This uses the MediaTek MT7622 PCIe driver, since the PCIe IP block is nearly
identical to the one in MT7622
Signed-off-by: Felix Fietkau <[email protected]>
---
arch/arm/boot/dts/en7523-evb.dts | 8 +++++
arch/arm/boot/dts/en7523.dtsi | 60 ++++++++++++++++++++++++++++++++
2 files changed, 68 insertions(+)
diff --git a/arch/arm/boot/dts/en7523-evb.dts b/arch/arm/boot/dts/en7523-evb.dts
index 69754ef9a628..0a79f5f6c311 100644
--- a/arch/arm/boot/dts/en7523-evb.dts
+++ b/arch/arm/boot/dts/en7523-evb.dts
@@ -25,3 +25,11 @@ memory@80000000 {
reg = <0x80000000 0x20000000>;
};
};
+
+&pcie0 {
+ status = "okay";
+};
+
+&pcie1 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/en7523.dtsi b/arch/arm/boot/dts/en7523.dtsi
index 0148958c607b..862da104d6f2 100644
--- a/arch/arm/boot/dts/en7523.dtsi
+++ b/arch/arm/boot/dts/en7523.dtsi
@@ -119,4 +119,64 @@ uart1: serial@1fbf0000 {
clock-frequency = <1843200>;
status = "okay";
};
+
+
+ pcie0: pcie@1fa91000 {
+ compatible = "airoha,en7523-pcie", "mediatek,mt7622-pcie";
+ device_type = "pci";
+ reg = <0x1fa91000 0x1000>;
+ reg-names = "port0";
+ linux,pci-domain = <0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "pcie_irq";
+ clocks = <&scu EN7523_CLK_PCIE>;
+ clock-names = "sys_ck0";
+ bus-range = <0x00 0xff>;
+ ranges = <0x82000000 0 0x20000000 0x20000000 0 0x8000000>;
+ status = "disabled";
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie_intc0 0>,
+ <0 0 0 2 &pcie_intc0 1>,
+ <0 0 0 3 &pcie_intc0 2>,
+ <0 0 0 4 &pcie_intc0 3>;
+ pcie_intc0: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ pcie1: pcie@1fa92000 {
+ compatible = "airoha,en7523-pcie", "mediatek,mt7622-pcie";
+ device_type = "pci";
+ reg = <0x1fa92000 0x1000>;
+ reg-names = "port1";
+ linux,pci-domain = <1>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "pcie_irq";
+ clocks = <&scu EN7523_CLK_PCIE>;
+ clock-names = "sys_ck1";
+ bus-range = <0x00 0xff>;
+ ranges = <0x82000000 0 0x28000000 0x28000000 0 0x8000000>;
+ status = "disabled";
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie_intc1 0>,
+ <0 0 0 2 &pcie_intc1 1>,
+ <0 0 0 3 &pcie_intc1 2>,
+ <0 0 0 4 &pcie_intc1 3>;
+ pcie_intc1: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+ };
+
};
--
2.34.1