Per TAS2770 datasheet there must be a 1 ms delay from reset to first
command. So insert delays into the driver where appropriate.
Fixes: 1a476abc723e ("tas2770: add tas2770 smart PA kernel driver")
Signed-off-by: Martin Povišer <[email protected]>
---
In previous submission of this patch some people got their copy
encrypted. That was by accident, pardon that. I have changed my email
provider since.
v1: https://lore.kernel.org/alsa-devel/[email protected]/
sound/soc/codecs/tas2770.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/sound/soc/codecs/tas2770.c b/sound/soc/codecs/tas2770.c
index b52c0861edc8..b397a2122dd4 100644
--- a/sound/soc/codecs/tas2770.c
+++ b/sound/soc/codecs/tas2770.c
@@ -38,10 +38,12 @@ static void tas2770_reset(struct tas2770_priv *tas2770)
gpiod_set_value_cansleep(tas2770->reset_gpio, 0);
msleep(20);
gpiod_set_value_cansleep(tas2770->reset_gpio, 1);
+ usleep_range(1000, 2000);
}
snd_soc_component_write(tas2770->component, TAS2770_SW_RST,
TAS2770_RST);
+ usleep_range(1000, 2000);
}
static int tas2770_set_bias_level(struct snd_soc_component *component,
@@ -110,6 +112,7 @@ static int tas2770_codec_resume(struct snd_soc_component *component)
if (tas2770->sdz_gpio) {
gpiod_set_value_cansleep(tas2770->sdz_gpio, 1);
+ usleep_range(1000, 2000);
} else {
ret = snd_soc_component_update_bits(component, TAS2770_PWR_CTRL,
TAS2770_PWR_CTRL_MASK,
@@ -529,8 +532,10 @@ static int tas2770_codec_probe(struct snd_soc_component *component)
tas2770->component = component;
- if (tas2770->sdz_gpio)
+ if (tas2770->sdz_gpio) {
gpiod_set_value_cansleep(tas2770->sdz_gpio, 1);
+ usleep_range(1000, 2000);
+ }
tas2770_reset(tas2770);
--
2.33.0