This series will correct the value of timing detected.
Changes in v4:
- Combine patch 3 and 4
Changes in v3:
- Add API, aspeed_video_get_timings(), for the calculation of timings
- Use active rather than 'total/2' as critera for sync polarity workaround
Changes in v2:
- code refined to improve readability
Jammy Huang (3):
media: aspeed: Correct value for h-total-pixels
media: aspeed: Use FIELD_GET to improve readability
media: aspeed: Correct values for detected timing
drivers/media/platform/aspeed-video.c | 137 ++++++++++++++++++++------
1 file changed, 109 insertions(+), 28 deletions(-)
--
2.25.1
Use the bitfield macro FIELD_GET, and GENMASK to do the shift and mask in
one go for reg values.
Signed-off-by: Jammy Huang <[email protected]>
Reviewed-by: Joel Stanley <[email protected]>
---
v4:
- no update
v3:
- no update
v2:
- Put some codes on one line
---
drivers/media/platform/aspeed-video.c | 31 +++++++++++----------------
1 file changed, 12 insertions(+), 19 deletions(-)
diff --git a/drivers/media/platform/aspeed-video.c b/drivers/media/platform/aspeed-video.c
index d5f77b205175..c241038ee27c 100644
--- a/drivers/media/platform/aspeed-video.c
+++ b/drivers/media/platform/aspeed-video.c
@@ -156,26 +156,22 @@
#define VE_SRC_LR_EDGE_DET_NO_H BIT(13)
#define VE_SRC_LR_EDGE_DET_NO_DISP BIT(14)
#define VE_SRC_LR_EDGE_DET_NO_CLK BIT(15)
-#define VE_SRC_LR_EDGE_DET_RT_SHF 16
-#define VE_SRC_LR_EDGE_DET_RT GENMASK(27, VE_SRC_LR_EDGE_DET_RT_SHF)
+#define VE_SRC_LR_EDGE_DET_RT GENMASK(27, 16)
#define VE_SRC_LR_EDGE_DET_INTERLACE BIT(31)
#define VE_SRC_TB_EDGE_DET 0x094
#define VE_SRC_TB_EDGE_DET_TOP GENMASK(12, 0)
-#define VE_SRC_TB_EDGE_DET_BOT_SHF 16
-#define VE_SRC_TB_EDGE_DET_BOT GENMASK(28, VE_SRC_TB_EDGE_DET_BOT_SHF)
+#define VE_SRC_TB_EDGE_DET_BOT GENMASK(28, 16)
#define VE_MODE_DETECT_STATUS 0x098
#define VE_MODE_DETECT_H_PERIOD GENMASK(11, 0)
-#define VE_MODE_DETECT_V_LINES_SHF 16
-#define VE_MODE_DETECT_V_LINES GENMASK(27, VE_MODE_DETECT_V_LINES_SHF)
+#define VE_MODE_DETECT_V_LINES GENMASK(27, 16)
#define VE_MODE_DETECT_STATUS_VSYNC BIT(28)
#define VE_MODE_DETECT_STATUS_HSYNC BIT(29)
#define VE_SYNC_STATUS 0x09c
#define VE_SYNC_STATUS_HSYNC GENMASK(11, 0)
-#define VE_SYNC_STATUS_VSYNC_SHF 16
-#define VE_SYNC_STATUS_VSYNC GENMASK(27, VE_SYNC_STATUS_VSYNC_SHF)
+#define VE_SYNC_STATUS_VSYNC GENMASK(27, 16)
#define VE_H_TOTAL_PIXELS 0x0A0
@@ -988,23 +984,20 @@ static void aspeed_video_get_resolution(struct aspeed_video *video)
sync = aspeed_video_read(video, VE_SYNC_STATUS);
htotal = aspeed_video_read(video, VE_H_TOTAL_PIXELS);
- video->frame_bottom = (src_tb_edge & VE_SRC_TB_EDGE_DET_BOT) >>
- VE_SRC_TB_EDGE_DET_BOT_SHF;
- video->frame_top = src_tb_edge & VE_SRC_TB_EDGE_DET_TOP;
+ video->frame_bottom = FIELD_GET(VE_SRC_TB_EDGE_DET_BOT, src_tb_edge);
+ video->frame_top = FIELD_GET(VE_SRC_TB_EDGE_DET_TOP, src_tb_edge);
det->vfrontporch = video->frame_top;
- det->vbackporch = ((mds & VE_MODE_DETECT_V_LINES) >>
- VE_MODE_DETECT_V_LINES_SHF) - video->frame_bottom;
- det->vsync = (sync & VE_SYNC_STATUS_VSYNC) >>
- VE_SYNC_STATUS_VSYNC_SHF;
+ det->vbackporch = FIELD_GET(VE_MODE_DETECT_V_LINES, mds) -
+ video->frame_bottom;
+ det->vsync = FIELD_GET(VE_SYNC_STATUS_VSYNC, sync);
if (video->frame_top > video->frame_bottom)
continue;
- video->frame_right = (src_lr_edge & VE_SRC_LR_EDGE_DET_RT) >>
- VE_SRC_LR_EDGE_DET_RT_SHF;
- video->frame_left = src_lr_edge & VE_SRC_LR_EDGE_DET_LEFT;
+ video->frame_right = FIELD_GET(VE_SRC_LR_EDGE_DET_RT, src_lr_edge);
+ video->frame_left = FIELD_GET(VE_SRC_LR_EDGE_DET_LEFT, src_lr_edge);
det->hfrontporch = video->frame_left;
det->hbackporch = htotal - video->frame_right;
- det->hsync = sync & VE_SYNC_STATUS_HSYNC;
+ det->hsync = FIELD_GET(VE_SYNC_STATUS_HSYNC, sync);
if (video->frame_left > video->frame_right)
continue;
--
2.25.1
Previous reg-field, 0x98[11:0], stands for the period of the detected
hsync signal.
Use the correct reg, 0xa0, to get h-total in pixels.
Fixes: d2b4387f3bdf ("media: platform: Add Aspeed Video Engine driver")
Signed-off-by: Jammy Huang <[email protected]>
Reviewed-by: Joel Stanley <[email protected]>
---
v4:
- no update
v3:
- no update
v2:
- no update
---
drivers/media/platform/aspeed-video.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/media/platform/aspeed-video.c b/drivers/media/platform/aspeed-video.c
index b388bc56ce81..d5f77b205175 100644
--- a/drivers/media/platform/aspeed-video.c
+++ b/drivers/media/platform/aspeed-video.c
@@ -166,7 +166,7 @@
#define VE_SRC_TB_EDGE_DET_BOT GENMASK(28, VE_SRC_TB_EDGE_DET_BOT_SHF)
#define VE_MODE_DETECT_STATUS 0x098
-#define VE_MODE_DETECT_H_PIXELS GENMASK(11, 0)
+#define VE_MODE_DETECT_H_PERIOD GENMASK(11, 0)
#define VE_MODE_DETECT_V_LINES_SHF 16
#define VE_MODE_DETECT_V_LINES GENMASK(27, VE_MODE_DETECT_V_LINES_SHF)
#define VE_MODE_DETECT_STATUS_VSYNC BIT(28)
@@ -177,6 +177,8 @@
#define VE_SYNC_STATUS_VSYNC_SHF 16
#define VE_SYNC_STATUS_VSYNC GENMASK(27, VE_SYNC_STATUS_VSYNC_SHF)
+#define VE_H_TOTAL_PIXELS 0x0A0
+
#define VE_INTERRUPT_CTRL 0x304
#define VE_INTERRUPT_STATUS 0x308
#define VE_INTERRUPT_MODE_DETECT_WD BIT(0)
@@ -938,6 +940,7 @@ static void aspeed_video_get_resolution(struct aspeed_video *video)
u32 src_lr_edge;
u32 src_tb_edge;
u32 sync;
+ u32 htotal;
struct v4l2_bt_timings *det = &video->detected_timings;
det->width = MIN_WIDTH;
@@ -983,6 +986,7 @@ static void aspeed_video_get_resolution(struct aspeed_video *video)
src_tb_edge = aspeed_video_read(video, VE_SRC_TB_EDGE_DET);
mds = aspeed_video_read(video, VE_MODE_DETECT_STATUS);
sync = aspeed_video_read(video, VE_SYNC_STATUS);
+ htotal = aspeed_video_read(video, VE_H_TOTAL_PIXELS);
video->frame_bottom = (src_tb_edge & VE_SRC_TB_EDGE_DET_BOT) >>
VE_SRC_TB_EDGE_DET_BOT_SHF;
@@ -999,8 +1003,7 @@ static void aspeed_video_get_resolution(struct aspeed_video *video)
VE_SRC_LR_EDGE_DET_RT_SHF;
video->frame_left = src_lr_edge & VE_SRC_LR_EDGE_DET_LEFT;
det->hfrontporch = video->frame_left;
- det->hbackporch = (mds & VE_MODE_DETECT_H_PIXELS) -
- video->frame_right;
+ det->hbackporch = htotal - video->frame_right;
det->hsync = sync & VE_SYNC_STATUS_HSYNC;
if (video->frame_left > video->frame_right)
continue;
--
2.25.1