2022-02-01 16:17:59

by Oleksij Rempel

[permalink] [raw]
Subject: [PATCH v2 2/5] ARM: dts: imx6dl-prtvt7: Add missing tvp5150 video decoder node

From: Robin van der Gracht <[email protected]>

Signed-off-by: Robin van der Gracht <[email protected]>
---
arch/arm/boot/dts/imx6dl-prtvt7.dts | 42 +++++++++++++++++++++++++++++
1 file changed, 42 insertions(+)

diff --git a/arch/arm/boot/dts/imx6dl-prtvt7.dts b/arch/arm/boot/dts/imx6dl-prtvt7.dts
index be7c4cb339e7..baaa6ffc4df9 100644
--- a/arch/arm/boot/dts/imx6dl-prtvt7.dts
+++ b/arch/arm/boot/dts/imx6dl-prtvt7.dts
@@ -6,6 +6,7 @@
/dts-v1/;
#include "imx6dl.dtsi"
#include "imx6qdl-prti6q.dtsi"
+#include <dt-bindings/display/sdtv-standards.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/sound/fsl-imx-audmux.h>
@@ -171,6 +172,18 @@ panel_in: endpoint {
};
};

+ connector {
+ compatible = "composite-video-connector";
+ label = "Composite0";
+ sdtv-standards = <SDTV_STD_PAL_B>;
+
+ port {
+ comp0_out: endpoint {
+ remote-endpoint = <&tvp5150_comp0_in>;
+ };
+ };
+ };
+
reg_bl_12v0: regulator-bl-12v0 {
compatible = "regulator-fixed";
pinctrl-names = "default";
@@ -295,6 +308,31 @@ sgtl5000: audio-codec@a {
VDDIO-supply = <&reg_3v3>;
VDDD-supply = <&reg_1v8>;
};
+
+ video@5c {
+ compatible = "ti,tvp5150";
+ reg = <0x5c>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ tvp5150_comp0_in: endpoint {
+ remote-endpoint = <&comp0_out>;
+ };
+ };
+
+ /* Output port 2 is video output pad */
+ port@2 {
+ reg = <2>;
+
+ tvp5151_to_ipu1_csi0_mux: endpoint {
+ remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
+ };
+ };
+ };
};

&i2c3 {
@@ -322,6 +360,10 @@ &ipu1_di0_disp0 {
remote-endpoint = <&display_in>;
};

+&ipu1_csi0_mux_from_parallel_sensor {
+ remote-endpoint = <&tvp5151_to_ipu1_csi0_mux>;
+};
+
&pwm1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm1>;
--
2.30.2


2022-02-13 05:06:36

by Shawn Guo

[permalink] [raw]
Subject: Re: [PATCH v2 2/5] ARM: dts: imx6dl-prtvt7: Add missing tvp5150 video decoder node

On Mon, Jan 31, 2022 at 11:28:38AM +0100, Oleksij Rempel wrote:
> From: Robin van der Gracht <[email protected]>
>
> Signed-off-by: Robin van der Gracht <[email protected]>

Please write up some commit log. Also your SoB is missing.

Shawn

> ---
> arch/arm/boot/dts/imx6dl-prtvt7.dts | 42 +++++++++++++++++++++++++++++
> 1 file changed, 42 insertions(+)
>
> diff --git a/arch/arm/boot/dts/imx6dl-prtvt7.dts b/arch/arm/boot/dts/imx6dl-prtvt7.dts
> index be7c4cb339e7..baaa6ffc4df9 100644
> --- a/arch/arm/boot/dts/imx6dl-prtvt7.dts
> +++ b/arch/arm/boot/dts/imx6dl-prtvt7.dts
> @@ -6,6 +6,7 @@
> /dts-v1/;
> #include "imx6dl.dtsi"
> #include "imx6qdl-prti6q.dtsi"
> +#include <dt-bindings/display/sdtv-standards.h>
> #include <dt-bindings/input/input.h>
> #include <dt-bindings/leds/common.h>
> #include <dt-bindings/sound/fsl-imx-audmux.h>
> @@ -171,6 +172,18 @@ panel_in: endpoint {
> };
> };
>
> + connector {
> + compatible = "composite-video-connector";
> + label = "Composite0";
> + sdtv-standards = <SDTV_STD_PAL_B>;
> +
> + port {
> + comp0_out: endpoint {
> + remote-endpoint = <&tvp5150_comp0_in>;
> + };
> + };
> + };
> +
> reg_bl_12v0: regulator-bl-12v0 {
> compatible = "regulator-fixed";
> pinctrl-names = "default";
> @@ -295,6 +308,31 @@ sgtl5000: audio-codec@a {
> VDDIO-supply = <&reg_3v3>;
> VDDD-supply = <&reg_1v8>;
> };
> +
> + video@5c {
> + compatible = "ti,tvp5150";
> + reg = <0x5c>;
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> +
> + tvp5150_comp0_in: endpoint {
> + remote-endpoint = <&comp0_out>;
> + };
> + };
> +
> + /* Output port 2 is video output pad */
> + port@2 {
> + reg = <2>;
> +
> + tvp5151_to_ipu1_csi0_mux: endpoint {
> + remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
> + };
> + };
> + };
> };
>
> &i2c3 {
> @@ -322,6 +360,10 @@ &ipu1_di0_disp0 {
> remote-endpoint = <&display_in>;
> };
>
> +&ipu1_csi0_mux_from_parallel_sensor {
> + remote-endpoint = <&tvp5151_to_ipu1_csi0_mux>;
> +};
> +
> &pwm1 {
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_pwm1>;
> --
> 2.30.2
>