2022-02-07 13:12:37

by Mauri Sandberg

[permalink] [raw]
Subject: [RESEND v8 0/2] gpio: gpio-cascade: add generic GPIO cascade

Hello all,

Hopefully I am reaching Bartosz with this too now. I may have used an
outdated e-mail address earlier. Please kindly take these two pathces
in consideration.

Thanks,
Mauri

Mauri Sandberg (2):
dt-bindings: gpio-cascade: add documentation
gpio: gpio-cascade: add generic GPIO cascade

.../bindings/gpio/gpio-cascade.yaml | 103 +++++++++++++++
drivers/gpio/Kconfig | 15 +++
drivers/gpio/Makefile | 1 +
drivers/gpio/gpio-cascade.c | 117 ++++++++++++++++++
4 files changed, 236 insertions(+)
create mode 100644 Documentation/devicetree/bindings/gpio/gpio-cascade.yaml
create mode 100644 drivers/gpio/gpio-cascade.c


base-commit: 0868ad385affa28cf15aebca3c38c5c51f79b286
--
2.25.1


2022-02-07 14:51:53

by Mauri Sandberg

[permalink] [raw]
Subject: [RESEND v8 2/2] gpio: gpio-cascade: add generic GPIO cascade

Adds support for building cascades of GPIO lines. That is, it allows
setups when there is one upstream line and multiple cascaded lines, out
of which one can be chosen at a time. The status of the upstream line
can be conveyed to the selected cascaded line or, vice versa, the status
of the cascaded line can be conveyed to the upstream line.

A multiplexer is being used to select, which cascaded GPIO line is being
used at any given time.

At the moment only input direction is supported. In future it should be
possible to add support for output direction, too.

Signed-off-by: Mauri Sandberg <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
---
v7 -> v8:
- rearrange members in struct gpio_cascade
- cosmetic changes in file header and in one function declaration
- added Reviewed-by tags by Linus and Andy
v6 -> v7:
- In Kconfig add info about module name
- adhere to new convention that allows lines longer than 80 chars
- use dev_probe_err with upstream gpio line too
- refactor for cleaner exit of probe function.
v5 -> v6:
- In Kconfig, remove dependency to OF_GPIO and select only MULTIPLEXER
- refactor code preferring one-liners
- clean up prints, removing them from success-path.
- don't explicitly set gpio_chip.of_node as it's done in the GPIO library
- use devm_gpiochip_add_data instead of gpiochip_add
v4 -> v5:
- renamed gpio-mux-input -> gpio-cascade. refactored code accordingly
here and there and changed to use new bindings and compatible string
- ambigious and vague 'pin' was rename to 'upstream_line'
- dropped Tested-by and Reviewed-by due to changes in bindings
- dropped Reported-by suggested by an automatic bot as it was not really
appropriate to begin with
- functionally it's the same as v4
v3 -> v4:
- Changed author email
- Included Tested-by and Reviewed-by from Drew
v2 -> v3:
- use managed device resources
- update Kconfig description
v1 -> v2:
- removed .owner from platform_driver as per test bot's instruction
- added MODULE_AUTHOR, MODULE_DESCRIPTION, MODULE_LICENSE
- added gpio_mux_input_get_direction as it's recommended for all chips
- removed because this is input only chip: gpio_mux_input_set_value
- removed because they are not needed for input/output only chips:
gpio_mux_input_direction_input
gpio_mux_input_direction_output
- fixed typo in an error message
- added info message about successful registration
- removed can_sleep flag as this does not sleep while getting GPIO value
like I2C or SPI do
- Updated description in Kconfig
---
drivers/gpio/Kconfig | 15 +++++
drivers/gpio/Makefile | 1 +
drivers/gpio/gpio-cascade.c | 117 ++++++++++++++++++++++++++++++++++++
3 files changed, 133 insertions(+)
create mode 100644 drivers/gpio/gpio-cascade.c

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 2031a727be30..b9201d29a2d2 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -1701,4 +1701,19 @@ config GPIO_SIM

endmenu

+comment "Other GPIO expanders"
+
+config GPIO_CASCADE
+ tristate "General GPIO cascade"
+ select MULTIPLEXER
+ help
+ Say yes here to enable support for generic GPIO cascade.
+
+ This allows building one-to-many cascades of GPIO lines using
+ different types of multiplexers readily available. At the
+ moment only input lines are supported.
+
+ To build the driver as a module choose 'm' and the resulting module
+ will be called 'gpio-cascade'.
+
endif
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 1a14e248bdbd..6cb0e5c42fc5 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -44,6 +44,7 @@ obj-$(CONFIG_GPIO_BD9571MWV) += gpio-bd9571mwv.o
obj-$(CONFIG_GPIO_BRCMSTB) += gpio-brcmstb.o
obj-$(CONFIG_GPIO_BT8XX) += gpio-bt8xx.o
obj-$(CONFIG_GPIO_CADENCE) += gpio-cadence.o
+obj-$(CONFIG_GPIO_CASCADE) += gpio-cascade.o
obj-$(CONFIG_GPIO_CLPS711X) += gpio-clps711x.o
obj-$(CONFIG_GPIO_SNPS_CREG) += gpio-creg-snps.o
obj-$(CONFIG_GPIO_CRYSTAL_COVE) += gpio-crystalcove.o
diff --git a/drivers/gpio/gpio-cascade.c b/drivers/gpio/gpio-cascade.c
new file mode 100644
index 000000000000..5cbda882d79a
--- /dev/null
+++ b/drivers/gpio/gpio-cascade.c
@@ -0,0 +1,117 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * A generic GPIO cascade driver
+ *
+ * Copyright (C) 2021 Mauri Sandberg <[email protected]>
+ *
+ * This allows building cascades of GPIO lines in a manner illustrated
+ * below:
+ *
+ * /|---- Cascaded GPIO line 0
+ * Upstream | |---- Cascaded GPIO line 1
+ * GPIO line ----+ | .
+ * | | .
+ * \|---- Cascaded GPIO line n
+ *
+ * A multiplexer is being used to select, which cascaded line is being
+ * addressed at any given time.
+ *
+ * At the moment only input mode is supported due to lack of means for
+ * testing output functionality. At least theoretically output should be
+ * possible with open drain constructions.
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/mux/consumer.h>
+
+#include <linux/gpio/consumer.h>
+#include <linux/gpio/driver.h>
+
+struct gpio_cascade {
+ struct gpio_chip gpio_chip;
+ struct device *parent;
+ struct mux_control *mux_control;
+ struct gpio_desc *upstream_line;
+};
+
+static struct gpio_cascade *chip_to_cascade(struct gpio_chip *gc)
+{
+ return container_of(gc, struct gpio_cascade, gpio_chip);
+}
+
+static int gpio_cascade_get_direction(struct gpio_chip *gc, unsigned int offset)
+{
+ return GPIO_LINE_DIRECTION_IN;
+}
+
+static int gpio_cascade_get_value(struct gpio_chip *gc, unsigned int offset)
+{
+ struct gpio_cascade *cas = chip_to_cascade(gc);
+ int ret;
+
+ ret = mux_control_select(cas->mux_control, offset);
+ if (ret)
+ return ret;
+
+ ret = gpiod_get_value(cas->upstream_line);
+ mux_control_deselect(cas->mux_control);
+ return ret;
+}
+
+static int gpio_cascade_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct gpio_cascade *cas;
+ struct mux_control *mc;
+ struct gpio_desc *upstream;
+ struct gpio_chip *gc;
+
+ cas = devm_kzalloc(dev, sizeof(*cas), GFP_KERNEL);
+ if (!cas)
+ return -ENOMEM;
+
+ mc = devm_mux_control_get(dev, NULL);
+ if (IS_ERR(mc))
+ return dev_err_probe(dev, PTR_ERR(mc), "unable to get mux-control\n");
+
+ cas->mux_control = mc;
+ upstream = devm_gpiod_get(dev, "upstream", GPIOD_IN);
+ if (IS_ERR(upstream))
+ return dev_err_probe(dev, PTR_ERR(upstream), "unable to claim upstream GPIO line\n");
+
+ cas->upstream_line = upstream;
+ cas->parent = dev;
+
+ gc = &cas->gpio_chip;
+ gc->get = gpio_cascade_get_value;
+ gc->get_direction = gpio_cascade_get_direction;
+ gc->base = -1;
+ gc->ngpio = mux_control_states(mc);
+ gc->label = dev_name(cas->parent);
+ gc->parent = cas->parent;
+ gc->owner = THIS_MODULE;
+
+ platform_set_drvdata(pdev, cas);
+ return devm_gpiochip_add_data(dev, &cas->gpio_chip, NULL);
+}
+
+static const struct of_device_id gpio_cascade_id[] = {
+ { .compatible = "gpio-cascade" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, gpio_cascade_id);
+
+static struct platform_driver gpio_cascade_driver = {
+ .driver = {
+ .name = "gpio-cascade",
+ .of_match_table = gpio_cascade_id,
+ },
+ .probe = gpio_cascade_probe,
+};
+module_platform_driver(gpio_cascade_driver);
+
+MODULE_AUTHOR("Mauri Sandberg <[email protected]>");
+MODULE_DESCRIPTION("Generic GPIO cascade");
+MODULE_LICENSE("GPL");
--
2.25.1


2022-02-07 15:24:41

by Mauri Sandberg

[permalink] [raw]
Subject: [RESEND v8 1/2] dt-bindings: gpio-cascade: add documentation

Add documentation for a general GPIO cascade. It allows building
one-to-many cascades of GPIO lines using multiplexer to choose
the cascaded line.

Signed-off-by: Mauri Sandberg <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
---
v7 -> v8:
- added Reviewed-by tag by Linus
v6 -> v7:
- no changes
v5 -> v6:
- added Reviewed-by tag by Rob
v4 -> v5:
- renamed gpio-mux-input -> gpio-cascade
- changed vague term 'pin' to 'upstream line'
- added more verbose description for the module
- added missing 'mux-controls' entry
- dropped Tested-by and Reviewed-by due to changes in bindings
v3 -> v4:
- Changed author email
- Included Tested-by and Reviewed-by from Drew
v2 -> v3: added a complete example on dual 4-way multiplexer
v1 -> v2: added a little bit more text in the binding documenation
---
.../bindings/gpio/gpio-cascade.yaml | 103 ++++++++++++++++++
1 file changed, 103 insertions(+)
create mode 100644 Documentation/devicetree/bindings/gpio/gpio-cascade.yaml

diff --git a/Documentation/devicetree/bindings/gpio/gpio-cascade.yaml b/Documentation/devicetree/bindings/gpio/gpio-cascade.yaml
new file mode 100644
index 000000000000..46248f8e2ba5
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-cascade.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/gpio-cascade.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic GPIO cascade
+
+maintainers:
+ - Mauri Sandberg <[email protected]>
+
+description: |
+ A generic GPIO cascade
+
+ This hardware construction cascades (multiplexes) several GPIO lines from
+ one-to-many using a software controlled multiplexer. The most common use
+ case is probably reading several inputs by switching the multiplexer over
+ several input lines, which in practice works well since input lines has
+ high impedance.
+
+ Constructions with multiplexed outputs are also possible using open drain
+ electronics.
+
+ The number of cascaded GPIO lines is limited by the technology used to
+ switch over the cascaded lines. There are readily available dual/triple
+ 4-to-1 multiplexers, for example, and others.
+
+ Illustration (pins used to drive the multiplexer are omitted for clarity)
+
+ /|---- Cascaded GPIO line 0
+ Upstream | |---- Cascaded GPIO line 1
+ GPIO line ----+ | .
+ | | .
+ \|---- Cascaded GPIO line n
+
+properties:
+ compatible:
+ enum:
+ - gpio-cascade
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ const: 2
+
+ mux-controls:
+ minItems: 1
+ maxItems: 1
+ description: |
+ The mux controller that will be driving the GPIO cascade.
+
+ upstream-gpios:
+ description: |
+ The GPIO line used as the upstream line will convey the status to/from
+ cascaded GPIO lines. In an input mode, by using this line, it is
+ possible to read the status from selected cascaded GPIO line.
+
+ In an output mode the status of the upstream GPIO will be conveyed to
+ the selected cascaded GPIO line.
+
+required:
+ - compatible
+ - gpio-controller
+ - "#gpio-cells"
+ - mux-controls
+ - upstream-gpios
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ mux: mux-controller {
+ compatible = "gpio-mux";
+ #mux-control-cells = <0>;
+
+ mux-gpios = <&gpio 9 GPIO_ACTIVE_HIGH>,
+ <&gpio 11 GPIO_ACTIVE_HIGH>;
+ };
+
+ gpio2: key-mux1 {
+ compatible = "gpio-cascade";
+ mux-controls = <&mux>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ // GPIOs used by this node, upstream pin
+ upstream-gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
+ };
+
+ gpio3: key-mux2 {
+ compatible = "gpio-cascade";
+ mux-controls = <&mux>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ // GPIOs used by this node, upstream pin
+ upstream-gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
+ };
+
+...
--
2.25.1