From: Keerthy <[email protected]>
The interrupt-parent for wkup_gpioX instances are wrongly assigned as
main_gpio_intr instead of wkup_gpio_intr. Fix it.
Fixes: b8545f9d3a54 ("arm64: dts: ti: Add initial support for J721S2 SoC")
Signed-off-by: Keerthy <[email protected]>
Signed-off-by: Aswath Govindraju <[email protected]>
---
arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
index 7521963719ff..6c5c02edb375 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
@@ -108,7 +108,7 @@
reg = <0x00 0x42110000 0x00 0x100>;
gpio-controller;
#gpio-cells = <2>;
- interrupt-parent = <&main_gpio_intr>;
+ interrupt-parent = <&wkup_gpio_intr>;
interrupts = <103>, <104>, <105>, <106>, <107>, <108>;
interrupt-controller;
#interrupt-cells = <2>;
@@ -124,7 +124,7 @@
reg = <0x00 0x42100000 0x00 0x100>;
gpio-controller;
#gpio-cells = <2>;
- interrupt-parent = <&main_gpio_intr>;
+ interrupt-parent = <&wkup_gpio_intr>;
interrupts = <112>, <113>, <114>, <115>, <116>, <117>;
interrupt-controller;
#interrupt-cells = <2>;
--
2.17.1
On 03/02/22 6:56 pm, Aswath Govindraju wrote:
> From: Keerthy <[email protected]>
>
> The interrupt-parent for wkup_gpioX instances are wrongly assigned as
> main_gpio_intr instead of wkup_gpio_intr. Fix it.
>
> Fixes: b8545f9d3a54 ("arm64: dts: ti: Add initial support for J721S2 SoC")
> Signed-off-by: Keerthy <[email protected]>
> Signed-off-by: Aswath Govindraju <[email protected]>
Reviewed-by: Kishon Vijay Abraham I <[email protected]>
> ---
> arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
> index 7521963719ff..6c5c02edb375 100644
> --- a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
> @@ -108,7 +108,7 @@
> reg = <0x00 0x42110000 0x00 0x100>;
> gpio-controller;
> #gpio-cells = <2>;
> - interrupt-parent = <&main_gpio_intr>;
> + interrupt-parent = <&wkup_gpio_intr>;
> interrupts = <103>, <104>, <105>, <106>, <107>, <108>;
> interrupt-controller;
> #interrupt-cells = <2>;
> @@ -124,7 +124,7 @@
> reg = <0x00 0x42100000 0x00 0x100>;
> gpio-controller;
> #gpio-cells = <2>;
> - interrupt-parent = <&main_gpio_intr>;
> + interrupt-parent = <&wkup_gpio_intr>;
> interrupts = <112>, <113>, <114>, <115>, <116>, <117>;
> interrupt-controller;
> #interrupt-cells = <2>;
>
Hi Aswath Govindraju,
On Thu, 3 Feb 2022 18:56:47 +0530, Aswath Govindraju wrote:
> From: Keerthy <[email protected]>
>
> The interrupt-parent for wkup_gpioX instances are wrongly assigned as
> main_gpio_intr instead of wkup_gpio_intr. Fix it.
>
>
I have applied the following to branch ti-k3-dts-next on [1].
Thank you!
[1/1] arm64: dts: ti: k3-j721s2-mcu-wakeup: Fix the interrupt-parent for wkup_gpioX instances
commit: 223d9ac45efb9311e7b2b0494c3ed25c701c6a5d
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent up the chain during
the next merge window (or sooner if it is a relevant bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
[1] git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git
--
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D