Because of the possible failure of the consumer, the
regulator_bulk_enable() may return error.
Therefore, it should be better to check the return value of the
lis3_reg_ctrl() and return error if fails.
Fixes: ec400c9fab99 ("lis3lv02d: make regulator API usage unconditional")
Signed-off-by: Jiasheng Jiang <[email protected]>
---
drivers/misc/lis3lv02d/lis3lv02d_i2c.c | 14 +++++++++++---
1 file changed, 11 insertions(+), 3 deletions(-)
diff --git a/drivers/misc/lis3lv02d/lis3lv02d_i2c.c b/drivers/misc/lis3lv02d/lis3lv02d_i2c.c
index 4001e3c0a167..4fe5ff8cacb8 100644
--- a/drivers/misc/lis3lv02d/lis3lv02d_i2c.c
+++ b/drivers/misc/lis3lv02d/lis3lv02d_i2c.c
@@ -105,7 +105,7 @@ MODULE_DEVICE_TABLE(of, lis3lv02d_i2c_dt_ids);
static int lis3lv02d_i2c_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
- int ret = 0;
+ int ret = 0, err;
struct lis3lv02d_platform_data *pdata = client->dev.platform_data;
#ifdef CONFIG_OF
@@ -160,11 +160,19 @@ static int lis3lv02d_i2c_probe(struct i2c_client *client,
i2c_set_clientdata(client, &lis3_dev);
/* Provide power over the init call */
- lis3_reg_ctrl(&lis3_dev, LIS3_REG_ON);
+ err = lis3_reg_ctrl(&lis3_dev, LIS3_REG_ON);
+ if (err) {
+ ret = err;
+ goto fail2;
+ }
ret = lis3lv02d_init_device(&lis3_dev);
- lis3_reg_ctrl(&lis3_dev, LIS3_REG_OFF);
+ err = lis3_reg_ctrl(&lis3_dev, LIS3_REG_OFF);
+ if (err) {
+ ret = err;
+ goto fail2;
+ }
if (ret)
goto fail2;
--
2.25.1