Variable clk_sel_val is not initialized in the default case of the first switch statement.
In that case, the function should return immediately without any changes to the hardware.
Reported-by: kernel test robot <[email protected]>
Reported-by: Dan Carpenter <[email protected]>
Fixes: b38dd98ff8d0 ("net: stmmac: Add Toshiba Visconti SoCs glue driver")
Signed-off-by: Yuji Ishikawa <[email protected]>
Reviewed-by: Nobuhiro Iwamatsu <[email protected]>
---
drivers/net/ethernet/stmicro/stmmac/dwmac-visconti.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-visconti.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-visconti.c
index dde5b772a..c3f10a92b 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-visconti.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-visconti.c
@@ -49,13 +49,15 @@ struct visconti_eth {
void __iomem *reg;
u32 phy_intf_sel;
struct clk *phy_ref_clk;
+ struct device *dev;
spinlock_t lock; /* lock to protect register update */
};
static void visconti_eth_fix_mac_speed(void *priv, unsigned int speed)
{
struct visconti_eth *dwmac = priv;
- unsigned int val, clk_sel_val;
+ struct net_device *netdev = dev_get_drvdata(dwmac->dev);
+ unsigned int val, clk_sel_val = 0;
unsigned long flags;
spin_lock_irqsave(&dwmac->lock, flags);
@@ -85,7 +87,9 @@ static void visconti_eth_fix_mac_speed(void *priv, unsigned int speed)
break;
default:
/* No bit control */
- break;
+ netdev_err(netdev, "Unsupported speed request (%d)", speed);
+ spin_unlock_irqrestore(&dwmac->lock, flags);
+ return;
}
writel(val, dwmac->reg + MAC_CTRL_REG);
@@ -229,6 +233,7 @@ static int visconti_eth_dwmac_probe(struct platform_device *pdev)
spin_lock_init(&dwmac->lock);
dwmac->reg = stmmac_res.addr;
+ dwmac->dev = &pdev->dev;
plat_dat->bsp_priv = dwmac;
plat_dat->fix_mac_speed = visconti_eth_fix_mac_speed;
--
2.17.1