Add gpio-line-names for the various GPIO's used on Gateworks Venice
boards. Note that these GPIO's are typically 'configured' in Boot
Firmware via gpio-hog therefore we only configure line names to keep the
boot firmware configuration from changing on kernel init.
Signed-off-by: Tim Harvey <[email protected]>
---
.../dts/freescale/imx8mm-venice-gw71xx.dtsi | 14 +++++++
.../dts/freescale/imx8mm-venice-gw72xx.dtsi | 16 ++++++++
.../dts/freescale/imx8mm-venice-gw73xx.dtsi | 16 ++++++++
.../dts/freescale/imx8mm-venice-gw7901.dts | 23 +++++++++++
.../dts/freescale/imx8mm-venice-gw7902.dts | 39 ++++++++++++++++++-
.../dts/freescale/imx8mn-venice-gw7902.dts | 39 ++++++++++++++++++-
6 files changed, 145 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi
index 506335efc391..73addc0b8e57 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi
@@ -68,6 +68,20 @@
status = "okay";
};
+&gpio1 {
+ gpio-line-names = "", "", "", "", "", "", "pci_usb_sel", "dio0",
+ "", "dio1", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "";
+};
+
+&gpio4 {
+ gpio-line-names = "", "", "", "dio2", "dio3", "", "", "pci_wdis#",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "";
+};
+
&i2c2 {
clock-frequency = <400000>;
pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi
index 72a3a3aa8fcd..1e7badb2a82e 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi
@@ -88,6 +88,22 @@
status = "okay";
};
+&gpio1 {
+ gpio-line-names = "rs485_term", "mipi_gpio4", "", "",
+ "", "", "pci_usb_sel", "dio0",
+ "", "dio1", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "";
+};
+
+&gpio4 {
+ gpio-line-names = "rs485_en", "mipi_gpio3", "rs485_hd", "mipi_gpio2",
+ "mipi_gpio1", "", "", "pci_wdis#",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "";
+};
+
&i2c2 {
clock-frequency = <400000>;
pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi
index 7b00b6b5bb38..426483ec1f88 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi
@@ -108,6 +108,22 @@
status = "okay";
};
+&gpio1 {
+ gpio-line-names = "rs485_term", "mipi_gpio4", "", "",
+ "", "", "pci_usb_sel", "dio0",
+ "", "dio1", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "";
+};
+
+&gpio4 {
+ gpio-line-names = "rs485_en", "mipi_gpio3", "rs485_hd", "mipi_gpio2",
+ "mipi_gpio1", "", "", "pci_wdis#",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "";
+};
+
&i2c2 {
clock-frequency = <400000>;
pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
index 4bf2b97b3ef5..8710586a1d8f 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
@@ -293,6 +293,29 @@
};
};
+&gpio1 {
+ gpio-line-names = "uart1_rs422#", "", "", "uart1_rs485#",
+ "", "uart1_rs232#", "dig1_in", "dig1_out",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "";
+};
+
+&gpio4 {
+ gpio-line-names = "", "", "", "",
+ "", "", "uart3_rs232#", "uart3_rs422#",
+ "uart3_rs485#", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "uart4_rs485#", "", "sim1det#", "sim2det#", "";
+};
+
+&gpio5 {
+ gpio-line-names = "", "", "", "dig2_out", "dig2_in", "sim2sel", "", "",
+ "", "", "uart4_rs232#", "", "", "uart4_rs422#", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "";
+};
+
&gpu_2d {
status = "disabled";
};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts
index 1b2aaf299b24..edf0c7aaaef0 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts
@@ -260,6 +260,43 @@
};
};
+&gpio1 {
+ gpio-line-names = "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "m2_reset", "", "m2_wdis#",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "";
+};
+
+&gpio2 {
+ gpio-line-names = "", "", "", "", "", "", "", "",
+ "uart2_en#", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "";
+};
+
+&gpio3 {
+ gpio-line-names = "", "m2_gdis#", "", "", "", "", "", "m2_off#",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "";
+};
+
+&gpio4 {
+ gpio-line-names = "", "", "", "", "", "", "", "",
+ "", "", "", "amp_gpio3", "amp_gpio2", "", "amp_gpio1", "",
+ "", "", "", "", "amp_gpio4", "app_gpio1", "", "uart1_rs485",
+ "", "uart1_term", "uart1_half", "app_gpio2",
+ "mipi_gpio1", "", "", "";
+};
+
+&gpio5 {
+ gpio-line-names = "", "", "", "mipi_gpio4",
+ "mipi_gpio3", "mipi_gpio2", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "";
+};
+
&i2c1 {
clock-frequency = <100000>;
pinctrl-names = "default";
@@ -691,7 +728,7 @@
pinctrl_hog: hoggrp {
fsl,pins = <
MX8MM_IOMUXC_NAND_CE0_B_GPIO3_IO1 0x40000159 /* M2_GDIS# */
- MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x40000041 /* M2_RST# */
+ MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x40000041 /* M2_RESET */
MX8MM_IOMUXC_NAND_DATA01_GPIO3_IO7 0x40000119 /* M2_OFF# */
MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x40000159 /* M2_WDIS# */
MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14 0x40000041 /* AMP GPIO1 */
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts b/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts
index 2d58005d20e4..3c0e63d2e82d 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts
@@ -255,6 +255,43 @@
};
};
+&gpio1 {
+ gpio-line-names = "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "m2_reset", "", "m2_wdis#",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "";
+};
+
+&gpio2 {
+ gpio-line-names = "", "", "", "", "", "", "", "",
+ "uart2_en#", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "";
+};
+
+&gpio3 {
+ gpio-line-names = "", "m2_gdis#", "", "", "", "", "", "m2_off#",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "";
+};
+
+&gpio4 {
+ gpio-line-names = "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "app_gpio1", "", "uart1_rs485",
+ "", "uart1_term", "uart1_half", "app_gpio2",
+ "mipi_gpio1", "", "", "";
+};
+
+&gpio5 {
+ gpio-line-names = "", "", "", "mipi_gpio4",
+ "mipi_gpio3", "mipi_gpio2", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "";
+};
+
&gpu {
status = "disabled";
};
@@ -645,7 +682,7 @@
pinctrl_hog: hoggrp {
fsl,pins = <
MX8MN_IOMUXC_NAND_CE0_B_GPIO3_IO1 0x40000159 /* M2_GDIS# */
- MX8MN_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x40000041 /* M2_RST# */
+ MX8MN_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x40000041 /* M2_RESET */
MX8MN_IOMUXC_NAND_DATA01_GPIO3_IO7 0x40000119 /* M2_OFF# */
MX8MN_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x40000159 /* M2_WDIS# */
MX8MN_IOMUXC_SAI2_RXFS_GPIO4_IO21 0x40000041 /* APP GPIO1 */
--
2.17.1
On Tue, Dec 14, 2021 at 04:18:12PM -0800, Tim Harvey wrote:
> Add gpio-line-names for the various GPIO's used on Gateworks Venice
> boards. Note that these GPIO's are typically 'configured' in Boot
> Firmware via gpio-hog therefore we only configure line names to keep the
> boot firmware configuration from changing on kernel init.
>
> Signed-off-by: Tim Harvey <[email protected]>
It doesn't apply to my imx/dt64 branch. Could you rebase?
Shawn
On Wed, Jan 26, 2022 at 1:07 AM Shawn Guo <[email protected]> wrote:
>
> On Tue, Dec 14, 2021 at 04:18:12PM -0800, Tim Harvey wrote:
> > Add gpio-line-names for the various GPIO's used on Gateworks Venice
> > boards. Note that these GPIO's are typically 'configured' in Boot
> > Firmware via gpio-hog therefore we only configure line names to keep the
> > boot firmware configuration from changing on kernel init.
> >
> > Signed-off-by: Tim Harvey <[email protected]>
>
> It doesn't apply to my imx/dt64 branch. Could you rebase?
>
Shawn,
Sure, I'll try to submit another version within a couple of days.
Did you happen to see 'arm64: dts: imx8mm-venice*: add PCIe support'
[1]? It seems to have been archived for some reason and it may have to
be rebased after I re-post this one unless you can take that now.
Best Regards,
Tim
[1] - https://patchwork.kernel.org/project/linux-arm-kernel/patch/[email protected]/
On Thu, Jan 27, 2022 at 02:49:41PM -0800, Tim Harvey wrote:
> On Wed, Jan 26, 2022 at 1:07 AM Shawn Guo <[email protected]> wrote:
> >
> > On Tue, Dec 14, 2021 at 04:18:12PM -0800, Tim Harvey wrote:
> > > Add gpio-line-names for the various GPIO's used on Gateworks Venice
> > > boards. Note that these GPIO's are typically 'configured' in Boot
> > > Firmware via gpio-hog therefore we only configure line names to keep the
> > > boot firmware configuration from changing on kernel init.
> > >
> > > Signed-off-by: Tim Harvey <[email protected]>
> >
> > It doesn't apply to my imx/dt64 branch. Could you rebase?
> >
>
> Shawn,
>
> Sure, I'll try to submit another version within a couple of days.
>
> Did you happen to see 'arm64: dts: imx8mm-venice*: add PCIe support'
> [1]? It seems to have been archived for some reason and it may have to
> be rebased after I re-post this one unless you can take that now.
I forgot to reply, but I had already pick that up.
Shawn