2022-01-18 03:04:28

by Hugo Villeneuve

Subject: [PATCH] arm64: dts: imx8mp-evk: add PCA6416 interrupt controller mode

From: Hugo Villeneuve <[email protected]>

Add interrupt controller mode for the pca6416 on i.MX8MP EVK board's.

Signed-off-by: Hugo Villeneuve <[email protected]>
---
arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 12 ++++++++++++
1 file changed, 12 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
index 66437b659f3a..00e1e1342162 100755
--- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
@@ -526,6 +526,12 @@ pca6416: gpio@20 {
reg = <0x20>;
gpio-controller;
#gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pca6416_int>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
};

codec: wm8960@1a {
@@ -1209,6 +1215,12 @@ pinctrl_csi_mclk: csi_mclk_grp {
MX8MP_IOMUXC_GPIO1_IO15__CCM_CLKO2 0x59
>;
};
+
+ pinctrl_pca6416_int: pca6416_int_grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12 0x146 /* Input pull-up. */
+ >;
+ };
};

&vpu_g1 {
--
2.30.2

2022-01-31 23:07:08

by Shawn Guo

Subject: Re: [PATCH] arm64: dts: imx8mp-evk: add PCA6416 interrupt controller mode

On Mon, Jan 17, 2022 at 06:06:39PM -0500, Hugo Villeneuve wrote:
> From: Hugo Villeneuve <[email protected]>
>
> Add interrupt controller mode for the pca6416 on i.MX8MP EVK board's.
>
> Signed-off-by: Hugo Villeneuve <[email protected]>

It doesn't apply to my branch. Could you rebase?

Shawn

> ---
> arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> index 66437b659f3a..00e1e1342162 100755
> --- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
> @@ -526,6 +526,12 @@ pca6416: gpio@20 {
> reg = <0x20>;
> gpio-controller;
> #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pca6416_int>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
> };
>
> codec: wm8960@1a {
> @@ -1209,6 +1215,12 @@ pinctrl_csi_mclk: csi_mclk_grp {
> MX8MP_IOMUXC_GPIO1_IO15__CCM_CLKO2 0x59
> >;
> };
> +
> + pinctrl_pca6416_int: pca6416_int_grp {
> + fsl,pins = <
> + MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12 0x146 /* Input pull-up. */
> + >;
> + };
> };
>
> &vpu_g1 {
> --
> 2.30.2
>

2022-02-01 08:44:06

by Hugo Villeneuve

Subject: [PATCH v2] arm64: dts: imx8mp-evk: add PCA6416 interrupt controller mode

From: Hugo Villeneuve <[email protected]>

Add interrupt controller mode for the pca6416 on i.MX8MP EVK board's.

Signed-off-by: Hugo Villeneuve <[email protected]>
---

Rebased on tree: git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git
branch: for-next

arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 12 ++++++++++++
1 file changed, 12 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
index 2eb943210678..9055ce32aecc 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
@@ -294,6 +294,12 @@ pca6416: gpio@20 {
reg = <0x20>;
gpio-controller;
#gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pca6416_int>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
};
};

@@ -448,6 +454,12 @@ MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03 0x000001c0
>;
};

+ pinctrl_pca6416_int: pca6416_int_grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12 0x146 /* Input pull-up. */
+ >;
+ };
+
pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
fsl,pins = <
MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x41
--
2.30.2

2022-02-11 09:40:04

by Shawn Guo

Subject: Re: [PATCH v2] arm64: dts: imx8mp-evk: add PCA6416 interrupt controller mode

On Sat, Jan 29, 2022 at 03:26:17PM -0500, Hugo Villeneuve wrote:
> From: Hugo Villeneuve <[email protected]>
>
> Add interrupt controller mode for the pca6416 on i.MX8MP EVK board's.
>
> Signed-off-by: Hugo Villeneuve <[email protected]>

Applied, thanks!