2022-02-12 14:21:47

by Vincent MAILHOL

[permalink] [raw]
Subject: [PATCH] can: etas_es58x: use BITS_PER_TYPE() instead of manual calculation

The input to the GENMASK() macro was calculated by hand. Replaced it
with a dedicated macro: BITS_PER_TYPE() which does the exact same job.

Signed-off-by: Vincent Mailhol <[email protected]>
---
drivers/net/can/usb/etas_es58x/es58x_fd.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/can/usb/etas_es58x/es58x_fd.c b/drivers/net/can/usb/etas_es58x/es58x_fd.c
index ec87126e1a7d..88d2540abbbe 100644
--- a/drivers/net/can/usb/etas_es58x/es58x_fd.c
+++ b/drivers/net/can/usb/etas_es58x/es58x_fd.c
@@ -69,7 +69,8 @@ static int es58x_fd_echo_msg(struct net_device *netdev,
int i, num_element;
u32 rcv_packet_idx;

- const u32 mask = GENMASK(31, sizeof(echo_msg->packet_idx) * 8);
+ const u32 mask = GENMASK(BITS_PER_TYPE(mask) - 1,
+ BITS_PER_TYPE(echo_msg->packet_idx));

num_element = es58x_msg_num_element(es58x_dev->dev,
es58x_fd_urb_cmd->echo_msg,
--
2.34.1


2022-02-13 07:44:59

by Marc Kleine-Budde

[permalink] [raw]
Subject: Re: [PATCH] can: etas_es58x: use BITS_PER_TYPE() instead of manual calculation

On 12.02.2022 22:07:37, Vincent Mailhol wrote:
> The input to the GENMASK() macro was calculated by hand. Replaced it
> with a dedicated macro: BITS_PER_TYPE() which does the exact same job.
>
> Signed-off-by: Vincent Mailhol <[email protected]>

Thanks for the patch, applied to linux-can-next/testing.

regards,
Marc

--
Pengutronix e.K. | Marc Kleine-Budde |
Embedded Linux | https://www.pengutronix.de |
Vertretung West/Dortmund | Phone: +49-231-2826-924 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |


Attachments:
(No filename) (610.00 B)
signature.asc (499.00 B)
Download all attachments