Remove all remaining DBG_88E calls from the hal subdirectory. After some
thought, it makes more sense to just entirely strip all of these calls,
so that debugging code in the driver can be more consistent and useful
going forwards.
Signed-off-by: Phillip Potter <[email protected]>
---
drivers/staging/r8188eu/hal/HalPwrSeqCmd.c | 1 -
drivers/staging/r8188eu/hal/hal_intf.c | 3 +-
drivers/staging/r8188eu/hal/rtl8188e_cmd.c | 26 +-----------
.../staging/r8188eu/hal/rtl8188e_hal_init.c | 40 +-----------------
drivers/staging/r8188eu/hal/rtl8188e_phycfg.c | 2 +-
drivers/staging/r8188eu/hal/rtl8188eu_recv.c | 4 +-
drivers/staging/r8188eu/hal/rtl8188eu_xmit.c | 5 +--
drivers/staging/r8188eu/hal/usb_halinit.c | 42 +------------------
drivers/staging/r8188eu/hal/usb_ops_linux.c | 17 --------
9 files changed, 9 insertions(+), 131 deletions(-)
diff --git a/drivers/staging/r8188eu/hal/HalPwrSeqCmd.c b/drivers/staging/r8188eu/hal/HalPwrSeqCmd.c
index 47ad4ea273cc..eb22ac17c586 100644
--- a/drivers/staging/r8188eu/hal/HalPwrSeqCmd.c
+++ b/drivers/staging/r8188eu/hal/HalPwrSeqCmd.c
@@ -64,7 +64,6 @@ u8 HalPwrSeqCmdParsing(struct adapter *padapter, struct wl_pwr_cfg pwrseqcmd[])
udelay(10);
if (poll_count++ > max_poll_count) {
- DBG_88E("Fail to polling Offset[%#x]\n", offset);
return false;
}
} while (!poll_bit);
diff --git a/drivers/staging/r8188eu/hal/hal_intf.c b/drivers/staging/r8188eu/hal/hal_intf.c
index fee3a598b59d..008098040a07 100644
--- a/drivers/staging/r8188eu/hal/hal_intf.c
+++ b/drivers/staging/r8188eu/hal/hal_intf.c
@@ -21,7 +21,6 @@ uint rtw_hal_init(struct adapter *adapt)
hal_notch_filter_8188e(adapt, 1);
} else {
adapt->hw_init_completed = false;
- DBG_88E("rtw_hal_init: hal__init fail\n");
}
return status;
@@ -36,7 +35,7 @@ uint rtw_hal_deinit(struct adapter *adapt)
if (status == _SUCCESS)
adapt->hw_init_completed = false;
else
- DBG_88E("\n rtw_hal_deinit: hal_init fail\n");
+ ;
return status;
}
diff --git a/drivers/staging/r8188eu/hal/rtl8188e_cmd.c b/drivers/staging/r8188eu/hal/rtl8188e_cmd.c
index a491c37777df..93dfd3dee59b 100644
--- a/drivers/staging/r8188eu/hal/rtl8188e_cmd.c
+++ b/drivers/staging/r8188eu/hal/rtl8188e_cmd.c
@@ -55,7 +55,6 @@ static s32 FillH2CCmd_88E(struct adapter *adapt, u8 ElementID, u32 CmdLen, u8 *p
u32 h2c_cmd_ex = 0;
if (!adapt->bFWReady) {
- DBG_88E("FillH2CCmd_88E(): return H2C cmd because fw is not ready\n");
return _FAIL;
}
@@ -67,7 +66,6 @@ static s32 FillH2CCmd_88E(struct adapter *adapt, u8 ElementID, u32 CmdLen, u8 *p
h2c_box_num = haldata->LastHMEBoxNum;
if (!_is_fw_read_cmd_down(adapt, h2c_box_num)) {
- DBG_88E(" fw read cmd failed...\n");
return _FAIL;
}
@@ -115,7 +113,6 @@ u8 rtl8188e_set_raid_cmd(struct adapter *adapt, u32 mask)
FillH2CCmd_88E(adapt, H2C_DM_MACID_CFG, 3, buf);
} else {
- DBG_88E("==>%s fw dont support RA\n", __func__);
res = _FAIL;
}
@@ -157,9 +154,6 @@ void rtl8188e_set_FwPwrMode_cmd(struct adapter *adapt, u8 Mode)
struct pwrctrl_priv *pwrpriv = &adapt->pwrctrlpriv;
u8 RLBM = 0; /* 0:Min, 1:Max, 2:User define */
- DBG_88E("%s: Mode=%d SmartPS=%d UAPSD=%d\n", __func__,
- Mode, pwrpriv->smart_ps, adapt->registrypriv.uapsd_enable);
-
switch (Mode) {
case PS_MODE_ACTIVE:
H2CSetPwrMode.Mode = 0;
@@ -200,12 +194,8 @@ void rtl8188e_set_FwPwrMode_cmd(struct adapter *adapt, u8 Mode)
void rtl8188e_set_FwMediaStatus_cmd(struct adapter *adapt, __le16 mstatus_rpt)
{
- u8 opmode, macid;
u16 mst_rpt = le16_to_cpu(mstatus_rpt);
- opmode = (u8)mst_rpt;
- macid = (u8)(mst_rpt >> 8);
- DBG_88E("### %s: MStatus=%x MACID=%d\n", __func__, opmode, macid);
FillH2CCmd_88E(adapt, H2C_COM_MEDIA_STATUS_RPT, sizeof(mst_rpt), (u8 *)&mst_rpt);
}
@@ -286,7 +276,6 @@ static void ConstructBeacon(struct adapter *adapt, u8 *pframe, u32 *pLength)
_ConstructBeacon:
if ((pktlen + TXDESC_SIZE) > 512) {
- DBG_88E("beacon frame too large\n");
return;
}
@@ -453,10 +442,8 @@ static void SetFwRsvdPagePkt(struct adapter *adapt, bool bDLFinished)
u32 TotalPacketLen;
struct rsvdpage_loc RsvdPageLoc;
- DBG_88E("%s\n", __func__);
ReservedPagePacket = kzalloc(1000, GFP_KERNEL);
if (!ReservedPagePacket) {
- DBG_88E("%s: alloc ReservedPagePacket fail!\n", __func__);
return;
}
@@ -535,7 +522,6 @@ static void SetFwRsvdPagePkt(struct adapter *adapt, bool bDLFinished)
rtl8188eu_mgnt_xmit(adapt, pmgntframe);
- DBG_88E("%s: Set RSVD page location to Fw\n", __func__);
FillH2CCmd_88E(adapt, H2C_COM_RSVD_PAGE, sizeof(RsvdPageLoc), (u8 *)&RsvdPageLoc);
exit:
@@ -552,8 +538,6 @@ void rtl8188e_set_FwJoinBssReport_cmd(struct adapter *adapt, u8 mstatus)
u8 DLBcnCount = 0;
u32 poll = 0;
- DBG_88E("%s mstatus(%x)\n", __func__, mstatus);
-
if (mstatus == 1) {
/* We should set AID, correct TSF, HW seq enable before set JoinBssReport to Fw in 88/92C. */
/* Suggested by filen. Added by tynli. */
@@ -571,7 +555,6 @@ void rtl8188e_set_FwJoinBssReport_cmd(struct adapter *adapt, u8 mstatus)
rtw_write8(adapt, REG_BCN_CTRL, rtw_read8(adapt, REG_BCN_CTRL) | BIT(4));
if (haldata->RegFwHwTxQCtrl & BIT(6)) {
- DBG_88E("HalDownloadRSVDPage(): There is an Adapter is sending beacon.\n");
bSendBeacon = true;
}
@@ -599,9 +582,9 @@ void rtl8188e_set_FwJoinBssReport_cmd(struct adapter *adapt, u8 mstatus)
if (adapt->bSurpriseRemoved || adapt->bDriverStopped)
;
else if (!bcn_valid)
- DBG_88E("%s: 1 Download RSVD page failed! DLBcnCount:%u, poll:%u\n", __func__, DLBcnCount, poll);
+ ;
else
- DBG_88E("%s: 1 Download RSVD success! DLBcnCount:%u, poll:%u\n", __func__, DLBcnCount, poll);
+ ;
/* */
/* We just can send the reserved page twice during the time that Tx thread is stopped (e.g. pnpsetpower) */
/* because we need to free the Tx BCN Desc which is used by the first reserved page packet. */
@@ -626,7 +609,6 @@ void rtl8188e_set_FwJoinBssReport_cmd(struct adapter *adapt, u8 mstatus)
/* Update RSVD page location H2C to Fw. */
if (bcn_valid) {
SetHwReg8188EU(adapt, HW_VAR_BCN_VALID, NULL);
- DBG_88E("Set RSVD page location to Fw.\n");
}
/* Do not enable HW DMA BCN or it will cause Pcie interface hang by timing issue. 2011.11.24. by tynli. */
@@ -646,11 +628,9 @@ void rtl8188e_set_p2p_ps_offload_cmd(struct adapter *adapt, u8 p2p_ps_state)
switch (p2p_ps_state) {
case P2P_PS_DISABLE:
- DBG_88E("P2P_PS_DISABLE\n");
memset(p2p_ps_offload, 0, 1);
break;
case P2P_PS_ENABLE:
- DBG_88E("P2P_PS_ENABLE\n");
/* update CTWindow value. */
if (pwdinfo->ctwindow > 0) {
p2p_ps_offload->CTWindow_En = 1;
@@ -690,11 +670,9 @@ void rtl8188e_set_p2p_ps_offload_cmd(struct adapter *adapt, u8 p2p_ps_state)
}
break;
case P2P_PS_SCAN:
- DBG_88E("P2P_PS_SCAN\n");
p2p_ps_offload->discovery = 1;
break;
case P2P_PS_SCAN_DONE:
- DBG_88E("P2P_PS_SCAN_DONE\n");
p2p_ps_offload->discovery = 0;
pwdinfo->p2p_ps_state = P2P_PS_ENABLE;
break;
diff --git a/drivers/staging/r8188eu/hal/rtl8188e_hal_init.c b/drivers/staging/r8188eu/hal/rtl8188e_hal_init.c
index 8fe74e21992e..f83ae7a7e5d9 100644
--- a/drivers/staging/r8188eu/hal/rtl8188e_hal_init.c
+++ b/drivers/staging/r8188eu/hal/rtl8188e_hal_init.c
@@ -20,7 +20,6 @@ static void iol_mode_enable(struct adapter *padapter, u8 enable)
rtw_write8(padapter, REG_SYS_CFG, reg_0xf0 | SW_OFFLOAD_EN);
if (!padapter->bFWReady) {
- DBG_88E("bFWReady == false call reset 8051...\n");
rtw_reset_8051(padapter);
}
@@ -78,13 +77,11 @@ efuse_phymap_to_logical(u8 *phymap, u16 _offset, u16 _size_byte, u8 *pbuf)
efuseTbl = kzalloc(EFUSE_MAP_LEN_88E, GFP_KERNEL);
if (!efuseTbl) {
- DBG_88E("%s: alloc efuseTbl fail!\n", __func__);
goto exit;
}
eFuseWord = rtw_malloc2d(EFUSE_MAX_SECTION_88E, EFUSE_MAX_WORD_UNIT, sizeof(u16));
if (!eFuseWord) {
- DBG_88E("%s: alloc eFuseWord fail!\n", __func__);
goto exit;
}
@@ -102,7 +99,6 @@ efuse_phymap_to_logical(u8 *phymap, u16 _offset, u16 _size_byte, u8 *pbuf)
efuse_utilized++;
eFuse_Addr++;
} else {
- DBG_88E("EFUSE is empty efuse_Addr-%d efuse_data =%x\n", eFuse_Addr, rtemp8);
goto exit;
}
@@ -207,8 +203,6 @@ static void efuse_read_phymap_from_txpktbuf(
if (bcnhead < 0) /* if not valid */
bcnhead = rtw_read8(adapter, REG_TDECTRL + 1);
- DBG_88E("%s bcnhead:%d\n", __func__, bcnhead);
-
rtw_write8(adapter, REG_PKT_BUFF_ACCESS_CTRL, TXPKT_BUF_SELECT);
dbg_addr = bcnhead * 128 / 8; /* 8-bytes addressing */
@@ -220,7 +214,6 @@ static void efuse_read_phymap_from_txpktbuf(
start = jiffies;
while (!(reg_0x143 = rtw_read8(adapter, REG_TXPKTBUF_DBG)) &&
(passing_time = rtw_get_passing_time_ms(start)) < 1000) {
- DBG_88E("%s polling reg_0x143:0x%02x, reg_0x106:0x%02x\n", __func__, reg_0x143, rtw_read8(adapter, 0x106));
rtw_usleep_os(100);
}
@@ -233,14 +226,12 @@ static void efuse_read_phymap_from_txpktbuf(
* do not remove it as the rtw_read16() call consumes
* 2 bytes from the EEPROM source.
*/
- u16 lenc = rtw_read16(adapter, REG_PKTBUF_DBG_DATA_L);
+ rtw_read16(adapter, REG_PKTBUF_DBG_DATA_L);
len = le32_to_cpu(lo32) & 0x0000ffff;
limit = (len - 2 < limit) ? len - 2 : limit;
- DBG_88E("%s len:%u, lenc:%u\n", __func__, len, lenc);
-
memcpy(pos, ((u8 *)&lo32) + 2, (limit >= count + 2) ? 2 : limit - count);
count += (limit >= count + 2) ? 2 : limit - count;
pos = content + count;
@@ -261,7 +252,6 @@ static void efuse_read_phymap_from_txpktbuf(
i++;
}
rtw_write8(adapter, REG_PKT_BUFF_ACCESS_CTRL, DISABLE_TRXPKT_BUF_ACCESS);
- DBG_88E("%s read count:%u\n", __func__, count);
*size = count;
}
@@ -285,7 +275,6 @@ s32 rtl8188e_iol_efuse_patch(struct adapter *padapter)
{
s32 result = _SUCCESS;
- DBG_88E("==> %s\n", __func__);
if (rtw_IOL_applied(padapter)) {
iol_mode_enable(padapter, 1);
result = iol_execute(padapter, CMD_READ_EFUSE_MAP);
@@ -385,19 +374,16 @@ static void Hal_EfuseReadEFuse88E(struct adapter *Adapter,
/* Do NOT excess total size of EFuse table. Added by Roger, 2008.11.10. */
/* */
if ((_offset + _size_byte) > EFUSE_MAP_LEN_88E) {/* total E-Fuse table is 512bytes */
- DBG_88E("Hal_EfuseReadEFuse88E(): Invalid offset(%#x) with read bytes(%#x)!!\n", _offset, _size_byte);
goto exit;
}
efuseTbl = kzalloc(EFUSE_MAP_LEN_88E, GFP_KERNEL);
if (!efuseTbl) {
- DBG_88E("%s: alloc efuseTbl fail!\n", __func__);
goto exit;
}
eFuseWord = rtw_malloc2d(EFUSE_MAX_SECTION_88E, EFUSE_MAX_WORD_UNIT, sizeof(u16));
if (!eFuseWord) {
- DBG_88E("%s: alloc eFuseWord fail!\n", __func__);
goto exit;
}
@@ -415,7 +401,6 @@ static void Hal_EfuseReadEFuse88E(struct adapter *Adapter,
efuse_utilized++;
eFuse_Addr++;
} else {
- DBG_88E("EFUSE is empty efuse_Addr-%d efuse_data =%x\n", eFuse_Addr, *rtemp8);
goto exit;
}
@@ -542,11 +527,9 @@ void rtl8188e_SetHalODMVar(struct adapter *Adapter, void *pValue1, bool bSet)
struct sta_info *psta = (struct sta_info *)pValue1;
if (bSet) {
- DBG_88E("### Set STA_(%d) info\n", psta->mac_id);
podmpriv->pODM_StaInfo[psta->mac_id] = psta;
ODM_RAInfo_Init(podmpriv, psta->mac_id);
} else {
- DBG_88E("### Clean STA_(%d) info\n", psta->mac_id);
podmpriv->pODM_StaInfo[psta->mac_id] = NULL;
}
}
@@ -554,10 +537,8 @@ void rtl8188e_SetHalODMVar(struct adapter *Adapter, void *pValue1, bool bSet)
void hal_notch_filter_8188e(struct adapter *adapter, bool enable)
{
if (enable) {
- DBG_88E("Enable notch filter\n");
rtw_write8(adapter, rOFDM0_RxDSP + 1, rtw_read8(adapter, rOFDM0_RxDSP + 1) | BIT(1));
} else {
- DBG_88E("Disable notch filter\n");
rtw_write8(adapter, rOFDM0_RxDSP + 1, rtw_read8(adapter, rOFDM0_RxDSP + 1) & ~BIT(1));
}
}
@@ -791,11 +772,6 @@ void Hal_ReadPowerSavingMode88E(struct adapter *padapter, u8 *hwinfo, bool AutoL
/* decide hw if support remote wakeup function */
/* if hw supported, 8051 (SIE) will generate WeakUP signal(D+/D- toggle) when autoresume */
padapter->pwrctrlpriv.bSupportRemoteWakeup = (hwinfo[EEPROM_USB_OPTIONAL_FUNCTION0] & BIT(1)) ? true : false;
-
- DBG_88E("%s , bSupportRemoteWakeup(%x)\n", __func__,
- padapter->pwrctrlpriv.bSupportRemoteWakeup);
-
- DBG_88E("### PS params => power_mgnt(%x), usbss_enable(%x) ###\n", padapter->registrypriv.power_mgnt, padapter->registrypriv.usbss_enable);
}
}
@@ -816,17 +792,10 @@ void Hal_ReadTxPowerInfo88E(struct adapter *padapter, u8 *PROMContent, bool Auto
pHalData->Index24G_BW40_Base[ch] = pwrInfo24G.IndexBW40_Base[0][4];
else
pHalData->Index24G_BW40_Base[ch] = pwrInfo24G.IndexBW40_Base[0][group];
-
- DBG_88E("======= Path 0, Channel %d =======\n", ch);
- DBG_88E("Index24G_CCK_Base[%d] = 0x%x\n", ch, pHalData->Index24G_CCK_Base[ch]);
- DBG_88E("Index24G_BW40_Base[%d] = 0x%x\n", ch, pHalData->Index24G_BW40_Base[ch]);
}
for (TxCount = 0; TxCount < MAX_TX_COUNT; TxCount++) {
pHalData->OFDM_24G_Diff[TxCount] = pwrInfo24G.OFDM_Diff[0][TxCount];
pHalData->BW20_24G_Diff[TxCount] = pwrInfo24G.BW20_Diff[0][TxCount];
- DBG_88E("======= TxCount %d =======\n", TxCount);
- DBG_88E("OFDM_24G_Diff[%d] = %d\n", TxCount, pHalData->OFDM_24G_Diff[TxCount]);
- DBG_88E("BW20_24G_Diff[%d] = %d\n", TxCount, pHalData->BW20_24G_Diff[TxCount]);
}
/* 2010/10/19 MH Add Regulator recognize for CU. */
@@ -837,7 +806,6 @@ void Hal_ReadTxPowerInfo88E(struct adapter *padapter, u8 *PROMContent, bool Auto
} else {
pHalData->EEPROMRegulatory = 0;
}
- DBG_88E("EEPROMRegulatory = 0x%x\n", pHalData->EEPROMRegulatory);
}
void Hal_EfuseParseXtal_8188E(struct adapter *pAdapter, u8 *hwinfo, bool AutoLoadFail)
@@ -851,7 +819,6 @@ void Hal_EfuseParseXtal_8188E(struct adapter *pAdapter, u8 *hwinfo, bool AutoLoa
} else {
pHalData->CrystalCap = EEPROM_Default_CrystalCap_88E;
}
- DBG_88E("CrystalCap: 0x%2x\n", pHalData->CrystalCap);
}
void rtl8188e_EfuseParseChnlPlan(struct adapter *padapter, u8 *hwinfo, bool AutoLoadFail)
@@ -861,8 +828,6 @@ void rtl8188e_EfuseParseChnlPlan(struct adapter *padapter, u8 *hwinfo, bool Auto
hwinfo ? hwinfo[EEPROM_ChannelPlan_88E] : 0xFF,
padapter->registrypriv.channel_plan,
RT_CHANNEL_DOMAIN_WORLD_WIDE_13, AutoLoadFail);
-
- DBG_88E("mlmepriv.ChannelPlan = 0x%02x\n", padapter->mlmepriv.ChannelPlan);
}
void Hal_ReadAntennaDiversity88E(struct adapter *pAdapter, u8 *PROMContent, bool AutoLoadFail)
@@ -894,7 +859,6 @@ void Hal_ReadAntennaDiversity88E(struct adapter *pAdapter, u8 *PROMContent, bool
} else {
pHalData->AntDivCfg = 0;
}
- DBG_88E("EEPROM : AntDivCfg = %x, TRxAntDivType = %x\n", pHalData->AntDivCfg, pHalData->TRxAntDivType);
}
void Hal_ReadThermalMeter_88E(struct adapter *Adapter, u8 *PROMContent, bool AutoloadFail)
@@ -909,6 +873,4 @@ void Hal_ReadThermalMeter_88E(struct adapter *Adapter, u8 *PROMContent, bool Aut
if (pHalData->EEPROMThermalMeter == 0xff || AutoloadFail)
pHalData->EEPROMThermalMeter = EEPROM_Default_ThermalMeter_88E;
-
- DBG_88E("ThermalMeter = 0x%x\n", pHalData->EEPROMThermalMeter);
}
diff --git a/drivers/staging/r8188eu/hal/rtl8188e_phycfg.c b/drivers/staging/r8188eu/hal/rtl8188e_phycfg.c
index b0e5b9f6a005..5c8d43014603 100644
--- a/drivers/staging/r8188eu/hal/rtl8188e_phycfg.c
+++ b/drivers/staging/r8188eu/hal/rtl8188e_phycfg.c
@@ -685,7 +685,7 @@ static void _PHY_SwChnl8192C(struct adapter *Adapter, u8 channel)
struct hal_data_8188e *pHalData = &Adapter->haldata;
if (Adapter->bNotifyChannelChange)
- DBG_88E("[%s] ch = %d\n", __func__, channel);
+ ;
/* s1. pre common command - CmdID_SetTxPowerLevel */
PHY_SetTxPowerLevel8188E(Adapter, channel);
diff --git a/drivers/staging/r8188eu/hal/rtl8188eu_recv.c b/drivers/staging/r8188eu/hal/rtl8188eu_recv.c
index 8031ac9f9d43..08bdf715d872 100644
--- a/drivers/staging/r8188eu/hal/rtl8188eu_recv.c
+++ b/drivers/staging/r8188eu/hal/rtl8188eu_recv.c
@@ -107,11 +107,11 @@ void rtl8188eu_free_recv_priv(struct adapter *padapter)
kfree(precvpriv->pallocated_recv_buf);
if (skb_queue_len(&precvpriv->rx_skb_queue))
- DBG_88E(KERN_WARNING "rx_skb_queue not empty\n");
+ ;
skb_queue_purge(&precvpriv->rx_skb_queue);
if (skb_queue_len(&precvpriv->free_recv_skb_queue))
- DBG_88E(KERN_WARNING "free_recv_skb_queue not empty, %d\n", skb_queue_len(&precvpriv->free_recv_skb_queue));
+ ;
skb_queue_purge(&precvpriv->free_recv_skb_queue);
}
diff --git a/drivers/staging/r8188eu/hal/rtl8188eu_xmit.c b/drivers/staging/r8188eu/hal/rtl8188eu_xmit.c
index f2555c97b0c4..db6ad97d6a2b 100644
--- a/drivers/staging/r8188eu/hal/rtl8188eu_xmit.c
+++ b/drivers/staging/r8188eu/hal/rtl8188eu_xmit.c
@@ -265,10 +265,7 @@ static s32 update_txdesc(struct xmit_frame *pxmitframe, u8 *pmem, s32 sz, u8 bag
ptxdesc->txdw5 |= cpu_to_le32(MRateToHwRate(pmlmeext->tx_rate));
} else if ((pxmitframe->frame_tag & 0x0f) == TXAGG_FRAMETAG) {
- DBG_88E("pxmitframe->frame_tag == TXAGG_FRAMETAG\n");
} else {
- DBG_88E("pxmitframe->frame_tag = %d\n", pxmitframe->frame_tag);
-
/* offset 4 */
ptxdesc->txdw1 |= cpu_to_le32((4) & 0x3f);/* CAM_ID(MAC_ID) */
@@ -573,7 +570,7 @@ static s32 xmitframe_direct(struct adapter *adapt, struct xmit_frame *pxmitframe
if (res == _SUCCESS)
rtw_dump_xframe(adapt, pxmitframe);
else
- DBG_88E("==> %s xmitframe_coalsece failed\n", __func__);
+ ;
return res;
}
diff --git a/drivers/staging/r8188eu/hal/usb_halinit.c b/drivers/staging/r8188eu/hal/usb_halinit.c
index 3b8869455166..cc11ddac86b7 100644
--- a/drivers/staging/r8188eu/hal/usb_halinit.c
+++ b/drivers/staging/r8188eu/hal/usb_halinit.c
@@ -33,7 +33,6 @@ static void _ConfigNormalChipOutEP_8188E(struct adapter *adapt, u8 NumOutPipe)
default:
break;
}
- DBG_88E("%s OutEpQueueSel(0x%02x), OutEpNumber(%d)\n", __func__, haldata->OutEpQueueSel, haldata->OutEpNumber);
}
static bool HalUsbSetQueuePipeMapping8188EUsb(struct adapter *adapt, u8 NumOutPipe)
@@ -59,7 +58,6 @@ u32 rtl8188eu_InitPowerOn(struct adapter *adapt)
return _SUCCESS;
if (!HalPwrSeqCmdParsing(adapt, Rtl8188E_NIC_PWR_ON_FLOW)) {
- DBG_88E(KERN_ERR "%s: run power on flow fail\n", __func__);
return _FAIL;
}
@@ -495,7 +493,6 @@ static void _InitAntenna_Selection(struct adapter *Adapter)
if (haldata->AntDivCfg == 0)
return;
- DBG_88E("==> %s ....\n", __func__);
rtw_write32(Adapter, REG_LEDCFG0, rtw_read32(Adapter, REG_LEDCFG0) | BIT(23));
rtl8188e_PHY_SetBBReg(Adapter, rFPGA0_XAB_RFParameter, BIT(13), 0x01);
@@ -504,7 +501,6 @@ static void _InitAntenna_Selection(struct adapter *Adapter)
haldata->CurAntenna = Antenna_A;
else
haldata->CurAntenna = Antenna_B;
- DBG_88E("%s,Cur_ant:(%x)%s\n", __func__, haldata->CurAntenna, (haldata->CurAntenna == Antenna_A) ? "Antenna_A" : "Antenna_B");
}
static void hw_var_set_macaddr(struct adapter *Adapter, u8 *val)
@@ -527,7 +523,6 @@ u32 rtl8188eu_hal_init(struct adapter *Adapter)
struct hal_data_8188e *haldata = &Adapter->haldata;
struct pwrctrl_priv *pwrctrlpriv = &Adapter->pwrctrlpriv;
struct registry_priv *pregistrypriv = &Adapter->registrypriv;
- u32 init_start_time = jiffies;
if (Adapter->pwrctrlpriv.bkeepfwalive) {
if (haldata->odmpriv.RFCalibrateInfo.bIQKInitialized) {
@@ -575,7 +570,6 @@ u32 rtl8188eu_hal_init(struct adapter *Adapter)
status = rtl8188e_firmware_download(Adapter);
if (status != _SUCCESS) {
- DBG_88E("%s: Download Firmware failed!!\n", __func__);
Adapter->bFWReady = false;
haldata->fw_ractrl = false;
return status;
@@ -589,7 +583,6 @@ u32 rtl8188eu_hal_init(struct adapter *Adapter)
status = PHY_MACConfig8188E(Adapter);
if (status == _FAIL) {
- DBG_88E(" ### Failed to init MAC ......\n ");
goto exit;
}
@@ -598,19 +591,16 @@ u32 rtl8188eu_hal_init(struct adapter *Adapter)
/* */
status = PHY_BBConfig8188E(Adapter);
if (status == _FAIL) {
- DBG_88E(" ### Failed to init BB ......\n ");
goto exit;
}
status = PHY_RFConfig8188E(Adapter);
if (status == _FAIL) {
- DBG_88E(" ### Failed to init RF ......\n ");
goto exit;
}
status = rtl8188e_iol_efuse_patch(Adapter);
if (status == _FAIL) {
- DBG_88E("%s rtl8188e_iol_efuse_patch failed\n", __func__);
goto exit;
}
@@ -731,8 +721,6 @@ u32 rtl8188eu_hal_init(struct adapter *Adapter)
rtw_write32(Adapter, REG_FWHW_TXQ_CTRL, rtw_read32(Adapter, REG_FWHW_TXQ_CTRL) | BIT(12));
exit:
- DBG_88E("%s in %dms\n", __func__, rtw_get_passing_time_ms(init_start_time));
-
return status;
}
@@ -794,13 +782,9 @@ static void CardDisableRTL8188EU(struct adapter *Adapter)
u32 rtl8188eu_hal_deinit(struct adapter *Adapter)
{
-
- DBG_88E("==> %s\n", __func__);
-
rtw_write32(Adapter, REG_HIMR_88E, IMR_DISABLED_88E);
rtw_write32(Adapter, REG_HIMRE_88E, IMR_DISABLED_88E);
- DBG_88E("bkeepfwalive(%x)\n", Adapter->pwrctrlpriv.bkeepfwalive);
if (!Adapter->pwrctrlpriv.bkeepfwalive) {
if (Adapter->hw_init_completed) {
CardDisableRTL8188EU(Adapter);
@@ -869,9 +853,6 @@ void ReadAdapterInfo8188EU(struct adapter *Adapter)
eeprom->EepromOrEfuse = (eeValue & BOOT_FROM_EEPROM);
eeprom->bautoload_fail_flag = !(eeValue & EEPROM_EN);
- DBG_88E("Boot from %s, Autoload %s !\n", (eeprom->EepromOrEfuse ? "EEPROM" : "EFUSE"),
- (eeprom->bautoload_fail_flag ? "Fail" : "OK"));
-
if (!is_boot_from_eeprom(Adapter))
EFUSE_ShadowMapUpdate(Adapter);
@@ -932,8 +913,6 @@ static void hw_var_set_opmode(struct adapter *Adapter, u8 *val)
val8 |= mode;
rtw_write8(Adapter, MSR, val8);
- DBG_88E("%s()-%d mode = %d\n", __func__, __LINE__, mode);
-
if ((mode == _HW_STATE_STATION_) || (mode == _HW_STATE_NOLINK_)) {
StopTxBeacon(Adapter);
@@ -1010,7 +989,6 @@ void SetHwReg8188EU(struct adapter *Adapter, u8 variable, u8 *val)
/* For 8190, we select only 24M, 12M, 6M, 11M, 5.5M, 2M, and 1M from the Basic rate. */
/* We do not use other rates. */
HalSetBrateCfg(Adapter, val, &BrateCfg);
- DBG_88E("HW_VAR_BASIC_RATE: BrateCfg(%#x)\n", BrateCfg);
/* 2011.03.30 add by Luke Lee */
/* CCK 2M ACK should be disabled for some BCM and Atheros AP IOT */
@@ -1220,7 +1198,6 @@ void SetHwReg8188EU(struct adapter *Adapter, u8 variable, u8 *val)
else
AcmCtrl &= (~AcmHw_BeqEn);
- DBG_88E("[HW_VAR_ACM_CTRL] Write 0x%X\n", AcmCtrl);
rtw_write8(Adapter, REG_ACMHWCTRL, AcmCtrl);
}
break;
@@ -1360,7 +1337,7 @@ void SetHwReg8188EU(struct adapter *Adapter, u8 variable, u8 *val)
break;
} while (trycnt--);
if (trycnt == 0)
- DBG_88E("Stop RX DMA failed......\n");
+ ;
/* RQPN Load 0 */
rtw_write16(Adapter, REG_RQPN_NPQ, 0x0);
@@ -1372,7 +1349,6 @@ void SetHwReg8188EU(struct adapter *Adapter, u8 variable, u8 *val)
case HW_VAR_TX_RPT_MAX_MACID:
{
u8 maxMacid = *val;
- DBG_88E("### MacID(%d),Set Max Tx RPT MID(%d)\n", maxMacid, maxMacid + 1);
rtw_write8(Adapter, REG_TX_RPT_CTRL + 1, maxMacid + 1);
}
break;
@@ -1456,16 +1432,7 @@ void GetHalDefVar8188EUsb(struct adapter *Adapter, enum hal_def_variable eVariab
break;
case HW_DEF_RA_INFO_DUMP:
{
- u8 entry_id = *((u8 *)pValue);
if (check_fwstate(&Adapter->mlmepriv, _FW_LINKED)) {
- DBG_88E("============ RA status check ===================\n");
- DBG_88E("Mac_id:%d , RateID = %d, RAUseRate = 0x%08x, RateSGI = %d, DecisionRate = 0x%02x ,PTStage = %d\n",
- entry_id,
- haldata->odmpriv.RAInfo[entry_id].RateID,
- haldata->odmpriv.RAInfo[entry_id].RAUseRate,
- haldata->odmpriv.RAInfo[entry_id].RateSGI,
- haldata->odmpriv.RAInfo[entry_id].DecisionRate,
- haldata->odmpriv.RAInfo[entry_id].PTStage);
}
}
break;
@@ -1493,15 +1460,12 @@ void SetHalDefVar8188EUsb(struct adapter *Adapter, enum hal_def_variable eVariab
if (dm_func == 0) { /* disable all dynamic func */
podmpriv->SupportAbility = DYNAMIC_FUNC_DISABLE;
- DBG_88E("==> Disable all dynamic function...\n");
} else if (dm_func == 1) {/* disable DIG */
podmpriv->SupportAbility &= (~DYNAMIC_BB_DIG);
- DBG_88E("==> Disable DIG...\n");
} else if (dm_func == 2) {/* disable High power */
podmpriv->SupportAbility &= (~DYNAMIC_BB_DYNAMIC_TXPWR);
} else if (dm_func == 3) {/* disable tx power tracking */
podmpriv->SupportAbility &= (~DYNAMIC_RF_CALIBRATION);
- DBG_88E("==> Disable tx power tracking...\n");
} else if (dm_func == 5) {/* disable antenna diversity */
podmpriv->SupportAbility &= (~DYNAMIC_BB_ANT_DIV);
} else if (dm_func == 6) {/* turn on all dynamic func */
@@ -1510,7 +1474,6 @@ void SetHalDefVar8188EUsb(struct adapter *Adapter, enum hal_def_variable eVariab
pDigTable->CurIGValue = rtw_read8(Adapter, 0xc50);
}
podmpriv->SupportAbility = DYNAMIC_ALL_FUNC_ENABLE;
- DBG_88E("==> Turn on all dynamic function...\n");
}
}
break;
@@ -1574,8 +1537,6 @@ void UpdateHalRAMask8188EUsb(struct adapter *adapt, u32 mac_id, u8 rssi_level)
rate_bitmap = 0x0fffffff;
rate_bitmap = ODM_Get_Rate_Bitmap(&haldata->odmpriv, mac_id, mask, rssi_level);
- DBG_88E("%s => mac_id:%d, networkType:0x%02x, mask:0x%08x\n\t ==> rssi_level:%d, rate_bitmap:0x%08x\n",
- __func__, mac_id, networkType, mask, rssi_level, rate_bitmap);
mask &= rate_bitmap;
@@ -1589,7 +1550,6 @@ void UpdateHalRAMask8188EUsb(struct adapter *adapt, u32 mac_id, u8 rssi_level)
if (shortGIrate)
arg |= BIT(5);
mask |= ((raid << 28) & 0xf0000000);
- DBG_88E("update raid entry, mask=0x%x, arg=0x%x\n", mask, arg);
psta->ra_mask = mask;
mask |= ((raid << 28) & 0xf0000000);
diff --git a/drivers/staging/r8188eu/hal/usb_ops_linux.c b/drivers/staging/r8188eu/hal/usb_ops_linux.c
index b7b51af7f2c3..2f3cdc356d2a 100644
--- a/drivers/staging/r8188eu/hal/usb_ops_linux.c
+++ b/drivers/staging/r8188eu/hal/usb_ops_linux.c
@@ -210,7 +210,6 @@ static int recvbuf2recvframe(struct adapter *adapt, struct sk_buff *pskb)
precvframe = rtw_alloc_recvframe(pfree_recv_queue);
if (!precvframe) {
- DBG_88E("%s()-%d: rtw_alloc_recvframe() failed! RX Drop!\n", __func__, __LINE__);
goto _exit_recvbuf2recvframe;
}
@@ -223,8 +222,6 @@ static int recvbuf2recvframe(struct adapter *adapt, struct sk_buff *pskb)
pattrib = &precvframe->attrib;
if ((pattrib->crc_err) || (pattrib->icv_err)) {
- DBG_88E("%s: RX Warning! crc_err=%d icv_err=%d, skip!\n", __func__, pattrib->crc_err, pattrib->icv_err);
-
rtw_free_recvframe(precvframe, pfree_recv_queue);
goto _exit_recvbuf2recvframe;
}
@@ -235,7 +232,6 @@ static int recvbuf2recvframe(struct adapter *adapt, struct sk_buff *pskb)
pkt_offset = RXDESC_SIZE + pattrib->drvinfo_sz + pattrib->shift_sz + pattrib->pkt_len;
if ((pattrib->pkt_len <= 0) || (pkt_offset > transfer_len)) {
- DBG_88E("%s()-%d: RX Warning!,pkt_len<=0 or pkt_offset> transfoer_len\n", __func__, __LINE__);
rtw_free_recvframe(precvframe, pfree_recv_queue);
goto _exit_recvbuf2recvframe;
}
@@ -276,7 +272,6 @@ static int recvbuf2recvframe(struct adapter *adapt, struct sk_buff *pskb)
precvframe->rx_data = pkt_copy->data;
} else {
if ((pattrib->mfrag == 1) && (pattrib->frag_num == 0)) {
- DBG_88E("recvbuf2recvframe: alloc_skb fail , drop frag frame\n");
rtw_free_recvframe(precvframe, pfree_recv_queue);
goto _exit_recvbuf2recvframe;
}
@@ -287,7 +282,6 @@ static int recvbuf2recvframe(struct adapter *adapt, struct sk_buff *pskb)
precvframe->rx_data = precvframe->rx_tail;
precvframe->rx_end = pbuf + pattrib->drvinfo_sz + RXDESC_SIZE + alloc_sz;
} else {
- DBG_88E("recvbuf2recvframe: skb_clone fail\n");
rtw_free_recvframe(precvframe, pfree_recv_queue);
goto _exit_recvbuf2recvframe;
}
@@ -341,7 +335,6 @@ void rtl8188eu_recv_tasklet(unsigned long priv)
while (NULL != (pskb = skb_dequeue(&precvpriv->rx_skb_queue))) {
if ((adapt->bDriverStopped) || (adapt->bSurpriseRemoved)) {
- DBG_88E("recv_tasklet => bDriverStopped or bSurpriseRemoved\n");
dev_kfree_skb_any(pskb);
break;
}
@@ -362,9 +355,6 @@ static void usb_read_port_complete(struct urb *purb, struct pt_regs *regs)
if (adapt->bSurpriseRemoved || adapt->bDriverStopped || adapt->bReadPortCancel) {
precvbuf->reuse = true;
- DBG_88E("%s() RX Warning! bDriverStopped(%d) OR bSurpriseRemoved(%d) bReadPortCancel(%d)\n",
- __func__, adapt->bDriverStopped,
- adapt->bSurpriseRemoved, adapt->bReadPortCancel);
return;
}
@@ -372,7 +362,6 @@ static void usb_read_port_complete(struct urb *purb, struct pt_regs *regs)
if ((purb->actual_length > MAX_RECVBUF_SZ) || (purb->actual_length < RXDESC_SIZE)) {
precvbuf->reuse = true;
rtw_read_port(adapt, (unsigned char *)precvbuf);
- DBG_88E("%s()-%d: RX Warning!\n", __func__, __LINE__);
} else {
rtw_reset_continual_urb_error(adapter_to_dvobj(adapt));
@@ -388,7 +377,6 @@ static void usb_read_port_complete(struct urb *purb, struct pt_regs *regs)
rtw_read_port(adapt, (unsigned char *)precvbuf);
}
} else {
- DBG_88E("###=> usb_read_port_complete => urb status(%d)\n", purb->status);
skb_put(precvbuf->pskb, purb->actual_length);
precvbuf->pskb = NULL;
@@ -409,7 +397,6 @@ static void usb_read_port_complete(struct urb *purb, struct pt_regs *regs)
rtw_read_port(adapt, (unsigned char *)precvbuf);
break;
case -EINPROGRESS:
- DBG_88E("ERROR: URB IS IN PROGRESS!/n");
break;
default:
break;
@@ -449,7 +436,6 @@ u32 rtw_read_port(struct adapter *adapter, u8 *rmem)
if (!precvbuf->reuse || !precvbuf->pskb) {
precvbuf->pskb = netdev_alloc_skb(adapter->pnetdev, MAX_RECVBUF_SZ + RECVBUFF_ALIGN_SZ);
if (!precvbuf->pskb) {
- DBG_88E("#### usb_read_port() alloc_skb fail!#####\n");
return _FAIL;
}
@@ -487,8 +473,6 @@ u32 rtw_read_port(struct adapter *adapter, u8 *rmem)
err = usb_submit_urb(purb, GFP_ATOMIC);
if ((err) && (err != (-EPERM))) {
- DBG_88E("cannot submit rx in-token(err = 0x%08x),urb_status = %d\n",
- err, purb->status);
ret = _FAIL;
}
@@ -508,7 +492,6 @@ void rtl8188eu_xmit_tasklet(unsigned long priv)
if ((adapt->bDriverStopped) ||
(adapt->bSurpriseRemoved) ||
(adapt->bWritePortCancel)) {
- DBG_88E("xmit_tasklet => bDriverStopped or bSurpriseRemoved or bWritePortCancel\n");
break;
}
--
2.34.1
Hi Phillip,
I love your patch! Perhaps something to improve:
[auto build test WARNING on staging/staging-testing]
url: https://github.com/0day-ci/linux/commits/Phillip-Potter/staging-r8188eu-Cleanup-and-removal-of-DBG_88E-macro/20220216-090900
base: https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git e9685834b1db754cbd07e31ad1a091f5d366dacf
config: x86_64-allyesconfig (https://download.01.org/0day-ci/archive/20220217/[email protected]/config)
compiler: clang version 15.0.0 (https://github.com/llvm/llvm-project 0e628a783b935c70c80815db6c061ec84f884af5)
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# https://github.com/0day-ci/linux/commit/b481114992de793aca50ace1616b6b3947fde0a0
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Phillip-Potter/staging-r8188eu-Cleanup-and-removal-of-DBG_88E-macro/20220216-090900
git checkout b481114992de793aca50ace1616b6b3947fde0a0
# save the config file to linux build tree
mkdir build_dir
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross W=1 O=build_dir ARCH=x86_64 SHELL=/bin/bash drivers/leds/ drivers/net/ethernet/mellanox/mlxsw/ drivers/platform/chrome/ drivers/staging/r8188eu/ mm/damon/
If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <[email protected]>
All warnings (new ones prefixed by >>):
>> drivers/staging/r8188eu/hal/usb_halinit.c:1546:6: warning: variable 'arg' set but not used [-Wunused-but-set-variable]
u8 arg;
^
1 warning generated.
vim +/arg +1546 drivers/staging/r8188eu/hal/usb_halinit.c
8cd574e6af5463a Phillip Potter 2021-07-28 1490
b561d2f0dc01ab0 Michael Straube 2021-09-06 1491 void UpdateHalRAMask8188EUsb(struct adapter *adapt, u32 mac_id, u8 rssi_level)
8cd574e6af5463a Phillip Potter 2021-07-28 1492 {
8cd574e6af5463a Phillip Potter 2021-07-28 1493 u8 init_rate = 0;
8cd574e6af5463a Phillip Potter 2021-07-28 1494 u8 networkType, raid;
8cd574e6af5463a Phillip Potter 2021-07-28 1495 u32 mask, rate_bitmap;
8cd574e6af5463a Phillip Potter 2021-07-28 1496 u8 shortGIrate = false;
8cd574e6af5463a Phillip Potter 2021-07-28 1497 int supportRateNum = 0;
8cd574e6af5463a Phillip Potter 2021-07-28 1498 struct sta_info *psta;
d904512db6f3727 Michael Straube 2021-12-07 1499 struct hal_data_8188e *haldata = &adapt->haldata;
8cd574e6af5463a Phillip Potter 2021-07-28 1500 struct mlme_ext_priv *pmlmeext = &adapt->mlmeextpriv;
6839ff57baa4a60 Michael Straube 2021-08-09 1501 struct mlme_ext_info *pmlmeinfo = &pmlmeext->mlmext_info;
6839ff57baa4a60 Michael Straube 2021-08-09 1502 struct wlan_bssid_ex *cur_network = &pmlmeinfo->network;
8cd574e6af5463a Phillip Potter 2021-07-28 1503
8cd574e6af5463a Phillip Potter 2021-07-28 1504 if (mac_id >= NUM_STA) /* CAM_SIZE */
8cd574e6af5463a Phillip Potter 2021-07-28 1505 return;
8cd574e6af5463a Phillip Potter 2021-07-28 1506 psta = pmlmeinfo->FW_sta_info[mac_id].psta;
725a3f1c4d56b73 Michael Straube 2021-08-01 1507 if (!psta)
8cd574e6af5463a Phillip Potter 2021-07-28 1508 return;
8cd574e6af5463a Phillip Potter 2021-07-28 1509 switch (mac_id) {
8cd574e6af5463a Phillip Potter 2021-07-28 1510 case 0:/* for infra mode */
8cd574e6af5463a Phillip Potter 2021-07-28 1511 supportRateNum = rtw_get_rateset_len(cur_network->SupportedRates);
8cd574e6af5463a Phillip Potter 2021-07-28 1512 networkType = judge_network_type(adapt, cur_network->SupportedRates, supportRateNum) & 0xf;
8cd574e6af5463a Phillip Potter 2021-07-28 1513 raid = networktype_to_raid(networkType);
8cd574e6af5463a Phillip Potter 2021-07-28 1514 mask = update_supported_rate(cur_network->SupportedRates, supportRateNum);
6839ff57baa4a60 Michael Straube 2021-08-09 1515 mask |= (pmlmeinfo->HT_enable) ? update_MSC_rate(&pmlmeinfo->HT_caps) : 0;
6839ff57baa4a60 Michael Straube 2021-08-09 1516 if (support_short_GI(adapt, &pmlmeinfo->HT_caps))
8cd574e6af5463a Phillip Potter 2021-07-28 1517 shortGIrate = true;
8cd574e6af5463a Phillip Potter 2021-07-28 1518 break;
8cd574e6af5463a Phillip Potter 2021-07-28 1519 case 1:/* for broadcast/multicast */
8cd574e6af5463a Phillip Potter 2021-07-28 1520 supportRateNum = rtw_get_rateset_len(pmlmeinfo->FW_sta_info[mac_id].SupportedRates);
8cd574e6af5463a Phillip Potter 2021-07-28 1521 if (pmlmeext->cur_wireless_mode & WIRELESS_11B)
8cd574e6af5463a Phillip Potter 2021-07-28 1522 networkType = WIRELESS_11B;
8cd574e6af5463a Phillip Potter 2021-07-28 1523 else
8cd574e6af5463a Phillip Potter 2021-07-28 1524 networkType = WIRELESS_11G;
8cd574e6af5463a Phillip Potter 2021-07-28 1525 raid = networktype_to_raid(networkType);
8cd574e6af5463a Phillip Potter 2021-07-28 1526 mask = update_basic_rate(cur_network->SupportedRates, supportRateNum);
8cd574e6af5463a Phillip Potter 2021-07-28 1527 break;
8cd574e6af5463a Phillip Potter 2021-07-28 1528 default: /* for each sta in IBSS */
8cd574e6af5463a Phillip Potter 2021-07-28 1529 supportRateNum = rtw_get_rateset_len(pmlmeinfo->FW_sta_info[mac_id].SupportedRates);
8cd574e6af5463a Phillip Potter 2021-07-28 1530 networkType = judge_network_type(adapt, pmlmeinfo->FW_sta_info[mac_id].SupportedRates, supportRateNum) & 0xf;
8cd574e6af5463a Phillip Potter 2021-07-28 1531 raid = networktype_to_raid(networkType);
8cd574e6af5463a Phillip Potter 2021-07-28 1532 mask = update_supported_rate(cur_network->SupportedRates, supportRateNum);
8cd574e6af5463a Phillip Potter 2021-07-28 1533
8cd574e6af5463a Phillip Potter 2021-07-28 1534 /* todo: support HT in IBSS */
8cd574e6af5463a Phillip Potter 2021-07-28 1535 break;
8cd574e6af5463a Phillip Potter 2021-07-28 1536 }
8cd574e6af5463a Phillip Potter 2021-07-28 1537
8cd574e6af5463a Phillip Potter 2021-07-28 1538 rate_bitmap = 0x0fffffff;
8cd574e6af5463a Phillip Potter 2021-07-28 1539 rate_bitmap = ODM_Get_Rate_Bitmap(&haldata->odmpriv, mac_id, mask, rssi_level);
8cd574e6af5463a Phillip Potter 2021-07-28 1540
8cd574e6af5463a Phillip Potter 2021-07-28 1541 mask &= rate_bitmap;
8cd574e6af5463a Phillip Potter 2021-07-28 1542
8cd574e6af5463a Phillip Potter 2021-07-28 1543 init_rate = get_highest_rate_idx(mask) & 0x3f;
8cd574e6af5463a Phillip Potter 2021-07-28 1544
8cd574e6af5463a Phillip Potter 2021-07-28 1545 if (haldata->fw_ractrl) {
8cd574e6af5463a Phillip Potter 2021-07-28 @1546 u8 arg;
8cd574e6af5463a Phillip Potter 2021-07-28 1547
8cd574e6af5463a Phillip Potter 2021-07-28 1548 arg = mac_id & 0x1f;/* MACID */
8cd574e6af5463a Phillip Potter 2021-07-28 1549 arg |= BIT(7);
8cd574e6af5463a Phillip Potter 2021-07-28 1550 if (shortGIrate)
8cd574e6af5463a Phillip Potter 2021-07-28 1551 arg |= BIT(5);
8cd574e6af5463a Phillip Potter 2021-07-28 1552 mask |= ((raid << 28) & 0xf0000000);
8cd574e6af5463a Phillip Potter 2021-07-28 1553 psta->ra_mask = mask;
8cd574e6af5463a Phillip Potter 2021-07-28 1554 mask |= ((raid << 28) & 0xf0000000);
8cd574e6af5463a Phillip Potter 2021-07-28 1555
8cd574e6af5463a Phillip Potter 2021-07-28 1556 /* to do ,for 8188E-SMIC */
8cd574e6af5463a Phillip Potter 2021-07-28 1557 rtl8188e_set_raid_cmd(adapt, mask);
8cd574e6af5463a Phillip Potter 2021-07-28 1558 } else {
6839ff57baa4a60 Michael Straube 2021-08-09 1559 ODM_RA_UpdateRateInfo_8188E(&haldata->odmpriv,
8cd574e6af5463a Phillip Potter 2021-07-28 1560 mac_id,
8cd574e6af5463a Phillip Potter 2021-07-28 1561 raid,
8cd574e6af5463a Phillip Potter 2021-07-28 1562 mask,
8cd574e6af5463a Phillip Potter 2021-07-28 1563 shortGIrate
8cd574e6af5463a Phillip Potter 2021-07-28 1564 );
8cd574e6af5463a Phillip Potter 2021-07-28 1565 }
8cd574e6af5463a Phillip Potter 2021-07-28 1566 /* set ra_id */
8cd574e6af5463a Phillip Potter 2021-07-28 1567 psta->raid = raid;
8cd574e6af5463a Phillip Potter 2021-07-28 1568 psta->init_rate = init_rate;
8cd574e6af5463a Phillip Potter 2021-07-28 1569 }
8cd574e6af5463a Phillip Potter 2021-07-28 1570
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/[email protected]