Refactor out the mailbox request and associated ping logic code
from k3_dsp_rproc_start() function into its own separate function
so that it can be re-used in the soon to be added .attach() ops
callback.
Signed-off-by: Suman Anna <[email protected]>
Reviewed-by: Mathieu Poirier <[email protected]>
---
v3: Updated license years, no code changes
v2: https://patchwork.kernel.org/project/linux-remoteproc/patch/[email protected]/
v1: https://patchwork.kernel.org/project/linux-remoteproc/patch/[email protected]/
drivers/remoteproc/ti_k3_dsp_remoteproc.c | 67 ++++++++++++++---------
1 file changed, 40 insertions(+), 27 deletions(-)
diff --git a/drivers/remoteproc/ti_k3_dsp_remoteproc.c b/drivers/remoteproc/ti_k3_dsp_remoteproc.c
index 939c5d90b562..b3ee03da5569 100644
--- a/drivers/remoteproc/ti_k3_dsp_remoteproc.c
+++ b/drivers/remoteproc/ti_k3_dsp_remoteproc.c
@@ -2,7 +2,7 @@
/*
* TI K3 DSP Remote Processor(s) driver
*
- * Copyright (C) 2018-2020 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2018-2022 Texas Instruments Incorporated - https://www.ti.com/
* Suman Anna <[email protected]>
*/
@@ -216,6 +216,43 @@ static int k3_dsp_rproc_release(struct k3_dsp_rproc *kproc)
return ret;
}
+static int k3_dsp_rproc_request_mbox(struct rproc *rproc)
+{
+ struct k3_dsp_rproc *kproc = rproc->priv;
+ struct mbox_client *client = &kproc->client;
+ struct device *dev = kproc->dev;
+ int ret;
+
+ client->dev = dev;
+ client->tx_done = NULL;
+ client->rx_callback = k3_dsp_rproc_mbox_callback;
+ client->tx_block = false;
+ client->knows_txdone = false;
+
+ kproc->mbox = mbox_request_channel(client, 0);
+ if (IS_ERR(kproc->mbox)) {
+ ret = -EBUSY;
+ dev_err(dev, "mbox_request_channel failed: %ld\n",
+ PTR_ERR(kproc->mbox));
+ return ret;
+ }
+
+ /*
+ * Ping the remote processor, this is only for sanity-sake for now;
+ * there is no functional effect whatsoever.
+ *
+ * Note that the reply will _not_ arrive immediately: this message
+ * will wait in the mailbox fifo until the remote processor is booted.
+ */
+ ret = mbox_send_message(kproc->mbox, (void *)RP_MBOX_ECHO_REQUEST);
+ if (ret < 0) {
+ dev_err(dev, "mbox_send_message failed: %d\n", ret);
+ mbox_free_channel(kproc->mbox);
+ return ret;
+ }
+
+ return 0;
+}
/*
* The C66x DSP cores have a local reset that affects only the CPU, and a
* generic module reset that powers on the device and allows the DSP internal
@@ -273,37 +310,13 @@ static int k3_dsp_rproc_unprepare(struct rproc *rproc)
static int k3_dsp_rproc_start(struct rproc *rproc)
{
struct k3_dsp_rproc *kproc = rproc->priv;
- struct mbox_client *client = &kproc->client;
struct device *dev = kproc->dev;
u32 boot_addr;
int ret;
- client->dev = dev;
- client->tx_done = NULL;
- client->rx_callback = k3_dsp_rproc_mbox_callback;
- client->tx_block = false;
- client->knows_txdone = false;
-
- kproc->mbox = mbox_request_channel(client, 0);
- if (IS_ERR(kproc->mbox)) {
- ret = -EBUSY;
- dev_err(dev, "mbox_request_channel failed: %ld\n",
- PTR_ERR(kproc->mbox));
+ ret = k3_dsp_rproc_request_mbox(rproc);
+ if (ret)
return ret;
- }
-
- /*
- * Ping the remote processor, this is only for sanity-sake for now;
- * there is no functional effect whatsoever.
- *
- * Note that the reply will _not_ arrive immediately: this message
- * will wait in the mailbox fifo until the remote processor is booted.
- */
- ret = mbox_send_message(kproc->mbox, (void *)RP_MBOX_ECHO_REQUEST);
- if (ret < 0) {
- dev_err(dev, "mbox_send_message failed: %d\n", ret);
- goto put_mbox;
- }
boot_addr = rproc->bootaddr;
if (boot_addr & (kproc->data->boot_align_addr - 1)) {
--
2.32.0