The TQ-Systems MBa6x mainboard can be used with TQMa6 variants with
i.MX6Q/QP/DL SoCs (TQMa6Q/QP/DL). The TQMa6Q and DL exist in two variants:
The newer variants "A" have a hardware workaround for Erratum ERR006687,
while variants "B" are missing such a workaround, so it needs to be
handled in software. The erratum was fixed in i.MX6QP, so no "A" variant
of the TQMa6QP exists.
Signed-off-by: Matthias Schiffer <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
---
v2: no changes, added Reviewed-by from v1
v3: no changes
.../devicetree/bindings/arm/fsl.yaml | 35 +++++++++++++++++++
1 file changed, 35 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index 0b595b26061f..57b003f4eff1 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -323,6 +323,20 @@ properties:
- const: toradex,apalis_imx6q
- const: fsl,imx6q
+ - description: TQ-Systems TQMa6Q SoM (variant A) on MBa6x
+ items:
+ - const: tq,imx6q-mba6x-a
+ - const: tq,mba6a # Expected by bootloader, to be removed in the future
+ - const: tq,imx6q-tqma6q-a
+ - const: fsl,imx6q
+
+ - description: TQ-Systems TQMa6Q SoM (variant B) on MBa6x
+ items:
+ - const: tq,imx6q-mba6x-b
+ - const: tq,mba6b # Expected by bootloader, to be removed in the future
+ - const: tq,imx6q-tqma6q-b
+ - const: fsl,imx6q
+
- description: i.MX6QP based Boards
items:
- enum:
@@ -344,6 +358,13 @@ properties:
- const: phytec,imx6qdl-pcm058 # PHYTEC phyCORE-i.MX6
- const: fsl,imx6qp
+ - description: TQ-Systems TQMa6QP SoM on MBa6x
+ items:
+ - const: tq,imx6qp-mba6x-b
+ - const: tq,mba6b # Expected by bootloader, to be removed in the future
+ - const: tq,imx6qp-tqma6qp-b
+ - const: fsl,imx6qp
+
- description: i.MX6DL based Boards
items:
- enum:
@@ -482,6 +503,20 @@ properties:
- const: dh,imx6s-dhcom-som
- const: fsl,imx6dl
+ - description: TQ-Systems TQMa6DL SoM (variant A) on MBa6x
+ items:
+ - const: tq,imx6dl-mba6x-a
+ - const: tq,mba6a # Expected by bootloader, to be removed in the future
+ - const: tq,imx6dl-tqma6dl-a
+ - const: fsl,imx6dl
+
+ - description: TQ-Systems TQMa6DL SoM (variant B) on MBa6x
+ items:
+ - const: tq,imx6dl-mba6x-b
+ - const: tq,mba6b # Expected by bootloader, to be removed in the future
+ - const: tq,imx6dl-tqma6dl-b
+ - const: fsl,imx6dl
+
- description: i.MX6SL based Boards
items:
- enum:
--
2.17.1
The TQMa6x "a" has a workaround for ERR006687 implemented in hardware.
Add the required pinmuxing and related setup to make use of this.
As board DTS files based on the TQMa6x SoMs will define their own
pinmuxing for the FEC ethernet controller as well, we can't apply this
pin group unconditionally; instead, it is the responsibility of the
board DTs derived from imx6qdl-tqma6a.dtsi to include this group.
Signed-off-by: Matthias Schiffer <[email protected]>
---
v2: no changes
v3: changed commit title
arch/arm/boot/dts/imx6qdl-tqma6a.dtsi | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/arch/arm/boot/dts/imx6qdl-tqma6a.dtsi b/arch/arm/boot/dts/imx6qdl-tqma6a.dtsi
index b679bec78e6c..bfb67da64b96 100644
--- a/arch/arm/boot/dts/imx6qdl-tqma6a.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-tqma6a.dtsi
@@ -4,6 +4,12 @@
* Copyright 2013-2017 Markus Niebel <[email protected]>
*/
+&fec {
+ interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+ <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+ fsl,err006687-workaround-present;
+};
+
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
@@ -26,3 +32,17 @@
pagesize = <32>;
};
};
+
+&iomuxc {
+ /*
+ * This pinmuxing is required for the ERR006687 workaround. Board
+ * DTS files that enable the FEC controller with
+ * fsl,err006687-workaround-present must include this group.
+ */
+ pinctrl_enet_fix: enetfixgrp {
+ fsl,pins = <
+ /* ENET ping patch */
+ MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1
+ >;
+ };
+};
--
2.17.1
From: Markus Niebel <[email protected]>
Add device trees for the MBa6x mainboard with TQMa6Q/QP/DL SoMs.
As discussed, all new files are added with GPL-2.0-only license, as they
are too tightly intertwined with the SoC DTSIs imx6dl.dtsi and imx6q.dtsi,
which are GPL-2.0.
Signed-off-by: Markus Niebel <[email protected]>
Signed-off-by: Matthias Schiffer <[email protected]>
---
v2: changed SPDX-License-Identifier of new files to GPL-2.0-only as
suggested by Rob Herring.
v3: applied minor fixes suggested by Shawn Guo
arch/arm/boot/dts/Makefile | 5 +
arch/arm/boot/dts/imx6dl-mba6.dtsi | 22 ++
arch/arm/boot/dts/imx6dl-mba6a.dts | 21 ++
arch/arm/boot/dts/imx6dl-mba6b.dts | 21 ++
arch/arm/boot/dts/imx6q-mba6.dtsi | 44 +++
arch/arm/boot/dts/imx6q-mba6a.dts | 20 +
arch/arm/boot/dts/imx6q-mba6b.dts | 20 +
arch/arm/boot/dts/imx6qdl-mba6.dtsi | 526 +++++++++++++++++++++++++++
arch/arm/boot/dts/imx6qdl-mba6a.dtsi | 36 ++
arch/arm/boot/dts/imx6qdl-mba6b.dtsi | 52 +++
arch/arm/boot/dts/imx6qp-mba6b.dts | 18 +
11 files changed, 785 insertions(+)
create mode 100644 arch/arm/boot/dts/imx6dl-mba6.dtsi
create mode 100644 arch/arm/boot/dts/imx6dl-mba6a.dts
create mode 100644 arch/arm/boot/dts/imx6dl-mba6b.dts
create mode 100644 arch/arm/boot/dts/imx6q-mba6.dtsi
create mode 100644 arch/arm/boot/dts/imx6q-mba6a.dts
create mode 100644 arch/arm/boot/dts/imx6q-mba6b.dts
create mode 100644 arch/arm/boot/dts/imx6qdl-mba6.dtsi
create mode 100644 arch/arm/boot/dts/imx6qdl-mba6a.dtsi
create mode 100644 arch/arm/boot/dts/imx6qdl-mba6b.dtsi
create mode 100644 arch/arm/boot/dts/imx6qp-mba6b.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 0de64f237cd8..ef7a8054ef35 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -483,6 +483,8 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6dl-icore-rqs.dtb \
imx6dl-lanmcu.dtb \
imx6dl-mamoj.dtb \
+ imx6dl-mba6a.dtb \
+ imx6dl-mba6b.dtb \
imx6dl-nit6xlite.dtb \
imx6dl-nitrogen6x.dtb \
imx6dl-phytec-mira-rdk-nand.dtb \
@@ -584,6 +586,8 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6q-kp-tpc.dtb \
imx6q-logicpd.dtb \
imx6q-marsboard.dtb \
+ imx6q-mba6a.dtb \
+ imx6q-mba6b.dtb \
imx6q-mccmon6.dtb \
imx6q-nitrogen6x.dtb \
imx6q-nitrogen6_max.dtb \
@@ -629,6 +633,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6q-wandboard-revb1.dtb \
imx6q-wandboard-revd1.dtb \
imx6q-zii-rdu2.dtb \
+ imx6qp-mba6b.dtb \
imx6qp-nitrogen6_max.dtb \
imx6qp-nitrogen6_som2.dtb \
imx6qp-phytec-mira-rdk-nand.dtb \
diff --git a/arch/arm/boot/dts/imx6dl-mba6.dtsi b/arch/arm/boot/dts/imx6dl-mba6.dtsi
new file mode 100644
index 000000000000..b749b424bbd6
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-mba6.dtsi
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ *
+ * Copyright 2013-2021 TQ-Systems GmbH
+ * Author: Markus Niebel <[email protected]>
+ */
+
+ðphy {
+ rxdv-skew-ps = <180>;
+ txen-skew-ps = <0>;
+ rxd3-skew-ps = <180>;
+ rxd2-skew-ps = <180>;
+ rxd1-skew-ps = <180>;
+ rxd0-skew-ps = <180>;
+ txd3-skew-ps = <120>;
+ txd2-skew-ps = <0>;
+ txd1-skew-ps = <300>;
+ txd0-skew-ps = <120>;
+ txc-skew-ps = <1860>;
+ rxc-skew-ps = <1860>;
+};
diff --git a/arch/arm/boot/dts/imx6dl-mba6a.dts b/arch/arm/boot/dts/imx6dl-mba6a.dts
new file mode 100644
index 000000000000..df0a96b28af0
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-mba6a.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ *
+ * Copyright 2013-2021 TQ-Systems GmbH
+ * Author: Markus Niebel <[email protected]>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "imx6dl-tqma6a.dtsi"
+#include "imx6qdl-mba6.dtsi"
+#include "imx6qdl-mba6a.dtsi"
+#include "imx6dl-mba6.dtsi"
+
+/ {
+ model = "TQ TQMa6S/DL on MBa6x";
+ compatible = "tq,imx6dl-mba6x-a", "tq,mba6a",
+ "tq,imx6dl-tqma6dl-a", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-mba6b.dts b/arch/arm/boot/dts/imx6dl-mba6b.dts
new file mode 100644
index 000000000000..610b19d2db0f
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-mba6b.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ *
+ * Copyright 2013-2021 TQ-Systems GmbH
+ * Author: Markus Niebel <[email protected]>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "imx6dl-tqma6b.dtsi"
+#include "imx6qdl-mba6.dtsi"
+#include "imx6qdl-mba6b.dtsi"
+#include "imx6dl-mba6.dtsi"
+
+/ {
+ model = "TQ TQMa6S/DL on MBa6x";
+ compatible = "tq,imx6dl-mba6x-b", "tq,mba6b",
+ "tq,imx6dl-tqma6dl-b", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6q-mba6.dtsi b/arch/arm/boot/dts/imx6q-mba6.dtsi
new file mode 100644
index 000000000000..0d7be4567291
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-mba6.dtsi
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ *
+ * Copyright 2013-2021 TQ-Systems GmbH
+ * Author: Markus Niebel <[email protected]>
+ */
+
+&ecspi5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi5_mba6x>;
+ cs-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+};
+
+ðphy {
+ rxdv-skew-ps = <180>;
+ txen-skew-ps = <120>;
+ rxd3-skew-ps = <180>;
+ rxd2-skew-ps = <180>;
+ rxd1-skew-ps = <180>;
+ rxd0-skew-ps = <180>;
+ txd3-skew-ps = <120>;
+ txd2-skew-ps = <0>;
+ txd1-skew-ps = <180>;
+ txd0-skew-ps = <360>;
+ txc-skew-ps = <1860>;
+ rxc-skew-ps = <1860>;
+};
+
+&sata {
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_ecspi5_mba6x: ecspi5grp-mba6x {
+ fsl,pins = <
+ /* HYS, SPEED = MED, 100k up, DSE = 011, SRE_FAST */
+ MX6QDL_PAD_SD1_DAT0__ECSPI5_MISO 0x1b099
+ MX6QDL_PAD_SD1_CMD__ECSPI5_MOSI 0xb099
+ MX6QDL_PAD_SD1_CLK__ECSPI5_SCLK 0xb099
+ MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0xb099 /* eCSPI5 SS0 */
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6q-mba6a.dts b/arch/arm/boot/dts/imx6q-mba6a.dts
new file mode 100644
index 000000000000..349a08605a5e
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-mba6a.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ *
+ * Copyright 2013-2021 TQ-Systems GmbH
+ * Author: Markus Niebel <[email protected]>
+ */
+
+/dts-v1/;
+
+#include "imx6q-tqma6a.dtsi"
+#include "imx6qdl-mba6.dtsi"
+#include "imx6qdl-mba6a.dtsi"
+#include "imx6q-mba6.dtsi"
+
+/ {
+ model = "TQ TQMa6Q on MBa6x";
+ compatible = "tq,imx6q-mba6x-a", "tq,mba6a",
+ "tq,imx6q-tqma6q-a", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/imx6q-mba6b.dts b/arch/arm/boot/dts/imx6q-mba6b.dts
new file mode 100644
index 000000000000..02c9f3e91b8f
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-mba6b.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ *
+ * Copyright 2013-2021 TQ-Systems GmbH
+ * Author: Markus Niebel <[email protected]>
+ */
+
+/dts-v1/;
+
+#include "imx6q-tqma6b.dtsi"
+#include "imx6qdl-mba6.dtsi"
+#include "imx6qdl-mba6b.dtsi"
+#include "imx6q-mba6.dtsi"
+
+/ {
+ model = "TQ TQMa6Q on MBa6x";
+ compatible = "tq,imx6q-mba6x-b", "tq,mba6b",
+ "tq,imx6q-tqma6q-b", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-mba6.dtsi b/arch/arm/boot/dts/imx6qdl-mba6.dtsi
new file mode 100644
index 000000000000..daf76345b179
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-mba6.dtsi
@@ -0,0 +1,526 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ *
+ * Copyright 2013-2021 TQ-Systems GmbH
+ * Author: Markus Niebel <[email protected]>
+ */
+
+#include <dt-bindings/clock/imx6qdl-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
+/ {
+ aliases {
+ mmc0 = &usdhc3;
+ mmc1 = &usdhc2;
+ /delete-property/ mmc2;
+ /delete-property/ mmc3;
+ };
+
+ chosen {
+ stdout-path = &uart2;
+ };
+
+ beeper: gpio-beeper {
+ compatible = "gpio-beeper";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpiobeeper>;
+ gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
+ };
+
+ gpio_buttons: gpio-buttons {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpiobuttons>;
+
+ button1 {
+ label = "s6";
+ linux,code = <KEY_F6>;
+ gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
+ };
+
+ button2 {
+ label = "s7";
+ linux,code = <KEY_F7>;
+ gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
+ };
+
+ button3 {
+ label = "s8";
+ linux,code = <KEY_F8>;
+ gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpioled>;
+
+ led1 {
+ label = "led1";
+ gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-on";
+ };
+
+ led2 {
+ label = "led2";
+ gpios = <&gpio6 31 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ reg_mba6_3p3v: regulator-mba6-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "supply-mba6-3p3v";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_pcie: regulator-pcie {
+ compatible = "regulator-fixed";
+ regulator-name = "supply-pcie";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ /* PCIE.PWR_EN */
+ gpio = <&gpio2 0 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-always-on;
+ vin-supply = <®_mba6_3p3v>;
+ };
+
+ reg_vcc3v3_audio: regulator-vcc3v3-audio {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3-audio";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <®_mba6_3p3v>;
+ };
+
+ sound {
+ compatible = "fsl,imx-audio-tlv320aic32x4";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux>;
+ model = "imx-audio-tlv320aic32x4";
+ ssi-controller = <&ssi1>;
+ audio-codec = <&tlv320aic32x4>;
+ audio-asrc = <&asrc>;
+ audio-routing =
+ "IN3_L", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "IN1_L", "Line In Jack",
+ "IN1_R", "Line In Jack",
+ "Line Out Jack", "LOL",
+ "Line Out Jack", "LOR";
+ mux-int-port = <1>;
+ mux-ext-port = <3>;
+ };
+};
+
+&audmux {
+ status = "okay";
+
+ ssi0 {
+ fsl,audmux-port = <MX31_AUDMUX_PORT1_SSI0>;
+ fsl,port-config = <
+ (IMX_AUDMUX_V2_PTCR_SYN |
+ IMX_AUDMUX_V2_PTCR_TFSDIR |
+ IMX_AUDMUX_V2_PTCR_TFSEL(MX31_AUDMUX_PORT3_SSI_PINS_3) |
+ IMX_AUDMUX_V2_PTCR_TCLKDIR |
+ IMX_AUDMUX_V2_PTCR_TCSEL(MX31_AUDMUX_PORT3_SSI_PINS_3))
+ IMX_AUDMUX_V2_PDCR_RXDSEL(MX31_AUDMUX_PORT3_SSI_PINS_3)
+ >;
+ };
+
+ aud3 {
+ fsl,audmux-port = <MX31_AUDMUX_PORT3_SSI_PINS_3>;
+ fsl,port-config = <
+ IMX_AUDMUX_V2_PTCR_SYN
+ IMX_AUDMUX_V2_PDCR_RXDSEL(MX31_AUDMUX_PORT1_SSI0)
+ >;
+ };
+};
+
+&can1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can1>;
+ status = "okay";
+};
+
+&can2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can2>;
+ status = "okay";
+};
+
+&ecspi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1>, <&pinctrl_ecspi1_mba6>;
+ cs-gpios = <&gpio3 19 0>, <&gpio3 24 0>;
+};
+
+&fec {
+ phy-mode = "rgmii-id";
+ phy-handle = <ðphy>;
+ mac-address = [00 00 00 00 00 00];
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy: ethernet-phy@3 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <3>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <1000>;
+ reset-deassert-us = <100000>;
+ micrel,force-master;
+ max-speed = <1000>;
+ };
+ };
+};
+
+&i2c1 {
+ tlv320aic32x4: audio-codec@18 {
+ compatible = "ti,tlv320aic32x4";
+ reg = <0x18>;
+ clocks = <&clks IMX6QDL_CLK_CKO>;
+ clock-names = "mclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_codec>;
+ ldoin-supply = <®_vcc3v3_audio>;
+ iov-supply = <®_mba6_3p3v>;
+ };
+};
+
+&pcie {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie>;
+ reset-gpio = <&gpio6 7 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1>;
+ status = "okay";
+};
+
+&pwm3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm3>;
+ status = "okay";
+};
+
+&pwm4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm4>;
+ status = "okay";
+};
+
+&snvs_poweroff {
+ status = "okay";
+};
+
+&ssi1 {
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ uart-has-rtscts;
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4>;
+ uart-has-rtscts;
+ linux,rs485-enabled-at-boot-time;
+ rs485-rts-active-low;
+ rs485-rx-during-tx;
+ status = "okay";
+};
+
+&uart5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart5>;
+ uart-has-rtscts;
+ status = "okay";
+};
+
+&usbh1 {
+ disable-over-current;
+ status = "okay";
+};
+
+&usbotg {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg>;
+ power-active-high;
+ over-current-active-low;
+ srp-disable;
+ hnp-disable;
+ adp-disable;
+ dr_mode = "otg";
+ status = "okay";
+};
+
+/* SD card slot */
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ vmmc-supply = <®_mba6_3p3v>;
+ bus-width = <4>;
+ no-1-8-v;
+ no-mmc;
+ no-sdio;
+ cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&wdog1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdog1>;
+ /* does not work on unmodified starter kit */
+ /* fsl,ext-reset-output; */
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ pinctrl_audmux: audmuxgrp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x1b0b0
+ >;
+ };
+
+ pinctrl_can1: can1grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0xb099
+ MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0xb099
+ >;
+ };
+
+ pinctrl_can2: can2grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0xb099
+ MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0xb099
+ >;
+ };
+
+ pinctrl_codec: codecgrp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1 0xb0 /* CLK */
+ >;
+ };
+
+ pinctrl_ecspi1_mba6: ecspimba6grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D24__GPIO3_IO24 0xb099 /* eCSPI1 SS2 */
+ >;
+ };
+
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ /* FEC phy IRQ */
+ MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x00011008
+ /* FEC phy reset */
+ MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b099
+ /* DSE = 100, 100k up, SPEED = MED */
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0xb0a0
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0xb0a0
+ /* DSE = 111, pull 100k up */
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0xb038
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0xb038
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0xb038
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0xb038
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0xb038
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0xb038
+ /* DSE = 111, pull external */
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x0038
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x0038
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x0038
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x0038
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x0038
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x0038
+ /* HYS = 1, DSE = 111, 100k up, SPEED = HIGH */
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0f0
+ >;
+ };
+
+ pinctrl_gpiobeeper: gpiobeepergrp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT3__GPIO1_IO21 0xb099
+ >;
+ };
+
+ pinctrl_gpiobuttons: gpiobuttongrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x0001b099
+ MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x0001b099
+ MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b099
+ >;
+ };
+
+ pinctrl_gpioled: gpioledgrp {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0xb099 /* LED V15 */
+ MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0xb099 /* LED V16 */
+ >;
+ };
+
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ /* LCD.CONTRAST -> Rev 0100 only, not used on Rev.0200*/
+ MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x0001b099
+
+ MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x0001b099
+ MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x0001b099
+ MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x0001b099
+
+ MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x0001b099
+ MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x0001b099
+ MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x0001b099
+ MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x0001b099
+ MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x0001b099
+ MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x0001b099
+ MX6QDL_PAD_EIM_OE__GPIO2_IO25 0x0001b099
+
+ MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x0001b099
+ MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x0001b099
+ MX6QDL_PAD_EIM_D27__GPIO3_IO27 0x0001b099
+ MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x0001b099
+ MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x0001b099
+
+ MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x0001b099
+ MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x0001b099
+ MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x0001b099
+ MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x0001b099
+
+ MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x0001b099
+ MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x0001b099
+ MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x0001b099
+
+ MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x0001b099
+ MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x0001b099
+ >;
+ };
+
+ pinctrl_pcie: pciegrp {
+ fsl,pins = <
+ /* HYS = 1, DSE = 110, 100k up, SPEED = HIGH (11)*/
+ MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x001b0f0 /* #PCIE.WAKE */
+ MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x001b0f0 /* #PCIE.RST */
+ MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x001b0f0 /* #PCIE.DIS */
+ /* HYS = 1, DSE = 110, PUE+PKE, SPEED = HIGH (11)*/
+ MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x00130f0 /* PCIE.PWR_EN */
+ >;
+ };
+
+ pinctrl_pwm1: pwm1grp {
+ fsl,pins = <
+ /* 100 k PD, DSE 120 OHM, SPPEED LO */
+ MX6QDL_PAD_GPIO_9__PWM1_OUT 0x00003050
+ >;
+ };
+
+ pinctrl_pwm3: pwm3grp {
+ fsl,pins = <
+ /* 100 k PD, DSE 120 OHM, SPPEED LO */
+ MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x00003050
+ >;
+ };
+
+ pinctrl_pwm4: pwm4grp {
+ fsl,pins = <
+ /* 100 k PD, DSE 120 OHM, SPPEED LO */
+ MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x00003050
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b099
+ MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b099
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_CLK__UART3_RX_DATA 0x1b0b1
+ MX6QDL_PAD_SD4_CMD__UART3_TX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D30__UART3_CTS_B 0x1b0b1
+ MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart4: uart4grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart5: uart5grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT18__UART5_RTS_B 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT19__UART5_CTS_B 0x1b0b1
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ /* CLK: 47k Pup SPD_LOW DSE 40Ohm SRE_FAST HYS */
+ MX6QDL_PAD_SD2_CLK__SD2_CLK 0x00017071
+ /* SD2: 47k Pup SPD_LOW DSE 80Ohm SRE_FAST HYS */
+ MX6QDL_PAD_SD2_CMD__SD2_CMD 0x00017059
+ MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x00017059
+ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x00017059
+ MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x00017059
+ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x00017059
+
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x0001b099 /* usdhc2 CD */
+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x0001b099 /* usdhc2 WP */
+ >;
+ };
+
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x0001b0b0
+ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x00017059
+ MX6QDL_PAD_EIM_D22__USB_OTG_PWR 0x0001b099
+ >;
+ };
+
+ pinctrl_wdog1: wdog1grp {
+ fsl,pins = <
+ /* Watchdog out */
+ MX6QDL_PAD_SD1_DAT2__WDOG1_B 0x0000b099
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6qdl-mba6a.dtsi b/arch/arm/boot/dts/imx6qdl-mba6a.dtsi
new file mode 100644
index 000000000000..a61f2705a340
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-mba6a.dtsi
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ *
+ * Copyright 2013-2021 TQ-Systems GmbH
+ * Author: Markus Niebel <[email protected]>
+ */
+
+/ {
+ aliases {
+ rtc0 = &rtc0;
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>, <&pinctrl_enet_fix>;
+};
+
+&i2c1 {
+ lm75: temperature-sensor@49 {
+ compatible = "national,lm75";
+ reg = <0x49>;
+ };
+
+ m24c64_57: eeprom@57 {
+ compatible = "atmel,24c64";
+ reg = <0x57>;
+ pagesize = <32>;
+ };
+
+ rtc0: rtc@68 {
+ compatible = "dallas,ds1339";
+ reg = <0x68>;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6qdl-mba6b.dtsi b/arch/arm/boot/dts/imx6qdl-mba6b.dtsi
new file mode 100644
index 000000000000..9f9f7037c9e4
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-mba6b.dtsi
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ *
+ * Copyright 2013-2021 TQ-Systems GmbH
+ * Author: Markus Niebel <[email protected]>
+ */
+
+/ {
+ aliases {
+ rtc0 = &rtc0;
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+};
+
+&i2c3 {
+ lm75: temperature-sensor@49 {
+ compatible = "national,lm75";
+ reg = <0x49>;
+ };
+
+ m24c64_57: eeprom@57 {
+ compatible = "atmel,24c64";
+ reg = <0x57>;
+ pagesize = <32>;
+ };
+
+ rtc0: rtc@68 {
+ compatible = "dallas,ds1339";
+ reg = <0x68>;
+ };
+};
+
+&iomuxc {
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b899
+ MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b899
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6qp-mba6b.dts b/arch/arm/boot/dts/imx6qp-mba6b.dts
new file mode 100644
index 000000000000..eee2e09d6e94
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qp-mba6b.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2015-2021 TQ-Systems GmbH
+ * Author: Markus Niebel <[email protected]>
+ */
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "imx6qp-tqma6b.dtsi"
+#include "imx6qdl-mba6.dtsi"
+#include "imx6qdl-mba6b.dtsi"
+#include "imx6q-mba6.dtsi"
+
+/ {
+ model = "TQ TQMa6QP on MBa6x";
+ compatible = "tq,imx6qp-mba6x-b", "tq,mba6b",
+ "tq,imx6qp-tqma6qp-b", "fsl,imx6qp";
+};
--
2.17.1
On Mon, Nov 22, 2021 at 12:37:38PM +0100, Matthias Schiffer wrote:
> The TQ-Systems MBa6x mainboard can be used with TQMa6 variants with
> i.MX6Q/QP/DL SoCs (TQMa6Q/QP/DL). The TQMa6Q and DL exist in two variants:
> The newer variants "A" have a hardware workaround for Erratum ERR006687,
> while variants "B" are missing such a workaround, so it needs to be
> handled in software. The erratum was fixed in i.MX6QP, so no "A" variant
> of the TQMa6QP exists.
>
> Signed-off-by: Matthias Schiffer <[email protected]>
> Reviewed-by: Rob Herring <[email protected]>
Applied all, thanks!