2021-12-24 19:54:00

by David Heidelberg

[permalink] [raw]
Subject: [PATCH] dt-bindings: display: enable port jdi,lt070me05000

Enable port inside panel bindings.

Fixes warnings generated by `make qcom-apq8064-asus-nexus7-flo.dtb` as:
arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dt.yaml: panel@0: 'port' does not match any of the regexes: 'pinctrl-[0-9]+'
From schema: Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml

Signed-off-by: David Heidelberg <[email protected]>
---
.../devicetree/bindings/display/panel/jdi,lt070me05000.yaml | 2 ++
1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml
index 4f92365e888a..63c82a4378ff 100644
--- a/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml
+++ b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml
@@ -35,6 +35,8 @@ properties:
phandle of the gpio for power ic line
Power IC supply enable, High active

+ port: true
+
required:
- compatible
- reg
--
2.34.1



2022-01-04 20:59:57

by Rob Herring (Arm)

[permalink] [raw]
Subject: Re: [PATCH] dt-bindings: display: enable port jdi,lt070me05000

On Fri, 24 Dec 2021 20:53:54 +0100, David Heidelberg wrote:
> Enable port inside panel bindings.
>
> Fixes warnings generated by `make qcom-apq8064-asus-nexus7-flo.dtb` as:
> arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dt.yaml: panel@0: 'port' does not match any of the regexes: 'pinctrl-[0-9]+'
> From schema: Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml
>
> Signed-off-by: David Heidelberg <[email protected]>
> ---
> .../devicetree/bindings/display/panel/jdi,lt070me05000.yaml | 2 ++
> 1 file changed, 2 insertions(+)
>

Applied, thanks!