Export shrink_zone_span() and update_pgdat_span() functions to head
file. We need to update real number of spanned pages for NUMA nodes and
zones when we add memory device node such as device dax memory.
Signed-off-by: Jonghyeon Kim <[email protected]>
---
include/linux/memory_hotplug.h | 3 +++
mm/memory_hotplug.c | 6 ++++--
2 files changed, 7 insertions(+), 2 deletions(-)
diff --git a/include/linux/memory_hotplug.h b/include/linux/memory_hotplug.h
index be48e003a518..25c7f60c317e 100644
--- a/include/linux/memory_hotplug.h
+++ b/include/linux/memory_hotplug.h
@@ -337,6 +337,9 @@ extern void move_pfn_range_to_zone(struct zone *zone, unsigned long start_pfn,
extern void remove_pfn_range_from_zone(struct zone *zone,
unsigned long start_pfn,
unsigned long nr_pages);
+extern void shrink_zone_span(struct zone *zone, unsigned long start_pfn,
+ unsigned long end_pfn);
+extern void update_pgdat_span(struct pglist_data *pgdat);
extern bool is_memblock_offlined(struct memory_block *mem);
extern int sparse_add_section(int nid, unsigned long pfn,
unsigned long nr_pages, struct vmem_altmap *altmap);
diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
index 2a9627dc784c..38f46a9ef853 100644
--- a/mm/memory_hotplug.c
+++ b/mm/memory_hotplug.c
@@ -389,7 +389,7 @@ static unsigned long find_biggest_section_pfn(int nid, struct zone *zone,
return 0;
}
-static void shrink_zone_span(struct zone *zone, unsigned long start_pfn,
+void shrink_zone_span(struct zone *zone, unsigned long start_pfn,
unsigned long end_pfn)
{
unsigned long pfn;
@@ -428,8 +428,9 @@ static void shrink_zone_span(struct zone *zone, unsigned long start_pfn,
}
}
}
+EXPORT_SYMBOL_GPL(shrink_zone_span);
-static void update_pgdat_span(struct pglist_data *pgdat)
+void update_pgdat_span(struct pglist_data *pgdat)
{
unsigned long node_start_pfn = 0, node_end_pfn = 0;
struct zone *zone;
@@ -456,6 +457,7 @@ static void update_pgdat_span(struct pglist_data *pgdat)
pgdat->node_start_pfn = node_start_pfn;
pgdat->node_spanned_pages = node_end_pfn - node_start_pfn;
}
+EXPORT_SYMBOL_GPL(update_pgdat_span);
void __ref remove_pfn_range_from_zone(struct zone *zone,
unsigned long start_pfn,
--
2.17.1
On 26.01.22 18:00, Jonghyeon Kim wrote:
> Export shrink_zone_span() and update_pgdat_span() functions to head
> file. We need to update real number of spanned pages for NUMA nodes and
> zones when we add memory device node such as device dax memory.
>
Can you elaborate a bit more what you intend to fix?
Memory onlining/offlining is reponsible for updating the node/zone span,
and that's triggered when the dax/kmem mamory gets onlined/offlined.
> Signed-off-by: Jonghyeon Kim <[email protected]>
> ---
> include/linux/memory_hotplug.h | 3 +++
> mm/memory_hotplug.c | 6 ++++--
> 2 files changed, 7 insertions(+), 2 deletions(-)
>
> diff --git a/include/linux/memory_hotplug.h b/include/linux/memory_hotplug.h
> index be48e003a518..25c7f60c317e 100644
> --- a/include/linux/memory_hotplug.h
> +++ b/include/linux/memory_hotplug.h
> @@ -337,6 +337,9 @@ extern void move_pfn_range_to_zone(struct zone *zone, unsigned long start_pfn,
> extern void remove_pfn_range_from_zone(struct zone *zone,
> unsigned long start_pfn,
> unsigned long nr_pages);
> +extern void shrink_zone_span(struct zone *zone, unsigned long start_pfn,
> + unsigned long end_pfn);
> +extern void update_pgdat_span(struct pglist_data *pgdat);
> extern bool is_memblock_offlined(struct memory_block *mem);
> extern int sparse_add_section(int nid, unsigned long pfn,
> unsigned long nr_pages, struct vmem_altmap *altmap);
> diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
> index 2a9627dc784c..38f46a9ef853 100644
> --- a/mm/memory_hotplug.c
> +++ b/mm/memory_hotplug.c
> @@ -389,7 +389,7 @@ static unsigned long find_biggest_section_pfn(int nid, struct zone *zone,
> return 0;
> }
>
> -static void shrink_zone_span(struct zone *zone, unsigned long start_pfn,
> +void shrink_zone_span(struct zone *zone, unsigned long start_pfn,
> unsigned long end_pfn)
> {
> unsigned long pfn;
> @@ -428,8 +428,9 @@ static void shrink_zone_span(struct zone *zone, unsigned long start_pfn,
> }
> }
> }
> +EXPORT_SYMBOL_GPL(shrink_zone_span);
Exporting both as symbols feels very wrong. This is memory
onlining/offlining internal stuff.
--
Thanks,
David / dhildenb
On Wed, Jan 26, 2022 at 06:04:50PM +0100, David Hildenbrand wrote:
> On 26.01.22 18:00, Jonghyeon Kim wrote:
> > Export shrink_zone_span() and update_pgdat_span() functions to head
> > file. We need to update real number of spanned pages for NUMA nodes and
> > zones when we add memory device node such as device dax memory.
> >
>
> Can you elaborate a bit more what you intend to fix?
>
> Memory onlining/offlining is reponsible for updating the node/zone span,
> and that's triggered when the dax/kmem mamory gets onlined/offlined.
>
Sure, sorry for the lack of explanation of the intended fix.
Before onlining nvdimm memory using dax(devdax or fsdax), these memory belong to
cpu NUMA nodes, which extends span pages of node/zone as a ZONE_DEVICE. So there
is no problem because node/zone contain these additional non-visible memory
devices to the system.
But, if we online dax-memory, zone[ZONE_DEVICE] of CPU NUMA node is hot-plugged
to new NUMA node(but CPU-less). I think there is no need to hold
zone[ZONE_DEVICE] pages on the original node.
Additionally, spanned pages are also used to calculate the end pfn of a node.
Thus, it is needed to maintain accurate page stats for node/zone.
My machine contains two CPU-socket consisting of DRAM and Intel DCPMM
(DC persistent memory modules) with App-Direct mode.
Below are my test results.
Before memory onlining:
# ndctl create-namespace --mode=devdax
# ndctl create-namespace --mode=devdax
# cat /proc/zoneinfo | grep -E "Node|spanned" | paste - -
Node 0, zone DMA spanned 4095
Node 0, zone DMA32 spanned 1044480
Node 0, zone Normal spanned 7864320
Node 0, zone Movable spanned 0
Node 0, zone Device spanned 66060288
Node 1, zone DMA spanned 0
Node 1, zone DMA32 spanned 0
Node 1, zone Normal spanned 8388608
Node 1, zone Movable spanned 0
Node 1, zone Device spanned 66060288
After memory onlining:
# daxctl reconfigure-device --mode=system-ram --no-online dax0.0
# daxctl reconfigure-device --mode=system-ram --no-online dax1.0
# cat /proc/zoneinfo | grep -E "Node|spanned" | paste - -
Node 0, zone DMA spanned 4095
Node 0, zone DMA32 spanned 1044480
Node 0, zone Normal spanned 7864320
Node 0, zone Movable spanned 0
Node 0, zone Device spanned 66060288
Node 1, zone DMA spanned 0
Node 1, zone DMA32 spanned 0
Node 1, zone Normal spanned 8388608
Node 1, zone Movable spanned 0
Node 1, zone Device spanned 66060288
Node 2, zone DMA spanned 0
Node 2, zone DMA32 spanned 0
Node 2, zone Normal spanned 65011712
Node 2, zone Movable spanned 0
Node 2, zone Device spanned 0
Node 3, zone DMA spanned 0
Node 3, zone DMA32 spanned 0
Node 3, zone Normal spanned 65011712
Node 3, zone Movable spanned 0
Node 3, zone Device spanned 0
As we can see, Node 0 and 1 still have zone_device pages after memory onlining.
This causes problem that Node 0 and Node 2 have same end of pfn values, also
Node 1 and Node 3 have same problem.
> > Signed-off-by: Jonghyeon Kim <[email protected]>
> > ---
> > include/linux/memory_hotplug.h | 3 +++
> > mm/memory_hotplug.c | 6 ++++--
> > 2 files changed, 7 insertions(+), 2 deletions(-)
> >
> > diff --git a/include/linux/memory_hotplug.h b/include/linux/memory_hotplug.h
> > index be48e003a518..25c7f60c317e 100644
> > --- a/include/linux/memory_hotplug.h
> > +++ b/include/linux/memory_hotplug.h
> > @@ -337,6 +337,9 @@ extern void move_pfn_range_to_zone(struct zone *zone, unsigned long start_pfn,
> > extern void remove_pfn_range_from_zone(struct zone *zone,
> > unsigned long start_pfn,
> > unsigned long nr_pages);
> > +extern void shrink_zone_span(struct zone *zone, unsigned long start_pfn,
> > + unsigned long end_pfn);
> > +extern void update_pgdat_span(struct pglist_data *pgdat);
> > extern bool is_memblock_offlined(struct memory_block *mem);
> > extern int sparse_add_section(int nid, unsigned long pfn,
> > unsigned long nr_pages, struct vmem_altmap *altmap);
> > diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
> > index 2a9627dc784c..38f46a9ef853 100644
> > --- a/mm/memory_hotplug.c
> > +++ b/mm/memory_hotplug.c
> > @@ -389,7 +389,7 @@ static unsigned long find_biggest_section_pfn(int nid, struct zone *zone,
> > return 0;
> > }
> >
> > -static void shrink_zone_span(struct zone *zone, unsigned long start_pfn,
> > +void shrink_zone_span(struct zone *zone, unsigned long start_pfn,
> > unsigned long end_pfn)
> > {
> > unsigned long pfn;
> > @@ -428,8 +428,9 @@ static void shrink_zone_span(struct zone *zone, unsigned long start_pfn,
> > }
> > }
> > }
> > +EXPORT_SYMBOL_GPL(shrink_zone_span);
>
> Exporting both as symbols feels very wrong. This is memory
> onlining/offlining internal stuff.
I agree with you that your comment. I will find another approach to avoid
directly using onlining/offlining internal stuff while updating node/zone span.
Thanks,
Jonghyeon
>
>
>
> --
> Thanks,
>
> David / dhildenb
>
On 27.01.22 10:41, Jonghyeon Kim wrote:
> On Wed, Jan 26, 2022 at 06:04:50PM +0100, David Hildenbrand wrote:
>> On 26.01.22 18:00, Jonghyeon Kim wrote:
>>> Export shrink_zone_span() and update_pgdat_span() functions to head
>>> file. We need to update real number of spanned pages for NUMA nodes and
>>> zones when we add memory device node such as device dax memory.
>>>
>>
>> Can you elaborate a bit more what you intend to fix?
>>
>> Memory onlining/offlining is reponsible for updating the node/zone span,
>> and that's triggered when the dax/kmem mamory gets onlined/offlined.
>>
> Sure, sorry for the lack of explanation of the intended fix.
>
> Before onlining nvdimm memory using dax(devdax or fsdax), these memory belong to
> cpu NUMA nodes, which extends span pages of node/zone as a ZONE_DEVICE. So there
> is no problem because node/zone contain these additional non-visible memory
> devices to the system.
> But, if we online dax-memory, zone[ZONE_DEVICE] of CPU NUMA node is hot-plugged
> to new NUMA node(but CPU-less). I think there is no need to hold
> zone[ZONE_DEVICE] pages on the original node.
>
> Additionally, spanned pages are also used to calculate the end pfn of a node.
> Thus, it is needed to maintain accurate page stats for node/zone.
>
> My machine contains two CPU-socket consisting of DRAM and Intel DCPMM
> (DC persistent memory modules) with App-Direct mode.
>
> Below are my test results.
>
> Before memory onlining:
>
> # ndctl create-namespace --mode=devdax
> # ndctl create-namespace --mode=devdax
> # cat /proc/zoneinfo | grep -E "Node|spanned" | paste - -
> Node 0, zone DMA spanned 4095
> Node 0, zone DMA32 spanned 1044480
> Node 0, zone Normal spanned 7864320
> Node 0, zone Movable spanned 0
> Node 0, zone Device spanned 66060288
> Node 1, zone DMA spanned 0
> Node 1, zone DMA32 spanned 0
> Node 1, zone Normal spanned 8388608
> Node 1, zone Movable spanned 0
> Node 1, zone Device spanned 66060288
>
> After memory onlining:
>
> # daxctl reconfigure-device --mode=system-ram --no-online dax0.0
> # daxctl reconfigure-device --mode=system-ram --no-online dax1.0
>
> # cat /proc/zoneinfo | grep -E "Node|spanned" | paste - -
> Node 0, zone DMA spanned 4095
> Node 0, zone DMA32 spanned 1044480
> Node 0, zone Normal spanned 7864320
> Node 0, zone Movable spanned 0
> Node 0, zone Device spanned 66060288
> Node 1, zone DMA spanned 0
> Node 1, zone DMA32 spanned 0
> Node 1, zone Normal spanned 8388608
> Node 1, zone Movable spanned 0
> Node 1, zone Device spanned 66060288
> Node 2, zone DMA spanned 0
> Node 2, zone DMA32 spanned 0
> Node 2, zone Normal spanned 65011712
> Node 2, zone Movable spanned 0
> Node 2, zone Device spanned 0
> Node 3, zone DMA spanned 0
> Node 3, zone DMA32 spanned 0
> Node 3, zone Normal spanned 65011712
> Node 3, zone Movable spanned 0
> Node 3, zone Device spanned 0
>
> As we can see, Node 0 and 1 still have zone_device pages after memory onlining.
> This causes problem that Node 0 and Node 2 have same end of pfn values, also
> Node 1 and Node 3 have same problem.
Thanks for the information, that makes it clearer.
While this unfortunate, the node/zone span is something fairly
unreliable/unusable for user space. Nodes and zones can overlap just easily.
What counts are present/managed pages in the node/zone.
So at least I don't count this as something that "needs fixing",
it's more something that's nice to handle better if easily possible.
See below.
>
>>> Signed-off-by: Jonghyeon Kim <[email protected]>
>>> ---
>>> include/linux/memory_hotplug.h | 3 +++
>>> mm/memory_hotplug.c | 6 ++++--
>>> 2 files changed, 7 insertions(+), 2 deletions(-)
>>>
>>> diff --git a/include/linux/memory_hotplug.h b/include/linux/memory_hotplug.h
>>> index be48e003a518..25c7f60c317e 100644
>>> --- a/include/linux/memory_hotplug.h
>>> +++ b/include/linux/memory_hotplug.h
>>> @@ -337,6 +337,9 @@ extern void move_pfn_range_to_zone(struct zone *zone, unsigned long start_pfn,
>>> extern void remove_pfn_range_from_zone(struct zone *zone,
>>> unsigned long start_pfn,
>>> unsigned long nr_pages);
>>> +extern void shrink_zone_span(struct zone *zone, unsigned long start_pfn,
>>> + unsigned long end_pfn);
>>> +extern void update_pgdat_span(struct pglist_data *pgdat);
>>> extern bool is_memblock_offlined(struct memory_block *mem);
>>> extern int sparse_add_section(int nid, unsigned long pfn,
>>> unsigned long nr_pages, struct vmem_altmap *altmap);
>>> diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
>>> index 2a9627dc784c..38f46a9ef853 100644
>>> --- a/mm/memory_hotplug.c
>>> +++ b/mm/memory_hotplug.c
>>> @@ -389,7 +389,7 @@ static unsigned long find_biggest_section_pfn(int nid, struct zone *zone,
>>> return 0;
>>> }
>>>
>>> -static void shrink_zone_span(struct zone *zone, unsigned long start_pfn,
>>> +void shrink_zone_span(struct zone *zone, unsigned long start_pfn,
>>> unsigned long end_pfn)
>>> {
>>> unsigned long pfn;
>>> @@ -428,8 +428,9 @@ static void shrink_zone_span(struct zone *zone, unsigned long start_pfn,
>>> }
>>> }
>>> }
>>> +EXPORT_SYMBOL_GPL(shrink_zone_span);
>>
>> Exporting both as symbols feels very wrong. This is memory
>> onlining/offlining internal stuff.
>
> I agree with you that your comment. I will find another approach to avoid
> directly using onlining/offlining internal stuff while updating node/zone span.
IIRC, to handle what you intend to handle properly want to look into teaching
remove_pfn_range_from_zone() to handle zone_is_zone_device().
There is a big fat comment:
/*
* Zone shrinking code cannot properly deal with ZONE_DEVICE. So
* we will not try to shrink the zones - which is okay as
* set_zone_contiguous() cannot deal with ZONE_DEVICE either way.
*/
if (zone_is_zone_device(zone))
return;
Similarly, try_offline_node() spells this out:
/*
* If the node still spans pages (especially ZONE_DEVICE), don't
* offline it. A node spans memory after move_pfn_range_to_zone(),
* e.g., after the memory block was onlined.
*/
if (pgdat->node_spanned_pages)
return;
So once you handle remove_pfn_range_from_zone() cleanly, you'll cleanly handle
try_offline_node() implicitly.
Trying to update the node span manually without teaching node/zone shrinking code how to
handle ZONE_DEVICE properly is just a hack that will only sometimes work. Especially, it
won't work if the range of interest is still surrounded by other ranges.
--
Thanks,
David / dhildenb
On Thu, Jan 27, 2022 at 10:54:23AM +0100, David Hildenbrand wrote:
> On 27.01.22 10:41, Jonghyeon Kim wrote:
> > On Wed, Jan 26, 2022 at 06:04:50PM +0100, David Hildenbrand wrote:
> >> On 26.01.22 18:00, Jonghyeon Kim wrote:
> >>> Export shrink_zone_span() and update_pgdat_span() functions to head
> >>> file. We need to update real number of spanned pages for NUMA nodes and
> >>> zones when we add memory device node such as device dax memory.
> >>>
> >>
> >> Can you elaborate a bit more what you intend to fix?
> >>
> >> Memory onlining/offlining is reponsible for updating the node/zone span,
> >> and that's triggered when the dax/kmem mamory gets onlined/offlined.
> >>
> > Sure, sorry for the lack of explanation of the intended fix.
> >
> > Before onlining nvdimm memory using dax(devdax or fsdax), these memory belong to
> > cpu NUMA nodes, which extends span pages of node/zone as a ZONE_DEVICE. So there
> > is no problem because node/zone contain these additional non-visible memory
> > devices to the system.
> > But, if we online dax-memory, zone[ZONE_DEVICE] of CPU NUMA node is hot-plugged
> > to new NUMA node(but CPU-less). I think there is no need to hold
> > zone[ZONE_DEVICE] pages on the original node.
> >
> > Additionally, spanned pages are also used to calculate the end pfn of a node.
> > Thus, it is needed to maintain accurate page stats for node/zone.
> >
> > My machine contains two CPU-socket consisting of DRAM and Intel DCPMM
> > (DC persistent memory modules) with App-Direct mode.
> >
> > Below are my test results.
> >
> > Before memory onlining:
> >
> > # ndctl create-namespace --mode=devdax
> > # ndctl create-namespace --mode=devdax
> > # cat /proc/zoneinfo | grep -E "Node|spanned" | paste - -
> > Node 0, zone DMA spanned 4095
> > Node 0, zone DMA32 spanned 1044480
> > Node 0, zone Normal spanned 7864320
> > Node 0, zone Movable spanned 0
> > Node 0, zone Device spanned 66060288
> > Node 1, zone DMA spanned 0
> > Node 1, zone DMA32 spanned 0
> > Node 1, zone Normal spanned 8388608
> > Node 1, zone Movable spanned 0
> > Node 1, zone Device spanned 66060288
> >
> > After memory onlining:
> >
> > # daxctl reconfigure-device --mode=system-ram --no-online dax0.0
> > # daxctl reconfigure-device --mode=system-ram --no-online dax1.0
> >
> > # cat /proc/zoneinfo | grep -E "Node|spanned" | paste - -
> > Node 0, zone DMA spanned 4095
> > Node 0, zone DMA32 spanned 1044480
> > Node 0, zone Normal spanned 7864320
> > Node 0, zone Movable spanned 0
> > Node 0, zone Device spanned 66060288
> > Node 1, zone DMA spanned 0
> > Node 1, zone DMA32 spanned 0
> > Node 1, zone Normal spanned 8388608
> > Node 1, zone Movable spanned 0
> > Node 1, zone Device spanned 66060288
> > Node 2, zone DMA spanned 0
> > Node 2, zone DMA32 spanned 0
> > Node 2, zone Normal spanned 65011712
> > Node 2, zone Movable spanned 0
> > Node 2, zone Device spanned 0
> > Node 3, zone DMA spanned 0
> > Node 3, zone DMA32 spanned 0
> > Node 3, zone Normal spanned 65011712
> > Node 3, zone Movable spanned 0
> > Node 3, zone Device spanned 0
> >
> > As we can see, Node 0 and 1 still have zone_device pages after memory onlining.
> > This causes problem that Node 0 and Node 2 have same end of pfn values, also
> > Node 1 and Node 3 have same problem.
>
> Thanks for the information, that makes it clearer.
>
> While this unfortunate, the node/zone span is something fairly
> unreliable/unusable for user space. Nodes and zones can overlap just easily.
>
> What counts are present/managed pages in the node/zone.
>
> So at least I don't count this as something that "needs fixing",
> it's more something that's nice to handle better if easily possible.
>
> See below.
>
> >
> >>> Signed-off-by: Jonghyeon Kim <[email protected]>
> >>> ---
> >>> include/linux/memory_hotplug.h | 3 +++
> >>> mm/memory_hotplug.c | 6 ++++--
> >>> 2 files changed, 7 insertions(+), 2 deletions(-)
> >>>
> >>> diff --git a/include/linux/memory_hotplug.h b/include/linux/memory_hotplug.h
> >>> index be48e003a518..25c7f60c317e 100644
> >>> --- a/include/linux/memory_hotplug.h
> >>> +++ b/include/linux/memory_hotplug.h
> >>> @@ -337,6 +337,9 @@ extern void move_pfn_range_to_zone(struct zone *zone, unsigned long start_pfn,
> >>> extern void remove_pfn_range_from_zone(struct zone *zone,
> >>> unsigned long start_pfn,
> >>> unsigned long nr_pages);
> >>> +extern void shrink_zone_span(struct zone *zone, unsigned long start_pfn,
> >>> + unsigned long end_pfn);
> >>> +extern void update_pgdat_span(struct pglist_data *pgdat);
> >>> extern bool is_memblock_offlined(struct memory_block *mem);
> >>> extern int sparse_add_section(int nid, unsigned long pfn,
> >>> unsigned long nr_pages, struct vmem_altmap *altmap);
> >>> diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
> >>> index 2a9627dc784c..38f46a9ef853 100644
> >>> --- a/mm/memory_hotplug.c
> >>> +++ b/mm/memory_hotplug.c
> >>> @@ -389,7 +389,7 @@ static unsigned long find_biggest_section_pfn(int nid, struct zone *zone,
> >>> return 0;
> >>> }
> >>>
> >>> -static void shrink_zone_span(struct zone *zone, unsigned long start_pfn,
> >>> +void shrink_zone_span(struct zone *zone, unsigned long start_pfn,
> >>> unsigned long end_pfn)
> >>> {
> >>> unsigned long pfn;
> >>> @@ -428,8 +428,9 @@ static void shrink_zone_span(struct zone *zone, unsigned long start_pfn,
> >>> }
> >>> }
> >>> }
> >>> +EXPORT_SYMBOL_GPL(shrink_zone_span);
> >>
> >> Exporting both as symbols feels very wrong. This is memory
> >> onlining/offlining internal stuff.
> >
> > I agree with you that your comment. I will find another approach to avoid
> > directly using onlining/offlining internal stuff while updating node/zone span.
>
> IIRC, to handle what you intend to handle properly want to look into teaching
> remove_pfn_range_from_zone() to handle zone_is_zone_device().
>
> There is a big fat comment:
>
> /*
> * Zone shrinking code cannot properly deal with ZONE_DEVICE. So
> * we will not try to shrink the zones - which is okay as
> * set_zone_contiguous() cannot deal with ZONE_DEVICE either way.
> */
> if (zone_is_zone_device(zone))
> return;
>
>
> Similarly, try_offline_node() spells this out:
>
> /*
> * If the node still spans pages (especially ZONE_DEVICE), don't
> * offline it. A node spans memory after move_pfn_range_to_zone(),
> * e.g., after the memory block was onlined.
> */
> if (pgdat->node_spanned_pages)
> return;
>
>
> So once you handle remove_pfn_range_from_zone() cleanly, you'll cleanly handle
> try_offline_node() implicitly.
>
> Trying to update the node span manually without teaching node/zone shrinking code how to
> handle ZONE_DEVICE properly is just a hack that will only sometimes work. Especially, it
> won't work if the range of interest is still surrounded by other ranges.
>
Thanks for your pointing out, I missed those comments.
I will keep trying to handle node/zone span updating process.
> --
> Thanks,
>
> David / dhildenb
>
On 28.01.22 05:19, Jonghyeon Kim wrote:
> On Thu, Jan 27, 2022 at 10:54:23AM +0100, David Hildenbrand wrote:
>> On 27.01.22 10:41, Jonghyeon Kim wrote:
>>> On Wed, Jan 26, 2022 at 06:04:50PM +0100, David Hildenbrand wrote:
>>>> On 26.01.22 18:00, Jonghyeon Kim wrote:
>>>>> Export shrink_zone_span() and update_pgdat_span() functions to head
>>>>> file. We need to update real number of spanned pages for NUMA nodes and
>>>>> zones when we add memory device node such as device dax memory.
>>>>>
>>>>
>>>> Can you elaborate a bit more what you intend to fix?
>>>>
>>>> Memory onlining/offlining is reponsible for updating the node/zone span,
>>>> and that's triggered when the dax/kmem mamory gets onlined/offlined.
>>>>
>>> Sure, sorry for the lack of explanation of the intended fix.
>>>
>>> Before onlining nvdimm memory using dax(devdax or fsdax), these memory belong to
>>> cpu NUMA nodes, which extends span pages of node/zone as a ZONE_DEVICE. So there
>>> is no problem because node/zone contain these additional non-visible memory
>>> devices to the system.
>>> But, if we online dax-memory, zone[ZONE_DEVICE] of CPU NUMA node is hot-plugged
>>> to new NUMA node(but CPU-less). I think there is no need to hold
>>> zone[ZONE_DEVICE] pages on the original node.
>>>
>>> Additionally, spanned pages are also used to calculate the end pfn of a node.
>>> Thus, it is needed to maintain accurate page stats for node/zone.
>>>
>>> My machine contains two CPU-socket consisting of DRAM and Intel DCPMM
>>> (DC persistent memory modules) with App-Direct mode.
>>>
>>> Below are my test results.
>>>
>>> Before memory onlining:
>>>
>>> # ndctl create-namespace --mode=devdax
>>> # ndctl create-namespace --mode=devdax
>>> # cat /proc/zoneinfo | grep -E "Node|spanned" | paste - -
>>> Node 0, zone DMA spanned 4095
>>> Node 0, zone DMA32 spanned 1044480
>>> Node 0, zone Normal spanned 7864320
>>> Node 0, zone Movable spanned 0
>>> Node 0, zone Device spanned 66060288
>>> Node 1, zone DMA spanned 0
>>> Node 1, zone DMA32 spanned 0
>>> Node 1, zone Normal spanned 8388608
>>> Node 1, zone Movable spanned 0
>>> Node 1, zone Device spanned 66060288
>>>
>>> After memory onlining:
>>>
>>> # daxctl reconfigure-device --mode=system-ram --no-online dax0.0
>>> # daxctl reconfigure-device --mode=system-ram --no-online dax1.0
>>>
>>> # cat /proc/zoneinfo | grep -E "Node|spanned" | paste - -
>>> Node 0, zone DMA spanned 4095
>>> Node 0, zone DMA32 spanned 1044480
>>> Node 0, zone Normal spanned 7864320
>>> Node 0, zone Movable spanned 0
>>> Node 0, zone Device spanned 66060288
>>> Node 1, zone DMA spanned 0
>>> Node 1, zone DMA32 spanned 0
>>> Node 1, zone Normal spanned 8388608
>>> Node 1, zone Movable spanned 0
>>> Node 1, zone Device spanned 66060288
>>> Node 2, zone DMA spanned 0
>>> Node 2, zone DMA32 spanned 0
>>> Node 2, zone Normal spanned 65011712
>>> Node 2, zone Movable spanned 0
>>> Node 2, zone Device spanned 0
>>> Node 3, zone DMA spanned 0
>>> Node 3, zone DMA32 spanned 0
>>> Node 3, zone Normal spanned 65011712
>>> Node 3, zone Movable spanned 0
>>> Node 3, zone Device spanned 0
>>>
>>> As we can see, Node 0 and 1 still have zone_device pages after memory onlining.
>>> This causes problem that Node 0 and Node 2 have same end of pfn values, also
>>> Node 1 and Node 3 have same problem.
>>
>> Thanks for the information, that makes it clearer.
>>
>> While this unfortunate, the node/zone span is something fairly
>> unreliable/unusable for user space. Nodes and zones can overlap just easily.
>>
>> What counts are present/managed pages in the node/zone.
>>
>> So at least I don't count this as something that "needs fixing",
>> it's more something that's nice to handle better if easily possible.
>>
>> See below.
>>
>>>
>>>>> Signed-off-by: Jonghyeon Kim <[email protected]>
>>>>> ---
>>>>> include/linux/memory_hotplug.h | 3 +++
>>>>> mm/memory_hotplug.c | 6 ++++--
>>>>> 2 files changed, 7 insertions(+), 2 deletions(-)
>>>>>
>>>>> diff --git a/include/linux/memory_hotplug.h b/include/linux/memory_hotplug.h
>>>>> index be48e003a518..25c7f60c317e 100644
>>>>> --- a/include/linux/memory_hotplug.h
>>>>> +++ b/include/linux/memory_hotplug.h
>>>>> @@ -337,6 +337,9 @@ extern void move_pfn_range_to_zone(struct zone *zone, unsigned long start_pfn,
>>>>> extern void remove_pfn_range_from_zone(struct zone *zone,
>>>>> unsigned long start_pfn,
>>>>> unsigned long nr_pages);
>>>>> +extern void shrink_zone_span(struct zone *zone, unsigned long start_pfn,
>>>>> + unsigned long end_pfn);
>>>>> +extern void update_pgdat_span(struct pglist_data *pgdat);
>>>>> extern bool is_memblock_offlined(struct memory_block *mem);
>>>>> extern int sparse_add_section(int nid, unsigned long pfn,
>>>>> unsigned long nr_pages, struct vmem_altmap *altmap);
>>>>> diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
>>>>> index 2a9627dc784c..38f46a9ef853 100644
>>>>> --- a/mm/memory_hotplug.c
>>>>> +++ b/mm/memory_hotplug.c
>>>>> @@ -389,7 +389,7 @@ static unsigned long find_biggest_section_pfn(int nid, struct zone *zone,
>>>>> return 0;
>>>>> }
>>>>>
>>>>> -static void shrink_zone_span(struct zone *zone, unsigned long start_pfn,
>>>>> +void shrink_zone_span(struct zone *zone, unsigned long start_pfn,
>>>>> unsigned long end_pfn)
>>>>> {
>>>>> unsigned long pfn;
>>>>> @@ -428,8 +428,9 @@ static void shrink_zone_span(struct zone *zone, unsigned long start_pfn,
>>>>> }
>>>>> }
>>>>> }
>>>>> +EXPORT_SYMBOL_GPL(shrink_zone_span);
>>>>
>>>> Exporting both as symbols feels very wrong. This is memory
>>>> onlining/offlining internal stuff.
>>>
>>> I agree with you that your comment. I will find another approach to avoid
>>> directly using onlining/offlining internal stuff while updating node/zone span.
>>
>> IIRC, to handle what you intend to handle properly want to look into teaching
>> remove_pfn_range_from_zone() to handle zone_is_zone_device().
>>
>> There is a big fat comment:
>>
>> /*
>> * Zone shrinking code cannot properly deal with ZONE_DEVICE. So
>> * we will not try to shrink the zones - which is okay as
>> * set_zone_contiguous() cannot deal with ZONE_DEVICE either way.
>> */
>> if (zone_is_zone_device(zone))
>> return;
>>
>>
>> Similarly, try_offline_node() spells this out:
>>
>> /*
>> * If the node still spans pages (especially ZONE_DEVICE), don't
>> * offline it. A node spans memory after move_pfn_range_to_zone(),
>> * e.g., after the memory block was onlined.
>> */
>> if (pgdat->node_spanned_pages)
>> return;
>>
>>
>> So once you handle remove_pfn_range_from_zone() cleanly, you'll cleanly handle
>> try_offline_node() implicitly.
>>
>> Trying to update the node span manually without teaching node/zone shrinking code how to
>> handle ZONE_DEVICE properly is just a hack that will only sometimes work. Especially, it
>> won't work if the range of interest is still surrounded by other ranges.
>>
>
> Thanks for your pointing out, I missed those comments.
> I will keep trying to handle node/zone span updating process.
The only safe thing right now for on ZONE_DEVICE in
remove_pfn_range_from_zone() would be removing the given range from the
start/end of the zone range, but we must not scan using the existing
functions.
As soon as we start actual *scanning* via find_smallest...
find_biggest... in shrink_zone_span() we would mistakenly skip other
ZONE_DEVICE ranges and mess up.
Assume you would have a ZONE_DEVICE layout like
[ DEV 0 | Hole | DEV 1 | Hole | DEV 2 ]
What we actually want to do when removing
* DEV 0 is scanning low->high until we find DEV 1
* DEV 1 is doing nothing, because we cannot shrink
* DEV 2 is scanning high -> low until we find DEV 1
I assume we'd want to call in shrink_zone_span() two new functions for
ZONE_DEVICE:
find_smallest_zone_device_pfn
find_biggest_zone_device_pfn
Which would be able to do exactly that scanning, eventually, using
get_dev_pagemap() or some similar source of information.
--
Thanks,
David / dhildenb
On 03.02.22 03:22, Jonghyeon Kim wrote:
> On Fri, Jan 28, 2022 at 09:10:21AM +0100, David Hildenbrand wrote:
>> On 28.01.22 05:19, Jonghyeon Kim wrote:
>>> On Thu, Jan 27, 2022 at 10:54:23AM +0100, David Hildenbrand wrote:
>>>> On 27.01.22 10:41, Jonghyeon Kim wrote:
>>>>> On Wed, Jan 26, 2022 at 06:04:50PM +0100, David Hildenbrand wrote:
>>>>>> On 26.01.22 18:00, Jonghyeon Kim wrote:
>>>>>>> Export shrink_zone_span() and update_pgdat_span() functions to head
>>>>>>> file. We need to update real number of spanned pages for NUMA nodes and
>>>>>>> zones when we add memory device node such as device dax memory.
>>>>>>>
>>>>>>
>>>>>> Can you elaborate a bit more what you intend to fix?
>>>>>>
>>>>>> Memory onlining/offlining is reponsible for updating the node/zone span,
>>>>>> and that's triggered when the dax/kmem mamory gets onlined/offlined.
>>>>>>
>>>>> Sure, sorry for the lack of explanation of the intended fix.
>>>>>
>>>>> Before onlining nvdimm memory using dax(devdax or fsdax), these memory belong to
>>>>> cpu NUMA nodes, which extends span pages of node/zone as a ZONE_DEVICE. So there
>>>>> is no problem because node/zone contain these additional non-visible memory
>>>>> devices to the system.
>>>>> But, if we online dax-memory, zone[ZONE_DEVICE] of CPU NUMA node is hot-plugged
>>>>> to new NUMA node(but CPU-less). I think there is no need to hold
>>>>> zone[ZONE_DEVICE] pages on the original node.
>>>>>
>>>>> Additionally, spanned pages are also used to calculate the end pfn of a node.
>>>>> Thus, it is needed to maintain accurate page stats for node/zone.
>>>>>
>>>>> My machine contains two CPU-socket consisting of DRAM and Intel DCPMM
>>>>> (DC persistent memory modules) with App-Direct mode.
>>>>>
>>>>> Below are my test results.
>>>>>
>>>>> Before memory onlining:
>>>>>
>>>>> # ndctl create-namespace --mode=devdax
>>>>> # ndctl create-namespace --mode=devdax
>>>>> # cat /proc/zoneinfo | grep -E "Node|spanned" | paste - -
>>>>> Node 0, zone DMA spanned 4095
>>>>> Node 0, zone DMA32 spanned 1044480
>>>>> Node 0, zone Normal spanned 7864320
>>>>> Node 0, zone Movable spanned 0
>>>>> Node 0, zone Device spanned 66060288
>>>>> Node 1, zone DMA spanned 0
>>>>> Node 1, zone DMA32 spanned 0
>>>>> Node 1, zone Normal spanned 8388608
>>>>> Node 1, zone Movable spanned 0
>>>>> Node 1, zone Device spanned 66060288
>>>>>
>>>>> After memory onlining:
>>>>>
>>>>> # daxctl reconfigure-device --mode=system-ram --no-online dax0.0
>>>>> # daxctl reconfigure-device --mode=system-ram --no-online dax1.0
>>>>>
>>>>> # cat /proc/zoneinfo | grep -E "Node|spanned" | paste - -
>>>>> Node 0, zone DMA spanned 4095
>>>>> Node 0, zone DMA32 spanned 1044480
>>>>> Node 0, zone Normal spanned 7864320
>>>>> Node 0, zone Movable spanned 0
>>>>> Node 0, zone Device spanned 66060288
>>>>> Node 1, zone DMA spanned 0
>>>>> Node 1, zone DMA32 spanned 0
>>>>> Node 1, zone Normal spanned 8388608
>>>>> Node 1, zone Movable spanned 0
>>>>> Node 1, zone Device spanned 66060288
>>>>> Node 2, zone DMA spanned 0
>>>>> Node 2, zone DMA32 spanned 0
>>>>> Node 2, zone Normal spanned 65011712
>>>>> Node 2, zone Movable spanned 0
>>>>> Node 2, zone Device spanned 0
>>>>> Node 3, zone DMA spanned 0
>>>>> Node 3, zone DMA32 spanned 0
>>>>> Node 3, zone Normal spanned 65011712
>>>>> Node 3, zone Movable spanned 0
>>>>> Node 3, zone Device spanned 0
>>>>>
>>>>> As we can see, Node 0 and 1 still have zone_device pages after memory onlining.
>>>>> This causes problem that Node 0 and Node 2 have same end of pfn values, also
>>>>> Node 1 and Node 3 have same problem.
>>>>
>>>> Thanks for the information, that makes it clearer.
>>>>
>>>> While this unfortunate, the node/zone span is something fairly
>>>> unreliable/unusable for user space. Nodes and zones can overlap just easily.
>>>>
>>>> What counts are present/managed pages in the node/zone.
>>>>
>>>> So at least I don't count this as something that "needs fixing",
>>>> it's more something that's nice to handle better if easily possible.
>>>>
>>>> See below.
>>>>
>>>>>
>>>>>>> Signed-off-by: Jonghyeon Kim <[email protected]>
>>>>>>> ---
>>>>>>> include/linux/memory_hotplug.h | 3 +++
>>>>>>> mm/memory_hotplug.c | 6 ++++--
>>>>>>> 2 files changed, 7 insertions(+), 2 deletions(-)
>>>>>>>
>>>>>>> diff --git a/include/linux/memory_hotplug.h b/include/linux/memory_hotplug.h
>>>>>>> index be48e003a518..25c7f60c317e 100644
>>>>>>> --- a/include/linux/memory_hotplug.h
>>>>>>> +++ b/include/linux/memory_hotplug.h
>>>>>>> @@ -337,6 +337,9 @@ extern void move_pfn_range_to_zone(struct zone *zone, unsigned long start_pfn,
>>>>>>> extern void remove_pfn_range_from_zone(struct zone *zone,
>>>>>>> unsigned long start_pfn,
>>>>>>> unsigned long nr_pages);
>>>>>>> +extern void shrink_zone_span(struct zone *zone, unsigned long start_pfn,
>>>>>>> + unsigned long end_pfn);
>>>>>>> +extern void update_pgdat_span(struct pglist_data *pgdat);
>>>>>>> extern bool is_memblock_offlined(struct memory_block *mem);
>>>>>>> extern int sparse_add_section(int nid, unsigned long pfn,
>>>>>>> unsigned long nr_pages, struct vmem_altmap *altmap);
>>>>>>> diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
>>>>>>> index 2a9627dc784c..38f46a9ef853 100644
>>>>>>> --- a/mm/memory_hotplug.c
>>>>>>> +++ b/mm/memory_hotplug.c
>>>>>>> @@ -389,7 +389,7 @@ static unsigned long find_biggest_section_pfn(int nid, struct zone *zone,
>>>>>>> return 0;
>>>>>>> }
>>>>>>>
>>>>>>> -static void shrink_zone_span(struct zone *zone, unsigned long start_pfn,
>>>>>>> +void shrink_zone_span(struct zone *zone, unsigned long start_pfn,
>>>>>>> unsigned long end_pfn)
>>>>>>> {
>>>>>>> unsigned long pfn;
>>>>>>> @@ -428,8 +428,9 @@ static void shrink_zone_span(struct zone *zone, unsigned long start_pfn,
>>>>>>> }
>>>>>>> }
>>>>>>> }
>>>>>>> +EXPORT_SYMBOL_GPL(shrink_zone_span);
>>>>>>
>>>>>> Exporting both as symbols feels very wrong. This is memory
>>>>>> onlining/offlining internal stuff.
>>>>>
>>>>> I agree with you that your comment. I will find another approach to avoid
>>>>> directly using onlining/offlining internal stuff while updating node/zone span.
>>>>
>>>> IIRC, to handle what you intend to handle properly want to look into teaching
>>>> remove_pfn_range_from_zone() to handle zone_is_zone_device().
>>>>
>>>> There is a big fat comment:
>>>>
>>>> /*
>>>> * Zone shrinking code cannot properly deal with ZONE_DEVICE. So
>>>> * we will not try to shrink the zones - which is okay as
>>>> * set_zone_contiguous() cannot deal with ZONE_DEVICE either way.
>>>> */
>>>> if (zone_is_zone_device(zone))
>>>> return;
>>>>
>>>>
>>>> Similarly, try_offline_node() spells this out:
>>>>
>>>> /*
>>>> * If the node still spans pages (especially ZONE_DEVICE), don't
>>>> * offline it. A node spans memory after move_pfn_range_to_zone(),
>>>> * e.g., after the memory block was onlined.
>>>> */
>>>> if (pgdat->node_spanned_pages)
>>>> return;
>>>>
>>>>
>>>> So once you handle remove_pfn_range_from_zone() cleanly, you'll cleanly handle
>>>> try_offline_node() implicitly.
>>>>
>>>> Trying to update the node span manually without teaching node/zone shrinking code how to
>>>> handle ZONE_DEVICE properly is just a hack that will only sometimes work. Especially, it
>>>> won't work if the range of interest is still surrounded by other ranges.
>>>>
>>>
>>> Thanks for your pointing out, I missed those comments.
>>> I will keep trying to handle node/zone span updating process.
>>
>> The only safe thing right now for on ZONE_DEVICE in
>> remove_pfn_range_from_zone() would be removing the given range from the
>> start/end of the zone range, but we must not scan using the existing
>> functions.
>>
>> As soon as we start actual *scanning* via find_smallest...
>> find_biggest... in shrink_zone_span() we would mistakenly skip other
>> ZONE_DEVICE ranges and mess up.
>>
>> Assume you would have a ZONE_DEVICE layout like
>>
>> [ DEV 0 | Hole | DEV 1 | Hole | DEV 2 ]
>>
>
> IIUC, you assumed situation that multiple ZONE_DEVICE in single node, and there
> are holes among them, right?
Exactly. But the holes are just an example to show what we'd have to do
when holes are around. Having multiple devices is the important part.
--
Thanks,
David / dhildenb
On Fri, Jan 28, 2022 at 09:10:21AM +0100, David Hildenbrand wrote:
> On 28.01.22 05:19, Jonghyeon Kim wrote:
> > On Thu, Jan 27, 2022 at 10:54:23AM +0100, David Hildenbrand wrote:
> >> On 27.01.22 10:41, Jonghyeon Kim wrote:
> >>> On Wed, Jan 26, 2022 at 06:04:50PM +0100, David Hildenbrand wrote:
> >>>> On 26.01.22 18:00, Jonghyeon Kim wrote:
> >>>>> Export shrink_zone_span() and update_pgdat_span() functions to head
> >>>>> file. We need to update real number of spanned pages for NUMA nodes and
> >>>>> zones when we add memory device node such as device dax memory.
> >>>>>
> >>>>
> >>>> Can you elaborate a bit more what you intend to fix?
> >>>>
> >>>> Memory onlining/offlining is reponsible for updating the node/zone span,
> >>>> and that's triggered when the dax/kmem mamory gets onlined/offlined.
> >>>>
> >>> Sure, sorry for the lack of explanation of the intended fix.
> >>>
> >>> Before onlining nvdimm memory using dax(devdax or fsdax), these memory belong to
> >>> cpu NUMA nodes, which extends span pages of node/zone as a ZONE_DEVICE. So there
> >>> is no problem because node/zone contain these additional non-visible memory
> >>> devices to the system.
> >>> But, if we online dax-memory, zone[ZONE_DEVICE] of CPU NUMA node is hot-plugged
> >>> to new NUMA node(but CPU-less). I think there is no need to hold
> >>> zone[ZONE_DEVICE] pages on the original node.
> >>>
> >>> Additionally, spanned pages are also used to calculate the end pfn of a node.
> >>> Thus, it is needed to maintain accurate page stats for node/zone.
> >>>
> >>> My machine contains two CPU-socket consisting of DRAM and Intel DCPMM
> >>> (DC persistent memory modules) with App-Direct mode.
> >>>
> >>> Below are my test results.
> >>>
> >>> Before memory onlining:
> >>>
> >>> # ndctl create-namespace --mode=devdax
> >>> # ndctl create-namespace --mode=devdax
> >>> # cat /proc/zoneinfo | grep -E "Node|spanned" | paste - -
> >>> Node 0, zone DMA spanned 4095
> >>> Node 0, zone DMA32 spanned 1044480
> >>> Node 0, zone Normal spanned 7864320
> >>> Node 0, zone Movable spanned 0
> >>> Node 0, zone Device spanned 66060288
> >>> Node 1, zone DMA spanned 0
> >>> Node 1, zone DMA32 spanned 0
> >>> Node 1, zone Normal spanned 8388608
> >>> Node 1, zone Movable spanned 0
> >>> Node 1, zone Device spanned 66060288
> >>>
> >>> After memory onlining:
> >>>
> >>> # daxctl reconfigure-device --mode=system-ram --no-online dax0.0
> >>> # daxctl reconfigure-device --mode=system-ram --no-online dax1.0
> >>>
> >>> # cat /proc/zoneinfo | grep -E "Node|spanned" | paste - -
> >>> Node 0, zone DMA spanned 4095
> >>> Node 0, zone DMA32 spanned 1044480
> >>> Node 0, zone Normal spanned 7864320
> >>> Node 0, zone Movable spanned 0
> >>> Node 0, zone Device spanned 66060288
> >>> Node 1, zone DMA spanned 0
> >>> Node 1, zone DMA32 spanned 0
> >>> Node 1, zone Normal spanned 8388608
> >>> Node 1, zone Movable spanned 0
> >>> Node 1, zone Device spanned 66060288
> >>> Node 2, zone DMA spanned 0
> >>> Node 2, zone DMA32 spanned 0
> >>> Node 2, zone Normal spanned 65011712
> >>> Node 2, zone Movable spanned 0
> >>> Node 2, zone Device spanned 0
> >>> Node 3, zone DMA spanned 0
> >>> Node 3, zone DMA32 spanned 0
> >>> Node 3, zone Normal spanned 65011712
> >>> Node 3, zone Movable spanned 0
> >>> Node 3, zone Device spanned 0
> >>>
> >>> As we can see, Node 0 and 1 still have zone_device pages after memory onlining.
> >>> This causes problem that Node 0 and Node 2 have same end of pfn values, also
> >>> Node 1 and Node 3 have same problem.
> >>
> >> Thanks for the information, that makes it clearer.
> >>
> >> While this unfortunate, the node/zone span is something fairly
> >> unreliable/unusable for user space. Nodes and zones can overlap just easily.
> >>
> >> What counts are present/managed pages in the node/zone.
> >>
> >> So at least I don't count this as something that "needs fixing",
> >> it's more something that's nice to handle better if easily possible.
> >>
> >> See below.
> >>
> >>>
> >>>>> Signed-off-by: Jonghyeon Kim <[email protected]>
> >>>>> ---
> >>>>> include/linux/memory_hotplug.h | 3 +++
> >>>>> mm/memory_hotplug.c | 6 ++++--
> >>>>> 2 files changed, 7 insertions(+), 2 deletions(-)
> >>>>>
> >>>>> diff --git a/include/linux/memory_hotplug.h b/include/linux/memory_hotplug.h
> >>>>> index be48e003a518..25c7f60c317e 100644
> >>>>> --- a/include/linux/memory_hotplug.h
> >>>>> +++ b/include/linux/memory_hotplug.h
> >>>>> @@ -337,6 +337,9 @@ extern void move_pfn_range_to_zone(struct zone *zone, unsigned long start_pfn,
> >>>>> extern void remove_pfn_range_from_zone(struct zone *zone,
> >>>>> unsigned long start_pfn,
> >>>>> unsigned long nr_pages);
> >>>>> +extern void shrink_zone_span(struct zone *zone, unsigned long start_pfn,
> >>>>> + unsigned long end_pfn);
> >>>>> +extern void update_pgdat_span(struct pglist_data *pgdat);
> >>>>> extern bool is_memblock_offlined(struct memory_block *mem);
> >>>>> extern int sparse_add_section(int nid, unsigned long pfn,
> >>>>> unsigned long nr_pages, struct vmem_altmap *altmap);
> >>>>> diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
> >>>>> index 2a9627dc784c..38f46a9ef853 100644
> >>>>> --- a/mm/memory_hotplug.c
> >>>>> +++ b/mm/memory_hotplug.c
> >>>>> @@ -389,7 +389,7 @@ static unsigned long find_biggest_section_pfn(int nid, struct zone *zone,
> >>>>> return 0;
> >>>>> }
> >>>>>
> >>>>> -static void shrink_zone_span(struct zone *zone, unsigned long start_pfn,
> >>>>> +void shrink_zone_span(struct zone *zone, unsigned long start_pfn,
> >>>>> unsigned long end_pfn)
> >>>>> {
> >>>>> unsigned long pfn;
> >>>>> @@ -428,8 +428,9 @@ static void shrink_zone_span(struct zone *zone, unsigned long start_pfn,
> >>>>> }
> >>>>> }
> >>>>> }
> >>>>> +EXPORT_SYMBOL_GPL(shrink_zone_span);
> >>>>
> >>>> Exporting both as symbols feels very wrong. This is memory
> >>>> onlining/offlining internal stuff.
> >>>
> >>> I agree with you that your comment. I will find another approach to avoid
> >>> directly using onlining/offlining internal stuff while updating node/zone span.
> >>
> >> IIRC, to handle what you intend to handle properly want to look into teaching
> >> remove_pfn_range_from_zone() to handle zone_is_zone_device().
> >>
> >> There is a big fat comment:
> >>
> >> /*
> >> * Zone shrinking code cannot properly deal with ZONE_DEVICE. So
> >> * we will not try to shrink the zones - which is okay as
> >> * set_zone_contiguous() cannot deal with ZONE_DEVICE either way.
> >> */
> >> if (zone_is_zone_device(zone))
> >> return;
> >>
> >>
> >> Similarly, try_offline_node() spells this out:
> >>
> >> /*
> >> * If the node still spans pages (especially ZONE_DEVICE), don't
> >> * offline it. A node spans memory after move_pfn_range_to_zone(),
> >> * e.g., after the memory block was onlined.
> >> */
> >> if (pgdat->node_spanned_pages)
> >> return;
> >>
> >>
> >> So once you handle remove_pfn_range_from_zone() cleanly, you'll cleanly handle
> >> try_offline_node() implicitly.
> >>
> >> Trying to update the node span manually without teaching node/zone shrinking code how to
> >> handle ZONE_DEVICE properly is just a hack that will only sometimes work. Especially, it
> >> won't work if the range of interest is still surrounded by other ranges.
> >>
> >
> > Thanks for your pointing out, I missed those comments.
> > I will keep trying to handle node/zone span updating process.
>
> The only safe thing right now for on ZONE_DEVICE in
> remove_pfn_range_from_zone() would be removing the given range from the
> start/end of the zone range, but we must not scan using the existing
> functions.
>
> As soon as we start actual *scanning* via find_smallest...
> find_biggest... in shrink_zone_span() we would mistakenly skip other
> ZONE_DEVICE ranges and mess up.
>
> Assume you would have a ZONE_DEVICE layout like
>
> [ DEV 0 | Hole | DEV 1 | Hole | DEV 2 ]
>
IIUC, you assumed situation that multiple ZONE_DEVICE in single node, and there
are holes among them, right?
> What we actually want to do when removing
>
> * DEV 0 is scanning low->high until we find DEV 1
> * DEV 1 is doing nothing, because we cannot shrink
> * DEV 2 is scanning high -> low until we find DEV 1
>
>
> I assume we'd want to call in shrink_zone_span() two new functions for
> ZONE_DEVICE:
> find_smallest_zone_device_pfn
> find_biggest_zone_device_pfn
>
> Which would be able to do exactly that scanning, eventually, using
> get_dev_pagemap() or some similar source of information.
>
I agree with your suggestion. It might cleanly deal with ZONE_DEVICE with actual
page scanning for checking holes.
> --
> Thanks,
>
> David / dhildenb
>