Introduce the dt-bindings documentation for bcm2835 CCP2/CSI2 Unicam
camera interface. Also add a MAINTAINERS entry for it.
Signed-off-by: Dave Stevenson <[email protected]>
Signed-off-by: Naushir Patuck <[email protected]>
Signed-off-by: Jean-Michel Hautbois <[email protected]>
---
Dave: I assumed you were the maintainer for this file, as I based it on the
bcm2835-unicam.txt file. Are you happy to be added directly as the
maintainer, or should this be specified as "Raspberry Pi Kernel
Maintenance <[email protected]>"
---
.../bindings/media/brcm,bcm2835-unicam.yaml | 107 ++++++++++++++++++
MAINTAINERS | 7 ++
2 files changed, 114 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/brcm,bcm2835-unicam.yaml
diff --git a/Documentation/devicetree/bindings/media/brcm,bcm2835-unicam.yaml b/Documentation/devicetree/bindings/media/brcm,bcm2835-unicam.yaml
new file mode 100644
index 000000000000..5bf41a8834fa
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/brcm,bcm2835-unicam.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/brcm,bcm2835-unicam.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM283x Camera Interface (Unicam)
+
+maintainers:
+ - Dave Stevenson <[email protected]>
+
+description: |-
+ The Unicam block on BCM283x SoCs is the receiver for either
+ CSI-2 or CCP2 data from image sensors or similar devices.
+
+ The main platform using this SoC is the Raspberry Pi family of boards.
+ On the Pi the VideoCore firmware can also control this hardware block,
+ and driving it from two different processors will cause issues.
+ To avoid this, the firmware checks the device tree configuration
+ during boot. If it finds device tree nodes starting by csi then
+ it will stop the firmware accessing the block, and it can then
+ safely be used via the device tree binding.
+
+properties:
+ compatible:
+ const: brcm,bcm2835-unicam
+
+ reg:
+ maxItems: 2
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: Clock for the camera.
+ - description: Clock for the vpu.
+
+ clock-names:
+ items:
+ - const: lp
+ - const: vpu
+
+ power-domains:
+ items:
+ - description: Unicam power domain
+
+ num-data-lanes:
+ items:
+ - enum: [ 2, 4 ]
+
+ port:
+ additionalProperties: false
+ $ref: /schemas/graph.yaml#/$defs/port-base
+
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ data-lanes: true
+ link-frequencies: true
+
+ required:
+ - data-lanes
+ - link-frequencies
+
+ required:
+ - endpoint
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - power-domains
+ - num-data-lanes
+ - port
+
+additionalProperties: False
+
+examples:
+ - |
+ #include <dt-bindings/clock/bcm2835.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/power/raspberrypi-power.h>
+ csi1: csi@7e801000 {
+ compatible = "brcm,bcm2835-unicam";
+ reg = <0x7e801000 0x800>,
+ <0x7e802004 0x4>;
+ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clocks BCM2835_CLOCK_CAM1>,
+ <&firmware_clocks 4>;
+ clock-names = "lp", "vpu";
+ power-domains = <&power RPI_POWER_DOMAIN_UNICAM1>;
+ num-data-lanes = <2>;
+ port {
+ csi1_ep: endpoint {
+ remote-endpoint = <&imx219_0>;
+ data-lanes = <1 2>;
+ link-frequencies = /bits/ 64 <456000000>;
+ };
+ };
+ };
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index a0770a861ca4..29344ea86847 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3670,6 +3670,13 @@ N: bcm113*
N: bcm216*
N: kona
+BROADCOM BCM2835 CAMERA DRIVER
+M: Raspberry Pi Kernel Maintenance <[email protected]>
+L: [email protected]
+S: Maintained
+F: Documentation/devicetree/bindings/media/brcm,bcm2835-unicam.yaml
+F: arch/arm/boot/dts/bcm283x*
+
BROADCOM BCM47XX MIPS ARCHITECTURE
M: Hauke Mehrtens <[email protected]>
M: Rafał Miłecki <[email protected]>
--
2.32.0
Hi Jean-Michel,
please drop the first "media:" before dt-bindings.
Am 02.02.22 um 18:56 schrieb Jean-Michel Hautbois:
> Introduce the dt-bindings documentation for bcm2835 CCP2/CSI2 Unicam
> camera interface. Also add a MAINTAINERS entry for it.
>
> Signed-off-by: Dave Stevenson <[email protected]>
> Signed-off-by: Naushir Patuck <[email protected]>
> Signed-off-by: Jean-Michel Hautbois <[email protected]>
> ---
> Dave: I assumed you were the maintainer for this file, as I based it on the
> bcm2835-unicam.txt file. Are you happy to be added directly as the
> maintainer, or should this be specified as "Raspberry Pi Kernel
> Maintenance <[email protected]>"
> ---
> .../bindings/media/brcm,bcm2835-unicam.yaml | 107 ++++++++++++++++++
> MAINTAINERS | 7 ++
> 2 files changed, 114 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/brcm,bcm2835-unicam.yaml
>
> diff --git a/Documentation/devicetree/bindings/media/brcm,bcm2835-unicam.yaml b/Documentation/devicetree/bindings/media/brcm,bcm2835-unicam.yaml
> new file mode 100644
> index 000000000000..5bf41a8834fa
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/brcm,bcm2835-unicam.yaml
> @@ -0,0 +1,107 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/brcm,bcm2835-unicam.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Broadcom BCM283x Camera Interface (Unicam)
> +
> +maintainers:
> + - Dave Stevenson <[email protected]>
> +
> +description: |-
> + The Unicam block on BCM283x SoCs is the receiver for either
> + CSI-2 or CCP2 data from image sensors or similar devices.
> +
> + The main platform using this SoC is the Raspberry Pi family of boards.
> + On the Pi the VideoCore firmware can also control this hardware block,
> + and driving it from two different processors will cause issues.
> + To avoid this, the firmware checks the device tree configuration
> + during boot. If it finds device tree nodes starting by csi then
> + it will stop the firmware accessing the block, and it can then
> + safely be used via the device tree binding.
> +
> +properties:
> + compatible:
> + const: brcm,bcm2835-unicam
> +
> + reg:
> + maxItems: 2
I would be nice to have reg-names here similar to the clocks.
> +
> + interrupts:
> + maxItems: 1
> +
> + clocks:
> + items:
> + - description: Clock for the camera.
> + - description: Clock for the vpu.
> +
> + clock-names:
> + items:
> + - const: lp
> + - const: vpu
> +
> + power-domains:
> + items:
> + - description: Unicam power domain
> +
> + num-data-lanes:
> + items:
> + - enum: [ 2, 4 ]
> +
> + port:
> + additionalProperties: false
> + $ref: /schemas/graph.yaml#/$defs/port-base
> +
> + properties:
> + endpoint:
> + $ref: /schemas/media/video-interfaces.yaml#
> + unevaluatedProperties: false
> +
> + properties:
> + data-lanes: true
> + link-frequencies: true
> +
> + required:
> + - data-lanes
> + - link-frequencies
> +
> + required:
> + - endpoint
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - clocks
> + - clock-names
> + - power-domains
> + - num-data-lanes
> + - port
> +
> +additionalProperties: False
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/bcm2835.h>
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/power/raspberrypi-power.h>
> + csi1: csi@7e801000 {
> + compatible = "brcm,bcm2835-unicam";
> + reg = <0x7e801000 0x800>,
> + <0x7e802004 0x4>;
> + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clocks BCM2835_CLOCK_CAM1>,
> + <&firmware_clocks 4>;
> + clock-names = "lp", "vpu";
> + power-domains = <&power RPI_POWER_DOMAIN_UNICAM1>;
> + num-data-lanes = <2>;
> + port {
> + csi1_ep: endpoint {
> + remote-endpoint = <&imx219_0>;
> + data-lanes = <1 2>;
> + link-frequencies = /bits/ 64 <456000000>;
> + };
> + };
> + };
> +...
> diff --git a/MAINTAINERS b/MAINTAINERS
> index a0770a861ca4..29344ea86847 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -3670,6 +3670,13 @@ N: bcm113*
> N: bcm216*
> N: kona
>
> +BROADCOM BCM2835 CAMERA DRIVER
> +M: Raspberry Pi Kernel Maintenance <[email protected]>
> +L: [email protected]
> +S: Maintained
> +F: Documentation/devicetree/bindings/media/brcm,bcm2835-unicam.yaml
> +F: arch/arm/boot/dts/bcm283x*
> +
I suggest to make the MAINTAINERS changes a single separate patch
instead of small incremental changes.
Best regards
> BROADCOM BCM47XX MIPS ARCHITECTURE
> M: Hauke Mehrtens <[email protected]>
> M: Rafał Miłecki <[email protected]>