just 0 should be used to represent cleared bits
* ETHER_CLK_SEL_DIV_SEL_20
* ETHER_CLK_SEL_TX_CLK_EXT_SEL_IN
* ETHER_CLK_SEL_RX_CLK_EXT_SEL_IN
* ETHER_CLK_SEL_TX_CLK_O_TX_I
* ETHER_CLK_SEL_RMII_CLK_SEL_IN
Signed-off-by: Yuji Ishikawa <[email protected]>
Reviewed-by: Nobuhiro Iwamatsu <[email protected]>
---
drivers/net/ethernet/stmicro/stmmac/dwmac-visconti.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-visconti.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-visconti.c
index e2e0f9778..43a446cea 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-visconti.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-visconti.c
@@ -22,21 +22,21 @@
#define ETHER_CLK_SEL_RMII_CLK_EN BIT(2)
#define ETHER_CLK_SEL_RMII_CLK_RST BIT(3)
#define ETHER_CLK_SEL_DIV_SEL_2 BIT(4)
-#define ETHER_CLK_SEL_DIV_SEL_20 BIT(0)
+#define ETHER_CLK_SEL_DIV_SEL_20 0
#define ETHER_CLK_SEL_FREQ_SEL_125M (BIT(9) | BIT(8))
#define ETHER_CLK_SEL_FREQ_SEL_50M BIT(9)
#define ETHER_CLK_SEL_FREQ_SEL_25M BIT(8)
#define ETHER_CLK_SEL_FREQ_SEL_2P5M 0
-#define ETHER_CLK_SEL_TX_CLK_EXT_SEL_IN BIT(0)
+#define ETHER_CLK_SEL_TX_CLK_EXT_SEL_IN 0
#define ETHER_CLK_SEL_TX_CLK_EXT_SEL_TXC BIT(10)
#define ETHER_CLK_SEL_TX_CLK_EXT_SEL_DIV BIT(11)
-#define ETHER_CLK_SEL_RX_CLK_EXT_SEL_IN BIT(0)
+#define ETHER_CLK_SEL_RX_CLK_EXT_SEL_IN 0
#define ETHER_CLK_SEL_RX_CLK_EXT_SEL_RXC BIT(12)
#define ETHER_CLK_SEL_RX_CLK_EXT_SEL_DIV BIT(13)
-#define ETHER_CLK_SEL_TX_CLK_O_TX_I BIT(0)
+#define ETHER_CLK_SEL_TX_CLK_O_TX_I 0
#define ETHER_CLK_SEL_TX_CLK_O_RMII_I BIT(14)
#define ETHER_CLK_SEL_TX_O_E_N_IN BIT(15)
-#define ETHER_CLK_SEL_RMII_CLK_SEL_IN BIT(0)
+#define ETHER_CLK_SEL_RMII_CLK_SEL_IN 0
#define ETHER_CLK_SEL_RMII_CLK_SEL_RX_C BIT(16)
#define ETHER_CLK_SEL_RX_TX_CLK_EN (ETHER_CLK_SEL_RX_CLK_EN | ETHER_CLK_SEL_TX_CLK_EN)
--
2.17.1