Hey everyone,
thanks for the feedback in v1.
Changes in v2:
* Switch back from bool to enum for distinguishing imx5/6 and imx7/8
* Added missing colorspace settings in PATCH 5
* Added PATCH 8 for hardening media-imx code
Below is theoriginal message slightly modified to match the v2 changes.
This is a set of patch for imx7 media drivers based on next-20220210. With
this set I was able to capture video frames from a MIPI CSI-2 camera in my
TQMa8MQML + MBA8MX hardware. The actual camera used is a Vision Components
'VC MIPI IMX327 C' camera. IMX327 is compatible to IMX290. Patch 9 shows the
DT overlay I'm using, not suitable for merging.
Please ignore the FPGA part, this is mainly for power supply and GPIO reset
line. This is currently a custom driver I'm working on, but I do not want to
focus on in this series.
Please note I tested this only on this imx8 platform.
First thanks to Dorota for the patchset at [1] (patches 1-4) which is necessary
to capture correct images.
Starting from patch 5 there are small fixes which allows me to configure my
media device.
Device configuration:
```
media-ctl -l "'imx290 2-001a':0->'csis-32e30000.mipi-csi':0 [1]"
media-ctl -V "'imx290 2-001a':0 [fmt:SRGGB10_1X10/1920x1080 field:none colorspace:raw]"
media-ctl -V "'csi':0 [fmt:SRGGB10_1X10/1920x1080 field:none colorspace:raw]"
v4l2-ctl -d0 --set-fmt-video width=1920,height=1080,pixelformat='RG10',field=none
media-ctl -p
```
The media-ctl topology is:
```
# media-ctl -p
Media controller API version 5.17.0
Media device information
------------------------
driver imx7-csi
model imx-media
serial
bus info platform:32e20000.csi
hw revision 0x0
driver version 5.17.0
Device topology
- entity 1: csi (2 pads, 2 links)
type V4L2 subdev subtype Unknown flags 0
device node name /dev/v4l-subdev0
pad0: Sink
[fmt:SRGGB10_1X10/1920x1080 field:none colorspace:raw xfer:none ycbcr:601 quantization:full-range]
<- "csis-32e30000.mipi-csi":1 [ENABLED,IMMUTABLE]
pad1: Source
[fmt:SRGGB10_1X10/1920x1080 field:none colorspace:raw xfer:none ycbcr:601 quantization:full-range]
-> "csi capture":0 [ENABLED,IMMUTABLE]
- entity 4: csi capture (1 pad, 1 link)
type Node subtype V4L flags 0
device node name /dev/video0
pad0: Sink
<- "csi":1 [ENABLED,IMMUTABLE]
- entity 10: csis-32e30000.mipi-csi (2 pads, 2 links)
type V4L2 subdev subtype Unknown flags 0
device node name /dev/v4l-subdev1
pad0: Sink
[fmt:SRGGB10_1X10/1920x1080 field:none colorspace:raw xfer:709 ycbcr:601 quantization:lim-range]
<- "imx290 2-001a":0 [ENABLED]
pad1: Source
[fmt:SRGGB10_1X10/1920x1080 field:none colorspace:raw xfer:709 ycbcr:601 quantization:lim-range]
-> "csi":0 [ENABLED,IMMUTABLE]
- entity 15: imx290 2-001a (1 pad, 1 link)
type V4L2 subdev subtype Sensor flags 0
device node name /dev/v4l-subdev2
pad0: Source
[fmt:SRGGB10_1X10/1920x1080 field:none colorspace:raw]
-> "csis-32e30000.mipi-csi":0 [ENABLED]
```
Note: MIPI CSI settle times are not calculated correctly right now and need a
manual overwrite:
echo 13 > /sys/kernel/debug/32e30000.mipi-csi/ths_settle
echo 2 > /sys/kernel/debug/32e30000.mipi-csi/tclk_settle
I ignored the settings for xfer, ycbcr and quantization for now. I do neither
know how they will affect me nor what it should be.
Also I did not focus on v4l2-compliance tool, this is a further task as well.
IMHO imx7-mipi-csis.c should also create an immutable link to the camera
sensor.
Regards,
Alexander
[1] https://patchwork.linuxtv.org/project/linux-media/patch/[email protected]/
Alexander Stein (5):
media: imx: imx7_mipi_csis: store colorspace in set_fmt as well
media: imx: imx7_media-csi: Add support for additional Bayer patterns
media: imx: utils: Add more Bayer formats
media: imx: utils: initialize local variable
[DNI] arm64: dts: tqma8mqml: add IMX327 MIPI-CSI overlay
Dorota Czaplejewicz (4):
media: imx: Store the type of hardware implementation
media: imx: Forward type of hardware implementation
media: imx: Use dedicated format handler for i.MX7/8
media: imx: Fail conversion if pixel format not supported
arch/arm64/boot/dts/freescale/Makefile | 4 +
.../imx8mm-tqma8mqml-mba8mx-imx327.dts | 95 ++++++++++++
drivers/staging/media/imx/imx-ic-prpencvf.c | 3 +-
drivers/staging/media/imx/imx-media-capture.c | 20 ++-
drivers/staging/media/imx/imx-media-csi.c | 3 +-
drivers/staging/media/imx/imx-media-utils.c | 136 +++++++++++++++++-
drivers/staging/media/imx/imx-media.h | 11 +-
drivers/staging/media/imx/imx7-media-csi.c | 15 +-
drivers/staging/media/imx/imx7-mipi-csis.c | 4 +
9 files changed, 275 insertions(+), 16 deletions(-)
create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx-imx327.dts
--
2.25.1