Specifying partitions directly in the flash node is deprecated, a
fixed-partitions node should be used instead. Therefore, it doesn't make
sense to have these properties in the flash nodes.
Acked-by: Jan Kiszka <[email protected]>
Signed-off-by: Matthias Schiffer <[email protected]>
---
arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi | 2 --
arch/arm64/boot/dts/ti/k3-am654-base-board.dts | 8 ++------
2 files changed, 2 insertions(+), 8 deletions(-)
v2: no changes, added Jan's Acked-by
diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
index 873c123c611ed..7eca697e1ca14 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
@@ -623,8 +623,6 @@ flash@0 {
cdns,tchsh-ns = <60>;
cdns,tslch-ns = <60>;
cdns,read-delay = <2>;
- #address-cells = <1>;
- #size-cells = <1>;
};
};
diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
index 821ee7f2eff04..9c06da9d6d8f7 100644
--- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
@@ -340,14 +340,12 @@ &main_spi0 {
ti,pindir-d0-out-d1-in;
status = "okay";
- flash@0{
+ flash@0 {
compatible = "jedec,spi-nor";
reg = <0x0>;
spi-tx-bus-width = <1>;
spi-rx-bus-width = <1>;
spi-max-frequency = <48000000>;
- #address-cells = <1>;
- #size-cells= <1>;
};
};
@@ -442,7 +440,7 @@ &ospi0 {
pinctrl-0 = <&mcu_fss0_ospi0_pins_default>;
status = "okay";
- flash@0{
+ flash@0 {
compatible = "jedec,spi-nor";
reg = <0x0>;
spi-tx-bus-width = <8>;
@@ -453,8 +451,6 @@ flash@0{
cdns,tchsh-ns = <60>;
cdns,tslch-ns = <60>;
cdns,read-delay = <0>;
- #address-cells = <1>;
- #size-cells = <1>;
};
};
--
2.25.1