2022-01-24 18:58:37

by Jammy Huang

[permalink] [raw]
Subject: [PATCH v3 0/4] Correct timing report

This series will correct the value of timing detected.

Changes in v3:
- Add API, aspeed_video_get_timings(), for the calculation of timings
- Use active rather than 'total/2' as critera for sync polarity workaround
Changes in v2:
- code refined to improve readability

Jammy Huang (4):
media: aspeed: Correct value for h-total-pixels
media: aspeed: Use FIELD_GET to improve readability
media: aspeed: Correct values for detected timing
media: aspeed: Fix timing polarity incorrect

drivers/media/platform/aspeed-video.c | 139 ++++++++++++++++++++------
1 file changed, 111 insertions(+), 28 deletions(-)

--
2.25.1


2022-01-24 18:58:40

by Jammy Huang

[permalink] [raw]
Subject: [PATCH v3 1/4] media: aspeed: Correct value for h-total-pixels

Previous reg-field, 0x98[11:0], stands for the period of the detected
hsync signal.
Use the correct reg, 0xa0, to get h-total in pixels.

Fixes: d2b4387f3bdf ("media: platform: Add Aspeed Video Engine driver")
Signed-off-by: Jammy Huang <[email protected]>
Reviewed-by: Joel Stanley <[email protected]>
---
v3:
- no update
v2:
- no update
---
drivers/media/platform/aspeed-video.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/media/platform/aspeed-video.c b/drivers/media/platform/aspeed-video.c
index b388bc56ce81..d5f77b205175 100644
--- a/drivers/media/platform/aspeed-video.c
+++ b/drivers/media/platform/aspeed-video.c
@@ -166,7 +166,7 @@
#define VE_SRC_TB_EDGE_DET_BOT GENMASK(28, VE_SRC_TB_EDGE_DET_BOT_SHF)

#define VE_MODE_DETECT_STATUS 0x098
-#define VE_MODE_DETECT_H_PIXELS GENMASK(11, 0)
+#define VE_MODE_DETECT_H_PERIOD GENMASK(11, 0)
#define VE_MODE_DETECT_V_LINES_SHF 16
#define VE_MODE_DETECT_V_LINES GENMASK(27, VE_MODE_DETECT_V_LINES_SHF)
#define VE_MODE_DETECT_STATUS_VSYNC BIT(28)
@@ -177,6 +177,8 @@
#define VE_SYNC_STATUS_VSYNC_SHF 16
#define VE_SYNC_STATUS_VSYNC GENMASK(27, VE_SYNC_STATUS_VSYNC_SHF)

+#define VE_H_TOTAL_PIXELS 0x0A0
+
#define VE_INTERRUPT_CTRL 0x304
#define VE_INTERRUPT_STATUS 0x308
#define VE_INTERRUPT_MODE_DETECT_WD BIT(0)
@@ -938,6 +940,7 @@ static void aspeed_video_get_resolution(struct aspeed_video *video)
u32 src_lr_edge;
u32 src_tb_edge;
u32 sync;
+ u32 htotal;
struct v4l2_bt_timings *det = &video->detected_timings;

det->width = MIN_WIDTH;
@@ -983,6 +986,7 @@ static void aspeed_video_get_resolution(struct aspeed_video *video)
src_tb_edge = aspeed_video_read(video, VE_SRC_TB_EDGE_DET);
mds = aspeed_video_read(video, VE_MODE_DETECT_STATUS);
sync = aspeed_video_read(video, VE_SYNC_STATUS);
+ htotal = aspeed_video_read(video, VE_H_TOTAL_PIXELS);

video->frame_bottom = (src_tb_edge & VE_SRC_TB_EDGE_DET_BOT) >>
VE_SRC_TB_EDGE_DET_BOT_SHF;
@@ -999,8 +1003,7 @@ static void aspeed_video_get_resolution(struct aspeed_video *video)
VE_SRC_LR_EDGE_DET_RT_SHF;
video->frame_left = src_lr_edge & VE_SRC_LR_EDGE_DET_LEFT;
det->hfrontporch = video->frame_left;
- det->hbackporch = (mds & VE_MODE_DETECT_H_PIXELS) -
- video->frame_right;
+ det->hbackporch = htotal - video->frame_right;
det->hsync = sync & VE_SYNC_STATUS_HSYNC;
if (video->frame_left > video->frame_right)
continue;
--
2.25.1