The backtrace of current CPU also should be printed as it is active. This
change add stack trace for current CPU and print a hint for idle CPU for
the generic workqueue based printing. (x86 already does this)
Now it looks like below:
[ 279.401567] sysrq: Show backtrace of all active CPUs
[ 279.407234] sysrq: CPU5:
[ 279.407505] Call Trace:
[ 279.408789] [<ffffffff8000606c>] dump_backtrace+0x2c/0x3a
[ 279.411698] [<ffffffff800060ac>] show_stack+0x32/0x3e
[ 279.411809] [<ffffffff80542258>] sysrq_handle_showallcpus+0x4c/0xc6
[ 279.411929] [<ffffffff80542f16>] __handle_sysrq+0x106/0x26c
[ 279.412034] [<ffffffff805436a8>] write_sysrq_trigger+0x64/0x74
[ 279.412139] [<ffffffff8029cd48>] proc_reg_write+0x8e/0xe2
[ 279.412252] [<ffffffff8021a8f8>] vfs_write+0x90/0x2be
[ 279.412362] [<ffffffff8021acd2>] ksys_write+0xa6/0xce
[ 279.412467] [<ffffffff8021ad24>] sys_write+0x2a/0x38
[ 279.412689] [<ffffffff80003ff8>] ret_from_syscall+0x0/0x2
[ 279.417173] sysrq: CPU6: backtrace skipped as idling
[ 279.417185] sysrq: CPU4: backtrace skipped as idling
[ 279.417187] sysrq: CPU0: backtrace skipped as idling
[ 279.417181] sysrq: CPU7: backtrace skipped as idling
[ 279.417190] sysrq: CPU1: backtrace skipped as idling
[ 279.417193] sysrq: CPU3: backtrace skipped as idling
[ 279.417219] sysrq: CPU2:
[ 279.419179] Call Trace:
[ 279.419440] [<ffffffff8000606c>] dump_backtrace+0x2c/0x3a
[ 279.419782] [<ffffffff800060ac>] show_stack+0x32/0x3e
[ 279.420015] [<ffffffff80542b30>] showacpu+0x5c/0x96
[ 279.420317] [<ffffffff800ba71c>] flush_smp_call_function_queue+0xd6/0x218
[ 279.420569] [<ffffffff800bb438>] generic_smp_call_function_single_interrupt+0x14/0x1c
[ 279.420798] [<ffffffff800079ae>] handle_IPI+0xaa/0x13a
[ 279.421024] [<ffffffff804dcb92>] riscv_intc_irq+0x56/0x70
[ 279.421274] [<ffffffff80a05b70>] generic_handle_arch_irq+0x6a/0xfa
[ 279.421518] [<ffffffff80004006>] ret_from_exception+0x0/0x10
[ 279.421750] [<ffffffff80096492>] rcu_idle_enter+0x16/0x1e
Signed-off-by: Changbin Du <[email protected]>
---
drivers/tty/sysrq.c | 13 +++++++++----
1 file changed, 9 insertions(+), 4 deletions(-)
diff --git a/drivers/tty/sysrq.c b/drivers/tty/sysrq.c
index bbfd004449b5..34cfdda4aff5 100644
--- a/drivers/tty/sysrq.c
+++ b/drivers/tty/sysrq.c
@@ -232,8 +232,10 @@ static void showacpu(void *dummy)
unsigned long flags;
/* Idle CPUs have no interesting backtrace. */
- if (idle_cpu(smp_processor_id()))
+ if (idle_cpu(smp_processor_id())) {
+ pr_info("CPU%d: backtrace skipped as idling\n", smp_processor_id());
return;
+ }
raw_spin_lock_irqsave(&show_lock, flags);
pr_info("CPU%d:\n", smp_processor_id());
@@ -260,10 +262,13 @@ static void sysrq_handle_showallcpus(int key)
if (in_hardirq())
regs = get_irq_regs();
- if (regs) {
- pr_info("CPU%d:\n", smp_processor_id());
+
+ pr_info("CPU%d:\n", smp_processor_id());
+ if (regs)
show_regs(regs);
- }
+ else
+ show_stack(NULL, NULL, KERN_INFO);
+
schedule_work(&sysrq_showallcpus);
}
}
--
2.32.0
On Mon, Jan 17, 2022 at 11:43:00PM +0800, Changbin Du wrote:
> The backtrace of current CPU also should be printed as it is active. This
> change add stack trace for current CPU and print a hint for idle CPU for
> the generic workqueue based printing. (x86 already does this)
How does x86 already do this? What processors do not currently do this?
> Now it looks like below:
> [ 279.401567] sysrq: Show backtrace of all active CPUs
> [ 279.407234] sysrq: CPU5:
> [ 279.407505] Call Trace:
> [ 279.408789] [<ffffffff8000606c>] dump_backtrace+0x2c/0x3a
> [ 279.411698] [<ffffffff800060ac>] show_stack+0x32/0x3e
> [ 279.411809] [<ffffffff80542258>] sysrq_handle_showallcpus+0x4c/0xc6
> [ 279.411929] [<ffffffff80542f16>] __handle_sysrq+0x106/0x26c
> [ 279.412034] [<ffffffff805436a8>] write_sysrq_trigger+0x64/0x74
> [ 279.412139] [<ffffffff8029cd48>] proc_reg_write+0x8e/0xe2
> [ 279.412252] [<ffffffff8021a8f8>] vfs_write+0x90/0x2be
> [ 279.412362] [<ffffffff8021acd2>] ksys_write+0xa6/0xce
> [ 279.412467] [<ffffffff8021ad24>] sys_write+0x2a/0x38
> [ 279.412689] [<ffffffff80003ff8>] ret_from_syscall+0x0/0x2
> [ 279.417173] sysrq: CPU6: backtrace skipped as idling
> [ 279.417185] sysrq: CPU4: backtrace skipped as idling
> [ 279.417187] sysrq: CPU0: backtrace skipped as idling
> [ 279.417181] sysrq: CPU7: backtrace skipped as idling
> [ 279.417190] sysrq: CPU1: backtrace skipped as idling
> [ 279.417193] sysrq: CPU3: backtrace skipped as idling
> [ 279.417219] sysrq: CPU2:
> [ 279.419179] Call Trace:
> [ 279.419440] [<ffffffff8000606c>] dump_backtrace+0x2c/0x3a
> [ 279.419782] [<ffffffff800060ac>] show_stack+0x32/0x3e
> [ 279.420015] [<ffffffff80542b30>] showacpu+0x5c/0x96
> [ 279.420317] [<ffffffff800ba71c>] flush_smp_call_function_queue+0xd6/0x218
> [ 279.420569] [<ffffffff800bb438>] generic_smp_call_function_single_interrupt+0x14/0x1c
> [ 279.420798] [<ffffffff800079ae>] handle_IPI+0xaa/0x13a
> [ 279.421024] [<ffffffff804dcb92>] riscv_intc_irq+0x56/0x70
> [ 279.421274] [<ffffffff80a05b70>] generic_handle_arch_irq+0x6a/0xfa
> [ 279.421518] [<ffffffff80004006>] ret_from_exception+0x0/0x10
> [ 279.421750] [<ffffffff80096492>] rcu_idle_enter+0x16/0x1e
>
> Signed-off-by: Changbin Du <[email protected]>
> ---
> drivers/tty/sysrq.c | 13 +++++++++----
> 1 file changed, 9 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/tty/sysrq.c b/drivers/tty/sysrq.c
> index bbfd004449b5..34cfdda4aff5 100644
> --- a/drivers/tty/sysrq.c
> +++ b/drivers/tty/sysrq.c
> @@ -232,8 +232,10 @@ static void showacpu(void *dummy)
> unsigned long flags;
>
> /* Idle CPUs have no interesting backtrace. */
> - if (idle_cpu(smp_processor_id()))
> + if (idle_cpu(smp_processor_id())) {
> + pr_info("CPU%d: backtrace skipped as idling\n", smp_processor_id());
> return;
> + }
Why do you need to see the skipped processor? Can't you just infer this
from a lack of calltrace on the other cpus? What needs to see this
information?
>
> raw_spin_lock_irqsave(&show_lock, flags);
> pr_info("CPU%d:\n", smp_processor_id());
> @@ -260,10 +262,13 @@ static void sysrq_handle_showallcpus(int key)
>
> if (in_hardirq())
> regs = get_irq_regs();
> - if (regs) {
> - pr_info("CPU%d:\n", smp_processor_id());
> +
> + pr_info("CPU%d:\n", smp_processor_id());
> + if (regs)
> show_regs(regs);
> - }
> + else
> + show_stack(NULL, NULL, KERN_INFO);
> +
Why is this change needed as well?
thanks,
greg k-h
Hi, Greg,
On Mon, Jan 17, 2022 at 04:50:21PM +0100, Greg Kroah-Hartman wrote:
> On Mon, Jan 17, 2022 at 11:43:00PM +0800, Changbin Du wrote:
> > The backtrace of current CPU also should be printed as it is active. This
> > change add stack trace for current CPU and print a hint for idle CPU for
> > the generic workqueue based printing. (x86 already does this)
>
> How does x86 already do this? What processors do not currently do this?
>
The default hevaiour on x86 is as below:
1) The current CPU (active) is printed.
2) There is a hint for idle cpu. This is helpful for me to distingusih whether
the not printed cpu is in idle or a problem of stacktrace itself (which
really happed on me).
root@ubuntu:~# echo l > /proc/sysrq-trigger
[ 34.622117] sysrq: Show backtrace of all active CPUs
[ 34.622573] NMI backtrace for cpu 0
[ 34.622576] CPU: 0 PID: 1145 Comm: bash Not tainted 5.16.0+ #120 8a8a684efa076f0b679fc9dbfc6ff35722bf429e
[ 34.622579] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014
[ 34.622584] Call Trace:
[ 34.622588] <TASK>
[ 34.622589] dump_stack_lvl+0x45/0x59
[ 34.622598] nmi_cpu_backtrace.cold+0x30/0x76
[ 34.622600] ? lapic_can_unplug_cpu+0x80/0x80
[ 34.622605] nmi_trigger_cpumask_backtrace+0x104/0x130
[ 34.622610] __handle_sysrq.cold+0x43/0x129
[ 34.622614] write_sysrq_trigger+0x3f/0x50
[ 34.622618] proc_reg_write+0x55/0xa0
[ 34.622622] vfs_write+0xe4/0x320
[ 34.622627] ksys_write+0x68/0xe0
[ 34.622631] do_syscall_64+0x3b/0xc0
[ 34.622634] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 34.622637] RIP: 0033:0x7f51db009c27
[ 34.622640] Code: 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 284
[ 34.622641] RSP: 002b:00007ffcef29e828 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[ 34.622644] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f51db009c27
[ 34.622646] RDX: 0000000000000002 RSI: 00005556146896f0 RDI: 0000000000000001
[ 34.622647] RBP: 00005556146896f0 R08: 000000000000000a R09: 0000000000000000
[ 34.622648] R10: 00007f51db0a7040 R11: 0000000000000246 R12: 0000000000000002
[ 34.622649] R13: 00007f51db0e36c0 R14: 00007f51db0e44a0 R15: 00007f51db0e38a0
[ 34.622657] </TASK>
[ 34.622658] Sending NMI from CPU 0 to CPUs 1-7:
[ 34.622676] NMI backtrace for cpu 7
[ 34.622678] CPU: 7 PID: 1187 Comm: unattended-upgr Not tainted 5.16.0+ #120 8a8a684efa076f0b679fc9dbfc6ff35722bf429e
[ 34.622681] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014
[ 34.622682] RIP: 0010:kmem_cache_free+0x27b/0x480
[ 34.622685] Code: 01 59 01 4c 8d 34 10 48 8b 35 a1 01 59 01 49 c1 ee 0c 49 c1 e6 06 49 01 f6 49 8b 46 08 48 8d 50 ff a8 01 4c 0f 45 f2 49 8b 06 <f6> c4 02 0f 84 20 01 00 00 4d 85 f6 0f8
[ 34.622687] RSP: 0018:ffffc90000e2bdc0 EFLAGS: 00000202
[ 34.622689] RAX: 000fffffc0010200 RBX: ffff888009754000 RCX: 0000000000000000
[ 34.622690] RDX: ffffea000025d400 RSI: ffffea0000000000 RDI: ffff888009754000
[ 34.622691] RBP: ffffc90000e2be08 R08: 000000080fac04bd R09: 0000000000000000
[ 34.622692] R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff81436575
[ 34.622694] R13: ffff888005479100 R14: ffffea000025d400 R15: 0000000000000000
[ 34.622695] FS: 00007fc9e5b1c740(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000
[ 34.622696] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 34.622697] CR2: 00007fc9dba14024 CR3: 0000000028f04002 CR4: 0000000000370ee0
[ 34.622699] Call Trace:
[ 34.622700] <TASK>
[ 34.622702] user_path_at_empty+0x45/0x50
[ 34.622705] vfs_statx+0x74/0x130
[ 34.622708] __do_sys_newfstatat+0x31/0x70
[ 34.622710] ? lock_release+0x148/0x430
[ 34.622714] ? syscall_enter_from_user_mode+0x17/0x60
[ 34.622716] ? trace_hardirqs_on+0x2b/0xe0
[ 34.622719] ? syscall_enter_from_user_mode+0x17/0x60
[ 34.622720] do_syscall_64+0x3b/0xc0
[ 34.622722] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 34.622724] RIP: 0033:0x7fc9e5c260ae
[ 34.622726] Code: 48 89 f2 b9 00 01 00 00 48 89 fe bf 9c ff ff ff e9 07 00 00 00 0f 1f 80 00 00 00 00 f3 0f 1e fa 41 89 ca b8 06 01 00 00 0f 05 <3d> 00 f0 ff ff 77 0b 31 c0 c3 0f 1f 841
[ 34.622727] RSP: 002b:00007ffed7182998 EFLAGS: 00000246 ORIG_RAX: 0000000000000106
[ 34.622729] RAX: ffffffffffffffda RBX: 00000000021f8ab0 RCX: 00007fc9e5c260ae
[ 34.622730] RDX: 00007ffed71829a0 RSI: 0000000001d90230 RDI: 00000000ffffff9c
[ 34.622731] RBP: 00007ffed7182ad0 R08: 0000000001d90230 R09: 0000000000000064
[ 34.622732] R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffed7182ae0
[ 34.622733] R13: 00007ffed7182ac0 R14: 00007ffed7182b50 R15: 00000000ffffff00
[ 34.622736] </TASK>
[ 34.622736] NMI backtrace for cpu 5 skipped: idling at default_idle+0x10/0x20
[ 34.622743] NMI backtrace for cpu 4 skipped: idling at default_idle+0x10/0x20
[ 34.622746] NMI backtrace for cpu 6 skipped: idling at default_idle+0x10/0x20
[ 34.622751] NMI backtrace for cpu 3 skipped: idling at default_idle+0x10/0x20
[ 34.622756] NMI backtrace for cpu 2 skipped: idling at default_idle+0x10/0x20
[ 34.622762] NMI backtrace for cpu 1 skipped: idling at default_idle+0x10/0x20
> > Now it looks like below:
> > [ 279.401567] sysrq: Show backtrace of all active CPUs
> > [ 279.407234] sysrq: CPU5:
> > [ 279.407505] Call Trace:
> > [ 279.408789] [<ffffffff8000606c>] dump_backtrace+0x2c/0x3a
> > [ 279.411698] [<ffffffff800060ac>] show_stack+0x32/0x3e
> > [ 279.411809] [<ffffffff80542258>] sysrq_handle_showallcpus+0x4c/0xc6
> > [ 279.411929] [<ffffffff80542f16>] __handle_sysrq+0x106/0x26c
> > [ 279.412034] [<ffffffff805436a8>] write_sysrq_trigger+0x64/0x74
> > [ 279.412139] [<ffffffff8029cd48>] proc_reg_write+0x8e/0xe2
> > [ 279.412252] [<ffffffff8021a8f8>] vfs_write+0x90/0x2be
> > [ 279.412362] [<ffffffff8021acd2>] ksys_write+0xa6/0xce
> > [ 279.412467] [<ffffffff8021ad24>] sys_write+0x2a/0x38
> > [ 279.412689] [<ffffffff80003ff8>] ret_from_syscall+0x0/0x2
> > [ 279.417173] sysrq: CPU6: backtrace skipped as idling
> > [ 279.417185] sysrq: CPU4: backtrace skipped as idling
> > [ 279.417187] sysrq: CPU0: backtrace skipped as idling
> > [ 279.417181] sysrq: CPU7: backtrace skipped as idling
> > [ 279.417190] sysrq: CPU1: backtrace skipped as idling
> > [ 279.417193] sysrq: CPU3: backtrace skipped as idling
> > [ 279.417219] sysrq: CPU2:
> > [ 279.419179] Call Trace:
> > [ 279.419440] [<ffffffff8000606c>] dump_backtrace+0x2c/0x3a
> > [ 279.419782] [<ffffffff800060ac>] show_stack+0x32/0x3e
> > [ 279.420015] [<ffffffff80542b30>] showacpu+0x5c/0x96
> > [ 279.420317] [<ffffffff800ba71c>] flush_smp_call_function_queue+0xd6/0x218
> > [ 279.420569] [<ffffffff800bb438>] generic_smp_call_function_single_interrupt+0x14/0x1c
> > [ 279.420798] [<ffffffff800079ae>] handle_IPI+0xaa/0x13a
> > [ 279.421024] [<ffffffff804dcb92>] riscv_intc_irq+0x56/0x70
> > [ 279.421274] [<ffffffff80a05b70>] generic_handle_arch_irq+0x6a/0xfa
> > [ 279.421518] [<ffffffff80004006>] ret_from_exception+0x0/0x10
> > [ 279.421750] [<ffffffff80096492>] rcu_idle_enter+0x16/0x1e
> >
> > Signed-off-by: Changbin Du <[email protected]>
> > ---
> > drivers/tty/sysrq.c | 13 +++++++++----
> > 1 file changed, 9 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/tty/sysrq.c b/drivers/tty/sysrq.c
> > index bbfd004449b5..34cfdda4aff5 100644
> > --- a/drivers/tty/sysrq.c
> > +++ b/drivers/tty/sysrq.c
> > @@ -232,8 +232,10 @@ static void showacpu(void *dummy)
> > unsigned long flags;
> >
> > /* Idle CPUs have no interesting backtrace. */
> > - if (idle_cpu(smp_processor_id()))
> > + if (idle_cpu(smp_processor_id())) {
> > + pr_info("CPU%d: backtrace skipped as idling\n", smp_processor_id());
> > return;
> > + }
>
> Why do you need to see the skipped processor? Can't you just infer this
> from a lack of calltrace on the other cpus? What needs to see this
> information?
>
> >
> > raw_spin_lock_irqsave(&show_lock, flags);
> > pr_info("CPU%d:\n", smp_processor_id());
> > @@ -260,10 +262,13 @@ static void sysrq_handle_showallcpus(int key)
> >
> > if (in_hardirq())
> > regs = get_irq_regs();
> > - if (regs) {
> > - pr_info("CPU%d:\n", smp_processor_id());
> > +
> > + pr_info("CPU%d:\n", smp_processor_id());
> > + if (regs)
> > show_regs(regs);
> > - }
> > + else
> > + show_stack(NULL, NULL, KERN_INFO);
> > +
>
> Why is this change needed as well?
>
On the contrary, I wonder why the current cpu is skipped? Isn't it active?
> thanks,
>
> greg k-h
--
Cheers,
Changbin Du
On Tue, Jan 18, 2022 at 08:33:58AM +0800, Changbin Du wrote:
> Hi, Greg,
> On Mon, Jan 17, 2022 at 04:50:21PM +0100, Greg Kroah-Hartman wrote:
> > On Mon, Jan 17, 2022 at 11:43:00PM +0800, Changbin Du wrote:
> > > The backtrace of current CPU also should be printed as it is active. This
> > > change add stack trace for current CPU and print a hint for idle CPU for
> > > the generic workqueue based printing. (x86 already does this)
> >
> > How does x86 already do this? What processors do not currently do this?
> >
>
> The default hevaiour on x86 is as below:
> 1) The current CPU (active) is printed.
> 2) There is a hint for idle cpu. This is helpful for me to distingusih whether
> the not printed cpu is in idle or a problem of stacktrace itself (which
> really happed on me).
>
> root@ubuntu:~# echo l > /proc/sysrq-trigger
> [ 34.622117] sysrq: Show backtrace of all active CPUs
> [ 34.622573] NMI backtrace for cpu 0
> [ 34.622576] CPU: 0 PID: 1145 Comm: bash Not tainted 5.16.0+ #120 8a8a684efa076f0b679fc9dbfc6ff35722bf429e
> [ 34.622579] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014
> [ 34.622584] Call Trace:
> [ 34.622588] <TASK>
> [ 34.622589] dump_stack_lvl+0x45/0x59
> [ 34.622598] nmi_cpu_backtrace.cold+0x30/0x76
> [ 34.622600] ? lapic_can_unplug_cpu+0x80/0x80
> [ 34.622605] nmi_trigger_cpumask_backtrace+0x104/0x130
> [ 34.622610] __handle_sysrq.cold+0x43/0x129
> [ 34.622614] write_sysrq_trigger+0x3f/0x50
> [ 34.622618] proc_reg_write+0x55/0xa0
> [ 34.622622] vfs_write+0xe4/0x320
> [ 34.622627] ksys_write+0x68/0xe0
> [ 34.622631] do_syscall_64+0x3b/0xc0
> [ 34.622634] entry_SYSCALL_64_after_hwframe+0x44/0xae
> [ 34.622637] RIP: 0033:0x7f51db009c27
> [ 34.622640] Code: 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 284
> [ 34.622641] RSP: 002b:00007ffcef29e828 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
> [ 34.622644] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f51db009c27
> [ 34.622646] RDX: 0000000000000002 RSI: 00005556146896f0 RDI: 0000000000000001
> [ 34.622647] RBP: 00005556146896f0 R08: 000000000000000a R09: 0000000000000000
> [ 34.622648] R10: 00007f51db0a7040 R11: 0000000000000246 R12: 0000000000000002
> [ 34.622649] R13: 00007f51db0e36c0 R14: 00007f51db0e44a0 R15: 00007f51db0e38a0
> [ 34.622657] </TASK>
> [ 34.622658] Sending NMI from CPU 0 to CPUs 1-7:
> [ 34.622676] NMI backtrace for cpu 7
> [ 34.622678] CPU: 7 PID: 1187 Comm: unattended-upgr Not tainted 5.16.0+ #120 8a8a684efa076f0b679fc9dbfc6ff35722bf429e
> [ 34.622681] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014
> [ 34.622682] RIP: 0010:kmem_cache_free+0x27b/0x480
> [ 34.622685] Code: 01 59 01 4c 8d 34 10 48 8b 35 a1 01 59 01 49 c1 ee 0c 49 c1 e6 06 49 01 f6 49 8b 46 08 48 8d 50 ff a8 01 4c 0f 45 f2 49 8b 06 <f6> c4 02 0f 84 20 01 00 00 4d 85 f6 0f8
> [ 34.622687] RSP: 0018:ffffc90000e2bdc0 EFLAGS: 00000202
> [ 34.622689] RAX: 000fffffc0010200 RBX: ffff888009754000 RCX: 0000000000000000
> [ 34.622690] RDX: ffffea000025d400 RSI: ffffea0000000000 RDI: ffff888009754000
> [ 34.622691] RBP: ffffc90000e2be08 R08: 000000080fac04bd R09: 0000000000000000
> [ 34.622692] R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff81436575
> [ 34.622694] R13: ffff888005479100 R14: ffffea000025d400 R15: 0000000000000000
> [ 34.622695] FS: 00007fc9e5b1c740(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000
> [ 34.622696] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> [ 34.622697] CR2: 00007fc9dba14024 CR3: 0000000028f04002 CR4: 0000000000370ee0
> [ 34.622699] Call Trace:
> [ 34.622700] <TASK>
> [ 34.622702] user_path_at_empty+0x45/0x50
> [ 34.622705] vfs_statx+0x74/0x130
> [ 34.622708] __do_sys_newfstatat+0x31/0x70
> [ 34.622710] ? lock_release+0x148/0x430
> [ 34.622714] ? syscall_enter_from_user_mode+0x17/0x60
> [ 34.622716] ? trace_hardirqs_on+0x2b/0xe0
> [ 34.622719] ? syscall_enter_from_user_mode+0x17/0x60
> [ 34.622720] do_syscall_64+0x3b/0xc0
> [ 34.622722] entry_SYSCALL_64_after_hwframe+0x44/0xae
> [ 34.622724] RIP: 0033:0x7fc9e5c260ae
> [ 34.622726] Code: 48 89 f2 b9 00 01 00 00 48 89 fe bf 9c ff ff ff e9 07 00 00 00 0f 1f 80 00 00 00 00 f3 0f 1e fa 41 89 ca b8 06 01 00 00 0f 05 <3d> 00 f0 ff ff 77 0b 31 c0 c3 0f 1f 841
> [ 34.622727] RSP: 002b:00007ffed7182998 EFLAGS: 00000246 ORIG_RAX: 0000000000000106
> [ 34.622729] RAX: ffffffffffffffda RBX: 00000000021f8ab0 RCX: 00007fc9e5c260ae
> [ 34.622730] RDX: 00007ffed71829a0 RSI: 0000000001d90230 RDI: 00000000ffffff9c
> [ 34.622731] RBP: 00007ffed7182ad0 R08: 0000000001d90230 R09: 0000000000000064
> [ 34.622732] R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffed7182ae0
> [ 34.622733] R13: 00007ffed7182ac0 R14: 00007ffed7182b50 R15: 00000000ffffff00
> [ 34.622736] </TASK>
> [ 34.622736] NMI backtrace for cpu 5 skipped: idling at default_idle+0x10/0x20
> [ 34.622743] NMI backtrace for cpu 4 skipped: idling at default_idle+0x10/0x20
> [ 34.622746] NMI backtrace for cpu 6 skipped: idling at default_idle+0x10/0x20
> [ 34.622751] NMI backtrace for cpu 3 skipped: idling at default_idle+0x10/0x20
> [ 34.622756] NMI backtrace for cpu 2 skipped: idling at default_idle+0x10/0x20
> [ 34.622762] NMI backtrace for cpu 1 skipped: idling at default_idle+0x10/0x20
>
>
> > > Now it looks like below:
> > > [ 279.401567] sysrq: Show backtrace of all active CPUs
> > > [ 279.407234] sysrq: CPU5:
> > > [ 279.407505] Call Trace:
> > > [ 279.408789] [<ffffffff8000606c>] dump_backtrace+0x2c/0x3a
> > > [ 279.411698] [<ffffffff800060ac>] show_stack+0x32/0x3e
> > > [ 279.411809] [<ffffffff80542258>] sysrq_handle_showallcpus+0x4c/0xc6
> > > [ 279.411929] [<ffffffff80542f16>] __handle_sysrq+0x106/0x26c
> > > [ 279.412034] [<ffffffff805436a8>] write_sysrq_trigger+0x64/0x74
> > > [ 279.412139] [<ffffffff8029cd48>] proc_reg_write+0x8e/0xe2
> > > [ 279.412252] [<ffffffff8021a8f8>] vfs_write+0x90/0x2be
> > > [ 279.412362] [<ffffffff8021acd2>] ksys_write+0xa6/0xce
> > > [ 279.412467] [<ffffffff8021ad24>] sys_write+0x2a/0x38
> > > [ 279.412689] [<ffffffff80003ff8>] ret_from_syscall+0x0/0x2
> > > [ 279.417173] sysrq: CPU6: backtrace skipped as idling
> > > [ 279.417185] sysrq: CPU4: backtrace skipped as idling
> > > [ 279.417187] sysrq: CPU0: backtrace skipped as idling
> > > [ 279.417181] sysrq: CPU7: backtrace skipped as idling
> > > [ 279.417190] sysrq: CPU1: backtrace skipped as idling
> > > [ 279.417193] sysrq: CPU3: backtrace skipped as idling
> > > [ 279.417219] sysrq: CPU2:
> > > [ 279.419179] Call Trace:
> > > [ 279.419440] [<ffffffff8000606c>] dump_backtrace+0x2c/0x3a
> > > [ 279.419782] [<ffffffff800060ac>] show_stack+0x32/0x3e
> > > [ 279.420015] [<ffffffff80542b30>] showacpu+0x5c/0x96
> > > [ 279.420317] [<ffffffff800ba71c>] flush_smp_call_function_queue+0xd6/0x218
> > > [ 279.420569] [<ffffffff800bb438>] generic_smp_call_function_single_interrupt+0x14/0x1c
> > > [ 279.420798] [<ffffffff800079ae>] handle_IPI+0xaa/0x13a
> > > [ 279.421024] [<ffffffff804dcb92>] riscv_intc_irq+0x56/0x70
> > > [ 279.421274] [<ffffffff80a05b70>] generic_handle_arch_irq+0x6a/0xfa
> > > [ 279.421518] [<ffffffff80004006>] ret_from_exception+0x0/0x10
> > > [ 279.421750] [<ffffffff80096492>] rcu_idle_enter+0x16/0x1e
> > >
> > > Signed-off-by: Changbin Du <[email protected]>
> > > ---
> > > drivers/tty/sysrq.c | 13 +++++++++----
> > > 1 file changed, 9 insertions(+), 4 deletions(-)
> > >
> > > diff --git a/drivers/tty/sysrq.c b/drivers/tty/sysrq.c
> > > index bbfd004449b5..34cfdda4aff5 100644
> > > --- a/drivers/tty/sysrq.c
> > > +++ b/drivers/tty/sysrq.c
> > > @@ -232,8 +232,10 @@ static void showacpu(void *dummy)
> > > unsigned long flags;
> > >
> > > /* Idle CPUs have no interesting backtrace. */
> > > - if (idle_cpu(smp_processor_id()))
> > > + if (idle_cpu(smp_processor_id())) {
> > > + pr_info("CPU%d: backtrace skipped as idling\n", smp_processor_id());
> > > return;
> > > + }
> >
> > Why do you need to see the skipped processor? Can't you just infer this
> > from a lack of calltrace on the other cpus? What needs to see this
> > information?
> >
> > >
> > > raw_spin_lock_irqsave(&show_lock, flags);
> > > pr_info("CPU%d:\n", smp_processor_id());
> > > @@ -260,10 +262,13 @@ static void sysrq_handle_showallcpus(int key)
> > >
> > > if (in_hardirq())
> > > regs = get_irq_regs();
> > > - if (regs) {
> > > - pr_info("CPU%d:\n", smp_processor_id());
> > > +
> > > + pr_info("CPU%d:\n", smp_processor_id());
> > > + if (regs)
> > > show_regs(regs);
> > > - }
> > > + else
> > > + show_stack(NULL, NULL, KERN_INFO);
> > > +
> >
> > Why is this change needed as well?
> >
> On the contrary, I wonder why the current cpu is skipped? Isn't it active?
Ok, let's try this and see if people complain :)