Add support for Imagis touchscreens, used on various mobile
devices such as Samsung Galaxy J5 (2015), J3 (2015), J5 (2016).
Markuss Broks (2):
dt-bindings: input/touchscreen: bindings for Imagis
Input: add Imagis touchscreen driver
.../input/touchscreen/imagis,ist3038c.yaml | 78 +++++
.../devicetree/bindings/vendor-prefixes.yaml | 2 +
MAINTAINERS | 6 +
drivers/input/touchscreen/Kconfig | 10 +
drivers/input/touchscreen/Makefile | 1 +
drivers/input/touchscreen/imagis.c | 329 ++++++++++++++++++
6 files changed, 426 insertions(+)
create mode 100644 Documentation/devicetree/bindings/input/touchscreen/imagis,ist3038c.yaml
create mode 100644 drivers/input/touchscreen/imagis.c
--
2.35.0
Add support for the IST3038C touchscreen IC from Imagis, based on
downstream driver. The driver supports multi-touch (10 touch points)
The IST3038C IC supports touch keys, but the support isn't added
because the touch screen used for testing doesn't utilize touch keys.
Looking at the downstream driver, it is possible to add support
for other Imagis ICs of IST30**C series.
Signed-off-by: Markuss Broks <[email protected]>
---
MAINTAINERS | 6 +
drivers/input/touchscreen/Kconfig | 10 +
drivers/input/touchscreen/Makefile | 1 +
drivers/input/touchscreen/imagis.c | 329 +++++++++++++++++++++++++++++
4 files changed, 346 insertions(+)
create mode 100644 drivers/input/touchscreen/imagis.c
diff --git a/MAINTAINERS b/MAINTAINERS
index c032a19f13ae..08f28245425e 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -9130,6 +9130,12 @@ F: Documentation/devicetree/bindings/iio/afe/current-sense-shunt.yaml
F: Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml
F: drivers/iio/afe/iio-rescale.c
+IMAGIS TOUCHSCREEN DRIVER
+M: Markuss Broks <[email protected]>
+S: Maintained
+F: Documentation/devicetree/bindings/input/touchscreen/imagis,ist3038c.yaml
+F: drivers/input/touchscreen/imagis.c
+
IKANOS/ADI EAGLE ADSL USB DRIVER
M: Matthieu Castet <[email protected]>
M: Stanislaw Gruszka <[email protected]>
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 0f86e248b366..f6c2a1d03ca1 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -1375,4 +1375,14 @@ config TOUCHSCREEN_HIMAX852X
To compile this driver as a module, choose M here: the
module will be called himax_852xES.
+config TOUCHSCREEN_IMAGIS
+ tristate "Imagis touchscreen support"
+ depends on I2C
+ help
+ Say Y here if you have an Imagis IST30xxC touchscreen.
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called imagis.
+
endif
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index 847bceb11e5a..50f2ba03adf6 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -115,3 +115,4 @@ obj-$(CONFIG_TOUCHSCREEN_RASPBERRYPI_FW) += raspberrypi-ts.o
obj-$(CONFIG_TOUCHSCREEN_IQS5XX) += iqs5xx.o
obj-$(CONFIG_TOUCHSCREEN_ZINITIX) += zinitix.o
obj-$(CONFIG_TOUCHSCREEN_HIMAX852X) += himax_852xES.o
+obj-$(CONFIG_TOUCHSCREEN_IMAGIS) += imagis.o
diff --git a/drivers/input/touchscreen/imagis.c b/drivers/input/touchscreen/imagis.c
new file mode 100644
index 000000000000..cfc547273245
--- /dev/null
+++ b/drivers/input/touchscreen/imagis.c
@@ -0,0 +1,329 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/property.h>
+#include <linux/input.h>
+#include <linux/input/mt.h>
+#include <linux/input/touchscreen.h>
+
+#define IST3038_ADDR_LEN 4
+#define IST3038_DATA_LEN 4
+#define IST3038_HIB_ACCESS (0x800B << 16)
+#define IST3038_DIRECT_ACCESS BIT(31)
+#define IST3038_REG_CHIPID 0x40001000
+
+#define IST3038_REG_HIB_BASE (0x30000100)
+#define IST3038_REG_TOUCH_STATUS (IST3038_REG_HIB_BASE | IST3038_HIB_ACCESS)
+#define IST3038_REG_TOUCH_COORD (IST3038_REG_HIB_BASE | IST3038_HIB_ACCESS | 0x8)
+#define IST3038_REG_INTR_MESSAGE (IST3038_REG_HIB_BASE | IST3038_HIB_ACCESS | 0x4)
+
+#define IST3038C_WHOAMI 0x38c
+#define CHIP_ON_DELAY 60 // ms
+
+#define I2C_RETRY_COUNT 3
+
+#define MAX_SUPPORTED_FINGER_NUM 10
+
+struct imagis_ts {
+ struct i2c_client *client;
+ struct input_dev *input_dev;
+ struct touchscreen_properties prop;
+ struct regulator_bulk_data supplies[2];
+};
+
+static int imagis_i2c_read_reg(struct imagis_ts *ts,
+ unsigned int reg, unsigned int *buffer)
+{
+ unsigned int reg_be = __cpu_to_be32(reg);
+ struct i2c_msg msg[] = {
+ {
+ .addr = ts->client->addr,
+ .flags = 0,
+ .buf = (unsigned char *)®_be,
+ .len = IST3038_ADDR_LEN,
+ }, {
+ .addr = ts->client->addr,
+ .flags = I2C_M_RD,
+ .buf = (unsigned char *)buffer,
+ .len = IST3038_DATA_LEN,
+ },
+ };
+ int res;
+ int error;
+ int retry = I2C_RETRY_COUNT;
+
+ do {
+ res = i2c_transfer(ts->client->adapter, msg, ARRAY_SIZE(msg));
+ if (res == ARRAY_SIZE(msg)) {
+ *buffer = __be32_to_cpu(*buffer);
+ return 0;
+ }
+
+ error = res < 0 ? res : -EIO;
+ dev_err(&ts->client->dev,
+ "%s - i2c_transfer failed: %d (%d)\n",
+ __func__, error, res);
+ } while (--retry);
+
+ return error;
+}
+
+static irqreturn_t imagis_interrupt(int irq, void *dev_id)
+{
+ struct imagis_ts *ts = dev_id;
+ unsigned int finger_status, intr_message;
+ int ret, i, finger_count, finger_pressed;
+
+ ret = imagis_i2c_read_reg(ts, IST3038_REG_INTR_MESSAGE, &intr_message);
+ if (ret) {
+ dev_err(&ts->client->dev, "failed to read the interrupt message\n");
+ return IRQ_HANDLED;
+ }
+
+ finger_count = (intr_message >> 12) & 0xF;
+ finger_pressed = intr_message & 0x3FF;
+ if (finger_count > 10) {
+ dev_err(&ts->client->dev, "finger count is more than maximum supported\n");
+ return IRQ_HANDLED;
+ }
+
+ for (i = 0; i < finger_count; i++) {
+ ret = imagis_i2c_read_reg(ts, IST3038_REG_TOUCH_COORD + (i * 4), &finger_status);
+ if (ret) {
+ dev_err(&ts->client->dev, "failed to read coordinates for finger %d\n", i);
+ return IRQ_HANDLED;
+ }
+ input_mt_slot(ts->input_dev, i);
+ input_mt_report_slot_state(ts->input_dev, MT_TOOL_FINGER,
+ (finger_pressed & BIT(i)) ? 1 : 0);
+ touchscreen_report_pos(ts->input_dev, &ts->prop,
+ (finger_status >> 12) & 0xFFF, finger_status & 0xFFF, 1);
+ input_report_abs(ts->input_dev, ABS_MT_TOUCH_MAJOR, (finger_status >> 24) & 0xFFF);
+ }
+ input_mt_sync_frame(ts->input_dev);
+ input_sync(ts->input_dev);
+
+ return IRQ_HANDLED;
+}
+
+static int imagis_start(struct imagis_ts *ts)
+{
+ int error;
+
+ error = regulator_bulk_enable(ARRAY_SIZE(ts->supplies),
+ ts->supplies);
+ if (error) {
+ dev_err(&ts->client->dev,
+ "Failed to enable regulators: %d\n", error);
+ return error;
+ }
+
+ msleep(CHIP_ON_DELAY);
+
+ enable_irq(ts->client->irq);
+ return 0;
+}
+
+static int imagis_stop(struct imagis_ts *ts)
+{
+ int error;
+
+ disable_irq(ts->client->irq);
+
+ error = regulator_bulk_disable(ARRAY_SIZE(ts->supplies),
+ ts->supplies);
+ if (error) {
+ dev_err(&ts->client->dev,
+ "Failed to disable regulators: %d\n", error);
+ return error;
+ }
+
+ return 0;
+}
+
+static int imagis_input_open(struct input_dev *dev)
+{
+ struct imagis_ts *ts = input_get_drvdata(dev);
+
+ return imagis_start(ts);
+}
+
+static void imagis_input_close(struct input_dev *dev)
+{
+ struct imagis_ts *ts = input_get_drvdata(dev);
+
+ imagis_stop(ts);
+}
+
+static int imagis_init_input_dev(struct imagis_ts *ts)
+{
+ struct input_dev *input_dev;
+ int error;
+
+ input_dev = devm_input_allocate_device(&ts->client->dev);
+ if (!input_dev) {
+ dev_err(&ts->client->dev,
+ "Failed to allocate input device.");
+ return -ENOMEM;
+ }
+
+ ts->input_dev = input_dev;
+
+ input_dev->name = "Imagis capacitive touchscreen";
+ input_dev->phys = "input/ts";
+ input_dev->id.bustype = BUS_I2C;
+ input_dev->open = imagis_input_open;
+ input_dev->close = imagis_input_close;
+
+ input_set_drvdata(input_dev, ts);
+
+ input_set_capability(input_dev, EV_ABS, ABS_MT_POSITION_X);
+ input_set_capability(input_dev, EV_ABS, ABS_MT_POSITION_Y);
+ input_set_abs_params(input_dev, ABS_MT_WIDTH_MAJOR, 0, 255, 0, 0);
+ input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0);
+
+ touchscreen_parse_properties(input_dev, true, &ts->prop);
+ if (!ts->prop.max_x || !ts->prop.max_y) {
+ dev_err(&ts->client->dev,
+ "Touchscreen-size-x and/or touchscreen-size-y not set in dts\n");
+ return -EINVAL;
+ }
+
+ error = input_mt_init_slots(input_dev, MAX_SUPPORTED_FINGER_NUM,
+ INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED);
+ if (error) {
+ dev_err(&ts->client->dev,
+ "Failed to initialize MT slots: %d", error);
+ return error;
+ }
+
+ error = input_register_device(input_dev);
+ if (error) {
+ dev_err(&ts->client->dev,
+ "Failed to register input device: %d", error);
+ return error;
+ }
+
+ return 0;
+}
+
+static int imagis_init_regulators(struct imagis_ts *ts)
+{
+ struct i2c_client *client = ts->client;
+ int error;
+
+ ts->supplies[0].supply = "vdd";
+ ts->supplies[1].supply = "vddio";
+ error = devm_regulator_bulk_get(&client->dev,
+ ARRAY_SIZE(ts->supplies),
+ ts->supplies);
+ if (error < 0) {
+ dev_err(&client->dev, "Failed to get regulators: %d\n", error);
+ return error;
+ }
+
+ return 0;
+}
+
+static int imagis_probe(struct i2c_client *i2c)
+{
+ struct device *dev;
+ struct imagis_ts *ts;
+ int chip_id, ret;
+
+ dev = &i2c->dev;
+
+ ts = devm_kzalloc(dev, sizeof(*ts), GFP_KERNEL);
+ if (!ts)
+ return -ENOMEM;
+
+ ts->client = i2c;
+
+ ret = devm_request_threaded_irq(dev, i2c->irq,
+ NULL, imagis_interrupt,
+ IRQF_ONESHOT | IRQF_TRIGGER_FALLING,
+ "imagis-touchscreen", ts);
+ if (ret)
+ return dev_err_probe(dev, ret, "IRQ allocation failure: %d\n", ret);
+
+ ret = imagis_init_regulators(ts);
+ if (ret)
+ return dev_err_probe(dev, ret, "regulator init error: %d\n", ret);
+
+ ret = imagis_start(ts);
+ if (ret)
+ return dev_err_probe(dev, ret, "regulator enable error: %d\n", ret);
+
+ ret = imagis_i2c_read_reg(ts, IST3038_REG_CHIPID | IST3038_DIRECT_ACCESS, &chip_id);
+ if (ret)
+ return dev_err_probe(dev, ret, "chip ID read failure: %d\n", ret);
+
+ if (chip_id == IST3038C_WHOAMI)
+ dev_info(dev, "Detected IST3038C chip\n");
+ else
+ return dev_err_probe(dev, -EINVAL, "unknown chip ID: 0x%x\n", chip_id);
+
+ ret = imagis_init_input_dev(ts);
+ if (ret)
+ return dev_err_probe(dev, ret, "input subsystem init error: %d\n", ret);
+
+ return 0;
+}
+
+static int __maybe_unused imagis_suspend(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct imagis_ts *ts = i2c_get_clientdata(client);
+
+ mutex_lock(&ts->input_dev->mutex);
+
+ if (input_device_enabled(ts->input_dev))
+ imagis_stop(ts);
+
+ mutex_unlock(&ts->input_dev->mutex);
+
+ return 0;
+}
+
+static int __maybe_unused imagis_resume(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct imagis_ts *ts = i2c_get_clientdata(client);
+
+ mutex_lock(&ts->input_dev->mutex);
+
+ if (input_device_enabled(ts->input_dev))
+ imagis_start(ts);
+
+ mutex_unlock(&ts->input_dev->mutex);
+
+ return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(imagis_pm_ops, imagis_suspend, imagis_resume);
+
+#ifdef CONFIG_OF
+static const struct of_device_id imagis_of_match[] = {
+ { .compatible = "imagis,ist3038c", },
+ { },
+};
+MODULE_DEVICE_TABLE(i2c, imagis_of_match);
+#endif
+
+static struct i2c_driver imagis_ts_driver = {
+ .driver = {
+ .name = "imagis-touchscreen",
+ .pm = &imagis_pm_ops,
+ .of_match_table = of_match_ptr(imagis_of_match),
+ },
+ .probe_new = imagis_probe,
+};
+
+module_i2c_driver(imagis_ts_driver);
+
+MODULE_DESCRIPTION("Imagis IST3038C Touchscreen Driver");
+MODULE_AUTHOR("Markuss Broks <[email protected]>");
+MODULE_LICENSE("GPL v2");
--
2.35.0