2021-12-12 18:07:09

by Ajit Kumar Pandey

Subject: [PATCH v5 4/5] clk: x86: Use dynamic con_id string during clk registration

Replace hard coded con_id string with fch_data->name. We have clk
consumers looking up with different clock names, hence use dynamic
con_id string during clk lookup registration. fch_data->name will
be initialized in acpi driver based on fmw property value.

Signed-off-by: Ajit Kumar Pandey <[email protected]>
Reviewed-by: Mario Limonciello <[email protected]>
---
drivers/clk/x86/clk-fch.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/x86/clk-fch.c b/drivers/clk/x86/clk-fch.c
index 6a726420bfcb..d41d519b9c2b 100644
--- a/drivers/clk/x86/clk-fch.c
+++ b/drivers/clk/x86/clk-fch.c
@@ -75,7 +75,7 @@ static int fch_clk_probe(struct platform_device *pdev)
OSCCLKENB, CLK_GATE_SET_TO_DISABLE, NULL);

devm_clk_hw_register_clkdev(&pdev->dev, hws[ST_CLK_GATE],
- "oscout1", NULL);
+ fch_data->name, NULL);
} else {
hws[CLK_48M_FIXED] = clk_hw_register_fixed_rate(NULL, "clk48MHz",
NULL, 0, 48000000);
@@ -85,7 +85,7 @@ static int fch_clk_probe(struct platform_device *pdev)
OSCCLKENB, CLK_GATE_SET_TO_DISABLE, NULL);

devm_clk_hw_register_clkdev(&pdev->dev, hws[CLK_GATE_FIXED],
- "oscout1", NULL);
+ fch_data->name, NULL);
}

pci_dev_put(rdev);
--
2.25.1

2022-01-07 01:59:20

by Stephen Boyd

Subject: Re: [PATCH v5 4/5] clk: x86: Use dynamic con_id string during clk registration

Quoting Ajit Kumar Pandey (2021-12-12 10:05:26)
> Replace hard coded con_id string with fch_data->name. We have clk
> consumers looking up with different clock names, hence use dynamic
> con_id string during clk lookup registration. fch_data->name will
> be initialized in acpi driver based on fmw property value.
>
> Signed-off-by: Ajit Kumar Pandey <[email protected]>
> Reviewed-by: Mario Limonciello <[email protected]>
> ---

Applied to clk-next