_promisc(vf, vsi, ucast_m,
+ !alluni);
+ if (ucast_status) {
+ dev_err(dev, "%sable Tx/Rx filter promiscuous mode on VF-%d failed\n",
+ alluni ? "en" : "dis", vf->vf_id);
+ v_ret = ice_err_to_virt_err(ucast_status);
+ }
+
+ mcast_status = ice_vf_set_vsi_promisc(vf, vsi, mcast_m,
+ !allmulti);
+ if (mcast_status) {
+ dev_err(dev, "%sable Tx/Rx filter promiscuous mode on VF-%d failed\n",
+ allmulti ? "en" : "dis", vf->vf_id);
+ v_ret = ice_err_to_virt_err(mcast_status);
}
}
- if (allmulti &&
- !test_and_set_bit(ICE_VF_STATE_MC_PROMISC, vf->vf_states))
- dev_info(dev, "VF %u successfully set multicast promiscuous mode\n", vf->vf_id);
- else if (!allmulti && test_and_clear_bit(ICE_VF_STATE_MC_PROMISC, vf->vf_states))
- dev_info(dev, "VF %u successfully unset multicast promiscuous mode\n", vf->vf_id);
-
- if (alluni && !test_and_set_bit(ICE_VF_STATE_UC_PROMISC, vf->vf_states))
- dev_info(dev, "VF %u successfully set unicast promiscuous mode\n", vf->vf_id);
- else if (!alluni && test_and_clear_bit(ICE_VF_STATE_UC_PROMISC, vf->vf_states))
- dev_info(dev, "VF %u successfully unset unicast promiscuous mode\n", vf->vf_id);
+ if (!mcast_status) {
+ if (allmulti &&
+ !test_and_set_bit(ICE_VF_STATE_MC_PROMISC, vf->vf_states))
+ dev_info(dev, "VF %u successfully set multicast promiscuous mode\n",
+ vf->vf_id);
+ else if (!allmulti && test_and_clear_bit(ICE_VF_STATE_MC_PROMISC, vf->vf_states))
+ dev_info(dev, "VF %u successfully unset multicast promiscuous mode\n",
+ vf->vf_id);
+ }
+
+ if (!ucast_status) {
+ if (alluni && !test_and_set_bit(ICE_VF_STATE_UC_PROMISC, vf->vf_states))
+ dev_info(dev, "VF %u successfully set unicast promiscuous mode\n",
+ vf->vf_id);
+ else if (!alluni && test_and_clear_bit(ICE_VF_STATE_UC_PROMISC, vf->vf_states))
+ dev_info(dev, "VF %u successfully unset unicast promiscuous mode\n",
+ vf->vf_id);
+ }
error_param:
return ice_vc_send_msg_to_vf(vf, VIRTCHNL_OP_CONFIG_PROMISCUOUS_MODE,
From: Uwe Kleine-König <[email protected]>
commit fc153aba3ef371d0d76eb88230ed4e0dee5b38f2 upstream.
Instead of maintaining a single-linked list of devices that must be
searched linearly in .remove() just use spi_set_drvdata() to remember the
link between the spi device and the driver struct. Then the global list
and the next member can be dropped.
This simplifies the driver, reduces the memory footprint and the time to
search the list. Also it makes obvious that there is always a corresponding
driver struct for a given device in .remove(), so the error path for
!max3421_hcd can be dropped, too.
As a side effect this fixes a data inconsistency when .probe() races with
itself for a second max3421 device in manipulating max3421_hcd_list. A
similar race is fixed in .remove(), too.
Fixes: 2d53139f3162 ("Add support for using a MAX3421E chip as a host driver.")
Signed-off-by: Uwe Kleine-König <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/host/max3421-hcd.c | 25 +++++--------------------
1 file changed, 5 insertions(+), 20 deletions(-)
--- a/drivers/usb/host/max3421-hcd.c
+++ b/drivers/usb/host/max3421-hcd.c
@@ -125,8 +125,6 @@ struct max3421_hcd {
struct task_struct *spi_thread;
- struct max3421_hcd *next;
-
enum max3421_rh_state rh_state;
/* lower 16 bits contain port status, upper 16 bits the change mask: */
u32 port_status;
@@ -174,8 +172,6 @@ struct max3421_ep {
u8 retransmit; /* packet needs retransmission */
};
-static struct max3421_hcd *max3421_hcd_list;
-
#define MAX3421_FIFO_SIZE 64
#define MAX3421_SPI_DIR_RD 0 /* read register from MAX3421 */
@@ -1882,9 +1878,8 @@ max3421_probe(struct spi_device *spi)
}
set_bit(HCD_FLAG_POLL_RH, &hcd->flags);
max3421_hcd = hcd_to_max3421(hcd);
- max3421_hcd->next = max3421_hcd_list;
- max3421_hcd_list = max3421_hcd;
INIT_LIST_HEAD(&max3421_hcd->ep_list);
+ spi_set_drvdata(spi, max3421_hcd);
max3421_hcd->tx = kmalloc(sizeof(*max3421_hcd->tx), GFP_KERNEL);
if (!max3421_hcd->tx)
@@ -1934,28 +1929,18 @@ error:
static int
max3421_remove(struct spi_device *spi)
{
- struct max3421_hcd *max3421_hcd = NULL, **prev;
- struct usb_hcd *hcd = NULL;
+ struct max3421_hcd *max3421_hcd;
+ struct usb_hcd *hcd;
unsigned long flags;
- for (prev = &max3421_hcd_list; *prev; prev = &(*prev)->next) {
- max3421_hcd = *prev;
- hcd = max3421_to_hcd(max3421_hcd);
- if (hcd->self.controller == &spi->dev)
- break;
- }
- if (!max3421_hcd) {
- dev_err(&spi->dev, "no MAX3421 HCD found for SPI device %p\n",
- spi);
- return -ENODEV;
- }
+ max3421_hcd = spi_get_drvdata(spi);
+ hcd = max3421_to_hcd(max3421_hcd);
usb_remove_hcd(hcd);
spin_lock_irqsave(&max3421_hcd->lock, flags);
kthread_stop(max3421_hcd->spi_thread);
- *prev = max3421_hcd->next;
spin_unlock_irqrestore(&max3421_hcd->lock, flags);
From: Leon Romanovsky <[email protected]>
commit 2ff04286a9569675948f39cec2c6ad47c3584633 upstream.
PF pointer is always valid when PCI core calls its .shutdown() and
.remove() callbacks. There is no need to check it again.
Fixes: 837f08fdecbe ("ice: Add basic driver framework for Intel(R) E800 Series")
Signed-off-by: Leon Romanovsky <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/intel/ice/ice_main.c | 3 ---
1 file changed, 3 deletions(-)
--- a/drivers/net/ethernet/intel/ice/ice_main.c
+++ b/drivers/net/ethernet/intel/ice/ice_main.c
@@ -4600,9 +4600,6 @@ static void ice_remove(struct pci_dev *p
struct ice_pf *pf = pci_get_drvdata(pdev);
int i;
- if (!pf)
- return;
-
for (i = 0; i < ICE_MAX_RESET_WAIT; i++) {
if (!ice_is_reset_in_progress(pf->state))
break;
From: Takashi Iwai <[email protected]>
commit 827b0913a9d9d07a0c3e559dbb20ca4d6d285a54 upstream.
The recent fix for DAPM to correct the kctl change notification by the
commit 5af82c81b2c4 ("ASoC: DAPM: Fix missing kctl change
notifications") caused other regressions since it changed the behavior
of snd_soc_dapm_set_pin() that is called from several API functions.
Formerly it returned always 0 for success, but now it returns 0 or 1.
This patch addresses it, restoring the old behavior of
snd_soc_dapm_set_pin() while keeping the fix in
snd_soc_dapm_put_pin_switch().
Fixes: 5af82c81b2c4 ("ASoC: DAPM: Fix missing kctl change notifications")
Reported-by: Yu-Hsuan Hsu <[email protected]>
Cc: <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/soc/soc-dapm.c | 29 +++++++++++++++++++++++------
1 file changed, 23 insertions(+), 6 deletions(-)
--- a/sound/soc/soc-dapm.c
+++ b/sound/soc/soc-dapm.c
@@ -2557,8 +2557,13 @@ static struct snd_soc_dapm_widget *dapm_
return NULL;
}
-static int snd_soc_dapm_set_pin(struct snd_soc_dapm_context *dapm,
- const char *pin, int status)
+/*
+ * set the DAPM pin status:
+ * returns 1 when the value has been updated, 0 when unchanged, or a negative
+ * error code; called from kcontrol put callback
+ */
+static int __snd_soc_dapm_set_pin(struct snd_soc_dapm_context *dapm,
+ const char *pin, int status)
{
struct snd_soc_dapm_widget *w = dapm_find_widget(dapm, pin, true);
int ret = 0;
@@ -2584,6 +2589,18 @@ static int snd_soc_dapm_set_pin(struct s
return ret;
}
+/*
+ * similar as __snd_soc_dapm_set_pin(), but returns 0 when successful;
+ * called from several API functions below
+ */
+static int snd_soc_dapm_set_pin(struct snd_soc_dapm_context *dapm,
+ const char *pin, int status)
+{
+ int ret = __snd_soc_dapm_set_pin(dapm, pin, status);
+
+ return ret < 0 ? ret : 0;
+}
+
/**
* snd_soc_dapm_sync_unlocked - scan and power dapm paths
* @dapm: DAPM context
@@ -3587,10 +3604,10 @@ int snd_soc_dapm_put_pin_switch(struct s
const char *pin = (const char *)kcontrol->private_value;
int ret;
- if (ucontrol->value.integer.value[0])
- ret = snd_soc_dapm_enable_pin(&card->dapm, pin);
- else
- ret = snd_soc_dapm_disable_pin(&card->dapm, pin);
+ mutex_lock_nested(&card->dapm_mutex, SND_SOC_DAPM_CLASS_RUNTIME);
+ ret = __snd_soc_dapm_set_pin(&card->dapm, pin,
+ !!ucontrol->value.integer.value[0]);
+ mutex_unlock(&card->dapm_mutex);
snd_soc_dapm_sync(&card->dapm);
return ret;
From: Eric W. Biederman <[email protected]>
commit fcb116bc43c8c37c052530ead79872f8b2615711 upstream.
Recently to prevent issues with SECCOMP_RET_KILL and similar signals
being changed before they are delivered SA_IMMUTABLE was added.
Unfortunately this broke debuggers[1][2] which reasonably expect
to be able to trap synchronous SIGTRAP and SIGSEGV even when
the target process is not configured to handle those signals.
Add force_exit_sig and use it instead of force_fatal_sig where
historically the code has directly called do_exit. This has the
implementation benefits of going through the signal exit path
(including generating core dumps) without the danger of allowing
userspace to ignore or change these signals.
This avoids userspace regressions as older kernels exited with do_exit
which debuggers also can not intercept.
In the future is should be possible to improve the quality of
implementation of the kernel by changing some of these force_exit_sig
calls to force_fatal_sig. That can be done where it matters on
a case-by-case basis with careful analysis.
Reported-by: Kyle Huey <[email protected]>
Reported-by: kernel test robot <[email protected]>
[1] https://lkml.kernel.org/r/CAP045AoMY4xf8aC_4QU_-j7obuEPYgTcnQQP3Yxk=2X90jtpjw@mail.gmail.com
[2] https://lkml.kernel.org/r/20211117150258.GB5403@xsang-OptiPlex-9020
Fixes: 00b06da29cf9 ("signal: Add SA_IMMUTABLE to ensure forced siganls do not get changed")
Fixes: a3616a3c0272 ("signal/m68k: Use force_sigsegv(SIGSEGV) in fpsp040_die")
Fixes: 83a1f27ad773 ("signal/powerpc: On swapcontext failure force SIGSEGV")
Fixes: 9bc508cf0791 ("signal/s390: Use force_sigsegv in default_trap_handler")
Fixes: 086ec444f866 ("signal/sparc32: In setup_rt_frame and setup_fram use force_fatal_sig")
Fixes: c317d306d550 ("signal/sparc32: Exit with a fatal signal when try_to_clear_window_buffer fails")
Fixes: 695dd0d634df ("signal/x86: In emulate_vsyscall force a signal instead of calling do_exit")
Fixes: 1fbd60df8a85 ("signal/vm86_32: Properly send SIGSEGV when the vm86 state cannot be saved.")
Fixes: 941edc5bf174 ("exit/syscall_user_dispatch: Send ordinary signals on failure")
Link: https://lkml.kernel.org/r/[email protected]
Reviewed-by: Kees Cook <[email protected]>
Tested-by: Kees Cook <[email protected]>
Tested-by: Kyle Huey <[email protected]>
Signed-off-by: "Eric W. Biederman" <[email protected]>
Cc: Thomas Backlund <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/m68k/kernel/traps.c | 2 +-
arch/powerpc/kernel/signal_32.c | 2 +-
arch/powerpc/kernel/signal_64.c | 4 ++--
arch/s390/kernel/traps.c | 2 +-
arch/sparc/kernel/signal_32.c | 4 ++--
arch/sparc/kernel/windows.c | 2 +-
arch/x86/entry/vsyscall/vsyscall_64.c | 2 +-
arch/x86/kernel/vm86_32.c | 2 +-
include/linux/sched/signal.h | 1 +
kernel/entry/syscall_user_dispatch.c | 4 ++--
kernel/signal.c | 13 +++++++++++++
11 files changed, 26 insertions(+), 12 deletions(-)
--- a/arch/m68k/kernel/traps.c
+++ b/arch/m68k/kernel/traps.c
@@ -1145,7 +1145,7 @@ asmlinkage void set_esp0(unsigned long s
*/
asmlinkage void fpsp040_die(void)
{
- force_fatal_sig(SIGSEGV);
+ force_exit_sig(SIGSEGV);
}
#ifdef CONFIG_M68KFPU_EMU
--- a/arch/powerpc/kernel/signal_32.c
+++ b/arch/powerpc/kernel/signal_32.c
@@ -1063,7 +1063,7 @@ SYSCALL_DEFINE3(swapcontext, struct ucon
* We kill the task with a SIGSEGV in this situation.
*/
if (do_setcontext(new_ctx, regs, 0)) {
- force_fatal_sig(SIGSEGV);
+ force_exit_sig(SIGSEGV);
return -EFAULT;
}
--- a/arch/powerpc/kernel/signal_64.c
+++ b/arch/powerpc/kernel/signal_64.c
@@ -704,7 +704,7 @@ SYSCALL_DEFINE3(swapcontext, struct ucon
*/
if (__get_user_sigset(&set, &new_ctx->uc_sigmask)) {
- force_fatal_sig(SIGSEGV);
+ force_exit_sig(SIGSEGV);
return -EFAULT;
}
set_current_blocked(&set);
@@ -713,7 +713,7 @@ SYSCALL_DEFINE3(swapcontext, struct ucon
return -EFAULT;
if (__unsafe_restore_sigcontext(current, NULL, 0, &new_ctx->uc_mcontext)) {
user_read_access_end();
- force_fatal_sig(SIGSEGV);
+ force_exit_sig(SIGSEGV);
return -EFAULT;
}
user_read_access_end();
--- a/arch/s390/kernel/traps.c
+++ b/arch/s390/kernel/traps.c
@@ -84,7 +84,7 @@ static void default_trap_handler(struct
{
if (user_mode(regs)) {
report_user_fault(regs, SIGSEGV, 0);
- force_fatal_sig(SIGSEGV);
+ force_exit_sig(SIGSEGV);
} else
die(regs, "Unknown program exception");
}
--- a/arch/sparc/kernel/signal_32.c
+++ b/arch/sparc/kernel/signal_32.c
@@ -244,7 +244,7 @@ static int setup_frame(struct ksignal *k
get_sigframe(ksig, regs, sigframe_size);
if (invalid_frame_pointer(sf, sigframe_size)) {
- force_fatal_sig(SIGILL);
+ force_exit_sig(SIGILL);
return -EINVAL;
}
@@ -336,7 +336,7 @@ static int setup_rt_frame(struct ksignal
sf = (struct rt_signal_frame __user *)
get_sigframe(ksig, regs, sigframe_size);
if (invalid_frame_pointer(sf, sigframe_size)) {
- force_fatal_sig(SIGILL);
+ force_exit_sig(SIGILL);
return -EINVAL;
}
--- a/arch/sparc/kernel/windows.c
+++ b/arch/sparc/kernel/windows.c
@@ -122,7 +122,7 @@ void try_to_clear_window_buffer(struct p
if ((sp & 7) ||
copy_to_user((char __user *) sp, &tp->reg_window[window],
sizeof(struct reg_window32))) {
- force_fatal_sig(SIGILL);
+ force_exit_sig(SIGILL);
return;
}
}
--- a/arch/x86/entry/vsyscall/vsyscall_64.c
+++ b/arch/x86/entry/vsyscall/vsyscall_64.c
@@ -226,7 +226,7 @@ bool emulate_vsyscall(unsigned long erro
if ((!tmp && regs->orig_ax != syscall_nr) || regs->ip != address) {
warn_bad_vsyscall(KERN_DEBUG, regs,
"seccomp tried to change syscall nr or ip");
- force_fatal_sig(SIGSYS);
+ force_exit_sig(SIGSYS);
return true;
}
regs->orig_ax = -1;
--- a/arch/x86/kernel/vm86_32.c
+++ b/arch/x86/kernel/vm86_32.c
@@ -162,7 +162,7 @@ Efault_end:
user_access_end();
Efault:
pr_alert("could not access userspace vm86 info\n");
- force_fatal_sig(SIGSEGV);
+ force_exit_sig(SIGSEGV);
goto exit_vm86;
}
--- a/include/linux/sched/signal.h
+++ b/include/linux/sched/signal.h
@@ -339,6 +339,7 @@ extern __must_check bool do_notify_paren
extern void __wake_up_parent(struct task_struct *p, struct task_struct *parent);
extern void force_sig(int);
extern void force_fatal_sig(int);
+extern void force_exit_sig(int);
extern int send_sig(int, struct task_struct *, int);
extern int zap_other_threads(struct task_struct *p);
extern struct sigqueue *sigqueue_alloc(void);
--- a/kernel/entry/syscall_user_dispatch.c
+++ b/kernel/entry/syscall_user_dispatch.c
@@ -48,7 +48,7 @@ bool syscall_user_dispatch(struct pt_reg
* the selector is loaded by userspace.
*/
if (unlikely(__get_user(state, sd->selector))) {
- force_fatal_sig(SIGSEGV);
+ force_exit_sig(SIGSEGV);
return true;
}
@@ -56,7 +56,7 @@ bool syscall_user_dispatch(struct pt_reg
return false;
if (state != SYSCALL_DISPATCH_FILTER_BLOCK) {
- force_fatal_sig(SIGSYS);
+ force_exit_sig(SIGSYS);
return true;
}
}
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -1671,6 +1671,19 @@ void force_fatal_sig(int sig)
force_sig_info_to_task(&info, current, HANDLER_SIG_DFL);
}
+void force_exit_sig(int sig)
+{
+ struct kernel_siginfo info;
+
+ clear_siginfo(&info);
+ info.si_signo = sig;
+ info.si_errno = 0;
+ info.si_code = SI_KERNEL;
+ info.si_pid = 0;
+ info.si_uid = 0;
+ force_sig_info_to_task(&info, current, HANDLER_EXIT);
+}
+
/*
* When things go south during signal handling, we
* will force a SIGSEGV. And if the signal that caused
From: Eric W. Biederman <[email protected]>
commit 086ec444f86660e103de8945d0dcae9b67132ac9 upstream.
Modify the 32bit version of setup_rt_frame and setup_frame to act
similar to the 64bit version of setup_rt_frame and fail with a signal
instead of calling do_exit.
Replacing do_exit(SIGILL) with force_fatal_signal(SIGILL) ensures that
the process will be terminated cleanly when the stack frame is
invalid, instead of just killing off a single thread and leaving the
process is a weird state.
Cc: David Miller <[email protected]>
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Eric W. Biederman <[email protected]>
Cc: Thomas Backlund <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/sparc/kernel/signal_32.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/arch/sparc/kernel/signal_32.c
+++ b/arch/sparc/kernel/signal_32.c
@@ -244,7 +244,7 @@ static int setup_frame(struct ksignal *k
get_sigframe(ksig, regs, sigframe_size);
if (invalid_frame_pointer(sf, sigframe_size)) {
- do_exit(SIGILL);
+ force_fatal_sig(SIGILL);
return -EINVAL;
}
@@ -336,7 +336,7 @@ static int setup_rt_frame(struct ksignal
sf = (struct rt_signal_frame __user *)
get_sigframe(ksig, regs, sigframe_size);
if (invalid_frame_pointer(sf, sigframe_size)) {
- do_exit(SIGILL);
+ force_fatal_sig(SIGILL);
return -EINVAL;
}
From: Eric W. Biederman <[email protected]>
commit e349d945fac76bddc78ae1cb92a0145b427a87ce upstream.
Recently to prevent issues with SECCOMP_RET_KILL and similar signals
being changed before they are delivered SA_IMMUTABLE was added.
Unfortunately this broke debuggers[1][2] which reasonably expect to be
able to trap synchronous SIGTRAP and SIGSEGV even when the target
process is not configured to handle those signals.
Update force_sig_to_task to support both the case when we can allow
the debugger to intercept and possibly ignore the signal and the case
when it is not safe to let userspace know about the signal until the
process has exited.
Suggested-by: Linus Torvalds <[email protected]>
Reported-by: Kyle Huey <[email protected]>
Reported-by: kernel test robot <[email protected]>
Cc: [email protected]
[1] https://lkml.kernel.org/r/CAP045AoMY4xf8aC_4QU_-j7obuEPYgTcnQQP3Yxk=2X90jtpjw@mail.gmail.com
[2] https://lkml.kernel.org/r/20211117150258.GB5403@xsang-OptiPlex-9020
Fixes: 00b06da29cf9 ("signal: Add SA_IMMUTABLE to ensure forced siganls do not get changed")
Link: https://lkml.kernel.org/r/[email protected]
Reviewed-by: Kees Cook <[email protected]>
Tested-by: Kees Cook <[email protected]>
Tested-by: Kyle Huey <[email protected]>
Signed-off-by: "Eric W. Biederman" <[email protected]>
Cc: Thomas Backlund <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/signal.c | 23 ++++++++++++++++-------
1 file changed, 16 insertions(+), 7 deletions(-)
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -1298,6 +1298,12 @@ int do_send_sig_info(int sig, struct ker
return ret;
}
+enum sig_handler {
+ HANDLER_CURRENT, /* If reachable use the current handler */
+ HANDLER_SIG_DFL, /* Always use SIG_DFL handler semantics */
+ HANDLER_EXIT, /* Only visible as the process exit code */
+};
+
/*
* Force a signal that the process can't ignore: if necessary
* we unblock the signal and change any SIG_IGN to SIG_DFL.
@@ -1310,7 +1316,8 @@ int do_send_sig_info(int sig, struct ker
* that is why we also clear SIGNAL_UNKILLABLE.
*/
static int
-force_sig_info_to_task(struct kernel_siginfo *info, struct task_struct *t, bool sigdfl)
+force_sig_info_to_task(struct kernel_siginfo *info, struct task_struct *t,
+ enum sig_handler handler)
{
unsigned long int flags;
int ret, blocked, ignored;
@@ -1321,9 +1328,10 @@ force_sig_info_to_task(struct kernel_sig
action = &t->sighand->action[sig-1];
ignored = action->sa.sa_handler == SIG_IGN;
blocked = sigismember(&t->blocked, sig);
- if (blocked || ignored || sigdfl) {
+ if (blocked || ignored || (handler != HANDLER_CURRENT)) {
action->sa.sa_handler = SIG_DFL;
- action->sa.sa_flags |= SA_IMMUTABLE;
+ if (handler == HANDLER_EXIT)
+ action->sa.sa_flags |= SA_IMMUTABLE;
if (blocked) {
sigdelset(&t->blocked, sig);
recalc_sigpending_and_wake(t);
@@ -1343,7 +1351,7 @@ force_sig_info_to_task(struct kernel_sig
int force_sig_info(struct kernel_siginfo *info)
{
- return force_sig_info_to_task(info, current, false);
+ return force_sig_info_to_task(info, current, HANDLER_CURRENT);
}
/*
@@ -1660,7 +1668,7 @@ void force_fatal_sig(int sig)
info.si_code = SI_KERNEL;
info.si_pid = 0;
info.si_uid = 0;
- force_sig_info_to_task(&info, current, true);
+ force_sig_info_to_task(&info, current, HANDLER_SIG_DFL);
}
/*
@@ -1693,7 +1701,7 @@ int force_sig_fault_to_task(int sig, int
info.si_flags = flags;
info.si_isr = isr;
#endif
- return force_sig_info_to_task(&info, t, false);
+ return force_sig_info_to_task(&info, t, HANDLER_CURRENT);
}
int force_sig_fault(int sig, int code, void __user *addr
@@ -1813,7 +1821,8 @@ int force_sig_seccomp(int syscall, int r
info.si_errno = reason;
info.si_arch = syscall_get_arch(current);
info.si_syscall = syscall;
- return force_sig_info_to_task(&info, current, force_coredump);
+ return force_sig_info_to_task(&info, current,
+ force_coredump ? HANDLER_EXIT : HANDLER_CURRENT);
}
/* For the crazy architectures that include trap information in
From: Dmitrii Banshchikov <[email protected]>
commit 5e0bc3082e2e403ac0753e099c2b01446bb35578 upstream.
Use of bpf_ktime_get_coarse_ns() and bpf_timer_* helpers in tracing
progs may result in locking issues.
bpf_ktime_get_coarse_ns() uses ktime_get_coarse_ns() time accessor that
isn't safe for any context:
======================================================
WARNING: possible circular locking dependency detected
5.15.0-syzkaller #0 Not tainted
------------------------------------------------------
syz-executor.4/14877 is trying to acquire lock:
ffffffff8cb30008 (tk_core.seq.seqcount){----}-{0:0}, at: ktime_get_coarse_ts64+0x25/0x110 kernel/time/timekeeping.c:2255
but task is already holding lock:
ffffffff90dbf200 (&obj_hash[i].lock){-.-.}-{2:2}, at: debug_object_deactivate+0x61/0x400 lib/debugobjects.c:735
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (&obj_hash[i].lock){-.-.}-{2:2}:
lock_acquire+0x19f/0x4d0 kernel/locking/lockdep.c:5625
__raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
_raw_spin_lock_irqsave+0xd1/0x120 kernel/locking/spinlock.c:162
__debug_object_init+0xd9/0x1860 lib/debugobjects.c:569
debug_hrtimer_init kernel/time/hrtimer.c:414 [inline]
debug_init kernel/time/hrtimer.c:468 [inline]
hrtimer_init+0x20/0x40 kernel/time/hrtimer.c:1592
ntp_init_cmos_sync kernel/time/ntp.c:676 [inline]
ntp_init+0xa1/0xad kernel/time/ntp.c:1095
timekeeping_init+0x512/0x6bf kernel/time/timekeeping.c:1639
start_kernel+0x267/0x56e init/main.c:1030
secondary_startup_64_no_verify+0xb1/0xbb
-> #0 (tk_core.seq.seqcount){----}-{0:0}:
check_prev_add kernel/locking/lockdep.c:3051 [inline]
check_prevs_add kernel/locking/lockdep.c:3174 [inline]
validate_chain+0x1dfb/0x8240 kernel/locking/lockdep.c:3789
__lock_acquire+0x1382/0x2b00 kernel/locking/lockdep.c:5015
lock_acquire+0x19f/0x4d0 kernel/locking/lockdep.c:5625
seqcount_lockdep_reader_access+0xfe/0x230 include/linux/seqlock.h:103
ktime_get_coarse_ts64+0x25/0x110 kernel/time/timekeeping.c:2255
ktime_get_coarse include/linux/timekeeping.h:120 [inline]
ktime_get_coarse_ns include/linux/timekeeping.h:126 [inline]
____bpf_ktime_get_coarse_ns kernel/bpf/helpers.c:173 [inline]
bpf_ktime_get_coarse_ns+0x7e/0x130 kernel/bpf/helpers.c:171
bpf_prog_a99735ebafdda2f1+0x10/0xb50
bpf_dispatcher_nop_func include/linux/bpf.h:721 [inline]
__bpf_prog_run include/linux/filter.h:626 [inline]
bpf_prog_run include/linux/filter.h:633 [inline]
BPF_PROG_RUN_ARRAY include/linux/bpf.h:1294 [inline]
trace_call_bpf+0x2cf/0x5d0 kernel/trace/bpf_trace.c:127
perf_trace_run_bpf_submit+0x7b/0x1d0 kernel/events/core.c:9708
perf_trace_lock+0x37c/0x440 include/trace/events/lock.h:39
trace_lock_release+0x128/0x150 include/trace/events/lock.h:58
lock_release+0x82/0x810 kernel/locking/lockdep.c:5636
__raw_spin_unlock_irqrestore include/linux/spinlock_api_smp.h:149 [inline]
_raw_spin_unlock_irqrestore+0x75/0x130 kernel/locking/spinlock.c:194
debug_hrtimer_deactivate kernel/time/hrtimer.c:425 [inline]
debug_deactivate kernel/time/hrtimer.c:481 [inline]
__run_hrtimer kernel/time/hrtimer.c:1653 [inline]
__hrtimer_run_queues+0x2f9/0xa60 kernel/time/hrtimer.c:1749
hrtimer_interrupt+0x3b3/0x1040 kernel/time/hrtimer.c:1811
local_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1086 [inline]
__sysvec_apic_timer_interrupt+0xf9/0x270 arch/x86/kernel/apic/apic.c:1103
sysvec_apic_timer_interrupt+0x8c/0xb0 arch/x86/kernel/apic/apic.c:1097
asm_sysvec_apic_timer_interrupt+0x12/0x20
__raw_spin_unlock_irqrestore include/linux/spinlock_api_smp.h:152 [inline]
_raw_spin_unlock_irqrestore+0xd4/0x130 kernel/locking/spinlock.c:194
try_to_wake_up+0x702/0xd20 kernel/sched/core.c:4118
wake_up_process kernel/sched/core.c:4200 [inline]
wake_up_q+0x9a/0xf0 kernel/sched/core.c:953
futex_wake+0x50f/0x5b0 kernel/futex/waitwake.c:184
do_futex+0x367/0x560 kernel/futex/syscalls.c:127
__do_sys_futex kernel/futex/syscalls.c:199 [inline]
__se_sys_futex+0x401/0x4b0 kernel/futex/syscalls.c:180
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
There is a possible deadlock with bpf_timer_* set of helpers:
hrtimer_start()
lock_base();
trace_hrtimer...()
perf_event()
bpf_run()
bpf_timer_start()
hrtimer_start()
lock_base() <- DEADLOCK
Forbid use of bpf_ktime_get_coarse_ns() and bpf_timer_* helpers in
BPF_PROG_TYPE_KPROBE, BPF_PROG_TYPE_TRACEPOINT, BPF_PROG_TYPE_PERF_EVENT
and BPF_PROG_TYPE_RAW_TRACEPOINT prog types.
Fixes: d05512618056 ("bpf: Add bpf_ktime_get_coarse_ns helper")
Fixes: b00628b1c7d5 ("bpf: Introduce bpf timers.")
Reported-by: [email protected]
Signed-off-by: Dmitrii Banshchikov <[email protected]>
Signed-off-by: Alexei Starovoitov <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/bpf/cgroup.c | 2 ++
kernel/bpf/helpers.c | 2 --
kernel/bpf/verifier.c | 7 +++++++
kernel/trace/bpf_trace.c | 2 --
net/core/filter.c | 6 ++++++
net/ipv4/bpf_tcp_ca.c | 2 ++
6 files changed, 17 insertions(+), 4 deletions(-)
--- a/kernel/bpf/cgroup.c
+++ b/kernel/bpf/cgroup.c
@@ -1773,6 +1773,8 @@ sysctl_func_proto(enum bpf_func_id func_
return &bpf_sysctl_get_new_value_proto;
case BPF_FUNC_sysctl_set_new_value:
return &bpf_sysctl_set_new_value_proto;
+ case BPF_FUNC_ktime_get_coarse_ns:
+ return &bpf_ktime_get_coarse_ns_proto;
default:
return cgroup_base_func_proto(func_id, prog);
}
--- a/kernel/bpf/helpers.c
+++ b/kernel/bpf/helpers.c
@@ -1367,8 +1367,6 @@ bpf_base_func_proto(enum bpf_func_id fun
return &bpf_ktime_get_ns_proto;
case BPF_FUNC_ktime_get_boot_ns:
return &bpf_ktime_get_boot_ns_proto;
- case BPF_FUNC_ktime_get_coarse_ns:
- return &bpf_ktime_get_coarse_ns_proto;
case BPF_FUNC_ringbuf_output:
return &bpf_ringbuf_output_proto;
case BPF_FUNC_ringbuf_reserve:
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -11451,6 +11451,13 @@ static int check_map_prog_compatibility(
}
}
+ if (map_value_has_timer(map)) {
+ if (is_tracing_prog_type(prog_type)) {
+ verbose(env, "tracing progs cannot use bpf_timer yet\n");
+ return -EINVAL;
+ }
+ }
+
if ((bpf_prog_is_dev_bound(prog->aux) || bpf_map_is_dev_bound(map)) &&
!bpf_offload_prog_map_match(prog, map)) {
verbose(env, "offload device mismatch between prog and map\n");
--- a/kernel/trace/bpf_trace.c
+++ b/kernel/trace/bpf_trace.c
@@ -1037,8 +1037,6 @@ bpf_tracing_func_proto(enum bpf_func_id
return &bpf_ktime_get_ns_proto;
case BPF_FUNC_ktime_get_boot_ns:
return &bpf_ktime_get_boot_ns_proto;
- case BPF_FUNC_ktime_get_coarse_ns:
- return &bpf_ktime_get_coarse_ns_proto;
case BPF_FUNC_tail_call:
return &bpf_tail_call_proto;
case BPF_FUNC_get_current_pid_tgid:
--- a/net/core/filter.c
+++ b/net/core/filter.c
@@ -7162,6 +7162,8 @@ sock_filter_func_proto(enum bpf_func_id
#endif
case BPF_FUNC_sk_storage_get:
return &bpf_sk_storage_get_cg_sock_proto;
+ case BPF_FUNC_ktime_get_coarse_ns:
+ return &bpf_ktime_get_coarse_ns_proto;
default:
return bpf_base_func_proto(func_id);
}
@@ -10306,6 +10308,8 @@ sk_reuseport_func_proto(enum bpf_func_id
return &sk_reuseport_load_bytes_relative_proto;
case BPF_FUNC_get_socket_cookie:
return &bpf_get_socket_ptr_cookie_proto;
+ case BPF_FUNC_ktime_get_coarse_ns:
+ return &bpf_ktime_get_coarse_ns_proto;
default:
return bpf_base_func_proto(func_id);
}
@@ -10787,6 +10791,8 @@ bpf_sk_base_func_proto(enum bpf_func_id
case BPF_FUNC_skc_to_udp6_sock:
func = &bpf_skc_to_udp6_sock_proto;
break;
+ case BPF_FUNC_ktime_get_coarse_ns:
+ return &bpf_ktime_get_coarse_ns_proto;
default:
return bpf_base_func_proto(func_id);
}
--- a/net/ipv4/bpf_tcp_ca.c
+++ b/net/ipv4/bpf_tcp_ca.c
@@ -212,6 +212,8 @@ bpf_tcp_ca_get_func_proto(enum bpf_func_
offsetof(struct tcp_congestion_ops, release))
return &bpf_sk_getsockopt_proto;
return NULL;
+ case BPF_FUNC_ktime_get_coarse_ns:
+ return &bpf_ktime_get_coarse_ns_proto;
default:
return bpf_base_func_proto(func_id);
}
From: Lin Ma <[email protected]>
[ Upstream commit 48b71a9e66c2eab60564b1b1c85f4928ed04e406 ]
There are two sites that calls queue_work() after the
destroy_workqueue() and lead to possible UAF.
The first site is nci_send_cmd(), which can happen after the
nci_close_device as below
nfcmrvl_nci_unregister_dev | nfc_genl_dev_up
nci_close_device |
flush_workqueue |
del_timer_sync |
nci_unregister_device | nfc_get_device
destroy_workqueue | nfc_dev_up
nfc_unregister_device | nci_dev_up
device_del | nci_open_device
| __nci_request
| nci_send_cmd
| queue_work !!!
Another site is nci_cmd_timer, awaked by the nci_cmd_work from the
nci_send_cmd.
... | ...
nci_unregister_device | queue_work
destroy_workqueue |
nfc_unregister_device | ...
device_del | nci_cmd_work
| mod_timer
| ...
| nci_cmd_timer
| queue_work !!!
For the above two UAF, the root cause is that the nfc_dev_up can race
between the nci_unregister_device routine. Therefore, this patch
introduce NCI_UNREG flag to easily eliminate the possible race. In
addition, the mutex_lock in nci_close_device can act as a barrier.
Signed-off-by: Lin Ma <[email protected]>
Fixes: 6a2968aaf50c ("NFC: basic NCI protocol implementation")
Reviewed-by: Jakub Kicinski <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/net/nfc/nci_core.h | 1 +
net/nfc/nci/core.c | 19 +++++++++++++++++--
2 files changed, 18 insertions(+), 2 deletions(-)
diff --git a/include/net/nfc/nci_core.h b/include/net/nfc/nci_core.h
index a964daedc17b6..ea8595651c384 100644
--- a/include/net/nfc/nci_core.h
+++ b/include/net/nfc/nci_core.h
@@ -30,6 +30,7 @@ enum nci_flag {
NCI_UP,
NCI_DATA_EXCHANGE,
NCI_DATA_EXCHANGE_TO,
+ NCI_UNREG,
};
/* NCI device states */
diff --git a/net/nfc/nci/core.c b/net/nfc/nci/core.c
index 39994dbb6a55b..e41e2e9e54984 100644
--- a/net/nfc/nci/core.c
+++ b/net/nfc/nci/core.c
@@ -476,6 +476,11 @@ static int nci_open_device(struct nci_dev *ndev)
mutex_lock(&ndev->req_lock);
+ if (test_bit(NCI_UNREG, &ndev->flags)) {
+ rc = -ENODEV;
+ goto done;
+ }
+
if (test_bit(NCI_UP, &ndev->flags)) {
rc = -EALREADY;
goto done;
@@ -548,6 +553,10 @@ done:
static int nci_close_device(struct nci_dev *ndev)
{
nci_req_cancel(ndev, ENODEV);
+
+ /* This mutex needs to be held as a barrier for
+ * caller nci_unregister_device
+ */
mutex_lock(&ndev->req_lock);
if (!test_and_clear_bit(NCI_UP, &ndev->flags)) {
@@ -585,8 +594,8 @@ static int nci_close_device(struct nci_dev *ndev)
del_timer_sync(&ndev->cmd_timer);
- /* Clear flags */
- ndev->flags = 0;
+ /* Clear flags except NCI_UNREG */
+ ndev->flags &= BIT(NCI_UNREG);
mutex_unlock(&ndev->req_lock);
@@ -1273,6 +1282,12 @@ void nci_unregister_device(struct nci_dev *ndev)
{
struct nci_conn_info *conn_info, *n;
+ /* This set_bit is not protected with specialized barrier,
+ * However, it is fine because the mutex_lock(&ndev->req_lock);
+ * in nci_close_device() will help to emit one.
+ */
+ set_bit(NCI_UNREG, &ndev->flags);
+
nci_close_device(ndev);
destroy_workqueue(ndev->cmd_wq);
--
2.33.0
From: Grzegorz Szczurek <[email protected]>
[ Upstream commit 5aff430d4e33a0b48a6b3d5beb06f79da23f9916 ]
Fix misleading display error in dmesg if tc filter return fail.
Only i40e status error code should be converted to string, not linux
error code. Otherwise, we return false information about the error.
Fixes: 2f4b411a3d67 ("i40e: Enable cloud filters via tc-flower")
Signed-off-by: Grzegorz Szczurek <[email protected]>
Signed-off-by: Mateusz Palczewski <[email protected]>
Tested-by: Dave Switzer <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/ethernet/intel/i40e/i40e_main.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 83413999902e5..76d0b809d1340 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -8531,9 +8531,8 @@ static int i40e_configure_clsflower(struct i40e_vsi *vsi,
err = i40e_add_del_cloud_filter(vsi, filter, true);
if (err) {
- dev_err(&pf->pdev->dev,
- "Failed to add cloud filter, err %s\n",
- i40e_stat_str(&pf->hw, err));
+ dev_err(&pf->pdev->dev, "Failed to add cloud filter, err %d\n",
+ err);
goto err;
}
--
2.33.0
From: Karen Sornek <[email protected]>
[ Upstream commit 3a3b311e3881172fc8e019b6508f04bc40c92d9d ]
Restore part of reset functionality used when reset is called
from the VF to reset itself. Without this fix warning message
is displayed when VF is being removed via sysfs.
Fix the crash of the VF during reset by ensuring
that the PF receives the reset message successfully.
Refactor code to use one function instead of two.
Fixes: 5c3c48ac6bf5 ("i40e: implement virtual device interface")
Signed-off-by: Grzegorz Szczurek <[email protected]>
Signed-off-by: Karen Sornek <[email protected]>
Tested-by: Tony Brelinski <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../ethernet/intel/i40e/i40e_virtchnl_pf.c | 53 ++++++++-----------
1 file changed, 21 insertions(+), 32 deletions(-)
diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
index 2102db11972a7..80ae264c99ba0 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
@@ -183,17 +183,18 @@ void i40e_vc_notify_vf_reset(struct i40e_vf *vf)
/***********************misc routines*****************************/
/**
- * i40e_vc_disable_vf
+ * i40e_vc_reset_vf
* @vf: pointer to the VF info
- *
- * Disable the VF through a SW reset.
+ * @notify_vf: notify vf about reset or not
+ * Reset VF handler.
**/
-static inline void i40e_vc_disable_vf(struct i40e_vf *vf)
+static void i40e_vc_reset_vf(struct i40e_vf *vf, bool notify_vf)
{
struct i40e_pf *pf = vf->pf;
int i;
- i40e_vc_notify_vf_reset(vf);
+ if (notify_vf)
+ i40e_vc_notify_vf_reset(vf);
/* We want to ensure that an actual reset occurs initiated after this
* function was called. However, we do not want to wait forever, so
@@ -211,9 +212,14 @@ static inline void i40e_vc_disable_vf(struct i40e_vf *vf)
usleep_range(10000, 20000);
}
- dev_warn(&vf->pf->pdev->dev,
- "Failed to initiate reset for VF %d after 200 milliseconds\n",
- vf->vf_id);
+ if (notify_vf)
+ dev_warn(&vf->pf->pdev->dev,
+ "Failed to initiate reset for VF %d after 200 milliseconds\n",
+ vf->vf_id);
+ else
+ dev_dbg(&vf->pf->pdev->dev,
+ "Failed to initiate reset for VF %d after 200 milliseconds\n",
+ vf->vf_id);
}
/**
@@ -2108,20 +2114,6 @@ err:
return ret;
}
-/**
- * i40e_vc_reset_vf_msg
- * @vf: pointer to the VF info
- *
- * called from the VF to reset itself,
- * unlike other virtchnl messages, PF driver
- * doesn't send the response back to the VF
- **/
-static void i40e_vc_reset_vf_msg(struct i40e_vf *vf)
-{
- if (test_bit(I40E_VF_STATE_ACTIVE, &vf->vf_states))
- i40e_reset_vf(vf, false);
-}
-
/**
* i40e_vc_config_promiscuous_mode_msg
* @vf: pointer to the VF info
@@ -2617,8 +2609,7 @@ static int i40e_vc_request_queues_msg(struct i40e_vf *vf, u8 *msg)
} else {
/* successful request */
vf->num_req_queues = req_pairs;
- i40e_vc_notify_vf_reset(vf);
- i40e_reset_vf(vf, false);
+ i40e_vc_reset_vf(vf, true);
return 0;
}
@@ -3813,8 +3804,7 @@ static int i40e_vc_add_qch_msg(struct i40e_vf *vf, u8 *msg)
vf->num_req_queues = 0;
/* reset the VF in order to allocate resources */
- i40e_vc_notify_vf_reset(vf);
- i40e_reset_vf(vf, false);
+ i40e_vc_reset_vf(vf, true);
return I40E_SUCCESS;
@@ -3854,8 +3844,7 @@ static int i40e_vc_del_qch_msg(struct i40e_vf *vf, u8 *msg)
}
/* reset the VF in order to allocate resources */
- i40e_vc_notify_vf_reset(vf);
- i40e_reset_vf(vf, false);
+ i40e_vc_reset_vf(vf, true);
return I40E_SUCCESS;
@@ -3917,7 +3906,7 @@ int i40e_vc_process_vf_msg(struct i40e_pf *pf, s16 vf_id, u32 v_opcode,
i40e_vc_notify_vf_link_state(vf);
break;
case VIRTCHNL_OP_RESET_VF:
- i40e_vc_reset_vf_msg(vf);
+ i40e_vc_reset_vf(vf, false);
ret = 0;
break;
case VIRTCHNL_OP_CONFIG_PROMISCUOUS_MODE:
@@ -4171,7 +4160,7 @@ int i40e_ndo_set_vf_mac(struct net_device *netdev, int vf_id, u8 *mac)
/* Force the VF interface down so it has to bring up with new MAC
* address
*/
- i40e_vc_disable_vf(vf);
+ i40e_vc_reset_vf(vf, true);
dev_info(&pf->pdev->dev, "Bring down and up the VF interface to make this change effective.\n");
error_param:
@@ -4235,7 +4224,7 @@ int i40e_ndo_set_vf_port_vlan(struct net_device *netdev, int vf_id,
/* duplicate request, so just return success */
goto error_pvid;
- i40e_vc_disable_vf(vf);
+ i40e_vc_reset_vf(vf, true);
/* During reset the VF got a new VSI, so refresh a pointer. */
vsi = pf->vsi[vf->lan_vsi_idx];
/* Locked once because multiple functions below iterate list */
@@ -4613,7 +4602,7 @@ int i40e_ndo_set_vf_trust(struct net_device *netdev, int vf_id, bool setting)
goto out;
vf->trusted = setting;
- i40e_vc_disable_vf(vf);
+ i40e_vc_reset_vf(vf, true);
dev_info(&pf->pdev->dev, "VF %u is now %strusted\n",
vf_id, setting ? "" : "un");
--
2.33.0
On Wed, 24 Nov 2021 12:54:47 +0100, Greg Kroah-Hartman <[email protected]> wrote:
> This is the start of the stable review cycle for the 5.15.5 release.
> There are 279 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri, 26 Nov 2021 11:56:36 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.5-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
5.15.5-rc1 Successfully Compiled and booted on my Raspberry PI 4b (8g) (bcm2711)
Tested-by: Fox Chen <[email protected]>
5.15.5-rc1 Successfully Compiled, booted and suspended on an x86_64
(Intel i5-11400)
thanks
Tested-by: Ronald Warsow <[email protected]>
On Wed, Nov 24, 2021 at 12:54:47PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.15.5 release.
> There are 279 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri, 26 Nov 2021 11:56:36 +0000.
> Anything received after that time might be too late.
>
Build results:
total: 154 pass: 154 fail: 0
Qemu test results:
total: 482 pass: 482 fail: 0
Tested-by: Guenter Roeck <[email protected]>
Guenter
On Wed, 24 Nov 2021 at 18:35, Greg Kroah-Hartman
<[email protected]> wrote:
>
> This is the start of the stable review cycle for the 5.15.5 release.
> There are 279 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri, 26 Nov 2021 11:56:36 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.5-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.
Tested-by: Linux Kernel Functional Testing <[email protected]>
## Build
* kernel: 5.15.5-rc1
* git: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc
* git branch: linux-5.15.y
* git commit: e3bb2e602026d5d841d7a2e62bfbe579265bb5ff
* git describe: v5.15.4-280-ge3bb2e602026
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.15.y/build/v5.15.4-280-ge3bb2e602026
## No regressions (compared to v5.15.3)
## No fixes (compared to v5.15.3)
## Test result summary
total: 97214, pass: 82201, fail: 1196, skip: 13115, xfail: 702
## Build Summary
* arc: 10 total, 10 passed, 0 failed
* arm: 259 total, 259 passed, 0 failed
* arm64: 37 total, 35 passed, 2 failed
* dragonboard-410c: 1 total, 1 passed, 0 failed
* hi6220-hikey: 1 total, 1 passed, 0 failed
* i386: 36 total, 36 passed, 0 failed
* juno-r2: 1 total, 1 passed, 0 failed
* mips: 34 total, 34 passed, 0 failed
* parisc: 12 total, 12 passed, 0 failed
* powerpc: 45 total, 42 passed, 3 failed
* riscv: 24 total, 24 passed, 0 failed
* s390: 18 total, 18 passed, 0 failed
* sh: 20 total, 20 passed, 0 failed
* sparc: 12 total, 12 passed, 0 failed
* x15: 1 total, 1 passed, 0 failed
* x86: 1 total, 1 passed, 0 failed
* x86_64: 37 total, 37 passed, 0 failed
## Test suites summary
* fwts
* igt-gpu-tools
* kselftest-android
* kselftest-arm64
* kselftest-arm64/arm64.btitest.bti_c_func
* kselftest-arm64/arm64.btitest.bti_j_func
* kselftest-arm64/arm64.btitest.bti_jc_func
* kselftest-arm64/arm64.btitest.bti_none_func
* kselftest-arm64/arm64.btitest.nohint_func
* kselftest-arm64/arm64.btitest.paciasp_func
* kselftest-arm64/arm64.nobtitest.bti_c_func
* kselftest-arm64/arm64.nobtitest.bti_j_func
* kselftest-arm64/arm64.nobtitest.bti_jc_func
* kselftest-arm64/arm64.nobtitest.bti_none_func
* kselftest-arm64/arm64.nobtitest.nohint_func
* kselftest-arm64/arm64.nobtitest.paciasp_func
* kselftest-bpf
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-drivers
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-lkdtm
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-net
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-tc-testing
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-x86
* kselftest-zram
* kunit
* kvm-unit-tests
* libgpiod
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* packetdrill
* perf
* perf/Zstd-perf.data-compression
* rcutorture
* ssuite
* v4l2-compliance
--
Linaro LKFT
https://lkft.linaro.org
On Wed, Nov 24, 2021 at 12:54:47PM +0100, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.15.5 release.
> There are 279 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri, 26 Nov 2021 11:56:36 +0000.
> Anything received after that time might be too late.
Hi Greg,
Looking good.
Run tested on:
- Intel Tiger Lake x86_64 (nuc11 i7-1165G7)
In addition build tested on:
- Allwinner A64
- Allwinner H3
- Allwinner H5
- Allwinner H6
- NXP iMX6
- NXP iMX8
- Qualcomm Dragonboard
- Rockchip RK3288
- Rockchip RK3328
- Rockchip RK3399pro
- Samsung Exynos
Tested-by: Rudi Heitbaum <[email protected]>
--
Rudi
On 24/11/2021 11:54, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.15.5 release.
> There are 279 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri, 26 Nov 2021 11:56:36 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.5-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
No new regressions.
Test results for stable-v5.15:
10 builds: 10 pass, 0 fail
28 boots: 28 pass, 0 fail
114 tests: 108 pass, 6 fail
Linux version: 5.15.5-rc1-ge3bb2e602026
Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000,
tegra194-p2972-0000, tegra194-p3509-0000+p3668-0000,
tegra20-ventana, tegra210-p2371-2180,
tegra210-p3450-0000, tegra30-cardhu-a04
Test failures: tegra194-p2972-0000: boot.py
tegra194-p2972-0000: tegra-audio-boot-sanity.sh
tegra194-p2972-0000: tegra-audio-hda-playback.sh
tegra194-p3509-0000+p3668-0000: devices
tegra194-p3509-0000+p3668-0000: tegra-audio-boot-sanity.sh
tegra194-p3509-0000+p3668-0000: tegra-audio-hda-playback.sh
Tested-by: Jon Hunter <[email protected]>
Jon
--
nvpublic