Please loop in LAKML as stated in MAINTAINERS file.
On 12:21-20220208, Hari Nagalla wrote:
> AM64x SoCs have two ESM modules, with one in MAIN voltage domain and the
> other in MCU voltage domain. The error output from Main ESM module can
> be routed to the MCU ESM module. The error output of MCU ESM can be
> configured to reset the device.
So what happens to the window for MCU ESM - Is that already open?
>
> For ESM details please refer technical reference manual at
> https://www.ti.com/lit/pdf/spruim2
>
> Signed-off-by: Hari Nagalla <[email protected]>
> ---
> arch/arm64/boot/dts/ti/k3-am64.dtsi | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-am64.dtsi b/arch/arm64/boot/dts/ti/k3-am64.dtsi
> index 120974726be8..0622a93ec136 100644
> --- a/arch/arm64/boot/dts/ti/k3-am64.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am64.dtsi
> @@ -66,6 +66,7 @@
> #address-cells = <2>;
> #size-cells = <2>;
> ranges = <0x00 0x000f4000 0x00 0x000f4000 0x00 0x000002d0>, /* PINCTRL */
> + <0x00 0x00420000 0x00 0x00420000 0x00 0x00001000>, /* ESM0 */
> <0x00 0x00600000 0x00 0x00600000 0x00 0x00001100>, /* GPIO */
> <0x00 0x00a40000 0x00 0x00a40000 0x00 0x00000800>, /* Timesync router */
> <0x00 0x01000000 0x00 0x01000000 0x00 0x02330400>, /* First peripheral window */
> --
> 2.17.1
>
--
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D